Hakko Catalogue - Hakko Products

Hakko Catalogue - Hakko Products
HEAD OFFICE
4-5, SHIOKUSA 2-CHOME, NANIWA-KU, OSAKA, 556-0024 JAPAN
TEL:+81-6-6561-3225 FAX:+81-6-6561-8466
http://www.hakko.com E-mail:sales@hakko.com
OVERSEAS AFFILIATES
U.S.A.
AMERICAN HAKKO PRODUCTS, INC.
28920 N. AVE. WILLIAMS VALENCIA, CA 91355, U.S.A.
TEL: (661) 294-0090 FAX: (661) 294-0096
Toll Free (800)88-HAKKO
4 2 5 5 6
http://www.hakkousa.com
HONG KONG
HAKKO DEVELOPMENT CO., LTD.
ROOM 1504, EASTERN HARBOUR CENTRE,
28 HOI CHAK STREET, QUARRY BAY, HONG KONG.
TEL: 2811-5588 FAX: 2590-0217
http://www.hakko.com.hk
E-mail:info@hakko.com.hk
Please access to the following address for the other Sales affiliates.
http://www.hakko.com
Specifications and design are subject to change without notice.
Copyright HAKKO Corporation. All right reserved.
CA00291BbBa001 Mar. 2008
SINGAPORE
HAKKO PRODUCTS PTE., LTD.
1, GENTING LINK #02-04, PERFECT INDUSTRIAL
BUILDING, SINGAPORE 349518
TEL: 6748-2277 FAX: 6744-0033
http://www.hakko.com.sg
E-mail:sales@hakko.com.sg
Not only has Hakko been approved by ISO
9001 & 14001, but we are also conducting
our own campaigns. We are involved in
improving quality through 3 ‘‘friendlies.’’
‘‘Hakko is friendly to customers’’
We always strive to take on the perspective of our customers and think outside the normal frameworks to deliver products that amaze and excite customers.
‘‘Hakko is friendly to society’’
We take the environment into careful consideration when
creating the products so that people and nature co-exist.
In addition, each individual carries out activities that arevaluable to the society.
‘‘Hakko employees are friendly to each other’’
Teamwork is very important in order to deliver the products that excite the customers. Creative power stems
from the relations among the employees as well as between the Hakko international groups.
Hakko, as a specialized manufacturer
of soldering irons, has established the
Green Project.
We promote the development of products that are friendly to the environment (e.g., conforming to the EU RoHS
directives, etc.), starting with products compatible with
lead-free soldering.
We rapidly respond to the latest needs of our customers.
Our lineup of products, including new products designed
in Blue & Yellow and products compatible with lead-free
soldering (e.g., soldering irons for various purposes,
desoldering stations, etc.), could only be offered by a
specialized manufacturer like Hakko.
Furthermore, our Green Project not only eliminates the
hazardous materials from the products, but also aims to
expand our activities so that our business is friendly to
the people and the society. Hakko is always moving forward with our eyes on the future to deliver products that
excite customers throughout the world.
Our company has been certified under ISO 9001 (JIS Q 9001), the international
quality system standards. We are also certified under ISO 14001 (JIS Q 14001)
and are actively involved in preserving the global environment.
Products List
P.18~21
Thermometer, Soldering Tester Soldering Pot
P.40~41
Smoke Absorber / Static Control
P.28~33
Soldering System
Tip Polisher, Chemical Paste Iron Holder
P.42
P.43~44
Preheater
P.56
SMD Desoldering
Repair System
Rework System
P.60
P.61
Smoke Cleaner
Smoke Absorber
Static Eliminator
Wrist Strap
P.69
P.70
69
10
HAKKO MODEL FM-2024
46
HAKKO MELTER
70
HAKKO FX-951
10
HAKKO 474
48
HAKKO FM-203
14
HAKKO 475
48
HAKKO FX-950
HAKKO MODEL FM-2022
14
HAKKO 815
49
Solder Reel Stand
HAKKO MODEL FM-2023
14
HAKKO 816
49
HAKKO MODEL FM-2024
14
HAKKO 484
50
HAKKO FX-780
19
HAKKO 808
50
HAKKO FX-791
19
HAKKO SPPON
51
HAKKO FM-2026
19
HAKKO WICK
51
HAKKO FX-8302
19
HAKKO FR-801
52
HAKKO CUTTING TOOL
71
HAKKO FX-838
22
HAKKO FR-802
52
HAKKO 392
72
HAKKO 937
24
HAKKO FR-803B
52
HAKKO 394
73
HAKKO 928
26
HAKKO FR-830
56
HAKKO 153
74
HAKKO 951
27
Nozzle Tray
56
HAKKO 154
74
HAKKO 952
27
Omnivise
56
HAKKO 155
74
HAKKO 933
28
Rework Fixture
56
HAKKO 152B
75
HAKKO 934
28
HAKKO 851
57
HAKKO DIPLINER
75
HAKKO MACH-I
29
HAKKO MODEL FM-2022
58
HAKKO DASH
30
HAKKO MODEL FM-2023
58
HAKKO 455
31
HAKKO 950
59
HAKKO 456
31
HAKKO MACH-FP
59
HAKKO PRESTO
32
HAKKO 701
60
HAKKO RED
33
HAKKO 702B
61
HAKKO FX-901
33
HAKKO MG
34
HAKKO 958
35
HAKKO 959
35
HAKKO 373
36
HAKKO 375
37
HAKKO FG-100
38
HAKKO FG-101
38
HAKKO FX-301B
40
Smoke Absorber/
Static Control
HAKKO FX-300
40
HAKKO 490
62
HAKKO 96
41
HAKKO FA-400
63
HAKKO 485
42
HAKKO 494
64
HAKKO FT-710
43
HAKKO FE-500
65
HAKKO FT-700
44
HAKKO FG-450
66
HAKKO FS-100
44
HAKKO 442B
67
IRON HOLDER
45
HAKKO 496
67
HAKKO 611
45
HAKKO 498
68
P.45
System Tester
P.68
Cutting Tool
Vacuum Pick-up
Lead Former/Lead Cutter
Other Tools
P.74~75
Helps you lead-free solder application.
4
HAKKO HEATING GUN
49
P.67
P.72~73
46
6
HAKKO 809
P.66
P.71
HAKKO FM-204
HAKKO FX-888
14
Other Tools
Melter
P.65
Static Level Meter
Heating Gun /
Glue Gun
HAKKO FM-2027
P.56
P.58~59
Heating Gun
P.45
Desoldering /
Rework
P.36~37
SMD-BGA Repair System
P.52~55, P.57
P.63~64
P.33
Soldering
Other Tools
Heating Gun / Glue Gun
P.27, P.34~35
P.46~51
P.62
Cordless Soldering Iron Self Feeder
Heating Gun / Glue Gun
Desoldering / Rework
Desoldering Station, Desoldering Tool SMD Rework Station
Soldering Iron
Smoke Absorber / Static Control
P.38~39
Soldering Gun
Desoldering / Rework
P.6~17, P.22~26
N2 System
Soldering
Soldering
Soldering Station
INDEX
ESD safe by design.
5
Products List
P.18~21
Thermometer, Soldering Tester Soldering Pot
P.40~41
Smoke Absorber / Static Control
P.28~33
Soldering System
Tip Polisher, Chemical Paste Iron Holder
P.42
P.43~44
Preheater
P.56
SMD Desoldering
Repair System
Rework System
P.60
P.61
Smoke Cleaner
Smoke Absorber
Static Eliminator
Wrist Strap
P.69
P.70
69
10
HAKKO MODEL FM-2024
46
HAKKO MELTER
70
HAKKO FX-951
10
HAKKO 474
48
HAKKO FM-203
14
HAKKO 475
48
HAKKO FX-950
HAKKO MODEL FM-2022
14
HAKKO 815
49
Solder Reel Stand
HAKKO MODEL FM-2023
14
HAKKO 816
49
HAKKO MODEL FM-2024
14
HAKKO 484
50
HAKKO FX-780
19
HAKKO 808
50
HAKKO FX-791
19
HAKKO SPPON
51
HAKKO FM-2026
19
HAKKO WICK
51
HAKKO FX-8302
19
HAKKO FR-801
52
HAKKO CUTTING TOOL
71
HAKKO FX-838
22
HAKKO FR-802
52
HAKKO 392
72
HAKKO 937
24
HAKKO FR-803B
52
HAKKO 394
73
HAKKO 928
26
HAKKO FR-830
56
HAKKO 153
74
HAKKO 951
27
Nozzle Tray
56
HAKKO 154
74
HAKKO 952
27
Omnivise
56
HAKKO 155
74
HAKKO 933
28
Rework Fixture
56
HAKKO 152B
75
HAKKO 934
28
HAKKO 851
57
HAKKO DIPLINER
75
HAKKO MACH-I
29
HAKKO MODEL FM-2022
58
HAKKO DASH
30
HAKKO MODEL FM-2023
58
HAKKO 455
31
HAKKO 950
59
HAKKO 456
31
HAKKO MACH-FP
59
HAKKO PRESTO
32
HAKKO 701
60
HAKKO RED
33
HAKKO 702B
61
HAKKO FX-901
33
HAKKO MG
34
HAKKO 958
35
HAKKO 959
35
HAKKO 373
36
HAKKO 375
37
HAKKO FG-100
38
HAKKO FG-101
38
HAKKO FX-301B
40
Smoke Absorber/
Static Control
HAKKO FX-300
40
HAKKO 490
62
HAKKO 96
41
HAKKO FA-400
63
HAKKO 485
42
HAKKO 494
64
HAKKO FT-710
43
HAKKO FE-500
65
HAKKO FT-700
44
HAKKO FG-450
66
HAKKO FS-100
44
HAKKO 442B
67
IRON HOLDER
45
HAKKO 496
67
HAKKO 611
45
HAKKO 498
68
P.45
System Tester
P.68
Cutting Tool
Vacuum Pick-up
Lead Former/Lead Cutter
Other Tools
P.74~75
Helps you lead-free solder application.
4
HAKKO HEATING GUN
49
P.67
P.72~73
46
6
HAKKO 809
P.66
P.71
HAKKO FM-204
HAKKO FX-888
14
Other Tools
Melter
P.65
Static Level Meter
Heating Gun /
Glue Gun
HAKKO FM-2027
P.56
P.58~59
Heating Gun
P.45
Desoldering /
Rework
P.36~37
SMD-BGA Repair System
P.52~55, P.57
P.63~64
P.33
Soldering
Other Tools
Heating Gun / Glue Gun
P.27, P.34~35
P.46~51
P.62
Cordless Soldering Iron Self Feeder
Heating Gun / Glue Gun
Desoldering / Rework
Desoldering Station, Desoldering Tool SMD Rework Station
Soldering Iron
Smoke Absorber / Static Control
P.38~39
Soldering Gun
Desoldering / Rework
P.6~17, P.22~26
N2 System
Soldering
Soldering
Soldering Station
INDEX
ESD safe by design.
5
Soldering Station
Desoldering / Rework
Protective cap
Cleaning sponge
A protective cap installed
in the iron receptacle is
provided to reduce sounds when storing the iron.
Residual solder and flux
adhering on the tip can be
wiped off by the sponge
soaked with water.
Easy trashing of solder waste
Heating Gun / Glue Gun
HAKKO FX-888 performance comparison graph
with conventional station
Thermal recovery graph
HAKKO FX-888
HAKKO 936
400
350
350
300
Tip
Point 1
Temp.(°C)
400
HAKKO FX-888
HAKKO936
28.5 sec.
Other Tools
150
100
100
50
Specifications
200
Packing List
Contents
Model No.
FX-888
Power Consumption
70W
Station ·································································1
Temperature Range
200-480°C
Iron (FX-8801) ·····················································1
Temperature Stability
± 1°C
Temperature Setting Lock Type
Dial screw type
50
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400
Time (sec.)
Test criteria
Board: Paper phenol copper
Solder: ø1.6 x 5mm Cycle: Every 3 sec.
Lead-free solder is used.
Downsized to save space
0
20
40
60
80
100
120
140
160
180
Time (sec.)
Test criteria
Board: Paper phenol copper
Solder: ø1.6 x 5mm Cycle: Every 3 sec.
Lead-free solder is used.
The calibretion (CAL) screwdriver is included as a standard accessory
The calibration (CAL) screwdriver (resin) is stored in the
bottom of station as a standard accessory. This enables
temperature compensation to be adjusted easily and reduces the possibility of damage to the calibration volume.
Voltage
26V
Dimensions
100(W) x 120(H) x 130(D)mm
Weight (w/o cord)
1.3kg
Model No.
FX-8801
Power Consumption
65W (26V)
Tip to Ground Resistance
< 2Ω
Tip to Ground Potential
< 2mV
Cord
1.2m
Weight (w/o cord)
44g
Replacement Tips
Please refer to page 8.
Iron holder with rubber cleaner
and cleaning sponge (No.FH800-01BY) ·············1
Cleaning wire ·······················································1
Total Length (w/o cord) 190mm
Comparison ln size between FX-888 and HAKKO 936.
HAKKO FX-888
Station
Iron
The new FX-888 realizes space savings of approx. 50%
in mounting area in comparison with conventional stations. It enables working space to be secured, which is important factor with the introduction of cell production.
6
Model Name
Other Tools
Approx. 20 sec.
36.4 sec.
250
150
0
Point 4
Point 5
300
Approx. 20°C
250
200
Point 2
Point 3
Cleaning wire
Residual solder and flux
adhering on the tip is removed by inserting the tip
into a thin metallic wire.
This cleaning wire leaves
an appropriate amount of
solder on the tip end, which prevents the tip from
being oxidized. Use without water prevents the
tip temperature from decreasing rapidly or tip oxidation from being promoted.
Heating Gun / Glue Gun
Output has been increased by 30% compared to that of the HAKKO 936. The conventional tip design was reviewed and
the shape was improved to provide more efficient heat transfer from the heating element. As a result, the thermal recovery time to 350°C is 20 seconds faster, and the drop in tip temperature durind continuous work is reduced (refer to the
thermal recovery graph), enabling the time for performing the same work to be shortened (refer to the graph showing
performance comparison) and work efficiency to be greatly increased.
Temp.(°C)
The iron holder base is
provided with a detachable
waste collecting plate,
which improves its maintainability.
Residual solder and flux
adhering on the tip can be
wiped off on the silicone
rubber cleaner. Use without water prevents the tip
temperature from decreasing rapidly or tip oxidation from being promoted.
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Rubber cleaner
Heater output increased to 65W
Desoldering / Rework
Heater output increased to 65W.
Excellent thermal recovery.
The calibration (CAL) screwdriver is included
as a standard accessory.
3 types of cleaning methods available in one
soldering iron holder.
Space-saving compact design.
Reduce sounds with storing the iron
3 types of cleaning methods available
in one soldering iron holder
Soldering
Soldering
Design improved for ease of use
Hexagon wrench ··················································1
CAL adjustment driver* ·······································1
*CAL adjustment driver is attached to the bottom of the station.
Replacement and Optional Parts
Part No.
Name/Description
FX8801-01
Soldering iron FX-8801/26V-65W
FH800-01BY
Iron holder FH-800/blue & yellow
A1559
Cleaning sponge
A1561
Cleaning wire
B3474
Rubber cleaner
A1560
Heating element/26V-65W
B3469
Tip enclosure
B1785
Nut
B2022
Nipple
B3466
CAL adjustment driver
7
Soldering Station
T18-C1
T18-I
T18-CF15
45°
14
ø1.5
ø5
2
°
60 13.5
ø2
0.
R
T18-D08
°
45 14.5
10
Tinned onthe soldering
surface only.
T18-D12
T18-CF3
14.5
ø3
45° 14.5
0.7
ø3
ø1.2
T18-C3
14.5
Other Tools
Other Tools
Tinned onthe soldering
surface only.
45°
0.6
ø2.5
ø2
ø0.8
T18-CSF25
°
45 13.5
Heating Gun / Glue Gun
45° 14.5
13.2
Heating Gun / Glue Gun
ø0.5
T18-C05
2
T18-C2
T18-CF2
13.5
Tinned onthe soldering
surface only.
Tinned on the soldering
surface only.
T18-SB
°
60
Smoke Absorber / Static Control
Smoke Absorber / Static Control
0.
2
T18-K
ø1
T18-CF1
14.5
Desoldering / Rework
Desoldering / Rework
14.5
R
°
60
13.5
R
0.
5
ø1
T18-B
Unit : mm
Soldering
Soldering
Optional Tips
45° 14.5
Tinned onthe soldering
surface only.
T18-D24
0.5
ø4
14.5
14.5
T18-D32
45° 14.5
14.5
0.5
ø4
ø3.2
T18-CF4
45° 14.5
0.5
ø2.4
T18-C4
ø1.6
T18-D16
Tinned onthe soldering
surface only.
8
9
Soldering Station
Digital type
Desoldering / Rework
Thermal setting lock
Analog
Digital
Lock key
Control card
Auto-power shutoff function
Power-save function
Sleep function
Fixed: 6min.
Low temperature alarm function
Packing List
Specifications
Model No.
FX-950
FX-951
Model Name
75W
Station ·································································1
Temperature Range
200-450°C
Iron (FM-2028) ····················································1
Temperature Stability
± 5°C
Power cord ··························································1
HAKKO FX-951
Station
Model No.
FX-950
80(W) x 118(H) x 138(D)mm
Control card ·························································1
Heat resistant pad ···············································1
80(W) x 130(H) x 131(D)mm
Station ·································································1
1.2kg
Weight (w/o cord)
Iron (FM-2028) ····················································1
Iron
Power cord ··························································1
Model No.
FM-2028
Power Consumption
70W (24V)
Tip to Ground Resistance
< 2Ω
Tip to Ground Potential
< 2mV
Cord
1.2m
Total Length (w/o cord)
188mm with 2.4D tip
Weight (w/o cord)
30g with 2.4D tip
Replacement Tips
Please refer to page 12-13.
HAKKO FX-950
Iron holder with cleaning sponge
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Iron holder with cleaning sponge
(No.FH200-02) ····················································1
FX-951
24V
Dimensions
(No.FH101-02) ····················································1
Lock key·······························································1
Heat resistant pad ···············································1
* Tips are optional parts.
Iron Holder
The unit can be used with
HAKKO 599B instead of a
cleaning sponge.
Other Tools
Other Tools
Contents
Power Consumption
Output Voltage
Analog type
Excellent thermal recovery
Suitable for various kinds of applications from
touch up to heavy duty application.
"Lock key" can lock the temperature settings.
Offset function
Space-saving compact design
Informing of various errors by lamp.
Arbitrary: 0 to 29 min.
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Analog/Digital type
FX-951
Desoldering / Rework
Excellent thermal recovery
Suitable for various kinds of applications from
touch up to heavy duty application.
Informs you of errors via a warning buzzer or display.
"Control Card" can lock the temperature settings.
Quick and easy offsetting of tip temperature by
the digital offset function.
Low temperature alarm function is provided.
Sleep function prevents the tip from being oxidized and extends the tip life.
Energy-saving automatic power shut-off function.
Space-saving compact design
Antibacterial color sleeve enables the tip replacement to be easier and more comfortable.
FX-950
Soldering
Soldering
Performance comparison table
Replacement and Optional Parts
Thermal Recovery Graph
Power-save Function (HAKKO FX-951)
HAKKO FX-951
HAKKO 937
Temp.(°C)
400
350
300
250
200
Test criteria
Board: Paper phenol copper
Solder: ø1.6 x 5mm Cycle: Every 3 sec.
Lead-free solder is used.
150
100
50
0
10
50
100
150
200
250
300
350
400
Time (sec.)
The power-save function operates
while being linked to the iron holder.
After the iron is inserted into the iron
holder, the sleep function*1 activates
for an arbitrarily-set time (0 to 29
min.) and the tip temperature will decrease to 200°C. After 30
minutes have elapsed, the
automatic power shutoff
function*2 activates.
*1 To use sleep function, it is necessary to set the desired time arbitrarily in
advance.
For using the sleep function with the FX-950, the FH200-01 or the FH
200-02 iron holder is required, which is sold as option. Then, the time
before activating the sleep function is fixed by 6 minutes and cannot be
changed.
*2 In order to use the automatic power shutoff function, it is necessary to
set it in advance.
The FX-950 is not equipped with the automatic power shutoff function.
Part No.
Name/Description
FM2028-01
HAKKO FM-2028 24V/70W w/yellow sleeve
FM2028-02
HAKKO FM-2028 24V/70W w/blue sleeve
For storage of tip
FH200-02
HAKKO FH-200 <cleaning sponge type>
FH101-02
HAKKO FH-101 <cleaning sponge type>
* Option
* Tips are not included.
B3253
Connecting cable
A1536
Cleaning sponge, green
599B-02
HAKKO 599B tip cleaner
B2756
Tip tray
B3216
Sleeve assembly, yellow
B3217
Sleeve assembly, orange
B3218
Sleeve assembly, blue
B3219
Sleeve assembly, green
Sleeve Assembly
Tip Tray
No. B2756
N2 System
Combination sample with the N2 system
HAKKO FX-951, HAKKO FM-2026,
HAKKO FX-780, HAKKO FX-791
* For further details, refer to page 18-21.
Four color sleeve assemblies are
available. Workability increases if
sleeves are changed according to
the tip shape and job application.
11
Soldering Station
Optional Tips
SMD TYPE
13.6
14.8
T12-B3
Shape-0.7B
T12-B4
R0
10
5.5
.7
R0
5
QUAD
.4
5
23.4
24.6
T12-1209
17.9
19
12.8
14
5.5
17.9
19
Quad 22.5 x 16.5
T12-1207
Quad 15.5 x 15.5
22.5
23.7
5.8
T12-1208
5.8
5.5
Quad 15.8 x 15.8
15.5
16.7
15.8
17
5
5.5
Quad 8.4 x 8.4
8.4
9.6
Shape-BL
T12-1206
17.3
18.5
Desoldering / Rework
T12-BL
.5
Quad 23.4 x 17.3
Quad 17.9 x 17.9
Desoldering / Rework
SHAPE
B
R0
7.5
10.3
11.5
Shape-0.4B
T12-1205
.2
R0
5.5
T12-1204
15.8
17
Shape-0.5B
Quad 12.8 x 12.8
15.5
16.7
T12-B2
T12-1203
16.5
17.7
Shape-B
Quad 10.3 x 10.3
12.8
14
139
T12-B
T12-1202
10.3
11.5
Quad 13.6 x 8.5
8.5
9.7
T12-1201
Soldering
Soldering
ø5.5
Unit : mm
8.4
9.6
.2
Shape-2BC
T12-BC3
T12-BCF3*
Shape-3BC
4.6
10.4
2.3
2.3
T12-C4
T12-CF4*
Shape-4C
13.2
0.5
3.5
10
T12-1402
4
10
Shape-0.8DL
T12-DL12
15.7
7.2
9.5
T12-1405
Spatula 32
0.6
3
13
T12-B2Z
T12-BC1Z
Shape-1BC (Z)
T12-BCF1Z*
Shape-2.4D (Z)
T12-D4Z
1.2
20.9
19.5
ø3
ø1.6
0.5
ø4
5
10
Shape-KF (Z)
T12-KRZ
Shape-KR (Z)
45°
2
17
45 °
12
Shape-KR
45°
11.5
1.5
45°
10
ø5.5
ø6.7
45°
11
139
T12-WD12 Shape-1.2WD
T12-WD16 Shape-1.6WD
ø1.6
T12-WD08 Shape-0.8WD
ø1.2
T12-WB2 Shape-0.5WB
T12-WD52 Shape-5.2WD
T12-WI Shape-WI
.2
11
0.5
3.5
0.5
11
* These tips are tinned on the soldering surface only.
** T12-BCM2 and T12-BCM3 are not available for sale or use in the U.S.A.
3
11
0.5
3.5
11
R0
45°
11
2.4
ø5.2
T12-KR
ø4.7
Shape-KL
4
T12-BCM3
Shape-3BC
Bevel with indent**
ø0.8
45°
11
4
ø2
0°
R0.23
T12-KL
1.5
17
T12-KFZ
10
T12-BCM2
Shape-2BC
Bevel with indent **
7.9
5
0.
R
12
0.5
6
2.
0. 1
9
45°
0.5
Shape-4D (Z)
10
ø4.7
Shape-KF
ø4.7
ø4.7
T12-KF
Shape-1.6D (Z)
Shape-0.2JS
1.6
9.3
T12-D16Z
ø3
T12-JS02
Shape-1.2D (Z)
ø4.7
T12-D24Z
2.
1
Shape-0.2JL
T12-D12Z
10
3.
3
T12-JL02
0°
R0.2 3
30°
R0.2
Shape-KU
10
10
13.5
ø2.4
12.7
4.
2
8
.1
R0
HEAVY DUTY TYPE
T12-KU
4 5°
45°
.2
5
2
0.
ø3
SHAPE
K
2.
3
Shape-4C (Z)
ø4.6
R
2.4
15
45°
10
5
3.
45°
T12-BC3Z
Shape-3BC (Z)
T12-BCF3Z*
ø1.2
T12-C4Z
T12-CF4Z*
Shape-B (Z)
8
1.
2
T12-BC2Z
Shape-2BC (Z)
T12-BCF2Z*
45°
10
1.
2
10
Shape-ILS
7.5
Shape-K
7.2
10.5
ø1
T12-ILS
0.5
T12-K
Spatula 40
40
ø4.1
Shape-IL
9.5
12
7.2
9.5
2
7.2
9.5
Shape-0.5B (Z)
9
T12-IL
3.5
SHAPE
J
25
7.2
9.5
SPECIAL APPLICATIONS TYPE
R0
Shape-0.2J
21.2
16
2
0.
T12-J02
Spatula 25
3
13
T12-BZ
R
7.2
9.5
T12-1406
T12-1404
ø1.2
0.6
Shape-5.2DL
1.2
Spatula 21.2
2
10.4
Shape-1.2DL
T12-1403
3.
3
7
10
Shape-I
SHAPE
I
Spatula 15.7
2
Spatula 10.4
ø2
T12-DL52
3
3
2
T12-DL08
7
8
10.2
6
T12-1401
.5
R0
0.5
T12-I
12
ø5.2
Shape-3.2DL
ø3.2
T12-DL32
1.2
5.5
Other Tools
4
8.5
3.2
Tunnel 19.5 x 12
6
32
0.5
Tunnel 19.5 x 10.2
4.3
Shape-2.4D
0.5
ø0.8
Shape-5.2D
ø4
SHAPE
D
Other Tools
T12-D52
ø5.2
Shape-4D
18.8
2.3
14.8
13.4
T12-D24
SPATULA
T12-D4
T12-1010
2
3
10
T12-1008
2
Shape-1.6D
ø2.4
T12-D16
ø1.6
0.5
3.2
9.5
Tunnel 7.9 x 18.8
4.5
Tunnel 13.4 x 20.5
45°
11.5
ø1.2
ø0.8
0.5
T12-1007
20.9
19.5
ø1
1
Shape-1.2D
5.5
6
T12-1009
60°
12
T12-D12
3.2
Heating Gun / Glue Gun
Shape-0.8D
11.4
3.2
20.5
T12-D08
Tunnel 6.9 x 11.4
5.5
ø4
Shape-1C
ø0.8
T12-C1
60°
12
0.8
SHAPE
C
Heating Gun / Glue Gun
Shape-0.8C
T12-1006
11.1
9.5
TUNNEL
T12-C08
15.8
9.3
7.9
Tunnel 9.5 x 13.2
10
Tunnel 9.5 x 15.8
5.5
8.7
6.9
3.
3
2.
1
T12-1005
45°
45°
11.5
T12-1004
3.2
ø3
ø2
ø1
1.
1
45°
11.5
Tunnel 9.5 x 18.3
18.3
4.5
4.5
SHAPE
BC
T12-1003
11.1
9.5
T12-BC2
T12-BCF2*
Tunnel 5.1 x 10.4
6.7
5.1
Shape-1BC
T12-1002
Smoke Absorber / Static Control
T12-BC1
T12-BCF1*
Tunnel 5.1 x 4.6
11.1
9.5
T12-1001
Smoke Absorber / Static Control
5.5
12
6.7
5.1
R0
1.2
7
11
10
13
Future Module
FM-2027 Conversion Kit (No.FM2027-03)
FM-2022 Conversion Kit (No.FM2022-04)
FM-2023 Conversion Kit (No.FM2023-04)
FM-2024 Conversion Kit
Soldering
Soldering
Conversion Kit
A single station plays multiple roles of soldering, desoldering and SMD rework.
Smoke Absorber / Static Control
Desoldering / Rework
Smoke Absorber / Static Control
Desoldering / Rework
Two connection ports:–
Two soldering irons can be connected at the same
time, which allows users to select and use the appropriate one without having to connect them alternatively.
Powerful thermal recovery
Sleep function
Auto power shutoff function
Soldering
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Light weight grip provides fatigueless work even for extended jobs.
New colored antibacterial sleeves can be replaced more easily than conventional ones.
Four colored sleeves are provided. Using color classification for tip shape enables convenient work.
SMD Rework
* The part number of ''Conversion kit'' varies from the input voltage.
Please contact with the nearest representative for the further information.
No. MODEL FM-2022
FM-2022:–
Can be used for chips and flat packages up to 25mm
in size.
Parallel movement
FM-2023:–
Standard or reverse tweezers action can be selected
with a switch lever.
Equipped with a small ergonomic grip.
Sleep function
Combination examples
After the iron is inserted into the iron holder, the sleep
function activates for a user-settable time (0 to 29
min.) and the tip temperature will decrease to approximately 200°C.
Since all handpieces cannot be connected to each
connector port, refer to the following table.
Other Tools
Other Tools
Unique parallel movement of tips allows easy removal.
Direct heating prevents damage to neighboring sensitive components comparing with hot air.
Auto power shutoff function
When 30 minutes have elapsed after inserting the iron
into the iron holder, the auto power shut-off function
activates and stops to apply power to the heating element.
No. MODEL FM-2023
Desoldering- external air compressor type
Small ergonomic style grip with light weight provides fatigueless work.
New design with reduced distance between the nozzle end and filter pipe pre
vents clogging by sucked solder.
Easy maintenance:–
Uses disposable paper filter pipes.
One-touch nozzle replacement.
Detachable handle allows two-way use: gun type or straight type
Safe design:–
Equipped with a nozzle lock function.
Nozzles can be safely replaced with the nozzle remover.
* Before using the FM-2024 unit, connect to a compressor.
14
* Desoldering Control Box (DCB) for
MODEL FM-2024
Handpiece
D
S
Channel D
connector
Channel S
connector
FM-2027
connecting cable
Connect the FM-203 station
and FH-200 iron holder using
a connecting cable.
* It is necessary to change unit settings before using sleep and auto power shut-off functions.
FM-2022
*1
FM-2023
*1
FM-2024
*2
FM-2026
*3
*1 If the FM-2022 or the FM-2023 handpiece is connected to the channel D connector
the other handpiece connected to the channel S connector can be used with it at
the same time. If either handpiece is used, the non-used handpiece will be automatically subject to sleep mode.
*2 If two FM-2024 handpieces are connected to both channel connectors connect
each of them to the desolder control box.
*3 The N2 generator and N2 airflow meter must be connected before using the FM2026. For further details, refer to page 18-21.
15
Future Module
Specifications
Model Name
Model No.
FM-203
Power Consumption
140W
Temperature Range
200-450°C
Temperature Stability
± 5°C at idle temperature
* 1set: 2pcs.
R0
.2
T8-1002 Chip 0.5C
0.7
T8-1003 Chip 1L
0.7
0.5
T8-1004 Chip 2L
0.7
1
T8-1013 Chip 3L
0.7
2
3
Power cord ······················································1
Iron holder with 599B tip cleaner
HAKKO FM-203
(No.FH200-01) ·················································1
Output
24V
Control card ·····················································1
Dimensions
120 (W) x 120 (H) x 190 (D) mm
Connecting cable ·············································1
Weight
2.7kg
Tip tray ····························································1
CHIP
Desoldering / Rework
Heat resistant pad ···········································1
Model No.
FM-2027
* Tip is an optional part.
Power Consumption
70W (24V)
Soldering iron (FM-2027) ·································1
Tip to Ground Resistance
< 2Ω
Iron holder with 599B tip cleaner
Tip to Ground Potential
< 2mV
Total Length (w/o cord)
188mm with 2.4D tip
Weight (w/o cord)
30g with 2.4D tip
Cord
1.2m
HAKKO FM-2027
(Conversion kit)
0.7
6
0.7
8
T8-1008 SOP 13L
10
0.7
13
(No.FH200-01) ·················································1
Connecting cable ·············································1
Smoke Absorber / Static Control
* Tip is an optional part.
FM-2023
Power Consumption
140W (24V)
Temperature Range
200-400°C
Iron holder with cleaning sponge
HAKKO
MODEL FM-2022
(Conversion kit)
64g with SOP 25L tip
FM-2024
Power Consumption
70W (24V)
Temperature Range
350-450°C
Tip to Ground Potential
< 2mV
Tip to Ground Resistance
< 2Ω
Total Length (w/o cord)
180mm with ø1.0 nozzle
Weight (w/o cord & hose)
65g with ø1.0 nozzle
Cord
1.2m
Connecting cable ·············································1
0.7
16
0.7
0.7
20
25
0.7
18
HAKKO
MODEL FM-2023
(Conversion kit)
Iron holder with cleaning sponge
(No.FH200-04) ·················································1
Connecting cable ·············································1
Heat resistant pad ···········································1
Component bed ···············································1
Desoldering tool (MODEL FM-2024) ···············1
T9 Series
For MODEL FM-2023
* 1set: 2pcs.
Desolder control box (DCB) ·····························1
65
Iron holder with 599B tip cleaner
(No.FH200-05) ·················································1
HAKKO
MODEL FM-2024
(Conversion kit)
Desolder Control Box
Other Tools
Model No.
T8-1012 SOP 18L
Tips (T9-I/2pcs of set) ······································1
37g with I tip
MODEL FM-2024
T8-1011 SOP 25L
Mini parallel remover (MODEL FM-2023) ········1
117mm with I tip
1.2m
Cord
T8-1010 SOP 20L
Heating Gun / Glue Gun
Total Length (w/o cord & tip) 148mm with SOP 25L tip
T8-1009 SOP 16L
* Tip is an optional part.
< 2mV
Tip to Ground Potential
SOP
(No.FH200-03) ·················································1
Heat resistant pad ············································1
< 2Ω
Tip to Ground Resistance
Connecting cable ·············································1
Cleaning drill ····················································1
T9-I Chip I
T9-L1 Chip 1L
T9-L2 Chip 2L
Filter pipe assembly ·········································1
24V
Handle (for gun configuration) ·························1
Vacuum Generator
Ejector type
Nozzle remover ················································1
Vacuum Pressure (Max.)
93kPa (700mmHg)
* Nozzle is an optional part.
Suction Flow
28 /min.
Nozzle to Ground Potential
< 2mV
Replacement Parts
490kPa (5.0kgf/cm2) when in use
(trigger or button is pressed.)
Part No.
Name/Description
Compressed Air Consumption
1.62 c.f.m (46 /min.)
FM2027-02
HAKKO FM-2027/Connector assembly 24V-70W
Dimensions
119(W) x 45(H) x 172(D)mm
FM2022-02
MODEL FM-2022/24V-140W
Weight (w/o cord)
1.2kg
FM2023-02
MODEL FM-2023/24V-140W
FM2024-02
MODEL FM-2024/24V-70W
B3216
Sleeve assembly, yellow
B3218
Sleeve assembly, blue
B3217
Sleeve assembly, orange
B3219
Sleeve assembly, green
599B-02
Tip cleaner
B3253
Connecting cable
Combination sample with the N2 system HAKKO FM-203,
HAKKO FM-2026, HAKKO FX-780, HAKKO FX-791
A1514
Ceramic paper filter/10 pcs
A1512
Front holder
* For further details, refer to page 18-21.
A1511
Filter pipe assembly
B2756
Tip tray
1
12W
Output
2
Ceramic paper filter········································10
Power Consumption
Applied Air Pressure
T8-1007 SOP 10L
Parallel remover (MODEL FM-2022) ···············1
FM-2022
Weight (w/o cord)
0.7
T8-1006 SOP 8L
Heat resistant pad ············································1
MODEL FM-2022/MODEL FM-2023
Model No.
T8-1005 SOP 6L
ø3.4
Desoldering / Rework
For MODEL FM-2022
T8-1001 Chip 0.5I
Soldering iron (FM-2027) ·································1
FM-2027
Smoke Absorber / Static Control
T8 Series
Station ·····························································1
Station
Heating Gun / Glue Gun
Contents
Unit : mm
Soldering
Soldering
FM-203
Other Tools
Replacement Tips and Nozzles
Packing List
CHIP
N1 Series
For MODEL FM-2024
106
16
10.7
N1-L10 Nozzle 1.0mm Long
O.D ø2.3
10.7
I.D ø1.3
10.7
I.D ø1
N1-23 Nozzle 2.3mm
I.D ø2.3
I.D ø2
10.7
O.D ø2.6
10.7
O.D ø3.8
N1-20 Nozzle 2.0mm
N1-13 Nozzle 1.3mm
I.D ø1
10.7
10.7
N1-16 Nozzle 1.6mm
N1-10 Nozzle 1.0mm
O.D ø2.2
O.D ø2
I.D ø0.8
I.D ø0.6
O.D ø1.9
N1-08 Nozzle 0.8mm
O.D ø3.4
N2 System
N1-06 Nozzle 0.6mm
O.D ø3
FM-2027: Please refer to page 12-13.
MODEL FM-2022, MODEL FM-2023, MODEL FM-2024: Please
refer to page 17.
I.D ø1.6
Replacement Tips and Nozzles
16.7
17
N 2 System
N2 gas and preheating effect improves the solderbility greatly!
Desoldering / Rework
Compact N2 Flow Meter
Smoke Absorber / Static Control
Smoke Absorber / Static Control
HAKKO FX - 780 generate Nitrogen gas at a maximum concentration of
99.9%. It is very compact and can be installed in a minimal space. Moreover,
it can be placed perpendicularly or horizontally.
Desoldering / Rework
The preheating effect is achieved by passing Nitrogen
gas along the heating element in the hand piece. Soldering can be done on multilayer PWB and high density PWB sensitive to heat without raising the temperature of the tip excessively, even when the melting
point of lead-free solder is high.
Improvement of wettability and spreadability.
Preventing oxidation.
Space saving:–
In case of setting with HAKKO F X-951, the dimensions are 163(W) x 280(H) x 110(D)mm
In case of setting with FM-203, the dimensions are
201(W) x 280(H) x 190(D)mm
Soldering
Soldering
Compact High-Performance N2 Generator
This meter is very compact and can be installed in a minimal space next to the
soldering station. The flow meter has a range between 0.25-2.5 /min, allowing
easy control.
(Recommended flow rate is 0.5 /min. to 1.5 /min. Adjust the flow rate depending on the tip shape.)
Setting example with the FX-951
* HAKKO FX -951, HAKKO FM-2026
HAKKO FX -780, HAKKO FX -791
Comparison of wettability and spreadability
Heating Gun / Glue Gun
Lead-free solder
Heating Gun / Glue Gun
Less bridge is generated
even for components susceptible to bridging.
Eutectic solder
N2 Soldering Iron
(Sn - Cu)
Nitrogen gas passes between the tip and nozzle assembly uniformly and the soldering tip is entirely covered with
Nitrogen gas, which intercepts oxygen to prevent the soldering tip and solder from being oxidized and increases the
preheating effect. It allows more stable and uniform soldering.
Lead-free solder
(Sn - Ag - Cu)
Without N2 (350°C)
With N2 (350°C)
Without N2
With N2
Connection method
Regulator
Other Tools
N2 OUT
Water filter
0.01 µm
Air filter
0.3 µm
Air dryer
N2 Soldering iron with high-out 70W
Compressor
FM-2026 Conversion Kit (No.FM2026-04)
Other Tools
Air tube
OD ø6mm
Air tube
OD ø6mm
AIR IN
Soldering Station
N2 gas generator
HAKKO FX-780
HAKKO FX-950
N2 Soldering Iron
HAKKO FX-951
HAKKO FM-203
HAKKO FM-204
HAKKO FM-2026
Iron holder (No.FH200-01) is included.
Sleep Function
Station
Conversion Kit
FX-950
FX-951
FX-952*
Former Latest Former Latest
FM-203 FM-204 FM-202*
FM-2026 Coversion Kit
(No.FM2026-04)
··· Equipped with the sleep function
HAKKO FX-838
HAKKO FX-8302
··· Not equipped with the sleep function
* Discontinued Product
N2 stat ion
HAKKO FX-791
Heavy-duty soldering iron 150W
Easy tip replacement
– A car tridge type soldering tip can be replaced easily and quickly.
* Select one.
18
* Select one.
19
N 2 System
Dimensions
70(W) x 121(H) x 134(D)mm
Weight
600g
Pressure Gauge for Discharged Gas
0.2MPa (2.0kgf/cm2)
70W (24V)
Tip to Ground Resistance
< 2Ω
Tip to Ground Potential
< 2mV
Cord
1.2m
Total Length (w/o cord)
205mm with 2.4D tip
Weight (w/o cord)
45g w/nozzle assembly C & 2.4D tip
2.
1
Part No.
Name/Description
FM2026-02
HAKKO FM-2026/24V-70W
B2974
Sleeve cover
B2765D
Sleeve assembly, yellow
B2768D
Sleeve assembly, orange
B2769D
Sleeve assembly, blue
Tip to Ground Potential
< 2mV
Cord
1.2m
Total Length (w/o cord)
195mm with 2.4D tip
Weight (w/o cord)
41g w/nozzle assembly D & 2.4D tip
ø5.5
Nozzle
assembly A
B2708
T13-D24
Shape-KF
ø1
Shape-0.8D
Nozzle
assembly D
9.5
B2708
T13-J02
Shape-0.2J
B2707
3.5
Nozzle
assembly C
0.5
4.1
10
B2923
B2709
3.2
0.5
T13-KR
Shape-KR
B2902
Nozzle
assembly J
45°
2.4
Nitrogen guard
T13-D08
Nozzle
assembly G
Shape-2.4D
10
T13-KF
B2900
45°
10
3.5
Nozzle
assembly B
12
T13-KU
Shape-KU
B2901
Nozzle
assembly I
45°
11
1.5
17
Nozzle
assembly H
45°
1.2
11
* When using the soldering iron holder cover, install it into your soldering iron holder.
T13-BCM2
Shape-2BC
Bevel with indent**
Sleeve Assemblies
2.
1
< 2Ω
Shape-3BC
Nozzle
assembly C
0.5
45°
11.5
0.
9
150W
Tip to Ground Resistance
Nozzle
assembly F
45°
11.5
12
B2706
T13-BCM3
Shape-3BC
Bevel with indent**
B2900
Nozzle
assembly A
Nozzle
assembly G
45°
10
5
3.
Power Consumption
T13-BC3
T13-BCF3*
8
1.
FX-8302
Shape-1.6D
B2706
B2899
Heating Gun / Glue Gun
B2998*
Model No.
°
45
11.5
T13-D16
Replacement and Optional Parts
T13-BC1
Shape-1BC
T13-BCF1*
1.
1
* This unit does not include a soldering tip or nozzle assembly. When purchasing this unit, please buy your desired soldering tip and nozzle assembly together.
ø1.6
Power Consumption
Shape-2BC
ø4.7
FM-2026
Applicable
Nozzle Assembly
Tip
Nozzle
assembly E
2
.
R0
10
ø2
Model No.
FX-8302
* These tips are tinned on the soldering surface only.
** T13-BCM2 and T13-BCM3 are not available for sale or use in the U.S.A.
No. B2765D (Yellow)
No. B2769D (Blue)
For FX-8302
ø7.2
No. B2768D (Orange)
Other Tools
Other Tools
T13-BC2
T13-BCF2*
0.25-2.5 /min
FM-2026
Heating Gun / Glue Gun
N2 soldering iron (FX-8302)······························1
B2898
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Gas flow
* This unit does not include a soldering tip or nozzle assembly. When purchasing this unit, please buy your desired soldering tip and nozzle assembly together.
HAKKO FX-8302
Nozzle
assembly C
Shape-BL
ø0.8
FX-791
.5
R0
Applicable
Nozzle Assembly
Tip
T13-BL
ø0.2
Model No.
B2708
Connecting cable ·············································1
Heat resistant pad ············································1
FX-791
Shape-0.5B
ø3
HAKKO FM-2026
(Conversion kit)
T13-B2
Nozzle Assembly
30°
1.5kg
(No.FH200-01) ·················································1
Applicable
Nozzle Assembly
Tip
ø3
Weight (w/o racks)
Iron holder with 599B tip cleaner
ø2.4
73(W) x 282(H) x 71(D)mm
N2 station ·························································1
N2 soldering iron (FM-2026) ····························1
(When compressed air of 0.5MPa is supplied at 25°C,
the concentration of generated nitrogen is 98%.)
Dimensions
(w/o sockets & valve)
Racks for station ··············································2
144
HAKKO FX-791
ø4.7
1.5 /min.
HAKKO FX-780
ø3
99.9% (Max.)
3.
3
0.3-0.7MPa
Concentration of Generated N2
N2 generator ····················································1
3.
3
Air Supply Pressure
For FM-2026
Contents
ø2
FX-780
Desoldering / Rework
Desoldering / Rework
Model Name
Model No.
Unit : mm
Soldering
Soldering
FX-780
Amount of Generated N2
Optional Tips and Nozzle Assemblies
Packing List
2.
1
Specifications
90
T20-BC2
T20-BCF2*
10
12
B3124
T20-C5
B3124
Nozzle
assembly D
˚
45
12
T20-C6
B3124
4.
4
4
10
Nozzle
assembly D
˚
45
5.
3
5˚
10
ø6
ø5
B3124
ø4
T20-BC4
T20-BCF4*
T20-BC3
T20-BCF3*
Nozzle
assembly D
˚
45
2.
3
R
0.
5
Nozzle
assembly A
B3124
ø3
B3121
Applicable
Nozzle Assembly
3.
4
T20-B2
Applicable
Nozzle Assembly
ø2
Tip
Applicable
Nozzle Assembly
Nozzle
assembly D
˚
45
Nozzle
assembly D
10
Nozzle
assembly C
Nozzle
assembly D
0.5
12
ø6
B3561
3.5
T20-J02
30˚
Nozzle
assembly E
1.2
B3124
Nozzle
assembly D
0.5
10
11.5
10
B3122
Nozzle
assembly B
R0.2
T20-D6
T20-D32
T20-K
B3123
ø5
0.5
B3124
ø3.2
T20-D24
ø2.4
B3123
ø1.6
T20-D16
2
Nozzle
assembly C
˚
45
9
14
1.2
T20-BL
Nozzle
assembly B
˚
45
B3121
R
Nozzle
assembly A
2
0.
15
T20-BL2
B3121
R0
.5
B3122
ø3
T20-KU
Nozzle
assembly A
15
14
T20-BL3
T20-BCM2**
B3124
ø2
B3123
R1
Nozzle
assembly C
15
20
2.
3
1.
4
* Tinned on the soldering surface only.
** The part number T20-BCM2 is not available for sale or use in the U.S.A.
Nozzle
assembly D
˚
45
12
21
Soldering Station
The temperature preset mode allows you to input three frequently-used temperatures in advance and recall them
with one push of a button.
Desoldering / Rework
Smoke Absorber / Static Control
For setting the temperature according to
the tip shape or application.
For the temperature setting by different
operators.
Push the button once.
P2
One push of a button can
quickly recall each setting.
Push the button once.
P3
* Factory default is nomal. Change the parameter to use 'temperature preset mode'.
* Factory default: 300°C for P1, 350°C for P2 and 400°C for P3
A great change!
Because 500°C is the maximum
setting temperature, work which is
assumed to suffer from insufficient
thermal power can be done.
Easy Tip Replacement
Temp.(°C)
400
Example
Smoke Absorber / Static Control
Thermal Recovery Graph
Push the button once.
P1
Desoldering / Rework
High Power 150W Soldering Station suitable for
soldering from large to fine components.
Great thermal recovery improves the soldering
environment.
Easy and speedy tip replacement is possible.
Equipped with high-power mode for soldering
heat sinks, shield cases and chassis, which require high heat capacity in particular.
Operate at Maximum Temperature of 500 degrees.
Temperature preset mode saves time and effort.
Auto sleep function
Auto power shutoff function
Soldering
Soldering
Temperature preset mode
Replacement Tips
Tips can be quickly and easily replaced because they are of the cartridge type.
Unit : mm
350
300
350
Time (sec.)
Loosen the nipple slightly and
remove the tip.
Replace the tip and tighten the
nipple.
T20-B2
B3121
Nozzle
assembly A
N2 Soldering Iron (Optional)
158W
B3124
˚
Station
Temperature Stability
±5°C
Dimensions
110(W) x 110(H) x 205(D)mm
Weight (w/o cord)
3.2kg
B3124
10
Nozzle
assembly D
˚
45
10
Nozzle
assembly D
˚
12
T20-C6
B3124
Nozzle
assembly D
˚
45
Nozzle
assembly D
10
T20-D16
B3123
T20-D24
B3124
Nozzle
assembly C
0.5
Nozzle
assembly D
0.5
12
Iron
45
T20-D32
B3124
ø2.4
200-500°C
T20-C5
ø1.6
27V
Temperature Range
4.
4
45
Output Voltage
Nozzle
assembly D
˚
45
12
T20-BC4
T20-BCF4*
B3124
ø5
HAKKO FX-838
Power Consumption
10
ø4
Model No.
B3124
Applicable
Nozzle Assembly
T20-BC3
T20-BCF3*
Other Tools
Nozzle
assembly D
0.5
10
10
N2 System to Expand the HAKKO FX-838 Functions
< 2Ω
Resistance
< 2mV
Tip to Ground Potential
Ceramic heater
Heating Element
1.2m
Length of Cord
175mm with 2.4D tip
Length (w/o cord)
31g with 2.4D tip
B3561
T20-J02
B3122
T20-K
B3123
3.5
Nozzle
assembly E
1.2
11.5
Nozzle
assembly B
ø5
Tip to Ground
T20-D6
Combination sample
HAKKO FX-838,
HAKKO FX-8302*,
HAKKO FX-780,
HAKKO FX-791.
R0.2
150W
ø6
Power Consumption
2
Nozzle
assembly C
˚
45
9
14
T20-KU
B3122
T20-BL
B3121
T20-BL2
B3121
ø3
HAKKO FX-8301
30˚
Model No.
1.2
Nozzle
assembly B
˚
45
R
0.
Nozzle
assembly A
2
15
R0
.5
Other Tools
Specifications
Applicable
Nozzle Assembly
T20-BC2
T20-BCF2*
ø6
250
ø3.2
200
3.
4
150
ø2
100
R
0.
5
50
ø3
Applicable
Nozzle Assembly
Tip
0
2.
3
50
90
5.
3
150
100
Heating Gun / Glue Gun
FX-838 (150W)
FX-951 (70W)
Test criteria
Tip shape: 2.4D Board: Paper phenol copper
Solder: ø1.6 x 5mm Cycle: Every 3 sec.
Lead-free solder is used.
250
200
Heating Gun / Glue Gun
ø7.2
300
Nozzle
assembly A
15
14
Packing List
T20-BL3
B3123
T20-BCM2**
Station ······································································1
Iron (FX-8301) ··························································1
B3124
ø2
Contents
Nozzle
assembly C
R1
Model Name
* Optional HAKKO FX-8302 is required to
complete N 2 System.
15
2.
3
1.
4
Nozzle
assembly D
˚
45
12
Control card ······························································1
Hakko FX-838
Power cord ·······························································1
Iron holder with cleaning sponge and 599B ·············1
* Tinned on the soldering surface only.
** The part number T20-BCM2 is not available for sale or use in the U.S.A.
Connecting cable ······················································1
22
Heat resistant pad ····················································1
* Tip are optional parts.
23
Soldering Station
Small
Unit : mm
For 900S, 900S-ESD
900S-T-B Shape-B
900S-T-1C Shape-1C
60°
900S-T-1.6D Shape-1.6D
900S-T- I Shape-I
R0.2
17
17
0.5
For 900M, 900M-ESD, 907, 907-ESD, 933
900M-T-0.5C Shape-0.5C
2
3
4
5
100
50
50
A
0
min.
2
4
6
min.
0
ø1.6
15
2
2
4
6
8 min.
25
3.2
2
2
17
R0.25
9
17
120(W) x 93(H) x 170(D)mm
Weight (w/o cord)
1.3kg
900S
907
908
S
M
L
Regular
ESD Regular
900S-T-I
ESD
900M-T-B
ø2
900L-T-4C Shape-4C
900L-T-4CF*
Optional Parts
Please refer to page 27, 59.
45°
900L-T-2.4D Shape-2.4D
45°
20
5
0.5
900L-T-K Shape-K
0.5
8
20
900L-T-S1 Shape-S1
R0.2
45°
2
1
18
9
19
* These tips are tinned on the soldering surface only.
190mm
200mm
25g
44g
54g
Stackable design puts two units
in the bench space of one unit.
For SMD Desoldering
907
907 ESD
900M
900M ESD
Optional Tips
+
Tip Holder (No.900M-1000)
Tip Size
A
B
C
D
924-T-1002
12.5
9.5
12.5
9.5
15.5
12.5
15.5
12.5
924-T-1004
16.3
13.3
16.3
13.3
924-T-1005
17.0
14.0
17.0
14.0
Tip
924-T-1006
23.0
20.0
17.0
14.0
924-T-1007
20.0
17.0
20.0
17.0
Part No.
Tip* Nut
Tip Holder
A
B
6.0
5.0
924-T-1011
6.0
10.0
924-T-1012
7.0
12.5
924-T-1013
9.0
15.2
924-T-1014
9.0
18.0
924-T-1020
* Tip is not included.
A
B
Tip Size
924-T-1010
Part No.
Spring Washer
1.6
.5
R1
924-T-1003
+
No.900M-1000
Tapping Screw
Unit : mm
Part No.
D
C
176mm
1.6
Ceramic Heater
Heating Element
24
900L-T-3.2D Shape-3.2D
20
15
900L-T-I Shape-I
20
20
900L-T-5C Shape-5C
900L-T-5CF*
20
900L-T-B
45°
45°
20
< 2mV (Typ.0.6mV)
Tip to Ground Potential
Weight (w/o cord)
Regular
Tip Out Dia.ø8.5mm
900L-T-3C Shape-3C
900L-T-3CF*
900L-T-2C Shape-2C
900L-T-2CF*
R1
20
Please refer to page 25.
< 2Ω
Tip to Ground Resistance
Total Length (w/o cord)
ESD
50W (24V)
Power Consumption
Standard Tip
ø2
Replacement Tips
Iron
Style
R0.5
(900S-No.C1141, 907/908-No.C1142) ····························1
Control card ·····································································1
When ordering or HAKKO 937, please specify the type of Iron (S, M or L).
900L-T-2B Shape-2B
ø3
Dimensions
For 900L, 900L-ESD, 908, 908-ESD, 934
900L-T-B Shape-B
ø3.2
200-480°C
Large
ø2.4
Temperature Range
····················································1
Iron holder with cleaning sponge
ø5.6
AC 24V
ø5
Iron (900S/907/908)
HAKKO 937
Output Voltage
Type
13
14
Contents
Station··············································································1
Station
Model No.
R0.2
R0.2
ø5
60W
15
19
900M-T-SI Shape-SI
ø4
Power Consumption
Model Name
900M-T-S4 Shape-S4
Other Tools
Other Tools
937
25
1
900M-T-S3 Shape-S3
1
Packing List
8
1
25
0.7
900M-T-RT Shape-RT
ø5.1
900M-T-R Shape-R
900M-T-SB Shape-SB
Model No.
900M-T-2LD Shape-2LD
R0.2
45°
A
* Test criteria
Board: Paper phenol copper
Solder: ø1.6 x 5mm
Cycle: Every 3 sec.
Specifications
17
900M-T-1.2LD Shape-1.2LD
A
1
150
100
900M-T-LB Shape-LB
ø4.2
0
150
900M-T-K Shape-K
1.6
A
19
E:40sec
2
50
A:Room Temperature 25°C(77°F)
B:Time for Heat-Up
C:Temperature Drop
D:Time for Operation
E:Time forThermal Recovery
R0.2
25°
14
7.5
25°
7.5
B
Type
Spatula 9.5
9.5
100
200
1
1.8
17
0.5
D:180sec
250
900M-T-I Shape-I
ø2
150
E:20sec
200
900M-T-1.8H Shape-1.8H
3.5
6.5
300
D:180sec
250
17
0.5
ø2
200
900M-T-H Shape-H
1.2
C:50°C
350
300
E:16sec
D:180sec
250
5
17
0.5
Heating Gun / Glue Gun
Heating Gun / Glue Gun
300
900M-T-3.2D Shape-3.2D
400
350
17
0.7
450
C:60°C
400
C:90°C
350
17
0.6
B:140sec
500
450
400
3
(with 900L-T-B Tip.)
550
ø1.2
450
Thermal
recovery
graph*
(with 900M-T-B Tip.)
B:75sec
500
900M-T-2.4D Shape-2.4D
ø5.2
550
ø3.2
(with 900S-T-I Tip.)
B:42sec
500
ø1.2
ø0.8
908-ESD
(°C)
17
900M-T-1.6D Shape-1.6D
ø5
550
ø4
ø3
ø2
ø1.5
Smoke Absorber / Static Control
907-ESD
(°C)
Smoke Absorber / Static Control
900S-ESD
(°C)
45°
17
900M-T-1.2D Shape-1.2D
15
900M-T-4C Shape-4C
900M-T-4CF*
45°
17
900M-T-0.8D Shape-0.8D
60°
17
900M-T-3C Shape-3C
900M-T-3CF*
45°
15
Model No.
45°
15
900M-T-2C Shape-2C
900M-T-2CF*
60°
ø1
ø0.8
ø0.5
45°
17
Large: For heavy duty soldering
Tip Out Dia.ø6.5mm
900M-T-1C Shape-1C
900M-T-1CF*
900M-T-0.8C Shape-0.8C
ø2.4
Medium
900M-T-1.5CF* Shape-1.5C
Medium: Standard
17
17
0.4
R0.5
Small: For micro soldering
45°
15
17
Irons for Soldering Stations
Type
ø1.2
ø2
ø1
R0.5
900M-T-B Shape-B
3 Types of iron available: for HAKKO 937 Soldering Stations
Tip Out Dia.ø5.8mm
900S-T-1.2D Shape-1.2D
900S-T-2C Shape-2C
ø1.6
Desoldering / Rework
Replacement Tips
Desoldering / Rework
Digital indicator ensures accurate temperature
setting by all personnel.
Once set, temperature cannot be changed without inserting the control card, providing easy
temperature management.
Compact unit takes up little space on the workbench.
Thinner grip for easier use.
ESD safe by design.
Soldering
Soldering
LEAD
FREE
9.5
8
25
Soldering Gun
Specifications
Optional Parts
Packing List
Model No.
135(W) x 88(H) x 190(D)mm
Weight (w/o cord)
HAKKO 928 (LM)
2.7kg
Iron
Model No.
900S-ESD
HAKKO 928 (MM)
Ceramic Heater
176mm
190mm
200mm
25g
45g
55g
Weight (w/o cord)
Guide nozzle/ø1.0mm ESD
< 2Ω
B2655
Guide nozzle/ø1.2mm ESD
< 2mV (Typ.0.6mV)
B2656
Guide nozzle/ø1.6mm ESD
Station ····························································1
Iron (900L-ESD, 900M-ESD) ··························2
Iron holder with cleaning sponge
(No.631-03) ····················································1
Heating Element
Ceramic Heater
A1321
Heating element
C1437
Iron holder
Station ····························································1
Iron (900M-ESD, 900M-ESD) ·························2
Iron holder with cleaning sponge
(No.631-03) ····················································1
< 2mV (Typ.0.6mV)
Heating Element
B2654
900L-T-B
HAKKO 928 (LS)
2Ω
Tip to Ground Potential
Total Length (w/o cord)
900M-T-B
200-480°C
HAKKO 928 (MS)
Tip to Ground Potential
Standard Tip
900M-T-S10 (Shape-S10)
Standard Guide Nozzle
Usable Solder Dia.
900L-T-B (Shape-B)
ø1.0mm (No.B2654)
ø0.6, 0.8, 1.0, 1.2, 1.6mm
1.1m
Cord
Dimensions (w/o cord)
Weight (w/o cord)
170 (W) x 180 (H)mm
177g
187g
Replacement Tips
Medium
Unit : mm
For 951, 958
900M-T-B
Shape-B
900M-T-BF2*
Tip Out Dia ø6.5mm
900M-T-0.8C
R0.5
45°
900M-T-1.6D
900M-T-K
Shape-K
45°
900M-T-2.4D
17
Shape-SB
900M-T-S3
R0.2
Shape-S3
15
2
Shape-S10
14
900M-T-S11
6.5
0.5
900M-T-S4
9
1
19
15
ø4
55°
17
17
For 952, 959
900L-T-B
Shape-B
Tip Out Dia ø8.5mm
900L-T-2B
Shape-2B
R1
900L-T-2C
900L-T-2CF*
Shape-2C
900L-T-3C
900L-T-3CF*
20
20
15
900L-T-S1
20
900L-T-3.2D
0.5
Shape-3.2D
20
8
0.5
20
Shape-S1
ø5
ø5.6
Shape-K
45°
20
Shape-2.4D
ø3.2
ø5
45°
20
45°
2
900L-T-2.4D
5
45°
900L-T-K
45°
Shape-5C
ø2.4
900L-T-5C
900L-T-5CF*
ø4
Shape-4C
Shape-3C
ø3
ø2
R0.5
900L-T-4C
900L-T-4CF*
17
Shape-S4
Shape-S11
55°
Large
17
Shape-3.2D
R0.25
45°
900M-T-S10
45°
900M-T-3.2D
5
0.5
900M-T-SB
900M-T-3C
Shape-3C
900M-T-3CF*
17
Shape-2.4D
17
0.5
17
ø3
Please refer to page 27, 59.
17
Shape-1.6D
3
45°
900M-T-2C
Shape-2C
900M-T-2CF*
ø2
HAKKO 928 (SS)
Optional Parts
Station ····························································1
Iron (900S-ESD, 900S-ESD) ··························2
Iron holder with cleaning sponge
(No.631-05) ····················································1
ø5
Please refer to page 25.
Shape-0.8C
17
900M-T-4C
Shape-4C
900M-T-4CF*
ø4
Replacement Tips
Station ····························································1
Iron (900M-ESD, 900S-ESD)··························2
Iron holder with cleaning sponge
(No.631-04) ····················································1
Tip to Ground Resistance
Other Tools
Other Tools
900S-T-I
Tip to Ground Resistance
Guide nozzle/ø0.8mm ESD
Temperature Range
Station ····························································1
Iron (900L-ESD, 900S-ESD) ··························2
Iron holder with cleaning sponge
(No.631-04) ····················································1
900L-ESD
50W (24V)
Power Consumption
Standard Tip (Shape-B)
900M-ESD
B2653
ø3
Dimensions
50W (24V)
ø3.2
200-480°C
Station ····························································1
Iron (900L-ESD, 900L-ESD) ···························2
Iron holder with cleaning sponge
(No.631-03) ····················································1
Power Consumption
ø2
Temperature Range
Guide nozzle/ø0.6mm ESD
Contents
ø2
AC 24V
Name/Description
B2652
ø2.4
Output Voltage
Part No.
ø5.2
HAKKO 928 (LL)
Station
L
ø0.8
120W
952
M
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Power Consumption
Model Name
928
951
Type
ø1.6
Specifications
Model No.
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Available for your Hakko 701, 702B, 928
or 937.
ESD safe by design.
Compact design and light weight.
Easy positioning for the solder feeding.
A variety of tip type.
Desoldering / Rework
Desoldering / Rework
Two soldering irons of different thermal capacities may be used simultaneously.
Choose the exact irons you need for your soldering applications.
Cost effective and practical in production, using
up less available space.
Super quick heat-up and faster thermal recovery,
permitting high quality soldering at lower temperature.
Two separate controls, independent of each
other.
Soldering
Soldering
Soldering Station
18
9
1
19
* These tips are tinned on the soldering surface only.
* 900M-T-BF2 is tinned a distance of 2mm from the end of the tip.
For heavy duty soldering HAKKO recommends the 952 and the 959 with heavier tips.
CAUTION
26
Use only genuine replacement tips for Hakko 951, 952, 958, 959.
The tips for Hakko Dash are not available to use.
27
Soldering Gun
Specifications
Optional Parts
Packing List
Model No.
135(W) x 88(H) x 190(D)mm
Weight (w/o cord)
HAKKO 928 (LM)
2.7kg
Iron
Model No.
900S-ESD
HAKKO 928 (MM)
Ceramic Heater
176mm
190mm
200mm
25g
45g
55g
Weight (w/o cord)
Guide nozzle/ø1.0mm ESD
< 2Ω
B2655
Guide nozzle/ø1.2mm ESD
< 2mV (Typ.0.6mV)
B2656
Guide nozzle/ø1.6mm ESD
Station ····························································1
Iron (900L-ESD, 900M-ESD) ··························2
Iron holder with cleaning sponge
(No.631-03) ····················································1
Heating Element
Ceramic Heater
A1321
Heating element
C1437
Iron holder
Station ····························································1
Iron (900M-ESD, 900M-ESD) ·························2
Iron holder with cleaning sponge
(No.631-03) ····················································1
< 2mV (Typ.0.6mV)
Heating Element
B2654
900L-T-B
HAKKO 928 (LS)
2Ω
Tip to Ground Potential
Total Length (w/o cord)
900M-T-B
200-480°C
HAKKO 928 (MS)
Tip to Ground Potential
Standard Tip
900M-T-S10 (Shape-S10)
Standard Guide Nozzle
Usable Solder Dia.
900L-T-B (Shape-B)
ø1.0mm (No.B2654)
ø0.6, 0.8, 1.0, 1.2, 1.6mm
1.1m
Cord
Dimensions (w/o cord)
Weight (w/o cord)
170 (W) x 180 (H)mm
177g
187g
Replacement Tips
Medium
Unit : mm
For 951, 958
900M-T-B
Shape-B
900M-T-BF2*
Tip Out Dia ø6.5mm
900M-T-0.8C
R0.5
45°
900M-T-1.6D
900M-T-K
Shape-K
45°
900M-T-2.4D
17
Shape-SB
900M-T-S3
R0.2
Shape-S3
15
2
Shape-S10
14
900M-T-S11
6.5
0.5
900M-T-S4
9
1
19
15
ø4
55°
17
17
For 952, 959
900L-T-B
Shape-B
Tip Out Dia ø8.5mm
900L-T-2B
Shape-2B
R1
900L-T-2C
900L-T-2CF*
Shape-2C
900L-T-3C
900L-T-3CF*
20
20
15
900L-T-S1
20
900L-T-3.2D
0.5
Shape-3.2D
20
8
0.5
20
Shape-S1
ø5
ø5.6
Shape-K
45°
20
Shape-2.4D
ø3.2
ø5
45°
20
45°
2
900L-T-2.4D
5
45°
900L-T-K
45°
Shape-5C
ø2.4
900L-T-5C
900L-T-5CF*
ø4
Shape-4C
Shape-3C
ø3
ø2
R0.5
900L-T-4C
900L-T-4CF*
17
Shape-S4
Shape-S11
55°
Large
17
Shape-3.2D
R0.25
45°
900M-T-S10
45°
900M-T-3.2D
5
0.5
900M-T-SB
900M-T-3C
Shape-3C
900M-T-3CF*
17
Shape-2.4D
17
0.5
17
ø3
Please refer to page 27, 59.
17
Shape-1.6D
3
45°
900M-T-2C
Shape-2C
900M-T-2CF*
ø2
HAKKO 928 (SS)
Optional Parts
Station ····························································1
Iron (900S-ESD, 900S-ESD) ··························2
Iron holder with cleaning sponge
(No.631-05) ····················································1
ø5
Please refer to page 25.
Shape-0.8C
17
900M-T-4C
Shape-4C
900M-T-4CF*
ø4
Replacement Tips
Station ····························································1
Iron (900M-ESD, 900S-ESD)··························2
Iron holder with cleaning sponge
(No.631-04) ····················································1
Tip to Ground Resistance
Other Tools
Other Tools
900S-T-I
Tip to Ground Resistance
Guide nozzle/ø0.8mm ESD
Temperature Range
Station ····························································1
Iron (900L-ESD, 900S-ESD) ··························2
Iron holder with cleaning sponge
(No.631-04) ····················································1
900L-ESD
50W (24V)
Power Consumption
Standard Tip (Shape-B)
900M-ESD
B2653
ø3
Dimensions
50W (24V)
ø3.2
200-480°C
Station ····························································1
Iron (900L-ESD, 900L-ESD) ···························2
Iron holder with cleaning sponge
(No.631-03) ····················································1
Power Consumption
ø2
Temperature Range
Guide nozzle/ø0.6mm ESD
Contents
ø2
AC 24V
Name/Description
B2652
ø2.4
Output Voltage
Part No.
ø5.2
HAKKO 928 (LL)
Station
L
ø0.8
120W
952
M
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Power Consumption
Model Name
928
951
Type
ø1.6
Specifications
Model No.
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Available for your Hakko 701, 702B, 928
or 937.
ESD safe by design.
Compact design and light weight.
Easy positioning for the solder feeding.
A variety of tip type.
Desoldering / Rework
Desoldering / Rework
Two soldering irons of different thermal capacities may be used simultaneously.
Choose the exact irons you need for your soldering applications.
Cost effective and practical in production, using
up less available space.
Super quick heat-up and faster thermal recovery,
permitting high quality soldering at lower temperature.
Two separate controls, independent of each
other.
Soldering
Soldering
Soldering Station
18
9
1
19
* These tips are tinned on the soldering surface only.
* 900M-T-BF2 is tinned a distance of 2mm from the end of the tip.
For heavy duty soldering HAKKO recommends the 952 and the 959 with heavier tips.
CAUTION
26
Use only genuine replacement tips for Hakko 951, 952, 958, 959.
The tips for Hakko Dash are not available to use.
27
Desoldering / Rework
Smoke Absorber / Static Control
933
934
Power Consumption
Heating Gun / Glue Gun
Temperature
900M-T-B (Shape-B)
< 2Ω
< 2mV (Typ.0.6mV)
Heating Element
Total Length (w/o cord)
Weight (w/o cord)
HAKKO 933
300 · 330 · 360 · 390 · 420 · 450 · 480°C
Tip to Ground Resistance
Tip to Ground Potential
900L-T-B (Shape-B)
HAKKO 934
Ceramic Heater
200mm
210mm
55g
65g
Model No.
918
Iron (M) ·······································································1
Power Consumption
Temperature setting button ·········································3
Standard Tip
(360°C-No.B1768, 390°C-No.B1769, 420°C-No.B1770)
Temperature
Iron (L) ········································································1
Heating Element
Temperature setting button ·········································3
Insulation Resistance
(360°C-No.B1768, 390°C-No.B1769, 420°C-No.B1770)
Total Length (w/o cord)
921
922
55W
918-T-B (Shape-B) 920-T-SB (Shape-SB)
420°C
300°C
920-T-B (Shape-B)
370°C
420°C
Ceramic Heater
100MΩ
No.606
220mm
210mm
70g
50g
Weight (w/o cord)
* 390°C button is originally set into the iron.
Other setting buttons are available as optional parts.
920
No.633-01
No.633-02
Replacement Tips
Shape-B
918-T-BC
°
60
20
45°
Optional Parts
B1770
Temp. setting button 420°C
B1771
Temp. setting button 450°C
B1772
Temp. setting button 480°C
Temp. Setting Button
ø4
°
45
14
20
1
20
20
For 920, 921, 922
920-T-A
Shape-A
920-T-B
Shape-B
920-T-2C
920-T-2CF*
Shape-2C
R0
.5
15
920-T-BC
920-T-3C
920-T-3CF*
920-T-2.4D
Shape-BC
Shape-3C
°
60
45°
13
19
45 °
Shape-2.4D
14
ø2
Temp. setting button 390°C
Shape-3D
920-T-4C
920-T-4CF*
Shape-4C
ø4
B1769
ø5
Temp. setting button 360°C
No.633-02
ø0.5
Temp. setting button 330°C
B1768
No.633-01
918-T-3D
ø1.6
B1767
No.606
45°
ø3
Temp. setting button 300°C
Shape-5C
Shape-4C
22
°
45
14
ø2.4
Name/Description
B1766
918-T-5C
918-T-5CF*
20
918-T-4C
918-T-4CF*
ø3
Shape-3C
ø3
918-T-3C
918-T-3CF*
Part No.
Shape-BC
Other Tools
R0
.5
ø1.6
918-T-B
Please refer to page 25.
·Tips for HAKKO 933 = Tips for M-Type Iron
·Tips for HAKKO 934 = Tips for L -Type Iron
Other Tools
Unit : mm
For 918
Recommended Iron Holders
Replacement Tips
Heating Gun / Glue Gun
Standard Tip
Model Name Contents
51W
Smoke Absorber / Static Control
Model No.
Recommended Iron Holders
Specifications
Packing List
Desoldering / Rework
Begin soldering in only 10 seconds!
Greater thermal capacity and rapid transmission
to the tip means faster thermal recovery.
The temperature control sensor is built into the
heating element for faster, more stable temperature control.
The highly insulated ceramic heater never overheats.
An insulation factor of over 100MΩ can be maintained even during actual use.
The compact, light weight design with high cooling efficiency at the handle permits fatigue-free
soldering over long periods for maximum work
efficiency.
Simple and quick temperature setting by inserting the appropriate temperature button into the
handle.
Easy temperature management-preset temperature can be seen at a glance.
More efficient use of work space.
Specifications
Soldering
Soldering
Soldering Iron
920-T-I
Shape-I
920-T-R
Shape-R
R0
15
.5
5
0.5
920-T-RT
Shape-RT
15
ø4.8
3.2
Shape-SB
ø2
920-T-SB
17
1.5
16
ø4.2
2
13
3
16
* These tips are tinned on the soldering surface only.
28
29
Desoldering / Rework
Smoke Absorber / Static Control
933
934
Power Consumption
Heating Gun / Glue Gun
Temperature
900M-T-B (Shape-B)
< 2Ω
< 2mV (Typ.0.6mV)
Heating Element
Total Length (w/o cord)
Weight (w/o cord)
HAKKO 933
300 · 330 · 360 · 390 · 420 · 450 · 480°C
Tip to Ground Resistance
Tip to Ground Potential
900L-T-B (Shape-B)
HAKKO 934
Ceramic Heater
200mm
210mm
55g
65g
Model No.
918
Iron (M) ·······································································1
Power Consumption
Temperature setting button ·········································3
Standard Tip
(360°C-No.B1768, 390°C-No.B1769, 420°C-No.B1770)
Temperature
Iron (L) ········································································1
Heating Element
Temperature setting button ·········································3
Insulation Resistance
(360°C-No.B1768, 390°C-No.B1769, 420°C-No.B1770)
Total Length (w/o cord)
921
922
55W
918-T-B (Shape-B) 920-T-SB (Shape-SB)
420°C
300°C
920-T-B (Shape-B)
370°C
420°C
Ceramic Heater
100MΩ
No.606
220mm
210mm
70g
50g
Weight (w/o cord)
* 390°C button is originally set into the iron.
Other setting buttons are available as optional parts.
920
No.633-01
No.633-02
Replacement Tips
Shape-B
918-T-BC
°
60
20
45°
Optional Parts
B1770
Temp. setting button 420°C
B1771
Temp. setting button 450°C
B1772
Temp. setting button 480°C
Temp. Setting Button
ø4
°
45
14
20
1
20
20
For 920, 921, 922
920-T-A
Shape-A
920-T-B
Shape-B
920-T-2C
920-T-2CF*
Shape-2C
R0
.5
15
920-T-BC
920-T-3C
920-T-3CF*
920-T-2.4D
Shape-BC
Shape-3C
°
60
45°
13
19
45 °
Shape-2.4D
14
ø2
Temp. setting button 390°C
Shape-3D
920-T-4C
920-T-4CF*
Shape-4C
ø4
B1769
ø5
Temp. setting button 360°C
No.633-02
ø0.5
Temp. setting button 330°C
B1768
No.633-01
918-T-3D
ø1.6
B1767
No.606
45°
ø3
Temp. setting button 300°C
Shape-5C
Shape-4C
22
°
45
14
ø2.4
Name/Description
B1766
918-T-5C
918-T-5CF*
20
918-T-4C
918-T-4CF*
ø3
Shape-3C
ø3
918-T-3C
918-T-3CF*
Part No.
Shape-BC
Other Tools
R0
.5
ø1.6
918-T-B
Please refer to page 25.
·Tips for HAKKO 933 = Tips for M-Type Iron
·Tips for HAKKO 934 = Tips for L -Type Iron
Other Tools
Unit : mm
For 918
Recommended Iron Holders
Replacement Tips
Heating Gun / Glue Gun
Standard Tip
Model Name Contents
51W
Smoke Absorber / Static Control
Model No.
Recommended Iron Holders
Specifications
Packing List
Desoldering / Rework
Begin soldering in only 10 seconds!
Greater thermal capacity and rapid transmission
to the tip means faster thermal recovery.
The temperature control sensor is built into the
heating element for faster, more stable temperature control.
The highly insulated ceramic heater never overheats.
An insulation factor of over 100MΩ can be maintained even during actual use.
The compact, light weight design with high cooling efficiency at the handle permits fatigue-free
soldering over long periods for maximum work
efficiency.
Simple and quick temperature setting by inserting the appropriate temperature button into the
handle.
Easy temperature management-preset temperature can be seen at a glance.
More efficient use of work space.
Specifications
Soldering
Soldering
Soldering Iron
920-T-I
Shape-I
920-T-R
Shape-R
R0
15
.5
5
0.5
920-T-RT
Shape-RT
15
ø4.8
3.2
Shape-SB
ø2
920-T-SB
17
1.5
16
ø4.2
2
13
3
16
* These tips are tinned on the soldering surface only.
28
29
Desoldering / Rework
Both the HAKKO 455·456 incorporate a ceramic
heating element, which provides a longer service
life than conventional nichrome heating element.
Alloy-coated iron tips ensure long-lasting protection from corrosion.
The HAKKO 455 is perfect for soldering tuners,
inverters and similar components.
The HAKKO 456 is ideal for soldering chassis,
dynamos, large harnesses, transformers and
other parts which require a large amount of soldering.
Compact, light weight design with a slender handle for a more comfortable grip.
Rod-type ceramic heater brings high insulation,
and reduces the handle-to-tip distance for faster
soldering with a minimum of movement.
Special alloy heating element is printed in the
alumina ceramic insulating layer and then sintered to the ceramic main body, thus completely
sealing the heating element off from air. This protects the heating element from oxidation, and ensures years of trouble-free use.
Desoldering / Rework
Soldering
Soldering
Soldering Iron
Smoke Absorber / Static Control
Specifications
Model No.
N452
N453
N454
Power Consumption
15W
20W
25W
Standard Tip
N452-T-B (Shape-B)
Heating Element
Insulation Resistance
Total Length (w/o cord)
Weight (w/o cord)
No.602
No.603
No.606
N454-T-B (Shape-B)
Model No.
455
456
Power Consumption
40W
60W
Standard Tip
Ceramic Heater
200MΩ
Recommended Iron Holders
A1047 (Shape-B)
Heating Element
100MΩ
Ceramic Heater
Total Length (w/o cord)
185mm
192mm
47g
57g
215mm
250mm
100g
150g
Weight (w/o cord)
No.633-01
A1023 (Shape-2B)
No.633-01
No.633-02
No.633-02
Replacement Tips
Replacement Tips
Unit : mm
For N452, N453
For 455
A1047 Shape-B
45°
17
17
N452-T-I
Shape-I
N452-T-SC
Shape-SC
ø4
45° 17
ø2
5
13
25
20
25
17
For 456
For N454
A1023 Shape-2B
N454-T-2C
Shape-2C
N454-T-2CF*
A1031 Shape-6C
A1025 Shape-8C
Shape-D
0.8
45°
23
* These tips are tinned on the soldering surface only.
26
ø9
A1032 Shape-K
5
.4
45°
30
22
A1026 Shape-5D
R0
30
20
ø3
20
45°
10
ø4
45°
22
N454-T-D
45°
Shape-I
30
ø5
N454-T-5C
Shape-5C
N454-T-5CF*
23
ø6
4 5°
ø4
4 5°
N454-T-4C
Shape-4C
N454-T-4CF*
ø3
N454-T-3C
Shape-3C
N454-T-3CF*
A1024 Shape-4C
R1
ø2
Shape-B
ø8
R0
.5
20
30
25
1.5
A1053 Shape-K
ø2
1
N454-T-I
45 °
45 °
3
N454-T-B
A1052 Shape-5D
A1051 Shape-6C
17
17
Shape-SD
25
R0
.4
15
0.5
N452-T-SD
17
ø6
Shape-SB
17
45 °
25
7.5
N452-T-SB
45 °
45°
ø0.8
Shape-D
45°
ø3
N452-T-D
N452-T-4C
Shape-4C
N452-T-4CF*
ø3
N452-T-3C
Shape-3C
N452-T-3CF*
25
A1050 Shape-5C
A1049 Shape-4C
45°
15
45 °
8
25
ø4
°
60
N452-T-2C
Shape-2C
N452-T-2CF*
17
ø2
ø1
N452-T-1C
Shape-1C
N452-T-1CF*
A1048 Shape-3C
R0
.5
ø3
Shape-C
ø5
N452-T-C
.5
ø1.5
R0
Shape-B
Unit : mm
Other Tools
Other Tools
N452-T-B
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Specifications
Smoke Absorber / Static Control
Recommended Iron Holders
15
1.5
30
45°
25
30
31
Desoldering / Rework
Both the HAKKO 455·456 incorporate a ceramic
heating element, which provides a longer service
life than conventional nichrome heating element.
Alloy-coated iron tips ensure long-lasting protection from corrosion.
The HAKKO 455 is perfect for soldering tuners,
inverters and similar components.
The HAKKO 456 is ideal for soldering chassis,
dynamos, large harnesses, transformers and
other parts which require a large amount of soldering.
Compact, light weight design with a slender handle for a more comfortable grip.
Rod-type ceramic heater brings high insulation,
and reduces the handle-to-tip distance for faster
soldering with a minimum of movement.
Special alloy heating element is printed in the
alumina ceramic insulating layer and then sintered to the ceramic main body, thus completely
sealing the heating element off from air. This protects the heating element from oxidation, and ensures years of trouble-free use.
Desoldering / Rework
Soldering
Soldering
Soldering Iron
Smoke Absorber / Static Control
Specifications
Model No.
N452
N453
N454
Power Consumption
15W
20W
25W
Standard Tip
N452-T-B (Shape-B)
Heating Element
Insulation Resistance
Total Length (w/o cord)
Weight (w/o cord)
No.602
No.603
No.606
N454-T-B (Shape-B)
Model No.
455
456
Power Consumption
40W
60W
Standard Tip
Ceramic Heater
200MΩ
Recommended Iron Holders
A1047 (Shape-B)
Heating Element
100MΩ
Ceramic Heater
Total Length (w/o cord)
185mm
192mm
47g
57g
215mm
250mm
100g
150g
Weight (w/o cord)
No.633-01
A1023 (Shape-2B)
No.633-01
No.633-02
No.633-02
Replacement Tips
Replacement Tips
Unit : mm
For N452, N453
For 455
A1047 Shape-B
45°
17
17
N452-T-I
Shape-I
N452-T-SC
Shape-SC
ø4
45° 17
ø2
5
13
25
20
25
17
For 456
For N454
A1023 Shape-2B
N454-T-2C
Shape-2C
N454-T-2CF*
A1031 Shape-6C
A1025 Shape-8C
Shape-D
0.8
45°
23
* These tips are tinned on the soldering surface only.
26
ø9
A1032 Shape-K
5
.4
45°
30
22
A1026 Shape-5D
R0
30
20
ø3
20
45°
10
ø4
45°
22
N454-T-D
45°
Shape-I
30
ø5
N454-T-5C
Shape-5C
N454-T-5CF*
23
ø6
4 5°
ø4
4 5°
N454-T-4C
Shape-4C
N454-T-4CF*
ø3
N454-T-3C
Shape-3C
N454-T-3CF*
A1024 Shape-4C
R1
ø2
Shape-B
ø8
R0
.5
20
30
25
1.5
A1053 Shape-K
ø2
1
N454-T-I
45 °
45 °
3
N454-T-B
A1052 Shape-5D
A1051 Shape-6C
17
17
Shape-SD
25
R0
.4
15
0.5
N452-T-SD
17
ø6
Shape-SB
17
45 °
25
7.5
N452-T-SB
45 °
45°
ø0.8
Shape-D
45°
ø3
N452-T-D
N452-T-4C
Shape-4C
N452-T-4CF*
ø3
N452-T-3C
Shape-3C
N452-T-3CF*
25
A1050 Shape-5C
A1049 Shape-4C
45°
15
45 °
8
25
ø4
°
60
N452-T-2C
Shape-2C
N452-T-2CF*
17
ø2
ø1
N452-T-1C
Shape-1C
N452-T-1CF*
A1048 Shape-3C
R0
.5
ø3
Shape-C
ø5
N452-T-C
.5
ø1.5
R0
Shape-B
Unit : mm
Other Tools
Other Tools
N452-T-B
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Specifications
Smoke Absorber / Static Control
Recommended Iron Holders
15
1.5
30
45°
25
30
31
Soldering Iron / Cordless Soldering Iron
The HAKKO PRESTO features two operating
wattages-20W and 130W, which can be switched
by simply pressing a button according to the
component size you want to solder.
The HAKKO PRESTO is available in both pen
and gun types so you can select the type that
best matches your needs.
A Safety cap is available for 984 and 985. You
can put in a toolbox immediately after finishing
soldering work.
Recommended Iron Holders
Specifications
No. 985
No.602
Model No.
500
501
502
503
Power Consumption
20W
30W
40W
60W
Standard Tip
BB3 (ø3mm)
Total Length (w/o cord)
No. 984
197mm
Heating Gun / Glue Gun
205mm
Name/Description
BB3
Black tip ø3mm
238mm
BB4
Black tip ø4mm
70g
BB6
Black tip ø6mm
Various soldering application is available such
as hobby, field service and repair.
Quick & Easy tip replacement.
Various types of batteries are available such
as Alkaline Battery, Nickel-Cadmium Battery,
and Nickel-Hydrogen Battery.
981
984
985
Pen
Gun
Pen
Gun
Safety Cap
20W/130W
Power Consumption
Standard Tip
980-T-B (Shape-B)
Heating Element
No.606
Ceramic Heater
Total Length (w/o cord)
No.633-01
No.633-02
Battery: Selective & Cartridge
Over 100MΩ (20W)
Insulation Resistance
205mm
160mm
205mm
160mm
48g
92g
56g
100g
Weight (w/o cord)
Replacement Tips
Unit : mm
980-T-BC Shape-BC
Specifications
ø2
R0.5
60°
14
17
17
20
Model No.
FX-901
Power Supply
"AA" x 4 pcs.
980-T-D Shape-D
980-T-BI Shape-BI
ø3.5
R0.25
17
1
Continuous Operating Time
Alkaline Batteries: Approx. 60 min.
Nickel-Hydrogen Batteries (2150mAh): Approx. 120 min.
14
17
Power Consumption
Alkaline Batteries: 6V (6W)
Nickel-Hydrogen Batteries (2150mAh): 4.8V (5W)
Standard Tip
T11-B (Shape-B)
Weight (w/o battery)
76g
Total Length (w/o cap)
212mm
* Measurement conditions
When using new batteries. Serviceable time varies depending on battery type.
When the tip temperature is maintained at 300°C or higher.
The operation time was started to measure immediately after powered on.
* When using the batteries except specified above, performance and hours vary.
Packing List
Model Name
Contents
Cordless iron ··························································1
HAKKO FX-901
Cap ········································································1
* Battery is not included.
Replacement Tips
T11-B Shape-B
Unit : mm
T11-D4 Shape-4D
ø4
980-T-B Shape-B
32
Other Tools
980
Type
Replacement Tips
Part No.
Recommended Iron Holders
Model No.
No.603
Heating Gun / Glue Gun
Other Tools
BB6 (ø6mm)
40g
Weight (w/o cord)
Specifications
BB4 (ø4mm)
Nichrome Heater
Heating Element
Smoke Absorber / Static Control
Smoke Absorber / Static Control
No. 981
Ideal for use in a variety of soldering works like
hobbies, repairing electric household appliances.
20W-40W ...
Circuit Boards, small electrical parts, etc.
60W ...
Connectors, heavier wiring connections, etc.
Desoldering / Rework
Desoldering / Rework
No. 980
Soldering
Soldering
Soldering Iron
R0
.2
7.5
0.5
7.5
33
Soldering Iron / Cordless Soldering Iron
The HAKKO PRESTO features two operating
wattages-20W and 130W, which can be switched
by simply pressing a button according to the
component size you want to solder.
The HAKKO PRESTO is available in both pen
and gun types so you can select the type that
best matches your needs.
A Safety cap is available for 984 and 985. You
can put in a toolbox immediately after finishing
soldering work.
Recommended Iron Holders
Specifications
No. 985
No.602
Model No.
500
501
502
503
Power Consumption
20W
30W
40W
60W
Standard Tip
BB3 (ø3mm)
Total Length (w/o cord)
No. 984
197mm
Heating Gun / Glue Gun
205mm
Name/Description
BB3
Black tip ø3mm
238mm
BB4
Black tip ø4mm
70g
BB6
Black tip ø6mm
Various soldering application is available such
as hobby, field service and repair.
Quick & Easy tip replacement.
Various types of batteries are available such
as Alkaline Battery, Nickel-Cadmium Battery,
and Nickel-Hydrogen Battery.
981
984
985
Pen
Gun
Pen
Gun
Safety Cap
20W/130W
Power Consumption
Standard Tip
980-T-B (Shape-B)
Heating Element
No.606
Ceramic Heater
Total Length (w/o cord)
No.633-01
No.633-02
Battery: Selective & Cartridge
Over 100MΩ (20W)
Insulation Resistance
205mm
160mm
205mm
160mm
48g
92g
56g
100g
Weight (w/o cord)
Replacement Tips
Unit : mm
980-T-BC Shape-BC
Specifications
ø2
R0.5
60°
14
17
17
20
Model No.
FX-901
Power Supply
"AA" x 4 pcs.
980-T-D Shape-D
980-T-BI Shape-BI
ø3.5
R0.25
17
1
Continuous Operating Time
Alkaline Batteries: Approx. 60 min.
Nickel-Hydrogen Batteries (2150mAh): Approx. 120 min.
14
17
Power Consumption
Alkaline Batteries: 6V (6W)
Nickel-Hydrogen Batteries (2150mAh): 4.8V (5W)
Standard Tip
T11-B (Shape-B)
Weight (w/o battery)
76g
Total Length (w/o cap)
212mm
* Measurement conditions
When using new batteries. Serviceable time varies depending on battery type.
When the tip temperature is maintained at 300°C or higher.
The operation time was started to measure immediately after powered on.
* When using the batteries except specified above, performance and hours vary.
Packing List
Model Name
Contents
Cordless iron ··························································1
HAKKO FX-901
Cap ········································································1
* Battery is not included.
Replacement Tips
T11-B Shape-B
Unit : mm
T11-D4 Shape-4D
ø4
980-T-B Shape-B
32
Other Tools
980
Type
Replacement Tips
Part No.
Recommended Iron Holders
Model No.
No.603
Heating Gun / Glue Gun
Other Tools
BB6 (ø6mm)
40g
Weight (w/o cord)
Specifications
BB4 (ø4mm)
Nichrome Heater
Heating Element
Smoke Absorber / Static Control
Smoke Absorber / Static Control
No. 981
Ideal for use in a variety of soldering works like
hobbies, repairing electric household appliances.
20W-40W ...
Circuit Boards, small electrical parts, etc.
60W ...
Connectors, heavier wiring connections, etc.
Desoldering / Rework
Desoldering / Rework
No. 980
Soldering
Soldering
Soldering Iron
R0
.2
7.5
0.5
7.5
33
Desoldering / Rework
Desoldering / Rework
Easy one-hand soldering.
Uniform soldering work.
High-accuracy thermal control allows lead-free
soldering.
Thermal capacity can be selected according to
the soldering applications.
Space-saving design.
Trigger operation for easy one-hand soldering.
Quick solder wire replacement with a simple upward push of the trigger.
Solder feed control for precise adjustment of the
amount of solder wire feed to the tip.
<Min: 3mm Max: 8mm>
Simple heating element replacement procedure
requires no special skills.
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Soldering
Soldering
Soldering Gun
* Setting example: HAKKO 958, HAKKO 937 and HAKKO 373.
(HAKKO 937, HAKKO 373 and the iron holder are sold separately.)
Combination Example
Soldering gun
Soldering station
M type : HAKKO 958
Solder-feeding unit
HAKKO 928
HAKKO 373
HAKKO 937
HAKKO 702B
HAKKO 701
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Solder dia.
adjustment ring
* Select one.
Option
Specifications
Model No.
Recommended Iron Holder
582 583
585
587 589
592
Power Consumption 30W 40W
60W
80W 100W
150W
Standard Tip
* For 937 only.
Iron holder No.C1437
Other Tools
Other Tools
* Select one.
582-N-1.6 & 582-N-2.3
Heating Element
Weight (w/o cord)
Mounting plate No.B3270
L type : HAKKO 959
582-T-4 (ø4mm) 585-T-6 (ø6mm) 587-T-8 (ø8mm) 592-T-10 (ø10mm)
Packed in Guide Nozzle
Dimensions (W) x (H)
Spool Holder
Nichrome Heater
197 x 149mm 213 x 149mm 227 x 149mm 241 x 149mm
266g
290g
318g 322g
No.607
No.582-022
* Select one.
380g
* Soldering gun is not included.
Replacement Tips
Part No.
Name/Description
582-T-4
Tip ø4mm
585-T-6
Tip ø6mm
Model No.
587-T-8
Tip ø8mm
Type
592-T-10
Tip ø10mm
Power Consumption
50W (24V)
Temperature Range
200-480°C
Specifications
Packing List
958
959
M
L
Tip to Ground Resistance
Optional Parts
Part No.
Contents
958-01
Soldering gun (HAKKO 958) ······································1
Guide nozzle ······························································3
(ø0.6mm-No.B2652, ø0.8mm-No.B2653, ø1.0mm-No.B2654)
Tube unit S (No.B3268) ·············································1
958-02
Soldering gun (HAKKO 958) ······································1
Guide nozzle ······························································2
(ø1.2mm-No.B2656, ø1.6mm-No.B2655)
Tube unit L (No.B3269) ··············································1
959-01
Soldering gun (HAKKO 959) ······································1
Guide nozzle ······························································3
(ø0.6mm-No.B2652, ø0.8mm-No.B2653, ø1.0mm-No.B2654)
Tube unit S (No.B3268) ·············································1
959-02
Soldering gun (HAKKO 959) ······································1
Guide nozzle ······························································2
(ø1.2mm-No.B2656, ø1.6mm-No.B2655)
Tube unit L (No.B3269) ··············································1
< 2Ω
Tip to Ground Potential
< 2mV (TYP.0.6mV)
Heating Element
Ceramic Heater
Part No.
Name/Description
Standard Tip
582-N-0.8
Guide nozzle/ø0.8mm
Tube Unit
582-N-1.0
Guide nozzle/ø1.0mm
582-N-1.2
Guide nozzle/ø1.2mm
Guide Nozzle
ø0.6, 0.8, 1.0, 1.2, 1.6mm
582-N-1.6
Guide nozzle/ø1.6mm
Usable Solder Dia.
ø0.6, 0.8, 1.0, 1.2, 1.6mm
582-N-2.3
Guide nozzle/ø2.0-2.3mm
Cord
Shape-B (No.900M-T-B) Shape-B (No.900L-T-B)
S: Applicable solder dia. (ø0.6 ~1.0mm)
L : Applicable solder dia. (ø1.2~1.6mm)
1.1m
582-022
Spool holder <Core size 29mm x ø19mm>
Dimensions (w/o cord)
170(W) x 180(H) x 23(D)mm
607
Iron holder
Weight
(w/o cord and tube unit)
177g
187g
* When ordering HAKKO 958 or 959, Please select the suitable model for your using
solder wire diameter.
Replacement Tips
34
Please refer to page 27.
35
Desoldering / Rework
Desoldering / Rework
Easy one-hand soldering.
Uniform soldering work.
High-accuracy thermal control allows lead-free
soldering.
Thermal capacity can be selected according to
the soldering applications.
Space-saving design.
Trigger operation for easy one-hand soldering.
Quick solder wire replacement with a simple upward push of the trigger.
Solder feed control for precise adjustment of the
amount of solder wire feed to the tip.
<Min: 3mm Max: 8mm>
Simple heating element replacement procedure
requires no special skills.
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Soldering
Soldering
Soldering Gun
* Setting example: HAKKO 958, HAKKO 937 and HAKKO 373.
(HAKKO 937, HAKKO 373 and the iron holder are sold separately.)
Combination Example
Soldering gun
Soldering station
M type : HAKKO 958
Solder-feeding unit
HAKKO 928
HAKKO 373
HAKKO 937
HAKKO 702B
HAKKO 701
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Solder dia.
adjustment ring
* Select one.
Option
Specifications
Model No.
Recommended Iron Holder
582 583
585
587 589
592
Power Consumption 30W 40W
60W
80W 100W
150W
Standard Tip
* For 937 only.
Iron holder No.C1437
Other Tools
Other Tools
* Select one.
582-N-1.6 & 582-N-2.3
Heating Element
Weight (w/o cord)
Mounting plate No.B3270
L type : HAKKO 959
582-T-4 (ø4mm) 585-T-6 (ø6mm) 587-T-8 (ø8mm) 592-T-10 (ø10mm)
Packed in Guide Nozzle
Dimensions (W) x (H)
Spool Holder
Nichrome Heater
197 x 149mm 213 x 149mm 227 x 149mm 241 x 149mm
266g
290g
318g 322g
No.607
No.582-022
* Select one.
380g
* Soldering gun is not included.
Replacement Tips
Part No.
Name/Description
582-T-4
Tip ø4mm
585-T-6
Tip ø6mm
Model No.
587-T-8
Tip ø8mm
Type
592-T-10
Tip ø10mm
Power Consumption
50W (24V)
Temperature Range
200-480°C
Specifications
Packing List
958
959
M
L
Tip to Ground Resistance
Optional Parts
Part No.
Contents
958-01
Soldering gun (HAKKO 958) ······································1
Guide nozzle ······························································3
(ø0.6mm-No.B2652, ø0.8mm-No.B2653, ø1.0mm-No.B2654)
Tube unit S (No.B3268) ·············································1
958-02
Soldering gun (HAKKO 958) ······································1
Guide nozzle ······························································2
(ø1.2mm-No.B2656, ø1.6mm-No.B2655)
Tube unit L (No.B3269) ··············································1
959-01
Soldering gun (HAKKO 959) ······································1
Guide nozzle ······························································3
(ø0.6mm-No.B2652, ø0.8mm-No.B2653, ø1.0mm-No.B2654)
Tube unit S (No.B3268) ·············································1
959-02
Soldering gun (HAKKO 959) ······································1
Guide nozzle ······························································2
(ø1.2mm-No.B2656, ø1.6mm-No.B2655)
Tube unit L (No.B3269) ··············································1
< 2Ω
Tip to Ground Potential
< 2mV (TYP.0.6mV)
Heating Element
Ceramic Heater
Part No.
Name/Description
Standard Tip
582-N-0.8
Guide nozzle/ø0.8mm
Tube Unit
582-N-1.0
Guide nozzle/ø1.0mm
582-N-1.2
Guide nozzle/ø1.2mm
Guide Nozzle
ø0.6, 0.8, 1.0, 1.2, 1.6mm
582-N-1.6
Guide nozzle/ø1.6mm
Usable Solder Dia.
ø0.6, 0.8, 1.0, 1.2, 1.6mm
582-N-2.3
Guide nozzle/ø2.0-2.3mm
Cord
Shape-B (No.900M-T-B) Shape-B (No.900L-T-B)
S: Applicable solder dia. (ø0.6 ~1.0mm)
L : Applicable solder dia. (ø1.2~1.6mm)
1.1m
582-022
Spool holder <Core size 29mm x ø19mm>
Dimensions (w/o cord)
170(W) x 180(H) x 23(D)mm
607
Iron holder
Weight
(w/o cord and tube unit)
177g
187g
* When ordering HAKKO 958 or 959, Please select the suitable model for your using
solder wire diameter.
Replacement Tips
34
Please refer to page 27.
35
Reducing flux splashing and solder balls gene
rated during soldering operation.
Compact design to save work bench.
Can be installed to your solder reel stand.
Desoldering / Rework
Smoke Absorber / Static Control
2
3
400
Tube Unit
Feeder Pen
200
Feeder Pen
100
Foot Switch
Guide Pipe
Assembly
Guide Pipe
Assembly
HAKKO FM-203
HAKKO MACH-I
Normal
solder
350°C
Foot Switch
Grooved
solder
Normal
solder
400°C
• Test criteria
Feed ø1.0 x 500 mm of lead-free solder (Sn-3Ag-0.5Cu) to one of our soldering irons,
which has tip temperature setting at 350 and 400°C and measure the amount of flux
splashing. The effects of flux splashing prevention may differ under different test criteria.
HAKKO FX-951
HAKKO 937*
HAKKO DASH
Specifications
Packing List
373
Power Consumption
6W
Motor Output
DC 24V, 3.2W
Model No.
375
0-7sec. (Auto Mode)
Rating
DC24V 75mA
4.5-26mm/sec.
Motor rating
DC24V 130mA
Solder Feed Q´ty
0-182mm (Auto Mode)
Dimensions
76(W) x 96(H) x 50(D)mm
Solder Return Q´ty
0-5mm
Weight (w/o cord)
590g
Usable Solder Dia.
ø0.6, 0.65, 0.8, 1.0, 1.2, 1.6mm*
Usable Solder
1kg roll bobbin (Max.)
Dimensions
107(W) x 110(H) x 215(D)mm
Weight (w/o cord)
1.5kg
Solder Feed Speed
* ø1.6mm ''Lead-free solder'' is not available for use.
HAKKO 928*
Set Up
Grooved
solder
Other Tools
HAKKO FX-950
Feeder Switch
0
Model No.
Solder Feed Time
HAKKO FX-888
Amount of flux splashing
( quantity of dots )
Specifications
Other Tools
Compatible Soldering Iron
HAKKO FX-838
(Iron: FX-8301)
Heating Gun / Glue Gun
Solder Dia.
Adjustment Ring
Flux
300
Tube Unit
for MACH-I
HAKKO 373
Cross Section of Solder
Solder
4
Smoke Absorber / Static Control
Effects of Using Cut Solder
1
Heating Gun / Glue Gun
Desoldering / Rework
Can be used with a wide range of Hakko brand
soldering irons, permitting selection of the most
appropriate iron for the task at hand. If you already own one of these compatible Hakko soldering irons, you won't need to buy another.
ESD design helps protect electrically sensitive
parts.
Can be connected to simple soldering equipment
by using a switching jack.
Adjustable solder return function reduces waste,
permits fully automatic soldering.
Set Up
Soldering
Soldering
Self Feeder
Model Name Contents
HAKKO 375
Unit ·············································································1
AC adapter ·································································1
AC adapter
Rating
DC24V 250mA
Optional Parts
Part No.
Name
B1649
Foot switch
B2763
Hand switch
No.B1649
No.B2763
HAKKO 958 · 959
* 900S soldering iron is not compatible with HAKKO 373.
36
37
Reducing flux splashing and solder balls gene
rated during soldering operation.
Compact design to save work bench.
Can be installed to your solder reel stand.
Desoldering / Rework
Smoke Absorber / Static Control
2
3
400
Tube Unit
Feeder Pen
200
Feeder Pen
100
Foot Switch
Guide Pipe
Assembly
Guide Pipe
Assembly
HAKKO FM-203
HAKKO MACH-I
Normal
solder
350°C
Foot Switch
Grooved
solder
Normal
solder
400°C
• Test criteria
Feed ø1.0 x 500 mm of lead-free solder (Sn-3Ag-0.5Cu) to one of our soldering irons,
which has tip temperature setting at 350 and 400°C and measure the amount of flux
splashing. The effects of flux splashing prevention may differ under different test criteria.
HAKKO FX-951
HAKKO 937*
HAKKO DASH
Specifications
Packing List
373
Power Consumption
6W
Motor Output
DC 24V, 3.2W
Model No.
375
0-7sec. (Auto Mode)
Rating
DC24V 75mA
4.5-26mm/sec.
Motor rating
DC24V 130mA
Solder Feed Q´ty
0-182mm (Auto Mode)
Dimensions
76(W) x 96(H) x 50(D)mm
Solder Return Q´ty
0-5mm
Weight (w/o cord)
590g
Usable Solder Dia.
ø0.6, 0.65, 0.8, 1.0, 1.2, 1.6mm*
Usable Solder
1kg roll bobbin (Max.)
Dimensions
107(W) x 110(H) x 215(D)mm
Weight (w/o cord)
1.5kg
Solder Feed Speed
* ø1.6mm ''Lead-free solder'' is not available for use.
HAKKO 928*
Set Up
Grooved
solder
Other Tools
HAKKO FX-950
Feeder Switch
0
Model No.
Solder Feed Time
HAKKO FX-888
Amount of flux splashing
( quantity of dots )
Specifications
Other Tools
Compatible Soldering Iron
HAKKO FX-838
(Iron: FX-8301)
Heating Gun / Glue Gun
Solder Dia.
Adjustment Ring
Flux
300
Tube Unit
for MACH-I
HAKKO 373
Cross Section of Solder
Solder
4
Smoke Absorber / Static Control
Effects of Using Cut Solder
1
Heating Gun / Glue Gun
Desoldering / Rework
Can be used with a wide range of Hakko brand
soldering irons, permitting selection of the most
appropriate iron for the task at hand. If you already own one of these compatible Hakko soldering irons, you won't need to buy another.
ESD design helps protect electrically sensitive
parts.
Can be connected to simple soldering equipment
by using a switching jack.
Adjustable solder return function reduces waste,
permits fully automatic soldering.
Set Up
Soldering
Soldering
Self Feeder
Model Name Contents
HAKKO 375
Unit ·············································································1
AC adapter ·································································1
AC adapter
Rating
DC24V 250mA
Optional Parts
Part No.
Name
B1649
Foot switch
B2763
Hand switch
No.B1649
No.B2763
HAKKO 958 · 959
* 900S soldering iron is not compatible with HAKKO 373.
36
37
Enables you to perform temperature control
surely and easily, which is essential during leadfree soldering.
Desoldering / Rework
Part No.
Name/Description
Thermometer ·························································1
191-212
Sensor/10 pcs
HAKKO FG-100 006P 9V battery ·····················································1
A1310
Temperature probe for solder in pots
Sensor ·································································10
C1220
Temperature probe for automatic solder machine
Soldering tester ······················································1
C1541
Temperature probe for hot air
Fuse ·······································································1
Conduction wire ·····················································1
HAKKO FG-101 Multi-adapter ··························································1
Ground clip ····························································1
Power cord ····························································1
Sensor ·································································10
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Contents
Desoldering / Rework
Suitable for Lead-Free solder:–
Quick and accurate tip temperature measurement using a fine CA wire sensor (Dia.0.2mm)
Disposable sensor always maintains accurate
temperature measurement.
Sensor has twice service life of conventional one.
MAX HOLD function
Auto shutoff function
Compact size
Replacement and Optional Parts
Packing List
Model Name
Soldering
Soldering
Thermometer / Soldering Tester
Temperature Probe
3-Dimensional Measurement
For measuring the temperature of solder in pots, automatic solder machine and hot air.
Allows you to measure from any desired
direction according to tip shape.
For Solder in Pots
For Automatic Solder Machine
Dimensions
190mm
Dimensions
60mm
24mm
1000mm
ø3.2mm
54mm
No.A1310
Other Tools
No.C1220
Sensor A
Sensor A is primarily used to measure the temperature of hot air.
Sensor A
Sensor B
Sensor B is primarily used to measure the temperature of works.
Sensor B
No.C1541
HAKKO FG -100
HAKKO FG -101
1°C
0-700°C
K (CA) type thermocouple
±3°C (between 300 and 600°C)
Besides measured temperatures, display
indications include the following:
Burnout alarm*2
Display
Battery
low alarm*1
Power Supply
Outline dimensions
Weight
Ambient temperature/humidity range
006P 9V dry battery (alkaline cell recommended)
68(W) x 140(H) x 38(D)mm (excluding protrusions)
115g (excluding battery)
0-40°C, 20-90%RH, without condensation
Applicable rated pollution degree 2
(According to IEC/UL61010-1)
MAX HOLD
*1 When B appears, be sure to replace the battery.
Failure to do so will result in incorrect temperature measurements.
*2 This alarm indicates a sensor burnout. If this alarm occurs,
replace the sensor.
38
How to use 2 Hot Air (SMD-BGA Repair System)
1~2mm
Specifications
Environmental Condition
30mm
For Hot Air
How to use 1 Hot Air (FR-803B)
Resolution
Temperature measurement range
Applicable sensor
Measurement tolerance
1000mm
Other Tools
Tip temperature, leak voltage and ground resistance of soldering irons can be measured.
Soldering irons can be controlled based on the
MIL-HDBK-263B standard.
Soldering irons can be controlled based on the
IPC J-STD.
MAX HOLD function.
Leak voltage and ground resistance can be easily measured.
89mm
Sleeve
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Sheath
Resolution
Measurement Range
Temperature
Voltage
Resistance
Display
Power Consumption
Dimensions
Weight
Ambient Temperature/
Humidity Range
Environmental Condition
Precision
1°C
0-700°C*1
±3°C (between 300 and 600°C)
±5°C (other than above)
K (CA) type thermocouple
0.1mV
0 to 40mV (AC)
±(5% of reading +1 digit)
0.1Ω
0 to 40Ω
±(5% of reading +1 digit)
3 1/2 digits
Sensor
Resolution
Measurement Range
Precision
Resolution
Measurement Range
Precision
LCD
Over Range*2
Burnout*3
MAX HOLD
Shown as "MAX HOLD" in the lower right on the display
100V-2.6W, 110V-2.9W, 120V-2.6W, 220V-2.7W, 230V-2.8W, 240V-3.0W
200(W) x 50(H) x 120(D)mm
1kg
How to use 3 Works
1~2mm
0-40°C, 20-90%RH (Non condensing)
Applicable rated pollution degree 2 (According to IEC/UL61010-1)
*1 Temperature sensor (No.191-212) can only be used to measure temperatures below 500°C. To
measure higher temperature, use an applicable temperature probe.
*2 An Over Range alarm occurs during temperature measurement when the temperature sensor is
not attached, and during voltage and resistance measurement when the tip is not in contact
with the conduction plate.
*3 When a sensor burns out, the same alarm symbol as the one for Over Range alarm is also displayed. If this alarm occurs, replace the sensor.
39
Soldering Pot
Specifications
Packing List
195W
Weight (w/o solder & cord)
1.7kg
Temperature Range
50 x 50 Square
75 x 75 Square
200-450°C
200-380°C
Molten Solder Capacity
0.85kg
Temperature Probe
Replacement and Optional Parts
Part No.
Name/Description
A1517
Solder pot/50 x 50mm
A1518
Solder pot/75 x 75mm
A1539*
Solder pot/50 x 50mm Special coating for long life
A1540*
Solder pot/75 x 75mm Special coating for long life
Part No.
Name/Description
A1310
Temperature probe for solder in pots
* For further details, refer to
page 39.
* A special coating is applied to increase the corrosion resistance of the solder pot and
provide extended life. The corrosion resistance test shows that the life of this solder
pot is more than 5 times longer compared to that of the standard pot. This pot is
compatible with both lead-free and tin-lead soldering.
The data are based on our comparison test. actual life varies depending on the use conditions.
Dimensions of Solder Pot
96
50 x 50 square
70mm
200W
50mm
50mm
Ceramic Heater
Dimensions
135(W) x 107(H) x 222(D)mm 135(W) x 117(H) x 222(D)mm
Weight (w/o cord)
Temperature
Insulation Resistance
1.5kg
1.6kg
100-450°C
100-380°C
Over 100MΩ (250°C)
FX-300
FX-301B
Dimension of Solder Pot
50(W) x 54(H) x 50(D)mm
70(W) x 64(H) x 70(D)mm
Analog
Digital
Molten Solder Capacity
0.85kg
1.2kg
30mm
Parameter setting
Offset function
Timer function
Standard pot/Special coating pot (50mm square and 75mm square)
40
70 x 70 square
Four heating programs
7mm
Power Consumption
Heating Element
Performance comparison table
96-1
64mm
Model No.
32mm
52.5mm
Specifications
22mm
10mm
□ 47.4mm
24mm
15mm
43.5mm
Hexagon wrench ················································1
Large-capacity solder pot holds a larger amount of
solder, the solder temperature remains high even during continuous soldering operations.
The stainless steel solder pot and other heavy-duty
components offer greater durability, while the solder
overflow prevention rim around the pot provides greater safety.
The raised rim around the
pot enhances soldering and
desoldering efficiency.
A waste collector adds a final tough of operating ease
and efficiency.
Replace the pot and retighten the screws.
Analog/Digital type
J-shaped waste collector ····································1
* Only a 50 x 50 square solder pot is included in this product.
* The 75 x 75 square solder pot is an optional part.
Other Tools
Loosen the screws on both sides of the pot.
Spatula ·······························································1
Other Tools
□ 47.4mm
HAKKO FX-300
1.2kg
□ 75mm
□ 50mm
J-shaped waste collector ····································1
Unit ·····································································1
50(W) x 43.5(H) x 50(D)mm 75(W) x 52.5(H) x 75(D)mm
Dimensions
75 x 75 square
□ 50mm
Spatula ·······························································1
Hexagon wrench ················································1
Soldering Pot
Dimensions of Solder Pot
50 x 50 square
HAKKO FX-301B
143(W) x 100(H) x 220(D)mm
Dimensions
Contents
Unit ·····································································1
Heating Gun / Glue Gun
Easy Pot Replacement
Model Name
54mm
Soldering
Desoldering / Rework
Smoke Absorber / Static Control
FX-300
200W
Smoke Absorber / Static Control
Heating Gun / Glue Gun
FX-301B
Desoldering / Rework
Analog type
Easy pot replacement.
– Use different pots for different composition solder,
or different pot sizes (50 mm square and 75 mm
square) with the same unit.
Special coating pot for long life. (Option)
Power Consumption
Soldering
Model No.
Digital type
Easy pot replacement.
Selectable heating programs allows to get optimum
temperature quickly.
Select from four heating programs: Sn-Pb (Tin/Lead),
Sn-Ag-Cu (Tin/Silver/Copper), Sn-Cu (Tin/Copper), and
Sn (Tin).
Special coating pot for long life as standard.
Precise temperature control by digital temperature
display & offset function.
A timer function helps you keep tabs on how long the
soldering pot has been in use, making it easy to judge
the time for pot replacement.
30mm
Packing List
Model Name
HAKKO 96
Contents
Unit ·····································································1
Spatula ·······························································1
41
Tip Cleaner
Desoldering / Rework
Smoke Absorber / Static Control
Solder-splashing prevention
Compatible with various HAKKO soldering irons and tips
The encapsulated design prevents solder from splashing during tip cleaning, which could become a significant cause of failure.
A suitable receptacle can be selected and the height
can be adjusted according to the soldering iron and tip
to be used.
Smoke Absorber / Static Control
Operation
Prevents from solder splashing and tip oxidation.
Compatible with various HAKKO soldering irons
and tips.
Controls the amount of solder to be left on tips.
Minimizes the drop of tip temperature
Easy to maintain
ESD safe (A ground wire is not included)
Silent design
Desoldering / Rework
Compact and high performance soldering system
developed for soldering and desoldering components and connectors mounted on circuit boards.
The solder flow is both temperature controlled
and time controlled.
Many different nozzle sizes are available.
Soldering and desoldering cycles are automatic
and precise.
A built-in locator light pinpoints the exact position
for component placement.
Solder remaining in the through hole is completely removed by utilizing the air unit.
Soldering
Soldering
Soldering System
Applicable table
Applicable tip
Receptacle A
Receptacle B
Receptacle C
T12, T11
T18, 900M, T14
Because the housing is encapsulated, solder does not splash.
Specifications
Packing List
Controllable degree of solder removal
Model Name
Model No.
485
Input Voltage
AC100V 50/60Hz
Power Consumption
850W
Main unit (No.485-1) ··························································1
Air Unit (No.486) ·······························································1
Nozzle (No.485-N-01~04) ··········································1 each
Main Unit
485-1
IC tweezers ·····································································1
Room Temperature
-5~400°C
Anti-oxidizer ·····································································1
Temperature Range
Normal Temperature-229°C
Capacity of Solder Bath
10kg
Heating Element
800W (400W x 2)
Dimensions
500(W) x 245(H) x 550(D)mm
Weight (w/o cord)
35kg w/o Solder
HAKKO 485
Spatula ···········································································1
Lamp (6V-10V) ·································································1
Brush
Cleaning brush A
(Standard accessory)
Material
Cleaning brush B
(Optional)
Resin
Metal
Solder slightly remains
Positionning board ····························································1
Waste collector ·································································1
Locator light ·····································································1
Foot switch ······································································1
Solder is fully removed
Image
after
cleaning
486
Part No.
Dimensions
2
196-686kPa (2-7kgf/cm )
Air Pressure
Dimensions
150(W) x 100(H) x 300(D)mm
Weight (w/o cord)
3.5kg
Benefit
Replacement Parts
Unit : mm
Inner Dia.
245mm
Air Hood
Part No.
Remove the plug of the
adapter.
Hold the cover and remove
it from the base.
Horizontal gauge ······························································1
Air Unit
42
The metallic waste collector enables you to clean easily.
In addition, the driving parts are isolated from other
parts, which prevents solder waste from entering.
Air hood (No.485-28~31) ···········································1 each
Part No.
Nozzle
Part No.
Two types of cleaning brushes are available.
Selection of brushes can control the amount of solder
to be left.
Easy to maintain
Unit : mm
280mm
Prevents tip from being
oxidized and extends
service life of tip
Combines the best properties of a cleaning sponge
and cleaning wire (HAKKO 599B).
80mm
Inner Dia.
485-N-01
21 x 11
485-28
21 x 10
485-N-02
26 x 11
485-29
25 x 10
485-N-03
38 x 18
485-30
34 x 17
485-N-04
54 x 19
485-31
52 x 17
485-N-11
55 x 7
485-32
51 x 7
485-N-12
68 x 7
485-33
64 x 7
485-N-13
81 x 7
485-34
77 x 7
485-N-14
30 x 30
485-35
30 x 30
485-N-15
50 x 50
485-36
50 x 50
485-N-16
11 x 21 Cross
485-N-17
11 x 26 Cross
485-N-18
485-N-19
Suitable for soldering to
a tiny section which
requires control of
solder amount
B
500mm
550mm
leaves less solder
A
leaves more solder
Sponge
599B
110mm
A : FT-710 with cleaning brush <A>
Pick up the waste collector
from the base and throw
away solder accumulated
on the waste collector.
Specifications
Model No.
HAKKO FT-710
Motor Rating
DC24V 50mA
Power Consumption
5W
Standby Power Consumption 0.6W
Dimensions
71(W) x 77(H) x 107(D)mm
Weight
450g
Brush Rotational Speed 2500rpm
AC adapter
Rating
DC24V 130mA
Dimensions
45(W) x 40(H) x 65(D)mm
Weight
0.25kg
Replacement and Optional Parts
B : FT-710 with cleaning brush <B>
Part No.
Name/Description
A1566
Cleaning brush A/set of 2
A1567
Cleaning brush B/set of 2
Contents
B3520
Pulley belt
HAKKO FT-710 (With cleaning brush A and solder waste collector)···1
B3521
Solder waste collector
Receptacle (No.3517, B3518) ··································2
B3523
Lock nut
Lock nut ····································································1
18 x 38 Cross
B3517
Receptacle A
AC adapter ·······························································1
19 x 54 Cross
B3518
Receptacle B
Gauge ·······································································1
B3519
Receptacle C
Packing List
Model Name
Hakko FT-710
Other Tools
Other Tools
Contents
Heating Gun / Glue Gun
Heating Gun / Glue Gun
T10, T20, T13, T17
*This cleaner cannot be used for shape of 0.2JL, quad type, tunnel type, spatula type of the
T12 series.
*There are some tips with dimensions that cannot be adjusted with the standard receptacles.
In this case, please consult with your nearby dealer or distributor.
43
Tip Cleaner
Desoldering / Rework
Smoke Absorber / Static Control
Solder-splashing prevention
Compatible with various HAKKO soldering irons and tips
The encapsulated design prevents solder from splashing during tip cleaning, which could become a significant cause of failure.
A suitable receptacle can be selected and the height
can be adjusted according to the soldering iron and tip
to be used.
Smoke Absorber / Static Control
Operation
Prevents from solder splashing and tip oxidation.
Compatible with various HAKKO soldering irons
and tips.
Controls the amount of solder to be left on tips.
Minimizes the drop of tip temperature
Easy to maintain
ESD safe (A ground wire is not included)
Silent design
Desoldering / Rework
Compact and high performance soldering system
developed for soldering and desoldering components and connectors mounted on circuit boards.
The solder flow is both temperature controlled
and time controlled.
Many different nozzle sizes are available.
Soldering and desoldering cycles are automatic
and precise.
A built-in locator light pinpoints the exact position
for component placement.
Solder remaining in the through hole is completely removed by utilizing the air unit.
Soldering
Soldering
Soldering System
Applicable table
Applicable tip
Receptacle A
Receptacle B
Receptacle C
T12, T11
T18, 900M, T14
Because the housing is encapsulated, solder does not splash.
Specifications
Packing List
Controllable degree of solder removal
Model Name
Model No.
485
Input Voltage
AC100V 50/60Hz
Power Consumption
850W
Main unit (No.485-1) ··························································1
Air Unit (No.486) ·······························································1
Nozzle (No.485-N-01~04) ··········································1 each
Main Unit
485-1
IC tweezers ·····································································1
Room Temperature
-5~400°C
Anti-oxidizer ·····································································1
Temperature Range
Normal Temperature-229°C
Capacity of Solder Bath
10kg
Heating Element
800W (400W x 2)
Dimensions
500(W) x 245(H) x 550(D)mm
Weight (w/o cord)
35kg w/o Solder
HAKKO 485
Spatula ···········································································1
Lamp (6V-10V) ·································································1
Brush
Cleaning brush A
(Standard accessory)
Material
Cleaning brush B
(Optional)
Resin
Metal
Solder slightly remains
Positionning board ····························································1
Waste collector ·································································1
Locator light ·····································································1
Foot switch ······································································1
Solder is fully removed
Image
after
cleaning
486
Part No.
Dimensions
2
196-686kPa (2-7kgf/cm )
Air Pressure
Dimensions
150(W) x 100(H) x 300(D)mm
Weight (w/o cord)
3.5kg
Benefit
Replacement Parts
Unit : mm
Inner Dia.
245mm
Air Hood
Part No.
Remove the plug of the
adapter.
Hold the cover and remove
it from the base.
Horizontal gauge ······························································1
Air Unit
42
The metallic waste collector enables you to clean easily.
In addition, the driving parts are isolated from other
parts, which prevents solder waste from entering.
Air hood (No.485-28~31) ···········································1 each
Part No.
Nozzle
Part No.
Two types of cleaning brushes are available.
Selection of brushes can control the amount of solder
to be left.
Easy to maintain
Unit : mm
280mm
Prevents tip from being
oxidized and extends
service life of tip
Combines the best properties of a cleaning sponge
and cleaning wire (HAKKO 599B).
80mm
Inner Dia.
485-N-01
21 x 11
485-28
21 x 10
485-N-02
26 x 11
485-29
25 x 10
485-N-03
38 x 18
485-30
34 x 17
485-N-04
54 x 19
485-31
52 x 17
485-N-11
55 x 7
485-32
51 x 7
485-N-12
68 x 7
485-33
64 x 7
485-N-13
81 x 7
485-34
77 x 7
485-N-14
30 x 30
485-35
30 x 30
485-N-15
50 x 50
485-36
50 x 50
485-N-16
11 x 21 Cross
485-N-17
11 x 26 Cross
485-N-18
485-N-19
Suitable for soldering to
a tiny section which
requires control of
solder amount
B
500mm
550mm
leaves less solder
A
leaves more solder
Sponge
599B
110mm
A : FT-710 with cleaning brush <A>
Pick up the waste collector
from the base and throw
away solder accumulated
on the waste collector.
Specifications
Model No.
HAKKO FT-710
Motor Rating
DC24V 50mA
Power Consumption
5W
Standby Power Consumption 0.6W
Dimensions
71(W) x 77(H) x 107(D)mm
Weight
450g
Brush Rotational Speed 2500rpm
AC adapter
Rating
DC24V 130mA
Dimensions
45(W) x 40(H) x 65(D)mm
Weight
0.25kg
Replacement and Optional Parts
B : FT-710 with cleaning brush <B>
Part No.
Name/Description
A1566
Cleaning brush A/set of 2
A1567
Cleaning brush B/set of 2
Contents
B3520
Pulley belt
HAKKO FT-710 (With cleaning brush A and solder waste collector)···1
B3521
Solder waste collector
Receptacle (No.3517, B3518) ··································2
B3523
Lock nut
Lock nut ····································································1
18 x 38 Cross
B3517
Receptacle A
AC adapter ·······························································1
19 x 54 Cross
B3518
Receptacle B
Gauge ·······································································1
B3519
Receptacle C
Packing List
Model Name
Hakko FT-710
Other Tools
Other Tools
Contents
Heating Gun / Glue Gun
Heating Gun / Glue Gun
T10, T20, T13, T17
*This cleaner cannot be used for shape of 0.2JL, quad type, tunnel type, spatula type of the
T12 series.
*There are some tips with dimensions that cannot be adjusted with the standard receptacles.
In this case, please consult with your nearby dealer or distributor.
43
Iron Holder / Solder Reel Stand
Removes oxides without damaging the tip.
Does not contain any diammonium phosphate,
so it is safe to tip, P.W.B., operator and global
environment.
Energy-saving design consumes only 4.5W.
Specifications
Model No.
Desoldering / Rework
Before cleaning
No.603
No.606
After cleaning
Weight
65g
65 x 45 x 15mm
92(W) x 108(D)mm
80g
603
70 x 70 x 15mm
82(W) x 95(D)mm
500g
606
65 x 45 x 15mm
(w/Alminum Case)
100(W) x 160(D)mm
310g
607
70 x 70 x 15mm
98(W) x 166(D)mm
600g
633-01
ø70 x 71(H)mm
84(W) x 186(D)mm
380g
633-02
ø70 x 15mm
84(W) x 186(D)mm
340g
602
No.602
Dimensions
ø70 x 71(H)mm
Desoldering / Rework
No. FS-100
Dimensions of Cleaner
599B*
No.599B
No. FT-700
Soldering
Soldering
Tip Polisher, Chemical Paste
HAKKO 599B*
A simple procedure that's easy to learn.
Use the brush to remove tough oxide.
No.607
No.633-01
No.633-02
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Use the accessory brush to remove tough oxides. The
procedure is as follows: First, remove the oxide using
the brush. Second, clean the tip using the tip polisher.
• Replacement cartridge for HAKKO 633.
• No water required.
• Helps your lead-free solder application.
FS-100
1 Place the tip of the solder-
plating using
chemical paste FS-100.
2 Re-solder
ing iron onto the spinning
brush of the tip polisher for
several seconds to remove
oxides.
Brush
*There is another way to solder
plating is that apply the using
soldering wire to the tip.
No. 611-1
Heating Gun / Glue Gun
Heating Gun / Glue Gun
ESD safe by design.
Keep your bench neat.
Draw out the solder wire smoothly.
No. 611-2
Specifications
Dimensions
3 Wipe the FS-100 remaining
4 Apply and melt wire solder
cleanly off the tip before
start soldering work.
on the tip before start soldering work.
FT-700
Model No.
Usable Solder
44
ø15mm
1kg roll bobbin (Max.) x 1
1kg roll bobbin (Max.) x 2
550g
750g
Packing List
FT-700
Power Consumption
100V 3W, 110-120V 4.5W, 220-240V 4.5W
Dimensions
70(W) x 54(H) x 101(D)mm
Weight (w/o cord)
650g
FS-100
Model No.
611-2
87(W) x 200(H) x 141(D)mm
Shaft Dia.
Weight
Specifications
611-1
86(W) x 114(H) x 78(D)mm
Other Tools
Other Tools
Part No.
Model Name
Contents
Tip polisher ··································································1
HAKKO FT-700
Chemical paste ·····························································1
Brush ··········································································1
FS-100
Amount
10g
Contents
Flux paste, tin
Dimensions
ø34 x 9(H)mm
45
Iron Holder / Solder Reel Stand
Removes oxides without damaging the tip.
Does not contain any diammonium phosphate,
so it is safe to tip, P.W.B., operator and global
environment.
Energy-saving design consumes only 4.5W.
Specifications
Model No.
Desoldering / Rework
Before cleaning
No.603
No.606
After cleaning
Weight
65g
65 x 45 x 15mm
92(W) x 108(D)mm
80g
603
70 x 70 x 15mm
82(W) x 95(D)mm
500g
606
65 x 45 x 15mm
(w/Alminum Case)
100(W) x 160(D)mm
310g
607
70 x 70 x 15mm
98(W) x 166(D)mm
600g
633-01
ø70 x 71(H)mm
84(W) x 186(D)mm
380g
633-02
ø70 x 15mm
84(W) x 186(D)mm
340g
602
No.602
Dimensions
ø70 x 71(H)mm
Desoldering / Rework
No. FS-100
Dimensions of Cleaner
599B*
No.599B
No. FT-700
Soldering
Soldering
Tip Polisher, Chemical Paste
HAKKO 599B*
A simple procedure that's easy to learn.
Use the brush to remove tough oxide.
No.607
No.633-01
No.633-02
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Use the accessory brush to remove tough oxides. The
procedure is as follows: First, remove the oxide using
the brush. Second, clean the tip using the tip polisher.
• Replacement cartridge for HAKKO 633.
• No water required.
• Helps your lead-free solder application.
FS-100
1 Place the tip of the solder-
plating using
chemical paste FS-100.
2 Re-solder
ing iron onto the spinning
brush of the tip polisher for
several seconds to remove
oxides.
Brush
*There is another way to solder
plating is that apply the using
soldering wire to the tip.
No. 611-1
Heating Gun / Glue Gun
Heating Gun / Glue Gun
ESD safe by design.
Keep your bench neat.
Draw out the solder wire smoothly.
No. 611-2
Specifications
Dimensions
3 Wipe the FS-100 remaining
4 Apply and melt wire solder
cleanly off the tip before
start soldering work.
on the tip before start soldering work.
FT-700
Model No.
Usable Solder
44
ø15mm
1kg roll bobbin (Max.) x 1
1kg roll bobbin (Max.) x 2
550g
750g
Packing List
FT-700
Power Consumption
100V 3W, 110-120V 4.5W, 220-240V 4.5W
Dimensions
70(W) x 54(H) x 101(D)mm
Weight (w/o cord)
650g
FS-100
Model No.
611-2
87(W) x 200(H) x 141(D)mm
Shaft Dia.
Weight
Specifications
611-1
86(W) x 114(H) x 78(D)mm
Other Tools
Other Tools
Part No.
Model Name
Contents
Tip polisher ··································································1
HAKKO FT-700
Chemical paste ·····························································1
Brush ··········································································1
FS-100
Amount
10g
Contents
Flux paste, tin
Dimensions
ø34 x 9(H)mm
45
Smoke Absorber / Static Control
Heating Gun / Glue Gun
HAKKO FM-204 (w/MODEL FM-2024, Nozzle ø1.0mm)
HAKKO 474 (w/HAKKO 809, Nozzle ø1.0mm)
Temp.(°C)
450
Sleep function
Approx. 30 sec.
Approx. 100 sec.
350
300
76 sec.
250
104 sec.
Contents
Model Name
Power Consumption
120W
Station ······························································1
Temperature Range
200-450°C
Desoldering tool (MODEL FM-2024) ···············1
Temperature Stability
±5°C at idle temperature
Control card ·····················································1
Power cord ·······················································1
Station
Output
24V
Connecting cable ·············································1
Dimensions
160(W) x 120(H) x 225(D)mm
Ceramic paper filter········································10
Weight
3.7kg
Vacuum Generator
Vacuum pump, double cylinder type
(Originally equipped x 1, additional replacement x 1) ·····2
Vacuum Pressure (Max.)
80kPa (600mmHg)
Handle (for gun configuration) ·························1
Suction Flow
15 /min
Nozzle remover ················································1
Filter pipe assembly
HAKKO FM-204
Iron holder with 599B tip cleaner
MODEL FM-2024 Desoldering Tool
(No.FH200-05) ·················································1
Power Consumption
70W (24V)
Temperature Range
350-450°C
Nozzle to Ground Resistance
< 2Ω
Nozzle to Ground Potential
< 2mV
Total Length (w/o cord)
180mm with ø1.0 nozzle
Weight (w/o cord & hose)
65g with ø1.0 nozzle
Cord
1.2m
Cleaning drill ····················································1
* Nozzle is an optional part.
Increase your options
The FM-204 is a desoldering station as standard, but it
can be operated with optional FM-2027 and FM-2026
soldering handpieces.
A single station plays multiple roles: soldering and desoldering.
Replacement and Optional Parts
Part No.
Name/Description
FM2024-02
MODEL FM-2024 24V/70W
A1514
Ceramic paper filter/10 pcs
A1512
Front holder
A1511
Filter pipe assembly
B3253
Connecting cable
FM2027-03*
HAKKO FM-2027 Conversion kit
FM2026-04*
HAKKO FM-2026 Conversion kit
Soldering
N2 System
Other Tools
Other Tools
400
After the iron is inserted into
the iron holder, the sleep
function activates after a
user-settable time (0 to 29
min.) and the tip temperature
will decrease to approximately 200°C.
HAKKO FM-204
Heating Gun / Glue Gun
Thermal Recovery Graph
Excellent thermal recovery:–
The integrated nozzle contains both heater and
sensor to provide more powerful thermal recovery than conventional tips.
New design with reduced distance between the
nozzle end and filter pipe prevents clogging by
sucked solder.
Easy maintenance:–
Uses disposable paper filter pipes. Allows paper and
solder to be disposed of separately.
One-touch nozzle for replacement. Nozzle can be replaced safely with the provided nozzle remover.
Safe design:–
Equipped with a nozzle lock function. Inserting
a nozzle into the grip automatically locks it in
place and prevents the nozzle cartridge from
being pulled out suddenly.
Sleep function
Auto power shutoff function
Detachable handle allows two-way use: gun type
or straight type
Packing List
Smoke Absorber / Static Control
*When the gun grip is detached
Specifications
Desoldering / Rework
Desoldering / Rework
Easier to use!
Soldering
Soldering
Desoldering Tool
* Iron holder (No.FH200-01) is included.
200
150
Melt 20 soldered points (using lead-free solder)
Check and move to the next point one by one
when the temperature reaches to 200°C.
100
50
0
50
100
150
200
250
300
350
Time (sec.)
Simple and Safe Nozzle Replacement
HAKKO FM-2027
* For further details, refer to page 18-21.
Auto power shut-off function
After 30 minutes have elapsed
after inserting the iron into the
iron holder, the auto power
shut-off function activates and
stops to apply power to the
heating element.
Connect the FM-204 station
and FH-200 iron holder using a
connecting cable.
Optional Nozzle
Unit : mm
* It is necessary to change unit settings before using sleep
and auto power shut-off functions.
106
I.D ø1.3
O.D ø2.6
N1-13 Nozzle 1.3mm
I.D ø1
O.D ø2.2
O.D ø2
10.7
button on the back side.
10.7
10.7
10.7
10.7
I.D ø1
N1-L10 Nozzle 1.0mm Long
O.D ø2.3
I.D ø2.3
N1-23 Nozzle 2.3mm
O.D ø3.8
N1-20 Nozzle 2.0mm
O.D ø3.4
I.D ø1.6
O.D ø3
N1-16 Nozzle 1.6mm
3 Press the nozzle lock release
10.7
10.7
into the nozzle cartridge.
46
N1-10 Nozzle 1.0mm
2 Insert the nozzle remover
I.D ø2
1 Detach the nozzle remover.
N1-08 Nozzle 0.8mm
I.D ø0.8
Nozzle
remover
I.D ø0.6
O.D ø1.9
N1-06 Nozzle 0.6mm
Nozzle lock
release button
16.7
4 Pull out the nozzle to replace.
47
Choose the system that best fits your needs!
The portable HAKKO 474 vacuum pump type or the
economical HAKKO 475 air compressor type.
Desoldering / Rework
Desoldering Tools for HAKKO 474 . 475
No. 815
No. 809
Desoldering / Rework
Both models are constructed of static dissipative
materials using an ESD design which prevents
damage to circuit boards and parts caused by
electro-static discharge.
Heating element and motor features zero-cross
switching in order to prevent electrical surges.
An insulated transformer completely isolated the
output circuit from the power input circuit.
Soldering
Soldering
Desoldering Station
No. 816
Specifications
Smoke Absorber / Static Control
HAKKO 475 - external air compressor type
Use filtered air to clean away any dust, oil and
moisture.
With the trigger pulled and air flowing, adjust the
regulator air pressure to 71 psi (5.0kgf/cm ).
2
Model No.
809
815
816
Type
Gun
Pen
Gun
Power Consumption
50W (24V)
Temperature Range
380-480°C
Standard Nozzle
A1003 (ø1.0mm S type)
Dimensions
Weight (w/o cord)
Smoke Absorber / Static Control
No. 474
A1499 (ø1.0mm S type)
135(W) x 174(H)mm
200(W) x 80(H)mm
180(W) x 150(H)mm
200g
100g
120g
Tubing must have a diameter
of more than ø4mm
and a length of less than 3m.
Replacement Nozzles
B
0.8
1.8
A1499
1.0
2.0
A1497
0.8
2.2
Station ············································································1
A1498
0.8
2.3
Desoldering gun (809) ······················································1
A1500
1.0
2.5
A1501
1.3
3.0
A1502
1.6
3.0
A1503
2.0
3.6
No. 475
Other Tools
Power Consumption
474
475
100W
70W
Model Name
Suction Flow
Contents
Filter pipe ·······································································1
Output Voltage
Vacuum Pressure (Max.)
Compressor
Packing List
Station
Vacuum Generator
Air Filter filters
Regulator adjust
out dust, oil
to 71psi. (5.0 kgf/cm2). and moisture.
A1003
1.0
2.0
A1004
0.8
2.3
A1005
1.0
2.5
A1006
1.3
3.0
A1007
1.6
3.0
AC 24V
Cleaning pin for ø1.0mm nozzle ·········································1
Double Cylinder Type
Ejector Type
80kPa (600mmHg)
93kPa (700mmHg)
15 /min.
28 /min.
Nozzle to Ground Resistance
< 2Ω
Nozzle to Ground Potential
< 2mV (Typ. 1.2mV)
HAKKO 474
with 809
Cleaning pin for heating element ········································1
Cleaning drill for ø1.0mm nozzle ·········································1
HAKKO 475
with 809
B
Spring filter ······································································3
Silicone grease ································································1
71dsi (5.0kgf/cm2)(490kPa)
Iron holder (No.631-06) ·····················································1
Compressed Air Consumption
---
1.62 c.f.m. (46 /min.)
Spanner wrench ·······························································1
Station ············································································1
165(W) x 135(H) x 260(D)mm
3.8kg
A
Ceramic paper filter (L) ·····················································4
---
Weight (w/o cord)
B
Ceramic paper filter (S) ·····················································2
Applied Air Pressure
Dimensions
Part No.
A
øA
1.8
øA
0.8
øB
A1002
øB
B
øA
A
Other Tools
A
A1496
Male Connector:
Pipe Thread 1/8
Model No.
For 815, 816
For 809
Part No.
Specifications
Unit : mm
øB
Station
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Connections
Desoldering gun (815/816) ················································1
3.0kg
Filter pipe ·······································································1
Cleaning pin for ø1.0mm nozzle ········································1
HAKKO 474
with 815/816
Cleaning pin for heating element ········································1
Cleaning drill for ø1.0mm nozzle ·········································1
Ceramic paper filter (S) ·····················································2
HAKKO 475
with 815/816
Ceramic paper filter (L) ·····················································4
Spring filter ·····································································3
Silicone grease ·······························································1
Iron holder (No.635-01) ·····················································1
Wrench ··········································································1
Anti-seizure ····································································1
48
49
Desoldering / Rework
Specifications
Smoke Absorber / Static Control
484
60W
Model Name
Station
Vacuum Generator
Vacuum Pressure (Max.)
Suction Flow
Motor Output
Dimensions
Weight (w/o cord)
Specifications
Packing List
Double Cylinder Type
80kPa (600mmHg)
10/12 /min (50/60Hz)
12W
135(W) x 75(H) x180(D)mm
2.5kg
HAKKO 484
Model No.
Contents
Station ·········································································································1
Desoldering gun ··························································································1
Filter set·······································································································1
Cleaning pin for heating core ······································································1
Cleaning pin for ø1.0mm nozzle ·································································1
Cleaning wrench··························································································1
Silicone grease····························································································1
Anti-seizure ·································································································1
Iron holder ···································································································1
Absorption Capacity
18
18G
20
20G
---
w/guard
---
w/guard
12cm3 (12 c.c. )
20cm3 (20 c.c.)
18-N
20-N
Spare Nozzle
18mm
3mm
Smoke Absorber / Static Control
Model No.
Power Consumption
Light weight and economical design.
Powerful enough for both occasional and heavy
duty desoldering applications efficiently.
Unique cleaning shaft allows you to clean the
nozzle quickly and easily.
Desoldering / Rework
Complete with an inner pump, which can be easily carried.
Therefore, suction work is possible anywhere that there is an
electric source available.
The nozzle and heating core have been specially designed so
solder can be absorbed in the filter while it is still in the molten
state.
Consequently maintenance time has been reduced and
work efficiency improved.
To clean, simply pull the knob to remove the filter pipe. The filter
pipe is made of heat-proof transparent glass, therefore the accu-
Soldering
Soldering
Desoldering Tool
20mm
3mm
Desoldering Gun
Heating Gun / Glue Gun
481-T-1.0 (ø1.0mm)
Ceramic Heater
100MΩ
230g
Replacement Nozzles
Part No.
481-T-0.8
481-T-1.0
481-T-1.3
481-T-1.6
A
0.8
1.0
1.3
1.6
B
2.5
2.5
2.5
3.0
Unit : mm
Heating Gun / Glue Gun
Standard Nozzle
Heating Element
Insulation Resistance
Weight (w/o cord & hose)
A
B
Regular Type
Unflux Type
No Clean Type
Specifications
Model No.
Power Consumption
Motor Output
Temperature Range
Standard Nozzle
Nozzle to Ground Resistance
Nozzle to Ground Potential
Vacuum Generator
Vacuum Pressure
Suction Flow
Dimensions
Weight (w/o cord)
Packing List
808
70W
6.5W
380-480°C
A1005 (ø1.0mm)
< 2Ω
< 2mV
Double-Cylinder Type
80kPa (600mmHg)
10 /min
235(W) x 170(H)mm
420g
Replacement Nozzles
Part No.
A1002
A1003
A1004
A1005
A1006
A1007
50
A
0.8
1.0
0.8
1.0
1.3
1.6
B
1.8
2.0
2.3
2.5
3.0
3.0
Model Name
HAKKO 808
Regular Type < Flux >
Removal for thru-hole...
Contents
Desoldering gun ··························································································1
Filter pipe with filter holder and pre-filter (Alum.) ··············································1
Cleaning pin for nozzle ø1.0mm··································································1
Cleaning pin for heating element·································································1
Pre-filter (Alum.) ··························································································3
Ceramic paper filter (L)················································································4
Wrench ········································································································1
Carrying Case
Specifications
Iron Holder
Removal for bridging...
Part No.
Name/Description
FR100-00
HAKKO WICK <REGULAR> 1.5m x 0.6mm
FR100-01
HAKKO WICK <REGULAR> 1.5m x 0.9mm
FR100-02
HAKKO WICK <REGULAR> 1.5m x 1.4mm
FR100-03
HAKKO WICK <REGULAR> 1.5m x 1.9mm
FR100-04
HAKKO WICK <REGULAR> 1.5m x 2.5mm
FR100-05
HAKKO WICK <REGULAR> 1.5m x 3.3mm
87-2-30
HAKKO WICK <REGULAR> 30m x 1.5mm
87-3-30
HAKKO WICK <REGULAR> 30m x 2.0mm
87-4-30
HAKKO WICK <REGULAR> 30m x 2.5mm
87-4-100
HAKKO WICK <REGULAR> 100m x 2.5mm
Other Tools
Other Tools
The unique Hakko design places the pump and motor above,
not inside the grip, so vibration is minimal and the grip is thin
and easy to hold.
The new, miniature, high-performance diaphragm pump is
housed in the pump chamber at the rear of the unit. So,
pump maintenance is quick and easy-simply remove the cover of the pump chamber.
The optional carrying case makes it easy to transport the unit
to wherever it is needed.
Unflux Type < Unflux >
Part No.
Name/Description
FR110-00
HAKKO WICK <UNFLUXED> 1.5m x 0.6mm
FR110-02
HAKKO WICK <UNFLUXED> 1.5m x 1.4mm
FR110-03
HAKKO WICK <UNFLUXED> 1.5m x 1.9mm
FR110-04
HAKKO WICK <UNFLUXED> 1.5m x 2.5mm
FR110-05
HAKKO WICK <UNFLUXED> 1.5m x 3.3mm
Unit : mm
No Clean Type < No Clean Type >
A
B
A
B
No. C1099
No.C1100
Part No.
Name/Description
FR120-00
HAKKO WICK <NO CLEAN> 1.5m x 0.6mm
FR120-01
HAKKO WICK <NO CLEAN> 1.5m x 0.9mm
FR120-02
HAKKO WICK <NO CLEAN> 1.5m x 1.4mm
FR120-03
HAKKO WICK <NO CLEAN> 1.5m x 1.9mm
FR120-04
HAKKO WICK <NO CLEAN> 1.5m x 2.5mm
FR120-05
HAKKO WICK <NO CLEAN> 1.5m x 3.3mm
51
Desoldering / Rework
Specifications
Smoke Absorber / Static Control
484
60W
Model Name
Station
Vacuum Generator
Vacuum Pressure (Max.)
Suction Flow
Motor Output
Dimensions
Weight (w/o cord)
Specifications
Packing List
Double Cylinder Type
80kPa (600mmHg)
10/12 /min (50/60Hz)
12W
135(W) x 75(H) x180(D)mm
2.5kg
HAKKO 484
Model No.
Contents
Station ·········································································································1
Desoldering gun ··························································································1
Filter set·······································································································1
Cleaning pin for heating core ······································································1
Cleaning pin for ø1.0mm nozzle ·································································1
Cleaning wrench··························································································1
Silicone grease····························································································1
Anti-seizure ·································································································1
Iron holder ···································································································1
Absorption Capacity
18
18G
20
20G
---
w/guard
---
w/guard
12cm3 (12 c.c. )
20cm3 (20 c.c.)
18-N
20-N
Spare Nozzle
18mm
3mm
Smoke Absorber / Static Control
Model No.
Power Consumption
Light weight and economical design.
Powerful enough for both occasional and heavy
duty desoldering applications efficiently.
Unique cleaning shaft allows you to clean the
nozzle quickly and easily.
Desoldering / Rework
Complete with an inner pump, which can be easily carried.
Therefore, suction work is possible anywhere that there is an
electric source available.
The nozzle and heating core have been specially designed so
solder can be absorbed in the filter while it is still in the molten
state.
Consequently maintenance time has been reduced and
work efficiency improved.
To clean, simply pull the knob to remove the filter pipe. The filter
pipe is made of heat-proof transparent glass, therefore the accu-
Soldering
Soldering
Desoldering Tool
20mm
3mm
Desoldering Gun
Heating Gun / Glue Gun
481-T-1.0 (ø1.0mm)
Ceramic Heater
100MΩ
230g
Replacement Nozzles
Part No.
481-T-0.8
481-T-1.0
481-T-1.3
481-T-1.6
A
0.8
1.0
1.3
1.6
B
2.5
2.5
2.5
3.0
Unit : mm
Heating Gun / Glue Gun
Standard Nozzle
Heating Element
Insulation Resistance
Weight (w/o cord & hose)
A
B
Regular Type
Unflux Type
No Clean Type
Specifications
Model No.
Power Consumption
Motor Output
Temperature Range
Standard Nozzle
Nozzle to Ground Resistance
Nozzle to Ground Potential
Vacuum Generator
Vacuum Pressure
Suction Flow
Dimensions
Weight (w/o cord)
Packing List
808
70W
6.5W
380-480°C
A1005 (ø1.0mm)
< 2Ω
< 2mV
Double-Cylinder Type
80kPa (600mmHg)
10 /min
235(W) x 170(H)mm
420g
Replacement Nozzles
Part No.
A1002
A1003
A1004
A1005
A1006
A1007
50
A
0.8
1.0
0.8
1.0
1.3
1.6
B
1.8
2.0
2.3
2.5
3.0
3.0
Model Name
HAKKO 808
Regular Type < Flux >
Removal for thru-hole...
Contents
Desoldering gun ··························································································1
Filter pipe with filter holder and pre-filter (Alum.) ··············································1
Cleaning pin for nozzle ø1.0mm··································································1
Cleaning pin for heating element·································································1
Pre-filter (Alum.) ··························································································3
Ceramic paper filter (L)················································································4
Wrench ········································································································1
Carrying Case
Specifications
Iron Holder
Removal for bridging...
Part No.
Name/Description
FR100-00
HAKKO WICK <REGULAR> 1.5m x 0.6mm
FR100-01
HAKKO WICK <REGULAR> 1.5m x 0.9mm
FR100-02
HAKKO WICK <REGULAR> 1.5m x 1.4mm
FR100-03
HAKKO WICK <REGULAR> 1.5m x 1.9mm
FR100-04
HAKKO WICK <REGULAR> 1.5m x 2.5mm
FR100-05
HAKKO WICK <REGULAR> 1.5m x 3.3mm
87-2-30
HAKKO WICK <REGULAR> 30m x 1.5mm
87-3-30
HAKKO WICK <REGULAR> 30m x 2.0mm
87-4-30
HAKKO WICK <REGULAR> 30m x 2.5mm
87-4-100
HAKKO WICK <REGULAR> 100m x 2.5mm
Other Tools
Other Tools
The unique Hakko design places the pump and motor above,
not inside the grip, so vibration is minimal and the grip is thin
and easy to hold.
The new, miniature, high-performance diaphragm pump is
housed in the pump chamber at the rear of the unit. So,
pump maintenance is quick and easy-simply remove the cover of the pump chamber.
The optional carrying case makes it easy to transport the unit
to wherever it is needed.
Unflux Type < Unflux >
Part No.
Name/Description
FR110-00
HAKKO WICK <UNFLUXED> 1.5m x 0.6mm
FR110-02
HAKKO WICK <UNFLUXED> 1.5m x 1.4mm
FR110-03
HAKKO WICK <UNFLUXED> 1.5m x 1.9mm
FR110-04
HAKKO WICK <UNFLUXED> 1.5m x 2.5mm
FR110-05
HAKKO WICK <UNFLUXED> 1.5m x 3.3mm
Unit : mm
No Clean Type < No Clean Type >
A
B
A
B
No. C1099
No.C1100
Part No.
Name/Description
FR120-00
HAKKO WICK <NO CLEAN> 1.5m x 0.6mm
FR120-01
HAKKO WICK <NO CLEAN> 1.5m x 0.9mm
FR120-02
HAKKO WICK <NO CLEAN> 1.5m x 1.4mm
FR120-03
HAKKO WICK <NO CLEAN> 1.5m x 1.9mm
FR120-04
HAKKO WICK <NO CLEAN> 1.5m x 2.5mm
FR120-05
HAKKO WICK <NO CLEAN> 1.5m x 3.3mm
51
SMD Rework Station
LEAD
FREE
Performance comparison table
Offset function
Auto cool-down function
Power-saving design
Card-lock function
Digital Function
Desoldering / Rework
Soldering
Desoldering / Rework
The air outlet is provided with new mechanism to reduce
the temperature irregularity in hot air.
The air outlet is provided with a new mechanism to reduce
the temperature irregularity. Supplies hot air at a stable
temperature.
Comes with an airflow meter to allow
more accurate and easier control of flow
rate.
New mechanism to reduce
FR-803B
The air outlet is provided with new mechanism.
Comes with an airflow meter.
Space-saving design
ESD safe by design
Basic Ability
Analog
FR-802
Soldering
FR-801
For lead-free soldering with sufficiently high power HAKKO hot air lineup allows easier thermal control.
3-step temperature profile can be set.
Comes with a vacuum pipe.
Ideal Function
Digital display
The digital thermal display allows easier temperature control.
Heating Gun / Glue Gun
Specifications
Model No.
FR-801
Model No.
FR-801
Other Tools
For more effective rework operation, it can be interfaced to
the HAKKO FR-830.
The heating conditions can be recreated due to the sensor
feedback temperature control. 50 memories/3 steps temperature profile can be set, allowing easier control for temperature, flow rate and time. Highly accurate job can be standardized.
The power saving function (30 min/60 min/∞ can be selected) will automatically stop the hot airflow after a specific
time passes.
Comes with an offset function.
Step 2
Step 3
5-20 /min. (Max.)
Capacity (Air blow)
100-500°C (Use A1130)
Temperature Range
–
–
Manual /Auto
Timer
–
–
50 memories /3 steps temperature profile
160(W) x 145(H) x 230(D)mm
Dimensions
4kg
Weight (w/o cord)
52
4.3kg
5kg
Handpiece
100V-280W, 110V-330W, 120V-400W, 220V-540W, 230V-600W, 240V-650W
Total Length (w/o hose)
Weight (w/o hose)
185(L)mm
200(L)mm
115g
200g
Optional Nozzles
Packing List
Model Name
Contents
HAKKO FR-801
Station ······························································1
Handpiece ························································1
Power cord ·······················································1
Handpiece holder ·············································1
FP pick-up ························································1
FP pick-up wire (S) ··········································1
FP pick-up wire (L) ···········································1
HAKKO FR-802
Station ······························································1
Handpiece ························································1
Power cord ·······················································1
Handpiece holder ·············································1
Control card ·····················································1
FP pick-up ························································1
FP pick-up wire (S) ··········································1
FP pick-up wire (L) ···········································1
Cool down
HAKKO FR-803B
Time
100-500˚C (Sensor)
Modes
Air
temperature
Start
FR-803B
30W
(Stand-by power consumption 100-120V 4W, 220-240V 4W)
30W
(Stand-by power consumption 100-120V 4W, 220-240V 7W)
Power Consumption
3 steps Temperature Profile
Step 1
FR-802
When the temperature decreases down to
100°C, air supply will be automatically stopped.
3-step 'temperature and time' are pre-programmed.
Sensor feedback temperature control is adopted.
* Nozzle is an optional part.
Other Tools
Preheating, main heating and cooling down 50 memories/3 steps temperature profile can be set.
FR-803B
Station
Power Consumption
Digital display with 50 memories/
3 steps temperature profile
FR-802
100V-310W, 110V-360W, 120V-430W, 220V-570W, 230V-630W, 240V-680W
Power Consumption
Heating Gun / Glue Gun
Comes with the offset function to compensate for difference
of air outlet temperatures depending on the nozzle size.
The power saving function (30 min./60 min./∞ can be selected) will automatically stop the hot airflow after a specific
time passes.
Comes with the auto cool-down function. If the power is
turned off and then continues to supply air until the temperature in the nozzle pipe decreases down to 100°C to protect
the heating element.
Card lock function to lock the setting details.
Smoke Absorber / Static Control
Smoke Absorber / Static Control
temperature irregularity
Station ······························································1
Handpiece ························································1
Power cord ·······················································1
Handpiece holder ·············································1
Control card ·····················································1
Vacuum pipe control knob(L) ···························1
Pad (ø3mm) ·····················································2
Pad (ø5mm) ·····················································2
Pad (ø7.6mm) ··················································2
Please refer to page 54, 55.
SMD-BGA Repair System
Combination of HAKKO
FR-803B and FR-830 allows the SMD and BGA
rework equipment to set
up at a lower price.
* For further details, refer to page 56.
Temperature Probe
Part No.
Name/Description
C1541
Temperature probe for hot air
For measuring the temperature of hot air.
* For further details, refer to page 39.
53
SMD Rework Station
Optional Nozzles
BGA(CSP)
A1140B
0.8
A
Air flow
B
PLCC 11.5 x 11.5 (28 Pins)
* The size in Name/ Specifications
indicates the size of IC package.
A1141B
PLCC 11.5 x 14 (32 Pins)
A:13
B:13
A1139B
A:15
B:13
1.8
6.9
24
19
15
10
33.5
A:11
B:11
A1124B*
Single ø2.5
BGA 13 x 13
BGA 18 x 18
A1477
BGA 38 x 38
A1130*
Single ø4.4
A1475
BGA 27 x 27
A1478
BGA 40 x 40
A1142B*
Bent Single 1.5 x 3
28
A1474
14
19
28
39
BGA 35 x 35
10
A1476
19
13
16
SOP 4.4 x 10
A1472
14
BGA 12 x 12
41
BGA
10
13
A1471
BGA 15 x 15
SOJ 18 x 8
19
A1473
A1184B
16
25.9
A:42.5
B:42.5
A:24.2
B:24.2
SOJ 15 x 8
9
40
BGA 8 x 8
9
4.8
SOP 7.5 x 18
39
41
)
A1134*
D
ø4.4(I.D)
A1260B
SOP 8.6 x 18
A1185B
A1190*
Dual Single 2.5 x 9.5
A1325*
19
ø2.5(I.D)
8.7
11.9
5
18.2
54
A1191*
TSOL 18.5 x 8
10
18.5
SIP 25L
SIP
A1192*
The pitch between
the two nozzles is
adjustable
10
26
* These nozzles are vacuum function inoperative.
The vacuum function is not available in the FR-801 and the FR-802.
ø1.5 (I.D)
10
SIP 50L
2
A1187B
11.7
TSOL 18 x 10
Dual Singleø 1.5 x 5-10
Adjustable Pitch
5
8.2
A1186B
)
(I.
3
Single
TSOL 13 x 10
2
SOP 7.6 x 12.7
45°
7.2
10
A1258B
11.7
SOP
TSOL
7.2
D
ø2.5(I.D)
5.7
1.
5
(I.
SOP 7.5 x 15
16
A1133*
PLCC 9 x 9 (20 Pins)
A:36.5
B:36.5
8
36
SOP 5.6 x 13
15
A1132*
A1131*
13.5
11.7
A1470
21
SOP 13 x 28
A1183*
12
BQFP 24 x 24
29
A1259B
21
SOP 11 x 21
A1188B
10
16
16
16
A:31
B:31
SOJ 10 x 26
SOJ
QFP 42.5 x 42.5
A:19.2
B:19.2
PLCC 34 x 34 (100 Pins)
19
Other Tools
A1257B
A1182B
24
Other Tools
13.6
A:32.2
B:32.2
40
BQFP 19 x 19
A:18.2
B:18.2
A1214B
21
A1181B
13.6
BQFP 17 x 17
A:26
B:26
33.5
A:40.2
B:40.2
39
A1189B
36
31
PLCC 30 x 30 (84 Pins)
PLCC 25 x 25 (68 Pins)
A:21
B:21
29
31
29
29
31
39
Heating Gun / Glue Gun
A:35.2
B:35.2
A1215B
A:18.5
B:18.5
A1137B
19
A:20.2
B:20.2
31
QFP 40 x 40
PLCC 20 x 20 (52 Pins)
Heating Gun / Glue Gun
A1264B
A1138B
QFP 32 x 32
A:27.7
B:39.7
39
QFP 35 x 35
QFP 20 x 20
21
A1265B
A1136B
15
A:19.2
B:19.2
QFP 28 x 40
A:29.7
B:29.7
PLCC
29
19
Smoke Absorber / Static Control
A1263B
PLCC 17.5 x 17.5 (44 Pins)
Smoke Absorber / Static Control
QFP 28 x 28
29
A1180B
A1261B
19
QFP
A1203B
QFP 17.5 x 17.5
A:15.2
B:21.2
A:15.2
B:15.2
15
21
A1127B
15
QFP 14 x 20
A1135B
QFP 14 x 14
A:12.2
B:12.2
12
21
A1129B
A1126B
12
10
A:10.2
B:10.2
10
A1128B
QFP 12 x 12
15
A1262B
Desoldering / Rework
Desoldering / Rework
QFP 10 x 10
A: 9
B:14
10
10
Unit : mm
A1125B
PLCC 12.5 x 7.3 (18 Pins)
6.9
SOJ
15
PLCC
10
Soldering
SOP
Soldering
QFP
52.5
55
SMD Rework Station
Adjustable temperature control: 100-540˚C.
Air volume selector switch with ultra-light setting.
ESD design and grounding measure to minimize
damage from current leakage and electrostatic
discharge.
Safe design to protect the heating elements and P.W.B.
of the unit
Equipped with automatic cool-down function
Space-saving compact design
Desoldering / Rework
Desoldering / Rework
Soldering
Soldering
Preheater / SMD-BGA repair system
Applications
Temperature characteristics graph
Specifications
Temp.(°C)
250
Smoke Absorber / Static Control
200
150
With the FR-830, improvements
in the air outlet structure
enables heat to be applied more
effectively than the previous
model (FR-820), reducing the
time needed to heat the P.W.B.
100
100V-210W, 110V-240W, 120V-470W
Power Consumption
220V-230W, 230V-250W, 240V-270W
Control Temperauture
150-300°C (Above the hot air outlet)
Dimensions
140(W) x 75*(H) x 185(D)mm
Weight (w/o cord)
750g
Air Flow
0.15m3/min (fan capability)
* Height (H) is the distance from the bottom of the foot to the top of the hot air outlet.
Temperature Distribution Chart
°C
Packing List
247sec
Heating Gun / Glue Gun
Model Name
P.W.B
upper side
0
100
200
300
HAKKO FR-830
Contents
400
Preheater ··································································1
Power cord ································································1
400
500
Time (sec.)
Heating Gun / Glue Gun
Test criteria
Measured at the point 2mm
from the nozzle.
Room Temperature 20°C.
Used Nozzle: A1066 ø2.0mm.
500
50
P.W.B.
lower side
Smoke Absorber / Static Control
Test criteria
Setting temperature: 300°C
Distance between air outlet
and P.W.B.: 10mm
Temperature measured using
sensors mounted on both the
top and bottom surfaces of the
P.W.B.
Time until the bottom of the
P.W.B. reaches 200°C
Soldering and desoldering of small surfacemounted chip components.
Shrinking tubing, heating tests and other local
heating operations.
300
200
100
Extension pipe w/Lid
Hand switch
Foot switch
1 2 3 4 5 6 7 8 HEAT
Specifications
27mm
No. B3263
No. B2763
No. B1649
Packing List
Model No.
851
Power Consumption
85W
Model Name
Station
Omnivise
Setting example
HAKKO FR-803B, HAKKO FR-830, Rework Fixture, Omnivise
Hold boards easily, safety and securely. Unique design allows 360°
use. Five(5) adjustable heights.
Can accommodate any board size.
Iron holder ··································································1
Pump
Diaphragm Type
Capacity
6 /min. (Max.)
Dimensions
167(W) x 101(H) x 182(D)mm
Weight (w/o cord)
1.8kg
Iron
Replacement Nozzles
Part No.
Name/Description
A1065
Nozzle ø1.5mm
Power Consumption
80W
A1066
Nozzle ø2.0mm
Temperature Range
100-540°C
A1067
Nozzle ø3.0mm
Standard Nozzle
A1066 (ø2.0mm)
A1147
Nozzle ø1.0mm
Total Length (w/o hose)
217mm
Weight (w/o hose)
180g
No. C1390C
Convenient storage for nozzles.
Removal and installation slots make
changing nozzles safe, fast and easy.
The rework fixture is compact and
stable.
Smooth vertical motion makes operation easy.
No. C1392B
Handpiece ··································································1
Nozzle Tray
Rework Fixture
56
Contents
Station ·······································································1
HAKKO 851
Combination of HAKKO FR-803B and FR-830 allows
the SMD and BGA rework equipment to set up at a lower price.
Other Tools
Other Tools
For local heating
No. C1391B
57
SMD Rework Station
Adjustable temperature control: 100-540˚C.
Air volume selector switch with ultra-light setting.
ESD design and grounding measure to minimize
damage from current leakage and electrostatic
discharge.
Temperature range: 150 to 300°C
Off-set function is provided.
Adopts a new mechanism to reduce temperature irregularity at the air outlet.
Auto cool-down function
Desoldering / Rework
Desoldering / Rework
Soldering
Soldering
Preheater / SMD-BGA repair system
Applications
Temperature characteristics graph
Soldering and desoldering of small surfacemounted chip components.
Shrinking tubing, heating tests and other local
heating operations.
Space-saving design
Temp.(°C)
Air outlet
ø41.6mm
300
12
m
0m
Smoke Absorber / Static Control
Smoke Absorber / Static Control
250
200
150
100
50
Test criteria
Sensor: ø0.2CA (Thermocouple)
Measurement point: Just above sensor,
1mm upon from air outlet
70mm
14
1m
m
Temperature Distribution Chart
0
0.5
1.0
1.5
2.0
Time (sec.)
°C
Packing List
Power Consumption
330W
Model Name
Temperature Range
150-300°C (Above the blow exit)
HAKKO FR-820
Dimensions
140(W) x 70*(H) x 170(D)mm
Weight (w/o cord)
600g
Air Flow
0.18m3/min
Test criteria
Measured at the point 2mm
from the nozzle.
Room Temperature 20°C.
Used Nozzle: A1066 ø2.0mm.
500
Contents
400
Preheater ··································································1
Power cord ································································1
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Specifications
300
200
* Height is measured from the establishment side to the blow exit.
100
Extension pipe w/Lid
Hand switch
Foot switch
1 2 3 4 5 6 7 8 HEAT
Specifications
27mm
No. B3263
No. B2763
No. B1649
Packing List
Model No.
851
Power Consumption
85W
Model Name
Station
Omnivise
Setting example
HAKKO FR-803B, HAKKO FR-820, Rework Fixture, Omnivise
Hold boards easily, safety and securely. Unique design allows 360°
use. Five(5) adjustable heights.
Can accommodate any board size.
Iron holder ··································································1
Pump
Diaphragm Type
Capacity
6 /min. (Max.)
Dimensions
167(W) x 101(H) x 182(D)mm
Weight (w/o cord)
1.8kg
Iron
Replacement Nozzles
Part No.
Name/Description
A1065
Nozzle ø1.5mm
Power Consumption
80W
A1066
Nozzle ø2.0mm
Temperature Range
100-540°C
A1067
Nozzle ø3.0mm
Standard Nozzle
A1066 (ø2.0mm)
A1147
Nozzle ø1.0mm
Total Length (w/o hose)
217mm
Weight (w/o hose)
180g
No. C1390C
Convenient storage for nozzles.
Removal and installation slots make
changing nozzles safe, fast and easy.
The rework fixture is compact and
stable.
Smooth vertical motion makes operation easy.
No. C1392B
Handpiece ··································································1
Nozzle Tray
Rework Fixture
56
Contents
Station ·······································································1
HAKKO 851
Combination of HAKKO FR-803B and FR-820 allows
the SMD and BGA rework equipment to set up at a lower price.
Other Tools
Other Tools
For local heating
No. C1391B
57
Unique parallel movement of tips allows easy removal.
Direct heating prevents damage to neighboring
sensitive components comparing with hot air.
Desoldering / Rework
Available for your HAKKO 936, 937, 701, 702B, 928 stations.
Direct heating; less influence upon surrounding components on crowded boards.
Easy removes SMD chips and flat pack's up to 25mm.
The collet allows easy replacement and alignment of the
tips.
FM-2022:Can be used for chips and flat packages up to
25mm in size.
Desoldering / Rework
Soldering
Soldering
SMD Desoldering
* The HAKKO 950 is not included with the stations.
Operation
Easy Replacement of Tip
Easy Alignment of Tip
Recommended Iron Holder
Smoke Absorber / Static Control
Smoke Absorber / Static Control
No. MODEL FM-2022
FM-2023:Standard or reverse tweezers action can be selected with a switch lever.
Equipped with a small ergonomic grip.
No.C1313
* MODEL FM-2022, FM-2023 must be used with MODEL FM-202 or FM-203.
Please refer to page 14 about FM-203.
Specifications
Replacement Tips
Unit : mm
No. MODEL FM-2023
Specifications
Packing List
FM-2022
Model No.
Power Consumption
140W (24V)
Temperature Range
200-400°C
< 2mV
Tip to Ground Potential
Total Length (w/o cord & tip) 148mm with SOP 25L tip
Weight (w/o cord)
64g with SOP 25L tip
Cord
Model Name
Part No.
Name
A(a)
T
H
50W
A1379
Tip/Chip 1L
1.0
1.0
13.0
Temperature Range
200-400°C
Standard Tip
A1378 (Chip 2L)
A
18.5
A
< 2Ω
Tip to Ground Potential
< 2mV (Typ.0.6mV)
Heating Element
Ceramic Heater
Total Length (w/o cord)
186mm
A1390
Tip/Chip 4L
4.0
1.0
8.0
Weight (w/o cord)
93g
A1391
Tip/Chip 6L
6.0
1.0
8.0
A1380
Tip/Chip 8L
8.0
1.0
8.0
A1381 Tip/Chip 10L 10.0
1.0
8.0
SOP A1382 Tip/Chip 13L 13.0
1.0
8.0
Contents
A1392 Tip/Chip 15L 15.0
1.0
8.0
SMD hot tweezers ···········································1
A1383 Tip/Chip 18L 18.0
1.0
8.0
Heat resistant pad ···········································1
A1384 Tip/Chip 20L 20.0
1.0
8.0
Tip alignment tool ············································1
A1385 Tip/Chip 25L 25.0
1.0
8.0
HAKKO 950
(No.FH200-03) ·················································1
a
45°
A1389 Tip/Chip 0.5I
R0.25
H
A
H
Connecting cable ·············································1
* Tip is an optional part.
37g with I tip
1.2m
Mini parallel remover (MODEL FM-2023) ········1
Tips (T9-I/2pcs of set) ······································1
Please refer to page 17.
13.0
Heat resistant pad ············································1
117mm with I tip
Replacement Tips
CHIP A1388 Tip/Chip 0.5C 1.5(0.5) 1.0
2.0
H
Contents
Iron holder with cleaning sponge
H
A
13.0
Tip/Chip 2L
Tip to Ground Resistance
Model Name
Size A (a) x T (Thickness) x H (Height)
1.0
A1378
Packing List
Parallel remover (MODEL FM-2022) ···············1
HAKKO
MODEL FM-2022
(Conversion kit)
AC 24V
Power Consumption
Other Tools
< 2Ω
Tip to Ground Resistance
Other Tools
FM-2023
Output Voltage
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Discontinued product
HAKKO
MODEL FM-2023
(Conversion kit)
The economical iron for desoldering flat packages.
The answer to every professional engineering need.
The ceramic heating element provides faster heat transmission and excellent insulation.
Iron holder with cleaning sponge
(No.FH200-04) ·················································1
Connecting cable ·············································1
Heat resistant pad ···········································1
Component bed ···············································1
Set Up
Conversion Kit
FM-2022 Conversion Kit (No.FM2022-04)
FM-2023 Conversion Kit (No.FM2023-04)
Specifications
Optional Tips
Please refer to page 25 (for SMD Desoldering).
* The MODEL FM-2022 and FM-2023 are not included with the FM-203 station.
58
Model No.
924
Power Consumption
55W
Heating Element
Ceramic Heater
Insulation Resistance
> 100mΩ
Total Length (w/o cord)
210mm
Weight (w/o cord)
60g
* Tip is an optional part.
59
Unique parallel movement of tips allows easy removal.
Direct heating prevents damage to neighboring
sensitive components comparing with hot air.
Desoldering / Rework
Available for your HAKKO 936, 937, 701, 702B, 928 stations.
Direct heating; less influence upon surrounding components on crowded boards.
Easy removes SMD chips and flat pack's up to 25mm.
The collet allows easy replacement and alignment of the
tips.
FM-2022:Can be used for chips and flat packages up to
25mm in size.
Desoldering / Rework
Soldering
Soldering
SMD Desoldering
* The HAKKO 950 is not included with the stations.
Operation
Easy Replacement of Tip
Easy Alignment of Tip
Recommended Iron Holder
Smoke Absorber / Static Control
Smoke Absorber / Static Control
No. MODEL FM-2022
FM-2023:Standard or reverse tweezers action can be selected with a switch lever.
Equipped with a small ergonomic grip.
No.C1313
* MODEL FM-2022, FM-2023 must be used with MODEL FM-202 or FM-203.
Please refer to page 14 about FM-203.
Specifications
Replacement Tips
Unit : mm
No. MODEL FM-2023
Specifications
Packing List
FM-2022
Model No.
Power Consumption
140W (24V)
Temperature Range
200-400°C
< 2mV
Tip to Ground Potential
Total Length (w/o cord & tip) 148mm with SOP 25L tip
Weight (w/o cord)
64g with SOP 25L tip
Cord
Model Name
Part No.
Name
A(a)
T
H
50W
A1379
Tip/Chip 1L
1.0
1.0
13.0
Temperature Range
200-400°C
Standard Tip
A1378 (Chip 2L)
A
18.5
A
< 2Ω
Tip to Ground Potential
< 2mV (Typ.0.6mV)
Heating Element
Ceramic Heater
Total Length (w/o cord)
186mm
A1390
Tip/Chip 4L
4.0
1.0
8.0
Weight (w/o cord)
93g
A1391
Tip/Chip 6L
6.0
1.0
8.0
A1380
Tip/Chip 8L
8.0
1.0
8.0
A1381 Tip/Chip 10L 10.0
1.0
8.0
SOP A1382 Tip/Chip 13L 13.0
1.0
8.0
Contents
A1392 Tip/Chip 15L 15.0
1.0
8.0
SMD hot tweezers ···········································1
A1383 Tip/Chip 18L 18.0
1.0
8.0
Heat resistant pad ···········································1
A1384 Tip/Chip 20L 20.0
1.0
8.0
Tip alignment tool ············································1
A1385 Tip/Chip 25L 25.0
1.0
8.0
HAKKO 950
(No.FH200-03) ·················································1
a
45°
A1389 Tip/Chip 0.5I
R0.25
H
A
H
Connecting cable ·············································1
* Tip is an optional part.
37g with I tip
1.2m
Mini parallel remover (MODEL FM-2023) ········1
Tips (T9-I/2pcs of set) ······································1
Please refer to page 17.
13.0
Heat resistant pad ············································1
117mm with I tip
Replacement Tips
CHIP A1388 Tip/Chip 0.5C 1.5(0.5) 1.0
2.0
H
Contents
Iron holder with cleaning sponge
H
A
13.0
Tip/Chip 2L
Tip to Ground Resistance
Model Name
Size A (a) x T (Thickness) x H (Height)
1.0
A1378
Packing List
Parallel remover (MODEL FM-2022) ···············1
HAKKO
MODEL FM-2022
(Conversion kit)
AC 24V
Power Consumption
Other Tools
< 2Ω
Tip to Ground Resistance
Other Tools
FM-2023
Output Voltage
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Discontinued product
HAKKO
MODEL FM-2023
(Conversion kit)
The economical iron for desoldering flat packages.
The answer to every professional engineering need.
The ceramic heating element provides faster heat transmission and excellent insulation.
Iron holder with cleaning sponge
(No.FH200-04) ·················································1
Connecting cable ·············································1
Heat resistant pad ···········································1
Component bed ···············································1
Set Up
Conversion Kit
FM-2022 Conversion Kit (No.FM2022-04)
FM-2023 Conversion Kit (No.FM2023-04)
Specifications
Optional Tips
Please refer to page 25 (for SMD Desoldering).
* The MODEL FM-2022 and FM-2023 are not included with the FM-203 station.
58
Model No.
924
Power Consumption
55W
Heating Element
Ceramic Heater
Insulation Resistance
> 100mΩ
Total Length (w/o cord)
210mm
Weight (w/o cord)
60g
* Tip is an optional part.
59
Rework System
Smoke Absorber / Static Control
Packing List
Model Name
Model No.
701
Power Consumption
150W
Soldering iron (907-ESD) ········································1
Desoldering gun (809) ·············································1
Station
Soldering
Desoldering
Output Voltage
AC 24V
Temperature Range
200-480°C
Output Voltage
AC 24V
Vacuum Generator
Double Cylinder Type
Vacuum Pressure
80kPa (600mmHg)
Motor Output
12W
Temperature Range
380-480°C
Suction Flow
15 /min
Other Tools
Filter pipe ································································1
Cleaning pin for ø1.0mm nozzle ·····························1
HAKKO 701
Spring filter ······························································3
Silicone grease ························································1
190(W) x 130(H) x 250(D)mm
Weight (w/o cord)
Wrench ····································································1
Iron holder for soldering iron (No.C1142) ················1
5kg
Iron holder for desoldering gun (No.631-06) ···········1
Soldering Iron
Model No.
907-ESD
Power Consumption
50W (24V)
Standard Tip
900M-T-B (Shape-B)
Tip to Ground Resistance
< 2Ω
Tip to Ground Potential
< 2mV
Heating Element
Ceramic Heater
Total Length (w/o cord)
190mm
Weight (w/o cord)
44g
Replacement Tips
Please refer to page 25 (for M-Type iron).
Replacement Nozzles
809
Power Consumption
50W (24V)
Standard Nozzle
A1003 (ø1.0mm S Type)
Heating Element
Dimensions
Weight (w/o cord)
Ceramic Heater
135(W) x 174(H)mm
200g
Soldering
Desoldering
Unit : mm
Output Voltage
AC 24V
Temperature Range
200-480°C
Handpiece for SMD rework ····································1
Output Voltage
AC 24V
Vacuum Generator
Double Cylinder Type
Iron holder for soldering iron
(No.C1141, No.C1142) ···········································2
Vacuum Pressure
80kPa (600mmHg)
Suction Flow
15 /min
Temperature Range
380-480°C
Input Voltage
AC 100, 110, 220-240V
Pump
Diaphragm Pump
SMD Rework
Capacity
23 /min (Max.)
Temperature Range
100-420°C (Use A1126B)
Dimensions
360(W) x 266(H) x 150(D)mm
Weight (w/o cord)
900S-ESD
907-ESD
Power Consumption
50W (24V)
Tip to Ground Resistance
< 2Ω
Tip to Ground Potential
< 2mV
Heating Element
Ceramic Heater
900S-T-I (Shape-I)
Part No.
A1004
A1005
A1006
A1007
A
B
0.8
1.8
1.0
0.8
1.0
1.3
1.6
2.0
B
2.5
3.0
3.0
A
B
HAKKO 702B
Cleaning pin for ø1.0mm nozzle ····························1
Cleaning pin for heating element ····························1
Cleaning drill for ø1.0mm nozzle ···························1
Ceramic paper filter (S) ··········································2
Silicone grease ······················································1
Wrench ···································································1
FP pick-up ·······························································1
FP pick-up wire (S, L) ·············································2
900M-T-B (Shape-B)
Weight (w/o cord)
176mm
190mm
25g
44g
Desoldering Gun
2.3
Nozzle tray ·····························································1
Filter pipe ·······························································1
Nozzle for SMD rework handpiece
(No.A1124B, A1128B) ············································2
1.2m
Total Length (w/o cord)
A
Iron holder for desoldering gun (No.631-06) ··········1
Handpiece holder ···················································1
Ceramic paper filter (L) ··········································4
Spring filter ·····························································3
10kg
Soldering Iron
Standard Tip
Contents
Station ····································································1
Soldering iron (900S-ESD, 907-ESD) ·····················2
Desoldering gun (809) ············································1
Station
Cord
A1003
Model No.
500W
Model No.
A1002
Desoldering Gun
702B
Power Consumption
Cleaning pin for heating element ····························1
Cleaning drill for ø1.0mm nozzle ····························1
Ceramic paper filter (S) ···········································2
Ceramic paper filter (L) ···········································4
Model Name
Model No.
Other Tools
Dimensions
Contents
Station ·····································································1
Packing List
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Specifications
Smoke Absorber / Static Control
Specifications
Desoldering / Rework
Compact design for minimum use of bench space,
incorporating : two soldering irons.
desoldering gun.
handpiece for hot-air SMD rework.
Replacement tip/nozzle are available from Hakko's
well-known series.
ESD safe by design.
Desoldering / Rework
The all-in-one systems for soldering and desoldering.
ESD safe by design.
Compact design for minimum use of bench
space.
Soldering
Soldering
Repair System
Model No.
809
Power Consumption
50W (24V)
Nozzle to Ground Resistance
< 2Ω
Nozzle to Ground Potential
< 2mV
Standard Nozzle
A1003 (ø1.0mm S Type)
Dimensions
135(W) x 174(H)mm
Weight (w/o cord & hose)
200g
Replacement Tips and Nozzles
Soldering iron: Please refer to page 25.
Desoldering gun: Please refer to page 49.
Handpiece for SMD Rework: Please refer to page 54-55.
Handpiece for SM D Rework
60
Power Consumption
250W
Total Length (w/o cord)
196mm
Weight (w/o hose)
120g
61
Rework System
Smoke Absorber / Static Control
Packing List
Model Name
Model No.
701
Power Consumption
150W
Soldering iron (907-ESD) ········································1
Desoldering gun (809) ·············································1
Station
Soldering
Desoldering
Output Voltage
AC 24V
Temperature Range
200-480°C
Output Voltage
AC 24V
Vacuum Generator
Double Cylinder Type
Vacuum Pressure
80kPa (600mmHg)
Motor Output
12W
Temperature Range
380-480°C
Suction Flow
15 /min
Other Tools
Filter pipe ································································1
Cleaning pin for ø1.0mm nozzle ·····························1
HAKKO 701
Spring filter ······························································3
Silicone grease ························································1
190(W) x 130(H) x 250(D)mm
Weight (w/o cord)
Wrench ····································································1
Iron holder for soldering iron (No.C1142) ················1
5kg
Iron holder for desoldering gun (No.631-06) ···········1
Soldering Iron
Model No.
907-ESD
Power Consumption
50W (24V)
Standard Tip
900M-T-B (Shape-B)
Tip to Ground Resistance
< 2Ω
Tip to Ground Potential
< 2mV
Heating Element
Ceramic Heater
Total Length (w/o cord)
190mm
Weight (w/o cord)
44g
Replacement Tips
Please refer to page 25 (for M-Type iron).
Replacement Nozzles
809
Power Consumption
50W (24V)
Standard Nozzle
A1003 (ø1.0mm S Type)
Heating Element
Dimensions
Weight (w/o cord)
Ceramic Heater
135(W) x 174(H)mm
200g
Soldering
Desoldering
Unit : mm
Output Voltage
AC 24V
Temperature Range
200-480°C
Handpiece for SMD rework ····································1
Output Voltage
AC 24V
Vacuum Generator
Double Cylinder Type
Iron holder for soldering iron
(No.C1141, No.C1142) ···········································2
Vacuum Pressure
80kPa (600mmHg)
Suction Flow
15 /min
Temperature Range
380-480°C
Input Voltage
AC 100, 110, 220-240V
Pump
Diaphragm Pump
SMD Rework
Capacity
23 /min (Max.)
Temperature Range
100-420°C (Use A1126B)
Dimensions
360(W) x 266(H) x 150(D)mm
Weight (w/o cord)
900S-ESD
907-ESD
Power Consumption
50W (24V)
Tip to Ground Resistance
< 2Ω
Tip to Ground Potential
< 2mV
Heating Element
Ceramic Heater
900S-T-I (Shape-I)
Part No.
A1004
A1005
A1006
A1007
A
B
0.8
1.8
1.0
0.8
1.0
1.3
1.6
2.0
B
2.5
3.0
3.0
A
B
HAKKO 702B
Cleaning pin for ø1.0mm nozzle ····························1
Cleaning pin for heating element ····························1
Cleaning drill for ø1.0mm nozzle ···························1
Ceramic paper filter (S) ··········································2
Silicone grease ······················································1
Wrench ···································································1
FP pick-up ·······························································1
FP pick-up wire (S, L) ·············································2
900M-T-B (Shape-B)
Weight (w/o cord)
176mm
190mm
25g
44g
Desoldering Gun
2.3
Nozzle tray ·····························································1
Filter pipe ·······························································1
Nozzle for SMD rework handpiece
(No.A1124B, A1128B) ············································2
1.2m
Total Length (w/o cord)
A
Iron holder for desoldering gun (No.631-06) ··········1
Handpiece holder ···················································1
Ceramic paper filter (L) ··········································4
Spring filter ·····························································3
10kg
Soldering Iron
Standard Tip
Contents
Station ····································································1
Soldering iron (900S-ESD, 907-ESD) ·····················2
Desoldering gun (809) ············································1
Station
Cord
A1003
Model No.
500W
Model No.
A1002
Desoldering Gun
702B
Power Consumption
Cleaning pin for heating element ····························1
Cleaning drill for ø1.0mm nozzle ····························1
Ceramic paper filter (S) ···········································2
Ceramic paper filter (L) ···········································4
Model Name
Model No.
Other Tools
Dimensions
Contents
Station ·····································································1
Packing List
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Specifications
Smoke Absorber / Static Control
Specifications
Desoldering / Rework
Compact design for minimum use of bench space,
incorporating : two soldering irons.
desoldering gun.
handpiece for hot-air SMD rework.
Replacement tip/nozzle are available from Hakko's
well-known series.
ESD safe by design.
Desoldering / Rework
The all-in-one systems for soldering and desoldering.
ESD safe by design.
Compact design for minimum use of bench
space.
Soldering
Soldering
Repair System
Model No.
809
Power Consumption
50W (24V)
Nozzle to Ground Resistance
< 2Ω
Nozzle to Ground Potential
< 2mV
Standard Nozzle
A1003 (ø1.0mm S Type)
Dimensions
135(W) x 174(H)mm
Weight (w/o cord & hose)
200g
Replacement Tips and Nozzles
Soldering iron: Please refer to page 25.
Desoldering gun: Please refer to page 49.
Handpiece for SMD Rework: Please refer to page 54-55.
Handpiece for SM D Rework
60
Power Consumption
250W
Total Length (w/o cord)
196mm
Weight (w/o hose)
120g
61
Smoke Absorber
Smoke absorber available to use in 2ways,
"normal" and "face-down" position
Space-saving compact design
ESD safe by design
Easy filter replacement
Desoldering / Rework
Desoldering / Rework
Compact and noise free, making it perfect for
low-noise environments and desktop use.
Use compressed air - no power supply is necessary.
Soldering
Soldering
Smoke Cleaner
One-touch
operation
Smoke Absorber / Static Control
Compatible Soldering Iron
Set Up
Specifications
Absorption Pipe
HAKKO FX-888
HAKKO FX-950
HAKKO FA-400
Model No.
Metal fitting for absorption pipe
Silicone Hose
50Hz
15W(100V) 18W(110V) 19W(220V) 22W(230V) 24W(240V)
Consumption
60Hz
13W(100V) 15W(110V) 16W(220V) 18W(230V) 19W(240V)
Normal installation
normal
1.0m3/min.(50Hz) 1.1m3/min.(60Hz)
horizontal
0.4m3/min.(50Hz) 0.5m3/min.(60Hz)
Wide-angle smoke absorption.
normal
1.0m/s(50Hz) 1.1m/s(60Hz)
horizontal
2.6m/s(50Hz) 2.9m/s(60Hz)
Airflow*
HAKKO FX-951
Flow rate*
HAKKO FX-838
(Iron: FX-8301)
HAKKO 937*
(Iron: 907/908)
917, 907, 908, 900M, 900L, 902, 933, 934, DASH
Dimensions
166(W) x 212(H) x 113(D)mm
Weight
930g
Accessory
Filter(1pc)
*with filter
Other Tools
HAKKO 933/934
HAKKO FA-400
HAKKO DASH
Powerful absorption at closer area with high flow rate.
Because of low height, it
gives less shade keeping
your working area light.
Contents
Unit ·························································1
Filter ························································1
Other Tools
Model Name
Horizontal installation
Flow rate
Approx.2.5
times faster
Packing List
HAKKO 928*
(Iron: 900M/L)
In addition to horizontal and vertical installations, an
optional arm stand allows use in suspended.
Power
Hose Coupling Band
HAKKO FM-203
User-Selectable Arrangement
Heating Gun / Glue Gun
Heating Gun / Glue Gun
FM-2028, FM-2027
Smoke Absorber / Static Control
Put your fingers here and
pull out the filter.
Replacement Parts
Suspended by Arm Stand
Option
HAKKO 701*
(Iron: 907/908)
HAKKO 702B*
(Iron: 907/908)
Part No.
Name/Description
A1001
Filter set (5 pcs)
Convenient for approach
from above or use in a limited space.
* 900S soldering iron and desoldering gun are not compatible with HAKKO 490.
*Arm stand is an optional part.
*The screw holes on FA-400 are covered by stickers.
Peel off the stickers before mounting
the absorber in the arm stand.
Optional Attachment
Model No.
Packing List
490
Height
200mm
Diameter
120mm
Weight
1.5kg
Noise Level
39db
Working Pressure
4~7kgsf/cm2 (392~686kPa)
Air Consumption
40 /min (5kgsf/cm2)
Suction Flow
2.3 /min (5kgsf/cm2)
Model Name
HAKKO 490
Part No.
Name/Description
Contents
C1568
Arm stand w/knobs(set of 2,ESD)
Unit ··········································································1
B1166
Knob/set of 2,ESD
Footprint
Absorption pipe set (No.C1540) ······························1
400mm
* A second soldering iron can be attached to HAKKO 490 by purchasing an additional
Absorption pipe set.
212
300mm
Specifications
145
166
113
10~50mm
62
Normal placement
(Bottom view)
166
Units : mm
Horizontal placement
(Bottom view)
63
Smoke Absorber
Smoke absorber available to use in 2ways,
"normal" and "face-down" position
Space-saving compact design
ESD safe by design
Easy filter replacement
Desoldering / Rework
Desoldering / Rework
Compact and noise free, making it perfect for
low-noise environments and desktop use.
Use compressed air - no power supply is necessary.
Soldering
Soldering
Smoke Cleaner
One-touch
operation
Smoke Absorber / Static Control
Compatible Soldering Iron
Set Up
Specifications
Absorption Pipe
HAKKO FX-888
HAKKO FX-950
HAKKO FA-400
Model No.
Metal fitting for absorption pipe
Silicone Hose
50Hz
15W(100V) 18W(110V) 19W(220V) 22W(230V) 24W(240V)
Consumption
60Hz
13W(100V) 15W(110V) 16W(220V) 18W(230V) 19W(240V)
Normal installation
normal
1.0m3/min.(50Hz) 1.1m3/min.(60Hz)
horizontal
0.4m3/min.(50Hz) 0.5m3/min.(60Hz)
Wide-angle smoke absorption.
normal
1.0m/s(50Hz) 1.1m/s(60Hz)
horizontal
2.6m/s(50Hz) 2.9m/s(60Hz)
Airflow*
HAKKO FX-951
Flow rate*
HAKKO FX-838
(Iron: FX-8301)
HAKKO 937*
(Iron: 907/908)
917, 907, 908, 900M, 900L, 902, 933, 934, DASH
Dimensions
166(W) x 212(H) x 113(D)mm
Weight
930g
Accessory
Filter(1pc)
*with filter
Other Tools
HAKKO 933/934
HAKKO FA-400
HAKKO DASH
Powerful absorption at closer area with high flow rate.
Because of low height, it
gives less shade keeping
your working area light.
Contents
Unit ·························································1
Filter ························································1
Other Tools
Model Name
Horizontal installation
Flow rate
Approx.2.5
times faster
Packing List
HAKKO 928*
(Iron: 900M/L)
In addition to horizontal and vertical installations, an
optional arm stand allows use in suspended.
Power
Hose Coupling Band
HAKKO FM-203
User-Selectable Arrangement
Heating Gun / Glue Gun
Heating Gun / Glue Gun
FM-2028, FM-2027
Smoke Absorber / Static Control
Put your fingers here and
pull out the filter.
Replacement Parts
Suspended by Arm Stand
Option
HAKKO 701*
(Iron: 907/908)
HAKKO 702B*
(Iron: 907/908)
Part No.
Name/Description
A1001
Filter set (5 pcs)
Convenient for approach
from above or use in a limited space.
* 900S soldering iron and desoldering gun are not compatible with HAKKO 490.
*Arm stand is an optional part.
*The screw holes on FA-400 are covered by stickers.
Peel off the stickers before mounting
the absorber in the arm stand.
Optional Attachment
Model No.
Packing List
490
Height
200mm
Diameter
120mm
Weight
1.5kg
Noise Level
39db
Working Pressure
4~7kgsf/cm2 (392~686kPa)
Air Consumption
40 /min (5kgsf/cm2)
Suction Flow
2.3 /min (5kgsf/cm2)
Model Name
HAKKO 490
Part No.
Name/Description
Contents
C1568
Arm stand w/knobs(set of 2,ESD)
Unit ··········································································1
B1166
Knob/set of 2,ESD
Footprint
Absorption pipe set (No.C1540) ······························1
400mm
* A second soldering iron can be attached to HAKKO 490 by purchasing an additional
Absorption pipe set.
212
300mm
Specifications
145
166
113
10~50mm
62
Normal placement
(Bottom view)
166
Units : mm
Horizontal placement
(Bottom view)
63
Static Eliminator
Packing List
Parallel piping joint (No.B1246) permits a variety of piping
layouts to be used.
Model Name
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Examples of Installation
Safety functions
– Fan motor rotation monitoring function (force
detection)
– High voltage output shutdown function (overload detection)
– As soon as the fan guard is detached, the power supply is automatically shut off.
The voltage will be neutralized within 5V in approximately 10 seconds.
Multiple power supplies allow use in many places. (100V~240V)
Desoldering / Rework
Desoldering / Rework
Compact, light weight design.
Convenient operation-easy to install flexible ducts
permit quick and simple system adoption to longer
or relocated production lines.
Highly efficient operation-fumes and flux are absorbed at their source and trapped by a double filter
system.
One HAKKO 494 system handles Max. 10 soldering
irons.
Soldering
Soldering
Smoke Absorber
Contents
Unit ·······························································1
* One End Cover is required for every row of workstations.
(One End Cover comes with each set).
Absorption pipe set ·······································1
Duct 3m ························································1
Filter case ····················································1
1.5m
Filter cap ······················································1
3m
Exhaust
side
HAKKO 494
1.5m
End cover ·····················································1
Nylon strap ···················································2
Main filter ·····················································5
End Cover
Exhaust duct 5m ··········································1
Specifications
Pre-filter ························································5
Suppressor ···················································1
Model No.
494
50Hz
Frequency
150W
200W
2.3kPa (240mm/Aq )
3.2kPa (325mm/Aq)
1.56m3/min.
1.82m3/min.
Power Consumption
Static Pressure
Absorption Capacity
When ordering HAKKO 494, please specify the model number of soldering station/iron
and q'ty to be used for additional parts arrangement.
Model No.
FE-500
Input Voltage
DC24V ± 5% 360mA
Output Voltage
AC3.5kV
Factory adjusted to within ± 5V
Ion Balance
(at 300 mm from the front panel)
Airflow
1.5 to 3.0m3/min (variable)
Noise
52dB (A) With maximum wind volume
0.03 ppm or less (at a point 300 mm from the
Ozone Production
Maximum Allowable
40°C
Ambient Temperature
Pre-filter level
Length of Duct (Outlet)
< 5m
Dimensions
140(W) x 190(H) x 81(D)mm
Dimensions (w/o duct)
322(W) x 300(H) x 386(D)mm
Weight (w/o AC Adapter)
1.4kg
Weight (w/o cord & duct)
18kg
AC Adapter Input
AC100-240V 50/60Hz 0.4A
Weight of AC Adapter (w/o cord)
135g
Optional Attachments
C1029
C1030
C1031
C1033
C1034
C1035
C1086
Name/Description
Optional Attachment
Part No.
Name/Description
C1023
Arm stand/1.8kg
Duct Set
Packing List
Part No.
Easy to replace electrodes
Other Tools
Filter
* Above Measurement Value: Unit only
Easy to clean
outlet and aligned with the center of the outlet)
< 20m
Length of Duct (Inlet)
Other Tools
Inlet socket for smoke absorber ··················1
60Hz
Easy Maintenance
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Suppressor
End Cover
Suction
side
Specifications
Accessories
Part No. Part Name
Absorption Pipe Set A
Filter cap ······················································1
for HAKKO DASH, 900M, 900L
Pre-filter ························································5
Absorption Pipe Set B
C1028
for HAKKO MACH-I (920-922)
Duct Set
Filter case ·····················································1
Model Name
Contents
Unit ·······································································1
HAKKO FE-500
HAKKO FG-450 checks the ion
balance status.
Cover securing bracket ········································1
AC adapter ···························································1
Duct 1.5m ······················································1
Absorption Pipe Set C
Check the ion balance
Contents
Nylon strap ···················································2
for HAKKO MACH-I (918)
Absorption pipe ··························1
Absorption Pipe Set E
Silicone hose 1m ·······················1
for HAKKO MG (except 150W)
Hose coupling band ··················5
Part No.
Name/Description
Absorption Pipe Set F
Metal fitting for absorption pipe ···1
A1525
Filter
B3120
Discharge electrode
for HAKKO 455
Replacement Parts
Absorption Pipe Set G
for HAKKO 456
Absorption Pipe Set H
for HAKKO 902, 904
Absorption pipe ··························1
C1540
Absorption Pipe Set R*
Silicone hose 1.5m ·····················1
Hose coupling band ··················5
Metal fitting for absorption pipe ···1
64
* No.C1540 can be attached to: FM-2027, FM-2028, 917, 907, 908, 900M, 900L, 902,
933, 934, DASH.
65
Static Eliminator
Packing List
Parallel piping joint (No.B1246) permits a variety of piping
layouts to be used.
Model Name
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Examples of Installation
Safety functions
– Fan motor rotation monitoring function (force
detection)
– High voltage output shutdown function (overload detection)
– As soon as the fan guard is detached, the power supply is automatically shut off.
The voltage will be neutralized within 5V in approximately 10 seconds.
Multiple power supplies allow use in many places. (100V~240V)
Desoldering / Rework
Desoldering / Rework
Compact, light weight design.
Convenient operation-easy to install flexible ducts
permit quick and simple system adoption to longer
or relocated production lines.
Highly efficient operation-fumes and flux are absorbed at their source and trapped by a double filter
system.
One HAKKO 494 system handles Max. 10 soldering
irons.
Soldering
Soldering
Smoke Absorber
Contents
Unit ·······························································1
* One End Cover is required for every row of workstations.
(One End Cover comes with each set).
Absorption pipe set ·······································1
Duct 3m ························································1
Filter case ····················································1
1.5m
Filter cap ······················································1
3m
Exhaust
side
HAKKO 494
1.5m
End cover ·····················································1
Nylon strap ···················································2
Main filter ·····················································5
End Cover
Exhaust duct 5m ··········································1
Specifications
Pre-filter ························································5
Suppressor ···················································1
Model No.
494
50Hz
Frequency
150W
200W
2.3kPa (240mm/Aq )
3.2kPa (325mm/Aq)
1.56m3/min.
1.82m3/min.
Power Consumption
Static Pressure
Absorption Capacity
When ordering HAKKO 494, please specify the model number of soldering station/iron
and q'ty to be used for additional parts arrangement.
Model No.
FE-500
Input Voltage
DC24V ± 5% 360mA
Output Voltage
AC3.5kV
Factory adjusted to within ± 5V
Ion Balance
(at 300 mm from the front panel)
Airflow
1.5 to 3.0m3/min (variable)
Noise
52dB (A) With maximum wind volume
0.03 ppm or less (at a point 300 mm from the
Ozone Production
Maximum Allowable
40°C
Ambient Temperature
Pre-filter level
Length of Duct (Outlet)
< 5m
Dimensions
140(W) x 190(H) x 81(D)mm
Dimensions (w/o duct)
322(W) x 300(H) x 386(D)mm
Weight (w/o AC Adapter)
1.4kg
Weight (w/o cord & duct)
18kg
AC Adapter Input
AC100-240V 50/60Hz 0.4A
Weight of AC Adapter (w/o cord)
135g
Optional Attachments
C1029
C1030
C1031
C1033
C1034
C1035
C1086
Name/Description
Optional Attachment
Part No.
Name/Description
C1023
Arm stand/1.8kg
Duct Set
Packing List
Part No.
Easy to replace electrodes
Other Tools
Filter
* Above Measurement Value: Unit only
Easy to clean
outlet and aligned with the center of the outlet)
< 20m
Length of Duct (Inlet)
Other Tools
Inlet socket for smoke absorber ··················1
60Hz
Easy Maintenance
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Suppressor
End Cover
Suction
side
Specifications
Accessories
Part No. Part Name
Absorption Pipe Set A
Filter cap ······················································1
for HAKKO DASH, 900M, 900L
Pre-filter ························································5
Absorption Pipe Set B
C1028
for HAKKO MACH-I (920-922)
Duct Set
Filter case ·····················································1
Model Name
Contents
Unit ·······································································1
HAKKO FE-500
HAKKO FG-450 checks the ion
balance status.
Cover securing bracket ········································1
AC adapter ···························································1
Duct 1.5m ······················································1
Absorption Pipe Set C
Check the ion balance
Contents
Nylon strap ···················································2
for HAKKO MACH-I (918)
Absorption pipe ··························1
Absorption Pipe Set E
Silicone hose 1m ·······················1
for HAKKO MG (except 150W)
Hose coupling band ··················5
Part No.
Name/Description
Absorption Pipe Set F
Metal fitting for absorption pipe ···1
A1525
Filter
B3120
Discharge electrode
for HAKKO 455
Replacement Parts
Absorption Pipe Set G
for HAKKO 456
Absorption Pipe Set H
for HAKKO 902, 904
Absorption pipe ··························1
C1540
Absorption Pipe Set R*
Silicone hose 1.5m ·····················1
Hose coupling band ··················5
Metal fitting for absorption pipe ···1
64
* No.C1540 can be attached to: FM-2027, FM-2028, 917, 907, 908, 900M, 900L, 902,
933, 934, DASH.
65
Wrist Strap
Comfortable and light weight.
Standard ground termination is alligator clip &
w/banana plug.
With adjustable wrist band.
Available in blue color.
Packing List
442B-01
Color
442B-02
Model Name
Wrist band ······························································1
Blue
1.5m
Grounding Wire
Contents
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Specifications
Part No.
Desoldering / Rework
Desoldering / Rework
Two modes for measuring electric potential:
– Electrostatic potential of object or human body
– Ion balance of ionizer
Adjusts zero point easily with just a single touch
of a button.
Battery indicator informs you the replacement
timing of battery.
Easy-to-see with large figures and color display.
Soldering
Soldering
Static Level Meter
2.5m
HAKKO 442B
Grounding wire ······················································1
Cord helper ····························································1
Signal detection method
Oscillating chopper method
Display refresh frequency
0.5 seconds
Measurable potential range
Normal mode: 0.00 to ±19.99kV (resolution: 0.01kV)
Sensing area rotates and you can locate it at any position which allows easy readout under any situations as
shown in the illustration.
I.B (Ion balance) mode: 0.000 to ±1.999kV (resolution: 0.001kV)
Measurement precision
±10% of reading ±2 digit
Continuous operating limit
Approximately 10 hours (with alkaline battery)
Measuring distance
30 mm (between object being measured and sensor)
Measuring distance adjustment
Red LED beam focusing method
Sensor head rotation angle
180º (stops every 45º)
Display
LCD display with built-in backlight
Polarity display
+ polarity / - polarity display
Mode switching
Switch modes by pressing MODE button
Battery check
Remaining charge displayed in display panel
Battery
DC9V alkaline rectangular dry cell battery 006P
Operating temperature/ humidity range
0 - +40ºC, 20 - 70%RH, non-condensing
Dimensions
68 mm x 22 mm x 138 mm (W x D x H)
Weight
Approximately 160g (including battery)
How To Use The Cord Helper
Part No.
Name/Description
B2760
Strap
B2758
Grounding wire/1.5m
B2759
Grounding wire/2.5m
90-degree turn
half-turn
90-degree turn
hold at every
45-degree
Comfortable and light weight.
Available in blue, wine and green color.
'Velcro' & 'Snap' help quick and easy adjusting.
Standard ground termination is alligator clip.
90-degree rotated
sensor head
Other Tools
Other Tools
Replacement Parts
Rotary Sensor Head
Heating Gun / Glue Gun
Heating Gun / Glue Gun
Specifications
normally-positioned
sensor head
object to be measured
Packing List
Model No.
Contents
90-degree rotated
sensor head
Unit (With case) ························································1
Grounding wire ·························································1
HAKKO FG-450
Strap ·········································································1
Battery (DC9V aikaline rectangular dry cell battery 006P)‹For trial› ···1
Ion Balance Plate (With screw)·································1
Replacement Parts
Alligator Clip
Velcro
Measuring Method
Specifications
Because the ion balance plate is supplied with the unit
as the standard accessory, you can check ion balance
quickly in addition to measuring electrostatic potential.
Part No.
496B
496R
496G
Color
Blue
Wine
Green
Grounding Wire
Part No.
Name/Description
B3584
Grounding wire
B3585
Ion balance plate
ion balance
plate
Optional Parts
Part No.
B3586
66
Name/Description
Charging level measurement plate for body
Ion balance can be
measured in 1-V intervals.
Spare Snap (Female)
Snap with Resistor (1MΩ)
Curled Cord (2m)
Wrist Band (Cloth band)
Replacement Parts
Option
Ion Balance Measurement
2m
Electric
Potential
Measurement
Part Name
Name/Description
Measuring Plate for
electrostatic potential of the human
body (option)
496-1B
Wrist band <Blue>
496-1R
Wrist band <Wine>
496-1G
Wrist band <Green>
You can measure the
electrostatic potential of
the human body easily
with the exclusive Measuring Plate.
496-2B
Grounding wire <Blue>
496-2R
Grounding wire <Wine>
496-2G
Grounding wire <Green>
67
Wrist Strap
Desoldering / Rework
Comfortable and light weight.
Standard ground termination is alligator clip &
w/banana plug.
With adjustable wrist band.
Available in blue color.
Packing List
442B-01
Color
442B-02
Model Name
Wrist band ······························································1
Blue
1.5m
Grounding Wire
Contents
Smoke Absorber / Static Control
Smoke Absorber / Static Control
Specifications
Part No.
Desoldering / Rework
Three modes for measuring electric potential:
(1) Momentary value of static electric potential.
(2) Peak value of static electric potential.
(3) AC potential.
Measurement of ion balance in 1-V intervals.
High sensitivity and high precision.
Simple adjustment of measurement distance.
Pocket size: compact and light weight.
Soldering
Soldering
Static Level Meter
2.5m
HAKKO 442B
Grounding wire ······················································1
Cord helper ····························································1
Specifications
Model No.
Packing List
Heating Gun / Glue Gun
Distance
Other Tools
Measurement
Precision
Display
Alkaline battery "AA" ·················································1
HAKKO 430
Plate for measuring (lon balance) ·····························1
object being measured)
Grounding wire with screw and nut ··························1
1V for 10kV display,output
Monitor cord ·····························································1
B2760
Strap
B2758
Grounding wire/1.5m
B2759
Grounding wire/2.5m
impedance 100Ω
Measurement
Distance
Adjustment
Red LED beam
(find distance where light
spot is in focus)
Range
0 to ± 1,999V
Resolution
1V
Distance
Any (when plate is attached)
Output
Unit ···········································································1
10V
50mm (between detector and
Contents
Name/Description
Comfortable and light weight.
Available in blue, wine and green color.
'Velcro' & 'Snap' help quick and easy adjusting.
Standard ground termination is alligator clip.
1V for 1kV display,
output impedance 100Ω
Other Tools
Ion Balance
Measurement
Output
0 to ± 19.99kV
How To Use The Cord Helper
Part No.
Heating Gun / Glue Gun
Resolution
Electric Potential
Measurement
Model Name
430
Range
Replacement Parts
±5% of reading ±2 digits
(in range from - 10kV to +10kV)
Over Range
#
Battery Alarm
AC (DC) blinks
Polarity
Indicates negative (-) polarity only
Power Supply
One 1.5V Alkaline Battery "AA"
(provide approximately 10 hours of continuous use)
Operating
Environment
0 to 40°C, 20 to 90% RH, no dew formation
Dimensions
106(W) x 23(H) x 66(D)mm
Weight (w/battery)
120g
Alligator Clip
Velcro
Specifications
Part No.
496B
496R
496G
Color
Blue
Wine
Green
Grounding Wire
2m
Spare Snap (Female)
Snap with Resistor (1MΩ)
Curled Cord (2m)
Wrist Band (Cloth band)
Replacement Parts
66
Part Name
Name/Description
496-1B
Wrist band <Blue>
496-1R
Wrist band <Wine>
496-1G
Wrist band <Green>
496-2B
Grounding wire <Blue>
496-2R
Grounding wire <Wine>
496-2G
Grounding wire <Green>
67
Heating Gun
Desoldering / Rework
Ideal for use in a variety of heating operations including drying paint, processing shrink films and shrink tubing, drying
resin putty for sheet metal, repairing automobile urethane
bumpers and applying long-length floor materials or vinyl
moldings.
Powerful heating for a wide range of work.
Light weight, ergonomic design for easier handling and simpler operation.
Desoldering / Rework
Can be used anywhere quickly and easily to
check a variety of grounding systems.
Ensures employee's safety.
Eliminates product defects caused by static electricity.
Soldering
Soldering
System Tester
Smoke Absorber / Static Control
Smoke Absorber / Static Control
No. 880B/881
Quickly and simply checks
Wrist straps and grounding wires.
The contact resistance between the wrist strap and the skin.
No. 882
Heating Gun / Glue Gun
Specifications
Compatibility Chart
Model No.
880B
Power Consumption
800W
1000W
Maximum Temperature*
400°C
450°C
Model No.
Packing List
498
Model No.
Power Supply
9V Battery
Grounding Wire
2.5m
Operating Environment
0 to 40°C, 20 to 90%RH, no dew formation
LED Indication
Calibration Resistance
Buzzer
R<800KΩ
OFF
LOW (Red)
GOOD (Green)
HIGH (Red)
HAKKO 498
800KΩ<
=R<
=9MΩ
ON
R>9MΩ
OFF
Contents
Unit ·························································1
881
---
Model No.
Part No.
Room Temp.
~450°C
---
Air Velocity
330m/min.
360m/min.
Air Flow
0.18m3/min.
0.2m3/min.
Dimensions
245(W) x 185(H) x 70(D)mm
285(W) x 185(H)
x 70(D)mm
550g
700g
Weight (w/o cord)
* Max. Temp. is approximate one which measured at the point 10mm from the pipe.
880B
882
881
A1108
A1109
A1110
A1111
*A1112
*A1113
*A1114
B1419
B1420
Grounding wire ·······································1
··· Usable
* Indicate optional attachments that require the A1111 for use.
Optional Parts & Operating Technique
(The temperature of No. 882 is at Temp. Control knob 6.)
No.A1109
Nozzle/Hook Type
No.A1110
Nozzle/Spatula Type 62mm
No.A1111
Nozzle Holder
No.A1112
Nozzle
Ideal for the circumference heating of
shrink tubing, plastic shafting etc.
Ideal for heating of large items like
shrink film.
Attach this nozzle according to drowing,
and use for partial heating.
Insert this nozzle into No. A1111.
Ideal for repairing carpet etc. where an
adhesive agent is used.
Temperature
Air Velocity
880B
881.882
350°C
400°C
270m/min. 300m/min.
Temperature
Air Velocity
880B
881.882
450°C
500°C
580m/min. 630m/min.
No.A1113
Nozzle/Single ø5
No.A1114
Nozzle/Spatula Type 20mm
No.B1419 Stand
No.B1420 Stand
Insert this nozzle into No. A1111.
Ideal for partial heating.
Attach this nozzle on No. A1111
Ideal for adhension of vinyl chloride
sheet etc.
For vertical operation.
Remove original
and attach.
880B
Temperature
550°C
Air Velocity
780m/min.
Temperature
Air Velocity
68
882
The optional attachments that can be used depend on the model.
Use the chart below to check for compatibility.
Other Tools
Other Tools
Temp. Control Function
Specifications
Heating Gun / Glue Gun
Operation
Simply connect the grounding wire and press the pad.
If the grounding system is safe, the green 'GOOD' lamp will light up
and an audible signal will be heard.
880B
881.882
450°C
500°C
881.882
Temperature
550°C
Air Velocity
780m/min.
720m/min. 780m/min.
69
Heating Gun
Desoldering / Rework
Ideal for use in a variety of heating operations including drying paint, processing shrink films and shrink tubing, drying
resin putty for sheet metal, repairing automobile urethane
bumpers and applying long-length floor materials or vinyl
moldings.
Powerful heating for a wide range of work.
Light weight, ergonomic design for easier handling and simpler operation.
Desoldering / Rework
Can be used anywhere quickly and easily to
check a variety of grounding systems.
Ensures employee's safety.
Eliminates product defects caused by static electricity.
Soldering
Soldering
System Tester
Smoke Absorber / Static Control
Smoke Absorber / Static Control
No. 880B/881
Quickly and simply checks
Wrist straps and grounding wires.
The contact resistance between the wrist strap and the skin.
No. 882
Heating Gun / Glue Gun
Specifications
Compatibility Chart
Model No.
880B
Power Consumption
800W
1000W
Maximum Temperature*
400°C
450°C
Model No.
Packing List
498
Model No.
Power Supply
9V Battery
Grounding Wire
2.5m
Operating Environment
0 to 40°C, 20 to 90%RH, no dew formation
LED Indication
Calibration Resistance
Buzzer
R<800KΩ
OFF
LOW (Red)
GOOD (Green)
HIGH (Red)
HAKKO 498
800KΩ<
=R<
=9MΩ
ON
R>9MΩ
OFF
Contents
Unit ·························································1
881
---
Model No.
Part No.
Room Temp.
~450°C
---
Air Velocity
330m/min.
360m/min.
Air Flow
0.18m3/min.
0.2m3/min.
Dimensions
245(W) x 185(H) x 70(D)mm
285(W) x 185(H)
x 70(D)mm
550g
700g
Weight (w/o cord)
* Max. Temp. is approximate one which measured at the point 10mm from the pipe.
880B
882
881
A1108
A1109
A1110
A1111
*A1112
*A1113
*A1114
B1419
B1420
Grounding wire ·······································1
··· Usable
* Indicate optional attachments that require the A1111 for use.
Optional Parts & Operating Technique
(The temperature of No. 882 is at Temp. Control knob 6.)
No.A1109
Nozzle/Hook Type
No.A1110
Nozzle/Spatula Type 62mm
No.A1111
Nozzle Holder
No.A1112
Nozzle
Ideal for the circumference heating of
shrink tubing, plastic shafting etc.
Ideal for heating of large items like
shrink film.
Attach this nozzle according to drowing,
and use for partial heating.
Insert this nozzle into No. A1111.
Ideal for repairing carpet etc. where an
adhesive agent is used.
Temperature
Air Velocity
880B
881.882
350°C
400°C
270m/min. 300m/min.
Temperature
Air Velocity
880B
881.882
450°C
500°C
580m/min. 630m/min.
No.A1113
Nozzle/Single ø5
No.A1114
Nozzle/Spatula Type 20mm
No.B1419 Stand
No.B1420 Stand
Insert this nozzle into No. A1111.
Ideal for partial heating.
Attach this nozzle on No. A1111
Ideal for adhension of vinyl chloride
sheet etc.
For vertical operation.
Remove original
and attach.
880B
Temperature
550°C
Air Velocity
780m/min.
Temperature
Air Velocity
68
882
The optional attachments that can be used depend on the model.
Use the chart below to check for compatibility.
Other Tools
Other Tools
Temp. Control Function
Specifications
Heating Gun / Glue Gun
Operation
Simply connect the grounding wire and press the pad.
If the grounding system is safe, the green 'GOOD' lamp will light up
and an audible signal will be heard.
880B
881.882
450°C
500°C
881.882
Temperature
550°C
Air Velocity
780m/min.
720m/min. 780m/min.
69
Cutting Tool
Desoldering / Rework
Smoke Absorber / Static Control
No. 106-08
No. 106-01
Heating Gun / Glue Gun
Other Tools
Model No.
804
Model No.
Name
Power Consumption
100W
106-01
Flush Cut with Safety Clip
1.3mm
Standard Nozzle
A1083 (ø2.0mm)
106-02
Flush Cut with Angled Blade
1.3mm
Melting Temperature
100-200°C variable
106-03
Flush Cut with Small Blade
0.8mm
Discharge Capacity
900g/hour
106-04
For a Front, Flush Cut
1.0mm
Dimensions
215(W) x 170(H) x 45(D)mm
106-05
Flush Cut
1.3mm
Weight (w/o cord)
350g
106-06
Short Nose Pliers
–
106-07
Long Nose Pliers
–
106-08
Bent Nose Pliers
–
Packing List
Adhesive Used
Part No.
Name
810
Polyamide
EVA
Yellowish-Brown
Open Time*
Temperature at which
adhesive is heat-resistant
14 pcs
2,300 cps. (2,300mPa·s)
5,800 cps. (5,800mPa·s)
10 seconds
40 seconds
100°C
55°C
P.W.B.
Suitability
B
C
D
E
106-01
132
54
13.5
5
20
106-02
129
54
13.5
5
16
106-03
130
54
9.5
4
18
106-04
138
54
14
6
27
106-05
132
54
13.5
5
20
106-06
140
54
13
6
29
106-07
154
54
13
6
40
106-08
146
54
13
4
35
Model No.
Unit ·························································1
Stand assembly ······································1
Spanner(13, 14) ·····································2
Replacement Nozzles
Part No.
A
Contents
Name/Description
A1088
Nozzle ø1.0mm
A1086
Nozzle ø1.5mm
A1083
Nozzle ø2.0mm
A1089
Long nozzle ø1.0mm
A1087
Long nozzle ø1.5mm
A1084
Long nozzle ø2.0mm
Unit : mm
Diagram
E
B
C
A
D
19
Milky-White
ø11.5 x 220mm
Size
Viscosity
812
1kg
Packing
Color
811
Maximum cutting capability for copper wire
Unit : mm
Model No.
HAKKO 804
This model has been designed for stick adhesives (those
hardended into the shape of a stick) only. Be sure to use
adhesives recommended by Hakko. (No. 810: UL94V-O
Recognized)
Specifications
Other Tools
When using EVA adhesives
· Glue paper products. (cardboard boxes, gift boxes, etc.)
· Fasten wood products.
· Fasten plastics & metals.
· Fasten textiles and shock absorbent packing.
· Reseal products during packaging.
No. 106-03
Heating Gun / Glue Gun
When using polyamide adhesives
· Reinforce and insulate soldered parts.
· Fasten capacitors, resistors, etc.
· Fasten jumper wires.
· Perform insulation potting for terminals.
· Fasten the ends of coils.
· Fasten deflecting yokes and variable coils.
No. 106-06
Smoke Absorber / Static Control
Specifications
No. 106-07
No. 106-04
No. 106-02
Major Applications
Designed for precision assembly of delicate,
complex electronic work.
Soft-touch grip ensures long and comfortable
work.
Recommend to cut copper & soft lead wires.
No. 106-05
Desoldering / Rework
Temperature control function enables use of
polyamide adhesives that are ideal for use with
electronic components.
Superior thermal recovery makes the unit tough
enough to handle several operations in succession.
Soldering
Soldering
Glue Gun
Wood
32
32
Paper
Metal
Plastic
Packing
in aluminum foil bag
Adhesives marked with
are more suited for that material than .
in polyethylene bag
in blister pack
* Application Period.
70
71
Cutting Tool
Desoldering / Rework
Smoke Absorber / Static Control
No. 106-08
No. 106-01
Heating Gun / Glue Gun
Other Tools
Model No.
804
Model No.
Name
Power Consumption
100W
106-01
Flush Cut with Safety Clip
1.3mm
Standard Nozzle
A1083 (ø2.0mm)
106-02
Flush Cut with Angled Blade
1.3mm
Melting Temperature
100-200°C variable
106-03
Flush Cut with Small Blade
0.8mm
Discharge Capacity
900g/hour
106-04
For a Front, Flush Cut
1.0mm
Dimensions
215(W) x 170(H) x 45(D)mm
106-05
Flush Cut
1.3mm
Weight (w/o cord)
350g
106-06
Short Nose Pliers
–
106-07
Long Nose Pliers
–
106-08
Bent Nose Pliers
–
Packing List
Adhesive Used
Part No.
Name
810
Polyamide
EVA
Yellowish-Brown
Open Time*
Temperature at which
adhesive is heat-resistant
14 pcs
2,300 cps. (2,300mPa·s)
5,800 cps. (5,800mPa·s)
10 seconds
40 seconds
100°C
55°C
P.W.B.
Suitability
B
C
D
E
106-01
132
54
13.5
5
20
106-02
129
54
13.5
5
16
106-03
130
54
9.5
4
18
106-04
138
54
14
6
27
106-05
132
54
13.5
5
20
106-06
140
54
13
6
29
106-07
154
54
13
6
40
106-08
146
54
13
4
35
Model No.
Unit ·························································1
Stand assembly ······································1
Spanner(13, 14) ·····································2
Replacement Nozzles
Part No.
A
Contents
Name/Description
A1088
Nozzle ø1.0mm
A1086
Nozzle ø1.5mm
A1083
Nozzle ø2.0mm
A1089
Long nozzle ø1.0mm
A1087
Long nozzle ø1.5mm
A1084
Long nozzle ø2.0mm
Unit : mm
Diagram
E
B
C
A
D
19
Milky-White
ø11.5 x 220mm
Size
Viscosity
812
1kg
Packing
Color
811
Maximum cutting capability for copper wire
Unit : mm
Model No.
HAKKO 804
This model has been designed for stick adhesives (those
hardended into the shape of a stick) only. Be sure to use
adhesives recommended by Hakko. (No. 810: UL94V-O
Recognized)
Specifications
Other Tools
When using EVA adhesives
· Glue paper products. (cardboard boxes, gift boxes, etc.)
· Fasten wood products.
· Fasten plastics & metals.
· Fasten textiles and shock absorbent packing.
· Reseal products during packaging.
No. 106-03
Heating Gun / Glue Gun
When using polyamide adhesives
· Reinforce and insulate soldered parts.
· Fasten capacitors, resistors, etc.
· Fasten jumper wires.
· Perform insulation potting for terminals.
· Fasten the ends of coils.
· Fasten deflecting yokes and variable coils.
No. 106-06
Smoke Absorber / Static Control
Specifications
No. 106-07
No. 106-04
No. 106-02
Major Applications
Designed for precision assembly of delicate,
complex electronic work.
Soft-touch grip ensures long and comfortable
work.
Recommend to cut copper & soft lead wires.
No. 106-05
Desoldering / Rework
Temperature control function enables use of
polyamide adhesives that are ideal for use with
electronic components.
Superior thermal recovery makes the unit tough
enough to handle several operations in succession.
Soldering
Soldering
Glue Gun
Wood
32
32
Paper
Metal
Plastic
Packing
in aluminum foil bag
Adhesives marked with
are more suited for that material than .
in polyethylene bag
in blister pack
* Application Period.
70
71
A built-in very small, but powerful pump eliminates the needs of power cord and air tube.
Easy to handle for continuous pickup.
Anti-static material are used.
Desoldering / Rework
Smoke Absorber / Static Control
Heating Gun / Glue Gun
Other Tools
0.6g
Pump
Diaphragm Type
Bent Nozzle <1.1mm>
2g
Maximum Pressure
37.3kPa (280mmHg)
Bent Nozzle <1.1mm>
Station : 132(W) x 83(H) x 170(D)mm
+ Pad <3mm>
Pen
Bent Nozzle <1.1mm>
: 123(L) x 10 (outer dia.)mm
Air Hose: 1100(L) x 6 (outer dia.)mm
Station : 1.65kg
Pen
+ Pad <7mm>
20g
120g
Packing List
Specifications
Chip resistors and tiny components
Small ICs (8~40 pins)
ICs (40 pins or greater)
Model Name
Model No.
394
Power Supply
Alkaline Battery "AAA" x 2
Dimensions
130(L) x 22(W) x 29(H)mm
Weight (w/o batteries)
43g
Contents
Unit ············································································1
Bent nozzle 1.1mm with stopper (No.A1165) ············1
HAKKO 394
Large electronic components, etc
Pad 5mm (No.A1312) ················································1
Pad 10mm (No.A1311) ··············································1
Alkaline battery "AAA" ···············································2
Replacement Parts
: 25g
Part No.
Name/Description
A1164
Bent nozzle 0.4mm
A1165
Bent nozzle 1.1mm
Contents
A1198
Bent nozzle 0.26mm
Unit ·························································1
A1486
Straight Nozzle 1.1mm
Bent nozzle ·············································2
A1166
(Inner Dia. 0.4mm, 1.1mm)
Packing List
72
*1 26mm x 26mm QFP is pickup for 2 seconds using a 10 mm dia. pad and then released for 1 second. This cycle is repeated continuously until the QFP is no longer
picked up.
*2 This is the time period from the moment 26mm x 26mm QFP starts being pickup using a 10 mm dia. pad to the moment the QFP drops.
Other Tools
Bent Nozzle <0.4mm>
HAKKO 392
Approx. 15 hours
(With alkaline batteries)
Heating Gun / Glue Gun
Nozzle/Pad
5W
Model No.
Approx. 30,000 pickup times
Applicable for Chip Components
(With A1164 Bent Nozzle)
Maximum Item Weight Applications
392
Power Consumption
Weight (w/o cord)
Continuous pickup time*2
Pickup repetition Iimit*1
Vacuum Pickup Performance
Model No.
Dimensions
Smoke Absorber / Static Control
Service Life of Battery
1. Place the nozzle or pad on the object to be picked up.
2. Place a finger over the hole in the pen.
A vacuum is instantly created and the resulting suction at the tip of the pen "holds" the
object to the pen.
3. Now raise the pen and the object is lifted along with the pen.
Specifications
Desoldering / Rework
A built-in diaphragm pump eliminates the need
for a separate air supply unit.
Lifts objects weighting up to 120g.
Pen, suction pads and air hoses are all made of
anti-static materials for greater safety and reduced risk of damage to delicate parts.
Easy To Set Up, Easy To Use
Soldering
Soldering
Vacuum Pick-up
Pickup Power
with stopper
Part No. Name/Description
Pickup Performance
A1166
Pad 3mm
6 gf
A1312
Pad 5mm
40 gf
Pad 3mm
A1167
Pad 7mm
80 gf
A1312
Pad 5mm
A1311
Pad 10mm
120 gf
Pad ·························································2
A1167
Pad 7mm
(Outer Dia. 3mm, 7mm)
A1311
Pad 10mm
with stopper
* The max. pickup performance shown above slightly differs depending on the surface
of the object.
73
A built-in very small, but powerful pump eliminates the needs of power cord and air tube.
Easy to handle for continuous pickup.
Anti-static material are used.
Desoldering / Rework
Smoke Absorber / Static Control
Heating Gun / Glue Gun
Other Tools
0.6g
Pump
Diaphragm Type
Bent Nozzle <1.1mm>
2g
Maximum Pressure
37.3kPa (280mmHg)
Bent Nozzle <1.1mm>
Station : 132(W) x 83(H) x 170(D)mm
+ Pad <3mm>
Pen
Bent Nozzle <1.1mm>
: 123(L) x 10 (outer dia.)mm
Air Hose: 1100(L) x 6 (outer dia.)mm
Station : 1.65kg
Pen
+ Pad <7mm>
20g
120g
Packing List
Specifications
Chip resistors and tiny components
Small ICs (8~40 pins)
ICs (40 pins or greater)
Model Name
Model No.
394
Power Supply
Alkaline Battery "AAA" x 2
Dimensions
130(L) x 22(W) x 29(H)mm
Weight (w/o batteries)
43g
Contents
Unit ············································································1
Bent nozzle 1.1mm with stopper (No.A1165) ············1
HAKKO 394
Large electronic components, etc
Pad 5mm (No.A1312) ················································1
Pad 10mm (No.A1311) ··············································1
Alkaline battery "AAA" ···············································2
Replacement Parts
: 25g
Part No.
Name/Description
A1164
Bent nozzle 0.4mm
A1165
Bent nozzle 1.1mm
Contents
A1198
Bent nozzle 0.26mm
Unit ·························································1
A1486
Straight Nozzle 1.1mm
Bent nozzle ·············································2
A1166
(Inner Dia. 0.4mm, 1.1mm)
Packing List
72
*1 26mm x 26mm QFP is pickup for 2 seconds using a 10 mm dia. pad and then released for 1 second. This cycle is repeated continuously until the QFP is no longer
picked up.
*2 This is the time period from the moment 26mm x 26mm QFP starts being pickup using a 10 mm dia. pad to the moment the QFP drops.
Other Tools
Bent Nozzle <0.4mm>
HAKKO 392
Approx. 15 hours
(With alkaline batteries)
Heating Gun / Glue Gun
Nozzle/Pad
5W
Model No.
Approx. 30,000 pickup times
Applicable for Chip Components
(With A1164 Bent Nozzle)
Maximum Item Weight Applications
392
Power Consumption
Weight (w/o cord)
Continuous pickup time*2
Pickup repetition Iimit*1
Vacuum Pickup Performance
Model No.
Dimensions
Smoke Absorber / Static Control
Service Life of Battery
1. Place the nozzle or pad on the object to be picked up.
2. Place a finger over the hole in the pen.
A vacuum is instantly created and the resulting suction at the tip of the pen "holds" the
object to the pen.
3. Now raise the pen and the object is lifted along with the pen.
Specifications
Desoldering / Rework
A built-in diaphragm pump eliminates the need
for a separate air supply unit.
Lifts objects weighting up to 120g.
Pen, suction pads and air hoses are all made of
anti-static materials for greater safety and reduced risk of damage to delicate parts.
Easy To Set Up, Easy To Use
Soldering
Soldering
Vacuum Pick-up
Pickup Power
with stopper
Part No. Name/Description
Pickup Performance
A1166
Pad 3mm
6 gf
A1312
Pad 5mm
40 gf
Pad 3mm
A1167
Pad 7mm
80 gf
A1312
Pad 5mm
A1311
Pad 10mm
120 gf
Pad ·························································2
A1167
Pad 7mm
(Outer Dia. 3mm, 7mm)
A1311
Pad 10mm
with stopper
* The max. pickup performance shown above slightly differs depending on the surface
of the object.
73
Motor Drive / Lead Straightener
Automatic cutting and forming
Cutting and forming for tape-type axial components
Desoldering / Rework
Smoke Absorber / Static Control
HAKKO 154
· Cutting & Forming
Max. ø5mm
Max.
ø0.8mm
Max.
ø0.5mm
Forming Size
Max.
14.5mm
Specifications
· Forming only
5mm Pitch
Min.
4.2mm
Min.
4.2mm
Model No.
ø0.5mm
Max.
14.5mm
Max.
14.5mm
Rotary
ø0.8mm
Max. 85mm
Min. 5.6mm
Max. 37mm
Min. 5mm
Max. 37mm
5mm
125(W) x 130(H) x 110(D)mm
Weight
· Cutting only
· Cutting only
Dimensions
2kg
Weight (w/o cord)
Other Tools
Easy to use-simply set the taped components in
place and turn the handle. The super-sharp, high
quality cutting blade allows you to cut all types of
tape-type radial parts, including resistors, capacitors, transistors, etc. cleanly and smoothly. Continuous operation ensures faster, more efficient
processing.
Sealed bearings make it long-lasting, durable
and efficient.
The compact design allows you to place it virtually anywhere.
155-2
5.6kg
Low-cost, high-performance tool for reforming IC
and LSI leads.
Speeds IC and LSI insertion.
No more broken leads during IC and LSI insertion or transportation.
Simply insert the IC case into the Dipliner chute,
and the leads are protected right through circuit
board insertion.
Adjustable lead former fits all types, sizes and
makes of ICs and LSIs.
Simple mechanism for maintenance-free operation.
2
Specifications
Max. Processing Part Size
ø12.5mm~25mm
ø15mm~25mm
3
Feed Hole Pitch
12.7mm
15mm
Weight
25mm
ø0.8mm
2
Dimensions
74
155-1
Max. Diameter of Lead Wire
Min. Processing Size
430(W) x 150(H) x 140(D)mm
2
· Cutting only
1
5
18,000 pcs/hr
(w/HAKKO 155)
ø12.5mm
ø15mm
Specifications
Lead Pitch
36,000 pcs/hr
(w/HAKKO 153. 154)
Other Tools
Cutting for tape-type radial components
4
28rpm (50Hz), 34rpm (60Hz)
Max. 50mm
Max. 50mm
* For annealed copper lead only.
Max. Processing Capacity
152B
Heating Gun / Glue Gun
5.6mm Pitch
Compatible Taping Outer Width of Tape
Dimension
Pitch
Part No.
* Combination with HAKKO 153.
* The HAKKO 153 is not included with the HAKKO 152B.
154-1
Max. Diameter of Lead*
Dimensions
· Forming only
Min.
4.2mm
Min.
0.5mm
Min. 5mm
Max. 37mm
153-1
Part No.
Heating Gun / Glue Gun
Max.
14.5mm
Min. 5.6mm
Max. 37mm
Specifications
CAUTION
Max. ø5mm
Min.
4.2mm
Min.
0.75mm
Smoke Absorber / Static Control
HAKKO 153
Constant-torque drive ensures uniform processing quality.
Processes up to 36,000 pieces per hour when
used with the HAKKO 153.154, up to 18,000
pieces per hour with the HAKKO 155.
Speed control knob permits adjustment of the
processing speed.
Desoldering / Rework
Easy to use-simply set the taped components in
place and turn the handle. Ideal for processing
tape-type components.
Improved, longer-life cutting blade for a clean,
smooth cut.
Sealed bearings for longer service life and greater durability and efficiency.
Can be used for forming and cutting, forming
only, or cutting only.
· Cutting & Forming
Soldering
Soldering
Lead Former / Lead Cutter
5.0mm
2.5mm*, 5.0mm
1.5mm from taping end 2.0mm from part end
125(W) x 110(H) x 140(D)mm
1.7kg
* When processing a part with a lead pitch of 2.5mm, be sure to adjust the cutting wheel.
Parts with a pitch of 2.5mm can be processed only on the No.155-1.
5
2.0mm
5
1.5mm
Width of IC
Number of IC Leads
FT100
7.5mm
8, 14, 16, 18, 20
4
FT150
10mm
22
5.0/2.5mm
FT200
15mm
24, 28, 40, 42
3
FT300
19mm
64
1
0.8mm
12.7mm (No.155-1)
15mm (No.155-2)
Model No.
ø4mm
75
Motor Drive / Lead Straightener
Automatic cutting and forming
Cutting and forming for tape-type axial components
Desoldering / Rework
Smoke Absorber / Static Control
HAKKO 154
· Cutting & Forming
Max. ø5mm
Max.
ø0.8mm
Max.
ø0.5mm
Forming Size
Max.
14.5mm
Specifications
· Forming only
5mm Pitch
Min.
4.2mm
Min.
4.2mm
Model No.
ø0.5mm
Max.
14.5mm
Max.
14.5mm
Rotary
ø0.8mm
Max. 85mm
Min. 5.6mm
Max. 37mm
Min. 5mm
Max. 37mm
5mm
125(W) x 130(H) x 110(D)mm
Weight
· Cutting only
· Cutting only
Dimensions
2kg
Weight (w/o cord)
Other Tools
Easy to use-simply set the taped components in
place and turn the handle. The super-sharp, high
quality cutting blade allows you to cut all types of
tape-type radial parts, including resistors, capacitors, transistors, etc. cleanly and smoothly. Continuous operation ensures faster, more efficient
processing.
Sealed bearings make it long-lasting, durable
and efficient.
The compact design allows you to place it virtually anywhere.
155-2
5.6kg
Low-cost, high-performance tool for reforming IC
and LSI leads.
Speeds IC and LSI insertion.
No more broken leads during IC and LSI insertion or transportation.
Simply insert the IC case into the Dipliner chute,
and the leads are protected right through circuit
board insertion.
Adjustable lead former fits all types, sizes and
makes of ICs and LSIs.
Simple mechanism for maintenance-free operation.
2
Specifications
Max. Processing Part Size
ø12.5mm~25mm
ø15mm~25mm
3
Feed Hole Pitch
12.7mm
15mm
Weight
25mm
ø0.8mm
2
Dimensions
74
155-1
Max. Diameter of Lead Wire
Min. Processing Size
430(W) x 150(H) x 140(D)mm
2
· Cutting only
1
5
18,000 pcs/hr
(w/HAKKO 155)
ø12.5mm
ø15mm
Specifications
Lead Pitch
36,000 pcs/hr
(w/HAKKO 153. 154)
Other Tools
Cutting for tape-type radial components
4
28rpm (50Hz), 34rpm (60Hz)
Max. 50mm
Max. 50mm
* For annealed copper lead only.
Max. Processing Capacity
152B
Heating Gun / Glue Gun
5.6mm Pitch
Compatible Taping Outer Width of Tape
Dimension
Pitch
Part No.
* Combination with HAKKO 153.
* The HAKKO 153 is not included with the HAKKO 152B.
154-1
Max. Diameter of Lead*
Dimensions
· Forming only
Min.
4.2mm
Min.
0.5mm
Min. 5mm
Max. 37mm
153-1
Part No.
Heating Gun / Glue Gun
Max.
14.5mm
Min. 5.6mm
Max. 37mm
Specifications
CAUTION
Max. ø5mm
Min.
4.2mm
Min.
0.75mm
Smoke Absorber / Static Control
HAKKO 153
Constant-torque drive ensures uniform processing quality.
Processes up to 36,000 pieces per hour when
used with the HAKKO 153.154, up to 18,000
pieces per hour with the HAKKO 155.
Speed control knob permits adjustment of the
processing speed.
Desoldering / Rework
Easy to use-simply set the taped components in
place and turn the handle. Ideal for processing
tape-type components.
Improved, longer-life cutting blade for a clean,
smooth cut.
Sealed bearings for longer service life and greater durability and efficiency.
Can be used for forming and cutting, forming
only, or cutting only.
· Cutting & Forming
Soldering
Soldering
Lead Former / Lead Cutter
5.0mm
2.5mm*, 5.0mm
1.5mm from taping end 2.0mm from part end
125(W) x 110(H) x 140(D)mm
1.7kg
* When processing a part with a lead pitch of 2.5mm, be sure to adjust the cutting wheel.
Parts with a pitch of 2.5mm can be processed only on the No.155-1.
5
2.0mm
5
1.5mm
Width of IC
Number of IC Leads
FT100
7.5mm
8, 14, 16, 18, 20
4
FT150
10mm
22
5.0/2.5mm
FT200
15mm
24, 28, 40, 42
3
FT300
19mm
64
1
0.8mm
12.7mm (No.155-1)
15mm (No.155-2)
Model No.
ø4mm
75
CHINA HONG KONG
TAIWAN
HEAD OFFICE
4-5, SHIOKUSA 2-CHOME, NANIWA-KU, OSAKA, 556-0024 JAPAN
TEL:+81-6-6561-3225 FAX:+81-6-6561-8466
http://www.hakko.com E-mail:sales@hakko.com
OVERSEAS AFFILIATES
U.S.A.
AMERICAN HAKKO PRODUCTS, INC.
28920 N. AVE. WILLIAMS VALENCIA, CA 91355, U.S.A.
TEL: (661) 294-0090 FAX: (661) 294-0096
Toll Free (800)88-HAKKO
4 2 5 5 6
http://www.hakkousa.com
HONG KONG
HAKKO DEVELOPMENT CO., LTD.
ROOM 1504, EASTERN HARBOUR CENTRE,
28 HOI CHAK STREET, QUARRY BAY, HONG KONG.
TEL: 2811-5588 FAX: 2590-0217
http://www.hakko.com.hk
E-mail:info@hakko.com.hk
Please access to the following address for the other Sales affiliates.
http://www.hakko.com
Specifications and design are subject to change without notice.
Copyright HAKKO Corporation. All right reserved.
CA00350BbBa001 May. 2010
SINGAPORE
HAKKO PRODUCTS PTE., LTD.
1, GENTING LINK #02-04, PERFECT INDUSTRIAL
BUILDING, SINGAPORE 349518
TEL: 6748-2277 FAX: 6744-0033
http://www.hakko.com.sg
E-mail:sales@hakko.com.sg
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising