Daviscomms Bravo 802 Alphanumeric Pager Programming Manual

Daviscomms Bravo 802 Alphanumeric Pager Programming Manual
Programmer Manual Rev 01
Programmer
Manual
Approved By:
SK Chong
Executive Director
Daviscomms (S) Pte Ltd
Date: 26-Jul-2006
500142R01
Daviscomms Confidential
1 / 10
Programmer Manual Rev 01
Revision History
Rev
Date
01 25-Jul-06
Originator
Hui Juan
500142R01
Daviscomms Confidential
Description
Initial release
2 / 10
Programmer Manual Rev 01
Contents
Contents ..........................................................................................................3
1. Programmer Setup.......................................................................................4
1.1 Programming Steps................................................................................4
1.2 PPS Programming Setup Block Diagram ...............................................4
1.3 Programmer & Accessories Part List......................................................4
1.4 PPS Verification .....................................................................................6
2. TMR Test Kit Setup......................................................................................9
2.1 Programming Steps................................................................................9
2.2 TMR Test Kit Setup Diagram..................................................................9
2.3 TMR Test Kit Part List .......................................................................... 10
500142R01
Daviscomms Confidential
3 / 10
Programmer Manual Rev 01
1. Programmer Setup
1.1 Programming Steps
Step 1: Install PPS Programming software.
(Please refer to Section 1.4 PPS verification for first-time users)
Step 2: Set up Programmer Kit as shown in the PPS Programming Setup Block Diagram.
Step 3: Connect the USB/Parallel Port Cable to PC.
Step 4: Probe the pager with probe catch (See Item 5 of Section 1.3) facing inward
(with the exception of Br502 Pager).
or
Place the pager in the cradle (without battery door).
1.2 PPS Programming Setup Block Diagram
Option 1
PPS
(PC)
Power
Supply
Parallel
Cable
USB
Cable
Option 2
Parallel
Programmer
Box
Cradle Kit
Pager
USB
Programmer
Box
Serial Interface
1.3 Programmer & Accessories Part List
Item
1
2
3
4
5
6
Part Number
400312R01
400200R01
400201R01
AA339800-F
JAS03-112-F
400087R01
400057R01
4PPAK01
PI-41-798EU-F
400238R01
OH1048A090100UF
500142R01
Daviscomms Confidential
Description
USB PPS PROGRAMMER BOARD KIT
PARALLEL PROGRAMMER BD
PROGRAMMER HOUSING
D-25/USC-A-SP CABLE (for USB PPS only)
DATA CABLE 1.8M WITH DB (for Parallel Programmer only)
B502 CRADLE KIT (for Br502 only)
B800 PROGRAMMING CRADLE KIT (for Bravo 800/Br802 only)
PARALLEL CABLE ONLY (for all models)
POWER SUPPLY – CE
SWITCHING POWER SUPPLY - ROUND
SWITCHING POWER SUPPLY – FLAT
(for Parallel Programmer only)
4 / 10
Programmer Manual Rev 01
Item 1 & 2: Programmer Box (PB)
Item 3:
PC-PB
Cable
Item 6:
DC Power
Supply
Item 4 or 5:
Cradle Kit or
Serial
Interface
USB PB (Blue LED)
Parallel PB (Yellow LED)
Item 3: PC-PB Cable
USB Connector (USB Port of PC) to
DB-25 pins Parallel Connector (USB PB)
DB-25 pins Parallel Connector
(One end to Parallel Port of PC,
the other end to Parallel PB)
Item 4: Cradle Kit
RJ11 connector to
Programmer Box
Bravo 800/Br802 Cradle Kit
500142R01
Daviscomms Confidential
Br502 Cradle Kit
5 / 10
Programmer Manual Rev 01
Item 5: Serial Interface
To PB
Probe catch
1.4 PPS Verification
1. For the very first time when the PB firmware is running, the Windows will prompt you
for its driver. Skip step 2-6 if the driver has been installed.
2. Depending on the platform, the Windows might ask if it can connect to Windows
Update. Choose No, not this time.
500142R01
Daviscomms Confidential
6 / 10
Programmer Manual Rev 01
3. Select “Install from a list or specific location (Advance)” and click Next.
4. Check the box “Include this location in the search” and browse to the PPS Driver
folder and click Next.
500142R01
Daviscomms Confidential
7 / 10
Programmer Manual Rev 01
5. A Windows will popup saying the software has not passed Windows Logo testing.
Click Continue Anyway.
6. The installation is finish by clicking the Finish button.
7. Launch the PPS and verify that erase/write/read operation via Parallel/COM interface
is successful.
500142R01
Daviscomms Confidential
8 / 10
Programmer Manual Rev 01
2. TMR Test Kit Setup
2.1 Programming Steps
Step 1: Install PPS Programming software.
(Please refer to Section 1.4 PPS verification for first-time users)
Step 2: Plug the TMR module 20-pin connector into the Test Board 20 pins connector
Step 3: Connect RJ45 connector to the RJ45 Jack on the Test Board.
Connect DB25-pin connector of the programming cable to Parallel Port on PC.
(This connection need only be made if the TMR will be re-programmed with a new
frequency or capcode.)
Step 4: Connect the male portion of the DB9-pins serial cable to connector on the Test Board.
Connect female portion of the DB9-pins serial cable to the Serial Ports (COM ports)
on PC.
Step 5: Connect power connector (12Vdc adapter) into power jack on the Test Board.
Step 6: The power LED will light on the Test Board and on the TMR module.
2.2 TMR Test Kit Setup Diagram
500142R01
Daviscomms Confidential
9 / 10
Programmer Manual Rev 01
2.3 TMR Test Kit Part List
Item
1
2
3
4
Part Number
400195R01
PI-41-798EU-F
400238R01
OH1048A090100UF
Description
TMR TEST BOARD KIT
POWER SUPPLY – CE
SWITCHING POWER SUPPLY - ROUND
SWITCHING POWER SUPPLY – FLAT
JAS04-014A
JAS04-013A
Serial Cable (DB9 Male to DB9 Female)
Programming Cable (DB25 Female to RJ45 8 pin)
500142R01
Daviscomms Confidential
10 / 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising