honeywell-lynx-touch..
LYNX Touch
Security System
Programming Guide
800-13468
12/12 Rev. A
L5100
Table of Contents
Entering Programming Mode ................................................................................................................................... 3
Programming the Data Fields ................................................................................................................................... 3
Loading a Default Set ............................................................................................................................................... 3
Exiting Programming Mode ...................................................................................................................................... 3
Data Fields ............................................................................................................................................................... 4
Change Installer Code........................................................................................................................................... 4
Program System Type........................................................................................................................................... 4
Program Date and Time ........................................................................................................................................ 4
Program Communications .................................................................................................................................... 6
Program Zones ..................................................................................................................................................... 7
Program Keys........................................................................................................................................................ 8
Program Reporter ................................................................................................................................................. 9
Program Sounder ................................................................................................................................................ 14
Program System Settings ................................................................................................................................... 14
Program the Z-Wave Module .............................................................................................................................. 16
Zone Programming Worksheet .............................................................................................................................. 17
Explanation of Zone Assignment Table Headings .............................................................................................. 18
5800 Series Transmitter Loop Numbers Diagram .................................................................................................. 19
Programming Default Values ................................................................................................................................. 20
LYNX Touch Series Summary of Connections Diagram ........................................................................................ 23
Refer to the LYNX Touch Series Installation and Setup Guide P/N 800-10614V1 or later for detailed information on
programming the system. The Installation and Setup Guide contains full descriptions for all data fields.
UL
LYNX Touch SIA is not intended for UL985 Household Fire applications unless a 24-hour
backup battery (P/N LYNXRCHKIT-SHA) is installed.
-2-
Entering Programming Mode
You may find it convenient to adjust the volume setting before entering the Programming Mode. This
will allow you to clearly hear feedback announcements or system beeps.
1. Power up the LYNX Touch SIA control, when the Home Screen appears, select “More”.
2. Select “Tools”. The system displays a virtual keypad.
3. Enter: Installer Code (4 + 1 + 1 + 2).
4. The System Programming Screen is displayed. Select “Program”. The Armed and Ready LEDs will flash and
the following options will be displayed:
System Type
Installer Code
Communicator
Date Time
Comm. Diagnostics
Zones
Reporter
Keys
Use the down T arrow to scroll to the next page of options.
Sounder
Default Config.
Reset Master Code
System Settings
Z-Wave
5. Select an option to advance to that Programming screen.
Note: If a different Installer Code has been programmed, enter: the New Installer Code.
Programming the Data Fields
1. Select each desired programming option, and then select the required entry. The system beeps each time a
selection is made.
2. The system will toggle or scroll through the options or display a new screen as required for the specific
option.
3. To delete or change an entry, simply select the desired option, and then select the required entry.
Loading a Default Set:
1. Enter the Installer Programming Mode and advance to second page of the System Programming.
2. Select ‘Default Config’ and select the appropriate Default Configuration from the following options or Select
Default Downloader to reset all subscriber account numbers and CSID in preparation for an initial download:
Default Config 1
Default Config 2
Default Config 3
Default Config 4
Default Downloader
Note: Refer to the Programming Default Values section of this manual to view the default values.
Exiting Programming Mode:
1. Select the “2” key to exit the current screen. The system returns to the previous screen.
2. Select the “2” key as required until system displays a Confirmation screen.
3. Select “Yes” to allow the installer to re-enter Programming mode or “No” to prevent re-entry.
4. Select the “2” key again to return to the Home Screen.
-3-
Screen Display
Function & Programming Options
DATA FIELDS
Note: Preprogrammed defaults are shown on the screen display.
Change Installer Code
Installer Code
Installer Code
Enter 4 digits [The defaulted Installer Code is 4112]
0-9
5000-100-129-V0
Program System Type
RF Jam
Disabled
Speaker Phone
Enabled
Two Way Voice
Disabled
RF House Code
0
Phone Notification
Disabled
RF Jam
Disabled
RF Jam Log
RF Jam Log & Report
Speaker Phone
Disabled
Enabled
Two-Way Voice
Disabled
Enabled
RF House Code
Enter 2 digits, 00-31
Phone Notification
Disabled
Keypad
Trouble
Note:
Phone Detect Time
2 Minutes
Remote Phone
Enabled
Events - Log All
Press To Log All
Events – Log Alarm
Enabled
Events – Log Bypass
Disabled
Events – Log Open Close
Disabled
Events – Log Trouble
Enabled
Non Security
Disabled
If “Keypad” or “Trouble” is selected you will be prompted to program a phone detect time.
Phone Detect Time
1 Minute
2 Minutes
3 Minutes
4 Minutes
Remote Phone
Disabled
Enabled
Events – Log All
Note: If Press to Log All is selected the system will log the following events:
Alarm
Bypass
Open/Close
Trouble
Non-Security
Events – Log Alarm
Enabled
Disabled
Events – Log Bypass
Enabled
Disabled
Events - Log Open/Close
Enabled
Disabled
Events – Log Trouble
Enabled
Disabled
Non Security
Enabled
Disabled
-4-
Screen Display
Remote Access Serial
Disabled
Function & Programming Options
Remote Access Serial
Enabled
Disabled
Note: If the “Remote Access Serial” option is enabled, you will be prompted to select a “Multi Mode
Serial”.
Multi Mode Serial
Disabled
Multi Mode Serial
Enhanced Reports
Disabled
Program Date and Time
Date Time
Date Time
5000-100-131-V0
Note: If you are installing a GSMVLP54G or ILP5 Communication Module, the time and date will be
programmed and updated automatically via Central Station. You must still program the correct
Time Zone below.
1.
2.
3.
4.
5.
Time Zone
Eastern (EST)
Day Light Savings Time
Yes
Start Month
March
Start Week
Second
End Month
November
End Week
First
Month and Year
Select the correct date
Enter the correct time
Select AM or PM
Select Save or continue below.
Time Zone
Eastern (EST)
Central (CST)
Hawaii (HAST)
Mountain (MST)
Pacific (PST)
Alaska (AKST)
Atlantic (AST)
Newfoundland (NT)
Day Light Savings Time
Yes
No
Note: If Yes is selected, the following options will be active.
Start Month
January
February
March
April
May
June
July
August
September
October
November
December
Start Week
First
Second
Third
Fourth
Last
Next to Last
3rd from Last
End Month
January
February
March
April
May
June
July
August
September
October
November
December
Start Week
First
Second
Third
Fourth
Last
Next to Last
3rd from Last
-5-
Screen Display
Function & Programming Options
Program Communications
Communicator
5000-100-132-V0
Communications Path
None
APL
Disabled
City ID
CS ID
Sub ID
Supervision
24 Hours
Old Alarm Time
10 Minutes
Remote Acc. Comm.
Disabled
Communicator
Program the following options:
Communications Path
City ID
CS ID
Supervision
Remote Acc. Comm.
GSM Fault Time OR
IP Fault Time
APL
Sub ID
Old Alarm Time
Multi Mode Comm.
Communications Path
None
IP
GSM
WiFi
WiFi & GSM
Advanced Protection Logic
Enabled
Disabled
Primary City Identification
Enter 2 digits
01-99
Primary Central Station Identification
Enter 2-digits (HEX)
01-FE
Primary Subscriber Identification
Enter 4-digits
0001-9999
Supervision
24 Hours
None
30 Days
Old Alarm Time
10 Minutes
30 Minutes
2 Hours
8 Hours
24 Hours
15 Minutes
1 Hour
4 Hours
12 Hours
Remote Access Communication
Disabled
Enabled
Note: If enabled the following option will be active.
Multi Mode Comm.
Disabled
GSM Fault Time (min)
00
IP Fault Time (min)
00
Use DHCP
Yes
Multi Mode Communication
Disabled
Relay Reports
Enhanced Reports
GSM Fault Time (min) (displayed if GSM is selected as Communications Path)
Enter 2-digits
00-99
IP Fault Time (min) (displayed if IP is selected as Communications Path)
Enter 2-digits
00-99
Use DHCP
Yes
No
Note: If disabled the following options will be active.
NIC IP Address
255.255.255.255
IP Fault Time
Enter 4 part address
-6-
Screen Display
Subnet Mask
255.255.255.255
Gateway IP Address
255.255.255.255
DNS Server IP Address
255.255.255.255
Function & Programming Options
Subnet Mask
Enter 4 part address
Gateway IP Address
Enter 4 part address
DNS Server Address
Enter 4 part address
Program Zones
Zones
5000-100-133-V0
Serial Number
Zones
Select from the following zone options:
2. Front Door
1. New
4.Window
3. Back Door
6.New
5. Motion Sensor
7. – 7. – 45. New
46. – 48. New (Main)* Garage
49. – 56. 4 Button
57. – 64. New
* (Zones 46 to 48 are reserved for Garage Door Zones)
80. – 85. Temperature
95. Fire
96. Medical
99. Police
Select a zone and then select “Edit” or “Add New” to program the next available zone.
Program the following options:(dependent upon Zone Type):
Serial Number
Loop Number
Zone Description 1
Zone Description 2
Device Type
Response Type
Report
Chime
Supervision
Serial Number
When “Serial Number” has been selected “Enter Serial Number or Activate” is displayed.
The transmitter serial number and loop number can be enrolled via RF transmission OR
manually.
Enroll via RF Learning To enroll the device using RF Learning mode three transmissions
(open/close) of the device will be required. The initial transmission activates the RF
Learning mode and the system will emit a single beep. A second transmission enrolls the
serial number and the system beeps two times and displays “Activate Sensor Again To
Confirm”. A third transmission will confirm the serial number. The system beeps two times
and returns to the Zone programming Screen.
Enroll Manually
Enter the 7-digit serial number printed on the transmitter using the displayed keypad and
select “Done”. The system beeps one time and returns to the Zone programming Screen.
Loop Number
1
Zone Description 1
Zone Description 2
Device Type
Loop Number
1, 2, 3 or 4
Zone Description 1
The system announces the Zone Description. If desired, enter a zone descriptor.
Zone Description 2
The system announces the Zone Description. If desired, enter a zone descriptor.
Device Type
Choose from the following options (dependant upon the Zone):
New
Door
Window
Motion Sensor
Glass Break
Smoke Detector
Heat Sensor
Carbon Mono. Det.
Temperature
Flood
Environmental
Medical
Fire
Police
Garage Door
Other
-7-
Screen Display
Response Type
Not Used
Report
Yes
Chime
No
Supervision
Supervised
Function & Programming Options
Response Type
Choose from the following options (dependant upon the Device Type):
Not Used
Arm Stay
Fire No Verification
Entry Exit 1
Disarm
Monitor
Entry Exit 2
Silent Burglary
Garage
Interior Follower
Resident Response
Arm Away
24 Hour Silent
General Response
No Response
24 Hour Auxiliary
Perimeter
Resident Monitor
Interior With Delay
Day Night
General Monitor
Carbon Monoxide
24 Hour Audible
Fire With Verification
Garage Monitor
Trouble
Report
Yes
No
Chime
Yes
No
Supervision
Hardwire Zone
Normal Open
Normal Closed
End of Line
Temperature
High Temp
Low Temp
RF Zone
Supervised
Unsupervised
Program Keys
Keys
Keys
Select from the following options:
Edit
Add New
Delete
If add new is selected the following options can be programmed:
Key Type
4 Button Key
User
Key Type
Serial Number
Button Key 1 – Zn 49
Button Key 3 – Zn 51
Button Key 5 – Zn 53
Button Key 7 – Zn 55
Key Type
1 Button Key.
2 Button Key
4 Button Key
6 Button Key
8 Button Key
User
Master
Duress
Babysitter
User 3 through User 14
User
Zone
Button Key 2 – Zn 50
Button Key 4 – Zn 52
Button Key 6 – Zn 54
Button Key 8 – Zn 56
Note: The Key must be associated with a specific User/User Code in order for it to operate. Refer to the
LYNX Touch Series User Guide for additional Information regarding User Codes.
Serial Number
0
Serial Number
When “Serial Number” has been selected “Enter Serial Number or Activate” is displayed.
The transmitter serial number and loop number can be enrolled via RF transmission OR
manually.
Enroll via RF Learning To enroll the device using RF Learning mode three transmissions
(open/close) of the device will be required. The initial transmission activates the RF
Learning mode. A second transmission enrolls the serial number and the system beeps two
times and displays “Activate Sensor Again To Confirm”. A third transmission will confirm the
serial number. The system beeps two times and returns to the Zone programming Screen.
Enroll Manually
Enter the 7-digit serial number printed on the transmitter using the displayed keypad and
select “Done”. The system beeps one time and returns to the Zone programming Screen
Zone
49
Zone
Manually enter a specific two-digit Zone Number (49-64).
-8-
Screen Display
Button Key * - Zone *
Function & Programming Options
Button Key * Zn *
Enter a function for each button key from the following options:
Disarm
Arm Away
Arm Stay
No Response
24 Hour Silent
24 Hour Audible
24 Hour Auxiliary
Silent Burglary
Fire No Verification
* Options are the same for each Button/Zone combination.
Program Reporter
Reporter
Primary CS Info
Phone Type
Contact Id: 4 Digit
Reporter
Program the following options:
Primary CS Info
Follow Me Phone 1
Report Selection
Downloader
Primary Central Station Information
Phone Type
Communicator Type
Phone Type
None
Contact Id : 4 Digit
Contact Id : 10 Digit
SIA
Note:
Communicator Type
None
Secondary CS Info
Follow Me Phone 2
Options
If SIA, Contact Id: 4 Digit, or Contact Id: 10 Digit is selected the Phone Number and Account
Number options will be displayed.
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Phone Number
Enter the Primary Central Station Phone Number (Up to 20 digits)
Account Number
FFFF
Account Number
Enter the Primary Central Station Account Number
Dynamic Priority
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note:
Dynamic Delay
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
-9-
Screen Display
Report Tests
Enabled
Secondary CS Info
Phone Type
None
Function & Programming Options
Report Tests
Always Enabled (not selectable)
Secondary Central Station Information
Phone Type
Communicator Type
Phone Type
None
Contact Id: 4 Digit
Contact Id: 10 Digit
SIA
Note: If SIA, Contact Id: 4 Digit or Contact Id: 10 Digit is selected, the Phone Number and Account
Number options will be displayed.
Communicator Type
None
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Phone Number
Enter the Secondary Central Station Phone Number (Up to 20 digits)
Account Number
FFFF
Account Number
Enter the Secondary Central Station Account Number
Dynamic Priority
None
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note: If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
None
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
Report Tests
Enabled
Follow Me Phone 1
Phone Type
None
Dynamic Delay
None
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Report Tests
Always Enabled (not selectable)
Follow Me Phone 1
Choose from the following options:
Phone Type
Phone Number
Report All
Report Alarms
Report Troubles
Report Open/Close
Report Tests
Phone Type
None
Follow me
- 10 -
Screen Display
Phone Type
None
Report All
Press to Report All
Report Alarms
Disabled
Report Troubles
Disabled
Report Open/Close
Disabled
Report Tests
Disabled
Follow Me Phone 2
Phone Type
None
Phone Number
Report All
Press to Report All
Report Alarms
Disabled
Report Troubles
Disabled
Report Open/Close
Disabled
Report Tests
Disabled
Report Selection
Function & Programming Options
Phone Number
Enter the Follow Me Phone Number
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Report Tests
Disabled
Enabled
Follow Me Phone 2
Choose from the following options:
Phone Type
Phone Number
Report All
Report Alarms
Report Troubles
Report Open/Close
Report Tests
Phone Type
None
Follow me
Phone Number
Enter the Follow Me Phone Number
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Report Tests
Disabled
Enabled
Report Selection
Choose from the following options:
Arm Away
Arm Stay
Disarm
Exit Error
Recent Closing
Event Log Full
Trouble
Trouble Restore
Alarm Restore
Alarm Cancel
Test
Test Restore
Arm Away
Enabled
Arm Away
Disabled
Enabled
Arm Stay
Enabled
Arm Stay
Disabled
Enabled
Disarm
Enabled
Disarm
Disabled
- 11 -
Bypass
AC Loss
Low Battery
RF Low Battery
Bypass Restore
AC Loss Restore
Low Battery Restore
RF Low Battery Restor
Screen Display
Function & Programming Options
Enabled
Exit Error
Enabled
Exit Error
Always Enabled (not selectable)
Recent Closing
Enabled
Recent Closing
Always Enabled (not selectable)
Event Log Full
Enabled
Event Log Full
Disabled
Enabled
Trouble
Enabled
Trouble Restore
Enabled
Trouble
Disabled
Enabled
Trouble Restore
Disabled
Enabled
Alarm Restore
Enabled
Alarm Restore
Disabled
Enabled
Alarm Cancel
Enabled
Alarm Cancel
Disabled
Enabled
Test
Enabled
Test
Always Enabled (not selectable)
Test Restore
Enabled
Test Restore
Always Enabled (not selectable)
Bypass
Enabled
Bypass Restore
Enabled
AC Loss
Enabled
AC Loss Restore
Enabled
Bypass
Disabled
Enabled
Bypass Restore
Disabled
Enabled
AC Loss
Disabled
Enabled
AC loss Restore
Disabled
Enabled
Low Battery
Enabled
Low Battery Restore
Disabled
Enabled
Low Battery Restore
Enabled
Low Battery Restore
Disabled
Enabled
RF Low Battery
Enabled
RF Low Battery Restore
Enabled
Options
RF Low Battery
Disabled
Enabled
RF Low Battery Restore
Disabled
Enabled
Options
Choose from the following options:
PBX
Call Wait Cancel
Number of Reports
Alarm Report Delay
First Report Offset
Report Frequency
- 12 -
Screen Display
PBX
Call Wait Cancel
Function & Programming Options
PBX
Enter PBX Prefix
Call Wait Cancel
Enter Call Wait Cancel Prefix
Number of Reports
2 Reports
Number of Reports
1 Report
2 Reports
3 Reports
4 Reports
5 Reports
6 Reports
Alarm Report Delay
30 Sec.
Alarm Report Delay
15 Sec.
30 Sec.
45 Sec.
No delay
First Report Offset
6 Hrs
First Report Offset
6 Hrs
12 Hrs
18 Hrs
24 Hrs
Report Frequency
Never
Report Frequency
Never
Every Day
Every 7 Days
Every 30 Days
Downloader
Downloader
Choose from the following options:
Phone Answer
Modem Speed
Ans. Machine Defeat
Callback Number
Ring Counter
Flexible Callback
Number
Phone Answer
Yes
Phone Answer
Yes
No
Modem Speed
Slow
Modem Speed
(Future Use)
Ans. Machine Defeat
Yes
Callback Number
Ring Counter
2
Flexible Callback
No
Number
Answering Machine Defeat
Yes
No
Callback Number
Enter a Callback Number
Ring Counter (displayed if Ans. Machine Defeat is set to “No”)
Enter ring counter (1-14)
Flexible Callback
Yes
No
Number (displayed if Flexible Callback is set to “Yes”)
Enter the number of flexible callbacks that will be used (1-3)
- 13 -
Screen Display
Function & Programming Options
Program Sounder
Sounder
Sounder
Choose from the following options:
Burglary Alarm Sound
Burglary Bell Timeout
Fire Bell Timeout
Arm Confirm
Alarm Options
Burglary Alarm Sound
Yes
Burglary Alarm Sound
Burglary Bell Timeout
4 Minutes
Burglary Bell Timeout
Fire Bell Timeout
4 Minutes
Arm Confirm
None
Yes
No
No
4 Minutes
8 Minutes
12 Minutes
16 Minutes
Fire Bell Timeout
No
4 Minutes
8 Minutes
12 Minutes
16 Minutes
Arm Confirm
None
All RF
RF Key Fob
RF Keypad
Program System Settings
System Settings
Entry Delay 1
30 Seconds
Entry Delay 2
30 Seconds
System Settings
Choose from the following options:
Entry Delay 1
Entry Delay 1
Exit Delay
Backlight Timeout
Quick Arm
Quick Exit
Restart Exit Time
Force Bypass Exit Warning
Auto Stay Arming
Lack of Usage Notify
Power-up in Previous
Display Alarm Cancel
Display Exit Time
Cross Zone Delay
Cross Zone 1
Cross Zone 2
Entry Delay 1
None
15 Seconds
30 Seconds
45 Seconds
60Seconds
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Entry Delay 2
None
15 Seconds
30 Seconds
45 Seconds
60Seconds
90 Seconds
2 Minutes
3 Minutes
4 Minutes
- 14 -
Screen Display
Exit Delay
60 Seconds
Backlight Timeout
No
Function & Programming Options
Exit Delay
45 Seconds
60 Seconds
90 Seconds
2 Minutes
Backlight Timeout
No
30 Seconds
Quick Arm
Yes
Quick Arm
Quick Exit
Yes
Quick Exit
Restart Exit Time
Yes
Yes
No
Yes
No
Restart Exit Time
Yes
No
Force Bypass
No
Force Bypass
Exit Warning
Yes
Exit Warning
Auto Stay Arming
Yes
Yes
No
Always Enabled (not selectable)
Auto Stay Arming
Yes
No
Lack of Usage Notify
Disabled
Lack of Usage Notify
Power-Up in Previous
Yes
Power-Up in Previous State
Display Alarm Cancel
Yes
Display Alarm Cancel
Disabled
1 Day
7 Days
27 Days
90 Days
180 Days
365 Days
Always Enabled (not selectable)
Yes
No
Display Exit Time
Yes
Display Exit Time
Cross Zone Delay
None
Cross Zone Delay
Yes
No
None
30 Seconds
1 Minute
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Cross Zone 1
Disabled
Cross Zone 1
Cross Zone 2
Disabled
Cross Zone 2
Disabled
Disabled
- 15 -
Screen Display
Function & Programming Options
Program the Z-Wave Module
Z-Wave
Z - Wave
5100-100-067-V0
Z-Wave
Enabled-Installed Telephone
Temperature Display
Fahrenheit
Note: This procedure must be completed any time that the panel has been defaulted or
updated.
Z-Wave
Select from the following options:
Enabled – Installed Telephone Side
Disabled
Temperature Display
Select from the following options:
Fahrenheit
Celsius
- 16 -
Zone Programming Worksheet
Fill in the required data on this worksheet, then follow the programming procedure.
See Explanation of Zone Assignment Table Headings (defaults shown are for Configuration 1)
Zone
No.
1
Loop
No.
N/A
Device
Type
New
Response
Type
N/A
2
2
Door
Entry Exit 1
Yes
Yes
Supervised
Front
3
2
Door
Entry Exit 1
Yes
Yes
Supervised
Back
4
2
Window
Perimeter
Yes
Yes
Supervised
N/A
5
1
Motion Sensor
Interior w/Delay
Yes
No
Supervised
N/A
Report Chime
Yes
No
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
- 17 -
Supervision
End of Line
Transmitter
Serial Number
N/A
Zone
Descriptor
(HW Zone)
Zone Programming Worksheet
Zone
No.
45
Loop
No.
Device
Type
Response
Type
46
1
New
Not Used
No
Yes
Supervised
Main
47
1
New
Not Used
No
Yes
Supervised
Main
48
1
New
Not Used
No
Yes
Supervised
Main
49
3
4 Button (Key)
Arm Away
Yes
No
Button
N/A
Report Chime
Supervision
Transmitter
Serial Number
Zone
Descriptor
50
2
4 Button (Key)
Disarm
Yes
No
Button
N/A
51
4
4 Button (Key)
Arm Stay
Yes
No
Button
N/A
52
1
4 Button (Key)
No Response
No
No
Button
N/A
53
3
4 Button (Key)
Arm Away
Yes
No
Button
N/A
54
2
4 Button (Key)
Disarm
Yes
No
Button
N/A
55
4
4 Button (Key)
Arm Stay
Yes
No
Button
N/A
56
1
4 Button (Key)
No Response
No
No
Button
N/A
N/A
N/A
Temperature
Not used
Yes
No
High Temp
81
Temperature
Not used
Yes
No
Low Temp
N/A
N/A
82
N/A
Temperature
Not used
Yes
No
High Temp
N/A
83
N/A
Temperature
Not used
Yes
No
Low Temp
N/A
84
N/A
Temperature
Not used
Yes
No
High Temp
N/A
85
N/A
Temperature
Not used
Yes
No
Low Temp
N/A
92
N/A
N/A
Yes
No
Duress Trigger
95
N/A
N/A
Fire
Fire No Verif.
Yes
No
Panic Trigger
96
N/A
Medical
Not Used
Yes
No
Panic Trigger
99
N/A
Police
24 Hour Silent
Yes
No
Panic Trigger
57
58
59
60
61
62
63
64
80
N/A
Explanation of Zone Assignment Table Headings
Loop Number - Used with 5800 Devices. Record transmitter loop number. Entries are 1-4, depending on device being used. Refer to the
transmitter’s instructions or the figure provided for appropriate loop numbers.
Device Type- Dependant upon the Zone Number being programmed.
Door
Smoke Detector
Window
Heat Sensor
Motion Sensor
Carbon Mono. Det.
Glass Break
Temperature
Flood
Environmental
Medical
Police
Fire
Garage Door
Other
Response Type - Dependant upon the Device Type that has been selected.
Entry Exit 1
24 Hour Audible
Trouble
Entry Exit 2
24 Hour Auxiliary
Arm Stay
Perimeter
Fire No Verification
Arm Away
Interior Follower
Interior with Delay
Disarm
Day/Night
Monitor
No Response
24 Hour Silent
Carbon Monoxide
Silent Burglary
Garage Monitor
Resident Monitor
Resident Response
General Monitor
General Response
Fire With Verification
Garage
Supervision - Dependant upon the Zone Number being programmed.
Hardwire Zone (Zone 1)
Wireless Zone (Zone 2-48, 80-85)
End of Line (Resistor)
Supervised
Normal-Closed
Unsupervised
Normal-Open
Temperature (Zone 80-85)
High Temp
Low Temp
- 18 -
Key (Zone 49-64)
Button
5800 Series Transmitter Loop Numbers
LOOP
1
LOOP 1
LOOP
1
LOOP 1
(LOW
SENSITIVITY
LOOP 1
(LOW
SENSITIVITY
LOOP 2
(HIGH
SENSITIVITY)
LOOP 2
(HIGH
SENSITIVITY)
LOOP 3 (TEMP)
LOOP 3 (TEMP)
LOOP 4 (TAMPER)
LOOP 4 (TAMPER)
5800CO
ENROLL AS "RF"
5800Micra
ENROLL AS "RF"
5800PIR-RES
ENROLL AS "RF"
5800PIR/
5800PIR-COM
ENROLL AS "RF"
5800RL
SET
HOUSE ID
5800PIR-OD
ENROLL AS "RF"
LOOP 3
ON
LOOP 4
LOOP
1
5800SS1
E N RO L L A S " R F "
5 8 0 0 WAV E
P RO G R A M
HOUSE ID
SERIAL #1
LOOP 3
ON
LOOP 4
LOOP 1
LOOP
3
5804/5804E
ENROLL AS "BR"
5802MN2
ENROLL AS
"UR" OR "RF"
5802MN
ENROLL AS
"UR" OR "RF"
•
•• •••
••• • •
• ••
F
LOOP 1
5 8 0 4 B D / 5 8 0 4 B DV
ENROLL AS "BR"
PROGRAM HOUSE ID
LOOP 2
(REED)
SERIAL #1
LOOP 2
OF
1
LOOP 2
LOOP 2
LOOP 1
2
SERIAL #1
LOOP 1
3
SERIAL #2
LOOP 3
4
LOOP 1
LOOP 1
LOOP 1
SERIAL #2
LOOP 2
LOOP 1
(TERMINALS)
LOOP 1
SERIAL #2 - LOOP 1 = ON + 4 BUTTONS
LOOP 4 = 3 + 4 BUTTONS
5805-6
ENROLL AS "BR"
5806/5806W3/5807
5808/5808LST/5808W3
ENROLL AS "RF"
5809
ENROLL AS "RF"
LOOP 1
(PRIMARY)
LOOP 2
(REED)
LOOP 2
(REED)
LOOP 2
(AUX.
CENTER)
LOOP 1
(TERMINALS)
ALTERNATE
POSITION
FOR LOOP 2
5816MN
ENROLL AS "RF"
LOOP 3
(AUX.
RIGHT)
5818
ENROLL AS "RF"
5817
ENROLL AS "RF"
5816TEMP
ENROLL AS "RF"
5816
ENROLL AS "RF"
LOOP 2
(REED)
LOOP 3
(TERMINALS)
LOOP 1
LOOP 1
(TEMP
SENSOR)
5814
ENROLL
AS "RF"
5811
ENROLL AS "RF"
LOOP 3
(TERMINALS)
LOOP 1
LOOP 1
(INTERNAL
SHOCK
SENSOR
5819S (WHS & BRS)
ENROLL AS "RF"
LOOP 1
(TERMINALS)
5819
ENROLL AS "RF"
5820L
ENROLL AS "RF"
SERIAL #2
LOOP 1
SERIAL #1
LOOP 3
SERIAL #1
LOOP 2
AR
ME
SERIAL #2
LOOP 3
D
RE
AD
Y
MIC
ME
LOOPS
1-3
E
LOOP 1
SERIAL #1
LOOP 4
5821
ENROLL AS "RF"
5828/5828V
P RO G R A M
HOUSE ID
5822T
ENROLL AS "RF"
AW
AY
ST
AY
SERIAL #2
LOOP 2
5834-4
ENROLL AS "BR"
LOOP 3 (TILT MODE)
3
4
LOOP 4 (TAMPER)
5870API
ENROLL AS "RF"
5853
ENROLL AS "RF"
LOOP 1
(LOW SENSITIVITY)
SERIAL #1
LOOP 2
1
2
SERIAL #2
LOOP 3
LOOP 2
(STANDARD
SECURITY)
SERIAL #1
LOOP 1
LOOP 1
(MOTION)
SERIAL #1
LOOP 3
SERIAL #1
LOOP 4
LOOP 1
(HIGH
SECURITY)
SERIAL #2
LOOP 4
SSAG
LOOP 3
LOOP 1
SERIAL #1
LOOP 1
LOOP 1
LOOP 2
(HIGH SENSITIVITY)
SERIAL #2
LOOP 2
5877
5878
ENROLL AS "BR"
5890/5890PI
ENROLL AS "RF"
5894PI
ENROLL AS "RF"
5897
ENROLL AS "RF"
5898
ENROLL AS "RF"
5800-002-V1
SERIAL #1
LOOP 4
LOOP 1
F
••
•
••
LOOP
1
OF
Notes: (1) The 5806W3 smoke detector must be used in SIA applications.
(2) Button type (BR) devices send only fault and low battery signals; no restore or check-in signals.
Supervised RF (RF) devices send periodic check-in signals, faults, restore and low battery signals.
Unsupervised RF (UR) devices send periodic check-in signals, faults, restore and low battery signals but the
control does not supervise the check-in signals.
(3) If an external sounder is required, the 5800WAVE should be used.
(4) The 5804E and 5834-4 encrypted (High-Security) devices must be activated while the system is in Go/No-Go
Test Mode. Refer to the transmitter’s Installation Instruction for complete details. The system will confirm the
enrollment of the encrypted device by beeping two times
UL
The 5800RL, 5802MN, 5802MN2, 5804, 5804BD, 5804BDV, 5814, 5816TEMP, 5819, 5819S(WHS & BRS), and
5828/5828V wireless transmitters have not been evaluated by UL.
- 19 -
Programming Default Values
Program Function
Installer Code
System Type
RF Jam
Speaker Phone
Two Way Voice
RF House Code
Phone Notification
Remote Phone
Phone Detect Time
Events - Log All
Events - Log Alarm
Events - Log Bypass
Events - Log Open/Close
Events - Log Trouble
Non Security
Remote Access Serial
Multi Mode Serial
Date Time
Calendar
Enter Time
Time Zone
Day Light Savings time
Start Month
Start Week
End Month
End Week
Communicator
Communications Path
APL
City ID
CS ID
Sub ID
Supervision
Old Alarm Time
Remote Acc. Comm.
Multi Mode Comm.
GSM Fault Time
IP Fault Time
Use DHCP
NI IP Address
Subnet Mask
Gateway IP Address
DNS Server IP Address
Zones
Reporter
Primary CS Info
Phone Type
Communicator Type
Phone Number
Account Number
Dynamic Priority
Dynamic Delay
Report All
Report Alarms
Report Troubles
Report Open/Close
Report Tests
Secondary CS Info
Phone Type
Communicator Type
Phone Number
Account Number
Dynamic Priority
Dynamic Delay
Report All
Report Alarms
Report Troubles
Report Open/Close
Report Tests
Configuration 1
4112
Configuration 2
4112
Configuration 3
4112
Configuration 4
4112
Disabled
Enabled
Disabled
0
Disabled
Enabled
2 Minutes
Press To Log All
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
0
Disabled
Enabled
2 Minutes
Log All Set
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Enabled
Disabled
0
Disabled
Enabled
2 Minutes
Press to Log All
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
0
Disabled
Enabled
2 Minutes
Press to Log All
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
January 1, 2011
10:00AM
Eastern (EST)
Yes
March
Second
November
First
January 1, 2011
10:00AM
Eastern (EST)
Yes
March
Second
November
First
January 1, 2011
10:00AM
Eastern (EST)
Yes
March
Second
November
First
January 1, 2011
10:00AM
Eastern (EST)
Yes
March
Second
November
First
None
Disabled
None
None
None
24 Hours
10 Minutes
Disabled
Disabled
00
00
Yes
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
None
None
Disabled
Disabled
None
None
None
None
None
None
24 Hours
24 Hours
10 Minutes
10 Minutes
Disabled
Disabled
Disabled
Disabled
00
00
00
00
Yes
Yes
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
See Zone Programming Default Configurations
None
Disabled
None
None
None
24 Hours
10 Minutes
Disabled
Disabled
00
00
Yes
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Contact Id: 4 Digit
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
Contact Id: 4 Digit
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
Contact Id: 4 Digit
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
Contact Id: 4 Digit
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
None
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
None
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
None
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
None
None
Blank
FFFF
None
None
Press to Report All
Enabled
Enabled
Disabled
Enabled
- 20 -
Program Function
Follow Me Phone 1
Phone Type
Phone Number
Report All
Report Alarms
Report Troubles
Report Open/Close
Report Tests
Follow Me Phone 2
Phone Type
Phone Number
Report All
Report Alarms
Report Troubles
Report Open/Close
Report Tests
Report Selection
Arm Away
Arm Stay
Disarm
Exit Error
Recent Closing
Event Log Full
Trouble
Trouble Restore
Alarm Restore
Alarm Cancel
Test
Test Restore
Bypass
Bypass Restore
AC Loss
AC Loss Restore
Low Battery
Low Battery Restore
RF Low Battery
RF Low Battery Restore
Options
PBX
Call Wait Cancel
Abort Window
Alarm Report Delay
First Report Offset
Report Frequency
Downloader
Phone Answer
Ans. Machine Defeat
Modem Speed (Future Use)
Ring Counter
Callback Number
Flexible Callback
Number
Sounder
Burglary Alarm Sound
Burglary Bell Timeout
Fire Bell Timeout
Arm Confirm
System Settings
Entry Delay 1
Entry Delay 2
Exit Delay
Backlight Timeout
Quick Arm
Quick Exit
Restart Exit Time
Force Bypass
Exit Warning
Auto Stay Arming
Lack Of Usage Notify
Power-Up In Previous
Configuration 1
Configuration 2
Configuration 3
Configuration 4
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
None
Blank
Press To Report All
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Blank
Blank
2 Reports
30 Seconds
6 Hrs
Never
Blank
Blank
2 Reports
30 Seconds
12 Hrs
30 Days
Blank
Blank
2 Reports
30 Seconds
12 Hrs
Never
Blank
Blank
2 Reports
30 Seconds
12 Hrs
Never
Yes
Yes
Slow
2
Blank
No
1
Yes
Yes
Slow
2
Blank
No
1
Yes
Yes
Slow
2
Blank
No
1
Yes
Yes
Slow
2
Blank
No
1
Yes
4 Minutes
4 Minutes
None
Yes
4 Minutes
4 Minutes
None
Yes
4 Minutes
4 Minutes
None
Yes
4 Minutes
4 Minutes
None
30 Seconds
30 Seconds
60 Seconds
No
Yes
Yes
Yes
No
Yes
Yes
Disabled
Yes
30 Seconds
30 Seconds
60 Seconds
No
Yes
Yes
Yes
No
Yes
Yes
Disabled
Yes
30 Seconds
30 Seconds
60 Seconds
No
Yes
Yes
Yes
No
Yes
Yes
Disabled
Yes
30 Seconds
30 Seconds
60 Seconds
No
Yes
Yes
Yes
No
Yes
Yes
Disabled
Yes
- 21 -
Program Function
Display Alarm Cancel
Display Exit Time
Cross Zone Delay
Cross Zone 1
Cross Zone 2
Z-Wave
Z-Wave
Temperature
Configuration 1
Yes
Yes
None
Disabled
Disabled
Configuration 2
Yes
Yes
None
Disabled
Disabled
Configuration 3
Yes
Yes
None
Disabled
Disabled
Configuration 4
Yes
Yes
None
Disabled
Disabled
Enabled
Fahrenheit
Enabled
Fahrenheit
Enabled
Fahrenheit
Enabled
Fahrenheit
- 22 -
-23-
EDGE
CONNECTOR
(L5100ZWAVE)
PHONE
REPLACE EVERY FOUR YEARS
P/N 300-03864-1/LYNXRCHKIT-SC
P/N 300-03866/LYNXRCHKIT-SHA
THE LYNX TOUCH CONTROLS ARE COMPATIBLE WITH THE
FOLLOWING INTEGRAL RECHARGEABLE BATTERY PACKS:
SUPER HIGH CAPACITY
BATTERY CONNECTOR
EGND
EARTH GROUND
STANDARD CAPACITY
BATTERY CONNECTOR
ZONES
2K
OHM
EOLR
HARD
WIRED
ZONE
WEEKLY TESTING IS REQUIRED TO ENSURE
PROPER OPERATION OF THIS SYSTEM
TAMPER
SWITCH
GSMVLP5-4G/GSMVLP5CN4G/
ILP5 RECEPTACLE
TELCO
JACK
INCOMING
PHONE LINE
IMPORTANT
WARNING
Be sure to observe
polarity when
connecting the
power supply to
the terminal strip.
02 - 48
ZT16
CIRCUIT
(ZONE)
30 seconds
CONTROL UNIT
DELAY-SEC
5806W3
5100-100-SOC-V1
10 seconds
SMOKE DETECTOR
MODEL
DELAY-SEC
THIS UNIT MAY BE PROGRAMMED TO INCLUDE AN ALARM
VERIFICATION FEATURE THAT WILL RESULT IN A DELAY OF THE
SYSTEM ALARM SIGNAL FROM THE INDICATED FIRE CIRCUITS.
THE TOTAL DELAY (CONTROL UNIT PLUS SMOKE DETECTORS)
SHALL NOT EXCEED 60 SECONDS. NO OTHER INITIATING
DEVICES SHALL BE CONNECTED TO THESE CIRCUITS UNLESS
APPROVED BY THE LOCAL AUTHORITY HAVING JURISDICTION.
EDGE
CONNECTOR
(L5100-WiFi)
POWER SUPPLY
CONNECTOR
300-04705 or 300-04065
(300-04063 CANADA)
POWER SUPPLY
9V, 2.7A
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
POWER
GND
LYNX TOUCH SERIES SUMMARY OF CONNECTIONS
RING
TIP
RING
TIP
TIP
COMPLIES WITH FCC RULES, PART 68 FCC REGISTRATION
No. AC3AL05BL5000
RINGER EQUIVALENCE: 0.5B
UL INSTALLATIONS
THE MINIMUM WIRE
SIZE USED FOR
TELEPHONE
INSTALLATIONS
MUST BE #26 GAGE
RING
PREMISES
TELEPHONE
H/S T
INCOMING
PHONE LINE
GND
NOTE: THE HARDWIRE ZONE CANNOT BEUSED AS A FIRE ZONE.
HWZ1
WARNING
TO PREVENT RISK OF
SHOCK, DISCONNECT
TELEPHONE LINE
AT TELECOM JACK
BEFORE SERVICING
THIS UNIT
H/S R
LYNX TOUCH SERIES ALSO COMPLIES WITH THE FOLLOWING:
CANADIAN STANDARDS ASSOCIATION (CSA) C22.1,
CANADIAN ELECTRICAL CODE, PART 1, SAFETY STANDARD
FOR ELECTRICAL INSTALLATIONS AND CAN/ULC-S540
INSTALLATION OF RESIDENTIAL FIRE WARNING SYSTEMS.
TRIGGER OUTPUT (NEG)
(3ma)
TRIG
THIS EQUIPMENT SHOULD BE INSTALLED IN ACCORDANCE WITH THE NATIONAL FIRE
PROTECTION ASSOCIATION STANDARDS ANSI/NFPA 70 NATONAL ELECTRIC CODE AND
NFPA 72 NATIONAL FIRE ALARM CODE, CHAPTER 2 (NATIONAL FIRE PROTECTION
ASSOC., BATTERY MARCH PARK, QUINCY, MA 02169). PRINTED INFORMATION
ESCRIBING PROPER INSTALLATION, EVACUATION PLANNING AND REPAIR SERVICE IS TO
BE PROVIDED WITH THIS EQUIPMENT.
+9VDC
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright © 2012 Honeywell International Inc.
www.honeywell.com/security
Ê800-13468Š
800-13468 12/12 Rev. A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising