in this guide you will learn how to connect to the nbn in no time

in this guide you will learn how to connect to the nbn in no time
IN THIS
GUIDE YOU
WILL LEARN
HOW TO
CONNECT TO
THE NBN
IN NO TIME
THE INCREDIBLY EASY GUIDE TO
INSTALLING YOUR NBN WiFi MODEM
PHONE
NBN WIFI MODEM
Heads-up: This modem will replace
your existing modem (if you have one).
YOUR OPTUS WELCOME LETTER
WIFI INFORMATION CARD
DON’T JUMP THE GUN!
YOU NEED TO READ THIS BEFORE STARTING YOUR INSTALL.
HAS NBN FINISHED THE JOB?
In most cases, NBN will activate your Connection Box during installation.
However, sometimes it takes a little longer, so it’s a good idea to ask
your NBN technician to confirm the status before they leave.
T
WIFI NETWORK NAME
DSL
p://10.1.1.1/
1
2
RESET
ETH1
ETH2
ETH3
ETH4
PWR
PASSWORD
If you attempt your Self Install before the Connection Box is active,
the lights on your Optus WiFi Modem won’t flash (as described in
Step 1, Part 4). If this is the case, just leave your modem connected.
Once the Connection Box is activated, your modem will complete
Step 1 automatically. When the modem lights have come on you
can march on to Step 2.
WiFi
USERNAME
PASSWORD
POWER ADAPTER
INSTALLATION GUIDE
(The thing you’re reading)
If your NBN Connection Box has been inactive for more than three
hours, give us a call on 1300 300 427 to check the status.
PHONE
TRANSFERRING PHONE NUMBERS
If you are transferring your phone number to Optus from another
carrier, it may take a day or two to complete if you started your
self install outside the standard hours of 8.30am–4.45pm,
Monday to Friday AEST.
ADSL
LINE
(You’ll only need the yellow one if you want to hook
up your computer directly)
PHONE CABLE
(Again, only if you’re
connecting your home1 phone)
2
DSL
RESET
You will be able to make calls once your modem is activated,
however, you won’t be able to receive calls to this number until
the transfer is complete.
ADSL2+ LINE FILTER
(AKA bit you won’t need if
you have access to the NBN)
ETH1
ETH2
ETH3
ETH4
PWR
So to avoid any interruption, we recommend you stick to stardard hours.
Otherwise, we’ll flick you an SMS to let you know when it’s back on deck.
ADSL
PHONE
ETHERNET CABLE 2
LINE
H1
ON YOUR MARKS,
GET SET...
ADSL
LINE
MAKE SURE YOU HAVE THESE
BITS AND BOBS HANDY
ETH2
ETH3
ETH4
PWR
IMPORTANT INFORMATION FOR NBN CUSTOMERS: Equipment supplied requires mains power which may not
be suitable if you have a serious illness or condition, require disability services, have a back to base alarm,
or require an uninterrupted telephone line, in which case, please give us a shout to discuss other options.
...GO!
STEP 1
PLUG IN YOUR MODEM
1
STEP 2
2
You’ll need access to the NBN Connection
Box and your Optus Welcome Letter (it tells
you which ports on the NBN Connection
Box to use) to complete this step.
Time for some colour matching. Grab the
Ethernet cable with red connectors and
plug one end into the red port on your
modem – it’s the one that says ‘Fibre’.
To remove the cover from your NBN
Connection Box, press the two clips
at the base upward. Pull the base of the
cover out (away from the wall), then up,
and remove it completely.
Plug the other end of the Ethernet cable
with red connectors into the Uni-D Port
on the underside of the NBN Connection
Box (your Welcome Letter tells you which
one it is). If you don’t have your letter
handy, try the first available port.
Figure 1.
Removing the cover
Figure 2.
Finding the ports
VOICE (UNI-V) PORTS
1
VOICE (UNI-V) PORTS
DATA (UNI-D) PORTS
2
3
4
POWER
RESET
1
2
3
1
If you already have a home phone, unplug
it from the existing wall socket and into the
back of your modem (you won’t need to
use the wall socket any more).
2
If your phone’s cordless, plug it
into a power point and turn it on.
If you don’t, you can use the cable we’ve
provided to connect it.
3
Let’s test it out. Pick up the handset – got dial tone? If you do, you’re all set up!
If you don’t, check that the phone light is on and not blinking. If it’s not, wait a few
minutes and try again. If after 15 minutes the light isn’t on and you still can’t get a dial
tone, something’s not quite right. Give us a call from your mobile on 1300 300 427.
FIBRE OPTIC
Plug the Power Adapter into a power
point and the other end into your modem.
Switch both on.
2
1
IF YOU DON’T HAVE A HOME PHONE, SKIP TO STEP 3 ON THE NEXT PAGE.
4
1. Push up
1
RESET
FIBRE OPTIC
This is what the underside of the NBN Connection Box
looks like. Plug the cable into the port that your Welcome
Letter directs you to.
2. P
ull up
and out
3
2
DATA (UNI-D) PORTS
PLUG IN YOUR PHONE
(IF YOU HAVE ONE)
4
POWER
Heads up: The modem will start its
special synchronisation sequence,
which can take up to 15 minutes.
Don’t panic, the lights will flash until it’s
finished and then stay on (the ‘Internet’
light may still flash intermittently).
You don’t need to wait for this to finish
before continuing with the next step.
NBN CONNECTION BOX
OPTUS WIFI MODEM
DSL
1
2
RESET
ETH1
ETH2
ETH3
ETH4
PWR
NBN CONNECTION BOX
DSL
1
2
RESET
ETH1
ETH2
OPTUS WIFI MODEM
ETH3
ETH4
PWR
Heads up: If you’re porting your number to Optus, it may take a day or two to complete
if you started the port outside of 8.30am–4.45pm, Monday to Friday AEST. You will
be able to make calls once the modem has been activated, however, you won’t be
able to receive calls on this number until the port is complete. We’ll flick you an SMS
to let you know when it’s back on deck.
STEP 3
CONNECT TO YOUR
SHINY NEW MODEM
USING CABLES? (RECOMMENDED)
To use your connection to its full potential, you should connect using Ethernet.
Grab the Ethernet cable with yellow connectors. Connect one end of the cable to the yellow
Ethernet Port on your shiny new modem and the other to the back of your computer.
STEP 4
START ’ER UP!
1
Open up a web browser on your computer or mobile device, type 192.168.0.1
in the Address Bar, then hit Go.
You should see the screen below. If you don’t see this screen, make sure all
the plugs and cables are connected properly. Turn your modem off and on.
If you’re still having problems, give us a call on 1300 300 427.
http://192.168.0.1
@
Connected
Optus WIFI Modem
SagemcomF@st.com
You are connected to the internet
NBN CONNECTION BOX
OPTUS WIFI MODEM
DSL
1
2
RESET
ETH1
ETH2
ETH3
ETH4
PWR
Welcome to Optus broadband, for further management of your modem please use the
left hand menu.
2
Now you can go to your favourite website and start enjoying your NBN connection.
Happy Surfing!
T
3
WIFI NETWORK NAME
If you’ve finished installing your Optus NBN Broadband, you probably don’t need your old
modem any more.
PREFER WIFI?
Just so you know, WiFi is a slower
technology than NBN using Ethernet
cables, so choosing WiFi might mean
you’re not using your connection to
its full potential. But if you want to
connect wirelessly, here’s how!
1
Locate the WiFi settings on your
computer or other device. These will
vary depending on the gadget you’re
connecting to. Give us a shout if
you’re having trouble finding them.
2
Enter the WiFi Network Name (SSID)
or select it from the list of available
networks, then enter the Password
that’s on your WiFi card.
PASSWORD
Heads-up: If you choose to customise
these settings, your details will be
different to what is printed on your
WiFi card. A factory reset will reverse
any settings you’ve customised, eg.
it will change back to the WiFi Network
Name and Password printed on the
WiFi card we sent you.
IT’S EASY BEING GREEN
We have over 10,000 people who work with us at Optus and we understand that individually
and as a group we can make a positive difference to the environment.
And we’d like to help you make one too.
The Australian Government has introduced a national, industry funded, recycling scheme for
televisions and computers, with hundreds of recycling drop off points around Australia.
Go to recyclingnearyou.com.au/ewastescheme to find one close to you and get rid of your old
modem and computer equipment responsibly.
Now, doesn’t that feel good!
WE HAVE
FAITH YOU’VE
CARRIED OUT
YOUR TASK
SPLENDIDLY
BUT IN CASE YOU NEED A LITTLE HELP,
HAVE FORGOTTEN YOUR PASSWORD
OR JUST WANT TO FIND OUT MORE,
CALL OUR TECHNICAL SUPPORT
TEAM ON 1300 300 427 OR GO TO
OPTUS.COM.AU/HELPME
OPTUS17744/1404791 DIY (02/14)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising