Fast Track DTIS Quick - Delphi Display Systems

Fast Track DTIS Quick - Delphi Display Systems
w w w. f a s t t r a c k t i m e r. c o m
Requirements and Setup
DTIS (Drive-Thru Information System)
Fast Track PC Software
USB to VGA Adapter Driver
Installing and Configuring
DTIS (Drive-Thru Information System) / Fast Track PC Software
Requirements:
Fast Track Timer2000/3000 Series E3 Timer
Firmware Version 3.04F (or higher)
RTD Enabled – DTIS
Ethernet – Connected to network
PCSS Port - 4660 / RTD Port - 4661
Local PC
Windows 2000, XP w/Service pack 2, Vista
Windows .NET Framework 2.0 (or higher)
USB 2.0 (ONLY)
LCD Display
Flat Panel LCD Monitor - Recommended 17” or above (Provided by Authorized Fast Track Dealer or end user)
Adjustable/Tilting Mounting Bracket (Provided by Authorized Fast Track Dealer or end user)
USB to VGA Adapter (Provided in DTIS Kit) OR 2nd Video Port (Provided by end user)
VGA Cable from USB to VGA Adapter / 2nd Video Port to LCD (50ft. VGA Cable provided in DTIS Kit)
USB to VGA Adapter Driver Software – (When using USB to VGA Adapter)
DTIS Software
USB TO VGA ADAPTER INSTALLATION AND SETUP (FOR DTIS INSTALLATION ONLY):
INSTALL USB TO VGA ADAPTER DRIVER AND ADAPTER BEFORE INSTALLING DTIS SOFTWARE






Mount flat panel monitor in drive-thru area (location determined by customer)
Connect 50ft. VGA cable from adapter to the 2nd monitor
Login Under Administrator Access
Insert USB to VGA Adapter Driver Disc into CD/ROM drive (disc included with USB to VGA Adapter)
Install USB to VGA Adapter Driver BEFORE CONNECTING ADAPTER
Plug USB to VGA Adapter into an available USB port
DTIS INSTALLATION AND SETUP:
FOLLOW INSTALLATION STEPS IN THE ORDER BELOW TO ACHIEVE THE BEST RESULTS
Install Manuals from CD and refer to specific User Guides for Complete Instructions
























Insert DTIS disc into the CD/ROM Drive
Install DTIS Software
Click START
Select ALL Programs
Select Fast Track PC Software
Select E3.exe to open the configuration utility. This will locate the Fast Track Timer on the network and display settings
Verify that the IP Address, Gateway and Subnet Mask are correct for the timer on the local network
Verify that RTD PORT = 4661
If correct, Click EXIT. If incorrect, Click CONFIGURE and use the E3.exe utility to correct and configure settings
(Contact Fast Track Technical Support for assistance @ 714-876-6103)
Open DTIS.exe application (shortcut located on desktop)
Select the radio button “Get Data from Fast Track Timer”
Enter the IP/DNS Address and Port# (Default Port# 4661)
Click “Validate Incoming Data”
You should see the message “Data validation successful. Click NEXT to continue”
If YES, Click “NEXT” / If NO, contact Fast Track Technical Support for assistance
Select desired Display setting (Typical setting - DISPLAY 2)
Select the template format that best matches the customer’s needs (1 Field, 2 Fields, 4 Fields, etc)
Select to display time in MM:SS (Minutes/Seconds) or SSS (Seconds Only)
Select / Deselect “SHOW DRIVE-THRU”
Click “NEXT”
Assign an EVENT to each field (MENU, GREET, PICKUP, TOTAL, ALL, etc)
Assign the INFORMATION to display for the EVENT in each field (AVERAGE, TARGET%, TIME/AVERAGE)
Once an event and information has been assigned to each field, click “FINISH”
The DTIS screen should now appear on the 2nd monitor and time correctly
Installing and Configuring
DTIS (Drive-Thru Information System) / Fast Track PC Software
To Customize DTIS Templates







“Right Click” the DTIS Icon in the system tray
Click “Configure”
Click “Validate Incoming Data”
Click NEXT
Select the desired template
Assign an EVENT and INFORMATION to each field
Click “Finished”
IMPORTANT!
Settings to adjust on in-store PC for DTIS Installation:




Disable Screen Saver
Disable Automatic Power Scheme Settings: “Monitor”, “Hard Disk”, “Standby” and “Hibernate”
Logout of Administrator Access and login as Store User Account when installation is complete
Test all components of installation
Fast Track PC Software INSTALLATION AND SETUP:
3000 SERIES TIMERS - ALWAYS INSTALL Fast track pc software
2000 SERIES - ONLY INSTALL IF PC SOFTWARE SITE LICENSE WAS PURCHASED
Install Manuals from CD and refer to specific User Guides for Complete Instructions
























Insert Fast Track PC Software disc into the CD/ROM Drive (VER 2.25 or higher)
Install Fast Track PC Software VER 2.25 (or higher) on in-store PC
Open FastTrack.exe application located in C:/Program Files/Fast Track Software Suite
Select “CONFIG”
Select “Network E3”
The network utility will locate the Fast Track Timer on the network and display settings
Verify that the IP Address, Gateway and Subnet Mask are correct for the timer on the local network
Verify that PCSS PORT = 4660
If correct, Click EXIT. If incorrect, Click CONFIGURE and use the E3.exe utility to correct and configure settings
Select SITE
Enter a NAME for the site
Select TCP/IP for network communication
Set the IP Address for the site
Set Port# = 4660 (Unless otherwise specified)
Select desired REPORTS and SETTINGS
Click APPLY
Click OK
Select DOWNLOAD
Select the Site that was created in the “Download” dialog box
Check “Disconnect When Finished”
Click “SINGLE SITE”
The PC should connect to the timer and perform a complete download.
If YES, Click EXIT. If NO, verify connections, IP address and settings
If the download worked correctly, close FastTrack.exe
Please contact Fast Track Technical Support if any problems or issues:
714-876-6103
Drive-Thru Information System
INCLUDES:
DTIS Application
USB to VGA Adapter
50ft. VGA Cable
Fast Track PC Software Disk + Site License
Ethernet Network Port
25ft. Network Cable
3000 SERIES TIMER
L1
L2
L3
L4
L5
L6
L7
*FLAT PANEL MONITOR
MOUNTING BRACKET
L8
Phase Research Santa Ana, California
714-850-1320 www.fasttracktimer.com
*WALL MOUNT FLAT
PANEL MONITOR
MADE IN U.S.A.
VGA CABLE
CAT 5
CAT 5
USB TO VGA ADAPTER
**HUB/ROUTER
**IN-STORE
©
WINDOWS PC
*Flat Panel Monitor and Mounting
Bracket sold separately
**DTIS Application will run on customers
in-store Windows© PC and Network
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising