AC Current Probe Model SR601

AC Current Probe Model SR601
AC Current Probe
Model SR601
The Model SR601 is designed for use
in ­industrial and ­utility environments.
The unique ergonomic design allows it
to ­easily clamp onto cables or small
bus bars. It is built to the highest safety
and performance ­standards including
the CE Mark and is UL approved for
Canada and United States.
Excellent transformation and low
phase shift, plus a broad frequency
response, permit accurate measurements of current for power and power
quality measurements. The high
­quality magnetic cores and uniform
windings provide sensitivity for very
low level current measurements, as
well as measurements up to 1200Aac.
The Model SR601 works as a
­traditional current transformer (with
a ratio of 1000:1) and provides current
outputs in mA/A for use on DMMs,
power and harmonic meters, data
­loggers, recorders or instruments with
current ranges.
Features
Applications
•Measurement range of
100mA to 1200Aac
• Power quality measuring
•Large jaw opening accommodates
conductors up to two 500MCM
­conductors
• Measuring around cable bundles
•Ergonomic design and easy
­operation
• Low industrial loads
• Power load monitoring
•Waveform analysis
•Conforms to EN 61010, 600V Cat. III
safety standard
•Low phase shift for power
­measurements
•Available with mA output signals
•Designed for DMMs, recorders,
­loggers, oscilloscopes, power and
harmonic meters
• U
L approved for Canada and
United States
• Double Insulation
•CE Mark
SR601_211343 (pdf) 0308 Rev. 05
Technical Assistance (800) 343-1391
www.aemc.com
1 of 4
Specifications
Model
SR601*
Electrical
Nominal Range
Measurement Range
Transformation Ratio
Output Signal
Accuracy (1000A Range)
0.1 to 10A
50A
200A
1000A
1200A
Phase Shift (1000A Range)
50A
200A
1000A
1200A
Overload
Frequency Range
Load Impedance
Working/Common
Mode Voltage
Output Termination
Mechanical
Operating Temperature
Storage Temperature
Operating Relative
Humidity
Jaw Opening
Maximum Conductor Size
Maximum Bus Bar Size
Dimensions
Weight
Polycarbonate Material
Safety
Electrical
UL Approval
Double Insulation
CE Mark
1000A
0.1 to 1200A
1000: 1
1mAac/Aac: (1Aac @ 1000A)
≤ 3% + 0.1A
1.5% of Reading
0.75% of Reading
0.5% of Reading
0.5% of Reading
1.5°
0.75°
0.5°
0.5°
1200A for 40 min ON, 20 min OFF
30Hz to 5kHz; current derating
above 1kHz using the formula:
1000A x 1/F (in kHz)
5Ω max
600V Cat. III
Jack
-14° to 122°F (-10° to 50°C)
-4° to 158°F (-20° to 70°C)
0 to 85% @ 35°C
2.25" (57mm) max
2.05" (52mm)
One 1.95 x 0.19" (50 x 5mm)
4.37 x 8.50 x 1.77" (111 x 216 x 45mm)
1.21 lbs (550g)
Handles: Polycarbonate + ABS, Gray, UL94 V0. Jaws: Polycarbonate, Red, UL94 V0
EN 61010-2-032
Yes – Canada and United States
Yes
Yes
Note: Reference conditions: 23 ± 3°K, 20 to 75% RH, 48 to 65Hz, external magnetic field < 40A/m, no DC component, no external ­current
carrying conductor, test sample centered. Load impedance 0.2Ω
*Diode Protection for open secondary (Output)
SR601_211343 (pdf) 0308 Rev. 05
Technical Assistance (800) 343-1391
www.aemc.com
2 of 4
4.37" (111mm)
3.98" (101mm)
2.25" (57mm)
1.22" (31mm)
Ø=2.05" (52mm)
Conductor size
max.
2.13"
(54.1mm)
8.50" (216mm)
1.38" (35mm)
1.71" (43.5mm)
1.77"
(45mm)
3.90" (99mm)
Jacks:
Two standard
safety banana
jacks (4mm)
ORDERING INFORMATION
CATALOG NO.
AC Current Probe Model SR601 (Jack – 1mA/A – 1000A max). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2113.43
Includes a user manual
Accessories (Optional)
Leads, set of two, 5 ft safety (1000V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2111.29
Banana plug adaptor (Safety Leads to nonrecessed plug) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #1017.45
Banana (Female) – BNC (Male) Adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2118.46
SR601_211343 (pdf) 0308 Rev. 05
Technical Assistance (800) 343-1391
www.aemc.com
3 of 4
Contact Us
United States & Canada:
Chauvin Arnoux®, Inc.
d.b.a. AEMC ® Instruments
200 Foxborough Blvd.
Foxborough, MA 02035 USA
(508) 698-2115 • Fax (508) 698-2118
www.aemc.com
Customer Support – for placing an order, obtaining price & delivery:
customerservice@aemc.com
Sales Department – for general sales information:
sales@aemc.com
Repair and Calibration Service – for information on repair & calibration, obtaining a user manual:
repair@aemc.com
Technical and Product Application Support – for technical and application support:
techinfo@aemc.com
Webmaster – for information regarding www.aemc.com:
webmaster@aemc.com
South America, Central America, Mexico, Caribbean, Australia & New Zealand:
Chauvin Arnoux®, Inc.
d.b.a. AEMC ® Instruments
15 Faraday Drive
Dover, NH 03820 USA
(978) 526-7667 • Fax (978) 526-7605
export@aemc.com
www.aemc.com
All other countries:
Chauvin Arnoux SCA
190, rue Championnet
75876 Paris Cedex 18, France
33 1 44 85 45 28 • Fax 33 1 46 27 73 89
info@chauvin-arnoux.com
www.chauvin-arnoux.com
SR601_211343 (pdf) 0308 Rev. 05
Technical Assistance (800) 343-1391
www.aemc.com
4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising