TRANS ATLANTIC DIESELS

TRANS ATLANTIC DIESELS
TRANS ATLANTIC DIESELS
TRANS ATLANTIC DIESELS
PERKINS SABRE M92 MARINE DIESEL ENGINES
Model
M92
91 HP @
2400 RPM
THE PERKINS SABRE M92
Maximum Power: 91 hp
Bore/Stroke: 4.02"/ 5.00"
Maximum RPM: 2400
Weight: 921 lbs
Capacity: 259 cu in
Length: 32.20"
Cylinders: 4
Width: 25.60"
Aspiration: N
Height: 30.60"
Typical Fuel Consumption: 2.00 UK gal/hr (2.40 US gal/hr)
The new generation of 4 cylinder, 4.23 litre, direct
injection marine diesel engines from the Perkins Sabre
partnership.
Premium engine features for reliability and durability
minimizes engine downtime and service costs. Marina
friendly design to operate free of smoke to the naked
eye combined with low noise. Lowest cost of ownership in
its class - it pays to compare running costs. Engine
interchangeability - designed to have installation
interchangeability with the 4.236 (M90) marine engine.
Unrivalled global and local service support - service
available wherever you are.
RELIABLE AND DURABLE POWER
This new generation engine has a pedigree of
reliability inherited from its predecessors replacing the
4.236(M90) which was the benchmark for the industry.
Cooling is provided by gear driven fresh and sea
water pumps - no longer any danger of coolant belt
failure.
Better cooling, a stronger structure along with quick
starting at even lower temperatures.
High capacity heat exchange equipment with high
quality cupro-nickel tubestack.
file:///C|/Documents%20and%20Settings/Owner/M...ocuments/Web%20Sites/trans/releases/ps-92.htm (1 of 5)4/25/2005 6:05:47 PM
TRANS ATLANTIC DIESELS
High capacity fuel filter with
pre-filter option and water alarm
facility minimizes failure due to
fuel contamination.
This new generation engine is
designed to give at least 12,000
hours productive service life
before needing a basic overhaul.
Low engine rated speed to
reduce wear and noise.
LOW COST OF OWNERSHIP
Operator costs are a vital consideration when deciding which engine to purchase. This is a
particularly important factor in craft where operating hours are significant.
Low fuel consumption, low cost of replacement parts and extended service intervals with
up to 500 hours oil change periods (for approved applications only) means low operator
costs.
Quick, easy and economical maintenance is made possible by convenient positioning of
service points for easy accessibility.
QUIET, CLEAN POWER
Developed from off-highway EEC and US Federal emissions legislation, the M92 is aimed at
surpassing future marine legislation. These new generation engines go further for the
operator and the environment by also operating free from visible smoke throughout the
operating speed range.
THE PERKINS SABRE M92 - Engine Specifications
Engine Configuration: 4 cylinder, in-line vertical, 4 stroke,
water cooled
Aspiration: Natural
Bore / Stroke: 103mm (4.1in) x 127mm (5.00in)
Displacement: 4.23 litre (258 cu. in.)
Compression Ratio: 18.5:1
Combustion System: Fastram direct injection
Engine Rotation: Clockwise viewed from front
Fuel Injection Equipment: Lucas rotary with electric and
manual stop.
Governing: Mechanical – all speed.
Continuous Engine Operating Angles: 20° front end up, 25°
sideways (35° sideways intermittent)
file:///C|/Documents%20and%20Settings/Owner/M...ocuments/Web%20Sites/trans/releases/ps-92.htm (2 of 5)4/25/2005 6:05:47 PM
TRANS ATLANTIC DIESELS
Power Take Off: Available from front end drive (for drive
limitations refer to Sabre Engines Ltd.
Weight (Wet): 418 kg (921 lb) engine only, 455 kg (1003 lb)
with ZF Hurth HSW450A gearbox, 499 kg (1100 lb) with
Newage PRM500D gearbox.
THE PERKINS SABRE M92 - Performance
file:///C|/Documents%20and%20Settings/Owner/M...ocuments/Web%20Sites/trans/releases/ps-92.htm (3 of 5)4/25/2005 6:05:47 PM
TRANS ATLANTIC DIESELS
THE PERKINS SABRE M92 - Equipment
Standard Equipment
Fresh water heat exchanger cooled engine with gear
driven self priming raw water and fresh water pumps or
keel cooling adaptor.
Fresh water cooled exhaust manifold combined with
intake manifold and heat exchanger.
Air intake with re-usable elements.
High inclination engine sump with sump drain facility
and top access dipstick.
Inverted spin-on element lube oil filter with "disc" type
oil cooler.
Totally enclosed engine breather.
High mounted single element fuel filter.
Manual control adaption parts.
Alarm switches and warning siren.
Optional Equipment
Marine Transmission (Standard): ZF Hurth HSW 450A Newage PRM500D/PRM265D - Borg Warner 10-18
Electrical: 12 or 24 volt electrics.
Exhaust Outlets: Water injected outlet. Dry exhaust flange.
Instrumentation: Simple and dual station instrumentation
including audible and visual alarms with gauges, senders,
switches, loom and varying lengths of interconnecting
cables. Simple tachometer panels are also available.
Mountings: Solid mounting brackets - flexible engine
mountings with alignment shims. Optional brackets and
flexible mountings when re-engining 4.236 (M90) engines.
PTO: Crankshaft PTO extension shaft with drive pulley.
Miscellaneous:
●
●
●
●
●
●
●
●
●
Sump drain pump (supplied loose).
Belt guard.
Solid or flexible output couplings.
Engine mounted electro-magnetic bilge pumps.
Fuel pre-filter with water alarm.
Flexible fuel feed and return pipes.
Calorifier connections.
Tool Kit.
On-board Parts Kit.
file:///C|/Documents%20and%20Settings/Owner/M...ocuments/Web%20Sites/trans/releases/ps-92.htm (4 of 5)4/25/2005 6:05:47 PM
TRANS ATLANTIC DIESELS
THE PERKINS SABRE M92 - Dimensions
All dimensions with ZF Hurth HSW 450A Transmission fitted.
Call us at 1-800-927-9295 for more information.
file:///C|/Documents%20and%20Settings/Owner/M...ocuments/Web%20Sites/trans/releases/ps-92.htm (5 of 5)4/25/2005 6:05:47 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising