Release Notes for DrayTek VigorPro 5510 (UK/Ireland)

Release Notes for DrayTek VigorPro 5510 (UK/Ireland)
Release Notes for DrayTek VigorPro 5510 (UK/Ireland)
Firmware Version
Release Type
Build Date
Release Date
Revision
Applicable Models
Locale
3.3.6.4 (Formal Release)
Critical – Upgrade recommended immediately
3rd February 2017
21st February 2017
62181
VigorPro 5510
UK & Ireland Only
New Features
(None)
Improvements
1. Security improvements including one or more considered critical.
Known Issues
(None)
Firmware File Types
The ZIP file contains the firmware with two different file extensions, .ALL and .RST. The firmware is
identical but the RST file contains factory default settings. If you install the ALL file, your router will
retain all existing settings. If you use the RST file, all settings will be wiped from your router.
Upgrade Instructions
It is recommended that you take a configuration backup
prior to upgrading the firmware. This can be done from
the router's system maintenance menu.
To upgrade firmware, select 'firmware upgrade' from
the router's system maintenance menu and select the
correct file. Ensure that you select the ALL file unless you
want to wipe out your router’s settings back to factory
default.
Manual Upgrade
If you cannot access the router's menu, you can put the router into 'TFTP' mode by holding the
RESET whilst turning the unit on and then use the Firmware Utility. That will enable TFTP mode.
TFTP mode is indicated by all LEDs flashing. This mode will also be automatically enabled by the
router if there is a firmware/settings abnormality. Upgrading from the web interface is easier and
recommended – this manual mode is only needed if the web interface is inaccessible.
Firmware Version
Release Date
Build Date
Applicable Models
Locale
New Features
(None)
Improvement
1.
Update OpenSSL for CVE-2014-0224
3.3.6.3
25th June 2014
5th June 2014
VigorPro 5510 Only
UK/Ireland Only
Firmware Version
Release Date
Build Date
Applicable Models
Locale
3.3.6.2
18th December 2012
5th Nov 2012
VigorPro 5510 Only
UK/Ireland Only
New Features
(None)
Improvement
1. Resolved an issue with FTP firmware upgrade.
2. Anti-Spam query timout value decreased.
Firmware Version
Build Date
Applicable Models
Locale
3.3.6.1
5th Nov 2012
VigorPro 5510 Only
UK/Ireland Only
New Features
(None)
Improvement
1. The firewall rule didn't apply work when the filter action is set with “Pass If No Further
Match”.
2. License may not activate if a proxy is installed between the router and the server.
3. User management can not be displayed on login web page normally in Safari browser.
4. Web Content Filter's cache maintenance improved
5. Corrected csm wcf server telnet command
6. Reduce the opportunity for Anti-Spam query timeout
7. When the cache for Web Content Filter is changed into (None), the cache will clean all the
data in it.
8. Improved: The web authentication for user management allows you to choose HTTPS or
HTTP (configured in User management>>General Setup)
Firmware Version
Release Date
Build Date
Applicable Models
Locale
3.3.4
4th Feb 2010
25th Nov 2009
VigorPro 5510 Only
UK/Ireland Only
New Features
1.
2.
3.
4.
5.
6.
7.
8.
New Web UI style
Support up to 50 SSL VPN tunnels
Support TR-069
Support LDAP for authentication VPN users
Support WCF (DrayTek Globalview)
Support 3G modem, D-Llink DWM156
Support AES encryption for phase I
Add the type of Torrent in Restrict Web Feature. Forbid customers downloading BT file.
Improvement
1. Resolved issue preventing signature upgrade via WAN2 if the WAN1 connection fails or
connects to Intranet.
2. Improved reliability of signature download process.
Known Issues
(None)
Modification
1. SSTP Authentication of SSL VPN is terminated.
2. Surfcontrol WCF support removed and replaced with DrayTek Globalview
Firmware Version
Release Date
Build Date
Applicable Models
Locale
3.3.3.2
22nd Oct 2009
4th Sept 2009
VigorPro 5510 Only
UK/Ireland Only
NOTE: 3G modems listed here indicate drivers have been added but does not confirm compatibility
with UK Operators. For the official list of supported models please see the Vigor5510 specification
page
New Features
1. Support CICP interrupt mode.
2. Support Application Enforcement, changed from IM/P2P.
3. Support trial version (one month) for DT-KL AV/AI service.
Improvement
1. Improve the problem of CVE-2008-1447 DNS cache spoof.
2. Improve the AI/AV performance.
3. Improve the CPA performance.
Known Issue
1. CPA service will not be supported any more and this might cause web surfing to be slowed.
If slow web surfed is observed, please use auto-reboot as a temporary work-around.
Modifications
1. Fix the problem of NMAP scanning DDoS.
Firmware Version
Release Date
Applicable Models
Locale
3.3.2
29th May 2009
VigorPro 5510 Only
UK/Ireland Only
New Features
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Support auto-reboot function.
Support the independent Black/White list in Web Content Filter.
Support web firewall log.
Support Anti-Spam gray list.
Support Anti-Spam timeout reason in MIME header.
The format is: LAN MAC address + error number
for example: 00507fXXXXXX0004 = 00507fXXXXXX + 0004
Error number:
a. 0000 = unknown
b. 0001 = quick pass while we meet timeout issue
c. 0002 = can not connect to server
d. 0003 = fail to send data
e. 0004 = reply timeout
Support AI/AV detection counter.
Support alert tool for AI/AV and LAN Security Monitor – users can control the message by
using alert tool.
Support Bandwidth limited for 2nd subnet.
Support VPN load balance function.
Support HTTP proxy (port 8080 and 3128) for Anti-Virus function.
Support forced DrayTek web log in.
The sentence "Powered by DrayTek" will be shown in block pages of Web Content Filter and
Sessions Limitation. We can turn off this function in Firewall>>Firewall Rule
>>Advance>>Advertisement.
Support CPU/Memory information displayed on System Status.
Support Option Icon 7.2 / Icon 225 modem (HSO driver).
Support UDP Traceroute. The router will deliver the forwarded information from PC forward
to outside, from local host to outside.
Support mail alert test function.
Support multi-keyword item. Each object keyword can be split to three keywords by space.
Support service activation wizard. It is not necessary for the users to register the account
from VigorPro web site. Users can use the services after finishing the wizard. However, if the
user wants to do other actions like transferring or reinstalling service license, he/she must
register an account.
Support dynamic message in Web Content Filter. Now we support:
%SIP%, source IP Address
%DIP%, destination IP Address, sometime it will be proxy address.
%URL%, the target URL
%CL%, category of the web page.
%RNAME%, router name
20. Support level 2 Cache of Web Content Filter.
21. Default setting is ON. Users can turn it off by accessing Firewall>General Setup>Strict
Security Checking>Web-Filter.
22. Support VigorPro cooperation mechanism. When users login the web page after VigorPro
router meets some issue, the system will ask users to send information back to be analyzed.
Improvement
23. Improved the performance of Anti-Spam to prevent timeout occurances
Known Issue
24. CPA service will not be supported any more. It might cause trouble in web surfing slowly.
Please use auto-reboot as a temporary work-around.
Modifications
1. Change Data Flow Monitor into LAN Security Monitor.
2. Fix the problem where mail can not be received while the AV and AS service are turned on
together.
3. Fix the problem that anti-spam black/white list cannot be used when more than 8 items are
set.
4. Fix the problem that keyword objects cannot be set more than 8 items.
5. Fix the problem that WAN2 will be disconnected while transparent mode is turned on.
6. Fix the problem that system will reboot while 3G is used and AV service is turned on.
7. Fix the problem that QoS can not control traffic flow for SMTP traffic.
8. Fix the problem that prevented outgoing mails in some situation.
9. Fix the problem in NAT loopback environment that can cause interference with mails
10. Fix the problem that IP unnumbered cannot work in NAT loopback environment. Now all
interfaces (normal and alias) can be IP unnumbered.
11. Fix the problem that CPA web content filter could slow network operation.
12. Fix the problem that could cause a DNS cache buffer overwrite.
13. Fix the problem that caused a DNS packet parser error in malware packet.
14. Fix the problem of maintenance while NAT protocol equals to “0”.
15. Fix the problem when items of IP bind MAC are over 42, a reboot could occur
Firmware Version
Release Date
Applicable Models
Locale
3.3.1 (Release)
5th August 2008
VigorPro 5510 Only
UK/Ireland Only
New Features
1.
2.
3.
4.
5.
SSL VPN
WAN2 alias
Mail alert test function
UDP trace route
Support for DrayTek Smart Monitor (software due Q4/08)
Improvements
1. Anti-Spam
a. Improve the mail receiving performance in VPN environments
b. Improve the anti-spam function in transparent mode.
c. Increase email queue size
d. Reduce likelyhood of timeouts from AS server
1. Anti-Virus
a. Enlarge the Anti-Virus sessions to support 12000 sessions
b. Support queue packets in router to improve the out of sequence side
2. Increase the 'worst case' performance, e.g. with all facilities enabled DSL, VPN etc.
3. Fixed some 'banking' websites can not be accessed by VigorPro.
4. Correct the sessions issue between both Vigorpro devices.
First Firmware Release
[END OF FILE]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising