Partner: LifeSize Model: Icon 800 Device Type: Codec GENERAL INFORMATION SIMPLWINDOWS NAME: LifeSize Icon 800 v1.2 CATEGORY: Conferencing VERSION: v1.2 SUMMARY: This module will control the LifeSize Icon 600 or Icon 800 via TCP/IP. GENERAL NOTES: This module will control the LifeSize Icon 600 or Icon 800 via TCP/IP. Note: This is a 3-Series only module. CRESTRON HARDWARE REQUIRED: 3-Series Processor w/Ethernet port SETUP OF CRESTRON HARDWARE: N/A VENDOR FIRMWARE: LS_RM3_2.2.0 VENDOR SETUP: N/A CABLE DIAGRAM: N/A CONTROL: IR_Remote_<Up/Down/Left/Right> D Pulse to navigate the on screen menu. IR_Remote_Select D Pulse to select the highlighted item in the on screen menu. IR_Remote_Mute D Pulse to turn the mic mute on or off. Volume_<Up/Down> D Press to adjust the volume level. Mic_Mute_<On/Off/Toggle> D Pulse to turn mic mute on or off. Hang_Up_Caller_<1/2> D Pulse to disconnect caller 1 or 2. Dial D Pulse to dial call. Hang_Up_All A Press to hang up all. Answer D Press to answer incoming call. Reject A Press to reject incoming call. Cancel_Call D Press to cancel dialed call. Partner: LifeSize Model: Icon 800 Device Type: Codec Select_Hangup_Caller D Press to display list of remote endpoints in call. Select_Dial_Keypad D Press to display dial keypad. Select_Camera_Controls D Press to display camera controls. Select_Far_Camera_Controls D Pulse to display far camera controls subpage. Select_IR_Functions D Pulse to display ir functions subpage. Select_Inputs D Pulse to display select inputs subpage. Select_Directory D Pulse to display directory subpage. Select_DTMF D Pulse to display dtmf subpage. DTMF_* D Pulse to send out DTMF tones while in a call. <Start/Stop>_Presentation D Pulse to start or stop a presentation. Presentation_Layout D Pulse to scroll through the available presentation layouts. Keyboard_Clear D Pulse to clear the number dial text field. Keyboard_* D Pulse to enter number to dial. Keyboard_Backspace D Pulse to delete the rightmost character in the number dial text field. <Display/Hide>_Keyboard D Pulse to display or hide the dial keyboard subpage. Camera_* D Press to adjust the local camera. Camera_Preset_<1-19> D Pulse to recall preset. Press and hold to store current camera position as the selected preset. Clear_Remotely_Disconnected_Subpage D Pulse to hide the remotely disconnected subpage. Dual_Video_<On/Off/Toggle> D Pulse to turn dual video on or off. Do_Not_Disturb_<On/Off/Toggle> D Pulse to turn do not disturb on or off. Auto_Answer_<On/Off/Toggle> D Pulse to turn auto answer on or off. Auto_Answer_Mute_<On/Off/Toggle> D Pulse to turn auto answer mute on or off. Video_Mute_<On/Off/Toggle> D Pulse to turn video mute on or off. PIP_<On/Off/Toggle> D Pulse to turn pip on or off. Partner: LifeSize Model: Icon 800 Device Type: Codec Call_Type_<Voice/Video/Auto> D Pulse to set call type. Protocol_<H323/SIP/Auto> D Pulse to set the protocol. Bitrate_Auto D Pulse to set bitrate to auto. Bitrate_*_kpbs D Pulse to set bitrate to a specific value. Presentation_Input_* D Pulse to set presentation input. Camera_Switch_* D Pulse to select camera. Camera_Far_* D Press to adjust the far end camera. Directory_List_Select_<1-20> D Pulse to select item in the directory list. Directory_List_Top D Pulse to go to top of directory list. Directory_List_Page_Up D Pulse to scroll through directory list. Directory_List_Page_Down D Pulse to scroll through directory list. Dial_Directory_Call D Pulse to dial selected entry in directory list. Search_Keyboard_Clear D Pulse to clear the search text field. Search_Keyboard_* D Pulse to enter search text. Search_Keyboard_Backspace D Pulse to delete the rightmost character in the search text field. Select_Directory_Search D Pulse to display the directory search keyboard subpage. Clear_Directory_Search_Keyboard D Pulse to hide the directory search keyboard subpage. Initialize D Pulse to initialize communications with the LifeSize unit. Get_Directory D Pulse to get the ldap or local directory. <Local/LDAP>_Directory D Set to 1 to enable one of the directories. Whichever one is selected, the other must be set to 0. Only one can be set to 1, not both. Partner: LifeSize Model: Icon 800 Device Type: Codec FEEDBACK: Volume_Level D Displays current volume level. Mic_Mute_Is_<On/Off> A Indicates current mic mute status. Call_Number_<1/2>_Text A Displays endpoints in the current call. Number_Text A Displays the current dial text. Show_Dialing_Subpage S Displays the dialing subpage. Show_Remotely_Disconnected_Subpage S Displays the remotely disconnected subpage. Show_Call_Failed_Subpage S Displays the call failed subpage. Show_Incoming_Call_Subpage S Displays the incoming call subpage. Display_Camera_Controls_Subpage D Displays the camera controls subpage. Display_Far_Camera_Controls_Subpage D Displays the far end camera controls subpage. Show_Hangup_Subpage D Displays the show hangup subpage. Display_IR_Functions_Subpage D Displays the IR functions subpage. Display_Inputs_Subpage D Displays the input selection subpage Display_Directory_Subpage D Displays the directory subpage. Display_DTMF_Subpage S Displays the DTMF subpage. Incoming_Call_Name_Text D Displays the incoming call text. Incoming_Call_Address_Text D Displays the incoming call address text. Multiple_Calls D Indicates that there are multiple calls connected. Presentation_Is_Started D Indicates that the presentation has started. Presentation_Is_Stopped D Indicates that the presentation has stopped. Call_Is_Connected D Indicates that the call is connected. Call_Is_Disconnected S Indicates that the call is disconnected. Call_Connection_Status_Text D Displays the call connect status text. Partner: LifeSize Model: Icon 800 Device Type: Codec Number_Text_In D Displays the number dial text. Show_Keyboard D Displays the dial keyboard. Show_Dial_Keypad D Displays the dial keypad. Camera_Preset_Stored_Notice D Indicates that a camera preset was stored. Dual_Video_Is_<On/Off> D Indicates that dual video is on or off. Do_Not_Disturb_Is_<On/Off> S Indicates that do not disturb in on or off. Auto_Answer_Is_<On/Off> D Indicates that auto answer is on or off. Auto_Answer_Mute_Is_<On/Off> D Indicates that auto answer mute is on or off. Video_Mute_Is_<On/Off> D Indicates that video mute is on or off. PIP_Is_<On/Off> D Indicates that PIP is on or off. Type_Text D Displays the call type. Protocol_Text D Displays the protocol. Bitrate_Text S Displays the bitrate. Presentation_Input_Is_* D Indicates the current presentation input. Camera_Switch_Is_* D Indicates the current camera switch selection. Directory_List_<1-20>_Text D Lists the directory items text. Directory_List_<1-20>_Is_Active D Indicates if a directory item is selected. Directory_List_Count_Text S Indicates the amount of directory entries available. Search_Text_In D Displays the directory search text. Show_Directory_Search_Keyboard D Displays the directory search keyboard. Is_Initializing D Indicates that the module initializing the unit and getting the current status. Downloading_Directory D Indicates that the module is downloading either the local or LDAP directory. Partner: LifeSize Model: Icon 800 Device Type: Codec PARAMETERS: Endpoint_IP_Address S IP address of the unit being controlled. Endpoint_Port_Number S IP port of the unit being controlled. User_Name S Username used to connect to the unit. Password S Password used to connect to the unit. Number_Directory_Fields D Number of directory fields to display on the touchpanel (5d – 20d) TESTING: OPS USED FOR TESTING: 3-Series: v1.010.0060 SIMPL WINDOWS USED FOR TESTING: v4.02.56 DEVICE DB USED FOR TESTING: v61.00.002.00 CRES DB USED FOR TESTING: v48.05.003.00 SYMBOL LIBRARY USED FOR TESTING: V913 SAMPLE PROGRAM: LifeSize Icon 800 v1.2 Demo PRO3.smw v1.0 – Original release. REVISION HISTORY: v1.1 – Added control of all available cameras. Added control of the far end camera. v1.2 – Added special characters on keyboard. Resolve issue with some characters not displaying properly (i.e. ó, etc.).
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project