Call status - YX International Information Co., Ltd.

Call status - YX International Information Co., Ltd.
China YueXun network Technology co.,Ltd.
YX GoIP
User
Manual
V1.1
http://www.yx19999.net
Tel: 86-752-2777557 Fax:86-752-2159233
Office Address: 2-2308 Yixin Building No.11 Huabianling South Road ,Huizhou city | Guangdong,China
1
China YueXun network Technology co.,Ltd.
Content
About............................................................................................................................................................. 3
 Introduction........................................................................................................................... 3
 TECHNICAL PARAMETER............................................................................................... 4
 View.......................................................................................................................................5
Quick Start..................................................................................................................................................... 7
 Insert SIM cards.................................................................................................................... 7
 Connect Device..................................................................................................................... 8
 Check Device IP.................................................................................................................... 9
 Log Into The Management Web..........................................................................................10
 Connect To Network............................................................................................................11
 Connect To SIP Server........................................................................................................ 12
How To........................................................................................................................................................ 13
 How to change GoIP WAN default IP?...............................................................................13
 How to Insert SIM cards?....................................................................................................15
 How to make test VOIP calls?.............................................................................................15
GoIP Details.................................................................................................................................................16
Status..................................................................................................................................................16
 System status....................................................................................................................... 16
 SIP status............................................................................................................................. 18
 Call status............................................................................................................................ 18
 InterCall Statistics............................................................................................................... 19
 Network Setting...................................................................................................................20
 SIP Setting........................................................................................................................... 20
 Port Setting.......................................................................................................................... 21
 Base Station......................................................................................................................... 23
 IMEI Setting........................................................................................................................ 24
 Rule......................................................................................................................................26
 Mobile..................................................................................................................................27
 SMS..................................................................................................................................... 27
 Automation.......................................................................................................................... 29
System............................................................................................................................................... 31
 Codec................................................................................................................................... 31
 Network Debug................................................................................................................... 33
 User & Device..................................................................................................................... 33
 Update & Restore................................................................................................................ 35
 Save & Reboot.....................................................................................................................36
 Initialization.........................................................................................................................36
2
China YueXun network Technology co.,Ltd.
About
 Introduction
YX INTERNATIONAL INFORMATION Co., Ltd.
is a manufacturer of VoIP Gateways, GSM VoIP gateways, with well-equipped testing
equipment and strong technical force. With a wide range, good quality, reasonable prices
and stylish designs, our products are extensively used in communication industry and
other industries. Our products are widely recognized and trusted by users and can meet
continuously developing economic and social needs.
We welcome new and old customers from all walks of life to contact us for
future business relationships and achieving mutual success!
And we set up a new team for voice wholesale business two years ago. Currently
there are five departments with professional teammates for voice business-Carriers Relations Dep, NOC Dep, Rate Dep, Billing & Finance Dep, customer Care
Dep.
We mainly focus on Asia and ME destinations and have more A-Z direct routes
such as Pakistan, Vietnam ect. We are carrying more than Twenty Million minutes
international outbound and inbound traffic monthly.
We treat every partner as our best friend because we insist on sincerity, trust and
open-minded will be the key to the success for both parties. We sincerely
welcome all VOIP interconnection.
YX-GoIP Gateway is a multi-functional and high performance product, which is
designed with advanced embedded technology. YX-GoIP is able to process
traditional voice call service and internet data service. It adapt new hardware and
software structure, which supports up to 16 concurrent calls and perfectly
support G729a/b/e, G723.1, G.711 A/U law and iLBC codecs at the same time.
3
China YueXun network Technology co.,Ltd.
 TECHNICAL PARAMETER
Relay Encryption Solution(Fix IP blocking)
Features
Network
SIM Frequency
Software
Hardware
Bandwidth Optimization
Support SIM Rotating(one channel including 4 SIM cards)
Changing SIM automatically(Fix SIM blocking)
Base Station Switch
SIM Hot Plugging
Remote Control(Access your device system anywhere)
Multi-Codec Support(G729 a/b/e,G723,G711 A/U law,iLBC)
SMS Receive & Send
Upgrade online or local
IPv4,TCP,UDP
DHCP, DNS, PPPoE
Telnet, STUN
HTTP,FTP,TFTP,ARP,NTP
Encryption
WAN,LAN,USB
GSM:850/900/1800/1900MHz
CDMA:450/800/1900MHz
WCDMA:850/900/1800/1900+2100MHz
Guide Initialization Web
Call Forwarding
PIN Code Management
AT, SMS,USSD
Personification
Caller Anonymous
Avoid FAS
High-Q ASR,ACD
Echo/Silence control
VOL control
RTP/RTCP RFC3551
SIP V2.0 RFC3261
Qos
IVR
Black/White List
Linux Operation(Safe & Stable)
Cooling Fans
Power Input:100-240V~50-60Hz 1.2A MAX
Power Output:12V/5A
RJ45&USB Cable support
16 Antennas
Working Temperature:0~+50℃
Working Moisture: 10 ~ 90 % RH
HTTP Web Browser: Firefox/Chrome /IE/Opera
16 Channel 64 SIM cards/16 Channel 16 SIM cards
USB Serial Port , Baudrate:115200,8,n,1,n
4
China YueXun network Technology co.,Ltd.
5
 View
5
China YueXun network Technology co.,Ltd.
1, SIM slots: The 16/64 GoIP device can read 64 SIMs totally. It means the
gateway can support 16 calls concurrently (16 channels), and each channel can
read 4 SIMs named A,B,C,D (This SIMs will rotate to avoid blocking).
2, Channel number.
3, Channel LED: One channel include 4 LEDs for ABCD SIMs.
ACT
Startup(Rebooting)
Fail mobile connection
Calling
Idle or No SIM
LED Status
All ON
Blink
ON
Off
4, Power LED.
5, RESET: Restore the factory default (Press the button and hold on for more than 5s).
6, Power connector.
Input power: 100-240V ~ 50-60Hz 1.2A MAX
Output power: 12V/5A
7, LAN: Ethernet port.
100M/10M Adaptive
8, WAN: Ethernet port.
100M/10M Adaptive
The default WAN IP is 192.168.1.10 .
9, CONSOLE: USB serial port.
Baud rate: 115200, 8.n.1.n
10, Antenna connector.
11, Cooling fans: Support 2 mode – ON & Automatic (When Control center detect
the CPU too hot, fans will be ON, otherwise it will OFF).
Working Temperature: 0 ~ +50℃
Working Moisture: 10 ~ 90 % RH
6
China YueXun network Technology co.,Ltd.
Quick Start
 Insert SIM cards
A/C: The chip side towards up.
B/D: The chip side towards down.
7
China YueXun network Technology co.,Ltd.
 Connect Device
Connect the power adapter to keep power on, connect a RJ45 network cable from
GoIP WAN port to a router ① LAN port (The router should be connected to
internet).
router: A device used for visiting internet, such as TP-Link, Tenda, D-Link
 Check Device IP
The GoIP WAN default IP is 192.168.1.10 .
1, If the router LAN IP is 192.168.1.1 , the GoIP default IP will be OK.
2, If the router LAN IP is not 192.168.1.1, for example 192.168.0.1, the GoIP
default
IP should be corrected. How to change it?
8
China YueXun network Technology co.,Ltd.
 Log Into The Management Web
After retrieving the IP address, open browser (IE, Chrome, FireFox, Opera …), input
the IP address and the login web will return. The username & password will be needed
to log into.
Default Account is root, password is root.
When login successfully, the “Initial Setting” guide page will be help to make
gateway working more easily.
Actually, only IP address and SIP info are needed then the GoIP gateway can start to transfer
VOIP calls.
9
China YueXun network Technology co.,Ltd.
 Connect To Network
Dynamic IP: DHCP ② mode, get an IP address from the network
router automatically.
② DHCP: Dynamic host configuration protocol.
Static IP: set IP address manually.
1, The WAN IP should be in the segment of the router.
2, The WAN IP should be unique or it will conflict with other network devices. 3,
Check the IP Mask and Default Gateway in your router configuration.
The WAN IP segment will be same with the router which gateway connect to. For example,
the router LAN IP is 192.168.10.1, and the gateway WAN IP should be 192.168.10.xxx.
PPPoE③: User account and password are needed from your ISP④.
③ PPPoE: Point-to-Point Protocol over Ethernet.
0
ISP: Internet Service Provider.
10
China YueXun network Technology co.,Ltd.
 Connect To SIP Server
Phone Number: (same with SIP id or keep it empty)
Account: (The SIP id created in the SIP server)
Password: (The SIP password created in the SIP server)
SIP Server: (The SIP server IP address or domain name)
SIP Sever Port: (The SIP server SIP port, default port is 5060)
11
China YueXun network Technology co.,Ltd.
How To
 How to change GoIP WAN default IP?
If the router’s LAN IP segment is not same with GoIP WAN segment
(192.168.1.10), need modify GoIP default IP.
First, connect a computer to the same router with GoIP, add the GoIP IP
segment in the computer.
12
China YueXun network Technology co.,Ltd.
Save it, then input “192.168.1.10” in the browser, log into the page and change
the WAN IP to be compatible with the router. How to change WAN IP?
13
China YueXun network Technology co.,Ltd.
 How to Insert SIM cards?
Refer to “ Insert SIM cards”.
 How to make test VOIP calls?
After Preparation Work is done, insert cards & network connected, a test call
is necessary.
1, Download a softphone, like x-lite, install and run it.
2, Connect this softphone with GoIP peer to peer.
14
China YueXun network Technology co.,Ltd.
Display Name, User name, Password can be anything.
Domain: Input GoIP WAN IP.
Unchecking the “Register with domain and receive incoming calls”.
3, Dial a phone number and test.
15
China YueXun network Technology co.,Ltd.
GoIP Details
Status
Show the device status.
 System status
Network status: WAN and LAN port.
WAN is used to connect to network, LAN is used to connect to computer if necessary.
System status
16
China YueXun network Technology co.,Ltd.
Current Time: (The device will proofread time with NTP server)
Set the Time Zone in “System Settings->User & Device” page.
Running Time: (Show the gateway uptime)
Current Version: (The current firmware version)
Released Time: (The current firmware version release time)
Call Statistics
Show the call data.
PortNo.: SIM No..
Calls: Received calls need to be sent out.
Alerted: Sent out calls number.
Connected: Calls connected successfully.
Consecutive Fails: Calls sent out with aborted consecutively.
No Carriers: Calls disconnected with No Carriers.
PDD: Delay time of returning calls info.
This Call Statistics data is temporary, disappear after rebooting. Of course, the user can
clear it manually with clicking the “clear Data” button.
clear it manually with clicking the “clear Data”
 SIP status
17
China YueXun network Technology co.,Ltd.
Show the SIP status.
PortNo.: The channel No.
Registration Status: The status of connecting to SIP server.
Module Status: ON/OFF.
 Call status
Port: The current SIM port.
Call Status: IDLE/INVITE/Alerting/Connected/DSC.
SIM Led: SIM mobile network status.
Registering:
Register fail:
Registered:
Invalid
SIM:
Calling:
Sleep
SIM:
Lock
ed:
Provider: The SIM MNC⑤ or Mobile operator name.
⑤
code.
MNC: Mobile network
ASR:
average
success
ratio.
ACD: average call ratio.
IMEI: International Mobile Equipment Identity with 15 digits.
18
China YueXun network Technology co.,Ltd.
 InterCall Statistics
19
China YueXun network Technology co.,Ltd.
Setting
 Network Setting
Refer to “Connect To Network”
If the IP parameters changed, need to reboot to make it active.
 SIP Setting
Encryption Method: NONE/Security/VOS2000
NONE: No Encryption
Security: Transfer calls with proxy server in a security way.
SIP parameters: Refer to “ Connect to SIP Server”.
Primary Proxy IP: The security relay proxy server IP address.
Proxy Port: Relay proxy port.
20
China YueXun network Technology co.,Ltd.
Contact the YX tech support to install proxy server software.
We suggest that keep this advanced setting default, any problems, please
contact YueXun tech support online.
 Port Setting
The SIM cards mobile network jump among different frequency to search
base station. Some SIMs only support one frequency or dual band, to save
the mobile registration time,select the correct Frequency Band and Lock The
Operator.
The gateway hardware modules are controlled by “AT Command”, and the
SIM can get extend service by sending USSD Command from SIM operator.
Checking frequency is supported to limit in “Time Interval”. And calls can
happen directly in “Manually Call” to callee number typed, it’s easy to check
21
China YueXun network Technology co.,Ltd.
SIMs inside if they are working, no need to take out SIM and insert it to
mobile phone anymore.
 Base Station
User can limit the base station numbers and time allowed to connect, then
the SIMs won’t jump among them too frequent to get poor calling quality.
Surely, the optimization and binding are both supported in “Base Station
Setting/Operations” panel.
22
China YueXun network Technology co.,Ltd.
 IMEI Setting
Some mobile operators detect SIM cards working with unconventional use,
not only block SIM cards but also device IMEI, if IMEI can’t be modified, GoIP
gateways active one-time.
Input IMEI number for each ports Manually.
Input a Start IMEI number with 15 digits;
Input the IMEI database capacity around size.
A new IMEI number will be active after rebooting or changing SIMs.
23
China YueXun network Technology co.,Ltd.
 Rule
Outbound Prefix: The rule take effect when GoIP is used for terminal. Original
Prefix: The called number prefix reach GoIP from SIP server. Translated Prefix:
Another number which GoIP rewrite the Original prefix to.
Callerid Hidden: Hide the SIMs number in GoIP when Callee ’s phone receive the
VOIP calls.
This option take effect only when the SIM support it.
24
China YueXun network Technology co.,Ltd.
 Mobile
When SIMs inside need PIN code to unlock, user can type those code in this ABCD
option in advanced.
 SMS
Operations: Click “Details” button to jump to “SMS Details” page.
25
China YueXun network Technology co.,Ltd.
Choose different port and different SIM to check SMS received.
Select a single port or ALL ports to send single/bulk SMS.
26
China YueXun network Technology co.,Ltd.
 Automation
This section is being designed to be personate to avoid SIM blocking
automatically. Even so, more information about local mobile operator,
such as SIM blocking rule or law, then a safe schedule setting will be
helpful and effective.
This panel allow SIMs in the gateway to call each other randomly. Consider that
SIMs inside only call out all the time, so it’s easy to be judged as an illegal use.
When enable “Port Inter-Calling”, every SIM can receive income call in period
which is custom option in “Conditions Settings”.
27
China YueXun network Technology co.,Ltd.
Some mobile operators detect SIM cards used only in calling without sending
SMS, SIM’s blocked.
SMS Warning: A SMS warn the gateway manager to check the SIMs when
they are locked⑥.
⑥ locked: Not mobile operator blocking, it’s the politic schedule to limit the
SIM use time, use frequency to avoid blocking. It doesn’t mean this SIM can’t be used
anymore, just sleep temporarily. How to lock?
28
China YueXun network Technology co.,Ltd.
User can limit each SIM total call duration, OK calls amount, failed calls, no
carrier calls, no ring calls, no answer calls and short duration calls. This option
will help to improve the ASR, ACD.
Every condition takes effective, the current SIM will be locked, the next one in this channel is
working⑦.
⑦There are 4 SIMs ABCD in each channel. A locked, B works; B locked,
C works; C locked, D works; D locked, A works and so on.
System
 Codec
G729, G.723, G.711, iLBC and AMR are supported.
29
China YueXun network Technology co.,Ltd.
Option about voice include volume, ring type. We suggest users to keep them
default when this parameters are not understood well.
 Network Debug
A ping tool is easy to check the gateway network status. Especially when calls
can’t connect but every SIP parameters are correct, this tool will be helpful to find
out problems.
30
China YueXun network Technology co.,Ltd.
 User & Device
Support different Account level to log into this gateway management web page.
Device Alisa: Give this gateway a new name.
Time Zone: Set device
time to different location.
Auto reboot at specified time is supported. Set the reboot in option
“Scheduled Reboot”.
Most of time, GoIP gateways don’t have public static IP, so can’t be logged into in
other network. But if there is a server, ERM remote software installed in, remote
access will be possible.
Contact YueXun tech support to install this ERM remote software in your server.
acce ss will be possible.
31
China YueXun network Technology co.,Ltd.
 Update & Restore
Import upgrade firmware, configuration files in “Import File”.
Save your configuration setting and export it, then restore in “Import File” option.
Restore to factory will remove all your current settings and set to factory default.
This reset won’t remove IP parameters, after this action, user can log into the
web page with input the old IP. How to reset IP with restore to factory
default?
32
China YueXun network Technology co.,Ltd.
 Save & Reboot
Save settings and reboot.
 Initialization
Initial Setting page is used to be easy starting for gateway user at the first time.
When SIP info are empty, this welcome page show in the browser when user log
into it, otherwise, “System Status” is the default page. How to set this page?
32
33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising