How to activate your SafeCom
How to activate your SafeCom-account (to print out) You only have to do this once! 1. Open your browser and go to http://sikker-print.nih.no/safecom 5. Choose ”Setup” and click “Generate new PUK” – maximize the window if you don’t see the orange button: 2. Type in NIH\username and password. \ -key is located next to “Backspace” on the keyboard. 6. Click “OK” in the window “Message from webpage”: 3. Choose “Oppsett”: 7. A PUK code is generated and displayed, and your account is activated: 4. Choose “Språk” and change to English in the next window. Save the settings. 8. Write down the PUK code and register your student card at the printer (see the next page). How to register your student card You only have to do this once! 1. Hold your Student Card over/on the card reader on the printer. How to use the printers 1. Print out the document(s) from your computer: Fil (File) -> Skriv ut (Print Out) 2. Choose the printer “Lexmark-Safecom” and click “Skriv ut” (Print Out). The documents are sent to a print out-queue and you can print out from any of the Student Printers at the school. 2. Click one of the icons (Kopi = copy, E-post = scan): 3. Hold your Student Card over/on the card reader to log on. 4. Click “Pull Print” in the printer display, and choose the document(s) you would like to print out. You can also click “Print all” to print out all your documents. 5. Remember to log off when you have finished printing out! 3. The printer asks you to type in your PUK code. Click “Neste” (Next). 4. Type in your PUK code and click “Neste” (Next) to finish the registration. Now you can use the printers.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project