Print - www.heatilator.com/~/media/Files/Heatilator/Product

Print - www.heatilator.com/~/media/Files/Heatilator/Product
 neatilator
e Jar st nggne in fireplaces
a
La
re i
£ ne
icon
direct vent gas fireplace
over: IDV4833IT shown with Avalon cast
nd, overmantel, hearth kit and Salem front.
Left: IDV6247IH shown with New Venetian Gold
granite, Portfolio front, andirons and custom mantel.
Enjoy a grand fire!
The lcon direct vent gas fireplace is the quintessential true masonry look in a direct vent fireplace. The large size
and clean face makes a statement in any room and meets today’s interior design trends. The direct vent system
provides higher efficiencies and preserves indoor air quality. The Icon direct vent is a true masonry look coupled
with the clean, convenience of gas. Finish your fireplace with one of two optional fronts in two finishes.
IntelliFir
back-up battery system to run the fireplace during a power outage.
The perfect fireplace choice for that custom home
Can be installed in a flush hearth
Finishing material can be brought up to opening to
minimize visible steel
Your choice of traditional or herringbone refractory
standard
Top direct vent allows installation along interior or
exterior walls, below grade, or in corners
Choose from two optional unique front faces to
create just the right look
Optional Heat Zones or Heat Ducts available to
route some heat into other rooms of the home
BTU/hour input:
IDV4833!: 33,500 - 48,000
IDV6E247|: 40,000 - 59,000
Certified for installation in bedrooms; direct vent
models also certified for mobile homes
Direct vent models preserve Indoor Air Quality (IAQ)
and provide efficient zone heating
UL tested and listed
Our exclusive, state-of-the-art, IntelliFire ignition system reduces gas consumption and
= thermogenerator wear by providing a pilot flame only when needed. It also supplies a
Front & Door Options
=
| 1 | | |
i 1 Т 1 1
aL des = ms
,‘ Л 1
Portfolio Decorative Front and Andirons
Icon DV fronts are available in
black or bronze finishes.
ul |
Black (BK) Bronze (BZ)
Salem Decorative Front and Andirons
| Pr ES
Refractory Options
Additional Options Not Pictured
e (as conversion kits
* Heat zone and heat duct kits
e Mantels and surrounds
Venting
e Direct vent: DVP pipe
Traditional
Herringbone
Control Options
a a 7 a Ш E ui
Vu [ae oO Z e oc <
x ÈS | 52 E wd | wg | 8 5 = а
CONTROL R= E Es on = z< ох > <© ofa >
uUz © Ee) Ч <I> = > ) me =0 cr
pue) o Ta a LO mE a i a > Ш
< 50 pm mz < e) Q Q x = T =
<< < FE FH
WSK200-HTL Wall ° ° ° ° °
WSK-MLT-HTL Wall ° ° ° ° ° ° e
SMART-STAT-HTL Remote ° e ° °
gr
WSK200-HTL i WSK-MLT-HTL 1 à Smart-Stat-HTL
Wall Switch ; Wall Switch Cm Remote Control
e «o
Eco Г
Models Available
MODEL BTU/HR INPUT (NG) OPENING SIZE VENTING IGNITION SYSTEM FUEL
IDV4833| 33,500 - 48,000 33" x 32-1/2" (mm) Direct Vent IntelliFire NG / LP
IDV6247I 40,000 - 59,000 47" x 38" (mm) Direct Vent IntelliFire NG / LP
U.S. Efficiencies
Steady State - Since most homeowners use their fireplaces for an extended time while they are in the RATING IDV483311 | IDV48331IL IDV62471 IDV6247IL
room, Steady State measures how efficiently your fireplace converts fuel to heat once it is warmed up and Steady State 75% 76% 82% 82%
running in a “steady state”. AFUE 48% 52% | 59% | 62%
AFUE - AFUE rating is more typically used with appliances, like your furnace, that continually cycle on and
off to maintain a constant temperature.
Canada Efficiencies
EnerGuide (CSA P.4.1-02) - EnerGuide is a rating used in Canada to measure annual fireplace efficiency.
Exceptional Value | Dependability | Most Recognized Brand
RATING
IDV483311
IDV48331IL
IDV62471
IDV6247IL
re
Technical Specifications
MODEL
IDV4833I
FRONT WIDTH (A)
46-1/2” (1181mm)
BACK WIDTH (C)
27-5/8" (702mm)
HEIGHT
44-3/8" (1127mm)
29-1/2" (749mm)
FRONT (B/D)
33”w x 34-1/2”h
IDV6247I
60-1/2" (1537mm)
41-5/8" (1057mm)
48-7/8" (1241mm)
29-1/2" (749mm)
47”w x 39”h
Left Side Right Side
29-1/2 in.
21-1/2 in.
Clearances Framing
MODEL MODEL ROUGH OPENING
(WIDTH)
47-1/2"
(1207mm)
61-1/2"
(1562mm)
ROUGH OPENING
(HEIGHT)
45-1/2"
(1156mm)
50"
(1270mm)
ROUGH OPENING
(DEPTH)
30-1/2"
(775mm)
30-1/2"
(775mm)
ROUGH OPENING
(DVP PIPE)
10"
(254mm)
10"
(254mm)
47-1/2"
(1207mm)
64-1/4"
(1632mm)
30-172"
(775mm)
48-1/2"
(1232mm)
90-7/8" 48'
IDV4833I (2309mm) (1219mm)
IDV4833I
61-1/2"
(1562mm)
74-1/8"
(1883mm)
30-1/2"
(775mm)
62-1/2"
(1588mm)
104-7/8" 48"
IDV6247I (104-7/8mm) (1219mm)
IDV6247I
„=
L |
UN
и
D
Alcove
Installation
1-1/2 in. (38 mm)
min.
appliance —
to combustibles
a,
A
Top Vent
One 90° Elbow
Horiz Term
Top Vent
One 90° Elbow
Horiz Term
A
Ш
The rough framing dimensions shown represent the distance from stud to stud only and do not take into consideration the addition of drywall. Please refer to installation
instructions for complete specifications and drawings when installing this product. Go to heatilator.com to download.
neatilator
a brand of
Hearth & Home Technologies Inc.®
Limited Lifetime Warranty*
The strongest in the industry, Heatilator provides a
limited lifetime warranty on gas-burning products of the
most important aspects: firebox and heat exchanger.
Available From
The information provided in this literature is for planning
purposes only and subject to change. Please consult
the installation manual for actual installation. Actual
product appearance may differ from product images.
*For full warranty details go to heatilator.com.
ENER(SUIDE
Look for the EnerGuide
Gas Fireplace Ener
Efficiency Rating in this brochure
1915 West Saunders Street
Mt. Pleasant, lowa 52641
800-927-6841 | heatilator.com
LH US LISTED
HTL-1028U-0810
Based on CSA P4.1-02
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising