Turbo Z - Gianni Ferrari
Excellent handling and efficiency
Turbo Z is a ZTR (Zero Turning Radius) machine with two
independent hydrostatic transmissions on the drive wheels
which allow the machine to turn around on itself with a
zero turning circle, giving maximum agility.
The low and compact design allows the machine to be
very nimble between trees, flowerbeds and bushes, in
small gardens and on narrow pathways.
The manoeuvrability of the Turbo Z drastically reduces
manoeuvring and the need for manual trimming.
This, together with the high speed of the machine (up to
13 km/h), guarantees high hourly productivity.
The dual fuel tanks, with a capacity of over 40 litres,
allow for longer work periods (up to 10 hours) without
The strong 3-cylinder diesel engine provides high
efficiency, superior performance whilst reducing
running costs.
Turbo Z 223
Turbo Z 322 D
Complete accessibility
All regular inspection points can be reached
easily. Routine maintenance and grease
points are reduced to a minimum.
A comfortable drive
The driving system with 3 levers (2 steering
levers and 1 speed control lever) provides
an effortless and precise control by the
operator. The dashboard on the right fender
provides information at a glance.
The Turbo Z is fitted, as standard, with a
comfortable contour-moulded seat which
is lengthwise adjustable.
On request, a super comfortable Grammer
seat is available with lumbar support
and headrest, adjustable armrests and
suspension. A heated version is also
available as option.
• Better cutting quality as grass is not compacted before being cut
• Better visibility and comfort for the operator
• Better manoeuvrability and cut in areas that cannot be reached by mid-mounted decks
• Better terrain following and superior finish, something that mid-mounted decks
cannot achieve
• Easier deck maintenance, tilts to vertical for easy service and debris removal.
Mulching / Rear Discharge deck
Turbo Z mulching / rear discharge decks are floating so as to adapt naturally to the
undulations in the ground for a more accurate cut. The deck carrier frame is fitted with
puncture proof, semi pneumatic tyres. The infinitely-variable cutting height adjustment is
carried out easily from the operator seat by pressing an electric control button. The same
control is used, without any effort from the operator, to get the deck in vertical position for
easy cleaning and maintenance or to reduce the machine dimensions for transportation or
•The mower deck with cutting width of 112 cm, has a cutting chamber very deep,
made from a single pressed steel sheet, without add-ons. This means the underside is
completely smooth, without sharp corners, for optimum air flow. Conversion mulching /
rear discharge is rapid and does not require tools thanks to a special baffle system.
•The Dual-Cut™ 132 cm mower is a heavy-duty fabricated deck with reinforced leading
edge that can be replaced after wear. The mower is fitted with an easy-to use quick
conversion system. Just operate the handy lever to change in an instant the type of cut,
mulching or rear discharge. The anti-shock release device protects the system against
Flail mower
It is suitable both for
cutting fine grass that for
the clearing of rustic areas
and brushwood. Available
with working widths of 110
or 135 cm (only for diesel
Side discharge
With a working width of
150 cm, this is a highly
productive deck, ideal for
mowing large open areas.
Available only for diesel
Aerator /
Power take-off and hydraulic lift
The PTO is engaged by pressing a pushbutton activating
a powerful electromagnetic clutch. The clutch is
adjustable to maintain efficiency over time. The clutch
safety brake for stopping the PTO is integrated in the
The power transmission from the engine to the front
attachment is provided by a PTO shaft with higher
efficiency and reliability than a conventional belt
The diesel version is also fitted with a convenient front
hydraulic lift device enabling the machine to mount kerbs
and other obstacles, simply by pressing a pushbutton.
Bar tread, low-pressure
traction tyres (optional)
guarantee maximum
grip even in the toughest
Rear twin-wheel for light
pressure over lawns and
great swiftness.
Oscillating rear axle to
make it easier to load
and unload the machine
from a van or a trailer
with just two ramps.
Covers large areas in a
short time. It is suitable
for thatch removal and
for preparing the area for
Snow blade
The 130 cm snow blade
it allows the Turbo Z to
be useful and productive
throughout the winter.
Snow thrower
The two-stage snow
thrower has a working
width of 110 cm. It can
be fitted with a plexiglass
screen to protect the
operator (optional).
Turbo Z 223
Turbo Z 322 D
Vanguard V-Twin 386400
Kubota D902
23 hp / 627 cc.
22 hp / 898 cc.
2 / Air
3 / Liquid
Pressure lubrication system with gear pump – cyclone-type air filter with self cleaning prefilter – fuel filter (diesel)
43 L
43 L
Dual integrated transaxles with external oil filter
13 km/h
13 km/h
2 control levers for steering and forward/reverse motion + 1 lever for speed control and neutral position. Zero Turning Radius (ZTR)
Hydrostatic service brake (neutral position). Mechanical parking brake inside the transaxles
20 x 10.00 - 8
21 x 11.00 - 8
13 x 5.00 - 6
13 x 5.00 - 6
20 x 10.00 - 8
21 x 11.00 - 8
13 x 5.00 - 6
13 x 5.00 - 6
Mechanical, with PTO shaft / Electric engagement by PTO button (electromagnetic clutch)
Hydraulic with 2 arms
12 V / 50 Ah – battery isolator master switch as standard
EEC European Standard / ISO
Hour meter
Engine oil pressure – parking brake
12 V / 60 Ah – battery isolator master switch as standard
EEC European Standard / ISO
Hour meter – coolant temperature
Engine oil pressure – coolant temperature – battery (alternator fault) –
glowplug – parking brake
Weight and measures (tractor unit only, basic version)
Unloaded weight
325 kg
Length / Width / Height
160 x 102 x 105 cm
440 kg
170 x 112 x 119* cm
* with ROPS folded down
The availability of models, versions and trim may vary depending on the country.
Mulching / rear discharge deck
Cutting width / No. Blades
112 cm (44") / 3 blades
Cutting height adjustment
Electric, from the operator seat. Infinitely-variable from 1 to 9 cm
Vertical position
75 kg
Dual-Cut™ mulching / rear discharge deck
Cutting width / No. Blades
132 cm (52") / 3 blades
Cutting height adjustment
Electric, from the operator seat. Infinitely-variable from 1 to 9 cm
Vertical position
134 kg
Side discharge deck
Cutting width / No. Blades
Cutting height adjustment
Vertical position
Flail mower
Cutting width / Blade reel
110 cm (43") / 48 flails (24 pairs)
Cutting height adjustment
2 cm to 8 cm
144 kg
Aerator / dethatcher
Working width / Blade reel
100 cm (40") / 28 mobile blades
90 kg
Snow blade
Working width / Angling
130 cm (51") / ± 30°, mechanical
80 kg
Snow thrower
Type / Working width
Double stage / 110 cm (43")
140 kg
112 cm (44") / 3 blades
Hydraulic, from the operator seat. Infinitely-variable from 1 to 9 cm
75 kg
132 cm (52") / 3 blades
Hydraulic, from the operator seat. Infinitely-variable from 1 to 9 cm
134 kg
150 cm (59") / 3 blades
Quick adjustment with SA™ lever, 2 cm to 8 cm
140 kg
110 cm (43") / 48 flails (24 pairs) 135 cm (53") / 56 flails (28 pairs)
2 cm to 8 cm
2 cm to 8 cm
144 kg
158 kg
100 cm (40") / 28 mobile blades
90 kg
130 cm (51") / ± 30°, hydraulic
80 kg
Double stage / 110 cm (43")
140 kg
In their constant bid to improve performance levels, Gianni Ferrari reserves the right to alter any technical aspects or performance, without prior warning.
Likewise the models in this catalogue are subject to change. No liability is accepted for any possible misprints.
campbelladv.com 50714 - Printed in Italy 09.14
Power / Displacement
No. Cylinders / Cooling
Fuel tank capacity
Hydrostatic transmission
Driving wheels
Transmission type
Max forward speed
Driving system
Front Turf tyres
Front bar tread tyres (optional)
Rear twin-wheel
Oscillating rear axle (optional)
Power Take-Off
Type / Engagement
Front lift
Electrical system
Safety sensors
Standard equipment
Warning system
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF