SNC-CH220
(Project No.)
(Date)
(Project Name)
(Project Location)
ARCHITECT & ENGINEER SPECIFICATIONS
SECTION 28 23 29
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
SNC-CH220
Full HD, Day/Night, Fixed-Type, CS-mount Network Camera
with Exmor Technology
(Software version 1.82.01 or later)
PART 2 – PRODUCTS
2.01 NETWORK CAMERA SPECIFICATIONS
Table of Contents
A. MAIN FEATURES........................................................................................ 2
B. CAMERA ..................................................................................................... 4
C. CAMERA FEATURES ................................................................................. 6
D. VIDEO ......................................................................................................... 7
E. INTELLIGENT VIDEO ANALYTICS........................................................... 13
F. AUDIO ....................................................................................................... 14
G. SYSTEM REQUIREMENTS & NETWORK ............................................... 15
H. INETERFACES.......................................................................................... 18
I. GENERAL SPECIFICATIONS ................................................................... 19
J. REGULATORY SPECIFICATIONS ........................................................... 20
K. SUPPLIED ACCESSORIES ...................................................................... 21
L. OPTIONAL ACCESSORIES ...................................................................... 22
M. DIMENSIONS ............................................................................................ 23
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 1
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
A. MAIN FEATURES:
1. Full HD, Day/Night, Fixed-Type, CS-mount Network Camera
2. 1080p FHD picture quality (1920 x 1440 pixels maximum
resolution), supporting H.264 at 30 fps (IP)
3. 3 compression formats (H.264, MPEG-4, JPEG) and dual
streaming capability
4. Dynamic range more than 60 dB
5. Minimum scene illumination of 0.70 lx in Color mode and 0.45 lx in
Black and White (B/W) mode (50 IRE [IP], F 1.3, AGC 42 dB).
6. Exmor CMOS:
This sensor shall realize high quality and low noise images.
Due to its high-speed readout characteristics, this sensor is used to
capture multiple HD resolution images at a very high speed.
7. Intelligent Motion Detection (IMD):
This feature shall be able to minimize the number of false alarms
by eliminating environmental noise such as trees moving, ripples in
water, reflection from wet roads and gain noise to name but a few.
This is very different to other manufacturers that typically compare
just two frames together. This camera compares 15 frames
together, which ensures that only ambiguous objects moving can
trigger a real alarm.
As a result, this enables end users to focus on real events, not
suffer from loss of attention and quickly locate video that has been
recorded upon alarm activations.
8. Distributed Enhanced Processing Architecture (DEPA):
This technology is an edge based intelligent video analytics. It
introduced the ability to work with five different filters enabling the
detection of a moving object: appearing; disappearing; staying in
an area longer than a pre-defined time; the number of moving
objects and the direction an object is moving across a virtual trip
wire.
The camera captures the moving images, and analyze the video to
determine the size and location of the moving object, and
packages this information up as a metadata, and then streams the
metadata over the network. The recorder receives the metadata
and applies one of five filters to determine when an alarm condition
is met.
9. The camera shall be compliant with the Open Network Video
Interface Forum Profile S (ONVIF Profile S) conformance.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 2
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 3
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
B. CAMERA:
1. The camera shall utilize a 1/2.8-type, Exmor CMOS sensor.
2. The number of effective pixels shall be approx. 3.27 Megapixels.
3. The analog MONITOR output of the camera shall be selectable
from either the NTSC or PAL standards.
4. Camera synchronization shall be Internal.
5. The camera shall require a minimum scene illumination at either
1920 x 1080 or 1920 x 1440 resolution of:
Color:
0.70 lx (50 IRE [IP], F 1.3, AGC 42 dB)
0.40 lx (30 IRE [IP], F 1.3, AGC 42 dB)
B/W:
0.45 lx (50 IRE [IP], F 1.3, AGC 42 dB)
0.25 lx (30 IRE [IP], F 1.3, AGC 42 dB)
6. The dynamic range shall be more than 60 dB.
7. The camera shall have an AGC capability of up to 42 dB.
8. The camera shall have the following 7 gamma compensation
modes:
-Standard: Can be used for various scenes.
-Scene 1: Brings out dark areas without losing details in the bright
portions of the scene with high contrast.
-Scene 2: Similar to Scene 1 but more effective than Scene 1.
-Scene 3: Brightens up dark areas of a scene with high contrast.
-Scene 4: No gamma compensation (linear)
-Scene 5: Prevents overexposure when shooting objects are
extremely bright.
-Scene 6: Is used when a 1.8 gamma display system is used.
9. The electronic shutter speed shall be set from 1 to 1/10,000
second.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 4
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
10. The camera shall have a BLC (Backlight Compensation) capability.
11. White balance shall be ATW (approx. 2000 K to 10000 K), ATWPRO (approx. 3000 K to 5800 K), Fluorescent lamp, Mercury lamp,
Sodium Vapor lamp, Metal Halide lamp, White LED, One push WB,
or Manual.
12. The camera shall have a CS-mount 2.1X DC auto-iris type
varifocal lens as a standard equipment.
13. The camera shall also have 3X digital zoom capability.
14. The camera shall have the total zoom ratio of 6.3X with 2.1X
optical zoom and 3X digital zoom capabilities.
15. The camera shall have an Easy Focus function, which adjusts the
camera focus via the Easy Focus button on the rear of the camera
or remotely via the GUI.
16. The viewing angle shall be:
Horizontal: 101.2˚ to 47.0˚.
17. The focal length shall be 2.8 to 6.0 mm.
18. The aperture range for the lens (F number) shall be F 1.3 (Wide) to
F 1.9 (Tele).
19. The camera shall support up to 16 preset position tours for each of
the 2 image compression formats. Up to 5 tours shall be supported.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 5
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
C. CAMERA FEATURES:
1. The camera shall support an ON/OFF selectable NR (Noise
Reduction) capability.
2. The camera shall have privacy zone masking which blocks out
unwanted or prohibited area within the video image to protect
privacy.
Mask colors shall be Black, any of 6 shades of Gray, White, Green,
Yellow, Red, Cyan, Magenta, and Blue.
The camera shall be capable of masking up to 4 areas. Such
capability shall be via vendor supplied SNC toolbox utility software
or the browser-based setup menu.
3. The camera shall have a superimpose capability for the following
information:
- Camera ID of up to 20 alphanumeric characters or logo in gif
format
- Date/Time data with selectable formats such as year-month-day,
hour-minute-seconds; and day-month-year, hour-minutes-seconds
- Zoom or vari-focal ratio (optical and digital)
- Actual frame rate (fps) and bit rate (bps)
- Preset position name of up to 32 alphanumeric characters
- Event -- sensor IN, IMD, camera tampering detection
- Character string of up to 61 alphanumeric characters
Font size of the superimposed data shall be user configurable for
large, medium or small. Superimpose position shall be 4 corners,
top, bottom, or center of the screen for a total of 7 selectable
positions.
4. The camera web browser shall support the following languages:
English, Japanese, Simplified Chinese, Traditional Chinese,
Korean, Portuguese, French, Spanish, German, and Italian.
5. The camera shall have a Smartphone viewer, which can display
the camera image and operate Pan/Tilt/Zoom (PTZ) on the
smartphone.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 6
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
D. VIDEO:
1. The supported resolutions in 1920 x 1080 and 1920 x 1440 mode
are shown in the following:
When you set the different image size to Image 1 and Image 2, the
available combinations are as follows:
○: Possible set
△: Possible set if the resolution is the same as image1
×: Impossible set
When SolidPTZ is set to On, selectable image sizes are as follows.
○: Configurable.
△: Configurable when SolidPTZ of Image 2 is set to Off.
×: Not configurable
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 7
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
2. The camera shall support the following compression formats:
JPEG, MPEG-4 and H.264.
There are 2 ‘resolution’ modes to choose from when installing a
camera: 1920 x 1080 (Full HD) (default) or 1920 x 1440.
When 1920 x 1080 mode (aspect ratio: 16:9) is selected, and
resolutions in 4:3 aspect ratio are chosen, the displayed image will
be stretched vertically. When 1920 x 1440 mode (aspect ratio: 4:3)
is selected, and resolutions in 16:9 aspect ratio are chosen, the
displayed image will be stretched horizontally.)
3. The camera is compliant with the SMPTE 274M in terms of number
of pixels (1920 x 1080) and 16:9 format.
4. The maximum frame rate capability of the camera over LAN at
1920 x 1080 resolution shall be 30 frames per second in H.264, 20
frames per second in MPEG-4 and 16 frames per second in JPEG.
The maximum frame rate at 1920 x 1440 resolution shall be 20
frames per second in H.264, 16 frames per second in MPEG-4 and
12 frames per second in JPEG.
5. The camera shall be capable of image cropping in all compression
formats, such that only the area of interest is transmitted, to reduce
bandwidth and file storage requirements.
6. The camera shall support electronic pan/tilt/zoom or e-PTZ, when
1920 x 1440 mode is selected. This function shall be supported in
both dual streams; image 1 and image 2.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 8
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
7. The camera shall support up to 8 preset e-PTZ positions for each
of the 2 compression formats.
8. The camera shall be capable of streaming 2 standard definition
(VGA) images at the same time during e-PTZ mode, where one of
the streams is a scaled down image, while the other is a cropped
VGA image. Both images shall be selectable from any of the 3
compression formats; H.264/MPEG4/JPEG.
9. The camera shall have an Adaptive Rate Control (ARC) function
when using MPEG-4 and H.264 compression.
This function when enabled, shall allow the camera to maintain the
frame rate at a reduced image quality when network congestion
occurs. Should network bandwidth become further restricted, the
frame rate shall then drop automatically to a suitable speed to
maintain image integrity.
10. The camera shall be capable of limiting the bandwidth from 64
kbps to 8 Mbps in MPEG-4 or H.264, and from 0.5 Mbps to an
unlimited bandwidth in JPEG.
11. JPEG compression levels shall be user selectable in 10 levels of
compression ratios, based on an image of 24 bits per picture
element (8 bits each for YUV).
12. Constant bit rate algorithm for JPEG data:
The camera shall be capable of equalizing JPEG data sizes to
have stable bandwidth utilization. Data size for each compression
level is as follows:
13. Actual frame rate in JPEG shall be shown in the following table:
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 9
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
14. The camera shall have the capability of simultaneously encoding
up to 2 of the following compression formats in any combination,
including multiple instances of the same compression format:
JPEG, MPEG-4, and/or H.264.
The maximum frame rates of each combination are shown in the
following tables:
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 10
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
15. The camera shall be capable of supporting up to 5 users
simultaneously over the network.
16. The camera shall have up to 6 user level settings.
The administrator shall have complete access/control of the
cameras. The other 5 levels of access can be set to limit user
privileges to functions such as viewing, changing image size, etc.
Access to functions shall be determined as shown in the following
table:
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 11
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 12
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
E. INTELLIGENT VIDEO ANALYTICS:
1. The camera shall incorporate a built-in unique Intelligent Motion
Detection (IMD) capability that supports Distributed Enhanced
Processing Architecture (DEPA) technology.
To minimize false triggers, this Intelligent Motion Detection shall
compare the current image with prior 15 frames within the camera.
This algorithm shall allow the camera to discriminate against some
environmental noise such as shaking leaves or Auto Gain Control
maximum rate noise.
2. The camera shall have a camera tampering detection function that
alerts the operator if the camera is tampered with. Tampering can
include spraying of the camera lens, covering it with a cloth, or
changing of the mounting direction.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 13
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
F. AUDIO:
None
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 14
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
G. SYSTEM REQUIREMENTS & NETWORK:
1. The supported operating systems shall be Microsoft Windows 8
Pro* 32 bit and 64 bit, Microsoft Windows 7 32 bit and 64 bit
(Ultimate/Professional), Microsoft Windows Vista 32 bit
(Ultimate/Business), Microsoft Windows XP 32 bit (Professional),
and Microsoft DirectX 9.0c or higher
*Software version 1.79 or later.
2. Minimum PC requirements shall be the Intel Core2 Duo Processor,
2.33 GHz or higher, with 2 GB RAM or more supporting 1600 x
1200 or higher resolution (2560 x 1600 resolution or higher is
recommended), 24-bit True Color display capability with Ethernet
100Base-TX.
3. The camera shall incorporate a built-in web server, such that the
standard web browser Microsoft Windows Internet Explorer
(version 6.0, 7.0, 8.0, 9.0 or 10.0 recommended) can be used to
access the camera without need for special viewer software.
4. The following web browsers can also be used to access the
camera with the ‘Plug-in Free’ viewer: Firefox version 3.5, Safari
version 4.0 and Google Chrome version 4.0. When using these
browsers, the video is displayed in JPEG format.
5. The ‘Plug-in Free’ viewer also supports the Flash plug-in and
ActiveX viewer, the latter allowing for MPEG-4 and H.264 video
streams.
6. The camera shall support ActiveX viewer which allows the camera
image to be viewed in Internet Explorer.
The ActiveX viewer allows for recording of video directly to the
PC’s hard drive.
7. The camera shall be capable of generating HTML code for the
video image, allowing for easy web page integration.
8. The camera shall support Windows Desktop Gadgets and shall
allow for the ActiveX viewer to be modified.
9. The camera shall support the following network protocols:
IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP
(client only), SSL, SMTP, DHCP, DNS, NTP, RTP/RTCP, RTSP
(IPv4 only), and SNMP (v1, v2c, v3).
Network security shall be via password (basic authentication) and
IP filtering.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 15
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
10. The camera shall have the capability to stream MPEG-4 and H.264
video in TCP protocol or MPEG-4 and H.264 in UDP
(unicast/multicast) protocol.
11. The camera shall be capable of deterring brute force attacks.
The camera shall recognize a brute force attack and refuse HTTP
requests from an attacker's IP address for a preconfigured number
of seconds. The camera shall determine that a brute force attack
occurred when a client authentication error occurs 5 consecutive
times.
12. The camera shall be capable of dynamic IP address change
notification. It shall accomplish this via an email to a specified
address or by HTTP when its IP address changes.
13. The camera shall support HTTPS client authentication.
14. The camera shall have an FTP client capability which allows the
following:
- Transferring a JPEG image to a pre-specified FTP server when
an alarm is triggered by either motion detection, camera tampering
detection or sensor input.
- Periodically capturing a JPEG image and transferring it to the
FTP server.
15. The camera shall have an email (SMTP) notification capability
which allows the following:
- Sending an email to pre-specified users when an alarm is
triggered by either motion detection, camera tampering detection
or sensor input. A JPEG image, which is linked with the alarm
trigger, can be attached to the email.
- Periodically capturing a JPEG image and sending it via email.
16. The camera shall support RTSP (IPv4) protocol based upon RFC
2326 and shall support the following options: DESCRIBE, SETUP,
PLAY, TEARDOWN, and GET_PARAMETER.
17. The camera shall support National Transportation Communications
for ITS (NTCIP) protocol.
18. The camera shall support QoS technology using Differentiated
Services Code Point (DSCP).
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 16
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
19. The SNC toolbox software includes the IP Setup (including group
camera management) program, Firmware Upgrade Tool, Privacy
Masking Tool, Custom Homepage Installer, and Group Camera
Setting Scheduler.
The SNC toolbox shall be supplied with the camera as a standard
accessory in the CD-ROM.
20. The camera shall support IP Filtering, whereby access to the
camera can be restricted to one or more groups of selected users.
Up to 10 different groups can be established by defining an IP
address range for each group.
21. The camera shall support IEEE 802.1X authentication, and shall:
- comply with the IEEE 802.1X standards,
- be capable of being integrated into an IEEE 802.1X network to
achieve high network security,
- support EAP-TLS mode to use a key pair from a Certificate
Authority (CA),
- support EAP-MD5 mode,
- support PEAP mode.
22. The camera shall have user configurable port settings.
23. Upon CGI command request, system log shall be recorded on a
built-in memory (non volatile memory).
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 17
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
H. INETERFACES:
1. The composite analog video output shall be 1.0 V peak-to-peak @
75 ohms.
2. The camera shall have a composite analog MONITOR output in
addition to streaming video via Ethernet.
The composite analog video output can be used for monitoring
while installing the camera to adjust the field of view and focus.
3. The composite analog video output shall be a phono jack type
connector.
4. The camera shall have an RJ-45 socket on the rear of the camera.
5. The network interface shall be via an 8-pin RJ-45 connector,
10Base-T/100Base-TX Ethernet.
Both IPv6 and IPv4 are supported.
6. The camera shall have a 4-pin I/O interface located on the rear of
the camera.
There shall be an alarm input port, and an alarm/relay output port.
The alarm input port shall be opto-isolated.
7. The camera shall support 1 optically isolated sensor inputs, and 1
relay outputs. They shall be accessible via a 4-pin push type
spring lock connector.
8. The camera shall provide sensor-in/relay-out ports for interfacing
with external equipment.
The sensor input shall be configurable for either ‘make contact’ or
‘break contact’ configuration.
9. A relay output shall be rated at AC 24 V/DC 24 V, 1 A or less.
10. IO assignment: I/O Port
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 18
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
I. GENERAL SPECIFICATIONS:
1. The camera input power shall be Power over Ethernet (PoE) (IEEE
802.3af compliant) and the power classification shall be Class 2.
2. Power consumption for the camera shall be 5.0 W maximum.
3. The camera operating temperature shall be within the following
range:
+14 ˚F to +122 ˚F (-10 ˚C to +50 ˚C)
Cold start temperature must be greater than +32 ˚F (0 ˚C).
4. The camera storage temperature shall be within the following
range:
-4 ˚F to +140 ˚F (-20 ˚C to +60 ˚C)
5. The camera operating humidity shall be within the range of 20 % to
80 % (non-condensing).
6. The camera storage humidity shall be within the range of 20 % to
95 % (non-condensing).
7. The camera dimensions (W x H x D) shall be approximately:
2 7/8 in. x 2 1/2 in. x 7 7/8 in. (72 mm x 63 mm x 197.3 mm) (with
lens and without projecting parts).
8. The camera shall weigh approximately 1 lb. 3 oz. (550 g) with
supplied lens.
9. The camera shall have a mounting screw hole (¼”, 20 UNC) on
both the top and bottom of the camera body for standard mounting.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 19
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
J. REGULATORY SPECIFICATIONS:
1. UL2044, IEC60950-1
2. FCC Class A Digital Device
3. IC Class A Digital Device
4. VCCI Class A
5. Emission: EN55022(A) + EN55024 + EN50 130-4
6. Emission: AS/NZS CISPR22
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 20
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
K. SUPPLIED ACCESSORIES:
1. CD-ROM (User’s Guide, SNC toolbox) (1)
2. Installation Manual (1)
3. Shoulder screw M4 (1)
4. Wire rope (1)
5. Warranty booklet (1)
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 21
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
L. OPTIONAL ACCESSORIES:
None
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 22
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
M. DIMENSIONS:
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 23
ARCHITECT & ENGINEER SPECIFICATIONS
SNC-CH220
©2014 Sony Corporation
Features and specifications are subject to change without notice. Non-metric
weights and measurements are approximate.
Sony is a registered trademark of Sony Corporation. IPELA and “Exmor” are
trademarks of Sony Corporation.
Microsoft, Windows, Windows Vista, Internet Explorer and DirectX are either
registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
Intel, Pentium and Intel Core are trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the United States and other countries.
All other trademarks are the property of their respective owners.
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
28 23 29 - 24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising