5-Button Electronic Lock Instructions For Model PB3

5-Button Electronic Lock Instructions For Model PB3
5-Button Electronic Lock Instructions
For Model PB3
AMERICAN SECURITY PRODUCTS COMPANY
11925 Pacific Ave Fontana, CA 92337
951-685-9680
Visit us on the web at: www.amsecusa.com
Part #4305310-v1
Revised 09/12
Each AMSEC safe is professionally hand-crafted with quality materials and is equipped with a
precision-quality, high-security combination lock. To become familiar with the lock, operate the
lock (as outlined below) several times before closing the door and locking the safe.
Operating Instructions – AMSEC 5-Button Electronic Lock Model PB3
Quick Reference
To Open the Lock on the factory code:
Press 1-2-3-4-5 and then turn knob clockwise about 90 degrees.
To Set the Primary Code:
Lock the safe OPEN. Press the change button once; then enter 5 keystrokes for the new
primary code. Test the new code.
To Set the Backup Code:
Lock the safe OPEN. Press the change button twice; then enter 8 keystrokes for the new
backup code. Test the new code.
To Turn the Sound of the Beeper Off:
Lock the safe OPEN. Press the change button three times; then press button number 1. To
return the beeper to On, Repeat the same steps.
NOTICE:
The PB3 Digital Lock has Two (2) operating combinations, a Primary Code for everyday use,
and a Backup Code for you to use in the case you forget or make an error changing your
Primary Code. ALL LOCKS HAVE THE SAME BACKUP CODE. To insure security, you MUST
set a unique Backup Code and store it in a secure location (not inside the safe).
Detailed Instructions
The AMSEC PB3 lock is an electronic safe lock. This lock provides quick access to a security
container with high reliability and little effort. For maximum security, it is recommended that the
PB3 be anchored to a permanent surface.
Operating Information
¾¾There are two programmable “codes” in the lock; a “Primary” code that requires five (5)
keystrokes, and a “Backup” code that requires eight (8) keystrokes.
¾¾A “Keystroke” can be one button, or two buttons pushed simultaneously.
¾¾The Buttons are numbered 1 thru 5 starting at the left.
¾¾The “Primary” code is for everyday use. The “Backup” code is provided so the user can have a
means to access the safe in the event they forget their Primary Code. The Backup Code should
be set to some unique combination, and kept in a secure location (not inside the safe).
¾¾The “Factory” Primary code is 1 – 2 – 3 – 4 – 5.
¾¾The Backup Code is not kept at the factory. Every PB3 lock comes with the same Backup
Code. Please set you own unique Backup Code to insure security.
¾¾The Factory Default Backup Code is 5 – 4 – 3 – 2 – 1 – 5 – 4 - 3. The consumer should change
this code to provide optimum security.
¾¾The PB3 lock has a Penalty Lockout feature to prevent tampering (code testing).
• This feature will cause the lock to stop accepting input for five (5) minutes after four (4)
incorrect opening attempts.
• While in Penalty Lockout, the lock will respond to any keystroke with eight (8) rapid
flashes of the red LED lamp, along with beeps.
¾¾While in Penalty Lockout, the LED lamp will flash once every five (5) seconds and beep.
¾¾ When a correct code has been entered, Primary or Backup, the Red LED Lamp will light for
three (3) seconds, indicating the lock can be opened.
• To open the lock, turn the knob Clockwise 90 degrees.
¾¾The PB3 lock uses four (4) standard AA Alkaline Batteries.
• We recommend Duracell® or Eveready Energizer® batteries for best performance.
• The PB3 lock should open approximately 5000 times with fresh, good quality batteries,
depending on installed options and user habits.
¾¾The PB3 lock provides a backup power port to prevent lockout if the internal battery is
allowed to go dead.
¾¾Loss of power will not erase codes. The PB3 lock uses “non-volatile” memory.
¾¾On the side of the lock body, you will find a small white button used to program codes and
features.
• This lock is not waterproof, and is not intended for outdoor use. Exposure to
extreme conditions or excess moisture may cause a malfunction, and will void the
Manufacturers Warrantee.
¾¾The PB3 Lock has a power-saver feature that puts the lock in sleep mode after 30 seconds if
it has been left unlocked.
Programming
The PB3 lock is programmable, so the user can change codes and beeper off feature.
To Set the Primary Code:
¾¾Lock the safe OPEN.
¾¾Press the change button once.
¾¾Enter five (5) keystrokes for the new primary code.
¾¾Test the new code.
To Set the Backup Code:
¾¾Lock the safe OPEN.
¾¾Press the change button twice.
¾¾Enter eight (8) keystrokes for the new backup code.
¾¾Test the new code.
To Turn the Sound of the Beeper Off:
¾¾ Lock the safe OPEN. Press the change button three times; then press button number 1. To
return the beeper to On, Repeat the same steps.
PURCHASE RECORD
Model #:___________________________________________________________
Serial #:___________________________________________________________
Date of Purchase:___________________________________________________
Purchased From:____________________________________________________
Company:__________________________________________________________
Address:___________________________________________________________
City__________________________ State_________ Zip Code______________
Telephone #:_______________________________________________________
Email Address:_____________________________________________________
Website:___________________________________________________________
RECORD YOUR COMBINATION HERE (STORE IN A SAFE PLACE)
Primary Code: ________________________ ______
One TwoThreeFour Five
Backup Code: ________________________ ______
One TwoThreeFour Five
______ ____________
Six SevenEight
If you would like us to send AMSEC Safe information to a friend or if you have
any questions concerning our complete line of security products, please send
your request to:
AMERICAN SECURITY PRODUCTS COMPANY
11925 Pacific Ave Fontana, CA 92337
951-685-9680
Visit us on the web at: www.amsecusa.com
Part #4305310-v1
Revised 09/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising