2 - Oki
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS
Quick Start Guide
ES9460 MFP
ES9470 MFP
CX3535 MFP
CX4545 MFP
Lineup of Our Manuals
Some of these manuals are printouts and others are PDF files recorded in the User Documentation CD-ROM.
In the printouts, precautions and basic operations are described. Be sure to read “Safety Information” before using the
equipment. In the PDF files, detailed copying functions and other settings are described. Select and read those best suited to
your needs.
Printouts
Safety Information
This Safety Information describes the necessary precautions for use. For your added security, be
sure to read this booklet first.
ES9160 MFP/ES9170 MFP
ES9460 MFP/ES9470 MFP
CX3535 MFP/CX4545 MFP
Quick Start Guide (This manual)
This Quick Start Guide describes the preparations, basic and advanced usage, maintenance and
regular cleaning of the equipment.
ES9460 MFP
ES9470 MFP
CX3535 MFP
CX4545 MFP
How to use the User Documentation CD
1. Set the User Documentation CD in the CD-ROM drive on your computer.
2. Open the [OKI MFP Manual] folder in the User Documentation CD and the [PDF] folder.
3. Double-click the file of the operator’s manual to be viewed. Its PDF file is displayed.
PDF files
Copying Guide
TopAccess Guide
This Copying Guide describes the operations and settings
enabled with the [COPY] button on the control panel.
This TopAccess Guide describes procedures for remote
setup and management from a web-based utility,
“TopAccess”.
This “TopAccess” web utility enables you to manage the
equipment using the browser on your computer.
Scanning Guide
This Scanning Guide describes the operations and settings
enabled with the [SCAN] button on the control panel and
those of Internet Fax.
e-Filing Guide
This e-Filing Guide describes the operations and settings
enabled with the [e-FILING] button on the control panel
and the e-Filing web utility.
This e-Filing web utility enables you to operate e-Filing
using the browser on your computer.
MFP Management Guide
This MFP Management Guide describes the operations and
settings enabled with the [USER FUNCTIONS] button and
the [COUNTER] button on the control panel.
Software Installation Guide
This Software Installation Guide describes the installation
procedures for printer drivers and utilities.
Troubleshooting Guide
This Troubleshooting Guide describes how to deal with
problems, such as paper jams, as well as how to react to
messages displayed on the touch panel.
Network Fax Guide
This Network Fax Guide describes the operations of the Fax
Driver.
The Fax driver enables you to send electronic documents as
faxes or Internet faxes from your computer.
GD-1250/GD-1260 Operator’s Manual for
FAX Unit
This Operator’s Manual describes how to use the fax
functions.
High Security Mode Management Guide
Printing Guide
This Printing Guide describes the settings of printer drivers
required for printing and the various procedures.
This High Security Mode Management Guide describes the
conditions and settings to use the equipment in the high
security mode.
Operator’s manuals of options
In the following options sold separately, the corresponding
operator’s manuals are co-packed.
• GN-1060 Operator’s Manual for Wireless LAN Module
• GN-2010 Operator’s Manual for Bluetooth Module
• GP-1070 Operator’s Manual for Data Overwrite Enabler
• KP-2004 Operator’s Manual for e-BRIDGE ID Gate
• KP-2005 Operator’s Manual for e-BRIDGE ID Gate
To read manuals in PDF (Portable Document Format) files
Viewing and printing manuals in PDF files require that you install Adobe Reader or Adobe Acrobat Reader on your PC. If
Adobe Reader or Adobe Acrobat Reader is not installed on your PC, download and install it from the website of Adobe
Systems Incorporated.
How to Read This Manual
Symbols in this manual
In this manual, some important items are described with the symbols shown below. Be sure to read these items before
using this equipment.
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or
serious damage, or fire in the equipment or surrounding objects.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury,
partial damage to the equipment or surrounding objects, or loss of data.
Indicates information to which you should pay attention when operating the equipment.
Read the following description as required.
Describes handy information that is useful to know when operating the equipment.
Indicates the pages describing items related to what you are currently doing.
Description of original/paper direction
Paper or originals of A4 or B5 / LT size can be placed either in a portrait direction or in a landscape direction. In this
manual, “-R” is added to this paper size when this size of paper or original is placed in a landscape direction.
Example: A4 / LT size original on the original glass
Placed in a portrait direction: A4 / LT
Placed in a landscape direction: A4-R / LT-R
Paper or originals of A3 or B4 / LD or LG size can only be placed in a landscape direction, therefore “-R” is not added to
these sizes.
Screens and Operation Procedures
• In this manual, the screens and the operation procedures in Windows are described for Windows 7.
The details on the screens may differ depending on how the equipment is used, such as the status of the installed
options, the OS version and the applications.
• The illustration screens used in this manual are for paper in the A/B format. If you use paper in the LT format, the display
or the order of buttons in the illustrations may differ from that of your equipment.
2
CONTENTS
How to Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Recommended toner cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter
1 PREPARATIONS
Description of Each Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Turning Power ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Placing Paper and Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter
2 BASIC OPERATION
Basic Copying Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Basic Fax Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Basic Scanning Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Basic e-Filing Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Basic Printing Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Basic Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Chapter
3 MAINTENANCE / TROUBLESHOOTING
Replacing Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replacing Waste Toner Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Replacing Staple Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Regular Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter
4 ADVANCED FUNCTIONS
Advanced Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter
5 INFORMATION ABOUT EQUIPMENT
Items Included in This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Client Utilities CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Logging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Specifications of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Specifications of Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
INDEX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
3
Recommended toner cartridges
To assure optimal printing performance, we recommend that you use only genuine OKI toner cartridges. If you use an
OKI-recommended toner cartridge, you can utilize the following three functions of this equipment:
• Cartridge detecting function:
This function checks if the toner cartridge is correctly installed and notifies you if it is not.
• Toner remaining check function:
This function notifies you when there is little toner remaining in the cartridge, as well as notifying it to your authorized
service representative automatically by the remote service.
• Image quality optimization function:
This function controls image quality according to the characteristics of the toner to be used and enables you to print
images of an optimal quality.
If you are using a toner cartridge other than the one we recommend, the equipment may not be able to detect whether
it is installed or not. Therefore, even if the toner cartridge is correctly installed, the error message “TONER NOT
RECOGNIZED” appears on the touch panel and printing may not be performed. You may also not be able to utilize the
image quality optimization function, the toner remaining check function and the remote service function notifying your
authorized service representative automatically.
If you are using a toner cartridge other than the one we recommend, toner is not recognized. If this is a problem for you,
please contact your service representative. Remember you will not be able to utilize the Toner remaining check function
and Image quality optimization function as we mentioned.
Trademarks
• The official name of Windows XP is Microsoft Windows XP Operating System.
• The official name of Windows Vista is Microsoft Windows Vista Operating System.
• The official name of Windows 7 is Microsoft Windows 7 Operating System.
• The official name of Windows Server 2003 is Microsoft Windows Server 2003 Operating System.
• The official name of Windows Server 2008 is Microsoft Windows Server 2008 Operating System.
• Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft products are
trademarks of Microsoft Corporation in the US and other countries.
• Apple, AppleTalk, Macintosh, Mac, Mac OS, Safari, and TrueType are trademarks of Apple Inc. in the US and other
countries.
• Adobe, Acrobat, Reader, and PostScript are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
• Mozilla, Firefox and the Firefox logo are trademarks or registered trademarks of Mozilla Foundation in the U.S. and
other countries.
• IBM, AT and AIX are trademarks of International Business Machines Corporation.
• NOVELL, NetWare and NDS are trademarks of Novell, Inc. in the US.
• Other company and product names given in this manual or displayed in this software may be the trademarks of
their respective companies.
4
Chapter
1
PREPARATIONS
Description of Each Component . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Turning Power ON/OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Placing Paper and Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 1 PREPARATIONS
Description of Each Component
This section describes the names and operations of the equipment, control panel and touch panel.
Front / Right side
Back side
1
3
2
4
14
7
8
13
5
12
9
11
1.
Reversing Automatic Document Feeder
(optional, MR-3022)
The stack of originals is scanned one sheet at a time. Both
sides of the originals can be scanned. A maximum of 100
sheets (80 g/m2 or 20 lb. Bond) can be placed in one go.
(The maximum number of sheets that can be set may vary
depending on the media type of the originals.)
2.
Operator’s Manual Pocket (back side, optional,
KK-1660)
Keep the manual in this pocket.
3.
Main power switch
Use this switch to turn the power of the equipment ON or
OFF.
P.13 “Turning Power ON/OFF
4.
USB port
Use this connector when printing files stored in a USB
device or storing scanned data into the USB device.
5.
USB terminal (4-pin)
Use this terminal when connecting this equipment to a PC
with a commercially available USB cable.
6.
Network interface connector
Use this connector when connecting this equipment to a
network.
7.
Automatic duplexing unit
This unit makes copies on both sides of the paper. Open it
when paper jams occur.
8.
Bypass tray
Use this to perform printing on special media types such
as OHP film, waterproof paper, etc.
P.25 “Bypass copying” in this manual
6
6
10
9.
Paper feed cover
Open this cover when releasing paper misfed in the
drawer feeding area.
10. Paper Feed Cover (optional)
Open this cover when releasing paper misfed in the Paper
Feed Pedestal (optional) or Large Capacity Feeder
(optional).
11. Paper size indicator
The size of the paper set in the drawer can be checked.
12. Paper Feed Pedestal (optional, KD-1027) and
Additional Drawer Module (optional, MY-1035)
or Large Capacity Feeder (optional, KD-1028)
Use the Paper Feed Pedestal (optional) to add one drawer.
The Additional Drawer Module (optional) can be installed
in this device.
A maximum of 2500 sheets (80 g/m2 or 20 lb. Bond) of
plain paper can be placed in the Large Capacity Feeder
(optional).
13. Drawer
A maximum of 550 sheets (80 g/m2 or 20 lb. Bond) or 500
sheets (105 g/m2 or 28 lb. Bond) of plain paper can be
placed in one go.
P.16 “Placing paper” in this manual
14. Front cover
Open this cover when you replace the toner cartridge and
clean the charger.
Description of Each Component
Left / Inner side
1
5
2
3
4
12
11
Yellow
Magenta
Cyan
Black
1
10
9
6
7
8
1.
7.
Platen sheet
Use this to hold the original on the original glass to scan it.
P.44 “Regular Cleaning” in this manual
2.
3.
Control panel
Use this to set and operate various types of functions such
as copying and fax.
P.8 “Control panel” in this manual
5.
Toner cartridge
When toner runs out, the message appears on the touch
panel. Replace the cartridge following the procedure
below.
P.38 “Replacing Toner Cartridge” in this manual
6.
8.
Charger cleaner
Use this if unevenness occurs on the copied or printed
paper.
Troubleshooting Guide (PDF): “Chapter 1:
TROUBLESHOOTING FOR THE HARDWARE”
Waste toner box
When “Dispose of used toner” appears on the touch panel,
replace the waste toner box according to the following
procedures.
P.39 “Replacing Waste Toner Box” in this manual
Touch panel
Use this to set and operate various types of functions such
as copying, scanning and fax. This also displays messages,
such as when paper runs out or paper jams occur.
P.11 “Touch panel” in this manual
4.
Use this if white streaks occur on the copied or printed
paper.
Troubleshooting Guide (PDF): “Chapter 1:
TROUBLESHOOTING FOR THE HARDWARE”
Original glass
Use this to copy three-dimensional originals, book-type
originals and special paper such as OHP film or tracing
paper, as well as plain paper.
Slit glass cleaner
9.
Paper exit stopper
Use this to prevent the exiting paper from falling. Open
this when you make many copies or prints on a larger size
of paper such as A3, B4, LD and LG.
10. Receiving tray
Printed paper exits into this tray. The loading capacity is
approx. 550 sheets (90 g/m2 28 lb. Bond). This may vary
depending on the paper conditions such as the degree of
paper curling.
11. Scanning area
The data of originals transported from the Reversing
Automatic Document Feeder (optional) are scanned here.
P.44 “Regular Cleaning” in this manual
12. Original scale
Use this to check the size of an original placed on the
original glass.
Items marked (optional) are sold separately. In addition to those on P.6 and
P.7, you will find more on other pages.
P.64 “Options” in this manual.
7
Chapter 1 PREPARATIONS
Control panel
Use the buttons on the control panel for various operations and settings in the equipment.
1
2
4
3
5
6
7
8
9
10
11
12
13
14
23
1.
22 21 20
19
18 17
[e-FILING] button
Use this button to access stored image data.
2.
[COPY] button
Use this button to access the copying function.
3.
[MENU] button
Use this button to display frequently used templates.
4.
5.
[USER FUNCTIONS] button
[COUNTER] button
[ENERGY SAVER] button
ON/OFF lamp
MAIN POWER lamp
This red lamp lights when the main power switch is ON.
10. [POWER] button
Use this button to turn the power of the equipment ON or
OFF (shutdown).
8
When this button is pressed, all selected functions are
cleared and returned to the default settings. If the default
setting is changed on the control panel, and then copying,
scanning, Fax or similar is performed, this button blinks.
15. [CLEAR] button
This green lamp lights when the [POWER] button is ON.
9.
12. [FUNCTION CLEAR] button
[INTERRUPT] button
Use this button for the equipment to enter the energy
saving mode.
8.
Use these keys to enter any numbers such as the number
of copies, telephone numbers or passwords.
13. [STOP] button
Use this button to display the counter.
MFP Management Guide (PDF): “Chapter 3: MANAGING
COUNTERS (COUNTER MENU)”
7.
11. Digital keys
Use this button for paper size or media type setting of
drawers, and registration of the copy, scan and FAX
settings including a default setting change.
MFP Management Guide (PDF): “Chapter 1: SETTING
ITEMS (USER)”
MFP Management Guide (PDF): “Chapter 2: SETTING
ITEMS (ADMIN)”
Use this button to interrupt print processing and perform
a copy job. The interrupted job is resumed through your
pressing this button again.
6.
16 15
Use this button to stop any scanning and copying
operations in progress.
14. [START] button
Use this button to start copying, scanning and Fax
operations.
Use this button to correct the numbers keyed in, such as
the number of copy sets.
16. Alarm lamp
This red lamp lights when an error occurs and some action
needs to be taken.
17. PRINT DATA lamp
This green lamp lights during reception of data such as
print data.
18. [ACCESS] button
Use this button when the department code or user
information has been set. If this button is pressed after
copying, etc., the next user needs to enter the department
code or user information.
P.66 “Logging in” in this manual
19. MEMORY RX / LINE lamps
These lamps light in the status of the fax data reception
and fax communication. The equipment can be operated
even while these lamps are lighting.
Description of Each Component
20. [FAX] button
Use this button to access the Fax / Internet Fax function.
21. [PRINT] button
Use this button to access the printing functions such as
private printing, in this equipment.
22. [SCAN] button
Use this button to access the scanning function.
23. Touch panel
Use this panel for the various settings of the copying,
scanning and Fax functions. This also displays messages,
such as when paper runs out or paper jams occur.
1
9
Chapter 1 PREPARATIONS
Adjustment of the angle of the control panel
Adjusting the angle of the control panel
The angle of the control panel is adjustable between 7 and 52
degrees.
When changing the angle of the control panel, be careful not to catch your hands in the gap between the equipment and
the control panel.
This could injure you.
10
Description of Each Component
Touch panel
When the power is turned ON, the basic menu for copying functions is displayed on this touch panel. The status of the
equipment is also displayed on the touch panel with messages and illustrations.
The menu shown at the time of turning the power ON can be changed to one for functions other than copying, for
example, Fax function. Contact your service technician or representative for details.
1
2
6
1
5
4
1.
Function display
The function being used, such as copying or fax, is
displayed.
2.
Date and time
The present date and time are displayed.
5.
[?] (HELP) button
Use this button to view the explanation of each function
or the buttons on the touch panel.
P.47 “Using the Help functions” in this manual
3.
4.
3
Alert message indication area
This shows alert messages such as when the toner
cartridges must be replaced.
6.
[JOB STATUS] button
Message indication area
The explanation of each operation or the current status is
displayed in message form.
This indicates the processing status of copy, fax, scan or
print jobs, and also allows you to view their performance
history.
Message displayed
The following information appears on the touch panel:
• Equipment status
• Operational instructions
• Cautionary messages
• Reproduction ratios
• Number of copy sets
• Paper size and amount of paper remaining in a selected drawer
• Date and time
Touch buttons
Press these buttons on the touch panel lightly to set various functions.
Adjusting the contrast of the touch panel
You can set the contrast of the touch panel in the USER FUNCTIONS menu entered by pressing the [USER FUNCTIONS]
button on the control panel.
MFP Management Guide (PDF): “Chapter 1: SETTING ITEMS (USER)” - “Setting General Functions”
11
Chapter 1 PREPARATIONS
Setting letters
The following menu is displayed when the entry of any letter is required for scanning or e-Filing, etc.
Use the buttons on the touch panel for letter entry.
After entering the letters, press [OK]. The menu will be changed.
The following buttons are used for letter entry.
[Basic]:
Press this to access the basic keys.
[Symbol]:
Press this to access the symbol keys.
[Other]:
Press this to access the special keys.
[Caps Lock]: Press this to switch capital letters and small letters.
[Shift]:
Press this to enter capital letters.
[Space]:
Press this to enter a space.
: Press these to move the cursor.
[Back Space]: Press this to delete the letter before the cursor.
[Clear]:
Press this to delete all letters entered.
[CANCEL]:
[OK]:
12
Press this to cancel the entry of letters.
Press this to fix all entered letters.
Turning Power ON/OFF
Turning Power ON/OFF
This section explains how to turn the power ON and OFF as well as the energy saving mode. How to turn the power ON differs
between when the MAIN POWER lamp (red) on the control panel is lit and when it is not.
Turning the power ON
When the MAIN POWER lamp (red) on the control panel does not light:
1
Open the main power switch cover and turn the power ON
there.
When the MAIN POWER lamp (red) on the control panel lights:
• The equipment starts warming-up. “Wait Warming Up” appears
during warming-up.
• While the equipment is warming up, you can use the auto job
start function. For details, refer to the following guide:
Copying Guide (PDF): “Chapter 2: HOW TO MAKE COPIES” “Making Copies”
Press the [POWER] button.
The equipment will be ready for copying after about 89 seconds for 230 V ES9460 MFP, about 99 seconds for 115 V
CX3535 MFP, and about 160 seconds for ES9470 MFP/CX4545 MFP, and “READY” appears.
When you turn the power of the equipment OFF, be sure also to shut it down by pressing the [POWER] button on the
control panel. Do not simply turn the main power switch OFF. For details, see the following page:
P.14 “Turning the power OFF (Shutdown)” in this manual
When “ERASING DATA” appears
This message appears when the Data Overwrite Enabler (optional) has been installed. It appears immediately after the
power is turned ON or after the equipment has been operated. You can operate the equipment even if it is displayed.
When the equipment is controlled under the department or user management function, enter the department code or user
information first. For details, see the following page:
P.66 “Logging in” in this manual
13
Chapter 1 PREPARATIONS
Turning the power OFF (Shutdown)
When turning the power of the equipment OFF, be sure to shut it down according to the procedure below. Check the
following three points before shutdown.
• No jobs should be left in the print job list.
• None of the PRINT DATA lamp (green) or the MEMORY RX / LINE lamps (green) should be blinking.
(If the equipment is shut down while any of the above lamps is blinking, jobs in progress such as FAX reception will be
aborted.)
• No computer should access the equipment via the network, such as TopAccess.
• When the ON/OFF lamp (green) lights on the control panel, do not simply press the main power switch to turn the power OFF. The
stored data may be lost or the hard disk may be damaged.
• If a job in process exists when the [POWER] button of the control panel is pressed, “Processing job will be deleted. Are you sure you
want to shutdown?” appears.
• The power of this equipment is automatically turned ON when print data or fax data are received or when the time set for “Scheduled
Print” has come during the Super Sleep mode.
“Shutdown is in progress.” appears for a while, and then the
power is turned OFF.
Press the [POWER] button until a “pip” sound is
heard.
When the equipment is not used for a long period of time:
When the power is turned OFF with the main power switch, the
MAIN POWER lamp (red) will go out.
Press the [POWER] button on the control panel to
shut down the equipment, check that the ON/OFF
lamp (green) is not lit and then turn the power OFF
with the main power switch.
14
Description of Each Component
Saving energy when not in use – energy saving modes –
This equipment supports three energy saving modes; the Automatic Energy Save mode, Sleep mode and Super Sleep
mode. The table below shows the procedures to switch modes manually and the conditions under which the equipment
enters into or recovers from each mode.
Energy saving
modes
Automatic
Energy Save
mode
Sleep mode
Super Sleep
mode
*1
*2
*3
*4
*5
*6
*7
Procedure to switch
modes
When a specified period of
time *1 has passed since the
last use of the equipment.
When the [ENERGY SAVER]
button *3 is pressed or
when a specified period of
time *4 has passed since the
last use of the equipment.
When the [ENERGY SAVER]
button *3 or the [POWER]
button *7 is pressed or
when a specified period of
time *4 has passed since the
last use of the equipment.
Conditions to enter into
the mode
—
Status of equipment
“Saving energy - press
START button.” appears on
the touch panel.
When a particular option *5
is installed or when a
particular protocol *6 is
enabled.
The touch panel display
goes off and the [ENERGY
SAVER] button lights in
green.
When a particular option *5
is not installed and also
when a particular protocol
*6
is disabled.
Only the MAIN POWER
lamp (red) lights.
Conditions to recover
from the mode
When a button on the
control panel *2 is pressed
or when print data or fax
data are received.
Same as the Automatic
Energy Save mode.
1
When the [POWER] button
is pressed, when print or
fax data are received
through a wired LAN or
when the time set for
Scheduled Print has come.
The default value set at the factory shipment is 1 minute.
Any of the [START], [ENERGY SAVER], [COPY], [e-FILING], [SCAN], [PRINT] and [FAX] buttons.
[ENERGY SAVER] button on the control panel.
The default value set at the factory shipment is 1 minute (The default value set at the factory shipment of the European version is 10 minutes).
Any of the Wireless LAN Module, Bluetooth Module and e-BRIDGE ID Gate.
Any of IPX, AppleTalk and other protocols. When the IPsec function is enabled, the equipment enters into the Sleep mode. For details, refer to the
following guide:
TopAccess Guide (PDF): “Chapter 8: [Administration] Tab Page” - “[Setup] Item list”
Even if you press the [Power] button, the equipment may not enter into the Super Sleep mode and the power may be turned OFF, depending on the
state of the equipment. For the conditions under which the equipment enters into the Super Sleep mode, refer to the following guide:
TopAccess Guide (PDF): “Chapter 8: [Administration] Tab Page” - “[Setup] Item list”
For changing the set period of time for entering into each mode, refer to the following guide:
MFP Management Guide (PDF): “Chapter 2: SETTING ITEMS (ADMIN)” - “Setting General Functions”
For the European version
Contact your service representative to change the default settings noted above.
When the set period of time for switching to the Automatic Energy Save mode is the same as that for the Sleep mode or
the Super Sleep mode, the equipment enters into the Sleep mode or the Super Sleep mode after the set period of time.
15
Chapter 1 PREPARATIONS
Placing Paper and Originals
This section explains how to set paper and originals. Incorrect setting causes image skews or paper jams. Follow the
procedure below.
Placing paper
1
4
2
1
Pull out the drawer and set the end guide so that
it matches the paper size.
2
Push in the drawer.
1
Be careful not to catch your fingers when pushing the
drawer back.
3
3
2
This could injure you.
Be sure that the height of the stacked paper does not exceed
the MAX line indicated on the side guides.
Release the lock and set the side guides so that
they match the paper size.
3
2
1
Place paper in the drawer, and lock the side
guides.
16
• For paper available for the equipment, see the following
page:
P.69 “Specifications of Equipment” in this manual
• Paper can be placed in the Paper Feed Pedestal (optional)
and the Additional Drawer Module (optional) following the
above procedure. For placing paper in the Large Capacity
Feeder (optional), refer to the following guide:
Copying Guide (PDF): “Chapter 1: BEFORE USING
EQUIPMENT” - “Placing Paper”
Description of Each Component
Placing originals
Original glass
1
Reversing Automatic Document
Feeder (optional)
1
1
Raise the Original Cover (optional) or the
Reversing Automatic Document Feeder (optional).
2
Place the original with its face down on the
original glass and align it against the left rear
corner.
3
Place the originals face up on the original feeder
tray.
2
Align the side guides to the original length.
When placing mixed-size originals on the Reversing
Automatic Document Feeder (optional), adjust its side guides
to the widest original, and then align the originals against the
guide on the front side.
A4-R
(LT-R)
B4
(LD)
Lower the Original Cover (optional) or the
Reversing Automatic Document Feeder (optional)
carefully.
Do not place any heavy objects (4 kg (9 lb.) or over) on
the original glass and do not press on it with force.
Breaking the glass could injure you.
17
Chapter 1 PREPARATIONS
Installing Client Software
How to install the client software such as the printer driver from the Client Utilities CD-ROM co-packed with the equipment is
described as follows.
Recommended installation
The recommended client software such as the printer driver can be installed all in one go.
1
Turn the power ON and confirm that “READY” appears on the touch panel.
2
Insert the Client Utilities CD-ROM in the CD-ROM drive of a Windows computer.
P.13 “Turning Power ON/OFF” in this manual
• To install the client software, log onto Windows with a user account which enables the installation such as
“Administrators”.
• For using Firewall software, refer to the following Guide.
Software Installation Guide (PDF): “1.OVERVIEW Precautions for Using Firewall Software”
3
Select [I agree to the terms of the License Agreement.] and click [Next].
4
Click [Recommended].
5
Click [Install].
6
A list for the discovered printers is displayed. Then 1 select this equipment on the list and
2 click [OK].
1
2
18
Description of Each Component
7
When the installation is completed, click [Finish].
• For details of the Client Utilities CD-ROM, see the following
page.
P.61 “Client Utilities CD-ROM“ in this manual
• For details of the recommended installation, refer to the
following guide.
Software Installation Guide (PDF): “Chapter 2:
RECOMMENDED INSTALLATION”
8
1
Click [Exit] and then [Yes] to finish the installation.
Setting the printer driver
Before using the printer driver, you must configure the options installed in the equipment.
1
Select [Devices and Printers] in the [Start] menu.
2
Select OKI PCL Printer, right-click and then click [Printer Properties].
3
The configuration data of the options can be obtained automatically by opening the
[Device Settings] tab menu.
4
Click [OK]. The setting is completed.
19
Chapter 1 PREPARATIONS
20
Chapter
2
BASIC OPERATION
Basic Copying Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Basic Fax Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Basic Scanning Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Basic e-Filing Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Basic Printing Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Basic Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Chapter 2 BASIC OPERATION
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying, are as
follows.
Making copies
Press the [COPY] button on the control panel.
Place the original(s).
Select the copy modes as required.
P.17 “Placing originals” in this manual
You can switch the color mode. There are 3 color modes as
shown below.
FULL COLOR: All originals are copied in full color. (Default)
BLACK:
All originals are copied in black and white.
AUTO COLOR: The equipment automatically judges the
type of each color on originals. Colored
originals are copied in full color and blackand-white originals are copied in black and
white.
1 Key in the desired number of copies, and then 2 press the [START] button on the
control panel. Copying starts.
1
2
22
• To stop copying, press the [STOP] button on the control
panel and then [MEMORY CLEAR] on the touch panel.
• Printed paper exits to the exit tray of the equipment or the
Finisher (optional). The tray to which the paper exits is
indicated by the arrow on the touch panel.
Basic Copying Operation
Enlargement and reduction
copying
Selecting finishing mode
(sorting)
Press [ZOOM].
1 Select the desired paper size, 2
press [AMS], and then 3 [OK].
2
1
Press [FINISHING].
When you use the Reversing Automatic Document
Feeder (optional), the sorting mode is automatically
set.
2
1 Press [SORT] and then 2 [OK].
1
3
2
Align the originals according to the desired paper
size and direction. The size of the originals will be
automatically determined.
When copying a set of originals whose sizes and
directions are different, press [MIXED SIZE].
• To set the staple and the hole punch mode, the
optional finishing devices are needed. For the
necessary options, see the following page.
P.64 “Options” in this manual
• For example, when “Original 1”, “Original 2” and
“Original 3” are copied in 2 sets, they can be made
as follows.
1
2
1
3
2
1
3
2
3
1
2
1
3
1
2
2
3
3
23
Chapter 2 BASIC OPERATION
Setting duplex copy
Setting original mode
Press [2-SIDED].
1 Select the desired duplex mode and
then 2 press [OK].
Press [ORIGINAL MODE].
1 Select the desired original mode
and then 2 press [OK].
1
1
2
2
You can choose from 5 types.
For example, the following settings can be made.
1-sided original to 2-sided copy:
2-sided original to 2-sided copy:
24
The selectable original mode differs depending on
the color mode. In the full color mode, you can
choose from 5 types.
For example, the following settings can be made.
Originals with text and
photographs mixed:
Basic Copying Operation
Density adjustment
You can manually adjust the density by
or .
pressing either
To lighten the density, press
, to darken it, press
.
Bypass copying
Place paper face down on the bypass
tray.
1 Press the button corresponding to
the size of paper set on the bypass tray
and then 2 [OK].
2
Press [AUTO] to adjust the density
automatically.
1
2
Press [PAPER TYPE] if the type of the paper you
placed on the bypass tray is other than plain paper.
The automatic density adjustment is set by default.
Press the [START] button. Bypass
copying starts.
25
Chapter 2 BASIC OPERATION
Basic Fax Operation
The basic procedures for sending a fax (the FAX Unit is optional), such as specifying fax numbers in the address book or setting
the transmission conditions, are as follows.
Sending a fax
Press the [FAX] button on the control panel.
Place the original(s).
P.17 “Placing originals” in this manual
Key in the fax number of the recipient by pressing [INPUT FAX No.] on the touch panel or
the digital keys on the control panel.
If you make a mistake when entering a fax number,
press [BACK SPACE] on the touch panel to delete them
one by one.
Or press the [CLEAR] button on the control panel or
[CLEAR] on the touch panel to delete all the numbers
you entered.
Press [SEND] on the touch panel. The fax starts being sent.
Alternatively, you can press the [START] button on the
control panel to send a fax.
26
Basic Fax Operation
Specifying recipients in the
address book
Specifying recipients one by one
Confirming recipients
Press [DESTINATION].
The recipient list screen is displayed.
1 Press the [SINGLE] tab to display the list of
addresses, and then 2 the recipient’s fax
icon.
1
2
2
Specifying recipients in groups
1 Press [GROUP] tab to display the list of the
groups, and then 2 the group name.
2
Select the recipient you want to delete, and then
press [DELETE].
1
• You can specify up to a total of 400 recipients (single
and group).
• To cancel a selected recipient, press it again.
27
Chapter 2 BASIC OPERATION
Setting the transmission
conditions
Press [OPTION].
The transmission condition setting
screen is displayed. Press or to
switch the pages.
Canceling reserved
transmissions
Press [JOB STATUS].
1 Press [FAX], 2 select the reserved
transmission you want to delete, and
then 3 press [DELETE].
1
2
3
RESOLUTION: Set the resolution based on the
fineness of the original.
ORIGINAL SIZE: Set the scan size of the original.
28
After each item is set, press [OK].
Press [DELETE] on the confirmation
screen. The reserved transmission is
deleted.
Basic Fax Operation
Checking communication
status (log)
Registering recipients
Press [JOB STATUS].
1 Select the [LOG] tab and then 2
press [SEND].
Press the [USER FUNCTIONS] button on
the control panel and then [ADDRESS]
on the touch panel.
1 Press an open button to create a
new recipient and then 2 [ENTRY].
2
1
2
1
Press [RECEIVE] to check the fax reception log.
The communication status list is
displayed. If [OK] is indicated in the
“Status”, the transmission succeeded.
2
1 Press each button on the touch
panel to enter the following recipient
information, and then 2 [OK] to
register it.
1
2
To register recipients in the address book from the
send/receive log screen, select the record in the
send or receive log, and then press [ENTRY].
29
Chapter 2 BASIC OPERATION
Basic Scanning Operation
How to store the scanned data in a shared folder and store these data in a Windows computer is described as follows.
Storing the scanned data in a shared folder
Press the [SCAN] button on the control
panel.
Place the original(s).
Press [FILE] on the touch panel.
P.17 “Placing originals” in this manual
1 Set [FILE NAME], 2 FILE FORMAT,
etc. and then 3 press [OK].
2
1
30
3
5
Change the scan settings as required.
6
Press [SCAN] on the touch panel.
Scanning starts.
Basic Scanning Operation
To store the scanned data of a shared folder in a Windows
computer
Start up Windows Explorer.
Enter the name of the shared folder, in which the IP address of the equipment and the
scanned data are stored, in the address bar with the following format, and then press the
[Enter] button.
Format: \\[IP address of the equipment] \file_share
e.g.) When the IP address of the equipment is 172.16.16.110, enter
\\172.16.16.110\file_share in the address bar of Windows Explorer.
2
• For the IP address of the equipment, ask your network administrator.
• It is convenient to make a shortcut of the “file_share” folder, since step 2 can be
omitted.
Store the scanned data in a Windows computer.
The scanned data stored in the shared folder will be automatically deleted in 30 days by default.
Be sure to store them in a Windows computer before that.
31
Chapter 2 BASIC OPERATION
Basic e-Filing Operation
e-Filing is a function to store documents in the hard disk of the equipment, they can then be printed as required.
Storing documents
The originals are stored as e-Filing documents in the equipment.
Press the [COPY] button on the control
panel.
1 Specify the box to be stored and the
document name, and then 2 press
[OK].
1
2
Place the original(s).
P.17 “Placing originals” in this manual
1 Press [STORAGE] and then 2
[STORE TO E-FILING] on the touch
panel.
When “Print this document?” appears, press [YES] if
you want to do this as well as store it.
5
Press the [START] button on the control
panel to store the documents.
1
2
You can store documents not only by copying them but also by scanning them or using the printer driver. For details, refer to the
following guides:
Scanning Guide (PDF): “Chapter 2: BASIC OPERATION” - “Scan to e-Filing”
Printing Guide (PDF): “Chapter 2: PRINTING FROM WINDOWS” - “Printing with the Best Functions for Your Needs”
32
Basic e-Filing Operation
Printing Documents
The procedure for printing documents stored in e-Filing is as follows.
Press the [e-FILING] button on the control panel.
Select the box on the touch panel that contains the document you want to print.
2
1 Select the document you want to print, and then 2 press [PRINT]. Printing starts.
1
2
Selected documents can be previewed in thumbnailed form.
Selected documents can be deleted from e-Filing.
This enables you to make print settings, such as selecting the duplex printing mode or adding page
numbers.
Specified pages of the document can be printed for confirmation.
33
Chapter 2 BASIC OPERATION
Basic Printing Operation
The basic operations of the printer are as follows. This is for printing from a Windows computer with a PCL Printer Driver
which needs to be installed in advance.
Select [Print] in the [File] menu of the application.
1 Select the printer driver of the equipment, and then 2 click [Preferences] ([Properties]).
1
2
Set the print options as required and click [OK].
Click [Print] ([OK]). Printing starts.
To install the printer driver in a Windows computer, refer to
the following guide:
P.18 “Installing Client Software” in this manual
Software Installation Guide (PDF): “Chapter 3:
INSTALLING PRINTER DRIVERS FOR WINDOWS”
To install the printer driver in a Macintosh computer, refer to
the following guide:
Software Installation Guide (PDF): “Chapter 4:
INSTALLING PRINTER DRIVERS FOR MACINTOSH”
34
Basic Printing Operation
Setting PCL Printer Driver
To specify paper size or number of copy sets
Click the [Basic] tab in the property dialog box of the printer driver.
2
To specify 2-sided printing or N-up printing
Click the [Finishing] tab in the property dialog box of the printer driver. If the Finisher (optional) is installed,
“Staple” or “Hole Punch” can be selected.
Select “NUMBER OF PAGES PER SHEET”
to print several pages on one sheet.
The pages are reduced to fit the
selected paper size automatically and
printed.
To specify Front cover printing
Click the [Paper Handling] tab in the property dialog box of the printer driver.
To adjust Image Quality
Click the [Image Quality] tab in the property dialog box of the printer driver.
To print with character strings or graphics on the background of the paper
Click the [Effect] tab in the property dialog box of the printer driver.
To set not to print blank pages
Click the [Others] tab in the property dialog box of the printer driver.
To print with templates
Click the [Templates] tab in the property dialog box of the printer driver.
35
Chapter 2 BASIC OPERATION
Basic Menu Operation
Press the [MENU] button on the control panel to use templates and check the print counter.
When the user management function is enabled, log in and press the [MENU] button on the control panel. The menu
screen for a logged in user is displayed.
You can register frequently used templates, a group of templates or the shortcut of the External Interface Enabler
(GS-1020, optional). Registration or deletion of the shortcut can also be enabled in the TopAccess mode. For details, refer
to the following guide:
TopAccess Guide (PDF): “Chapter 9: [My Account] Tab Page”
1
2
7
6
5
4
1.
User name display area
3
5.
The name of the user logging in is displayed.
2.
3.
The shortcut which a user logging in can employ is
displayed.
[EXTENSION] button
This is enabled when the External Interface Enabler
(GS-1020, optional) is installed. Contact your service
technician or representative for details.
Role Information Displayed Area
[USER] button
6.
[PUBLIC] button
The shortcut which all users can employ is displayed.
7.
Shortcut display area
The shortcut registered in the menu screen is displayed.
Available role information for a user who has logged in is
displayed.
4.
Total print counter
The total print counter of the user logging in is displayed.
Available printing numbers are displayed depending on
the settings of the equipment.
According to the authority for each user, the mark or appears on the icons in the role information displayed area.
The functions with the mark cannot be used. Some of the functions with the mark cannot be used.
• You can create a template with several functions that are frequently used so that they can be employed whenever you want, thus
eliminating the need to perform complicated settings every time. Templates can be used in copying, scanning and sending a fax. For
details, refer to the following guides:
Copying Guide (PDF): “Chapter 6: TEMPLATES”
TopAccess Guide (PDF): “Chapter 5: [Registration] Tab Page” - “[Registration] Tab Page Overview”
• When the user management functions is not used, the public template group and the total print counter are displayed.
• [USER] and [PUBLIC] are displayed when the user management function is enabled.
36
Chapter
3
MAINTENANCE /
TROUBLESHOOTING
Replacing Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replacing Waste Toner Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Replacing Staple Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Regular Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 3 MAINTENANCE / TROUBLESHOOTING
Replacing Toner Cartridge
When “Install new *** toner cartridge” appears on the touch panel, replace the toner cartridge according to the following
procedures.
1
4
2
1
Open the front cover.
2
Y
Pull out the seal. Then remove the seal on the
toner cartridge board.
M
1
C
K
5
Y
2
Remove the color toner cartridge you want to
replace.
Install the new toner cartridge.
3
6
10
Shake the new toner cartridge well to loosen the
toner inside.
Close the front cover.
Never attempt to incinerate toner cartridges.
Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.
38
M
C
K
Replacing Waste Toner Box
Replacing Waste Toner Box
When “Dispose of used toner” appears on the touch panel, replace the waste toner box according to the following procedures.
1
4
Open the waste toner box cover.
Holding the upper section, remove the waste
toner box.
2
5
3
Pull out the waste toner box until the opening
appears.
Set a new waste toner box.
3
6
2
1
Screw the lid on the opening of the waste toner
box.
Close the waste toner box cover.
Never attempt to incinerate waste toner boxes.
Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.
39
Chapter 3 MAINTENANCE / TROUBLESHOOTING
Replacing Staple Cartridge
When “Check staple cartridge” appears on the touch panel, replace the staple cartridge according to the following procedures.
Stapler Unit of Finisher (MJ-1101)
40
1
4
Open the front cover of the Finisher.
Install a new staple case into the staple cartridge.
2
5
Take off the staple cartridge.
Install the staple cartridge.
3
6
Take the empty staple case out of the staple
cartridge.
Close the front cover of the Finisher.
Replacing Staple Cartridge
Stapler Unit of Saddle Stitch Finisher (MJ-1106)
1
4
Open the front cover of the Finisher.
Install a new staple case into the staple cartridge.
2
5
3
Take off the staple cartridge.
Install the staple cartridge.
3
6
Take the empty staple case out of the staple
cartridge.
Close the front cover of the Finisher.
41
Chapter 3 MAINTENANCE / TROUBLESHOOTING
Saddle Stitch Unit of Saddle Stitch Finisher (MJ-1106)
1
4
2
3
1
2
1
Open the front cover of the Finisher, and then pull
out the saddle stitch unit.
Install a new staple case into the staple cartridge
and remove the seal bundling the staples.
2
5
1
1
2
2
2
2
1
1
Take out two empty staple cartridges.
Install two new staple cartridges.
3
6
2
1
2
3
1
Take the empty staple case out of the staple
cartridge.
42
1
Insert the saddle stitch unit into the Finisher, and
then close the front cover of the Finisher.
Replacing Staple Cartridge
Stapler Unit of Hanging Finisher (MJ-1031)
1
4
1
1
2
3
2
2
Push the lever to separate the Hanging Finisher
from the equipment, and then open the cover.
Press down the transparent cover and pull out the
seal.
2
5
3
1
2
2
4
3
Take off the staple cartridge, and then take the
empty staple case out of the staple cartridge.
Install the staple cartridge.
3
6
1
2
2
Install a new staple case into the staple cartridge.
Close the Finisher cover, and then install the
Hanging Finisher to the equipment.
Be careful not to catch your fingers between the equipment and the Finisher (optional).
This could injure you.
43
Chapter 3 MAINTENANCE / TROUBLESHOOTING
Regular Cleaning
Poor quality printing such as uneven and soiled images can be improved by simple cleaning. This section describes the
cleaning methods for the equipment.
Cleaning for the scanning area, original glass, guide and platen sheet
We recommend you to clean the following items weekly, so that the originals can be scanned in unsoiled conditions. Be
careful not to scratch the parts that you are cleaning.
• Be careful not to scratch the portions in cleaning.
• When cleaning the surface of the equipment, do not use such organic solvents as thinner or benzine.
- This could warp the shape of the surface or leave it discolored.
• When using a chemical cleaning pad to clean it, follow the instruction.
2
4
3
1
1.
Scanning area (surface of the long rectangular glass) / 2. Original glass
Wipe it with a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft cloth which has been moistened
with water and then squeezed well.
Do not use liquids other than water (such as alcohol, organic solvents or neutral detergent).
3.
Guide / 4. Platen sheet
Clean the surface as follows depending on the staining.
• Clean it with a soft cloth.
• Clean it with a soft cloth lightly moistened with water.
• Clean it with a soft cloth lightly moistened with alcohol, and then wipe it with a dry cloth.
• Clean it with a soft cloth lightly moistened with watered-down neutral detergent, and then wipe it with a dry cloth.
44
Troubleshooting
Troubleshooting
When problems such as paper jams occur, see the following explanation or refer to the Troubleshooting Guide (PDF)
according to P.45 “References to the Troubleshooting Guide” in this manual.
About Troubleshooting Guide
The Troubleshooting Guide (PDF) describes the causes and the troubleshooting of problems when you use the
equipment.
References to the Troubleshooting Guide
Chapter
Title
Section
When This Screen Is Displayed
Messages Displayed on the Touch Panel
Clearing a Paper Jam
Clearing a Staple Jam
Chapter 1
TROUBLESHOOTING FOR THE HARDWARE
Replacing a Toner Cartridge
Replacing the Waste Toner Box
Refilling With Staples
Cleaning the Slit Glass and Main Chargers
Cleaning the Hole Punch Dust Bin
Chapter 2
TROUBLESHOOTING FOR COPYING
Copying Problems
Print Job Problems
Printer Driver Problems
Chapter 3
TROUBLESHOOTING FOR PRINTING
Network Connection Problems
3
Client Problems
Hardware Problems
Chapter 4
TROUBLESHOOTING FOR SCANNING
Chapter 5
TROUBLESHOOTING FOR e-Filing
Scanning Problems
e-Filing Web Utility Problems
Locating the Equipment in the Network
LDAP Search and Authentication Problems
Chapter 6
TROUBLESHOOTING FOR NETWORK
CONNECTIONS
Printing Problems (Network Related)
Fax Driver Problems
Client Software Authentication Problems
Hardware Status Icons on TopAccess [Device] Tab
Chapter 7
CHECKING THE EQUIPMENT STATUS WITH
TopAccess
Error Messages
Error Codes
Chapter 8
WHEN SOMETHING IS WRONG WITH THE
EQUIPMENT
When You Think Something Is Wrong With the Equipment
Regular Maintenance
Error codes
Press [JOB STATUS] and then the [LOG] tab on the touch
panel; the LOG menu is displayed. The job history and
error codes are displayed in the LOG menu.
For details of the error codes, refer to the following guide:
Troubleshooting Guide (PDF): “Chapter 7: CHECKING
THE EQUIPMENT STATUS WITH TopAccess” - “Error Codes”
45
Chapter 3 MAINTENANCE / TROUBLESHOOTING
Symbols and messages appear on the touch panel
Symbols or messages of such as for paper jams occasionally
appear on the touch panel.
For details of the paper jam symbols, refer to the following
guide:
Troubleshooting Guide (PDF): “Chapter 1:
TROUBLESHOOTING FOR THE HARDWARE” - “Clearing a
Paper Jam”
For details of the messages on the touch panel, refer to the
following guide:
Troubleshooting Guide (PDF): “Chapter 1:
TROUBLESHOOTING FOR THE HARDWARE” - “Messages
Displayed on the Touch Panel”
When paper jams occur
When paper jams occur, refer to the guidance displayed on the touch panel of the equipment or refer to the following
guide:
Troubleshooting Guide (PDF): “Chapter 1: TROUBLESHOOTING FOR THE HARDWARE” - “Clearing a Paper Jam”
Covers of the equipment and the options
The covers of the equipment and the options to be opened when paper jams occur are as indicated by the arrows in the
following illustrations.
MR-3022
KD-1027
KD-1028
46
Troubleshooting
Covers of the Finisher, the Hole Punch Unit and the Bridge Unit (all optional)
The covers of the Finisher, Hole Punch Unit and Bridge Unit to be opened when paper jams occur are as indicated by the
arrows in the following illustrations.
The Finisher (MJ-1101), the Hole Punch Unit (MJ-6103) and the Bridge Unit (KN-4530)
The Saddle Stitch Finisher (MJ-1106), the Hole Punch Unit (MJ-6103) and the Bridge Unit (KN-4530)
3
Using the Help functions
If you press
on the upper right of the touch panel,
explanations of the functions and buttons on the screen
are displayed.
If you press
on the lower left of the Help menu,
supplementary information about the functions appears.
47
Chapter
4
ADVANCED
FUNCTIONS
Advanced Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter 4 ADVANCED FUNCTIONS
Advanced Functions
In Chapter 2 in this manual, the basic functions are described. This section describes the advanced functions to help you get
the best out of your equipment.
Examples of the advanced functions describing in this section
Copying different-sized originals and
stapling copies
(LT)
(LD)
Attaching the scanned data to an Email
(LT) (LD)
P.51 in this manual
P.55 in this manual
Copying or scanning originals without
blank sheets
Adding date and time to document
files
1
5
3
1
3
6
5
6
2011 . 5 . 10 11:11
P.52 in this manual
P.56 in this manual
Storing data in a shared folder as well
as sending a fax
Printing a PDF file stored in the USB
device
P.53 in this manual
P.57 in this manual
Registering frequently used scan
settings in templates
Printing only allowed data set on the
control panel
1
P.54 in this manual
50
P.58 in this manual
Advanced Functions
COPY
FAX
SCAN
e-FILING
PRINT
Copying different-sized originals and stapling copies
(LT)
1
(LT) (LD)
(LD)
Place the originals on the Reversing
Automatic Document Feeder.
5
P.17 “Placing originals” in this manual
The procedure of how to copy 5 sets of
different-sized originals (A4 or LT: 1
sheet, A3 or LD: 4 sheets) and staple
the copies is as follows. The Reversing
Automatic Document Feeder and the
Finisher (optional) are required.
1 Press [FRONT STAPLE] and then 2
[OK] on the touch panel.
1
If you want to copy different-sized originals and
staple the copies, select only those having the same
width.
2
2
3
Press [ZOOM] on the touch panel.
1 Press [MIXED SIZE] and then 2 [OK]
on the touch panel.
1
4
2
6
Key in 5 for the number of copy sets,
and then press the [START] button on
the control panel.
4
Press [FINISHING] on the touch panel.
51
Chapter 4 ADVANCED FUNCTIONS
COPY
FAX
SCAN
e-FILING
PRINT
Copying or scanning originals without blank sheets
You can copy or scan originals omitting
blank sheets while maintaining the
original page sequence.
1
5
3
1
3
6
5
6
When copying
1
Place the originals.
2
Press the [EDIT] tab, and then
in the
basic menu for the copying functions.
3
Press [OMIT BLANK PAGE] and then
[OK].
P.17 “Placing originals” in this manual
When scanning
1
Place the originals.
2
Press [SCAN SETTING], and then
the basic menu for the scanning
functions.
3
Press 1 [ON] in the “OMIT BLANK PAGE”
setting and then 2 [OK].
P.17 “Placing originals” in this manual
in
1
2
4
52
Press the [START] button on the control
panel. Copying starts.
4
In the basic menu for the scanning
functions, specify details such as the
destination for saving the data.
5
Press [SCAN] on the touch panel.
Scanning starts.
Advanced Functions
COPY
FAX
SCAN
e-FILING
PRINT
Storing data in a shared folder as well as sending a fax
You can store documents in a shared
folder in the equipment or in a
computer connected to the network as
well as sending a fax.
1
Place the original(s).
2
Press [STORAGE] on the touch panel.
3
1 Specify details such as the file name, shared folder and file format and then 2 press
[OK].
P.17 “Placing originals” in this manual
1
4
4
2
Specify the recipient and press [SEND]. Sending a fax starts.
53
Chapter 4 ADVANCED FUNCTIONS
COPY
FAX
SCAN
e-FILING
PRINT
Registering frequently used scan settings in templates
If you register frequently used scan
settings in templates, you can easily
perform scan operations only by
recalling the templates. How to
register scan settings (scan data are
stored in PDF format in a shared folder)
in templates (PUBLIC TEMPLATE
GROUP) is described here.
1
Press [FILE] on the touch panel.
6
Press [PASSWORD], enter the
administrator password and press [OK].
2
1 Select “PDF” in the file format, and
then 2 press [OK].
7
1 Select an empty template button,
and then 2 press [SAVE].
1
1
2
2
3
Change the scan setting as required.
4
Press [TEMPLATE] on the touch panel,
and then [REGISTRATION] tab.
5
1 Press [PUBLIC TEMPLATE GROUP] on
the touch panel, and then 2 [OPEN].
8
1 Make the settings such as the
template name, and then 2 press
[SAVE] to complete the registration.
1
1
54
2
2
Advanced Functions
COPY
FAX
SCAN
e-FILING
PRINT
Attaching the scanned data to an E-mail
The procedure for attaching the
scanned data to an E-mail and sending
it to the specified E-mail address is as
follows.
1
Place the original(s).
2
Press [E-MAIL] and then [TO] on the touch panel.
3
1 Specify the E-mail address and then 2 press [OK].
P.17 “Placing originals” in this manual
1
2
4
Define the settings for the file as required and then press [OK].
5
Press [SCAN] on the touch panel. Scanning starts.
4
55
Chapter 4 ADVANCED FUNCTIONS
COPY
FAX
SCAN
e-FILING
PRINT
Adding date and time to document files
The procedure for printing a document
file stored in e-Filing with the date and
time added at the bottom is as follows.
2011 . 5 . 10 11:11
1
Select the box in which the desired document is stored.
2
1 Select the document and then 2 press [SETTINGS].
1
2
3
Press [TIME STAMP].
4
1 Press [LOWER] and then 2 [OK].
1
2
5
56
Press [PRINT] on the touch panel. Printing starts.
Advanced Functions
COPY
FAX
SCAN
e-FILING
PRINT
Printing a PDF file stored in the USB device
The procedure for printing 1 set of a
PDF file stored in the USB device is as
follows.
1
Connect the USB device to the USB port.
2
Press the [PRINT] button on the control panel.
3
Click the pull-down menu, and then select [USB].
4
1 Select a PDF file to be printed and 2 press [PRINT]. Printing starts.
4
1
2
• Press [SETTINGS], then you can set such as
duplex printing and stapling.
• The following types of files are also available
for printing:
- JPEG file
- PRN file
- PS file
- XPS file
57
Chapter 4 ADVANCED FUNCTIONS
COPY
FAX
SCAN
e-FILING
PRINT
Printing only allowed data set on the control panel
The procedure for printing only
allowed data set on the control panel is
as follows. This will stop you from
forgetting to remove printed sheets.
1
1
2
3
Open a file to be printed on a Windows
computer, and then select [Print] from
the file menu of the application.
Select the printer driver of the
equipment, and then click [Preferences]
([Properties]).
6
Click the pull-down menu, and then
select [HOLD].
7
Select the user name, and then press
[OK].
8
1 Select the file to be printed and 2
press [PRINT]. Printing starts.
Select “Hold Print” for the job type in
the [Basic] tab menu.
1
2
58
4
Click [OK] to return to the print dialog
box and click [Print] ([OK]).
5
Press the [PRINT] button on the control
panel of the equipment.
Chapter
5
INFORMATION
ABOUT EQUIPMENT
Items Included in This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Client Utilities CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Logging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Specifications of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Specifications of Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Chapter 5 INFORMATION ABOUT EQUIPMENT
Items Included in This Product
The following items are co-packed with the equipment. Check that you have them all. Contact your service technician or
representative if any are missing or damaged.
Items included in this product
Safety Information
Quick Start Guide (This manual)
Client Utilities CD-ROM
User Documentation CD-ROM
60
The Safety Information describes the necessary precautions for use. For your added
security, be sure to read this booklet first.
The Quick Start Guide describes the preparations, basic and advanced usage,
maintenance and regular cleaning of the equipment.
The Client Utilities CD-ROM contains the client software such as the printer drivers and
the utility software. For details, see the following page:
P.61 “Client Utilities CD-ROM” in this manual
The User Documentation CD-ROM contains pdf files of the Operator’s Manuals such as
the Copying Guide and the Troubleshooting Guide.
Client Utilities CD-ROM
Client Utilities CD-ROM
The Client Utilities CD-ROM contains the following client software such as the printer drivers and the utility software.
Client software
For Windows
For Macintosh
For UNIX/Linux
Client Software Installer
PCL Printer Driver
PS printer driver
XPS printer driver
TWAIN driver
File downloader
Fax driver
AddressBook Viewer
Remote Scan driver
WIA driver
e-Filing Backup/Restore Utility
PPD file for Mac OS X 10.2.4 to Mac OS X 10.3.x
PPD file for Mac OS X 10.4 to Mac OS X 10.7.x
Plug-in for Mac OS X 10.4 to Mac OS X 10.7.x
UNIX/Linux filter (Solaris, HP-U, AIX, Linux, SCO)
CUPS
For installing the client software, refer to the following guide:
Software Installation Guide (PDF): “Chapter 1: OVERVIEW”
For details of the client software, see the following page:
P.62 “Client Software” in this manual
5
61
Chapter 5 INFORMATION ABOUT EQUIPMENT
Client Software
This section describes the outlines of the client software of the equipment. It is necessary to install software except e-Filing
Web utility and TopAccess in the computer before it is used.
Client software for the printing functions
PCL printer driver
PS printer driver
XPS printer driver
PPD file for Macintosh
UNIX/Linux filter
CUPS
This PCL Printer Driver is installed with the Recommended Installation. This driver is generally used.
For details, refer to the following guides:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 3:
INSTALLING PRINTER DRIVERS FOR WINDOWS”
P.34 “Basic Printing Operation” in this manual
Printing Guide (PDF): “Chapter 2: PRINTING FROM WINDOWS”
This driver enables you to print documents in the high quality mode with applications such as
Adobe Systems Incorporated. For details, refer to the following guides:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 3:
INSTALLING PRINTER DRIVERS FOR WINDOWS”
Printing Guide (PDF): “Chapter 2: PRINTING FROM WINDOWS”
This printer driver enables you to print documents from the WPF applications created for Windows
Vista or Windows 7. For details, refer to the following guides:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 3:
INSTALLING PRINTER DRIVERS FOR WINDOWS”
Printing Guide (PDF): “Chapter 2: PRINTING FROM WINDOWS”
This printer driver enables you to print documents from Macintosh computers (Mac OS X 10.2.4 to
Mac OS X 10.7.x). For details, refer to the following guides:
Software Installation Guide (PDF): “Chapter 4: INSTALLING PRINTER DRIVERS FOR MACINTOSH”
Printing Guide (PDF): “Chapter 3: PRINTING FROM MACINTOSH”
UNIX/Linux filter enables you to print documents from the UNIX/Linux workstation. For details, refer
to the following guides:
Software Installation Guide (PDF): “Chapter 5: INSTALLING PRINTER DRIVERS FOR UNIX/Linux”
Printing Guide (PDF): “Chapter 4: PRINTING FROM UNIX/Linux”
CUPS file enables you to set up the CUPS print system from UNIX/Linux workstation. For details, refer
to the following guide:
Software Installation Guide (PDF): “Chapter 5: INSTALLING PRINTER DRIVERS FOR UNIX/Linux”
Client software for the scanning functions
Remote Scan driver
WIA driver
62
This driver enables you to scan documents remotely and obtain scanned data as an image in the
applications supporting TWAIN on Windows computers. For details, refer to the following guide:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 6:
INSTALLING SCAN DRIVER AND UTILITIES”
This driver enables you to scan documents remotely and obtain scanned data as an image in the
applications supporting WIA (Windows Imaging Acquisition) on Windows computers. For details,
refer to the following guides:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 6:
INSTALLING SCAN DRIVER AND UTILITIES”
Scanning Guide (PDF): “Chapter 5: OTHER SCANNING METHODS”
Client Software
Client software for the e-Filing functions
TWAIN driver
File downloader
e-Filing Web utility
e-Filing Backup/Restore
Utility
This driver enables you to obtain documents stored in e-Filing as an image in application supporting
TWAIN on Windows computers. For details, refer to the following guide:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 6:
INSTALLING SCAN DRIVER AND UTILITIES”
File downloader enables you to obtain documents stored in e-Filing as an image in your Windows
computer. For details, refer to the following guide:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 6:
INSTALLING SCAN DRIVER AND UTILITIES”
This utility enables you to operate or make settings for e-Filing using a browser on your computer.
Since this utility has been already installed to the equipment, enter the IP address of the equipment
into a browser and turn on the power. For details, refer to the following guide:
e-Filing Guide (PDF): “Chapter 3: OVERVIEW ON e-Filing WEB UTILITY”
This utility enables you to back up and restore the data stored in e-Filing. For details, refer to the
following guide:
Software Installation Guide (PDF): “Chapter 8: INSTALLING e-Filing BACKUP/RESTORE UTILITIES”
Client software for the network management functions
TopAccess
TopAccess enables you to view the device information, display logs, create templates and an address
book, and manage the equipment using a browser. Since TopAccess has been already installed to
the equipment, enter the IP address of the equipment into a browser and turn on the power. For
details, refer to the following guide:
TopAccess Guide (PDF): “Chapter 1: OVERVIEW”
Client software for the network fax functions
Fax driver
AddressBook Viewer
This driver enables you to send faxes or Internet faxes from your computer. For details, refer to the
following guides:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 7:
INSTALLING NETWORK FAX UTILITIES”
Network Fax Guide (PDF): “Chapter 1: OVERVIEW”
This viewer enables you to manage the address book (such as fax numbers and E-mail addresses)
and upload the address book from your computer to the equipment. For details, refer to the
following guide:
Software Installation Guide (PDF): “Chapter 2: RECOMMENDED INSTALLATION” or “Chapter 7:
INSTALLING NETWORK FAX UTILITIES”
5
63
Chapter 5 INFORMATION ABOUT EQUIPMENT
Options
The following options are sold separately, and upgrade the performance of the equipment if installed. For details, contact your
service technician or representative.
1
10
7
2
8
3
9
4
1.
Original Cover (KA-3511PC)
7.
This is used to hold an original.
2.
3.
8.
Paper Feed Pedestal (KD-1027)
This pedestal enables you to install the Additional Drawer
Module (optional, MY-1035).
5.
Large Capacity Feeder (KD-1028)
This feeder enables you to feed up to 2500 sheets (80 g/m2
or 20 lb. Bond) or 2000 sheets (90 g/m2 or 28 lb. Bond) of
A4 or LT paper.
6.
Additional Drawer Module (MY-1035)
This drawer can be added to the Paper Feed Pedestal
(optional, KD-1027). Combined with the 2 drawers in the
equipment, paper can be fed from 4 drawers in total.
64
Finisher (MJ-1101)
Saddle Stitch Finisher (MJ-1106)
This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. The Hole Punch Unit
(optional, MJ-6103) can be installed in this Finisher. The
Bridge Unit (optional, KN-4530) is required for the
installation of this Finisher.
Bridge Unit (KN-4530)
This unit acts as a relay for the Finisher and this
equipment.
4.
6
This Finisher enables sort/group finishing and stapling. The
Hole Punch Unit (optional, MJ-6103) can be installed in this
Finisher. The Bridge Unit (optional, KN-4530) is required for
the installation of this Finisher.
Reversing Automatic Document Feeder
(MR-3022)
This unit automatically feeds a stack of originals one by
one to have them copied.
5
9.
Hanging Finisher (MJ-1031)
This Finisher enables sort/group finishing and stapling.
The Bridge Unit (optional, KN-4530) is required for the
installation of this Finisher.
10. Hole Punch Unit (MJ-6103)
This unit enables you to punch holes on printed sheets.
Install it in the Finisher (optional, MJ-1101) or the Saddle
Stitch Finisher (optional, MJ-1106) to use it.
Options
Other options available are as follows. Contact your service technician or representative for details.
Work Table (KK-4550)
Antenna (GN-3010)
This is a small table for placing originals while the equipment is
being operated.
• Installed on the right-hand side of the equipment.
• Cannot be installed with e-BRIDGE ID Gate at the same time.
This is used when the Wireless LAN Module or Bluetooth Module
is installed.
e-BRIDGE ID Gate (KP-2004, KP-2005)
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment.
You can log in and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
• Installed on the right-hand side of the equipment.
• This cannot be installed with the Work Table at the same time.
2nd Line for FAX Unit (GD-1260)
Data Overwrite Enabler (GP-1070)
This unit enables you to add a line to the Fax, making a 2nd line
available.
• Installed inside of the equipment.
• The FAX Unit (optional, GD-1250) is required.
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, Fax, Internet Fax or network Fax is
performed. It overwrites temporarily stored data with random
data.
Desk (MH-1700, MH-1710)
IPsec Enabler (GP-1080)
This is a desk for the equipment.
This enables the IPsec function in this equipment.
Operator’s Manual Pocket (KK-1660)
Meta Scan Enabler (GS-1010)
Keep the manual in this pocket.
This enables the Meta Scan function in this equipment.
Wireless LAN Module (GN-1060)
External Interface Enabler (GS-1020)
This module enables the equipment to be used in a wireless LAN
environment.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
• The equipment cannot be connected to the wireless and wired
LAN at the same time.
This enables the EWB function in this equipment.
FAX Unit (GD-1250)
Bluetooth Module (GN-2010)
This module enables you to perform Bluetooth printing.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
5
65
Chapter 5 INFORMATION ABOUT EQUIPMENT
Logging in
When the equipment is controlled under department or user management, copying and other functions can be performed if
you log in according to the following procedure.
Department management
You can restrict users or manage copy volumes made by an individual group or department in your company using the
department codes. When the equipment is controlled under the department code, turn the power on and enter the
code.
When the power of the equipment is turned ON, the following menu appears.
This menu also appears when the [ACCESS] button on the control panel is pressed or the automatic function clear has
worked.
Automatic function clear:
• This function returns all settings to default without the need to press the [FUNCTION CLEAR] button on the control panel. It works
when a specified period of time has passed since the last paper exit or the last entry of any button. When department or user
management is being used, the display returns to the department code or user information input menu. When they are not being
used, the display returns to the basic menu for the copying function.
• The period is set at 45 seconds by default at the time of installation of the equipment. To change the setting, refer to the following
guide:
MFP Management Guide (PDF): “Chapter 1: SETTING ITEMS (USER)” - “Setting General Functions”
• When connecting to equipment with department or user management enabled using client software, you may need to log in. For
details, ask your administrator.
Key in a department code (max. 63 digits) previously registered and press [OK] on the touch panel. The menu will switch
and the equipment will be ready for use.
If the department code keyed in is incorrect, the menu does not change. Key in the correct one.
After the operation
When you finish all operations, press the [ACCESS] button on the control panel to prevent unauthorized use of the
equipment. The display returns to the department code input menu.
66
Logging in
User management
You can restrict users or manage available functions and past records by means of user management. When the
equipment is managed under this function, turn the power ON and enter the information required (e.g. user name,
password). The menu for entering user information also appears when you press the [ACCESS] button on the control
panel or automatic function clear has worked. Enter the information according to the procedure below.
If you enter an invalid password several times, you may not log in for a certain period since it will be regarded as an unauthorized
access.
When “User account is locked” or “User Name and Password are not recognized.” appears and logging in cannot be performed, ask your
administrator.
If a guest user is enabled in the user management function, [GUEST] is displayed on the touch panel. Press [GUEST] to log in as a guest
user. For the types of functions available, consult the administrator.
MFP local authentication
Windows Domain authentication
LDAP authentication
5
67
Chapter 5 INFORMATION ABOUT EQUIPMENT
The menu for user authentication
appears.
Press [PASSWORD].
Enter the password (maximum 64
letters) and then press [OK].
Press [OK].
7
The equipment becomes being ready to
perform copying and other functions.
MFP local authentication
Windows Domain authentication, LDAP authentication
The domain name previously set by the network
administrator is displayed in [DOMAIN]. For LDAP
authentication, the LDAP server name is displayed in
[LDAP] instead of [DOMAIN].
If the displayed domain name or LDAP server name
is not yours, press
to select one belonging to
you.
68
Press [USER NAME].
Enter the user name (maximum 128
letters) and then press [OK].
Specifications of Equipment
Specifications of Equipment
This section describes the types of acceptable paper, sheet capacity of each feeder and the specifications of the equipment.
Acceptable paper
Feeder
Media type
Weight
Maximum sheet capacity
Paper size
2
Drawers
(Including optional
drawers) *1
Large Capacity
Feeder (optional)
600 sheets (64 g/m , 17 lb. Bond)
550 sheets (80 g/m2, 20 lb. Bond)
500 sheets (81 - 105 g/m2, 24 lb.
Bond, 28 lb. Bond)
PLAIN,
RECYCLED
PAPER
64 - 105 g/m2
17 - 28 lb.
Bond
THICK1
106 - 163 g/m2
300 sheets
- 90 lb. Index
THICK2
164 - 209 g/m2
250 sheets
- 110 lb. Index
THICK3
210 - 256 g/m2
200 sheets
- 140 lb. Index
PLAIN,
RECYCLED
PAPER
64 - 105 g/m2
17 - 28 lb.
Bond
PLAIN,
RECYCLED
PAPER
64 - 105 g/m2
17 - 28 lb.
Bond
THICK1
106 - 163 g/m2
40 sheets
- 90 lb. Index
THICK2 *2
164 - 209 g/m2
30 sheets
- 110 lb. Index
THICK3
210 - 256 g/m2
30 sheets
- 140 lb. Index
THICK4 *3, *4
257 - 280 g/m2
30 sheets *6
- 150 lb. Index
3000 sheets (64 g/m2, 17 lb. Bond)
2500 sheets (80 g/m2, 20 lb. Bond)
2000 sheets (81 - 105 g/m2, 21 - 28
lb. Bond)
100 sheets (64 - 80 g/m2, 17 - 20
lb. Bond)
80 sheets (81 - 105 g/m2, 21 - 28
lb. Bond)
Bypass tray
SPECIAL1,
SPECIAL2 *5
TRANSPARENCY
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
230 g/m2
—
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13LG, 8.5SQ
K format:
8K, 16K, 16K-R
A4, LT
A/B format:
A3, A4, A4-R, A5-R, A6-R *6, B4, B5, B5-R,
FOLIO, 305 mm x 457 mm *8, *9,
320 mm x 450 mm *9, *10, *11,
320 mm x 460 mm *8, *9, *11
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13LG, 8.5SQ,
12 x 18 *8, *9
K format:
8K, 16K, 16K-R
30 sheets *7
Non-Standard size:
Length: 100 - 297 mm (3.9 - 11.7),
Width: 148 - 432 mm (5.8 - 17)
30 sheets *6
A4, LT
To print on the back side of THICK1 to 3, use the bypass tray.
For printing the sticker labels, select “THICK2” as the media type.
The upper receiving tray of the Finisher (MJ-1101), upper receiving tray of the Saddle Stitch Finisher (MJ-1106), tray of the Hanging Finisher (MJ-1031)
and receiving tray of the equipment are available for paper exiting.
When duplex copying is performed on THICK4, black streaks may appear on the copied image. They are highly visible on an image with high or uneven
density.
SPECIAL1 and SPECIAL2 represent “Waterproof paper”.
Automatic duplex copying is not available.
For duplex copying, use waterproof paper for duplex copying.
If an optional finisher has been installed, the receiving tray of the equipment is not available for paper exiting. The upper receiving tray of the Finisher
(MJ-1101) and upper receiving tray of the Saddle Stitch Finisher (MJ-1106) are available for paper exiting.
When paper is exiting, remove one sheet after another from the receiving tray, since it may fall off the tray.
If an optional finisher has been installed, the upper receiving tray of the Finisher (MJ-1101), upper receiving tray of the Saddle Stitch Finisher (MJ-1106)
and the receiving tray of the equipment are available for paper exiting.
Note that black streaks may appear on the edge of the printed paper.
5
69
Chapter 5 INFORMATION ABOUT EQUIPMENT
Paper only acceptable for printing functions
Feeder
Media type
Weight
Maximum sheet capacity
Paper size
2
PLAIN
Bypass tray
THICK1
*1
*2
90 - 105 g/m
24 - 28 lb. Bond
106 - 163 g/m2
- 90 lb. Index
1 sheet *1, *2
305 mm x 1200 mm
(12.00" x 47.24")
Place the sheets one by one on the bypass tray.
If an optional finisher has been installed, the receiving tray of the equipment and tray of the Hanging Finisher (MJ-1031) are not available for paper
exiting, but the upper receiving tray of the Finisher (MJ-1101) and upper receiving tray of the Saddle Stitch Finisher (MJ-1106) are available.
Recommended paper for each media type
Media Type
PLAIN
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
THICK1
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
THICK2
A/B format: ColorCopy/mondi
A/B format: 3478/Zweckform-Avery
LT format: 5165/Avery
THICK3
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
THICK4
SPECIAL1
SPECIAL2
TRANSPARENCY *1
*1
*2
*3
*4
70
Oki recommendations/Manufacturer
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
A/B format: Water Proof Paper Duplex/TOMOEGAWA PAPER *2, *3, *4
LT format: Premium Speciality Paper (Glossy.Two-sided Weather
Resistance Paper)/TOMOEGAWA PAPER *2, *3, *4
AquaAce/Verbatim *4
A/B format: BG72/FOLEX
LT format: CG3700/3M
Weight
2
90 g/m , 24 lb. Bond
100 g/m2, 28 lb. Bond
120 g/m2, 32 lb. Bond
160 g/m2, 60 lb. Cover
200 g/m2
—
220 g/m2, 80 lb. Cover
250 g/m2
280 g/m2, 100 lb. Cover
—
—
Only Oki-recommended OHP film should be used. Using any other film may cause a malfunction.
This type of paper is available for automatic duplex copying (A4/LT or smaller sizes are recommended).
Place the sheets one by one on the bypass tray.
When copy paper is exiting, remove it every time about 10 sheets have accumulated on the receiving tray or the tray of the Finisher (optional).
Specifications of Equipment
ES9460 MFP/ES9470 MFP/CX3535 MFP/CX4545 MFP Specifications
Model name
Type
Original glass
Printing (copying) system
Developing system
Fixing method
Photosensor type
ES9460 MFP/ES9470 MFP/CX3535 MFP/CX4545 MFP
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
Belt fusing
OPC
Flat surface scanning system
Original scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system
through feeding the original)
Original scanning sensor
Linear CCD sensor
Scanning light source
LED lamp
Scanning
600 dpi x 600 dpi
Resolution
Black-and-white: 2400 dpi x 600 dpi (Smoothing process),1 bit
Writing
Color, Image smoothing: 600 dpi x 600 dpi, 8 bits
Acceptable originals
Sheets, books and 3-dimensional objects
Acceptable original size
Max. A3 or LD
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13LG, 8.5SQ, 8K, 16K, 16KDrawer
R
Acceptable copy
paper size
Paper size within 100 - 320 mm (5 1/2 - 12.6) (Length), 148 - 460 mm (8 1/2 - 18.1) (Width)
Bypass
(For printing functions, within 461 mm - 1200 mm (18.15 - 47.24) (width))
64 - 256 g/m2 (17 - 80 lb. Cover (140 lb. Index))
Acceptable copy Drawer
paper weight
Bypass
64 - 280 g/m2 (17 - 100 lb. Cover (150 lb. Index))
ES9460 MFP/CX3535 MFP: Approx. 99 seconds (AC 115 V),
Warm-up time
Approx. 89 seconds (AC 220 - 240 V)
ES9470 MFP/CX4545 MFP: Approx. 160 seconds
ES9460 MFP/CX3535 MFP: Approx. 6.5 seconds
Black-and-white
First copy time
ES9470 MFP/CX4545 MFP: Approx. 5.2 seconds
(A4 or LT
ES9460 MFP/CX3535 MFP: Approx. 8.4 seconds
portrait)
Color
ES9470 MFP/CX4545 MFP: Approx. 6.8 seconds
Continuous copy speed
Refer to the Copying Guide.
Multiple copying
Up to 999 sheets (digital key entry)
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" +0.11" -0.05"),
Black-and-white Trailing edge: 3.0±2.0 mm (0.12±0.08),
Both edge: 2.0±2.0 mm (0.08±0.08)
Leading edge: 5.0 mm +2.0 mm (0.20±0.08"),
Excluded image
Color
Trailing edge: 3.0±2.0 mm (0.12±0.08),
width
Both edge: 2.0±2.0 mm (0.08±0.08)
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17 +0.11 -0.05),
Printer (BlackTrailing edge: 4.2 mm +1.2 mm -2.8 mm (0.17 +0.05 -0.11),
and-white/Color)
Both edge: 4.2±2.0 mm (0.08±0.08)
Actual size
100±0.5%
Reproduction
25 - 400% (in 1% increments)
ratio
Zoom
For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Drawer
Approx. 550 sheets (80 g/m2, 20 lb. Bond), Approx. 500 sheets (105 g/m2, 28 lb. Bond)
Paper supply
Bypass
Approx. 100 sheets (80 g/m2, 20 lb. Bond), Approx. 80 sheets (105 g/m2, 28 lb. Bond)
Receiving tray loading capacity
Approx. 550 sheets (80 g/m2, 20 lb. Bond)
Toner density adjustment
Magnetic auto-toner system
Exposure control
Automatic plus manual selection from 11 exposure steps
USB interface
USB 2.0 (Hi-Speed)
Environment (for normal use)
Temperature: 10 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85% (No Condensation)
Power requirements and Power
AC 220-240 V±10%, 8 A (50/60 Hz): 2.0 kW or less
consumption
AC 115 V±10%, 12 A (50/60 Hz): 1.5 kW or less
(including optional equipments)
Dimensions (equipment only)
699 mm (27.5”) (W) x 742 mm (29.2”) (D) x 759 mm (29.9”) (H)
Europe and North America: Approx. 121 kg (267 lb.)
Weight
Other: Approx. 122 kg (269 lb.) (equipment including developer and drum)
Space occupied (equipment only)
1100 mm (43.3") (W) x 816 mm (32.1") (D)
Storage capacity
Max. 1000 sheets or until the memory is full (Oki’s own chart)
5
• This specification varies depending on the printing conditions and the environment.
• Specifications and appearance are subject to change without notice in the interest of product improvement.
71
Chapter 5 INFORMATION ABOUT EQUIPMENT
Specifications of Options
This section describes the specifications of the options sold separately. For details other than the specifications, see P.64
“Options” in this manual.
Reversing Automatic Document Feeder
Model name
Copy sides
Number of originals
(A4 or LT)
Feeding speed
MR-3022
1-side, Duplex
100 originals (35 - 80 g/m2, 9.3 - 20 lb. Bond) or 16 mm/0.63 or less in height (more than 80 g/m2, 20 lb. Bond)
45 sheets/min. (600 dpi)
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP
Acceptable originals
(A5 and ST size are not acceptable.)
Paper weight
1-sided original: 35 - 157 g/m2, 9.3 - 41.8 lb., 2-sided original: 50 - 157 g/m2, 13.3 - 41.8 lb.
Power source
DC 24 V (supplied from the equipment)
Dimensions
575 mm (22.6) (W) x 528 mm (20.8) (D) x 135 mm (5.3) (H)
Weight
Approx. 12.5 kg (27.6 lb.)
Power consumption 49.5 W max.
Large Capacity Feeder
Model name
Acceptable paper
size
Paper weight
Maximum capacity
Power source
Dimensions
Weight
KD-1028
A4 or LT
64 - 105 g/m2, 17-28 lb. Bond
2500 sheets (80 g/m2, 20 lb. Bond), 2000 sheets (90 g/m2, 28 lb. Bond) (Height: approx. 137 mm or 5.4 x 2)
DC 5 V, DC 24 V (supplied from the equipment)
623 mm (24.5) (W) x 642.3 mm (25.3) (D) x 307.5 mm (12.1) (H) (incl. Stabilizer)
Approx. 27 kg (59.5 lb.)
Paper Feed Pedestal (1 drawer type)
Model name
Acceptable paper
size
Paper weight
Maximum capacity
Power source
Dimensions
Weight
KD-1027
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP (A5, ST and non-standard size are not
acceptable.)
64 - 256 g/m2 (17 - 80 lb. Bond, -140 lb. Index)
550 sheets (80 g/m2, 20 lb. Bond), 500 sheets (105 g/m2, 24 or 28 lb. Bond)
DC 5 V, DC 24 V (supplied from the equipment)
623 mm (24.5) (W) x 642.3 mm (25.3) (D) x 320 mm (12.6) (H) (incl. Stabilizer)
Approx. 21.5 kg (47 lb.)
Additional Drawer Module
Model name
Acceptable paper
size
Paper weight
Maximum capacity
Weight
72
MY-1035
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP (A5, ST and non-standard size are not
acceptable.)
64 - 256 g/m2 (17 - 80 lb. Bond, - 140 lb. Index)
550 sheets (80 g/m2, 20 lb. Bond), 500 sheets (105 g/m2, 24 or 28 lb. Bond)
Approx. 3.7 kg (8.2 lb.)
Specifications of Options
Finisher (MJ-1101)
Model name
Type
Acceptable paper size
Acceptable paper
weight
Number of sheets
stapled at a time
(Including 2 covers (64256 g/m2, 17 lb. Bond to
140 lb. Index))
Stapling position
Power source
Dimensions
Weight
Power consumption
MJ-1101
Floor type (Console type)
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm, LD, LG, LT, LT-R, ST-R, COMP, 8.5SQ, 13LG,
12 x 18, 8K, 16K, 16K-R
64 - 280 g/m2, 17 lb. Bond - 150 lb. Index
64 - 80 g/m2
17 - 20 lb. Bond
50 sheets
Paper size
81 - 90 g/m2
21 - 24 lb. Bond
30 sheets
A4, B5, LT, 8.5SQ, 16K
A3, A4-R, B4, FOLIO, LD, LG, LT-R, COMP,
30 sheets
15 sheets
13LG, 8K
Front, Rear, Double
Supplied from the equipment
535 mm (21.4) (W) x 598 mm (23.92) (D) x 1092 mm (43.68) (H)
Approx. 34 kg (74.8 lb.)
70 W max.
91 - 105 g/m2
25 - 28 lb. Bond
30 sheets
15 sheets
Tray loading capacity of Finisher (MJ-1101)
Unit: mm (with allowable error of ±7 mm or 0.276)
Values in parentheses: Number of sheets (80 g/m2 or 20 lb. Bond)
Upper Tray
MJ-1101 with mixed paper not loaded
Mode
Non-Sort
36.75 mm, 1.45
(250)
18.4 mm, 0.72
(125)
A4, A5-R, B5, LT, ST-R, 8.5SQ, 16K
A3, A4-R, B4, B5-R, FOLIO, 305 mm x 457 mm, LD, LG, LT-R,
COMP, 13LG, 12 x 18, 8K, 16K-R
Lower Tray
MJ-1101 with mixed paper not loaded
Mode
A4, B5, LT,
8.5SQ, 16K
A3, A4-R, B4, FOLIO, LD, LG, LT-R,
COMP, 13LG, 8K
Non-Sort
250 mm, 9.84
(2000)
140 mm, 5.51
(1000)
Sort/Group
250 mm, 9.84
(2000)
140 mm, 5.51
(1000)
Staples loaded
Whichever of 250 mm (9.84), 2000 sheets or
30 sets is reached first
Whichever of 140 mm (5.51), 1000 sheets or
30 sets is reached first
When mixed-size paper is loaded, the tray loading capacity should follow the specifications for larger paper sizes in the above tables.
5
73
Chapter 5 INFORMATION ABOUT EQUIPMENT
Saddle Stitch Finisher (MJ-1106)
Model name
Type
Acceptable paper size
Acceptable paper
weight
Number of sheets
stapled at a time
(including 2 covers (64 256 g/m2, 17 lb. Bond to
140 lb. Index)
Stapling position
MJ-1106
Floor type (Console type)
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450 mm, 320 mm x 460 mm, 330
mm x 483 mm, LD, LG, LT, LT-R, ST-R, COMP, 8.5"SQ, 13"LG, 12" x 18", 13" x 19", 8K, 16K, 16K-R
64 - 280 g/m2 (17 lb. Bond - 150 lb. Index)
A4, B5, LT, 8.5"SQ, 16K
80 g/m2
20 lb. Bond
50 sheets
90 g/m2
24 lb. Bond
50 sheets
105 g/m2
28 lb. Bond
30 sheets
A3, A4-R, B4, FOLIO, LD, LG, LT-R, COMP, 13"LG, 8K
30 sheets
30 sheets
15 sheets
80 g/m2
20 lb. Bond
15 sheets
80 g/m2
20 lb. Bond
5 sheets
90 g/m2
24 lb. Bond
15 sheets
90 g/m2
24 lb. Bond
5 sheets
105 g/m2
28 lb. Bond
10 sheets
105 g/m2
28 lb. Bond
5 sheets
Paper size
Front, Rear, Double
Number of sheets saddle Paper size
stitched at a time
A3, B4, A4-R, LD, LG, LT-R, 8K
Number of sheets
center-folded at a time
Power source
Dimensions
Weight
Power consumption
Paper size
A3, B4, A4-R, LD, LG, LT-R, 8K
Supplied from the equipment
617 mm (24.29") (W) x 603 mm (23.74") (D) x 1085 mm (42.72") (H)
Approx. 70 kg (154.3 lb.)
100 W max.
Tray loading capacity of Finisher
Unit: mm (with allowable error of ±7 mm or 0.28)
Values in parentheses: Number of sheets (80 g/m2 or 20 lb. Bond)
Upper Tray
With mixed paper not loaded
Mode
Non-Sort
36.75 mm
(250)
A4, A5-R, B5, LT, ST-R, 8.5"SQ, 16K
A3, A4-R, B4, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450
mm, 320 mm x 460 mm, LD, LG, LT-R, COMP, 13"LG, 12"x18",
8K, 16K-R
18.4 mm
(125)
Lower Tray
With mixed paper not loaded
Mode
A4, B5, LT, 8.5"SQ, 16K
A3, A4-R, B4, FOLIO, 305
mm x 457 mm, LD, LG,
LT-R, COMP, 13"LG, 12" x 18",
8K
Non-sort
350 mm
(3000)
Sort/Group
350 mm
(3000)
175 mm
(1500)
175 mm
(1500)
Front/Rear Single Position Stapling
Two Positions Stapling
Whichever of 100 sets or 2000
Whichever of 150 sets or 2000
sheets is reached first
sheets is reached first
Whichever of 50 sets or 1000 sheets Whichever of 75 sets or 1000 sheets
is reached first
is reached first
• When mixed-size paper is loaded, the tray loading capacity should follow the specifications for larger paper sizes in the above tables.
• For the loading capacity of the saddle stitch tray, refer to the following guide:
Copying Guide (PDF): “Chapter 3: BASIC COPY MODES” - “Selecting Finishing Mode”
74
Specifications of Options
Hanging Finisher (MJ-1031)
Model name
Type
Acceptable paper size
Acceptable paper
weight
Number of sheets
stapled at a time
(Including 2 covers (64 256 g/m2, 17 lb. Bond to
140 lb. Index))
Stapling position
Power source
Dimensions
Weight
Power consumption
*1
*2
MJ-1031
Hanging-type
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm *1, 320 mm x 450 mm *2, 320 mm x 460 mm *2,
LD, LG, LT, LT-R, ST-R, COMP, 8.5SQ, 13LG, 12 x 18 *1, 8K, 16K, 16K-R
64 - 280 g/m2, 17 lb. Bond - 150 lb. Index
A4, B5, LT
80 g/m2
20 lb. Bond
50 sheets
90 g/m2
24 lb. Bond
26 sheets
105 g/m2
28 lb. Bond
24 sheets
A3, A4-R, B4, FOLIO, LD, LG, LT-R, COMP
30 sheets
15 sheets
15 sheets
Paper size
Rear
Supplied from the equipment
411 mm (16.18) (W) x 594.2 mm (23.39) (D) x 382.4 mm (15.06) (H)
Approx. 12 kg (26.5 lb.)
50 W max.
If THICK3 or thicker paper is used, remove one sheet after another from the receiving tray when it is exiting, since it may fall off the tray.
When paper is exiting, remove one sheet after another from the receiving tray, since it may fall off the tray.
Tray loading capacity of Hanging Finisher (MJ-1031)
Unit: mm (with allowable error of ±4 mm or 0.158)
Values in parentheses: Number of sheets (80 g/m2 or 20 lb. Bond)
(MJ-1031 with mixed paper not loaded)
Mode
A4, A5-R, B5, LT, ST-R, 8.5SQ
A3, A4-R, B4, B5-R, FOLIO, 305 mm x 457 mm,
LD, LG, LT-R, COMP, 13LG, 12 x 18
Non-Sort
130 mm, 5.12
(1000)
65 mm, 2.56
(500)
Sort/Group
130 mm, 5.12
(1000)
65 mm, 2.56
(500)
Staples loaded
Whichever of 130 mm (5.12), 1000 sheets or
30 sets is reached first
Whichever of 65 mm (2.56), 500 sheets or
30 sets is reached first
• Sort/Group/Staple is not available with A5-R, B5-R, ST-R.
• If copied paper remains on the receiving tray at the time of the next copying job, the loading capacity is the same as that for mixed-size paper.
(MJ-1031 with mixed paper loaded)
Mode
FOLIO and A4-R
A3 and A4
B4 and B5
LD and LT
LG and LT-R
Non-Sort
Sort/Group
65 mm, 2.56
(500)
65 mm, 2.56
(500)
Staples loaded
Whichever of 65 mm (2.56), 500 sheets or
30 sets is reached first
5
75
Chapter 5 INFORMATION ABOUT EQUIPMENT
Hole Punch Unit (MJ-6103 Series)
Model name
Acceptable paper size
Acceptable paper
weight
Dimensions
Weight
MJ-6103 Series
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP, 8.5SQ, 13LG, 8K, 16K, 16K-R
64 - 256 g/m2, 17 lb. Bond - 140 lb. Index
(OHP film and specially treated paper are not available.)
112 mm (4.41) (W) x 573 mm (22.56) (D) x 323 mm (12.72) (H) (excl. Lower cover)
Approx. 7 kg (15.4 lb.)
Number of punching holes and hole diameter
Japan and most of Europe
(MJ-6103E)
2 holes
(6.5 mm or 0.26 dia.)
North America
(MJ-6103N)
2/3 holes switchable
(8.0 mm or 0.32 dia.)
France
(MJ-6103F)
4 holes
(6.5 mm or 0.26 dia.; 80 mm or 3.15 pitch)
4 holes
(6.5 mm or 0.26 dia.; 70 mm and 21 mm or 2.76
and 0.83 pitch)
Sweden
(MJ-6103S)
Available paper size
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
COMP, 8.5SQ, 13LG, 8K, 16K, 16K-R
2 holes: A4-R, LG, LT-R, COMP, 8.5SQ, 13LG, B4, B5, B5R, FOLIO, 16K-R
3 holes: A3, A4, LD, LT, 8K, 16K
A3, A4, LD, LT, 8K, 16K
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
COMP, 8.5SQ, 13LG, 8K, 16K, 16K-R
Bridge Unit
Model name
KN-4530
FAX Unit
Model Name
Size of Original
Recording Paper Size
Compatibility
Communication Modes
Communication
Resolution
Transmission Rate
Encoding Systems
Memory Capacity
Unit Type
Applicable Network
GD-1250
A3, A4, A4-R, A5, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST, ST-R, COMP
297 mm x 420 mm (A3), 210 mm x 297 mm (A4), 148 mm x 210 mm (A5), 257 mm x 364 mm (B4),
182 mm x 257 mm (B5), 210 mm x 330 mm (FOLIO), 11 x 17 (LD), 8.5 x 14 (LG), 8.5 x 11 (LT),
5.5 x 8.5 (ST), 0. 1/8 x 14 (COMP)
Exclusive Mode, ECM, G3
Horizontal: 8 dots/mm, 16 dots/mm, 300 dots/inch
Vertical: 3.85 lines/mm, 7.7 lines/mm, 15.4 lines/mm, 300 dots/inch
33,600/31,200/28,800/26,400/24,000/21,600/19,200/16,800/14,400/12,000/9,600/7,200/4,800/2,400 bps
JBIG/MMR/MR/MH
Transmission/Reception: 1 GB (HDD) *1
Desktop type, transmitting/receiving dual type
Public Switched Telephone Network (PSTN)
*1 For hard drives, MB means 1 million bytes.
(Total HDD accessible capacity may vary depending on operating environment.)
For details of the FAX Unit (GD-1250), refer to the following guide:
GD-1250/GD-1260 Operator's Manual for FAX Unit: “Chapter 1: BEFORE USING FAX”
Oki-recommended paper is used for the values above. Specifications and appearance are subject to change without
notice in the interest of product improvement.
76
INDEX
A, B
Acceptable paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
[ACCESS] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Additional Drawer Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 64, 72
Alarm lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Alert message indication area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Automatic duplexing unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bridge Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 76
Bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
C, D
Charger cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
[CLEAR] button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Client Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Client Utilities CD-ROM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 10
[COPY] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 51, 52
[COUNTER] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Date and time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Department management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Description of Each Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Digital keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
E, F
e-Filing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 56
[e-FILING] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
[ENERGY SAVER] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
energy saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Error codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
[EXTENSION] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 53
[FAX] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FAX Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 76
Finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 64, 73
Front cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
[FUNCTION CLEAR] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Function display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
H, I, J, L
Hanging Finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 64, 75
[?] (HELP) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Hole Punch Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 76
[INTERRUPT] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Items Included in This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
[JOB STATUS] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Large Capacity Feeder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 64, 72
Paper feed cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Paper Feed Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 64, 72
Paper size indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Placing paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Platen sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
[POWER] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
[PRINT] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PRINT DATA lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 57
R, S
Receiving tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Recommended paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Regular Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Replacing Staple Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Replacing Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replacing Waste Toner Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Reversing Automatic Document Feeder . . . . . . . . . . . . . . . . . . . . 6, 64, 72
Role Information Displayed Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
S
Saddle Stitch Finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 74
[SCAN] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 52, 54, 55
Scanning area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Slit glass cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Specifications of Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
[START] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
[STOP] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
T, U, W
Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Touch panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 9, 11
Turning the power OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Turning the power ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
USB port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
USB terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
[USER FUNCTIONS] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
User management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
User name display area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Waste toner box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
M, N
MAIN POWER lamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Main power switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
MEMORY RX / LINE lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
[MENU] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Message indication area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Network interface connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
O, P
ON/OFF lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operator’s Manual Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Original Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Original glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Original scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Paper exit stopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
77
OKI CONTACT DETAILS
OkicontactName. Oki Systems
(UK) Limited
OkicontactAddress.550 Dundee Road
Slough Trading Estate
Slough
Berkshire
SL1 4LE
Tel: +44 (0) 1753 819819
Fax: +44 (0) 1753 819899
http://www.oki.co.uk
Oki Systems (Iberica), S.A.U
C/Teide, 3
San Sebastian de los Reyes
28703, Madrid
Tel: +34 91 3431620
Fax: +34 91-3431624
Atención al cliente: 902 36 00 36
Website: www.oki.es
Oki Service
Serviço de apoio técnico ao
Cliente
Tel: 808 200 197
E-mail: okiserv@oki.pt
Oki Systems Ireland Limited
The Square Industrial Complex
Tallaght
Dublin 24
Oki Systèmes (France) S.A.
44-50 Av. du Général de Gaulle
94246 L’Hay les Roses
Paris
OKI Europe Ltd. (Russia)
2I¿FH%OGJ
Zagorodnoye shosse
117152, Moscow
Tel: +353 (0) 1 4049590
Fax: +353 (0) 1 4049591
http://www.oki.ie
Tel: +33 01 46 15 80 00
Télécopie: +33 01 46 15 80 60
Website: www.oki.fr
Tel: +74 095 258 6065
Fax: +74 095 258 6070
e-mail: info@oki.ru
Website: www.oki.ru
Technical support:
Tel: +7 495 564 8421
e-mail: tech@oki.ru
Oki Systems Ireland Limited Northern Ireland
19 Ferndale Avenue
Glengormley
BT36 5AL
Northern Ireland
Tel: +44 (0) 7767 271447
Fax: +44 (0) 1 404 9520
http://www.oki.ie
Technical Support for all Ireland:
Tel:+353 1 4049570
Fax:+353 1 4049555
E-mail: tech.support@oki.ie
OKI Systems (Czech and Slovak),
s.r.o.
,%&±3REĜHåQt
186 00 Praha 8
Czech Republic
Tel: +420 224 890158
Fax: +420 22 232 6621
Website: www.oki.cz, www.oki.sk
Oki Systems (Deutschland) GmbH
Hansaallee 187
40549 Düsseldorf
Tel: 01805/6544357**
01805/OKIHELP**
Fax: +49 (0) 211 59 33 45
Website:
www.okiprintingsolutions.de
info@oki.de
¼0LQXWHDXVGHPGW)HVWQHW]
der T-Com (Stand 11.2008)
ƩLjĮnjǎNjƿĮǐIJǔnjıǑıIJdžNjƾIJǔnj2.,
CPI S.A1 Rafailidou str.
177 78 Tavros
Athens
Greece
ƷHO
Fax: +30 210 48 05 801
EMail:sales@cpi.gr
OKI Systems (Magyarország) Kft.
Capital Square
Tower 2
7th Floor
H-1133 Budapest,
Váci út 76
Hungary
Telefon: +36 1 814 8000
Telefax: +36 1 814 8009
Website: www.okihu.hu
OKI Systems (Italia) S.p.A.
via Milano, 11,
20084 Lacchiarella (MI)
Tel: +39 (0) 2 900261
Fax: +39 (0) 2 90026344
Website: www.oki.it
OKI Printing Solutions
Platinium Business Park II, 3rd Floor
ul. Domaniewska 42
02-672 Warsaw
Poland
Tel: +48 22 448 65 00
Fax: +48 22 448 65 01
Website: www.oki.com.pl
E-mail: oki@oki.com.pl
Hotline: 0800 120066
E-mail: tech@oki.com.pl
Oki Systems (Ibérica) S.A.
Sucursal Portugal
(GLItFLR3ULPH
Av. Quinta Grande 53
7º C Alfragide
2614-521 Amadora
Portugal
Tel: +351 21 470 4200
Fax: +351 21 470 4201
Website:www.oki.pt
E-mail : oki@oki.pt
- 145 -
Oki Systems (Österreich)
Campus 21
Businesszentrum Wien Sued
Liebermannstrasse A02 603
22345 Brun am Gebirge
Tel: +43 223 6677 110
Drucker Support:
+43 (0) 2236 677110-501
Fax Support:
+43 (0) 2236 677110-502
Website: www.oki.at
OKI Europe Ltd. (Ukraine)
Raisy Opkinoy Street,8
Building B, 2nd Floor,
Kiev 02002
Ukraine
Tel: +380 44 537 5288
e-mail: info@oki.ua
Website: www.oki.ua
2.,6LVWHPYH<D]ÕFÕd|]POHUL7LF
/WGùWL
Harman sok Duran Is Merkezi,
No:4, Kat:6,
34394, Levent
øVWDQEXO
Tel: +90 212 279 2393
Faks: +90 212 279 2366
Web: www.oki.com.tr
www.okiprintingsolutions.com.tr
Oki Systems (Belgium)
Medialaan 24
1800 Vilvoorde
Helpdesk: 02-2574620
Fax: 02 2531848
Website: www.oki.be
AlphaLink Bulgaria Ltd.
2 Kukush Str.
%XLOGLQJ³$QWLP7RZHU´À
6R¿D%XOJDULD
Oki Systems (Sweden) AB
Borgafjordsgatan 7
Box 1191
164 26 Kista
tel: +359 2 821 1160
fax: +359 2 821 1193
Website: http://bulgaria.oki.com
Tel. +46 (0) 8 634 37 00
e-mail:
info@oki.se för allmänna frågor om
Oki produkter
Oki Data(Australia) Pty Ltd.
146 O’Riordan Street Mascot,
NSW 2020, Australia
Tel: +61 (02) 9667 7240
Fax: +61 (02) 9667 7333
http://www.oki.com.au
support@oki.se för teknisk support
gällandes Oki produkter
Vardagar: 08.30 - 12.00,
13.00 - 16.00
Website: www.oki.se
OKI Printing Solutions
Herstedøstervej 27
2620 Albertslund
Danmark
Oki Systems (Schweiz)
Baslerstrasse 15
CH-4310 Rheinfelden
Comworth Systems Ltd.
8 Antares Place Mairangi Bay,
Auckland, New Zealand
Support deutsch +41 61 827 94 81
Support français +41 61 827 94 82
Support italiano +41 061 827 9473
Tel: +41 61 827 9494
Website: www.oki.ch
Tel: (64) 9 477 0500
Fax: (64) 9 477 0549
http://www.comworth.co.nz
Oki Systems (Finland) Oy
Polaris Capella
Vänrikinkuja 3
02600 Espoo
Oki Data do Brasil, Ltda.
Rua Alexandre Dumas, 2220-80 andar
Chácara Santo Antonio
04717-004, São Paulo, SP Brasil
Tel: +358 (0) 207 900 800
Fax: +358 (0) 207 900 809
Website: ZZZRNL¿
Tel: 55-11-3444-6747(Grande São Paulo)
0800-11-5577(Demais localidades)
Fax:5511-3444-3501
e-mail: okidata@okidata.com.br
http://WWW.OKIPRINTINGSOLUTIONS.COM
2NL'DWD63/WG0DOD\VLD5HS2I¿FH
Suite 21.03, 21st Floor Menara IGB,
Mid Valley City,
Lingkaran Syed Pura 59200,
Kuala Lumpur, Malaysia
Oki Systems (Holland) b.v.
Neptunustraat 27-29
2132 JA Hoofddorp
Oki Data (Singapore) Pte. Ltd.
438A Alexandra Road #02-11/12,
Lobby 3, Alexandra Technopark
Singapore (119967)
Adm.: +45 43 66 65 00
Hotline: +45 43 66 65 40
Salg: +45 43 66 65 30
Fax: +45 43 66 65 90
Website: www.oki.dk
Helpdesk: 0800 5667654
Tel: +31 (0) 23 55 63 740
Fax: +31 (0) 23 55 63 750
Website: www.oki.nl
Oki Systems (Norway) AS
Tevlingveien 23
N-1081 Oslo
Tel: +47 (0) 63 89 36 00
Telefax: +47 (0) 63 89 36 01
Ordrefax: +47 (0) 63 89 36 02
Website: www.oki.no
Tel: (65) 6221 3722
Fax: (65) 6594 0609
http://www.okidata.com.sg
Oki Systems (Thailand) Ltd.
1168/81-82 Lumpini Tower,
27th Floor Rama IV Road
Tungmahamek, Sathorn
Bangkok 10120
Tel: (662) 679 9235
Fax: (662) 679 9243/245
http://www.okisysthai.com
General Systems S.R.L.
(Romania)
Sos. Bucuresti-Ploiesti Nr. 135.
Bucharest 1
Romania
Oki Systems (Hong Kong) Ltd.
Suite 1908, 19/F, Tower 3,
China Hong Kong City
33 Canton Road, TsimShaTsui,
Kowloon, Hong Kong
Tel: +40 21 303 3138
Fax: +40 21303 3150
Website: http://romania.oki.com
Tel: (852) 3543 9288
Fax: (852) 3549 6040
http://www.okiprintingsolutions.com.hk
Var vänlig kontakta din Återförsäljare
i första hand, för konsultation. I andra
hand kontakta
- 146 -
Tel: (60) 3 2287 1177
Fax: (60) 3 2287 1166
©2012 Oki Data Corporation All rights reserved
Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of Oki Data.
ES9460 MFP/ES9470 MFP
CX3535 MFP/CX4545 MFP
Oki Data Corporation
4-11-22 Shibaura, Minato-ku,Tokyo
108-8551, Japan
www.okiprintingsolutions.com
45105202EE
6LJ05509000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising