Lithium-ion Cordless Lawn Mower

Lithium-ion Cordless Lawn Mower
Lithium-ion Cordless
Lawn Mower
36V
Instruction Manual
2 Year Replacement Warranty
LML-036
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
0612
To view the full range visit:
www.ozito.com.au
Specifications - model no. LML-036
Battery power:
Charge time: No load speed: Cutting diameter:
Height adjustments:
Cutting heights:
Capacity of catcher:
Weight with battery:
1 x 36V, 2.6Ah Lithium-ion
3-5 Hours
3800/min
370mm
5
30, 40, 50, 65 & 80mm
40 Litres
16kgs
KNOW your Product
14
1
2
13
3
4
15
12
5
10
11
6
9
7
9
17
19
8
1. Start/stop lever
2. Upper handle
3. Handle securing knob
4. Grass catcher flap
5. Grass catcher
6. Height adjustment lever
7. Quick adjustment knob
8. Wheels
9. Battery
10. Battery cover
1
11. Lifting handle
20
12. Lower handle
13. Cord clips
14. Lock-off button
15. Safety key
16. Securing Latch (not shown)
17. Battery charge indicator button
18. Battery charge indicator
19. Charger
20. Charger LED
18
TABLE OF CONTENTS
SPECIFICATIONS ……………………………………….. Page 1
INTRODUCTION………………………………………… Page 3
ELECTRICAL SAFETY…………….………………………Page 3
GENERAL POWER TOOL SAFETY WARNINGS………Page 4
BATTERY & CHARGER SAFETY WARNING……………Page 6
ADDITIONAL SAFETY WARNINGS FOR LAWN MOWER …………………………………………. Page 8
ASSEMBLY…………………………………………………Page 10
CHARGING THE BATTERY…………………………….. Page 12
OPERATION……………………………………………… Page 13
MAINTENANCE…………….…………………………… Page 15
SPARE PARTS …………….……………………………... Page 17
DESCRIPTION OF SYMBOLS …………………………. Page 17
PACK CONTENTS ……………………………………… Page 18
WARRANTY……………………………………………… Page 19
2
INTRODUCTION
Congratulations on purchasing an Ozito Lithium Ion Cordless
Lawn Mower. We aim to provide quality tools at an affordable
price. We hope you will enjoy using this tool for many years.
Your Lithium Ion Cordless Lawn Mower LML-036 has been designed for small to medium size lawns and being cordless, it
offers maximum convenience of operation without the need
for a connection to the mains power. It is intended for DIY
(Do It Yourself) use only. It is not built for continuous daily use
in a trade or professional capacity.
electrical safety
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING
INSTRUCTIONS FOR YOUR BATTERY CHARGER.
• Before using the charger read all instructions and cautionary markings on the
charger, battery pack and the product using the battery pack.
Danger! If the battery pack case is cracked or damaged, do not insert it into
charger. There is a danger of electric shock or electrocution.
WARNING! Do not allow any liquid to get inside charger. Electric shock may
result. To facilitate cooling of the battery pack after use, avoid placing the
charger or battery pack in a warm environment such as in a metal shed, or an
uninsulated trailer.
3
general Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in all of the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e)Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
4
general Power Tool Safety Warnings
f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g)If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) Power tool use and care
a)Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b)Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c)Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d)Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e)Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
6) Service
a)Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5
b)If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
LITHIUM BATTERY AND CHARGER SAFETY FEATURES
Over charging protection
This feature ensures that the battery is never overcharged. When the battery has
reached it’s full charge capacity the charger will shut off protecting the internal components of the battery from being damaged.
Over discharge protection
An internal component of the battery pack is an over discharge protector. This feature will stop the battery from discharging beyond the recommended lowest safety
voltage.
Over heat protection
The battery has an internal thermister cut off sensor which will cease the charging
cycle if the battery becomes hot during the charging process. This thermister sensor
will also stop the battery from operating should the battery become too hot during
the operation of the tool. This can happen when the tool is overloaded or being
used for extended periods of time .
Up to 30min in cooling time may be required depending on ambient temperature
and the operation being performed.
Over current protection
Should the battery be overloaded and the maximum current draw be exceeded the
battery will temporarily stop working to protect the internal components. The battery will resume normal operation once the excessive current draw has returned to a
normal level. This may take a few seconds.
Short circuit protection
If the battery pack was to short circuit the short circuit protector would immediately
stop the battery pack from operating. This will prevent further internal components
of the battery or the tools becoming damaged.
6
LITHIUM ION BATTERY AND CHAGER SAFETY WARNINGS
WARNING! Do not allow any liquid to get inside charger. Electric shock
may result. To facilitate cooling of the battery pack after use, avoid placing the
charger or battery pack in a warm environment such as in a metal shed, or
an uninsulated trailer.
•
Before using the charger read all instructions and cautionary markings on the
charger, battery pack and the product using the battery pack.
Danger! If the battery pack case is cracked or damaged, do not insert it into
charger. There is a danger of electric shock or electrocution.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of fire, electric shock or electrocution.
Do not place any object on top of the charger or place the charger on a soft
surface that may result in excessive internal heat. Place the charger in a position
away from any heat source.
To reduce risk of damage to the electric plug and cord, pull by the plug rather
than the cord when disconnecting the charger.
Make sure the cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution.
Do not operate the charger if it has received a sharp blow, been dropped or
otherwise damaged in any way. Have it checked by an electrician or power tool
repairer.
Do not disassemble charger. Take it to an electrician or power tool repairer when
service or repair is required. Incorrect reassembly may result in a risk of electric
shock, electrocution or fire.
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk.
Never attempt to connect 2 chargers together.
DO NOT store or use the tool and battery pack in locations where the temperature
may reach or exceed 40ºC (such as inside sheds or metal buildings in summer).
The charger is designed to operate on standard household electrical power (240
volts). Do not attempt to use it on any other voltage!
The battery pack is not fully charged out of the carton. First read the safety
instructions and then follow the charging notes and procedures.
The longest life and best performance can be obtained if the battery pack is
charged when the air temperature is between 18 - 24ºC. Do not charge the battery pack in an air temperature below 10ºC or above 40ºC. This is important and
will prevent damage to the battery pack.
Do not incinerate the battery pack even if it is seriously damaged or is completely
worn out. The battery can explode in a fire.
Never attempt to open the battery pack for any reason. If the plastic housing of the
battery pack breaks or cracks, immediately discontinue use and do not recharge.
16. During charging, the battery must be placed in a well ventilated area.
7
Additional Safety Warning for LAWN MOWERS
WARNING! If not used properly this lawn mower can be dangerous! This lawn mower can cause serious injury to the operator and others, the
warnings and safety instructions must be followed to ensure reasonable
safety and efficiency in using this lawn mower. The operator is responsible
for following the warning and safety and instructions in this manual and on
the lawn mower. Never use the mower unless the catcher or guards provided by the manufacturer are in the correct position.
1) Training
•
Read the instructions carefully. Be familiar with the controls and the proper use
of the appliance.
•
Never allow children or people unfamiliar with these instructions to use the appliance. Local regulations may restrict the age of the operator.
•
Never mow while people, especially children, or pets are nearby.
•
The operator or user is responsible for accidents or hazards occurring to other
people or their property.
2) Preparation
•
While mowing, always wear substantial footwear and long trousers.
•
Do not operate the appliance when barefoot or wearing open sandals.
•
Thoroughly inspect the area where the appliance is to be used and remove all
stones, sticks, wires, bones, and other foreign objects.
•
Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades
and bolts in sets to preserve balance.
•
On multi-bladed appliances, take care as rotating one blade can cause other
blades to rotate.
3) Operation
•
Mow only in daylight or in good artificial light.
•
Avoid operating the appliance in wet grass, where feasible.
•
Always be sure of your footing on slopes.
•
Walk, never run.
•
For wheeled rotary mowers, mow across the face of slopes, never up and
down.
•
Exercise extreme caution when changing direction on slopes.
•
Do not mow excessively steep slopes.
•
Use extreme caution when reversing or pulling the appliance towards you.
•
Stop the blade(s) if the appliance has to be tilted for transportation when crossing surfaces other than grass, and when transporting the appliance to and from
the area to be mowed.
•
Never operate the appliance with defective guards or shields, or without safety
devices, for example deflectors and/or grass catchers, in place.
8
Additional Safety Warning for LAWN MOWERS (cont.)
•
Switch on the motor according to instructions and with feet well away from the
blade(s).
•
Do not tilt the appliance when switching on the motor, except if the appliance
has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator. Always ensure that
both hands are in the operating position before returning the appliance to the
ground.
•
Do not put hands or feet near or under rotating parts. For rotary mowers, keep
clear of the discharge opening at all times.
•
Never pick up or carry an appliance while the motor is running.
•
Pull the plug from the socket:
- whenever you leave the machine;
- before clearing a blockage;
- before checking, cleaning or working on the appliance;
- after striking a foreign object. Inspect the appliance for damage and
make repairs as necessary;
- if the appliance starts to vibrate abnormally (check immediately).
4) Maintenance and storage
9
•
Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working
condition.
•
Check the grass catcher frequently for wear or deterioration.
•
Replace worn or damaged parts for safety.
•
For cylinder mowers, be careful during adjustment of the appliance to prevent
entrapment of the fingers between moving blades and fixed parts of the appliance.
ASSEMBLY
Remove the body of the lawn mower from the packaging using the lifting handle (11) and place on a flat
surface (Fig. 1).
Fig. 1
Fitting the Upper Handle to the Lower Handles
1.
Pull up and back on the upper handle ( 2) to raise
the handles into the operating position.
2.
Secure the lower handle with the quick adjustment
knob (7) on both sides by aligning the notch and
tighten in a clockwise direction (Fig. 2).
3.
Secure the upper handle with the tightening of the
handle securing knobs (3).
Fig. 2
Adjusting the height of the upper handle
The upper handle has two height position, to adjust the height
1.
Loosen and remove the handle securing knobs (3)
2.
Select the appropriate height hole on the lower
handle (12). Align the upper handle (2) using either
the lower position or higher position (Fig. 3).
3.
Place the upper handle (2) over the upper ends
of the lower handles (12). Fit the supplied bolts
through the outer side of the upper handle (2) and
then through the holes in the lower handle (12).
4.
Fig. 3
Secure in place by screwing the supplied handle
securing knobs (3) over the protruding ends of the
bolts (Fig. 4).
Fig. 4
10
ASSEMBLY (cont.)
Assembling the Grass Catcher
1.
2.
Assemble the two halves of the grass catcher (5)
together. Align the two halves and push each individual plastic lug into its opposite location. Start at the rear and work your way forward. Ensure that all the plastic lugs engage correctly with a “Click” together around the entire middle
section (Fig. 5).
Fasten the two halves of the grass catcher (5)
together with the screws located as shown in Fig. 6 on either side.
Fig. 5
Fitting and removing the grass catcher
Fig. 6
The grass catcher (5) must be attached to the two raised
hooks on either side of the mower (Fig. 7).
Fig. 7
11
1.
Lift up the grass catcher flap (4) with one hand and
guide the grass catcher (5) with your other hand
over the two raised hooks on either side of the
mower housing (Fig. 8).
2.
Lower the grass catcher (5) and allow it to sit in
place. Lower the grass catcher flap (4).
Fig. 8
WARNING! Before performing any maintenance on cleaning, make
sure the mower battery and safety key are removed from to avoid
accidental starting and possible serious injury.
After emptying the grass catcher (5) ensure the mowers discharge chute is
clear from grass build up before re-assembling the grass catcher (5) onto
the mower.
3.
To empty the grass catcher (5), lift the grass catcher flap (4) with one hand then
lift the grass catcher (5) with the other hand up off the two raised hooks on either
side of the mower.
CHARGING YOUR LITHIUM ION BATTERY
Battery Charging
The Lawn Mowers’ battery (9) has been shipped in a low charge condition, and
requires charging prior to use. Allow several cycles of charging and discharging
(through use of the mower) for the battery (9) to reach its optimum performance / Runtime.
Caution: If the battery is too hot or too cold when inserted into the charger, the
charging LED (2) will flash red. Charging will automatically begin onces the battery
reaches to correct charging temperature.
1.
Connect the charger into a mains power outlet.
2.
The Charger LED (20) will illuminate red showing
power is being supplied to the charger (19).
3.
With the charger (19) sitting flat on a bench/table,
Align the raised ribs on the battery (9) with the recess in the charger (19) and slide onto the charger ensuring a firm connection (see Fig.9).
4.
The charger LED (20) will flash green signifying that
the battery is charging.
5.
A battery takes 3 to 5 hours to become fully charged.
6.
The charger LED (20) will illuminate green once the battery is fully charged.
Fig. 9
Charger LED Indicator
LED Indicator
Situation
RED (illuminated)
Stand By (no battery pack is inserted)
GREEN (Flashing)
Battery is charging
GREEN (Illuminated)
Battery is fully charged
RED (Flashing)
Battery pack is too hot or too cold (charging
will begin automatically when battery reaches
correct charging temperature).
Battery Charge Indicator
The Lawn mower battery (9) is equipped with a battery
charge indicator (18) to show the state of the battery
charge.
•
Press the charge indicator button (17).
•
Look to see which LED lights (see Fig. 10).
1 green LED indicates that the battery (9) requires immediate charging.
2 green LED indicates that the battery (9) has only a low charge and
requires charging soon.
3 green LED indicates that the battery (9) is fully charged.
Note: The battery (9) requires to be removed from the mower to check the state of
charge.
12
OPERATION
Inserting the Battery Pack
Caution: Before inserting the battery (9) ensure the safety
key (15) has been removed to prevent accidental starting
and serious injury.
1.
Lift the securing latch (16) and lift and hold up the battery cover (10) (Fig. 11).
2.
Slide the battery (9) onto the mower by aligning raised ribs on the battery (9) with grooves on the
mower. Ensure the latch on the bottom of the battery
(9) clicks in place and that it is fully seated and secure.
(Fig.12) Fig. 11
Fig. 12
Insert the safety key (15) as shown (Fig. 13). If the mower is not going to be used immediately, do
not insert the safety key (15).
Note:
The safety key (15) must be inserted before the
mower
can be started.
3.
4.
Close the battery cover (10)
Fig. 13
Removing the Battery Pack
1.
Lift the securing latch (16) and lift and hold up the battery cover (10).
2.
Remove the safety key (15).
3.
Lift the securing latch (16) and remove the battery (9) (Fig. 14).
Fig. 14
Adjusting the cutting height
The height adjustment lever (6) provides 5 cutting heights
from 30mm to 80mm.
Pull the height adjustment lever (6) forwards then in to
release lever. Adjust until the required cutting height is
selected (Fig. 15).
CAUTION: Be careful during cutting height adjustments
of the lawn mower to prevent entrapment of the fingers
between moving height adjustment lever (6) and the mover housing.
13
Fig. 15
OPERATION (cont.)
Switching On/Off
To prevent accidental start up of the motor the mower is fitted with a dual action switch.
1.
Press and hold the lock-off button (14) (Fig. 16).
Fig. 16 Pull the Start/stop lever (1) towards the handle and then release the lock-off button (14) (Fig 17).
Note:
There will be a short delay in the motor starting
after engaging the start/stop lever (1).
3. Release the start/stop lever (1) to stop the mower.
2.
Fig. 17
Note: The mower is fitted with a blade brake, this safety feature stops the blade from
rotating within a few seconds.
Mowing Tips
•
While using your lawn mower always wear substantial footwear and long trousers.
•
Make sure the lawn is clear of sticks, stones, wire and debris; they could be
thrown by the blade.
•
Before using the lawn mower and after any impact, check for signs of wear or
damage and repair as necessary.
•
Replace a worn or damaged blade together with the blade bolt to preserve
balance.
•
Do Not Overload the Mower. Mowing long thick grass may cause the motor
speed to drop; you will hear a change in the motor sound. If the motor speed
drops you may overload your lawn mower, which may cause damage. When
mowing in long thick grass first cut with the cutting height set in the highest position, this will help reduce the load. ALWAYS HANDLE THE BLADE WITH
CARE – SHARP EDGES COULD CAUSE SERIOUS INJURY. USE GLOVES.
14
MAINTENANCE
WARNING! Always ensure the lawn mower blade has completely
stopped, remove safety key (15), battery (9) and grass catcher (5) prior to
any maintenance.
Removing the blade (Fig. 18)
CAUTION: ALWAYS HANDLE THE BLADE WITH CARE – SHARP EDGES COULD CAUSE SERIOUS INJURY. USE GLOVES.
1.
To remove the blade bolt, hold the blade firmly and with a 16mm spanner (not supplied) loosen the blade bolt by turning it anti-clockwise.
2.
Remove the blade bolt, washer and blade.
Fig. 18
Fitting the Blade
1.
Place the new blade on the shaft, ensuring the blade is properly seated on the
two blade location points of the blade holder. When seated correctly, the blade
should be flat against the blade holder
2.
Re-assemble blade bolt with washer through the blade and finger tighten.
3.
Tighten the blade bolt with a 16mm spanner (not supplied), by turning in a
clockwise direction. Do not over tighten.
•
Check the catcher frequently for wear or deterioration.
•
Replace worn or damaged parts for safety.
•
Only use the replacement blade & blade bolt specified for this product.
•
Be careful during adjustments of the lawn mower to prevent entrapment of the
fingers between moving blade and fixed parts of the machine.
•
When not in use, the mower should be stored in a dry, frost-free location, out of
reach of children.
•
If the housing of the mower requires cleaning, do not use solvents but a moist
soft cloth and brush only.
Note: Ozito Industries will not be responsible for any damage or injuries caused by
the repair of the tool by an unauthorised person or by mishandling of the tool.
15
TROUBLE SHOOTING
Problem
Possible Cause
Solution
Mower is not starting
Possible clogging
Check underneath the mower
and clear out as necessary
Battery is low in charge
Charge battery
Battery not inserted
properly
Insert battery pack correctly
Grass to long
Raise the cutting height to reduce
starting load
Safety key not inserted
correctly
Fit correctly
Height of cut too low
Raise the cutting height
Cutting blade blunt
Replace the blade
Possible clogging
Check underneath the mower
and clear out as necessary
Grass too high
Raise the cutting height and walk
slower
Grass is dense
Raise the cutting height, walk
slower and cut more frequently
Wet grass
Wait until the grass dries before
mowing
Motor stops while
cutting
Height of cut too low
Raise the cutting height
Battery has no power
Charge battery
Mower is not catching
grass properly
Height of cut too low
Raise the cutting height
Wet grass
Wait until the grass dries before
mowing
Mower is hard to
push
16
SPARE PARTS
Limited spare parts are available subject to availability. Please contact your local Bunnings Special Orders Desk to order the required spare parts.
Most common spare parts listed below
Spare PartPart No.
Battery pack (36V Li-Ion)
ACCLB-036
Charger
ACCLC-036
DESCRIPTION OF SYMBOLS
Read instruction manual
Always keep the lawnmower on the ground when mowing.
Tilting or lifting the lawnmower may cause stones to be thrown out.
Keep bystanders away. Do not mow whilst people especially children
or pets are in the mowing area.
Beware of servering toes or hands. Do not put hands or feet near
a rotating blade.
Blade continues to rotate after the machine is switched off. Wait until all
machine components have completely stopped before touching them.
Do not expose the lawn mower or charger to rain.
17
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed
of with household waste but in an environmentally friendly way.
Please recycle where facilities exist. Check with your local council
authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
CONTENTS
1 x Cordless Lawn Mower LML-036 1 x Battery (36V Lithium Ion)
1 x Charger
1 x Catcher top
1 x Catcher bottom
1 x Safety key
1 x Instruction manual
OZITO INDUSTRIES PTY LTD
AUSTRALIA (Head Office)
1 - 23 Letcon Drive, Bangholme, Victoria, Australia 3175
Telephone: 1800 069 486
Facsimile: +61 3 9238 5588
Website: www.ozito.com.au
Email: enquiries@ozito.com.au
18
WARRANTY
YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER
TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT.
PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
`Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
2 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 24 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes consumable parts, for example:
Blade. Lithium Ion batteries are covered by a 12 month warranty.
WARNING
The following actions will result in the warranty being void.
•
•
•
•
•
Professional, Industrial or high frequency use.
If the tool has been operated on a supply voltage other than that specified on the tool.
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175
OW10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising