English
English
Child Safety Guide
Part No.: RN0332R24010
Congratulations on your purchase! As you enjoy your new product,
please keep these safety tips in mind :
CONTENTS
LED LCD TV
DVD COMBINATION
User's Manual
MODEL
LED32G30RQD
Please keep your sales receipt and keep the record of the serial number
and the date of purchase in order to receive warranty parts and service.
The serial number is located at the back of the TV.
Ajustar Hasta Seguridad
The home theater entertainment experience is a
growing trend and larger flat panel displays and
popular purchases.
- One size does NOT fit all. follow the manufacturer's
recommendation for the safe installation and use of
your flat panel display.
- Un tamaño fijo NO es adecuado para todos. siga las
recomendaciones de fabricante para la instalación segura y
el uso de su monitor de pantalla plana
However, flat panel displays are not always supported
on the proper stands of installed according to the
manufacturer’s recommendations.
- Carefully read and understand all enclosed
instructions for proper use of this product.
- La experiencia de entretenimiento de cine en casa
es una tendencia creciente y los grandes monitores
de pantalla plana son muy populares.
embargo, los monitores de pantalla plana no se
han instalado siempre en los soportes adecuados o
instalado de acuerdo con las recomendaciones de
fabricante.
02
Turning On and Off
07
Safety Precautions
04
Choosing TV Channel
07
Preparation for Your New TV
05
Selecting Input Source
07
Check Accessories
05
Channel Bar
08
Setup TV Table Stand
05
Adjusting Volume
08
Select TV Location
05
EPG (Electronic Program Guide)
08
This Manufacturer Cares!
Connection and Using
05
08
The consumer electronics industry is committed to
making home entertainment enjoyable and safe.
Flat panel displays that are inappropriately situated
on dressers, bookcases, shelves, desks, speakers,
chests or cats may fall over and cause injury.
- Don't allow children to climb on or play with
furniture and television sets.
- Los monitores de pantalla plana que se han
instalado inadecuadament en tocadores, estanterías,
estantes, escritorios, oradores, baúle s o carros se
pueden caer y causar el daño corporal.
- Don't place flat panel displays on furniture that can
easily be used as steps, such as a chest of drawers.
- Remember that children can become excited while
watching a program, especially on a "larger than life" flat
panel display. Care should be taken to place or install
the display where it cannot be pushed, pulled over, or
knocked down.
¡Al Fabricante le Importa
- Care should be taken to route all cords and cables
connected to the panel display so that they cannot be
pulled or grabbed by curious children.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. For example, do not use
near a laundry tub, in a wet basement, or near a swimming pool,
and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions. Slots and openings in the cabinet
back or bottom are provided for ventilation, to ensure reliable
operation of the TV and to protect it from overheating. These
openings must not be blocked or covered. The openings should
never be blocked by placing the TV on a bed, sofa, rug, or other
similar surface.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus.
19. This TV should never be placed near or over a radiator or heat
resource. This TV should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
05
Quick Menu
08
Wall Mounting :
Side Panel Connections
05
Channel Menu
08
Connecting AV Composite video device
05
Picture Menu
08
- Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL,CSA,ETL).
- Follow all instructions supplied by the display and wall mount manufacturers.
- Use una montura que se ha recomendadop or el fabricante de monitor y/o listado por un laboratorio
independiente(como U L, CSA, ETL).
- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.
Connecting YPbPr Component device
06
Audio Menu
09
- If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
Connecting HDMI device
06
Time Menu
09
unsure, contact a professional installer.
Setup Menu
09
- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monitor de pantalla plana,
contacte a su distribuidor para la instalación profesional.
- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la pared
no son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque de
ceniza. Si usted está inseguro, contacte a un instalador profesional.
Lock Menu
10
1 2
2 3
Montaje de Pared: SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE
IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS :
- A minimum of two people are required for installation. Flat panel displays can be heavy.
- Por lo menos dos personas se requieren para la instalación. Los monitores de pantalla plana puede ser pesados.
TV Jacks Explanation
06
Keypad and Front Panel
07
Frequently Asked Questions (FAQs)
11
Keypad Buttons
07
Troubleshooting
12
Fcc Information
Front Panel
07
Wall Mounting Unit Specification
13
USB Media Play
13
Product Specification
14
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
Warranty Card
14
Caution and Warning
FCC Notice
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may ca use harmful interference to radio
Communications.
However, there is no Guarantee that interference will not occur in
a particular installation.
This will prevent damage to the TV due to lightning and power line
surges.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This TV should be operated only from the type of power supply
indicated on the rating label.
If customer is not sure the type of power supply in your home,
consult your appliance dealer or local power company. For TV
remote control battery power, refer to the operating instructions.
16. The TV set shall not be exposed to dripping or splashing. No
objects filled with liquids, such as vases, shall be placed on the TV set.
TV LED32G30RQD supports various connections to other
devices (such as DVD, VCR, Set-top box, etc.). Please follow the
table to choose the cables which adapt to your device.
Connection and Using
(Better Video Quality)
To connect a component device, such as a DVD player, follow
these steps:
1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to
the video output jacks of device via video cable (green, blue and
red).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.
Note: Y/Pb/Pr jacks are component video. This kind of video signal
has better display quality.
4 5
Note: HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on
ANT/CABLE jack of the back panel. You are ready to receive off-air
local digital and analog channels.
C. Set-Top Box
If you use a set-top box, you may need to call your cable company
or satellite service provider, which use a special connection, please
refer to the user’s guide of set-top box.
Note: Do not plug the AC cord until you have accomplished all the
connections. This TV does not support QAM under cable channel
search.
Component Video Connection
Caution: Unplug the AC cord when you connect other devices to
TV.
The first step in connecting your TV is obtaining the signal. Your
TV LED32G30RQD has a back panel, which allows you to receive
analog and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable
service to obtain the signal.
Connect the antenna to TV via coaxial cable on ANT/CABLE jack
of the back panel. You are ready to receive air local digital and
analog channels.
Step one: Insert the M6 mounting screws into the upper two wall
mounting screw holes and fasten them (Figure B).
Step two: Insert anchors to wall and connect the bolts and anchors
with ropes or chains (Figure C).
COMPONENT Y/Pb/Pr: Connect a device that has component
video jacks, such as a DVD player. To access device connected
to the Y/Pb/Pr jack, press the INPUT button on your remote; then
press the up/down arrow to select Component. Press the OK button
at last to confirm.
Y/Pb/Pr (Component Video): They provide good picture quality
because the video signal is separated into three components. Use
three video-grade or component video cables for the connection.
When using Y/Pb/Pr, make sure you connect left and right audio
cables to the AUDIO IN R/L jacks.
L-AUDIO-R, COMPOSITE: Connect an AV device that has
composite video jacks, such as a VCR or a DVD player. To access
device connected to these jacks, press the INPUT button on your
remote; then press the up/down arrow to select AV. Press the
ENTER button at last to confirm.
AUDIO IN L: Left audio channel connection. The left audio
connector is usually white. For mono audio sources, be sure to
use the left AUDIO INPUT.
AUDIO IN R: Right audio channel connection. The right audio
connector is usually red.
ANT/CABLE: Connect to receive the signal from your antenna or
cable via coaxial cable.
Digital Audio out: Connect a coaxial cable for digital audio
output.
Connecting YPbPr Component device
6
A. Antenna
Caution: Pushing, pulling or climbing on the TV may cause the TV
falling. Do not let children climb or hang on the TV. Always place the
TV on a sturdy, level, stable surface that can hold the weight of TV.
And if possible, secure the TV according to the instruction below
(Note: The fastening components such as screws are not supplied
with TV).
6
After placing your TV properly, you can connect the TV with power
supply and cable components. For further information, see page 5
to page 6.
TV Signal Connection
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Device complies with FDA radiation performance standards, 21
CFR subchapter.
Caution: (Invisible) Laser Radiation when open.
Do not stare into beam.
Front Panel
About remote control
working distance and
angle, see the quick
start guide
Remote Control Sensor
connected to the device supporting ARC, transmit the TV sound to the device.
Select a flat, stable table to place your TV set. Please follow the
safety instructions when placing the TV.
25. If an outside antenna or cable system is connected to the TV,
be sure the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges.
Safety Strap
The picture below is an example of a connection using the HDMI
video jack.
Select TV Location
24. To reduce the risk of electric shock, the grounding of center pin
of plug must be maintained.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
For added protection for this TV receiver during a lightning storm,
or when it is left unused for long periods of time, unplug it from the
wall outlet and disconnect antenna or cable system.
Check Accessories
23. WARNING: To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the installation
instructions.
A TV and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the TV and
cart combination to overturn.
HDMI Connection
Choose Your Connections
Please refer to Quick Start Guide to carry out stand installing.
22. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
HEAD PHONE: Connect a 3.5mm headphone for personal audio.
USB: Connect your USB storage device to enjoy music/photo files
on your TV. (Also used for service purpose).
HDMI IN
HDMI1/DVI, 2: (High-Definition Multimedia Interface) It provides an
uncompressed digital connection that carries both video and audio
data by way of an integrated mini-plug cable.
MHL: (Mobile High-Definition Link) To standard HDMI input, transmit
the video/audio from portable electronic device (cellphone,digital
camera, digital-video camera,) to TV set.
ARC: (Audio Return Channel) Adopted in TV output of digital audio, can be
Setup TV Table Stand
21. Do not attempt to service this TV by yourself because opening
or removing covers may expose you to dangerous high voltage or
other hazards. Refer all servicing to qualified service personnel.
Section 810 of the National Electrical Code, ANSI/NFPA NO.70,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrodes. (See figure A)
2. HDMI-DVI cable transfers only video signal from DVI port of
DVI device to HDMI jack of TV. For audio signal, please connect
audio output to L-AUDIO-R jack on TV back panel.
Cable Connections
Before Turning On TV
Check the accessories that are packed with your TV.
(refer to Quick Start Guide)
20. Do not place this TV on an unstable cart, stand, tripod, bracket,
or table. The TV may fall, causing serious injury to someone, and
serious damage to the appliance.
- El cuidado se tiene que empezar por encaminar todos
los cordones y cables conectados al monitor de pantalla
plana para que no se puedan tirar o agarrar conectados
al monitor de pantalla plana para que no se pueden tirar o
agarrar por los niños curiosos.
Cable Connections
Preparation for Your New TV
18. Unplug the TV from the wall outlet before cleaning. Do not use
liquid or aero cleaners. Use a damp cloth for cleaning.
- Recuerde que los niños pueden llegar a ser excitados al ver
una programación, especialmente en el monitor de pantalla
plana "más grande que vida". El cuidado se tiene que
empezar por poner o instalar el moniotr donde no se puede
empujar, detener al castado del camino ni echar abajo.
08
MADE FOR TODAY
1. Read these instructions.
- No cloque los monitores de pantalla plana en el mueble
quese puede usar fácilmente como escalón, así como una
cómoda.
Adjust the OSD Screen
Date of Purchase
17. Never push objects of any kind into this TV through openings
as they may touch dangerous voltage or other electrical parts that
could result in fire or electric shock. Never spill liquid of any kind into
the TV.
- No permita a los niños a subir al equipo o jugar con
muebles y televisiones.
05
Serial Number
Safety Precautions
- La industria electrónica del consumidor está
comprometida a hacer el entretenimiento de casa
agradable y seguro.
- Lea con cuidado y entienda todas las instrucciones
adjuntas para el uso propio de este producto.
TV Signal Connection
How to obtain various kinds of Input Sources 06
Please register your product at www.rca.com
El Cómo y Doónde Usted usar Su
Monitor de Panntalla Plana
Marca La Diferrencia
Posibles Problemeas
Caution and Warning
OSD Menu Operations
It makes A Difference How and Where
You Use Your Flat Panel Display
!
SEGURIDAD
DE NIÑOS:
Tune Into Safety
02
07
¡Muchas gracias por su uso del presente producto!
Cuando usted disfruta de su nuevo producto, por favor tenga
en cuenta los consejos de seguridad:
CHILD
SAFETY
The Issue
Child Safety Guide
Basic Operations
Guía de seguridad para niños
!
The picture below is an example of a connection using the component
video jack.
5 6
6 7
Side Panel Connections
Connecting AV Composite device
Keypad and Front Panel
Keypad Buttons
How to Obtain Various Kinds of Input Sources
After connection is done, press INPUT button on remote control
or TV top panel to choose the input source you need. See page 7,
Basic Operation of TV.
(Good Video Quality)
Composite connector will be shared with Component Y connector.
To connect a composite AV device, such as a DVD player, follow
these steps:
If you cannot locate your remote, you can use the keypad buttons
on your TV to operate many TV features.
TV Jacks Explanation
Note: AV signal belongs to composite video. This kind of video
signal has regular good display quality.
Composite Video Connection
The picture below is an example of a connection using the
composite video jack.
Power/Standby Indicator: Light up in red when the TV is in
standby mode. Light out when the TV is on.
Remote Control Sensor: Remote control IR sensor, which
receives infrared ray sent by remote control.
Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775
Basic Operations
Turning On and Off
Connect the AC cord to power the LED LCD TV. At this time the
TV will enter standby mode and power indicator will turn red. Use
Power button ( ) on the top panel of TV or on the remote control
to turn on the TV. After switching off the TV for 5 seconds, you can
turn on TV again.
Choosing TV Channel
Tuning To Analog Channels
an analog channel has a channel number beginning with “A”.
Input the digital number with numeric buttons directly and press
OK button to confirm. For example, to watch analog channel “A51”,
press “5”, “1”, “OK” on remote control in sequence.
Note: Although there is no analog TV signal available in America,
we reserve ATV functions for some expansible use.
Tuning To Digital Channels
1.Connect the COMPOSITE jack on the side of TV to the video
output jacks of device via video cable (yellow).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.
Power/Standby Indicator
Connecting HDMI device
(Best Video Quality)
Displays the Source Select List.
To connect a HDMI device, such as a DVD player, please Connect
the HDMI1/DVI/MHL, 2/ARC jack on the side of TV to the output
jacks of device via HDMI cable.
To connect a DVI device, via DVI port of PC or Device and HDMI
jack of TV:
1. Connect the HDMI1/DVI/MHL jack on the side of TV to the DVI
port of PC via HDMI-DVI cable.
2. Connect the L-AUDIO-R jack on the side of TV to the audio
output jack of computer with audio cable (dual-channel RCA jacks
to 3.5mm stereo jack or the L-AUDIO-R jack).
To connect an ARC HDMI OUT device, please connect to the HDMI
input port of the device such as amplifier,
Note: 1. HDMI (High-Definition Multimedia Interface) is a compact
audio/video interface for transmitting uncompressed digital data. It
carries the audio and video signal via the same cable and has the
best display quality.
Displays the TV Main Menu.
Scans up through the channel list.
In the TV menu system, it acts like the up arrow on the
remote control and can be used to select menu options.
Scans down through the channel list. In the TV menu
system, it acts like the down arrow on the remote
control and can be used to select menu options.
Increases the volume. In the TV menu system, it acts
like the right arrow on the remote control and can be
used to select menu options.
Decreases the volume. In the TV menu system, it acts
like the left arrow on the remote control and can be used
to select menu options.
Turns the TV on and off.
A digital channel has a channel number beginning with “D”. Input
the main digital number with numeric buttons directly, then press
“-” button on remote control, and input the sub number at last.
For example, to watch analog channel “D31-1”, press “3”, “1”, “-”,
“1”, “OK” on remote control in sequence.
Changing Channels Directly You can use CH button to increase
channel number and CH to decrease channel number.
When no OSD (On Screen Display) is used, the up/down arrows
can also work as CH /CH buttons.
Selecting Input Source
Press INPUT button on remote
control to display Source Select list.
Use up/down arrows to highlight the
source you need and press OK to
confirm.
DVD
USB
Move
OK Select
Quick Menu
Channel Bar
Press the OK button on the remote control, when OSD (on-screen
display)is not used, the channel bar will appear on the Bottom of the
screen. It displays the current channel’s information. The following list
describes the items on the channel bar.
D14-1
Air
4:3
ATSC-1
English
480i
Jan-01 07:10 Sat
A2
Air
CC
D14-1/A2
ATSC-1
English/Stereo
480i/480i
4:3/CC
Jan-01 07:10 Sat
PICTURE
If the channel is analog, A is displayed. If
it’s a digital channel, D is displayed. For
example, in the pictures above, A2 is an
analog channel, and D50-1 is a digital
channel ( -1 is a sub-channel number).
Display the current TV signal type.
Displays whether the current channel is
being broadcasted in stereo or mono. If
the current channel is digital, this space
will be SAP (Second Audio Program)
language.
Displays the signal resolution.
Displays the screen aspect ratio.
Display the CC status (on or off).
Color Mode
Warm
Screen Size
Wide
Noise Reduction
Low
Dynamic Contrast
Low
Video Style
Video
Picture Mode
ATV
Move
Closed Caption
Off
Sleep Timer
OK
Select
MENU
OK
Select
MENU
Return
Use up/down to choose the function you need, press OK or right
arrow to adjust or enter a sub-menu. the detailed explanation are
shown below. If available, use the text at the bottom of each screen
for help.
Picture Mode
Choose the preset visual mode of your TV:
Standard, Movie, User, Dynamic, Power Saving.(Only in User mode
you can adjust Brightness, Contrast, Color, Tint and Sharpness.
Changes to Power Saving mode can decrease the power
consumption.)
• Brightness: Adjust the brightness of picture.
• Contrast: Adjust the contrast of color.
• Color: Adjust the richness of color.
• Tint: Adjust the balance between red and green level (only
available in NTSC signal).
• Sharpness: Adjust the sharpness level of picture.
Channel List
Move
Return
Channel Menu
The Channel Menu enables you to search, view and edit channels.
It is available in TV mode only. Press MENU and choose CHANNEL
from the Main menu. Press the OK/down button to proceed to
CHANNEL menu.
Color Mode
Displays current program date and time.
Adjusting Volume
Auto Scan
Press the VOL+/VOL- button on the remote control to adjust the
volume. If you want to switch sound off, press MUTE. When OSD
(On Screen Display) is not used, the arrows left/right can also work
as VOL-/VOL+ buttons.
Show / Hide
8 9
This option allows you to select one of three automatic color
adjustments: Cool for a bluer palette of picture colors; Normal or
Warm for a redder palette of color.
Screen Size
Screen Size: Select a screen aspect ratio. (Available ratio: Wide,
Cinema, Zoom, and Normal.) Please choose the ratio that applies
to your video signal format best.
Channel List
CHANNEL
Signal Type
Air
DTV Signal
Good
Noise Reduction
Set noise reduction as Off/low/Medium/High.
EPG (Electronic Program Guide)
Dynamic Contrast
Set dynamic contrast Off/low/Medium/High.
Press EPG button on the remote control, the electronic program
guide will appear in the center of screen. The electronic program
guide gives the TV program playing project. You can use left/right
arrows to switch pages.
Use up/down to choose the function you need, press OK or right
arrow to adjust or enter a sub-menu. The detailed explanation are
shown below.
Video Style
If you connect the HDMI/DVI port of PC to HDMI jack of the TV
and the video signal is 1080p, please choose the compatible
video style: Video, Graphic.
Note: Noise reduction helps to reduce the picture “static” or any
type of interference. This feature is especially useful for providing a
clearer picture in weak analog signal conditions.
Auto Scan
Audio Menu
OSD Menu Operations
Adjust the OSD Screen
The OSD (On Screen Display) menu enables you to approach to the
TV functions.
To use OSD menu system, press OK button on remote control, then
use left/right arrow to highlight an option from QUICK, CHANNEL,
PICTURE, AUDIO, TIME, SETUP or LOCK and press OK/down
button.
Press the up and down arrow to move to a different option within
each menu. If necessary, press OK or right arrow to display the
choices of the option you’ve highlighted. If available, use the text at
the bottom of each screen for help. To return to the previous menu,
press the MENU button.
To exit the OSD menu:
• Press the HOME button. The menu will clear from the screen.
• Press the MENU button repeatedly until the menus disappear.
Frequently Asked
Questions (FAQs)
What’s the most convenient way to view High Definition (HD)
video?
Connect an antenna to the TV Input jack to view free local digital
channels. You may need to purchase an antenna. (See page 5 for more
information about antenna setup).
Visit www.antennaweb.org for assistance in deciding what type of
antenna to use to receive the local digital channels available to you.
After entering your location, this mapping program tells you which local
analog and digital stations are available using a certain antenna.
Are there other ways to view High Definition(HD) video?
Besides using an antenna as mentioned above, you can also use a settop box to receive digital video. Contact your cable service provider
or satellite provider to purchase digital programming and have them
connect the box to ensure you are viewing channels in the best way.
How do I tell an analog channel from a digital channel?
Press the OK button to display the Channel Bar. When no OSD
(On Screen Display) is used,Look at the topright corner of the screen.
An “A” is displayed for an analog channel.A “D” is displayed for a digital
channel. Note: Since the analog TV inAmerica has been cut off, we
reserve analog TV function only for some unexpected use.
Why are there bars on my screen, and can I get rid of them?
Most digital video is sent in a 16/9 format which fills your screen, but
is sometimes sent in 4/3 which does not fill your screen. It depends
on how the station or device connected to your TV is formatting the
video. If there are bars on the screen, Check Screen size in the picture
mode to try a different format that may eliminate the bars. Some bars
can't be removed because of the way the format is sent by the
broadcaster. The format changes as you choose screen size type in the
picture mode and the format type is displayed at the bottom of the screen.
For more information on screen size, go to page 9.
Why does channel search find a lot of channels, but when I
try to tune to them, there’s nothing there?
Some channels don’t carry programming, such as video On Demand.
When channels are unavailable, your TV screen is blank or appears like
snow. You probably want to remove these channels from your channel
list. Remove these in the Channel List Menu. Go to page 8 for more
information.
Why does it take a long time when I search the channels
at first time?
If you have both analog and digital channels, the TV is looking for all
available channels in the channel list. If you do have digital channels, the
TV is also searching for scrambled channels, non-scrambled channels,
and each sub-channel of that digital channel.
Troubleshooting
Identifying Problems
If there are any problems when using the product, please consult the
list below. If the list does not solve the problem, call our Customer
Service Center immediately.
TV Problems
The TV can’t be turned on.
Make sure the AC cord is plugged in.
- Check the wall outlet, make sure the AC output works normally
and stably.
- The side panel may be locked (disabled). Use the remote control
to turn on the TV.
- Select the Keypad Lock function in the PARENTAL control Menu
and press OK to uncheck the locking status.
There is no picture or sound but the TV is on and there is a “No
Signal” sign on screen.
- Are you trying to use an input source with no device connected
to it? For using other video/audio device, make sure the external
Move
OK
Select
Digital Caption Type
Press left/right arrow to select digital closed caption type:
Service1, Service2, Service3, Service4, Service5, Service6.
Surround
Creates a 3D sound surround from standard stereo material, with
deep and rich enhancement.
Digital Caption Style
Press left/right arrow to go to digital closed caption style sub-menu,
to select the closed caption style. Select the item you want to adjust
in Digital CC Style menu with up/down arrows. After changing, you
can preview the caption style in the bottom.
• Mode: Decide whether you can change the settings on the CC
Display Style.
• CC Size: Set the CC font size (Default, Normal, Large, Small).
• CC Font: Set the CC font (Default, Font 0 - 7).
• CC Opacity Color: Set the CC opacity color (Default, Solid,
Flashing, Translucent, Transparent).
• Text Color: Set the CC text color (Default, White, Red, Green,
Blue, Yellow, Magenta, Cyan).
• CC Background Opacity: Set the CC background opacity (Default,
Solid, Flashing, Translucent, Transparent).
• CC Background: Set the CC background color (Default, White,
Red, Green, Blue, Yellow, Magenta, Cyan).
Audio Only
Press OK button to activate audio only mode. The TV will output only
sound and the LED LCD panel will be turned off. To restore normal
playing, hold POWER button for three seconds.
Auto Volume
Sound Mode
QUICK MENU
Press left/right arrow to select caption display cc on or cc off.
Set the audio output type as Off, PCM or Raw. Please set this
option according to your power amplifier.
Picture Mode
Stereo
480i
Jan-01 07:10 Sat
DTV
Caption Display
Digital Audio Output
The Quick Menu contains menus and provides you a quick way to
approach the main settings that may be most possibly and frequently
approached. Press MENU on the remote and then you will see the
Quick Menu showing on your screen. Press the down button to
proceed the Quick Menu. Use up/down to choose the function you
need, press OK to enter a sub-menu and press left/right arrow to
adjust a sub-menu.
MENU
Return
The Audio Menu lets you adjust audio output. To access the
Audio Menu, press MENU on the remote, and then select Audio
from the Main Menu. Press OK/down button to proceed to Audio
menu. Use up/down to choose the function you need, press OK
or right arrow to adjust or enter a sub-menu.
Execute an auto channel search.
Show / Hide
Enter sub-menu and press OK to show or hide the TV channel.
Channel List
Displays a channel list. It shows the current channels. Press OK to
go to TV channel directly in sub-menu.
Sound Mode
Choose the preset sound mode of your TV:
Standard, Soft, User, Dynamic. Only in User mode you can adjust
Bass, Treble, Balance.
• Bass: Adjust the bass component of TV sound.
• Treble: Adjust the treble component of TV sound.
• Balance: Adjust the balance between the left and right channel.
Signal Type
Select your TV signal type: Air or Cable.
DTV Signal( In DTV Mode)
Display how strong your TV signal is.
Picture Menu
The Picture Menu contains menus and controls to configure the
way the picture appears. The Picture Menu options apply to the
video for the main TV and VIDEO INPUT selections. All picture
options can be applied to each input.
Press MENU on the remote. Select Picture from the Main menu.
Press the OK/down button to proceed to PICTURE menu.
Audio Language
Select digital TV audio language type: English, French or Spanish
(only available for DTV channel).
Analog Audio Output
Select analog TV audio sound type: Stereo, Mono or SAP (only
available in TV mode).
device works normally first, then press INPUT and choose the right
input source.
- The Signal Type option may be set incorrectly. Go to page 8 for
detailed instructions.
- The channel may be blank. Try to search the channel again or
change another channel.
The Remote control doesn’t work.
- There may be an AC power failure or the power cord unplugged
in.
- Something might be blocking between the remote control and the
remote sensor on the front panel of the TV. Make sure there is a clear path.
- The remote may not be aimed directly at the TV.
- The batteries in the remote may be weak, dead, or installed
incorrectly. Put new batteries in the remote.
The sound is fine, but the picture is poor.
- If you can only get black and white pictures from external device
that you've connected to your TV, maybe it is due to the video
cables is not connected well, or they are connected wrongly.
Check the connection stability first, then check the correctness.
For AV input, the yellow video cable connects to the yellow Video
In jack on the side of your TV.
For Component input, the three Y, Pb, Pr video cables (red, blue,
and green) should be connect to the corresponding input jacks
on the side of your TV.
- Check the antenna connections. Make sure all of the cables are
firmly connected to the TV jack on side of your TV.
- Try adjusting the color features to improve.
You are experiencing problems with V-Chip/Parental Controls.
- If the rating limits don’t work, you must lock the settings. Go to the
Main Menu (press MENU on your remote), select PARENTAL control to
check the settings.
What else can I do?
If you’ve been through the Troubleshooting section and nothing has
fixed your problem, try rebooting your TV.
Note that after a reboot, you may need to run your TV through the
setup process again. To reboot, unplug the power cord from the wall
outlet or power strip.
Keep your TV unplugged for about 5 minutes. Then plug in the TV and
turn it on. See if the problem is fixed.
If the problem remains, then please visit the Customer Support Menu at
www.rca.com or updated FAQs or contact RCA Customer Support at
the support number provided in your Warranty card.
There is no sound, but the picture is fine.
- The sound might be muted. Try pressing the MUTE button to
restore sound.
- For using AV or Component, remember to connect the device’s left
and right audio output correctly. The left channel cable is white and the
right channel cable is red. Please match the cables and jacks according
to their colors.
- The sound settings may not be set correctly. Go to page 9 for
more information.
- If your audio source has only one jack or is a (mono) audio source,
make sure you have plugged the connection into the Audio In L jack
(white) on the TV.
Wall Mounting Unit Specification
- It may be a weak station. Use the AUDIO Menu and set Analog Sound as
Mono.
A black box appears on the screen.
- Closed captioning might be on. Check Closed Caption in the SETUP
menu. Go to page 10 for more instructions.
Problems with the HDMI Connection.
- Make sure the HDMI device (DVD, video gamer, etc.) is turned on and the
cables are firmly connected.
If problems still occur, turn off your device and reconnect it. Reset the
power by unplugging the power cord and plugging it again.
- If a “No Signal” message appears on screen , the HDMI device
isn’t responding. Contact the manufacturer of the HDMI device for
further assistance.
- If you have black bars on each side of your picture (which
means the TV can not display a full-screen image), the device you
connected might have a switch or a menu option allowing you to
change the picture quality output that will fix this. Choose either
720p or 1080i.
All reset
Press OK button to execute reset to TV system. All the settings
will be reset to factory default.
Note: The OSD’s appearance and color are referred to the actual
appliance.
Time Menu
The Time Menu lets you change the TV time settings. To
access the Time Menu, press MENU on the remote, and then
select Time from the Main Menu.
Use up/down to choose the function you need, press OK or right
arrow to adjust or enter a sub-menu. explanation are shown below.
Blue Back
Press OK button to select Blue Back on or off. If the Blue Back is
turned on, the TV will display a blue background when there is no
signal input.
Sleep Timer
Set the sleep timer(Off, 5, 10, 15, 30, 60, 90, 120, 180, 240 Min).
The TV will automatically enter standby mode after times up.
Showing the country’s time zone. you can Set Time zone Off
Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Samoa,
Newfoundland, Atlantic.
9 10
Auto Clock
Wake Up
Set the Wake Up time for your TV. after enters menu, you can
use the up/down and left/right arrow on the remote control to
adjust it.
Change PIN
Input Block
Keypad Lock
LOCK
Parental
Control
The Setup Menu lets you config the TV with your preferences. Select
SETUP from the Main Menu. Press OK/down button to proceed to
SETUP menu.
Use up/down to choose the function you need, press OK or right
arrow to adjust or enter a sub-menu. The detailed explanation are
shown below.
Clear Channel List
Move
OK
LED32G30RQD
VESA 200 x 100
To choose your menu language, press the left/right arrow until
the language you need appears. Available languages:
English, French and Spanish.
To choose your menu transparency mode, press the left/right
arrow until the transparency you need appears: 0%, 25%, 75%,
100%.
Closed Caption
4. If spare parts of different specifications (such as screws) are
used during mounting, consult with qualified professionals to
make sure these parts are safe and effective.
Media Support Specification
Photo
JPG/JPEG files
Music
WAV files
Movie
MPG files
Supported USB storage/file system format
7. Do not place the TV near anything dripping. Transducers and
high voltage wires should be kept far away from the apparatus
too. Or else, it may cause creepage, electric shock or bad
resonance.
USB Storage
USB flash drive
File System format
FAT32
Caution: Do not turn off the TV or disconnect USB storage device
while the TV is playing back picture or music.
This may result in loss of data or damage to the USB storage
device, and RCA is not responsible for any damage to, or loss of,
data on the USB storage device.
8. Do not place TV in a location where collision or vibration is
liable to happen.
9. In order to avoid unexpected falling of the TV set, do not put
any strong force on TV or wall mount after installing.
10. Be sure to unplug the TV before installing. Keep anything hard
or sharp away from the screen panel to prevent the scuffing.
Product Specification
11. After installing, if there is any need to move the cabinet, please
contact the qualified professionals.
Model
LED32G30RQD
Diagonal Display Size
31.5 inches
American TV standard
ATSC/NTSC system
Television System
USB Media Play
Channel Coverage
Temperature
Humidity
Power Supply
RF input
1314
Connection
Interface
Video input
Audio input
Audio output
Component/HDML mode
With stand
Dimensions
Without
stand
Note
A. The wall mount is not contained in the accessories sold with television.
We only provide the installing specifications but not the wall mount itself.
If you need the mount, please consult with the local dealer for a VESA
damage to device or people.
- Press arrow (
) to select “Photo” and press “OK”.
- The file or folder list will show up. Press arrow(
) to select a
file or folder. Press “OK” , and you will be given several options to
view photo files.
- You can directly open and playback the file. View thumbnails for
photo preview, or play slideshow.
C. We suggest that you keep your TV at least 2.36 inches(60mm) from the
wall to prevent cable interference.
Playing back Music files
wall mount.
B. We strongly suggest to set the wall mount with equipments of
specification we ordered. If not, inappropriate installing may cause
Warnings
1. Do not set up the wall mount by yourself. Please contact
qualified professionals for installation.
2. The TV should not be mounted on walls or surfaces which have
an angle more than 10 degrees with vertical direction. Otherwise
the TV set may fall.
3. The walls for mounting must have enough strength to hold the
whole weight of TV set. For example, concrete wall and brickwork
are eligible. Do not place the mount on soft walls such as earth
walls and plasterboard.
Weight
With stand
Without
stand
Power Consumption
Playing back Photo files
- Press arrow (
) to select “Music” and press “OK”.
- The file or folder list will show up. Press arrow(
) to select a
file or folder. Press “OK” to playback the music file you selected.
Playing back Movie files
- Press arrow (
) to select “MOVIE” and press “OK”.
- The file or folder list will show up. Press arrow(
) to select a
file or folder. Press “OK” to playback the movie file you selected.
Playing back Text files
Similar to the photo menu. You can use TEXT menu to access and
display text on your RCA TV.
Return
Supported Files
6. Do not place any heating source under your television. Or else,
it can cause fire.
TEXT
D
Directed to Children 7
Years and Older
General Audience
L
Adult Language
S
Sexual Situations
TV-Y7
TV-G
TV-PG
Parents Guidance Suggested V
TV-14
Parents Strongly Cautioned
select your remote: Off, remote1 or remote2. this is for special
purpose.
DVD Operations
Violence
FV Fantasy Violence
DVD mode of TV LED32G30RQD
TV-MA Mature Audience Only
TV LED32G30RQD has a built-in DVD player module, which
you can use to watch DVD disk. The following operation guide
gives the DVD module instruction.
Movie Rating
Use arrow keys to select the rating level you want to block, press
OK to lock/unlock the rating level. If you have blocked a lower level
rating, the higher ratings will be blocked too. For example, when
PG-13 is blocked, R, NC-17 and X will be blocked at the same
time.
Rating
G
General Audience (no restrictions).
Parental guidance suggested.
X
Press INPUT button on remote control, select “DVD” in the Source Select
menu (see page 7), then press OK or right arrow to enter DVD mode. The
DVD will start playing automatically if there is a disk in DVD module. If not,
the TV will display a standby screen as shown. And a “No Disc” message
will appear on screen.
Note: The TV will turn to DVD mode automatically when you insert a disk, no
matter which mode it is now.
Detail
PG
R
1. How to enter DVD mode for TV LED32G30RQD
Parents strongly cautioned.
Restricted. Children under 17
should be accompanied by an adult.
2. Insert a disk to DVD player
1011 Insert the DVD disk with reflector surface facing the front of TV.
No children under age 17.
Adults only.
Press OK or right arrow to enter Canada V-Chip ratings menu,
which contains two sub-menus: English Rating and French Rating.
English Rating
Press OK to enter English rating menu. Use arrow keys to select the
rating level you want to block, press OK to lock/unlock the rating
level. If you have blocked a lower level rating, the higher ratings will
be blocked too. For example, when PG is blocked,14+ and 18+ will
be blocked at the same time.
Disk reflector surface facing the front of TV.
Note: Do not insert with much strength. Insert disk gently and the DVD
module will load in the disk automatically.
Detail
C
Programming intended for children under age 8.
C8+
Programming generally considered acceptable for
children 8 years and over to watch on their own.
G
General programming, suitable for all audiences.
PG
Parental Guidance
14+
Programming contains themes or content
which may not be suitable for viewers under age of 14.
18+
Adult programming
3. DVD control
You can control the DVD playing with keypad on DVD module or with
remote control. For operating information, see the follow.
EJECT : Ejects or loads the disk from DVD module.
STOP : Stops the DVD playing.
PREV : Goes back to the previous chapter of DVD.
PLAY/PAUSE : Plays or pauses the DVD disk.
NEXT : Skips to the next chapter of DVD.
ZOOM: Zooms the size of screen.
About DVD control buttons on remote control, see the quick start guide
of accessories with your TV.
Press OK to enter French rating menu. Similar with English Rating.
Rating
G
8ans+
13ans+
16ans+
Play/pause the disk: After inserting the disk to DVD module, the TV will
play DVD disk automatically. You can use P L A Y / PAUSE button to
suspend the playing. Press PLAY/PAUSE button, the TV will restore playing.
General
Programming generally considered acceptable for
children 8 years and over to watch on their own.
Programming may not be suitable for
children under the age of 13.
Programming is not suitable for
children under the age of 16.
Stop playing: During playing, you can use STOP button to stop playing. If
you press STOP once, the DVD will be stopped briefly. Press STOP again, it
will stop completely and the disk in DVD module no longer wheels.
Eject the disk: You can press EJECT button to eject the disk from DVD
module. And press EJECT again, the DVD will load the disk renewedly.
*This function is enabled only when DVD mode is on.
Programming restricted to adults.
VHF : 2~13 UHF : 14~69
CATV : 1~135
Storage Temperature is
-20℃ ~ +60℃ -4℉ ~ +140℉
Operating Temperature is
0℃ ~ +50℃ +32℉ ~ +122℉
Storage Humidity : Less than 85%RH
(No condensation)
Operation Humidity : Less than 80%RH
(No condensation)
AC 100-120V, 60Hz
Cable/Antenna × 1
AV × 1
Component × 1
HDMI × 2
AV × 1
Headphone × 1, Digital Audio Out × 1
1366 × 768
480i, 480p, 720p, 1080i
28.9”W × 18.5”H × 7.3”D
28.9”W × 17.4”H × 3.2”D
13.7LBS(6.2KGS)
12.8LBS(5.8KGS)
less than 42W
Notice: Specifications and cabinet design are subject to change without
notice.
Limited Warranty for USA
Coverage - Labor
For a period of 12 months from date of purchase of your RCA
product, we will pay an authorized RCA service center the labor
charge to repair any defects in materials or workmanship in your
television.If your television is unrepairable we will provide you with a
refurbished unit of the same or better model.
Coverage - Parts
For a period of 12 months from date of purchase of your RCA
product, we will pay an authorized RCA service center for the
new,or at our option, refurbished replacement parts needed to
repair any defects in material or workmanship in your television. If
your television is unrepairable we will provide you with a refurbished
unit of the same or better model.
Coverage - LED LCD Panel
For a period of 12 months from date of purchase of your RCA
Garantia limitada para EE.UU
The service representative will review your options for service.
As a convenience we offer three ways to obtain warranty service.
o mano de obra en el televisor.
Your limited warranty does not cover the following items:
-Un-installation, installation and adjustment of customer controls and
operating instruction.
-Batteries and customer replacement fuses
-Damage due to misuse, abuse, negligence or neglect including but, not
limited to, damage resulting from exposure to moisture, humidity or salt.
-Inability to receive a signal due to problems not caused by the product.
-Damage to the product due to images burnt into the screen.
-Product purchased or serviced outside of Country of Original
Purchase.
-i.e. Purchased USA can not be serviced in Mexico/Purchased in
Mexico can not be serviced in USA.
-Product modified or incorporated into other products.
-Damage due to acts of nature, including but not limited to,lightning
damage or flooding.
-Service calls which do not involve any defect in materials or
workmanship.
Commercial Use Excluded
This limited warranty only applies to products used for personal use
and does not cover any product used for institutional, commercial or
rental purposes.
LIMITATION OF WARRANTY
THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE
WARRANTY APPLICABLE TO THIS PRODUCT. ON CORP US, INC.,
THE MANUFACTURER OF THIS PRODUCT, DISCLAIMS ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE). NO VERBAL OR WRITTEN INFORMATION
GIVEN BY ON CORP US, INC., ITS AGENTS, INDEPENDENT
CONTRACTORS, SALES REPRESENTATIVES, EMPLOYEES, RETAIL
DEALERS, WHOLE SALE DISTRIBUTORS OR ANY OTHER THIRD
PARTY SHALL CREATE A GUARANTY OR INCREASE. EXPAND OR
MODIFY THE SCOPE OF THIS LIMITED WARRANTY
.
THIS LIMITED WARRANTY PROVIDES THE SOLE AND EXCLUSIVE
REMEDY FOR THE CONSUMER OF REPAIR OR REPLACEMENTOF
THE PRODUCT. ON CORP US, INC. SHALL NOT BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OF THEP RODUCT OR ARISING OUT OF A BREACH
EXPRESSED OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS LIMITED WARRANTY AND THE DISCLAIMERS CONTAINED
HEREIN ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE IS LIMITED TO APPLICABLE LIMITED
materiales
Si su televisor es irreparable que le proporcionara una unidad
reacondicionada del mismo modelo o superior.
Cobertura / Recambios
Durante un periodo de 12 meses desde la fecha de compra de su
producto RCA, pagaremos a un centro autorizado de servicio de RCA
para un reemplazar ya sea con partes nuevas o reacondicionadas, o a
nuestra opcion, para reparar cualquier defecto del material o mano de
Items Not Covered By Limited Warranty
obra en el televisor.
Si su televisor es irreparable que le proporcionara una unidad
reacondicionada del mismo modelo o superior.
Panel de Cobertura-LED LCD
Durante un periodo de 12 meses desde la fecha de compra de su
producto RCA, pagaremos un centro autorizado de servicio de RCA
para un reemplazar la pantalla LED LCD, ya sea con pantalla nueva o
reacondicionada, o a nuestra opcion, para reparar cualquier defecto del
material o mano de obra en la pantalla de su televisor. Si su televisor
es irreparable que le proporcionara una unidad reacondicionada del
1415
A. General setup page
There exist three sub-menus in DVD setup menu, the first one is General
Setup. Press SETUP button on remote control to display General Setup
Page. Press up/down arrow to select the item you want to adjust and press
right arrow or OK button to activate it. After activating, use up/down arrow
to set item value. When you are satisfied with the adjustment, press left arrow
to return to the upper level of general setup menu. Press left arrow repeatedly,
you can exit the DVD setup menu. To exit setup menu directly, press
DVD/BD SETUP.
TV Display
Set the TV display shape.
OSD Lang
Set the DVD OSD language as English, French or Spanish.
Last Memory
Set it on to memorize the last stop point. During playing the DVD, if you
change to another mode and then come back to DVD mode, it can play
automatically from the last stop point.
Note: We suggest you turn off the last memory function unless you really
need it. To turn on this function may influence the lifetime of flash memory of
DVD module
B. Speaker setup page
Press DVD/BD SETUP button on remote control to display General Setup Page.
Press left/right arrow to choose Speaker Setup Page. The operating
method is similar with the General Setup Page.
Downmix
This option is preset as Stereo. That means the DVD player will output a
two-channel audio signal (L/R) to TV front speakers (left/right).
C. Preference page
Press DVD/BD SETUP button on remote control to display General Setup Page.
Press left/right arrow to choose Preference Page. The operating method is
similar with the General Setup Page.
Set the TV type as PAL, Auto or NTSC.
Note: American DVD standard is NTSC system, so we suggest you set the
TV Type as NTSC. In addition, you can also set it as PAL to watch some disks
with PAL system, or select Auto for convenience.
Audio
Set the DVD audio language.
Subtitle
Set the DVD subtitle language.
Parental
Set the parental control rating as KID SAF, G, PG, PG13, PGR, R, NC17 or
ADULT. To change this option, you need password, and the original one is
“0000”.
Default
Reset the DVD setup menu options as factory default.
- Productos comprados o prestar servicios fuera del pais
de compra original.
Ej: Comprado en Estados Unidos no puede prestar
servicios en Mexico/Comprado en Mexico no puede
prestar servicios en Estados Unidos.
- Productos modificados o incorporados a otros productos.
Cobertura-Trabajo
Durante un periodo de 12 meses desde la fecha de compra de su
producto RCA, pagaremos a un centro autorizado de servicio de RCA
el cargo de mano de obra para reparar cualquier defecto en
You may mail your product to the address provided by the service
representative, you may take your product to an authorized service
center, or you may request in home service (servicer will determine if
product is serviceable in home or must be taken back to local service
center for repair). Service representative will supply instructions for
preferred service. At the time of service proof of purchase such as
original receipt, will be required. Only 37” LCD size and above are
applicable for in-home-service.
5. DVD setup menu
- Danos en el producto debido a las imagenes de grabadas
en la pantalla.
RCA is a trademark of RCA Trademark Management
SAS and used under license by ON Corporation
For assistance (U.S.A) - if you purchased RCA product in
U.S.A, please call 1-888-977-6722.
Or visit www.rca.com
Repeat: There are two kinds of repeat, one is regular repeat and the other
is A-to-B repeat. For regular repeat, press REPEAT button to switch between
chapter repeat, title repeat and all repeat. For A-to-B repeat, press A-B
once to set the repeating origin and press it twice to set the repeating end.
DVD-setup menu: Press DVD/BD SETUP button, a specific setup menu
for DVD will display on screen. This menu is especially prepared for DVD
control.
que no son causadas por el producto.
WARRANTY PERIOD(S) SET FORTH ABOVE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS
AND YOU ALSO MAY HAVE OTHER RIGHTS THAT VARY
FROM STATE TO STATE.
product, we will pay an authorized RCA service center for the
new, or at our option, refurbished LED LCD panel needed to repair
any defects in material or workmanship in your television. If your
television is unrepairable we will provide you with a refurbished unit
of the same or better model.
How to Obtain Service
Audio language selection: Press AUDIO TRACK, you can switch the
available audio language in DVD disk.
Disc Menu
Set the DVD disk menu language.
4. DVD basic operations
Detail
Title menu: Press TOP MENU, you can reset the disk to the title menu.
It equals to ejecting and loading the disk again.
Zoom in: Press ZOOM, you can zoom in the screen for 2 times, 3 times
or 4 times from centre. This function provide a better view of the content
locate near screen centre.
Subtitle selection: Press SUBTITLE, you can switch the available subtitles
in DVD disk.
TV Type
Keypad on DVD module
Change the PIN of parental menu.
5. Before attaching the base to wall, ensure the holes for anchors
are in keeping with the installing rules. Otherwise there may exist
some potential problems.
MOVIE
All Children
18ans+
Change PIN
MUSIC
Remote
Age-Based Ratings
TV-Y
French Rating
Press OK to enter closed caption sub-menu, the detail as follow.
PHOTO
MENU
• When the Parental Control Menu is accessed from the Main Menu,
you need to enter password to unlock the menu function. Please
enter your four-digit password with numeric keys 0~9. Note: The
original password is “0000”.
• After unlocking, the items in parental control menu can be used.
Use arrow up/down to highlight the function you need and press
OK or right arrow to use V-chip, Change Password, Keypad Lock
and Source Lock, Clear Channel List sub-menu.
Menu Transparency
Screw
M6 screws, length 10mm
Change Setting
Parental Control
Resolution
Unit Dimension (unit:mm)
Off
Change your 4-digit PIN
USB 2.0
Model
Execute
Remote
Menu Language
Sexually Explicit Dialogue
Rating
Rating
V-CHIP
Setup Menu
Content Themes
This option allows you to execute Clear Channel List function.
This function will reset the whole TV system to factory default (not
only reset OSD menu).
Canada V-Chip
Set the time how long to display OSD menu(5 Sec, 15 Sec, 30 Sec,
45 Sec, 60 Sec).
- “USB Media Play” menu will appear.
Clear Channel List
NC-17
OSD Display Duration
- Press “INPUT” and select “USB”.
1213
TV Rating
ARC
The Lock Menu enables you to lock program with special content,
panel key board and input source. Press MENU on the remote and
choose Lock Menu from the Main Menu. Press the down button to
proceed the Lock Menu. The menu image and explanation are
shown below.
Set your TV time manually (needs to turn off auto clock). press up/
down and left/right arrow to config the current time.
Keypad Lock
Similar with Movie Rating. After adjusting, press MENU to return
or press HOME to exit the menu.
Going backward or forward: You can press FR for fast review and FF
for fast forward. You can also press PREV to return to the previous chapter,
and press NEXT to skip to next chapter.
Function menu: Press DISC MENU, you will return to the selection menu
of current DVD function. For example, you are using “Audio Selection”,
and you choose “Continue playing”, then after selecting, you can press
DISC MENU to go back to “Audio Selection” menu while playing.
Clear Downloadable Data
Activate or downloadable rating data. if available.
Select this option to block or unblock the TV’s side panel buttons
so that they can’t be used.
PG-13
Lock Menu
Clock
Block all the unrated program.
Press OK to enter US V-Chip ratings menu, which contains two
sub-menus: TV rating and Movie Rating.
Press left/right arrow to select a time period (Off, 1 Min, 5 Min, 10
Min) for “No Signal Power Off”. The TV will shut off after that period
of time while no signal. We suggest you turn on this function when
Blue Back is turned on. It may hurt the LED LCD panel if blue
screen is on for too long.
Adopted in TV output of digital audio, can be connected to the
device supporting ARC, transmit the TV sound to the device.
Select auto clock on/off. Auto clock helps you synchronize your
TV time to standard time (from DTV signal).
Block Unrated Show
US V-Chip
No Signal Power Off
Time Zone
- Connect a USB storage device to the USB port in the back of the TV.
- The electronic protection circuit may have been activated because of
a power surge. Wait 30 seconds and then turn the TV on again.
If this happens frequently, the voltage in your house may be abnormal.
If the other electronic equipment in your home can’t work normally,
consult a qualified service personnel.
The stereo sound performance is bad.
The seven-band graphic equalizer allows you to adjust the audio
frequency settings. You can select one of the equalizer presets
(Off, Pop, Rock, Jazz) or create your own personal preset (User).
Press the left or right arrow to select the frequency (100Hz, 250Hz
500Hz, 1KHz, 2KHz, 4KHz, 10KHz). you want to adjust. Use the
up or down arrow to adjust.
Connecting a USB storage device
The TV turns off unexpectedly.
Can’t select a certain channel.
- The channel may be blocked or not approved in the PARENTAL
control Menu.
- The channel may be skipped in channel list in CHANNEL Menu.
Check the blocking and skipping status of channel.
Equalizer Settings
With USB Media Play, you can enjoy music and photo files stored
in a USB storage device on your RCA TV.
The buttons on the side panel don’t work.
- The side panel may be locked (disabled). Use the remote control to
turn on the TV.
- Select the Keypad Lock function in the PARENTAL control Menu and
press OK to uncheck the locking status.
- Unplug the TV from the AC power for 10 minutes and then plug it back.
Turn the TV on and try again.
Set auto volume control on/off.
Note: These ratings are available only if the broadcaster is sending
rating information.
Input Block
This option allows you to lock or unlock the input source. The
source blocked can not be chosen from input list unless you input
the correct parental password. Use up/down arrow to select the
source, press OK to lock or unlock it.
V-Chip
Press OK to enter V-Chip sub-menu, the detail as follow:
mismo modelo o superior.Como Obtener Servicio
Para asistencia en Estados Unidos (E.U.A) si compro un aparato RCA
en E.U.A. favor dellamar al: 1-888-977-6722
o visite: www.rca.com
El representante de Servicio revisara sus opciones para el servicio.
Para su comodidad le ofrecemos tres formas de obtener servicio de
garantia.
Usted puede enviar su producto a la direccion proporcionada por
el representante de servicio, usted puede llevar su producto a un
centro de servicio autorizado, o puede solicitar en el servicio a
domicilio (administrador determinara si el producto se encuentre en
funcionamiento en casa o debe ser llevado de vuelta a servicio local
tecnico para su reparacion).
El representante del Servicio le proporcionara las instrucciones para el
servicio preferido.
Se requiere del comprobante de compra original.
- Danos debidos a fenomenos de la naturaleza, incluyendo
pero no limitado a, danos por rayos o inundaciones.
- Las llamadas de servicio que no impliquen cualquier
defecto en materiales o mano de obra.
Uso Comercial Exclusion
Esta garantia limitada solo se aplica a los productos utilizados
para uso personal o, y no cubre todos los productos utilizados
con fines institucionales, comerciales o de alquiler.
LIMITACION DE GARANTIA
ESTA GARANTIA LIMITADA ES EL UNICO Y EXCLUSIVO
DE GARANTIA APLICABLE A ESTE PRODUCTO. EN
CORP EE.UU., Inc., el fabricante de este producto, rechaza
cualquier otra garantia, expresada o implicada (INCLUYENDO
TODAS LAS GARANTIAS IMPLICITAS DE COMERCIAL
IZACION O IDONEIDAD PARA UN PROPOSITO
PARTICULAR). NO informacion verbal o escrita por parte
CORP DE EE.UU., Inc., sus agentes, contratistas
independientes, representantes de ventas, empleados,
comerciantes minoristas, mayoristas o cualquier otro tercero
DEBERAN crear una garantia ni aumentar. Ampliar o
modificar el alcance de esta garantia limitada.
Esta GARANTIA LIMITADA DEL UNICO Y EXCLUSIVO REMEDIO
PARA EL CONSUMIDOR DE REPARACION O REEMPLAZO
DEL PRODUCTO. EN CORP EE.UU., Inc. no sera
responsable por danos especiales, incidentales o
consecuentes resultantes DEL USO DEL PRODUCTO O
DERIVADOS DE UNA VIOLACION garantia expresa o
implicita de este producto.
ESTA GARANTIA LIMITADA Y RESPONSABILIDADES contenida en el
se rige por las Leyes del Estado de Indiana. SALVOPROHIBIDO POR
LA LEY APLICABLE, CUALQUIER GARANTIA IMPLICITA DE
COMERCIALIZACION O IDONEIDAD PARA UN PROPOSITO
PARTICULAR ESTARA LIMITADA A LIMITADA periodo de garantia (S)
mencionado anteriormente. Esta garantia le otorga derechos legales
especificos y USTED TAMBIEN PUEDE TENER OTROS DERECHOS,
QUE PUEDEN VARIAR DE ESTADO.
Solo se les dara servicio a Domicilio a Televisores de 37 " pulgadas de
tamano y mas grandes.
Elementos no cubiertos por la garantia limitada Su
garantia limitada no cubre los siguientes temas:
- Un-instalacion, montaje y ajuste de controles del cliente
e instrucciones de funcionamiento.
- Las pilas y los fusibles de repuesto al cliente.
- Danos por uso indebido, abuso, negligencia o descuido
incluyendo pero no limitado a, los danos derivados
de la exposicion a la humedad, la humedad o la sal.
- Incapacidad para recibir la senal debido a los problemas
RCA es una marca registrada de SAS bajo licencia de
ON Corporation
ON Corp US, Inc.
10920 Via Frontera, Ste 540
San Diego, CA 92127, U.S.A.
2014 ON Corporation
RCA is a trademark of RCA Trademark Management
SAS used under license to ON Corporation.
RCA es una marcade RCA Trademark Management
SAS usada bajo licencia de ON Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising