Spec Sheet 958/808/758 PDF

Spec Sheet 958/808/758 PDF
System
Select
One One of the options may be selected (not mandatory).
Must
Select
Once of the options must be selected (mandatory).
Job Separator JS-602 *
1
When attached to the
FS-537/FS-537SD, this
becomes the fax/print/copy
output separator tray.
Post Inserter PI-507*
Upgrade kit UK-212
Local Interface Kit EK-610
Wireless LAN kit
USB hub kit / Voice guidance
Keypad KP-101
Local Interface Kit EK-611
USB hub kit / Voice guidance /
mobile phone compatibility
1
Keyboard Holder KH-102
When attached to Finisher
FS-537/FS-537SD, allows you to add
white paper cover sheet/inter sheet,
and operate the Finisher manually.
Security Kit SC-508
* Two SC-508 are required.
Fax Kit FK-516
*1 PI-507 and JS-602 cannot be installed at the same time.
For 1st / 2nd line
Select
One
Fax Kit FK-515
For 3rd / 4th line
Punch Kit PK-523
Attach to Finisher
FS-537/FS-537SD for
hole punching
capability.
(paper up to 300 g/m2
thick)
* MK-742 is required.
Fax Mount Kit MK-742
Stamp Unit SP-501
Hard Disk HD-524
For Mirroring
Z Folding Unit
ZU-609
Double Feed Detection Kit UK-501
Includes Z-folding
function.
For ADF
Working Table WT-513
For Upright Panel
Select
One
Finisher FS-537
A high-performance
finisher that allows you to
multi-staple up to 100
sheets.
Finisher FS-537SD
Relay Unit
RU-515
Working Table
WT-506
Authentication Unit
AU-102
A high-performance
finisher that allows you
to multi-staple, saddle
stitching, half folding and
tri-folding.
Biometric type
* WT-506 or WT-513 is required.
Select
One
Authentication Unit
AU-201S
IC card type
Staple Kit MS-10A
Must
Select
* for FS-537/FS-537SD
Staple Kit SK-602
* for FS-536/FS-536SD/FS-537SD
* WT-506 or MK-735 is required.
However, AU-102 cannot be combined
when equipped with WT-506.
Output Tray OT-508
Mount Kit MK-735
For IC card authentication
installation
Built into front panel
Relay Unit
RU-515
Banner Paper
Setting Guide MK-715
Used for banner printing.
Punch Kit PK-520
Select
One
Attach to Finishers
FS-536/FS-536SD for
hole punching
capability
(paper up to 300 g/m2
thick)
Finisher FS-536
A small, low-noise and
high-performance finisher
that allows you to multistaple up to 50 sheets.
Note: Some options are not listed.
Finisher FS-536SD
A small, low-noise and
high-performance finisher that allows
you to multi-staple, saddle stitching,
half folding and tri-folding.
Large Capacity Unit
LU-205
Increases the bizhub's
paper capacity by 2,500
sheets for paper up to
SRA3 and 80 g/m2 thick.
Large Capacity Unit
LU-303
Increases the bizhub's
paper capacity by 3,000
sheets for paper up to A4
size and 80 g/m2 thick.
Specifcations
bizhub 958/808/758 General Specifications
bizhub 958
Type
Copy
Scan
Resolution
Print
Gradation
Memory size
HDD
Original Type
Max. Original Size
Output Size
Image Loss
Warm-Up Time*8 (23°C, std. voltage)
Scanning Function Specifications
bizhub 808
bizhub 758
Console
Main: 600dpi × Sub: 600dpi
1,800 dpi (equivalent) × 600 dpi
256
4 GB
250 GB
Sheets, Books, Objects
A3 (11" × 17")
Main unit: SRA3*1, A3 to A5,
12-1/4" × 18" (A3 wide (311.1 mm × 457.2 mm)),
12" × 18" (A3 wide (304.8 mm × 457.2 mm)), 11" × 17" to 8-1/2" × 11",
5-1/2" × 8-1/2", 8" × 13"*2, 16K*3, 8K, Postcard
Bypass Tray: SRA3, A3 to A5, B6*4, A6*4,
12" × 18" (A3 wide (304.8 mm × 457.2 mm)),
11" × 17" to 5-1/2" × 8-1/2", 8" × 13" *5, 16K, 8K,
Postcard (A6 (4" × 6" Card)), Envelope*6, Index paper,
Banner paper (Width: 210 mm to 297 mm (8-1/4" to 11-11/16"),
Length: 457 mm to 1,200 mm (18" to 47-1/4"))*7
Max. 4.2mm or less for top edge (5 mm for thin paper),
Max. 3.0mm or less for bottom edge,
Max. 3.0mm or less for right/left edges
*A loss of 4.2 mm each during printing.
55 sec. or less
99 sec. or less
22 sec. or less
* The time required to start printing when both the main
power and sub-power switches are turned from OFF to ON.
* The time required to start printing when the main
power switch is ON and the sub-power switch is turned
from OFF to ON.
First Copy Out Time*9
Copy Speed (A4)
Copy
Fixed Same Magnification
Magnification
Scaling Up
Scaling Down
Preset
Zoom
Lengthwise Crosswise
Individual Settings
Paper Capacity
Tray 1 / Tray 2
Tray 3
Tray 4
Bypass Tray
Max. Paper Capacity (80 g/m2) *10
11
Paper Weight * Main Unit
Multiple BypassTray
Multiple Copy
Auto Duplex
Paper Size
Paper Weight
Power Requirements
Max. Power Consumption
Dimensions [W] × [D] × [H]
Weight
Space Requirements [W] × [D]*12
55 sec. or less
99 sec. or less
3.2 sec. or less
95 ppm
80 ppm
1: 1±0.5% or les
1: 1.154/1.224/1.414/2.000
1: 0.866/0.816/0.707/0.500
3 types
25 to 400% (in 0.1% increments)
25 to 400% (in 0.1% increments)
22 sec. or less
3.6 sec. or less
75 ppm
500 sheets (up to SRA3)
1,500 sheets (up to A4)
1,000 sheets (up to A4)
150 sheets (up to SRA3)
6,650 sheets
52 to 256 g/m2
52 to 300 g/m2
1 to 9,999 sheets
SRA3, A3 to A5, B6*4, A6*4,
12-1/4" × 18" (A3 wide (311.1 mm × 457.2 mm)),
12" × 18" (A3 wide (304.8 mm × 457.2 mm)), 11" × 17" to
5-1/2" × 8-1/2"*4, 7-1/4" × 10-1/2", 8" × 13", 16K, 8K,
Postcard (A6 (4" × 6" Card))
52 to 256 g/m2
AC220 to 240 V
AC220 to 240 V 10 A (50/60 Hz)
15 A (50/60 Hz)
3.6 kW or less
2.1 kW or less
670 × 820 × 1,232 mm (26-3/8" × 32-5/16" × 48-1/2")
*Main unit + ADF
Approx. 200 kg (440-15/16 lb)
1,008 × 1,419 mm (39-11/16" × 55-7/8")
*1 SRA3 paper can be used in Tray2.
*2 There are four types of foolscap: 8-1/2" × 13-1/2"
, 8-1/2" × 13"
, 8-1/4" × 13"
, and 8" × 13"
. Any one of these
sizes is selectable. For details, contact your service representative.
*3 Long edge feed
*4 Short edge feed
*5 There are six types of foolscap: 8-1/2" × 13-1/2"
, 220 mm × 330 mm
, 8-1/2" × 13"
, 8-1/4" × 13"
,
8-1/8" × 13-1/4"
, and 8" × 13"
. Any one of these sizes is selectable. For details, contact your service representative.
*6 Wrinkles or printing errors may occur due to the type, storage or environment that exists when envelope printing is carried
out.
*7 Printing on banner paper can only be performed from a PC.
*8 May vary depending on the operating environment and usage.
*9 A4 long edge feed full size/using the first tray/scanning from the original glass surface.
*10 With options installed.
*11 If paper of 210 g/m2 or more is used, the resulting image quality may not be as expected.
*12 This shows the dimensions when the Paper Trays are pulled out and the Tray Extension of the Bypass Tray is opened.
Type
Interface
Driver
Protocol
Scanning Speed *1
(Colour/B&W)
Scanning Size
Output Format
Simplex
Duplex
Scanning Resolution
Push
Pull
Main Functions
Other Functions
Supported operating systems*3
Full-Colour Scanner
Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
TWAIN Driver, HDD TWAIN Driver
TCP/IP (FTP, SMB, SMTP, WebDAV) (IPv4/IPv6)
120 opm
240 opm
Max. A3 (11" × 17")
TIFF, JPEG, PDF, Compact PDF, XPS, Compact XPS,
OOXML (pptx, xlsx*2, docx*2), Searchable PDF*2, PDF/A*2,
Linearised PDF*2
200 dpi / 300 dpi / 400 dpi / 600 dpi
100 dpi / 200 dpi / 300 dpi / 400 dpi / 600 dpi
Scan to E-Mail, Scan to FTP, Scan to BOX (HDD), Scan to PC (SMB),
Network TWAIN, Scan to WebDAV, Scan to Me, Scan to Home,
Scan to USB, Scan to Scan Server, Scan to Web Service (WSD-Scan),
Device Profile for Web Services (DPWS)
Multi-Method Send, Authentication at the time of E-Mail send
(SMTP authentication, POP before SMTP), S/MIME, Annotation
Windows Vista / 7 / 8.1 / 10
*1 Speed when scanning A4 original in 300 dpi or less by using the ADF.
*2 Optional
*3 Supports the 32bit (x86) or 64bit (x64) environment.
Dual Scan Document Feeder
Type
Support Paper Size
Mixed Size
Original Set
Support Paper Weight
Paper Capacity
Productivity*1
Simplex
Duplex
Power Requirements
Dimensions [W] × [D] × [H]
Weight
Dual Scan Document Feeder
Max. A3 (Fax mode: Max. 1,000 mm)
Support
Centre guide
Thin paper: 35 to 49 g/m2 (Simplex)
Plain paper: 50 to 210 g/m2 (Simplex/Duplex),
50 to 128 g/m2 (Mixed Original)
Max. 300 sheets (80 g/m2)
Colour/B&W: 80 opm
Colour/B&W: 160 opm
Supplied from the MFP main body
618 × 575 × 180 mm (24-5/16" × 22-5/8" × 7-1/16")
Approx. 15.1 kg (33-5/16 lb)
*1 When copying A4, resolution 600 dpi.
Internet Fax
Protocol
Connection Mode
Sending Paper Size
Recording Paper Size
Resolution
Interface
Colour
Format
SMTP, POP
Full-Mode
A3, B4, A4
Max. A3
200 × 100 dpi, 200 × 200 dpi, 400 × 400 dpi, 600 × 600 dpi
Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
Support Colour Internet Fax
Send: TIFF-F, Receive: TIFF-F
Colour/Grey Scale: TIFF (RFC3949 Profile-C)
Fax Kit FK-516 , Fax Kit FK-515 (Optional)
Communication
Compatible Lines
Line Density
Modem Speed
Compression
Sending Paper Size
Recording Paper Size
Transmission Speed
Memory
Number of Abbr. Dials
Number of Program Dials
Number of Group Dials
Sequential Multiple Station Transmission
Super G3
Public Switch Telephone Network, Private Branch Exchange,
Fax Communication Line
G3 (8 dot/mm × 3.85 line/mm, 600 × 600 dpi)
2.4 to 33.6 kbps
MH/MR/MMR/JBIG
Max. A3 (Long Length Support: Max.1,000 mm)
Max. A3 (Long Length Max. 1,000 mm – following the page division –)
Less than 3 sec. (A4, V.34, 33.6 kbps, JBIG)
Shared with the copier
2,000
400
100
Max. 600
Printer Specifications
Type
CPU
Memory
Print Speed
HDD
Print Resolution
PDL
Protocol
Support OS
PCL
PS
XPS
Fonts
Interface
PCL
PS
Embedded
MB86S72 (1.6GHz)
4 GB
Same as Copy Speed (when using the same original)
250GB
1,800 dpi (equivalent) × 600 dpi (at smoothing) or
1,200 dpi × 1,200 dpi (in 1,200 dpi mode)*1
PCL5e/c Emulation, PCL6 (XL ver. 3.0) Emulation,
PostScript 3 Emulation (3016), XPS (Ver. 1.0)
TCP/IP (LPD, Raw, SMB, IPP), AppleTalk, IPX/SPX
Windows Vista*2 / 7*2 / 8.1*2 / 10*2
Windows 2008*2 / 2008 R2 / Server 2012 / Server 2012 R2
Windows Vista*2 / 7*2 / 8.1*2 / 10*2
Windows 2008*2 / 2008 R2 / Server 2012 / Server 2012 R2
Mac OS X 10.7 / X 10.8 / X 10.9 / X 10.10 / X 10.11(Intel)
Linux
Windows Vista*2 / 7*2 / 8.1*2 / 10*2
Windows 2008*2 / 2008 R2 / Server 2012 / Server 2012 R2
European 80 fonts
European 137 fonts
Ethernet (1000BaseT/ 100BaseTX/ 10BaseT), USB 2.0 / 1.1
*1 Output speed will be reduced.
*2 Supports the 32bit (x86) or 64bit (x64) environment.
Large Capacity Unit LU-303 (Optional)
Support Paper Type (Weight)
Support Paper Size
Paper Capacity
Power Requirements
Max. Power Consumption
Dimensions [W] × [D] × [H]
Weight
Thin paper (52 to 59 g/m2), Plain paper (60 to 90 g/m2),
Thick paper (91 to 256 g/m2)
A4*1, 8-1/2" × 11" *1
Plain paper: 3,000 sheets (80 g/m2)/3,300 sheets (60 g/m2)
Thick paper 1: 2,500 sheets, Thick paper 1+: 1,750 sheets,
Thick paper 2: 1,550 sheets, Thick paper 3: 1,300 sheets
Supplied from the MFP main body
40 W or less
367 × 528 × 405 mm (14-7/16" × 20-13/16" × 15-15/16")
Approx. 18 kg (39-11/16 lb)
*1 Long edge feed
* Thick paper 1: 91 to 120 g/m2 , Thick paper 1+: 121 to 157 g/m2, Thick paper 2: 158 to 209 g/m2, Thick paper 3: 210 to 256 g/m2
Large Capacity Unit LU-205 (Optional)
Support Paper Type (Weight)
Support Paper Size*
Paper Capacity
1
Power Requirements
Max. Power Consumption
Dimensions [W] × [D] × [H]
Weight
Thin paper (52 to 59 g/m2), Plain paper (60 to 90 g/m2),
Thick paper (91 to 256 g/m2)
SRA3 to A4, 12" × 18" to 8-1/2" × 11"
Plain paper: 2,500 sheets (80 g/m2)/2,750 sheets (60 g/m2)
Thick paper 1: 2,000 sheets, Thick paper 1+: 1,450 sheets,
Thick paper 2: 1,250 sheets, Thick paper 3: 1,000 sheets
Supplied from the MFP main body
40 W or less
629 × 556 × 405 mm (24-3/4" × 21-7/8" × 15-15/16")
Approx. 25 kg (55-1/8 lb)
*1 The maximum number of loadable sheets for each paper size is 2,500 sheets (for 80 g/m2) or 2,750 sheets (for 60 g/m2).
* Thick paper 1: 91 to 120 g/m2 , Thick paper 1+: 121 to 157 g/m2, Thick paper 2: 158 to 209 g/m2, Thick paper 3: 210 to 256 g/m2
Specifcations
Finisher FS-537 (Optional)
Punch Kit PK-523 (Optional)
Type
Support Paper Type
Applicable
Number of holes
Support Paper Type (Weight)
Finisher
Thin paper / Plain paper (52 to 90 g/m2) , Thick paper (91 to 220 g/m2),
Transparency, Envelope, Label sheet, Letterhead paper, Tab paper
Support Paper Size
A3 to A5, B6*1, A6*1, 11" × 17" to 5-1/2" × 8-1/2", 16K, 8K,
Postcard (A6 (4" × 6" Card))
Mode
Sort, Group, Offset Sort, Offset Group, Staple
Stacking
Output Tray 1
200 sheets (52 to 90 g/m2)
capacity
20 sheets (91 to 220 g/m2, special paper)
Output Tray 2
3,000 sheets (52 to 90 g/m2, A4*1 or smaller, B5 or larger)
1,500 sheets (52 to 90 g/m2, B4 or larger)
500 sheets (52 to 90 g/m2, A5 or smaller)
20 sheets (91 to 220 g/m2, special paper)
Output Tray 3
100 sheets (52 to 90 g/m2)
(Relay Unit top surface) 20 sheets (91 to 220 g/m2, special paper)
Staple capacity
100 sheets (Thin paper, Plain paper 52 to 80 g/m2)
30 sheets (Plain paper 81 to 90 g/m2)
35 sheets (Coated paper 81 to 90 g/m2)
2 sheets (Thick paper 91 to 209 g/m2 Cover sheets only)
Power Requirements
Supplied from the MFP main body
Max. Power Consumption
140 W or less
Dimensions [W] × [D] × [H]
622 × 692 × 1,031 mm (24-1/2" × 27-1/4" × 40-9/16")
Weight
Approx. 47 kg (103-5/8 lb)
*1 Short edge feed
Finisher FS-537SD (Optional)
Type
Support Paper Type
Support Paper Size
Mode
Staple capacity
Maximum Number of Sheets that
can be Centrestapled
Maximum Number of Folded Sheets
Stacking
capacity
Output Tray 1
Output Tray 2
Output Tray 3
(Relay Unit top surface)
Folding output tray
Power Requirements
Max. Power Consumption
Dimensions [W] × [D] × [H]
Weight
Finisher
Thin paper / Plain paper (52 to 90 g/m2) , Thick paper (91 to 220 g/m2),
Transparency, Envelope, Label sheet, Letterhead paper, Tab paper
Centre Staple: 52 to 90 g/m2
Half-Fold: 52 to 209 g/m2
(more than 91 g/m2 Thick paper can be used only as a cover page)
Tri-Fold: 52 to 90 g/m2
A3 to A5, B6*1, A6*1, 11" × 17" to 5-1/2" × 8-1/2", 16K, 8K,
Postcard (A6 (4" × 6" Card))
Centre Staple, Half-Fold: SRA3, A3, B4, A4*1, 11" × 17", 8-1/2" × 14",
8-1/2" × 11"*1, 8K
Tri-Fold: A4*1, 8-1/2" × 11"*1, 16K*1
Sort, Group, Offset Sort, Offset Group, Staple
100 sheets (Thin paper, Plain paper 52 to 80 g/m2)
30 sheets (Plain paper 81 to 90 g/m2)
35 sheets (Coated paper 81 to 90 g/m2)
2 sheets (Thick paper 91 to 209 g/m2 Cover sheets only)
20 (52 to 90 g/m2) sheets, or
19 (90 g/m2) sheets + Thick (209 g/m2) 1 sheet
Half-Fold: 5 sheets or Thick (91 to 209 g/m2) 1 sheet,
Tri-Fold: 3 sheets
200 sheets (52 to 90 g/m2)
20 sheets (91 to 220 g/m2, special paper)
2,500 sheets (52 to 90 g/m2, A4*1 or smaller, B5 or larger)
1,500 sheets (52 to 90 g/m2, B4 or larger)
500 sheets (52 to 90 g/m2, A5 or smaller)
20 sheets (91 to 220 g/m2, special paper)
100 sheets (52 to 90 g/m2)
20 sheets (91 to 220 g/m2, special paper)
1 to 5 sheets: 35 sets
6 to 10 sheets: 30 sets
11 to 20 sheets: 10 sets
Half-Fold (1 to 5 sheet): 35 sets
Tri-Fold (1 sheet): 50 sets, (2 sheet): 40 sets, (3 sheet): 30 sets
Supplied from the MFP main body
140 W or less
622 × 692 × 1,031 mm (24-1/2" × 27-1/4" × 40-9/16")
Approx. 73 kg (160-15/16 lb)
*1 Short edge feed
Post Inserter PI-507 (Optional)
Applicable
Support Paper Type (Weight)
Support Paper
Size
Upper Tray
Lower Tray
Paper Capacity
Power Requirements
Dimensions [W] × [D] × [H]
Weigh
Finisher FS-537/FS-537SD
Plain paper (60 to 90 g/m2)
Thick paper (91 to 209 g/m2)
A4, B5, A5*1
8-1/2" × 11", 7-1/4" × 10-1/2"*2, 5-1/2" × 8-1/2",16K
SRA3, A3 to A5*1
12-1/4" × 18" (A3 wide (311.1 × 457.2mm)), 11" × 17" to 5-1/2" × 8-1/2"*1,
16K, 8K
200 sheets (Plain paper, 80 g/m2)
Supplied from Finisher FS-537/FS-537SD
513 × 635 × 222 mm (20-3/16" × 25" × 8-3/4")
Approx.12 kg (26-7/16 lb)
Support Paper Size
Power Requirements
Dimensions [W] × [D] × [H]
Weight
Finisher FS-537/FS-537SD
2 holes, 3 holes, 4 holes
Thin paper (52 to 59 g/m2), Plain paper (60 to 90 g/m2),
Thick paper (91 to 300 g/m2)
A3 to A5,
11" × 17" to 5-1/2" × 8-1/2", 8" × 13", 16K, 8K
Supplied from Finisher FS-537/FS-537SD
147 × 639 × 234 mm (5-13/16" × 25-3/16" × 9-3/16")
Approx. 4.5 kg (9-15/16 lb)
Finisher FS-536 (Optional)
Type
Support Paper Type
Finisher
Thin paper / Plain paper (52 to 90 g/m2) , Thick paper (91 to 220 g/m2),
Transparency, Envelope, Label sheet, Letterhead paper, Tab paper
Support Paper Size
A3 to A5, B6*1, A6*1, 11" × 17" to 5-1/2" × 8-1/2", 16K, 8K,
Postcard (A6 (4" × 6" Card))
Mode
Sort, Group, Offset Sort, Offset Group, Staple
Stacking
Output Tray 1
200 sheets (52 to 90 g/m2)
capacity
20 sheets (91 to 220 g/m2, special paper)
Output Tray 2
3,000 sheets (52 to 90 g/m2, A4*1 or smaller, B5 or larger)
1,500 sheets (52 to 90 g/m2, B4 or larger)
500 sheets (52 to 90 g/m2, A5 or smaller)
20 sheets (91 to 220 g/m2, special paper)
Output Tray 3
100 sheets (52 to 90 g/m2)
(Relay Unit top surface) 20 sheets (91 to 220 g/m2, special paper)
Staple capacity
50 sheets (Thin paper, Plain paper 52 to 90 g/m2)
30 sheets (Thick paper 91 to 120 g/m2)
15 sheets (Coated paper 121 to 209 g/m2)
Power Requirements
Supplied from the MFP main body
Max. Power Consumption
105 W or less
Dimensions [W] × [D] × [H]
528 × 641 × 1,023 mm (20-5/8" × 25-1/4" × 40-1/4")
Weight
Approx. 36 kg (79-3/8 lb)
*1 Short edge feed
Finisher FS-536SD (Optional)
Type
Support Paper Type
Support Paper Size
Mode
Staple capacity
Maximum Number of Sheets that
can be Centrestapled
Maximum Number of Folded Sheets
Stacking
capacity
Output Tray 1
Output Tray 2
Output Tray 3
(Relay Unit top surface)
Folding output tray
Power Requirements
Max. Power Consumption
Dimensions [W] × [D] × [H]
Weight
Finisher
Thin paper / Plain paper (52 to 90 g/m2) , Thick paper (91 to 220 g/m2),
Transparency, Envelope, Label sheet, Letterhead paper, Tab paper
Centre Staple: 52 to 90 g/m2
Half-Fold: 52 to 90 g/m2
(more than 91 g/m2 Thick paper can be used only as a cover page)
Tri-Fold: 52 to 90 g/m2
A3 to A5, B6*1, A6*1, 11" × 17" to 5-1/2" × 8-1/2", 16K, 8K,
Postcard (A6 (4" × 6" Card))
Centre Staple, Half-Fold: SRA3, A3, B4, A4*1, 11" × 17", 8-1/2" × 14",
8-1/2" × 11"*1, 8K
Tri-Fold: A4*1, 8-1/2" × 11"*1, 16K*1
Sort, Group, Offset Sort, Offset Group, Staple
50 sheets (Thin paper, Plain paper 52 to 90 g/m2)
30 sheets (Thick paper 91 to 120 g/m2)
15 sheets (Coated paper 121 to 209 g/m2)
20 (52 to 90 g/m2) sheets, or
19 (90 g/m2) sheets + Thick (209 g/m2) 1 sheet
Half-Fold: 5 sheets or Thick (91 to 209 g/m2) 1 sheet,
Tri-Fold: 3 sheets
200 sheets (52 to 90 g/m2)
20 sheets (91 to 220 g/m2, special paper)
2,000 sheets (52 to 90 g/m2, A4*1 or smaller, B5 or larger)
1,500 sheets (52 to 90 g/m2, B4 or larger)
500 sheets (52 to 90 g/m2, A5 or smaller)
20 sheets (91 to 220 g/m2, special paper)
100 sheets (52 to 90 g/m2)
20 sheets (91 to 220 g/m2, special paper)
1 to 3 sheets: 20 sets
4 to 10 sheets: 10 sets
11 to 20 sheets: 5 sets
Tri-Fold (1 sheet): 30 sets
Tri-Fold (2 to 3 sheets): 10 sets
Supplied from the MFP main body
140 W or less
622 × 692 × 1,031 mm (24-1/2" × 27-1/4" × 40-9/16")
Approx. 60 kg (132-5/16 lb)
*1 Short edge feed
*1 Long edge feed
*2 Short edge feed
Punch Kit PK-520 (Optional)
Job Separator JS-602 (Optional)
Applicable
Support Paper Type (Weight)
Support Paper Size
Power Requirements
Max. Power Consumption
Dimensions [W] × [D] × [H]
Weight
Finisher FS-537/FS-537SD
Plain paper (60 to 90 g/m2)
A3 to B5, A4*1, A5*1
11" × 17" to 7-1/4" × 10-1/2", 5-1/2" × 8-1/2"*1, 8" × 13", 16K, 8K
Supplied from Finisher FS-537/FS-537SD
5 W or less
341 × 537 × 149 mm (13-7/16" × 21-1/8" × 5-7/8")
Approx.1.75 kg (3-7/8 lb)
*1 Short edge feed
Z Folding Unit ZU-609 (Optional)
Applicable
Paper Type
Paper Size
Paper Weight
Power Requirements
Dimensions [W] × [D] × [H]
Weight
Finisher FS-537/FS-537SD
Thin paper, Plain paper
A3, B4, 11" × 17", 8-1/2" × 14", 8K
52 to 90 g/m2
Supplied from Finisher FS-537/FS-537SD
101 × 506 × 186 mm (4" × 19-15/16" × 7-5/16")
Approx. 4.5 kg (9-15/16 lb)
Applicable
Number of holes
Support Paper Type (Weight)
Support Paper Size
Power Requirements
Dimensions [W] × [D] × [H]
Weight
Finisher FS-536/FS-536SD
2 holes, 3 holes, 4 holes
Thin paper (52 to 59 g/m2), Plain paper (60 to 90 g/m2),
Thick paper (91 to 300 g/m2)
A3 to A5,
11" × 17" to 7-1/4" × 10-1/2", 16K, 8K
Supplied from Finisher FS-536/FS-536SD
61 × 492 × 142 mm (2-3/8" × 19-3/8" × 5-9/16")
Approx. 1.8 kg (3-15/16 lb)
i-Option
Model
Note
Function
i-Option LK-102 v3
Encrypted PDF or PDF/A (1a/1b)
i-Option LK-104 v3
Voice guidance*1
i-Option LK-105 v4
Searchable PDF
i-Option LK-106
Barcode font (Code39, QR Code, PDF417)
i-Option LK-107
Unicode font
i-Option LK-108
OCR font (OCR-A, OCR-B (PCL))
i-Option LK-110 v2
File format extension package
i-Option LK-111
ThinPrint function
i-Option LK-114
Server-less Pull Printing function
i-Option LK-115 v2
TPM function
Not available in China.
*1 Local Interface Kit EK-610 or EK-611 is required.
Space Requirements
Dimensions (unit: mm)
bizhub 958/808/758 + OT-508
1,419
498
921
820
1,008
895
670
535.5
182
1,585.5
1,232
1,050
1,050
bizhub 958/808/758 + RU-515 + FS-537SD + LU-205
bizhub 958/808/758 + RU-515 + FS-536SD + LU-303
2,054
238
1,452
758
1,670
130
602
670
340
401
1,200
340
670
627
1,106 1,062
1,232
1,065 1,023
05/2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising