7” Portable Touch Screen Dock Setup Guide - In

7” Portable Touch Screen Dock Setup Guide - In
7” Portable Touch Screen
Dock Setup Guide
Seat Touch Screen Here
Speaker Jack
Power Jack
Supported Models
•
•
C4-TSM7-G-B (for Control4 7” Portable Touch Screen)
C4-TSMD-B Dock
What’s in the Box?
•
•
•
•
Control4 7” Portable Touch Screen Dock
AC Power Cord
DC Power Adapter
7” Portable Touch Screen Dock Setup Guide (this document)
Description
Use the 7” Portable Touch Screen Dock as the docking station for the 7” Portable Touch Screen.
How to Use the Dock
1.
2.
3.
4.
5.
6.
7.
Set the Dock on a flat surface.
Insert the speaker jack into the speaker jack slot on the back of the device.
Insert the power jack in the power jack slot on the back of the device, and then plug the power cord into a wall outlet.
Seat the 7” Portable Touch Screen in the slot on top of the device.
Refer to the 7” Portable Touch Screen Setup Guide for instructions about how to use the Touch Screen.
To clean the Dock, remove the Touch Screen and unplug the speaker jack and power jack.
Use a soft damp cloth to wipe off the surface.
Recycling
For information about Control4’s recycling program, go to www.control4.com/recycling.
Warranty
Limited 2-year Warranty. Refer to http://www.control4.com/warranty.
About this Document
Copyright ©2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo and the Control4 certified
logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. Pricing
and specifications subject to change without notice. Part Number: 200-00146 Rev B , 3/28/2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising