wireless communica tions wireless communications

wireless communica tions wireless communications
MKII-BUD Buddy Phone® D2
OTS
WIRELESS COMMUNICATIONS
SEE Below
The MKII-BUD Buddy Phone® D2 is a digital, micro-miniature,
ultrasonic transceiver allowing communication between two
or more scuba divers or surface stations. Using “Digital Signal
Processing” (DSP) techniques, the Buddy Phone® produces
uncompromising speech clarity.
Features
• Uses ultrasonic upper single sideband for transmission
• Voice guided menu with volume adjustment and channel A/B
option or continuous voice transmission mode
• Used primarily with Search and Rescue Teams and Military
Commands but the sport and movie industry are quickly
standardizing on it
• Configured to be installed on Interspiro/AGA® full face masks
• U.S. Navy Approved
OTS MKII-BUD Buddy Phone® D2 Specifications
Nominal Range
Reference Frequency
50 to 500 m depending on Sea Conditions and
noise levels
OTS-900408-002
MKII BUD Buddy Phone® D2 underwater communication
system only. Set up to install in most AGA® full face masks.
OTS-900408-010
Ceramic with dynamic depth compensation
OTS underwater communications system includes the
MKII BUD Buddy Phone® D2 and MKII AGA® full face
mask including 2nd stage regulator; ambient breathing
valve Part Number OTS-910271-001 sold separately.
Dynamic noise cancelling and waterproof
MKII-BUD/S Compatibility Chart
32.768 kHz upper single sideband
Audio Bandwidth
300 Hz to 3,000 Hz
Auto. Gain Control
Greater than 80 dB
Earphone
Microphone
Transducer
Acoustic Power
Battery Type
Operating Depth
Weight in Air
OTS MKII-BUD Buddy Phone® D2
XT-100 Buddy Phone®
Ceramic cylinder
XT-100-H Buddy Phone®
1/2 Watts (PEP)
Alkaline 9V type, or OTS energy NiMH 9.6V
Rechargeable (RBN-9H)
130 FSW
8.1 oz. (229.64 g)
SCU-BUD/S Buddy Phone®
TEC-BUD Buddy Phone
®
RX-100 Buddy Phone®
Interspiro (AGA) Full Face Masks
SSB-2010 Aquacom®
SP-100D-2 Buddy Phone2®
SSB-2000/1 Aquacom®
SSB-1001B Aquacom®
STX-101/M Aquacom
SSB-2001B Aquacom®
®
Earphone/Microphone Assembly
Earphone/Microphone Assemblies are designed to allow the user to
connect either hard-wire or through-water communications.
Features
• OTS earphone/microphone assemblies are designed for all
Interspiro Face Masks such as the MKII and MK20, Kirby
Morgan® EXO-BR™ Dive Masks, and Kirby Morgan® M-48
SuperMasks®
EMA-2 Ear and Mic Assembly for Interspiro AGA® full face mask
(shown in picture): Part Number OTS-911060-001 Includes
• Hot Mic: Part Number OTS-912086-000
• (2) Earphone Holders: Part Number OTS-115014-000
EMX-2B Ear and Mic Assembly for Kirby Morgan® EXO-BR™:
Part Number OTS-911060-026 Includes
• Hot Mic: Part Number OTS-912086-000
• (2) Earphone Holders: Part Number OTS-115014-000
EMD-2 Ear and Mic Assembly for Kirby Morgan® M-48
SuperMask®: Part Number OTS-911060-067 Includes
• Hot Mic: Part Number OTS-912086-000
• (2) Earphone Holders: Part Number OTS-115014-000
Domestic U.S.: 1.877.462.6700
International: 1.760.208.6500
OTS Earphone/Microphone Assembly
OTS-911060-001
Interspiro AGA® FFM, Hot Mic, Dual Earphones,
PTT Control, Hi-Use
OTS-911060-026
Kirby Morgan® EXO-BR™ (New Style/Oral-Nasal),
Hot Mic, Dual Earphones, PTT Control, Hi-Use
OTS-911060-067
Kirby Morgan® M-48, Hot Mic, Dual Earphones,
PTT Control, Hi-Use
OTS-911060-044
Interspiro AGA® FFM, Hot Mic, Dual Earphones,
PTT Control, Male 4-Pin Marsh Marine Connector
Amron International
WIRELESS COMMUNICATIONS
see Below
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising