Lock Parts Keys Key Insertion Front Unit Rear Unit

Lock Parts Keys Key Insertion Front Unit Rear Unit
Product Guide
Standard Keypad
Latch Mechanism
Assigned Use Functionality
Axis locks with a keypad interface are operated by a 4-digit User Code or by an ADA compliant User Key. Manager Keys provide management
access and external power. Programming is accomplished via a Programming Key unique to the lock system. An optional mobile application
tool simplifies lock system management and provides audit trail.
Lock Parts
Front Unit
Rear Unit
Connection Options
Cover Plate
Key Button
C Button
Key Slot
Key Button
C Button
Key Slot
LED Usage
Indicator
Pull Handle
Standard
Cable
Lock Mounting Holes
Alpha Numeric
Keypad
Cover Plate
Screws
Pull Handle
Pin
1/2" (12.7 mm)
Deadlatch
Advanced Security
Vertical
Keys
Operates the lock
Overrides user access
User Key
Manager Key*
Programming Key**
•
•
•
•
•
•
•
•
•
•
Allows management inspection
Provides external power
Registers Manager Keys
•
Assigns user credential
*Up to 25 Manager Keys may be registered to each lock
**1 Programming Key allowed per lock group
Key Insertion
Standard
Vertical
Next logo must face up on standard and vertical body locks.
1
Product Guide
Standard Keypad
Latch Mechanism
Assigned Use Functionality
Setup
Locks are shipped with factory default settings (only operates by pressing = `). Setup must be completed to register the Programming
Key and Manager Keys to all the locks.
1
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn on.
2
Insert one Manager Key at a time.
A two-tone beep will be heard for
each Manager Key registered.
3
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
4
Repeat above steps for each lock
or follow instructions to Express
Register Manager Keys to setup
all locks.
Programming Instructions
Express Register Manager Keys
The Programming Key can quickly register the same Manager Keys to operate multiple locks.
1
2
Go to the lock already registered to operate with the Manager Keys.
Press =` 66 `.
The LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
3
At each lock to be registered, insert the Programming Key.
A two-tone beep will be heard and the LED will flash once to indicate
successful registration.
2
4a
4b
End express registration mode.
Go to any registered lock.
Press =` then insert the Programming Key.
Product Guide
Standard Keypad
Latch Mechanism
Assigned Use Functionality
Programming Instructions
Add Manager Keys
Manager Keys can be registered to the locks at any time.
1
2
3
4
Go to a lock requiring additional
Manager Keys.
Press =` 55 `.
The LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard.
Insert each additional Manager
Key one at a time.
A two-tone beep will be heard for
each Manager Key registered.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Repeat above steps for each lock
or follow instructions to Express
Register Manager Keys to
register the same Manager Keys
to multiple locks.
Replace Keys
Replacement keys must be purchased and registered to the locks to prevent the lost/stolen keys from operating a lock.
1
2
To replace the Programming Key:
Note the order number (found on the lock’s rear unit).
1a
To replace the Manager Keys:
1b
Collect all remaining Manager Keys.
Go to any lock operated by the Manager Keys.
Press =` 55 `.
Contact Digilock Support to purchase a replacement Programming Key.
2a
2b
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
Insert the Programming Key again.
Three sets of two-tone beeps will be heard and the LED will turn off. All
previously registered Manager Keys are erased.
Follow instructions to Add Manager Keys to register the remaining Manager
Keys to the locks.
3
Product Guide
Standard Keypad
Latch Mechanism
Assigned Use Functionality
Programming Instructions
Assign the User Credential
Once a user credential is assigned, the previously assigned user credential will no longer operate the lock.
1a
1b
Assign a User Code:
Default user code 1234
Press =` then insert a registered Manager Key.
The LED will turn on.
1a
Assign a User Key:
1b
Press =` then insert a registered Manager Key.
The LED will turn on.
4
2a
2b
Press = [new 4-digit code] `. A two-tone beep will be heard.
Press = [the same 4-digit code] `.
Two sets of two-tone beeps will be heard and the LED will turn off.
2
Insert a User Key.
A two-tone beep will be heard and the LED will turn off.
Product Guide
Standard Keypad
Latch Mechanism
Assigned Use Functionality
Operating Instructions - In Assigned Use Functionality
In assigned use functionality, users unlock their assigned locker with either their 4-digit User Code or User Key. To reassign a locker to a
different user, follow instructions to Assign the User Credential.
1
1
Operate with the User Code
Operate with the User Key
1
1
Operate with a Manager Key
Operate with the Programming Key
To unlock: Press = [assigned 4-digit code] `.*
To relock: Close the door.
To unlock: Insert a registered Manager Key.
To relock: Close the door.
To unlock: Insert the assigned User Key.
To relock: Close the door.
To unlock: Press =` then insert the Programming Key.
To relock: Close the door.
*After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).
5
Product Guide
Standard Keypad
Latch Mechanism
Assigned Use Functionality
Support
Sleep Mode
After three consecutive incorrect User Code entries to unlock, the lock will go into “Sleep Mode” for one minute and for an additional minute
for each subsequent incorrect entry. The keypad is disabled while in “Sleep Mode”. A registered Manager Key may be used to unlock while
the lock is in “Sleep Mode”.
Error Condition Indicators
10 rapid beeps:
The lock is binding which means that either door alignment or items in the locker are preventing the lock from operating. Press on the door
while operating the lock. If error condition persists, contact Digilock support for assistance.
2 sets of three beeps:
The batteries are low. Replace the batteries.
Does not Unlock with the User Code or User Key
The lock does not recognize the User Code or User Key. For immediate access, operate with a registered Manager Key. Follow instructions
to Assign the User Credential to assign a new User Code or User Key to the lock.
Does not Operate with a Manager Key
The lock does not recognize the Manager Key. Follow instructions to Add Manager Keys to register the Manager Key to the lock. For
immediate access, operate with another registered Manager Key or with the Programming Key.
Does not Operate with the Programming Key
The lock does not recognize the Programming Key. If the Programming Key has been replaced, operate with the Replacement
Programming Key. Contact Digilock support for additional assistance.
No Audible Feedback when = is Pressed
▪▪ T
he lock may be in “Sleep Mode” or the batteries may need to be replaced. For immediate access, operate with a registered
Manager Key.
▪▪ T
he front unit may not be properly connected to the rear unit. Remove the lock from the door and check the connection.
Battery Replacement
(shown with cable rear unit)
It is not necessary to uninstall the lock from the door.
1
2
Remove the screws and the cover plate.
Pull the battery pack from the rear housing.
Replace with four premium alkaline
AA batteries.
111716
PG-NLSK-AP-DEN
3
Place the battery pack back into the rear
housing and screw cover plate in place.
Phone: 707 766 6000
www.digilock.com | sales@digilock.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising