Besam Revolving Door - RD3L

Besam Revolving Door - RD3L
Besam Revolving Door - RD3L
Technical Data Sheet
A high-capacity Revolving Door Entrance
Easy smooth access
The RD3L range of large three-wing automatic revolving doors has been designed to achieve high pedestrian
traffic flow whilst main­taining Besam's recognized high
standard of safety for the user.
The door is designed so that operation is not affected or
interrupted by winds or by users pushing the door wings.
However, in emergency situations, the doors are released
immediately to facilitate escape.
The large-sized compartments, which are always accessible due to the 3-wing configuration, make the RD3L
an ideal solution for continuous high-volume pedestrian
traffic, while comfortably accommodating wheeled traffic
such as shopping carts, luggage trolleys and wheelchairs.
The Besam RD3L range is versatile, available in different diameters, and is delivered as standard in counterclockwise rotation.
ASSA ABLOY, the global leader in door opening solutions
Design
Material and standard equipment
• Prefabricated with aluminium extrusions.
• Curved glass: 4 + 4 mm clear laminated
Flat glass: 3 + 3 mm clear laminated
Other types of glass available
• Ceiling of white laminated panels
• Push button inside, the door will rotate 360° (1)
• Concealed activation units (2)
•
•
•
•
•
•
•
Dust protection roof (3)
Vertical presence sensor above the right entrance post (4)
Program Control Device (PCD) with key switch (5)
Emergency stop button (6)
Push-button for reduced speed rotation (7)
Main control unit CDC (8)
Door leaves with break-out function (9)
3
2
2
4
FF22
0022
C
FUN
FUNC
A
DAT
DATA
3
11 22 3
6
44 55 6
9
77 88 9
↑↑ 00 ++
↓↓ ## ––
C
FF SS C
5
1
F2
F2
02
02
NCY
EMERGE
STOP
FUNC
FUNC
DATA
DATA
3
11 22 3
6
44 55 6
9
77 88 9
↑↑ 00 ++
↓↓ ## ––
C
FF SS C
6
7
8
9
Night Closing Door (NCD)
When in the open position, the night closing door’s unique
one-door-leaf solution fits securely and close to the outer
wall sections without obstructing passing traffic, and parks
safely on the opposite side to the closing mullion. The
door can be slid closed, sealing off the entrance for security at night or after business hours.
Drive system
The CDC control system is a state-of-the-art and unique
system designed to ensure the lowest operating/maintenance cost and highest safety.
The system is equipped with automatic diagnostics that
can be stored in an event log. The door system can be
easily connected to Besam service by phone or modem to
ensure minimum down-time.
The control system, combined with the patented drive
system located on the periphery, results in low stresses to
the unit and therefore reduces maintenance costs.
Safety the highest priority
The system is designed for non-touch and supervised
safety.
User safety features:
• Non-touch safety sensors placed horizontally on the
door leaves
Stops the door (A)
Slows down the door speed to 0.5 rpm (B)
• Compressible vertical/horizontal safety switches placed
on the leading edges of the rotating section
Stops the rotation of the door (C)
• Emergency stop button
• Vertical presence sensor above the right entrance post
• Force-sensitive door leaf
• Speed control
• Active motor brake
• Active electromechanical brake
National standards may influence the choice of safety
functions.
Evacuation path
The revolving door can be linked to the fire alarm system.
In the case of power failure or fire alarm, the doors will
automatically stop rotating and release the door leaves.
This allows the door leaves to be manually broken out,
giving a clear unimpeded evacuation path.
Safety systems
The safety systems of the RD3L range have been tested
by authorized/accredited laboratories to meet DIN 18650
as a minimum requirement.
ILL-02282
C
B
C
A
Installation
The RD3L is designed to be placed and fixed directly onto
the finished floor surface.
Vertical sections
Outer wall
Mid rail
Door leaf
Mid rail
Horizontal sections
C
x
TW
D
ILL-02143
Product
name
DT
D
D NCD TW
H
(outer)
(inner)
(outer)
standard 2200 standard 340
RD3L 54
5484
5400
5556
2592
2000-2600
RD3L 62
6284
6200
6351
2992
2000-2600
Accessories and Options
• Besam activators
• Powder-coated finish (RAL colours)
• Anodizing
• Stainless steel cladding
• Additional emergency stop
• Electro-mechanical lock
• Remote control
• Modem
• Spotlights or downlights
• Midrails
• Footrails
• Sheet metal sandwich panel instead of glass
• Water-resistant cover
• Internal height non-standard (max. 2600 mm)
• Fascia height non-standard (max. 1250 mm)
• Insulated fascia
• Direction sensing radar
• Clockwise rotation
• Night closing door
• Special load bearing roof
• Integrated air curtain
Rotation speed adjustment
• High speed settings according to DIN 18650
• Adjustable low speed
F
X
RPM
Persons/
Persons/ Trolleys/
(750 mm/s) compartment hour
compartment
340-1250
1510
2.7
9
4370
2
340-1250
1777
2.3
12
4970
3
Operating modes
• Programme selector operated by access code
-Autostart
-Continuous rotation on low speed, automatic start-up
to high speed when impulse is activated
-Manual override, forward or reverse
-Closed (locked)
-Summer position
• Real time operation
Technical specifications
• Power supply: 200-240 V, 50-60 Hz
• Mains fuse: 10 A
• Power consumption:
-Drive unit 600 W
-Spotlights 500 W
-Downlights 300 W
Approvals
• CE marked
• Complies with the Machinery Directive (98/37/EC),
the Low Voltage Directive (2006/95/EC) and the
Electromagnetic Compatibility Directive (2004/108/EC)
• Meets the requirements according to DIN 18650
This equipment should be installed, regularly inspected, maintained and serviced by trained and authorized personnel.
Preventive maintenance plans are highly recommended for a proper and safe operation. Talk to your Besam representative!
Besam Export AB, Box 669, SE-261 25 Landskrona, Sweden
Tel: +46 418 514 00 Fax: +46 418 513 55
export@besam.se • www.besam.com
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
1005362-EI-2.0 – Issue 2010-02-16 – Rights reserved for modifications of design and dimensions.
© All rights in and to this material are the sole property of ASSA ABLOY Entrance Systems AB. Copying, scanning, alterations or modifications are expressly forbidden without the prior written consent of the applicable company within ASSA ABLOY Entrance Systems AB.
H
F
DT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising