Specification Sheet

Specification Sheet
S p e c ­i ­f i ­c a ­t i o n s
DESCRIPTION
•
•
•
•
•
Various finishes identified by suffix
Handheld shower
69" double interlock spiral hose (metal)
Double check valves in handshower
30" slide bar with push button height selection
OPERATION
•
•
4-function: massage, vigorous, full and combination: rotate
outer ring to select
Handshower holder rotates to adjust angle of hand shower
FLOW
•
EP suffix models are limited to 2.0 gpm (7.6 L/min) at 80 psi
STANDARDS
•
•
Designed and manufactured to comply with the applicable
requirements of ASME A112.18.1/CSA B-125.1 and ASSE 1014
and all applicable specifications referenced therein
EP suffix models are third party certified to WaterSense®
WARRANTY
•
Lifetime limited warranty against material or manufacturing defects
4-Function Massaging Handshower
w/Slide Bar
Models: 3667EP series
1-1/2” max
wall thickness
4-3/8" (111mm)
SPRAY HEAD
DIAMETER
FINISHED
WALL LINE
EP suffix models only
Drop ell sold
separately
30-5/8"
(778mm)
9-11/16" (246mm)
SPRAY WAND
HEIGHT
Hole Size
5/8" (17mm)
1-1/2" (39mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
4/13
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
DESCRIPTION
•
•
•
•
Metallic spray face and shell
Brass swivel ball assembly
1/2” IPS connection
Available in various finishes identified by suffix
OPERATION
•
Single spray function
FLOW
•
Designed to deliver 1.75 gpm max (6.6 L/min) at 80 psi
STANDARDS
•
Third party certified to ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
Small Single Function Body Spray
WARRANTY
•
Warranted for one year against material or manufacturing defects
Models: A501 series
A501 Series
21˚
2-1/2“
(63mm)
2“
(51mm)
2-1/2“
(63mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 5/11
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c ­i ­f i ­c a t­ i o n s
DESCRIPTION
• Metal construction with various finishes identified by suffix
WARRANTY
• Warranted for one year against material
or manufacturing defects
DROP ELL
Models: A725 series
3/8" (10mm)
Extended Pipe
1/2-14 NPT
Pipe (Not Included)
1.85"
(47mm)
2.125"
(54mm)
1" (25mm) Minimum
Diameter Hole
1/2-14
NPSL THREAD
Finished
Wall Surface
BACK VIEW
SIDE VIEW
BEFORE 6/1/2011
Finished
Wall Surface
1/2-14 NPT
2" (51mm)
Pipe (Not Included)
2-3/8"
(60mm)
1" (25mm) Minimum
Diameter Hole
1/2-14
NPSL THREAD
3/8" (10mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 9/11
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c ­i ­f i ­c a ­t i o n s
DESCRIPTION
•
Metal construction with various finishes identified by suffix
WARRANTY
•
•
Lifetime limited warranty against finish defects to the original
consumer purchaser
5 year warranty if used in commercial installations
Shower Arm and Flange
Models: S122 series
Finished
Wall Line
2-1/2"
(64mm)
7.480-7.520"
(190-191mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
11/13
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
DESCRIPTION
•
Digital thermostatic valve design with 3/4” inlet push fit connections and
1/2” outlet push fit connections
OPERATION
•
•
•
•
Temperature range adjustment from 60 degrees F to 120 degrees F (16 degrees C to 49
degrees C). Factory maximum setting is 115 degrees (46 degrees C)
Must be used with TS3420 or TS295 series
Valve must be installed in an area that has an access panel
Electrical power supply requirements 240V/ 50-60Hz or
120V/ 60Hz
FLOW
•
•
Designed to deliver 17.5gpm (66 L/min) at 45 psi unrestricted flow. Min flow 2.4 gpm (9.1 L/min)
Designed to deliver 6.0 gpm (22.7 L/min) at 45 psi (one outlet)
STANDARDS
•
•
•
Third party certified to meet ASME A112.18.1/CSA B-125.1, CSA B125.3,
ASSE 1016, ASSE 1070 and all applicable requirements referenced therein
Third party certified to meet UL1951
Third party certified to meet FCC part 15
WARRANTY
•
•
Lifetime 5 year warranty against leaks, drips and operation defects to the
original consumer purchaser
1 year warranty if used in commercial installations
ioDIGITAL™ Thermostatic Shower
Valve
Model: S3384
(one outlet)
STANDARD 16"
ON CENTER STUD SPACING
13-3/4" MIN
(349mm)
STUD
13-1/2"
( 342mm )
3-11/32"
( 85mm )
Valve Mounting Orientations
2x4"
PUSH FIT CONNECTORS
TO BE USED WITH
COPPER, PEX, OR CPVC
29-5/8"
( 752mm )
23-1/8"±1/4"
( 587±6mm )
POWER CABLE ( 6' ) ( 2 m )
2x4"
HOT
COLD
◊ Caution: Risk of Product Damage
DATA CABLE ( 30' ) ( 9.2 m )
CRITICAL DIMENSIONS
(DO NOT SCALE)
5/11
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
FAUCET DESCRIPTION
•
•
Metal construction with various finishes identified by suffix
Immersion™ Rainshower Technology channels water through a
spoke design – concentrating and magnifying the natural force
of your water to dramatically enhance your shower experience.
OPERATION
•
Single function
FLOW
•
•
Showerhead limited to 2.5 gpm (9.5 L/min) at 80 psi
EP suffix models are limited to 2.0 gpm (7.76 L/min) at 80 psi
STANDARDS
•
•
Third party certified to meet ASME A112.18.1/ CSA B125.1 and
all applicable requirements referenced therein
EP suffix models are IAPMO Green listed and third party certified
to WaterSense®
Single Function Rainfall Showerhead
with Immersion™ Rainshower
Technology
WARRANTY
•
•
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
Models: S6310 series
7”
(177mm)
Models: S6310EP series
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 2/11
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Specifications
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes four single-function body sprays
• Includes 7" rainshower showerhead, arm and flange
• Includes four function hand shower with 69” hose assembly, drop ell and slide bar
• Includes digital controller for temperature, flow, & spray outlet on/off control
OPERATION
• Digital Thermostatic control
• Digital control dial controls temperature with LED indicators & numeric readout on LCD screen
™
• Digital control dial controls the flow rate with LED indicators
• Digital on/off button
3/4” Vertical Spa
• Digital pause button
• Digital spray outlet on/off control with graphics on LCD screen
Models: TS295 series, TS3420 series
• 4 digital presents for temperature, flow rate, and spray outlet on/off selections
• Temperature range adjustment from 60 degrees F to 120 degrees F (16 degrees C to 49 degrees Optional Remote: SA340 series
C). Factory maximum setting is 115 degrees (46 degrees C)
(Sold separately)
FLOW
Valve: S3384 (Sold separately)
• Showerhead and handshower limited to 2.5 gpm (9.5 L/min)
• Bodysprays limited to 1.75 gpm (6.6 L/min) each
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1 and
all applicable requirements referenced therein including ASSE 1016
• Digital controller third party certified to meet UL1951
• Digital controller and Remote control third party certified to meet FCC part 15
WARRANTY
• Lifetime limited warranty against finish defects to the original consumer
purchaser
• 5 year warranty against leaks, drips and operation defects
to the original consumer purchaser
• 5 year warranty against finish defects if used in commercial installations
• 1 year warranty against leaks, drips and operation defects if used in
commercial installations
ioDIGITAL
FINISHED WALL LINE
7”
(177mm)
2“
( 51mm )
2-1/2“
( 63mm )
2-3/4"
( 70mm )
8-1/8"
( 206mm )
1-1/2"
( 38mm )
1-13/16"
( 46mm )
15/16"
( 24mm )
4-3/8"
( 111mm )
DATA CABLE ( 30' ) ( 9.2m )
CRITICAL DIMENSIONS
(DO NOT SCALE)
2/11
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising