CT20088064, Owner’s Manual">
User’s Guide
L1730SF
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the back cover and quote this information to your
dealer when you require service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the pro duct screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Positioning your display
1. Remove the tape.
<Image 2>
<Image 1>
Put the set as the
picture below
<Image 1> to
remove the tape.
Do not remove the tape
with the set up side
down as the <Image 2>
The base part may
spring up to injure your
hand.
2. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -20˚~140˚
140˚
-20˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
Height Range : maximum 2.41inch (61.3mm)
Landscape & Portrait : You can rotate the panel 90o clockwise.
(* For detailed information, please refer to the Pivot Sofeware CD provided.)
* Make sure not to
touch the floor
when the head
rotates to use the
Pivot function.
A3
Connecting the Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cord into a proper power outlet that is easily accessible and
close to the display.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Power Cord
Signal Cable
D-sub
Wall-outlet type
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.
3. Press
button on the front switch panel to turn the
power on. When monitor power is turned on, the 'Self
Image Setting Function' is executed automatically.
(Only analog mode)
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When
the user connects the monitor for the first time, this function automatically adjusts the display to
optimal settings for individual input signals.
‘SET/AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
SET/AUTO function button to improve resolution.
A4
Connecting the Display
To Use Touch Screen
Select and Install the driver CD provided.
Make sure you have the
driver installation CD
bundled with the product.
ITM DRIVER
1) Insert the driver installation CD for the ITM touch screen.
2) See the touch screen software installation CD for more
information and assistance.
3) Connect the USB cable or the RS-232C cable for the touch screen
after the driver installation.
* The software drivers support the following Microsoft Windows
operating systems: Windows 95, 98, ME, 2000, XP and NT 4.0.
Hantouch DRIVER
1) Connect the USB cable or the RS-232C cable for touch screen before
installing the driver.
2) Insert the Hantouch touch screen driver installation CD.
3) Open the [My Computer] -> [LG Driver] -> [Drivers] folder, then select the
driver appropriate for your OS.
4) For more information, see the installation manual in the touch screen
software installation CD bundled with the product.
* The software drivers support the following Microsoft Windows operating
systems: Windows 95, 98, ME, 2000, XP and NT 4.0.
For more information about installation for other OS, see the driver
installation CD.
* Do not select "install PS/2 interface driver" while
installing the touch screen driver for the Hantouch.
A5
Connecting the Display
< USB cable for the touch screen >
Power
Cord
Touch
Screen
USB
Signal
Cable
RS-232C
Touch Screen
USB
< RS-232C cable for the touch screen >
Power
Cord
Touch
Screen
RS-232C
Signal
Cable
RS-232C
Touch Screen
RS-232C
NOTE
Your purchased product and its accessories may look different from the items
illustrated in this manual.
A6
Control Panel Functions
Front Panel Controls
MENU
-
+
SET/AUTO
Bottom
Control
Function
MENU Button
Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for 5 seconds. The
message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for 5 seconds. The message "OSD
UNLOCKED" should appear.
- +
Buttons
Use these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A14.
A7
Control Panel Functions
Control
SET/AUTO
Button
Function
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the SET/AUTO button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1280x1024
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up green when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
A8
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
MENU
-+
SET/AUTO
-+
MENU
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the - or + Buttons. When the icon you want
becomes highlighted, press the SET/AUTO Button.
Use the - / + Buttons to adjust the image to the desired level. Use the
SET/AUTO Button to select other sub-menu items.
Push the MENU Button once to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
Automatic save
With the OSD open, once you have made an adjustment the monitor
automatically save any adjustments you have made, even if you exit the menu
or open another menu. If you make an adjustment and then wait for the
OSD to disappear, the adjustment will also been saved.
A9
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
PICTURE
Sub menu
Reference
To adjust the brightness,
contrast and gamma of the
screen
BRIGHTNESS
CONTRAST
GAMMA
COLOR
PRESET sRGB
To customize the color of the
screen
6500K
9300K
RED
GREEN
BLUE
POSITION
HORIZONTAL
To adjust the position of the
screen
VERTICAL
TRACKING CLOCK
PHASE
To improve the clarity and
stability, sharpness of the
screen
SHARPNESS
SETUP
LANGUAGE
HORIZONTAL
OSD
POSITION VERTICAL
To customize the screen
status for a user's operating
environment
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
SET ID
FLATRON
F-ENGINE
MOVIE / TEXT
To select or customize
desired image settings
USER
NORMAL
: Adjustable
NOTE
The order of icons may differ depending on the model (A10~A14).
A10
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
PICTURE
Sub-menus
Icons
Button Tip
MENU
: Exit
+
:
Adjust
(Decrease/Increase)
SET
: Enter
: Select another sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A11
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
PICTURE
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU : Exit
- : Decrease
+ : Increase
SET : Select another sub-menu
COLOR
PRESET
Select the screen color.
• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
COLOR
Set your own green color levels.
GREEN
MENU : Exit
BLUE
- : Decrease
+ : Increase
SET : Select another sub-menu
Set your own blue color levels.
POSITION
POSITION
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
MENU : Exit
- : Decrease
+ : Increase
SET : Select another sub-menu
A12
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
TRACKING
MENU : Exit
SHARPNESS To adjust the clearness of the screen.
- : Decrease
+ : Increase
SET : Select another sub-menu
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the + button to reset immediately.
SET ID
You can assign a unique SET ID NO
(name assignment) to each monitor when
several monitors are connected for display.
Specify the number (0 ~ 99) using the -, +
button and exit. Use the assigned SET ID
to individually control each monitor using
the Monitor Control Program.
SETUP
SETUP
MENU
-
+
SET
SETUP
MENU
-
+
MENU : Exit
- : Adjust
+ : Adjust
SET : Select another
sub-menu
SET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when the input
signal is an analog signal.
A13
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you press the
front of the monitor.
button on the
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when applied
Screen when not applied
When you execute F-ENGINE, two tone will appear
on the screen as shown in the picture. The applied
screen will appear on the left side, whereas the nonapplied screen will appear on the right side.Press the
SET button to use the adjusted screen.
Main menu
Sub menu
Description
MOVIE This feature lets you easily select the best image
TEXT setting, which is optimized to the environment
(ambient illumination, image types, etc.).
MOVIE: For animation images in videos or movies.
MENU : Exit
- , + : Move
SET : Select
TEXT: For text images (Word processing, etc.)
USER
To adjust the USER sub-menu function,
Press the SET Button
USER
BRIGHTNESS
User
You can manually adjust the brightness, ACE or RCM.
You can save or restore the adjusted value even
when in a different environment.
...
(Brightness): Adjusts screen brightness.
...ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
...RCM (Real Color Management): Selects the color mode.
0
ACE
1
1
RCM
2
2
3
SAVE
Not applied
Green enhanced
Flesh tone
Color Enhanced
MENU
SET
Select the SAVE sub-menu using the SET button
MENU : Exit
and save the YES value using the buttons.
- : Decrease
+ : Increase
SET : Select another sub-menu
NORMAL This is under normal operating conditions.
A14
Troubleshooting
Check the following before calling for service.
No image appears
Is the power cord of the
display connected?
Check and see if the power cord is connected
properly to the power outlet.
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator blue or
green?
Adjust the brightness and the contrast.
Is the power indicator
amber?
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
Try to turn on the PC.
Do you see an "OUT
OF RANGE" message
on the screen?
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
Do you see a "CHECK
SIGNAL CABLE
"message on the
screen?
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
Do you see “OSD
LOCKED” when you
push MENU button?
You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for 5 seconds.
The message "OSD UNLOCKED" should
appear.
A15
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
Press the SET/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the screen
background, vertical
bars or stripes are
visible.
Press the SET/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
Press the SET/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
The screen color is
mono or abnormal.
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true
color) at Control Panel - Settings.
The screen blinks.
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
A16
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
Make sure to check if the video card supports
Plug&Play function.
Touch screen does not work.
Did you install the
touch screen driver?
Install the touch screen driver on the
installation CD bundled with the product.
Make sure that the USB cable or
the RS-232C cable for touch screen is
connected to your PC.
Make sure your PC and accessories are
USB-enabled or support RS-232C.
A17
Specifications
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
(with tilt stand)
Tilt Range
Power Input
Environmental
Conditions
Tilt Stand
Power cord
17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 43.2 cm
0.264 mm pixel pitch
Horizontal Freq. 30 - 83kHz (Automatic)
Vertical Freq.
56 - 75Hz (Automatic)
Input Form
Separate Sync, Positive / Negative
Composite Sync, Positive / Negative
SOG (Sync On Green)
Signal Input
15 pin D-Sub Connector
Input Form
RGB Analog (0.7Vp-p/75ohm)
Max
VESA 1280 x 1024@75Hz
Recommend
VESA 1280 x 1024@60Hz
DDC 2B
On Mode
: 35W
≤ 2W
Sleep Mode
≤ 1W
Off Mode
Full Up Position
Folded Position
Width
39.80 cm / 15.67 inches 39.80 cm / 15.67 inches
Height
39.00 cm / 15.35 inches 11.76 cm / 4.63 inches
Depth
22.80 cm / 8.98 inches 32.90 cm / 12.95 inches
Net
6.7 kg (14.77 lbs)
Tilt Range
-20˚~140˚ (Head)
Height Range
2.41inch (61.3mm)
Rotate
90˚ clockwise
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached( ), Detachable ( O )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A18
Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
13
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
Horizontal Freq. (kHz)
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
Vertical Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
*Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
green
amber
off
A19
Controlling the Multiple Monitors
Use this method to connect several monitors to a single PC.
You can control several monitors at a time by connecting them to a single PC.
Connecting the cable
Connect the RS-232C cable as shown in the picture.
* The RS-232C protocol is used for communication between the PC and monitor.
You can turn the monitor on/off, select an input source or adjust the OSD menu
from your PC.
< RS-232C Distributor- (Not included) >
0utput
Input
0utput
0utput
0utput
PC
RS-232C Configurations
3-Wire Configurations (Not Standard)
7-Wire Configurations (Standard RS-232C cable)
PC
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
PC
Monitor
2
3
5
4
6
7
8
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Male)
Communication Parameter
Baud Rate : 9600bps (UART)
Data Length : 8bits
Parity Bit : NONE
Stop Bit : 1bit
Flow Control : NONE
Use a straight cable
A20
Monitor
2
3
5
4
6
7
8
D-Sub 9
(Male)
TXD
RXD
GND
DSR
DTR
CTS
RTS
Controlling the Multiple Monitors
Command Reference List
COMMAND1
01. Power
02. Contrast
03. Brightness
04. Color
COMMAND2
k
k
k
k
a
g
h
u
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command.
* [Command 2]: Second command.
* [Set ID]: You can adjust the set ID to choose desired monitor
ID number in Setup menu. Adjustment range is
0~ 99. When selecting Set ID ‘0’, every connected
monitor set is controlled. Set ID is indicated as decimal
(0~99) on menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0x0D’
* [ ]: ASCII code Space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from non-viable
functions or communication errors.
Data 1: Illegal Code
2: Not supported function
3: Wait more time
A21
DATA(Hexa)
0, 1
0 - 64
0 - 64
0, 2
Controlling the Multiple Monitors
Transmission / Receiving Protocol
Power On (Command:a)
To control Power On/Off of the monitor.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Contrast (Command:g)
To adjust screen contrast.
You can also adjust contrast in the Contrast/Brightness menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
A22
Controlling the Multiple Monitors
Transmission / Receiving Protocol
Brightness (Command:h)
To adjust screen brightness.
You can also adjust brightness in the Contrast/Brightness menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
Color (Command:U)
To adjust the screen color.
You can also adjust color in the Color adjustment menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : User
1 : 6500K
2 : 9300K
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
A23
How to Install the VESA Standard wall mounting
VESA wall mounting
Connected to another object
(stand type and wall-mounted type.
This monitor accepts a VESA-compliant
mounting interface pad.- optional)
For further information, refer to the
VESA Wall Mounting Instruction Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately at most
computer stores
A24
Digitally yours
Download PDF

advertising