PTac caTalog

PTac caTalog
Packaged Terminal Air Conditioners and Heat Pumps
with our DigiSmart® Control Board & EMS
PTAC Catalog
• First-Year Warranty: Parts & Labor
• Second through Fifth Year: Parts & Labor on certain sealed
system components
• Second through Fifth Year: on certain functional parts only
* Complete warranty details available from your local dealer or at ­www.amana-ptac.com.
CT-DPTAC
www.amana-ptac.com
Amana® is a trademark of Maytag Corporation or its related companies and used under license to Goodman Company, L.P. All rights reserved.
10/12
Supersedes 6/12
Standard Features
• Energy Efficiencies: With EERs up to 11.7 and COPs up to 3.4, our unit’s high efficiencies may qualify you for many of the
rebates offered by electrical power companies.
• Quiet Operation: Our PTAC has been redesigned to be the quietest PTAC we’ve ever built. The unit’s state-of-the-art design
and construction provide a quiet environment, allowing guests to enjoy peaceful, sleep-filled nights.
• Two fan motors (indoor/outdoor)
• Indoor tangential fan for quiet operation
• STC of 28
• Assembled in the USA for 30 years: assembled at our plant in Fayetteville, TN, using Goodman resources including
engineering, production, and testing.
• Increased Dehumidification Capacity: Maintain lower humidity levels in rooms while cooling them without the need
for expensive add-ons. As a result, guests feel more comfortable at higher temperatures, thus reducing cooling costs.
• Seven-Button Touch Pad: Provides complete control to guests for in-room comfort while maintaining energy efficiency.
• Five-Year Limited Warranty: Enjoy one of the most comprehensive warranties in the industry: First Year: parts & labor;
second through fifth years: parts & labor on certain sealed system components; second through fifth years: on certain
functional parts only. For complete warranty details, visit www.amana-ptac.com.
• 100% Run-Tested: All units are 100% run tested at our plant in Fayetteville, TN, including leak checks during manufacturing
and again prior to shipment at the warehouse.
• 7⅝” Unit Front Depth: Enhance valuable room space with our slim unit front, which has a sleek 7⅝” depth, one of the
shallowest silhouettes in the industry today. In addition, to inhibit guest-tampering, the front can be secured to the chassis
with a hidden screw.
• Removable Condenser Shroud: Allows easy access to enable regular cleaning of coils, which is essential to maintain unit
efficiency and protect the compressor for long unit life.
• Easy Pull-Out Filters: Our filters are washable and easy to maintain.
• Filter Drier for Sealed System Refrigerant: Standard in all units to protect the compressor and lengthen the life of the unit
by removing moisture and preventing acid formation.
Control Board
Removable/Cleanable
Shroud for easy cleaning
Easy Pull-up Filters
Filter Drier
2
www.amana-ptac.com
CT-DPTAC
Standard Features (cont.)
• Condensate Dispersion System: Our condensate dispersion system removes condensate from indoor cooling operation
by throwing water directly on to the outdoor coil for rapid evaporation and increased cooling efficiencies. The slinger ring
on the new, enhanced fan draws water up and into the fan blades. This water is then atomized and evaporated into the
atmosphere through the condenser. Increased surface area from the coil allows more water to be evaporated on the sides
of the coils and helps to minimize condensate run-off.
• Front Desk Control: Each unit comes equipped with the DigiSmart™ control and energy management software. With DigiSmart™ using the optional RF Antennae, all units can be wirelessly connected to a central hub for enhanced energy savings
and diagnostics. Amana brand PTACs also have a low-voltage interface capability with a field-supplied front-desk ON/OFF
switch. (See Page 4.)
• Room Freeze Protection: When the unit senses temperatures of 40°F or below, the unit activates the fan motor and either
the electric resistance heater or the hydronic heater. • Easy-to-use Controls: No complex controls to confuse your guests and create phone calls for your manager. Controls are
easy to read, understand, and activate. Our new 7-button control panel provides guests with complete control of the unit
for their in-room comfort while maintaining overall energy efficiency.
• Easy to Service with On-Board LED Diagnostics: The main components are easily serviced and there is no guessing to determine the problem with our easy-to-read diagnostics.
• Stonewood Room Front: Our Stonewood room front strikes the balance between attractive styling and practical design.
Distinctive contours and a modern appearance enhance the character of even the most luxurious room, while the sleek 7⅝”
depth maximizes usable space for your guests.
• Remote Thermostat Control: When the DigiSmart™ wireless remote thermostat (DS01E, sold separately) is set up, both the
remote thermostat and unit control panel continue to control the unit, providing flexibility and home-like system control. Installation requires no more than pressing two buttons. No need to run wires or make electrical connections.
• Remote Temperature Sensing: Guests enjoy ultimate comfort with consistent climate control. When the field-installed
thermistor (RTS03) is used, the unit-mounted thermostat is overridden to allow more accurate, internal wall-sensing of
room ambient temperature.
• Extended Heat Pump Heating: Heat pump models will operate in the heating mode down to as low as 24°F outdoor ambient temperature.
• Zero Floor Clearance: The unit can be installed flush to a finished floor, if desired. (Some accessories do not have zero clearance).
• 30-Second Fan-Off Delay: The fan continues to run 30 seconds after the compressor has stopped in either cooling or heat
pump mode and after electric heat has been turned off. This improves efficiency by dispersing the conditioned air on the
coils into the room.
• Compressor Lock-In: This feature helps prolong the life of the compressor by preventing short-cycling. When the compressor is switched from Off to On because room temperature has risen or fallen below the specified limit, it will remain on for
at least 4 minutes. If the temperature set-point is changed during this 4 minutes, the lock-in feature is overridden.
• Automatic Emergency Heat: No more “my unit is not heating” complaints during the middle of the night. Heat pump units
will automatically switch over to electric resistance heat if the heat pump compressor system fails or if the heating load is
greater than the unit capacity.
• Constant Fan Mode: Take advantage of each unit’s dual options — select continuous fan operation or cycle the fan ON and
OFF with the thermostat. Our new 7-button design allows guests to select fan performance while allowing the owner to
have the unit revert to the desired program of continuous fan or cycle with conditioning.
• Hidden Ventilation Control: The ventilation control lever is hidden from the occupant's view to allow you to manage ventilation requirements.
• High-Pressure Switch: Protects the unit from high pressure and damage to the unit, helping to ensure long unit life.
CT-DPTAC
www.amana-ptac.com
3
brings together our best PTAC ever with our best Energy Management Software and now integration with
Property Management and Front Desk Management Software. Reduce PTAC energy consumption by 35% OR MORE* through
the power of the in-unit Energy Management System, programmable temperature set-back and limits combined. Reduce PTAC
maintenance cost through our automated maintenance notification system. Improved maintenance sustains energy efficiency
(EER) and prolongs PTAC life, keeping equipment running at its designed efficiency level and room guests more comfortable.
The Amana Brand DigiSmart Solution
In-Room: “Self-Installable” Wireless Peripherals
The DigiSmart Occupancy Sensor completes the in-room equipment. This infrared
sensor can determine if the room is occupied or empty, and when empty signals the
PTAC to adjust the temperature to save energy based on programmable setbacks.
The DigiSmart Wireless Remote Thermostat can mount on the wall anywhere in
the guest room. Battery powered and with its own wireless ability to communicate
with the PTAC to maintain room temperature. Best of all, no wires to run. The PTAC
and Thermostat connect at the press of a button and are permanently linked. The
thermostat and PTAC work in-sync to display accurate temperature.
The DigiSmart Wireless Antenna installs inside the PTAC with a snap-in connector. Installing the antenna allows the PTAC to
communicate wirelessly with other devices in the room and to the DigiSmart network.
> 45,000+ rooms have had wireless installations since 2005
> Total wireless devices deployed to date: 120,000+
The Amana brand DigiSmart PTAC with antenna, combined with the self-installable, wireless Thermostat and Occupancy
Sensor give the property owner complete control over the equipment settings and can reduce PTAC energy usage by 35% OR
MORE.*
Site-Level —
Central Wireless Controller
> Site-wide PTAC Configuration
> Site-wide PTAC Diagnostics
> Front Desk System Interface
> Email Reporting
> Internet Accessible Web User Interface Enterprise
* These savings represent estimated savings over time as compared to the same PTAC model without the DigiSmart EMS System installed and were
generated using general assumptions including energy loads, local weather averages and use of occupancy controls. Actual savings will vary according to
actual use habits, room square footage, and how the unit is installed.
4
www.amana-ptac.com
CT-DPTAC
Enterprise — Multiple Wireless Controllers
Central Monitoring and
Control of Multiple Properties
> Data Warehousing
> Savings Analysis
> Email Reporting
> Virtual Metering
> Load Shedding
Web-Based, Real-Time Monitoring
Amana® Brand DigiSmart™ Controller:
All of the PTACs in the building can be managed through a single interface on a PC.
FEATURES INCLUDE: Full unit details for every PTAC, visible from the front desk or home office, automatic emails for PTAC
maintenance, ability to change all settings on the unit, and enhanced diagnostics. Monitor up to 170 PTACs, WIRELESSLY, with
one controller. Additional controllers can expand the network for additional rooms/properties.
> System Verification
> Global Setbacks
> EMS Configuration
> Site Statistics
> Battery Notices
> Email Reporting
> Unit Health
> Unit Code Alerts
Temp Limiting – Each PTAC
can be configured with a heating and cooling temperature
set-point limit.
Setbacks – Once a room is
declared unoccupied by the occupancy sensor, the PTAC progresses through three different temperature setbacks, configured
as three degree and time pairs (An example configuration is listed below).
1st: 2°, 30 mins – Setback the temp 2 degrees after 30 minutes
2nd: 4°, 1 hr – Setback the temp 2 more degrees after 30 more minutes
3rd: 8°, 3 hrs – Setback the temp 4 more degrees after 2 more hours
Unrented Set-Points – By integrating with your property's Front Desk System, the PTACs will adjust to specific set-points when
no longer identified as rented in the system.
CT-DPTAC
www.amana-ptac.com
5
Accessories
Standard Depth Sleeves
WS900E
Standard PTAC sleeve
WS900SC
Seacoast triple protected
WS900DINTERNAL
Internal drain only for
window-wall installations
(DK900D sold separately)
161/16"
Wall Sleeves
All our wall sleeves have industry standard dimensions of 42” wide x
16⅟₁₆” high. All Stonewood Beige G-90 metal wall sleeves are thermally
insulated and include a weather board for use during construction.
The WS900D, SC and INTERNAL 14⅛” depth is the industry standard. Sleeves may be shipped separately to allow for installation during
construction.
"
42"
14⅛
Extra Deep Sleeves
We offer sleeves in several depths for thicker
wall installations or special room configurations
Outdoor Grilles
Available in stamped-aluminum or architecturally louvered for
application with an Amana brand WS900D wall sleeve.
AGK—Extruded aluminum architectural grille available with anodized aluminum finish or a baked-on paint finish for durability.
Choose from 3 stock colors or a custom color to blend with
your building’s exterior color scheme. Colors include:
CB (Clear Anodized), DB (Dark Brown/Bronze)
TB (Stonewood Beige), WB (White),
SB (Special/Custom Colors)
PGK—One-piece injection molded grille using a polymer blend of
engineered thermoplastic high-impact strength material with
chemical resistance and an exterior UV protective coating.
Choose from 3 stock colors:
DB (Dark Brown/Bronze), TB (Stonewood Beige), WB (White)
Condensate Drain Kit
Attaches to the wall sleeve base pan for controlled internal or external
disposal of condensate.
Low-Voltage Wire Harness Kit (not shown)
For quick connections of the remote, or wired, thermostats, wired
EMS, or front desk with jumpers and connectors.
Remote Escutcheon Kit (not shown)
Optional kit for use with units controlled via a wired, remote
thermostat. Covers control touch-pad for wired thermostat
installations.
Sub-base Kit
The fully skirted sub-base conceals wiring while providing strong
support, if needed. Plug-in receptacle and field-wiring access speeds
installation. Electrical accessories, such as fuse holders, circuit
breakers and disconnect switches, meet N.E.C. requirements.
WS9xxD1
16” to 24” in 1”
increments
WS928D1
Extra deep 28”
WS930D1
Extra deep 30”
WS936D1
Extra deep 36”
Standard Outdoor Grille
SGK01B
SGK01TB
Single Pack
Stonewood Beige
SGK
Architectural Outdoor Grille
AGK01CB
AGK01DB
AGK01TB
AGK01WB
AGK01SB
PGK01DB
PGK01TB
PGK01TB
DK900D
DK9001D
PWHK01C
REK10B
PTSB320E
PTSB330E
PTSB420E
PTSB430E
PTSB000E
Anodized Aluminum (Silver)
Dark Bronze/Brown
Stonewood Beige
Amana White
Custom Colors
Dark Bronze/Brown
Stonewood Beige
Amana White
AGK
or
PGK
Condensate Drain Kit
(use with WS900E)
Condensate Drain Kit (use with WS900B)
DK900D
Wire Harness Kit
Remote Escutcheon Kit
(10-pack)
Each kit contains 80 wires and wire nuts, enough to attach a
thermostat and one additional accessory to 10 PTAC units.
Wires come in assorted colors for easy attachment.
Optional
Fuse Holder
Location
230/208V 15/20A
230/208V 30A
265V 15/20A
265V 25A
Non-electrical
Optional
Power Switch and Circuit Breaker
Location
Power Receptacle
Skirting
Skirting
Leveling Legs
Leveling Legs
Gives wall sleeve front support and helps to level the unit for
installation.
6
LL2B
Subbase Box Assembly
Leveling legs for WS9** sleeves
www.amana-ptac.com
CT-DPTAC
Accessories (cont.)
Hard-wire Kits
Used to permanently wire to the chassis when a standard sub-base
and power cord are not utilized.
Power Disconnect Switch
The PSHW**A power disconnect switch can be used for 265-volt or
230/208-volt physical disconnect, where required by local codes.
The switch is rated at 30-amp capacity. The switch is for use with and
Amana® brand standard sub-bases or PTPWHWK4 Hard Wire Kit.
Fuse Holder Kit
Cartridge-style fuses can be installed in the fuse holder for use in the
sub-base or chassis. Available in 15, 20 and 30 amp (included on 265volt unit).
Circuit Breaker Kit (230/208V only)
The circuit breaker kit, available in 15, 20 or 30 amp, can be used
with Amana brand sub-bases. It gives overcurrent protection, and its
location allows you to turn the unit on or off without tools.
PTPWHWK4
Armored Cable all voltages
PTQC03A
Quick Connect 230/208V
PTQC04A
Quick Connect - 265 & 115 V
PSHW03A
230/208V
PSHW04A
265V
FHK315C
230/208V 15A
FHK315E
230/208V 15A (R-410A)
FHK320C
230/208V 20A
FHK320E
230/208V 20A (R-410A)
FHK330C
230/208V 30A
FHK330E
230/208V 30A (R-410A)
CBK3**C
Duct Extension Kit
Extends air distribution to an adjoining room. Consists of a main duct for
the room of origin and an extension duct to reach the adjoining room
and terminal duct. PTDK01A allows for the new “B” series unit to work
with the “A” series duct kits.
Circuit Breaker Kit
Main Duct Kit
TRANSITION
MDK02B
Main Duct – R-22
MDK01E
Main Duct – R-410A
EDK02B
Extension Duct
Power Vent Kit
Installation of Power Vent increases CFM up to approximately 95. Vent
door will automatically close when unit fan is off.
Extension Duct Kit
BAFFLES
Terminal Duct Kit
TDK02B
Terminal Duct
PTDK01A
Transition Duct Only – R-22
PTDK01E
Transition Duct Only – R-410A
PVK3A
230/208V – R-22
PVK4A
265V – R-22
R-410A models must have these kits installed at the factory.
Condenser Baffle Kit
For use on non-baffled­ grilles. These deflectors direct the air in toward
the center and away from the inlet to prevent recirculation of the hot
condenser air.
DGK1B
Condenser Baffle Kit
Condenser Baffles
Condenser
Basepan
CT-DPTAC
www.amana-ptac.com
7
Accessories (cont.)
Sub-base Extension Cover Kit
Converts older 30-amp sub-bases to allow for installation of the larger
30-amp LCDI power cord and plugs.
Condensate Removal Pump
Can be field-installed. Assists in removing condensate developed by
heat pump operation and transfers it to indoor coil to dissipate into
room while adding humidity to the room.
Security Key Locks
In conjunction with the tamper-resistant front, the installation of
Amana® brand security key locks prevents tampering of the controls
used to set temperature, heating and cooling functions. UL approved
for institutional use only.
SBEC10A
10 Pack
CDP302
230/208V – R-22
CDP402
265V – R-22
CDP302E
230/208V – R-410A
KL03B
Security Key Lock (R-22)
KL03E
Security Key Lock (R-410A)
Thermostats
The following thermostats offer remote control. Any thermostat other than those listed must be submitted to Goodman Company, L.P., for approval prior to use.
Heat
Stages
Cool
Stages
Fan
Speed
2246002
1
1
1
5
2246003
2
2
2
2246007
2
2
2246008
2
DS01E
2
Model #
Backlit
Display
Type
Shape &
Orientation
Connection
No
Yes
Digital
Manual
Rect./Horiz.
Wired
7
Yes
Yes
Digital
Manual
Rect./Horiz.
Wired
2
7
Yes
Yes
Digital
Auto-Change
Rect./Horiz.
Wired
2
2
7
Yes
Yes
Digital
Programmable
Rect./Horiz.
Wired
2
2
0
Yes
Yes
Digital
Manual
Rect./Horiz.
Wireless
Hydronic Heat Kit
Add-on kits fit all units allowing the addition of hydronic water or
hydronic steam heat to cooling and heating units. The kits feature
left- or right-hand piping. Unit retains complete service access with
a kit installed. Unit must be connected to and operated by a wall
thermostat.
Temp
# of Wires
Required Limiting
Hydronic Heat Kit-Top View
Hydronic Heat Kit-Side View
Hydronic Heat Kit-Right View
8
HWK03B
Hydronic Water Kit – R-22
HVK03B
Hydronic Steam Kit – R-22
HWK03E
Hydronic Water Kit – R-410A
HVK03E
Hydronic Steam Kit – R-410A
www.amana-ptac.com
CT-DPTAC
Accessories (cont.)
Power Door Kit
Vent door will automatically open when unit fan is on.
Hydronic Valves
Water and steam valves are available for use with the HWK03 (water)
and HVK03 (steam) heat kits.
PDK3A
230/208V – R-22
PDK4A
265V – R-22
PDK3E
230/208V – R-410A
PDK4E
265V – R-410A
VS2WNCA*
2-way/24V/NC/Steam
VS2WNOA*
2-way/24V/NO/Steam
VW2WNCA*
2-way/24V/NC/End Switch
VW2WNOA*
2-way/24V/NO/End Switch
VW3WNC2B*
3-way/24V/NC/NO/End Switch
* Poptop Actuator
Wireless RF (Radio Frequency) Controls
All DigiSmart PTACs come factory-ready to be controlled via wireless
RF devices. 2.4 Ghz 802 15.4 protocol assures robust communications
and response.
DS01E
Thermostat: 2-way communications
DD01E
Occupancy Sensor: EMS activation
DT01A
Antennae / Router
GT01A
Generic Radio Antenna / Router
DD01F
Door Switch: EMS Activation
DP01E
Web-enabled Platform Server
DL01E
Web-enabled Platform Server Link
Remote Temperature Sensor
Unit can be wired to sense room temperature away from the PTAC to
have accurate readings.
RTS03
Wired Energy Management Control
Includes PIR occupancy sensor power from the DigiSmart control and
door switch; cannot be used with a remote wired thermostat.
WEMR01W
WEMS01B
WEMS01W
Wall Sleeve Extension Adapter Kits
Room-side extension kits to increase the depth of the existing sleeve
to allow for an industry-standard PTAC to be installed.
SECM1001A
SEZA0501A
Curtain Baffle Kit
The color matched polymer curtain baffles help to prevent curtains
from falling into the discharge air stream and causing recirculation,
reducing efficiencies and shortening compressor life.
CT-DPTAC
Remote wall-mounted sensor
Recess-mounted door switch
Surface-mounted door switch (Brown)
Surface-mounted door switch (White)
Climate Master 12½” Sleeve Extension (10 Pack)
Zone Aire 11½” Sleeve Extension (5 Pack)
PTCB10B
10 Pack for R-22 units
PTCB10E
10 Pack for R-410A units
www.amana-ptac.com
9
Monthly Maintenance
Intake Air Filters
It is extremely important to clean the inlet air filters once a month (or more often if operated in dusty or dirty locations or
conditions) to properly maintain the operational performance of the PTAC unit. The two intake air filters (constructed of
durable polypropylene) can be easily inserted into the cabinet front using the cabinet filter guides. Before cleaning the intake
filters, turn the unit off by setting the mode switch to the OFF position. Filters should be cleaned as required.The following
procedure is used to remove the intake filters:
1. Facing the unit, pull up on the filter handles located at the front top of the unit.
2. Pull each filter upward and remove.
3. Clean filters with vacuum or with running water. Reverse this procedure to reinstall the filters.
Note: Accessory filter kits are available from your sales person. All filters are permanent and cleanable. Consult your I&O Manual for other monthly cleaning instructions.
Spare Filters
Helps keep dirt and lint out of the air and off the coil,
thus increasing the unit's efficiency. Amana® brand
filters are easy to remove, wash and replace.
FK10A
10-pack - A Series
FK10B
10-pack - B, C & D Series
FK10E
10-pack - E Series (This
model requires 2 filters
per change.)
Replacement Charcoal Filter Kit
Absorbs airborne odors caused by cigarette, pipe
or cigar smoke and odors caused by mold, mildew,
etc. Filters are made of polyester fibers coated with
activated charcoal and are individually wrapped.
These filters are permanent and can be washed or
cleaned. Call your Amana® brand PTAC sales person
for details. 10 filters per pack.
CFK10A
10-pack - A Series (R-22)
CFK10B
10-pack - B, C & D Series
(R-22)
Power Cord Configuration
Power Cord Plugs
Power Receptacle Configuration
250V Rating Power Cord Plugs with LCDI Device
NEMA 6 Configuration
15 amp
20 amp
30 amp
NEMA6-15R; 250V
receptacle used on
230/208V units
NEMA6-20R; 250V
receptacle used on
230/208V units
NEMA6-30R; 250V
receptacle used on
230/208V units
20 amp
10
G
NEMA7-20R; 277V receptacle used on 265V units
W
W
G
277V Rating Power Cord Plugs
NEMA 7 Configuration
30 amp
www.amana-ptac.com
NEMA7-30R; 277V receptacle used on 265V units
All units come with factory-installed power cords.
All units less than 250 volts come with LCDI device.
CT-DPTAC
Notes
CT-DPTAC
www.amana-ptac.com
11
Packaged Terminal Air Conditioners
and Heat Pumps
with
Control Board
7-Button Control Pad
• One-Touch Activation
• Total Fan Control
• Easy-to-Read Display
First-Year Warranty: Parts & Labor
Second through Fifth Year: Parts & Labor on certain sealed system components
Second through Fifth Year: on certain functional parts only
* Complete warranty details available at ­www.amana-ptac.com.
Amana® is a trademark of Maytag Corporation or its related companies and used under license to Goodman Company, L.P. All rights reserved. Our continuing commitment to quality products may mean a change in specifications without notice. © 2012 • Goodman Company, L.P. • Houston, Texas • Printed in the USA.
12
www.amana-ptac.com
CT-DPTAC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising