FESTINA-IFM6SA2

FESTINA-IFM6SA2
 AD
FESTINA \1FMbsRhe
CHRONOGRAPH caLEnDAR )
MANUAL DE INSTRUCCIONES © INSTRUCTION MANUAL
MANUEL D'INSTRUCTIONS © BETRIEBSANLEITUNG * MANUALE DI FUNZIONAMENTO
KR
FESTINA
Displays and Buttons
Setting the time
Setting the Date
Using the Chronograph
Chronograph reset
14
15
15
16
18
13
ENGLISH
IFMBSHZ
DISPLAYS ANO BUTTONS
FUNCTION: CHRONOGRAPH TIMING UP TO 2 HOURS 59 MINUTES 59 SECONDS
(CENTER SECOND HAND, 1/20 SEC SMALL HAND, MINUTE HAND)
Chronograph second hand
Minute hand
Button A
Chronograph
1/20 second hand
Chronograph
hour hand
—_——
— |
——
Hour hand
Chronograph
minute hand
Second hand
Fecha
IFMBSHZ
SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
SETTING THE OATE
Pull the crown out to the 1st Click Position.
bh
e
. Turn the crown clockwise to set the date.
*If the date is set between the hours of around 9:00PM and 1:00AM, the
date may not change on the following day.
N
Ww
. After the date has been set, push the crown back to the Normal position.
14
ENGLISH
IFMBSHZ
This chronograph is able to measure and display time in 1/20 second united up
to maximum of 2 hours 59 minutes 59 seconds. The chronograph 1/20 second
hand keeps continuously for 30 seconds after starting, and then stops at Zero A A
osition. — > Time — >
Р | Reset | | Measurement || Stop |
VB ив
MBSHZ
USING THE CHRONOGRAPH
ENGLISH
[Measuring time with the stopwatch]
1. Press button “A” to start the chronograph.
2. The chronograph can be started and stopped each time button “A” is
pressed.
3. Press button “B" to reset the chronograph hour, minute, second and 1/20
second hands return to their Zero position.
16 17
IFMBSHZ
CHRONOGRAPH RESET [INCL AFTER REPLACING BATTERY]
This procedure should be performed when the chronograph second hand does not
return to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button “A” once to set the chronograph second hand to the Zero
position.
3. Press the button “B" once to set the chronograph 1/20 second hand to the Zero
position.
* The chronograph hands can be advanced rapidly by continuously pressing
button “A” or “B”.
4. 4.0nce the hands are set at Zero position, reset the time and return the crown to
its normal position.
*The Zero position of the chronograph 1/20 second hand is possible to set
optional position (360° 60step).
IFMBSHZ
By virtue of the regulations pursuant to the handling of waste products
deriving from electronic and electrical equipment, end of lifecycle watch
making products must be selectively collected for processing. You may
therefore dispose of your quartz watch making products at any of our retail outlets
or any other authorized collection point. The selective collection, processing, rating
and recycling of these products helps contribute to safeguarding the environment and
protecting our health.
18
19
ENGLISH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising