Supermicro SuperChassis 832S-R760B, Black, SuperChassis 832T-650B, Black, SuperChassis 832S-550B, Black, SuperChassis 833S-R760, Beige, SuperChassis 833S2-550B, Black, SuperChassis 832T-R760, Beige, SuperChassis 833S2-550, Beige, SuperChassis 832T-550B, Black, SuperChassis 832T-550, Beige, SuperChassis 833T-653B Datasheet

Supermicro SuperChassis 832S-R760B, Black, SuperChassis 832T-650B, Black, SuperChassis 832S-550B, Black, SuperChassis 833S-R760, Beige, SuperChassis 833S2-550B, Black, SuperChassis 832T-R760, Beige, SuperChassis 833S2-550, Beige, SuperChassis 832T-550B, Black, SuperChassis 832T-550, Beige, SuperChassis 833T-653B Datasheet
®
SUPER
R
!
2
1
MUTE
SC832/SC833 CHASSIS
USER'S GUIDE
1.0a
RESET
SUPER SC832/SC833 Chassis User’s Guide
The information in this User’s Guide has been carefully reviewed and is believed to be
accurate. The vendor assumes no responsibility for any inaccuracies that may be
contained in this document, makes no commitment to update or to keep current the
information in this manual, or to notify any person or organization of the updates. Please
Note: For the most up-to-date version of this manual, please see our
web site at www.supermicro.com.
SUPERMICRO COMPUTER reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated
or reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE
LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of
Santa Clara shall be the exclusive venue for the resolution of any such disputes.
Supermicro's total liability for all claims will not exceed the price paid for the hardware
product.
Unless you request and receive written permission from SUPER MICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2004 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
1-2
Chapter 1: Safety Information and Technical Specifications
Table of Contents
Chapter I: Safety Information and Technical Specifications .......... 1-4
1-1. Electrical Safety Guidelines ............................................................. 1-4
1-2. General Safety Guidelines ............................................................... 1-5
1-3. ESD Safety Guidelines ....................................................................... 1-6
1-4. Operation Safety Guidelines .......................................................... 1-6
1-5. Product Compliance Information ................................................. 1-8
1-6. Packing List and
the SC832/SC833 Specifications ............... 1-9
Chapter 2: Chassis Description and Installation Procedures ........ 2-1
2-1. Chassis Description ........................................................................... 2-1
A. Contents of the Accessory Kit ............................................................... 2-1
B. Chassis Front View and the Front Control Panel ................................ 2-2
C. Chassis Rear View and the Back Panel .............................................. 2-4
2-2. Chassis Installation ........................................................................... 2-6
A. Important Safety Guidelines ..................................................................... 2-6
B. Tools Needed .............................................................................................. 2-6
C. Accessing the SCA Drive Tray and Installing a HDD .......................... 2-7
D. Removing the Top Cover of the Chassis ............................................... 2-8
E. Accessing the Front Chassis Fans ........................................................ 2-9
F. Accessing the Power Supply ................................................................ 2-10
G. Installing the Air Shrouds ....................................................................... 2-13
H. Installing the Motherboard ...................................................................... 2-15
I. Installing Chassis Rails ............................................................................ 2-17
J. Rack Installation ....................................................................................... 2-19
1-3
SUPER SC832/SC833 Chassis User’s Guide
Chapter 1-Safety Information and Technical
Specifications
1-1 Electrical Safety Guidelines
Warning: To avoid electrical shock,
cords as follows:
check the power
Checking the Power Cords
zUse the exact type of power cords as required.
zBe sure to use power cord(s) that came with safety certifications.
zThe power cord(s) must be compliant with the AC voltage requirements in your
region.
zThe power cord plug cap must have an electrical current rating that is at least
125% of the electrical current rating of this product.
zThe power cord plug cap that plugs into the AC receptacle on the power
supply must be an IEC 320, sheet C13, type female connector.
zBe sure to disconnect the power supply before accessing the SC832/SC833
or its components.
zPlug the Power cord(s) into a socket that is properly grounded before
turning on the power.
Warning: Follow the guidelines below to avoid possible
damages to the system or injury to yourself:
General Electrical Safety Guidelines
z Be aware of the locations of the power switches on the chassis and in the
room, so you can disconnect the power supply if an accident occurs.
z Take extra precautionary measures when working with high voltage
components. It is not recommended to work alone.
z Before removing or installing main system components, be sue to disconnect
the power first. Turn off the system before you disconnect the PS.
Use only one hand when working with powered-on electrical equipment to
avoid possible electrical shock.
1-4
Chapter 1: Safety Information and Technical Specifications
Use rubber mats specifically designed as electrical insulators when working
with computer systems.
The power supply or power cord must include a grounding plug and must
be plugged into grounded outlets.
Motherboard Battery: CAUTION -Make sure not to install the onboard battery
upside down to avoid possible explosion. Make sure that the positive side
should be facing up on the motherboard. This battery must be replaced
only with the same or an equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
CD-ROM Laser: CAUTION - Do not open the enclosures of power supplies
or CD ROM to avoid injury.
1-2 General Safety Guidelines
Warning: Follow these rules to ensure general safety:
Keep the area around the SC832/SC833 clean and free of clutter.
To avoid injuries to the back, be sure to use your leg muscles, keep your
back straight, and bend your knees, when lifting the system.
After removing the components or chassis covers from the system, place
them on a table for safeguard.
Avoid wearing loose clothing to preventing it from coming into contact with
Be sure to remove any jewelry or metal objects before working on the
chassis to avoid short circuits should these objects come into contact
with power circuits.
After accessing the interior of the chassis, be sure to close the chassis
with chassis covers and secure the chassis to the racks with screws.
1-5
SUPER SC832/SC833 Chassis User’s Guide
1-3 ESD Safety Guidelines
Electric Static Discharge (ESD) can damage electronic components. To prevent damage to your system board, it is
important to handle it very carefully. The following measures are
generally sufficient to protect your equipment from ESD.
Use a grounded wrist strap designed to prevent static discharge.
Keep all components and printed circuit boards (PCBs) in their antistatic
bags until ready for use.
Touch a grounded metal object before removing the board from the antistatic bag.
Do not let components or PCBs come into contact with your clothing, which may
retain a charge even if you are wearing a wrist strap.
Touch a grounded metal object before removing the board from the antistatic
bag.
Handle a board by its edges only; do not touch its components, peripheral
chips, memory modules or contacts.
When handling chips or modules, avoid touching their pins.
Put the motherboard and peripherals back into their antistatic bags when not in
use.
For grounding purposes, make sure your computer chassis provides excel
lent conductivity between the power supply, the case, the mounting
fasteners and the motherboard.
1-4 Operation Safety Guidelines
Warning: For proper cooling, make sure to install all
chassis covers before turning on the system. If this rule is
not strictly followed, warranty may become void. Do not open
the casing of a power supply. Power supplies can only be
accessed and serviced by a qualified technician of the manufacturer.
1-6
Chapter 1: Safety Information and Technical Specifications
To avoid personal injury and property damage, please carefully
follow all the safety steps listed below:
Before accessing the chassis:
1. Turn off all peripheral devices connected to the SC832/SC833.
2. Press the power button to power off the system.
3. Unplug all power cords from the system or the wall outlets.
4. Disconnect all the cables and label the cables for easy identification.
5. Use a grounded wrist strap designed to prevent static discharge when
handling components.
Removing the chassis covers:
After completing the above steps, you can remove the covers and install
components/peripheral devices into the chassis as described in Chapter 2.
1. Unlock and remove the screws and fasteners to remove the cover or
components.
2. Save all the screws and fasteners for later use. (If necessary, label these
screws or fasteners for easy identification.)
3. Follow the instruction given in Chapter 3 to remove the chassis covers.
Reinstalling the chassis covers:
To maintain proper system cooling and airflow, do not operate the system
without installing all chassis covers back to the chassis. To reinstall the chassis
covers, please follow the steps listed below:
1. Make sure that all components and devices are securely fastened
on the chassis and there are no loose parts/screws inside the chassis.
2. Make sure that all cables are properly connected to the connectors and ports.
3. Use the original screws or fasteners to install the covers to the chassis.
4. Be sure to lock to the chassis or the system to prevent unauthorized access.
5. For proper cooling, enclose the chassis with covers before operating the
system.
1-7
SUPER SC832/SC833 Chassis User’s Guide
Before installing the chassis into a rack:
1. Make sure that the rack is securely anchored onto a unmovable surface or
structure before installing the chassis into the rack.
2. Unplug the power cord(s) of the rack before installing the chassis into the
rack.
3. Make sure that the system is adequately supported. Make sure that all the
components are securely fastened to the chassis toprevent components falling off from the chassis.
4. Be sure to install an AC Power Disconnect for the entire rack assembly and
this Power Disconnect must be clearly marked.
5. The rack assembly shall be properly grounded to avoid electric shock.
6. The rack assembly must provide sufficient airflow to the chassis for proper
cooling.
1-5 Product Compliance Information
The SC832/SC833 Chassis is compliant with the following safety
standards/requirements:
Product Safety
*Canada/USA--UL60 950-CSA60 950
*European Union--EN 60 950
*International--IEC 60 950
Electromagnetic Compatibility (EMC)-Emissions
*European Union--EN55022: 1994
*International--CISPR 22
*USA--Title 47 CFR, Part 15
Electromagnetic Compatibility-Immunity
*European Union--EN55024: 1998
*International--CISPR 24
Power Line Harmonics/Voltage Flicker
*European Union--EN61000-3-2/EN61000-3-3
*International--IEC61000-3-2
1-8
Chapter 1: Safety Information and Technical Specifications
1-6 Packing List and the SC832/SC833 Specifications
A. The SC832/SC833 chassis contains the following:
The SC832 chassis:
&RPSRQHQW
6&$´'ULYH7UD\V
PP+RW6ZDS&KDVVLV)DQ PP5HDU&KDVVLVIDQ
7ULSOH5HGXQGDQW:3RZHU6XSSO\
3RZHU6XSSO\3RZHU'LVWULEXWRU
:3RZHU6XSSO\
SRUW6$7$%DFNSODQH6&72QO\
SRUW6&6,%DFNSODQH6&62QO\
)ORSS\'ULYH
&'520'ULYH
The SC833 chassis:
&RPSRQHQW
6&$´'ULYH7UD\V
PP+RW6ZDS&KDVVLV)DQ PP5HDU&KDVVLVIDQ
)DQ6KURXG6HWV
7ULSOH5HGXQGDQW:3RZHU6XSSO\
3RZHU6XSSO\3RZHU'LVWULEXWRU
:3RZHU6XSSO\
SRUW6$7$%DFNSODQH6&72QO\
SRUW6&6,%DFNSODQH6&62QO\
)ORSS\'ULYH
&'520'ULYH
1-9
4XDQWLW\
2SWLRQDO
2SWLRQDO
3DUW1XPEHU
&6(37%
)$1
)$1
3:60:
&6(373':
3:6:
&6(6$7$
&6(6&$6
)3'7($&%
&'07($&%
4XDQWLW\
2SWLRQDO
3DUW1XPEHU
&6(37%
)$1
)$1
&6(37
&6(37
3:60:
&6(373':
3:6:
&6(6$7$
&6(6&$6
)3'7($&%
&'07($&%
SUPER SC832/SC833 Chassis User’s Guide
B. The Accessory Box and the Rail Packaging contain the
following:
The Accessory box contains the following:
&RPSRQHQW
$&3RZHU&RUGV
0RWKHUERDUG6FUHZVDQG6WDQGRIIV
+''6FUHZV
:UHQFK
4XDQWLW\
:
:
VHW
VHW
C. The Rail Packaging contains the following:
Rail Packaging contains:
&RPSRQHQW
5DFN5DLO$VVHPEO\
)URQW%UDFNHWVIRU0RXQWLQJ5DFN5DLO
5HDU%UDFNHWVIRU0RXQWLQJ5DFN5DLO
0RXQWLQJ6FUHZV
4XDQWLW\
VHWV
VHW
D. The Power Supply Specifications of the SC832/SC833
Power supply spec
Mfr. model#
Mfr. part #
Rated AC input voltage
Rated input frequency
Rated input current
Rated output power
Maximum rated BTU
Nominal DC output
+3.3V
+5V
+12V
-5V
-12V
+5Vsb
760W series
3 x SP382-TS
3 x PWS-0050M
100-240V AC
50-60 Hz
14A (115V)
7A (230V)
760W
4350 BTUs/Hr
550W Series
SP550
PWS-0047
100-240V AC
50-60 Hz
9A(115V)
4.5A(230V)
550W
2910 BUTs/Hr
36A
36A
50A combined
n/a
1A
3.5A
30A
35A
34A
0.8A
1A
2A
(*Note: When connecting the 760W Power Supply to the Drive
Backplane, be sure to use the connectors marked "PD" and "PG",
colored in yellow/green stripes.)
1-10
Chapter 1: Safety Information and Technical Specifications
E. The Serial ATA Back Panel (*SC832/SC833T Only)
E-1 Jumper Settings and Pin Definitions
-XPSHUV 'HIDXOW6HWWLQJV
1RWHV
$
-3
2SHQ
%X]]HU5HVHW1RWH%HORZ
%
-3
2YHUKHDW7HPSHUDWXUHDW&
&
-3
2SHQ
&RPPRQ$FW,QDQG$FW,Q
'
-3
&ORVHG
)DQ(QDEOHG6HQVH
(
-3
&ORVHG
)DQ(QDEOHG6HQVH
)
-3
&ORVHG
)DQ(QDEOHG6HQVH
1RWH3UHVVWKHEXWWRQRQWKHIURQWSDQHORQFHWRGLVDEOHWKHEX]]HU,IWKH
EX]]HUKDVEHHQGLVDEOHGSOHDVHEHVXUHWRSUHVVWKHEXWWRQRQFHDJDLQWR
UHHQDEOHWKHEX]]HU
E-2 Jumper Setting Locations
A
SUPER
SATA833
B
BUZZER RESET
JP25
FAN#1
JP26
JP62
JP63 FAN#3
F
JP61
FAN#2
E
C
D
(*Note: When connecting the 760W Power Supply to the Drive
Backplane, be sure to use the connectors marked "PD" and "PG",
colored in yellow/green stripes.)
1-11
SUPER SC832/SC833 Chassis User’s Guide
F. The SCSI Back Panel (*SC832/SC833S Only)
F-1 Jumper Settings and Pin Definitions
-XPSHUV 'HIDXOW6HWWLQJV
1RWHV
$
-3
2SHQ
%X]]HU5HVHW1RWH%HORZ
%
-3
&ORVHG
)DQ2Q6HQVH
&
-3
&ORVHG
)DQ2Q6HQVH
'
-3
&ORVHG
)DQ2Q6HQVH
1RWH3UHVVWKHEXWWRQRQWKHIURQWSDQHORQFHWRGLVDEOHWKHEX]]HU,IWKH
EX]]HUKDVEHHQGLVDEOHGSOHDVHEHVXUHWRSUHVVWKHEXWWRQRQFHDJDLQWR
UHHQDEOHWKHEX]]HU
F-2 Jumper Setting Locations
A
BUZZER RESET
SUPER
D FAN#3
JP43
C
FAN#2
JP42
B
SCA833S
FAN#1
JP41
(*Note: When connecting the 760W Power Supply to the Drive
Backplane, be sure to use the connectors marked "PD" and "PG",
colored in yellow/green stripes.)
1-12
Chapter 1: Safety Information and Technical Specifications
F-3 SCSI (Super) GEM Driver Installation (*for Windows OS)
(*Note: This driver is not necessary for other Operating Systems. If
you have two SCA backplanes, you will need to install the driver
twice.)
The driver is located on the Super Micro motherboard driver CD or is
available for download from our FTP site: ftp://ftp.supermicro.com/driver/
Qlogic/
Follow the procedure below to install this driver to your system.
Installing
the driver:
1) Right click on “My Computer” and choose “Property”.
2) Select “Hardware” tab and click on “Device Manager”.
3) Open “Other Devices” or wherever “GEM318” is on.
4) Right click on this device and choose “Property”.
5) Click on “Driver” tab and choose “Update Driver”.
6) Click “Next” 2 times, uncheck both “Floppy disk drives” and “CD-ROM
drives”. Then, select the item- “Specify a location,” and choose “Next”.
7) Click on “Browse” and choose D drive or wherever Supermicro Setup
CD is in.
8) Choose “Qlogic” folder and click on “Open”.
9) System will automatically detect GEM318 and install the drive from this
point on.
or,
1) Right click the "My Computer" icon on your desktop and choose
Properties.
2) Click on the Hardware tab and click on "Device Manager" to bring up
the list of system devices.
3) You may see one or two yellow question marks (?) that read QLogic
GEM354 or GEM318 SCSI Processor Device. Right click on these, and
choose to uninstall. If two such question marks are present, uninstall
both.
4) Click on Action tab and choose "Scan for Hardware Changes". The
Hardware Wizard program should start up. Click "Next".
5) At the first prompt, choose “Display a list of known device drivers for
the device so that I can choose a specific driver” and click "Next".
6) Choose “Other Devices” and click Next.
7) Choose “Have Disk”, and specify your floppy drive location in the
options box. Then, click "Next".
8) Highlight “Enclosure Services Device” and click "Next".
9) Ignore the warning prompt by clicking "Yes".
1-13
SUPER SC832/SC833 Chassis User’s Guide
Notes
1-14
Chapter 2: Chassis Description and Installation Instructions
Chapter 2: Chassis Description and Installation
Instructions
2-1 Chassis Description
A. Contents of the Accessory Kit:
The following items are included in the Accessory Kit:
M/B
HDD
B
A
C
B. Flat head 6-32 x 5 mm [0.197]
A. Pan head w/ lock
6-32 x 4.5 mm [0.177]
C. Thumb screw 6-32 x 5 mm [0.197]
DRIVE
B
D
B. Flat head 6-32 x 5 mm [0.197]
E
E. Round head M3 x 5 mm [0.197]
D. Pan head 6-32 x 5 mm [0.197]
RAIL
F
F.
G
H
H. Flat head M5 x 12 mm [0.472]
Flat head M4 x 4 mm [0.157]
I.
G. Round head M4 x 4 mm [0.157]
M/B STANDOFF
J
J.
I
K
M/B standoff, 6-32 to 6-32
K. M/B (CPU) standoff, M5 to 6-32
2-1
Washer for M5
SUPER SC832/SC833 Chassis User’s Guide
B. Chassis Front View and the Front Control Panel
!
R
2
1
MUTE
A
B
RESET
C
Chassis Front Panel
Front Panel I/O Device Definitions
A. SCA Drive Trays(8)
B. Floppy Disk(1)
C. 5.25" Drive Bays(2)
!
1
2
MUTE
L
K
J
I
H
F
G
RESET
E
D
(*Note)
LED Panel
(*Note: After the Alarm goes off, please press the Alarm Reset button to
reactivate the function.)
LED Button Definitions
D. Power Button
E. Reset
F. Alarm Reset (*Note)
G. Power Indicator
H. HDD Activity
I. LAN1
J. LAN2
K. Overheat
L. System Alert/Power Failure
2-2
Chapter 2: Chassis Description and Installation Instructions
LED Button Descriptions
/('%XWWRQ
3RZHU
&RORU
*UHHQ
+''
$PEHU
/$1/$1 *UHHQ
2YHUKHDW
5HG
6\VWHP$OHUW 5HG
3RZHU)DLOXUH &RQGLWLRQ
2Q
2II
%OLQN
2II
2Q
%OLQN
2II
2Q
2II
2Q
2II
'HVFULSWLRQ
6\VWHP2Q
6\VWHP2II
+''$FWLYLW\
1R$FWLYLW\
/LQNHG
/$1$FWLYLW\
'LVFRQQHFWHG
6\VWHP2YHUKHDW
6\VWHP1RUPDO
RUPRUH3:5PRGXOHVIDLOXUH
6\VWHP1RUPDO
2-3
SUPER SC832/SC833 Chassis User’s Guide
C. Chassis Rear View and the Back Panel
C
A
B
D
SC832/SC833 Chassis Rear View
Back Panel Devices
A. Power Supply Modules (3) (*760W only)
B. Back Panel I/O Ports
C. Rear System Fan Slots(2)
D. Full size PCI Expansion Slots (6)
I
E
F
G
H
*I/O Back Panel
Back Panel I/O Port Definitions
E. Keyboard & Mouse
F. USB Ports
G. COM/Video Ports
H. LAN1 & LAN2
I. Parallel Port
(*Note: The actual I/O Configuration of your system might be different
from the one shown above.)
2-4
Chapter 2: Chassis Description and Installation Instructions
Power Module LED Descriptions
3RZHU0RGXOH/('
&RORU&RQGLWLRQ
*UHHQ
$PEHU
2II
2-5
'HVFULSWLRQ
3RZHU6XSSO\'&2Q
3RZHU6XSSO\6WDQGE\
1R$&3RZHUWRWKHV\VWHP
SUPER SC832/SC833 Chassis User’s Guide
2-2 Chassis Installation
A. Important Safety Guidelines
Stop
This product shall only be accessed, assembled and serviced
by technically qualified personnel or technicians.
To avoid personal injury and property damage, please read all the information
provided in Chapter 1, and carefully follow all the Safety Guidelines listed before
accessing or servicing the SC832/SC833 or its components. For your convenience,
some Safety Steps are also listed below:
Safety Steps
Before accessing the chassis:
1. Turn off all peripheral devices and turn off the power supply connected to the
SC832/SC833.
2. Unplug all power cords from the system or the wall outlets.
3. Disconnect all the cables and label the cables for easy identification.
4. Use a grounded wrist strap designed to prevent static discharge when handling components.
Removing the chassis covers:
After completing the above steps, you can remove the chassis covers and install
components and devices into the chassis as described in this chapter.
1. Unlock and remove the screws and fasteners to remove the cover or components.
2. Save all the screws and fasteners for later use. (If necessary, label these screws
or fasteners for easy identification.)
3. Follow the instructions given in this chapter to remove the chassis covers.
B. Tools needed
1. Fillips Screw Driver
2. Antistatic Strap
2-6
Chapter 2: Chassis Description and Installation Instructions
C. Accessing the SCA Drive Tray and Installing a HDD
To install the SCA drive into the chassis, you need to first remove the SCA drive
tray from the chassis.
Procedures
1. Press the release tab located on the drive tray door to release the drive tray
from its locking position as shown below:
2a
2b
1
2. Pull the drive tray door upward and then pull the SCA drive tray out from the
chassis.
3. Mount a hard drive in the drive tray as shown below:
3a
3b
2-7
SUPER SC832/SC833 Chassis User’s Guide
D. Removing the Top Cover of the SC832/SC833 Chassis
Before installing any components, replacing chassis fans or accessing the
motherboard, you will first need to remove the top cover.
Procedures
1. Press the release tabs to release the cover from its locking position.
1
2
2. Once the top cover is released from its locking position, push the cover toward
the rear side and slide it out from the chassis.
2-8
Chapter 2: Chassis Description and Installation Instructions
E. Accessing the Front Chassis Fans
Procedures
1. Press the release tab located on the left side of the front chassis fan (when
facing the front side of the fan) to release the chassis fan from its locking
position as shown in the picture below:
1
2
2. Once you've loosened the front chassis fan, you can pull the fan out.
2-9
SUPER SC832/SC833 Chassis User’s Guide
F-1. Accessing the 760W Power Supply (*For Triple Redundant
Power Supply-3xPWS-0050M)
(*Caution: Unplug the Power Cord before removing the Power
Supply!!)
Procedures
1. Locate the release tab on the left side of the power supply.
2. Push the release tab to the right to release the power supply from its locking
position as shown below:
1
3
2
3. Once the power supply module is released from its locking position, remove
it from the chassis.
!
Warning: Do not open the casing of a power supply.
Power supplies can only be accessed and serviced by a
qualified technician from the manufacturer.
2-10
Chapter 2: Chassis Description and Installation Instructions
F-2. Accessing the 550W-Power Supply (*For Single PWS-0047)
(*Caution: Unplug the Power Cord before removing the Power
Supply!!)
Procedures
1. Unscrew the screws to remove the metal plate.
2. Remove the four screws from the power supply.
3. Pull the power supply out from its housing as shown in the picture:
(PWS-0047)
2
1
3
2-11
SUPER SC832/SC833 Chassis User’s Guide
G. Installing the Air Shrouds
!
Warning: For proper cooling, please be sure to install the air shroud
and all the chassis covers before you operate the system.
The SC832/833 chassis and the locations of the Large and Small Air
Shrouds
AAa
C
The Back View of the
Front Fan#1
A
E
B
D
E
A. Large Air Shroud
B. Small Air Shroud
C. Rear Fans
D. Power Supply
E. Front Fan#1
2-12
Chapter 2: Chassis Description and Installation Instructions
I. Installing the Small Air Shroud
Procedures
1. Identify the location of the small shroud between the rear side of Front
Fan#1 (labelled "E" on the previous page) and the Power Supply (labelled
"D"). The Small Air Shroud is to be installed on the back wall of the Front
Fan1(E) and in front of the Power Supply (D).
2. Locate the six tabs (labelled J, K, L, M, N, and O) on the Small Air Shroud
and the six corresponding holes (marked as j, k, l, m, n, and o) on the
chassis as shown in the pictures below.
J
K
K
N
J
N
O
j
n
O
k
o
L
m
M
l
3.Align each tab on the Small Air Shroud with its corresponding hole on the
chassis, and insert the tab into its corresponding hole. Make sure that the
Small Air Shroud is securely installed in the proper place as shown on the
picture.
2-13
SUPER SC832/SC833 Chassis User’s Guide
II. Installing the Large Air Shroud
Procedures
1. Remove all the rear fans from the chassis if you have not done so. You can
remove a rear fan from the chassis by pressing the release tab on the upper
right corner of the fan and pulling the fan out of the chassis.
2. Align the Large Air Shroud against the rear fan stem (labelled 2) and gently
push the air shroud into the chassis.
2
3. Slide the rear fans into the fan slots. Make sure that the fans are securely
fastened on the chassis.
2-14
Chapter 2: Chassis Description and Installation Instructions
H. Installing the Motherboard
Be sue to disconnect the power supply before accessing or installing the motherboard into the chassis. However, you will need to, first, identify the CPU locations,
and then, install the correct type of standoffs under the CPUs before installing the
motherboard into the chassis. (Refer to Chapter 1 for Safety Guidelines.)
Procedures
1. Lay the chassis on a flat surface. Locate the CPU mounting holes on the
chassis and install CPU standoffs on the chassis.
1
(**Note: the motherboard shown above is for reference only!! The motherboard
is not included in the SC832/SC833 shipping package.)
2-15
SUPER SC832/SC833 Chassis User’s Guide
2. Install standoffs to all the remaining mounting holes on the motherboard.
Then, lay the motherboard on the standoffs.
4
A
3
2
3. Secure the motherboard to the chassis with Type A(6-32) screws as shown
above. (*Please refer to Page 2-1 MB kit for the Type A screw.)
4. Secure the CPU heatsink mechanism to the motherboard.
(**Note: the CPU shown above is for reference only!! The motherboard is not
included in the SC832/SC833 shipping package.)
!
Warning: For proper cooling, please make sure that all the
chassis covers are installed before you operate the system. Out
of warranty damage can occur if this rule is not strictly followed.
2-16
Chapter 2: Chassis Description and Installation Instructions
I. Installing Chassis Rails
Please make sure that the chassis covers and chassis rails are installed on the
chassis before you install the chassis into the rack.
To avoid personal injury and property damage, please carefully
follow all the safety steps listed below:
Before installing the Chassis rails:
1. Enclose the chassis with chassis covers.
2. Unplug the AC power cord(s).
3. Remove all external devices and connectors.
Procedures to Install Chassis Rails
1. Included in the shipping package are a pair of rail assemblies. In each rail
assembly, locate the inner rail and the outer rail.
2. Press the locking tab to release the inner rail from its locking position and
pull out the inner rail from the rail assembly. (*The inner rails are to be attached
to the chassis and the outer rails are to be installed in the rack.)
Outer rail (to be installed in the
rack)
Pull out the Inner
rail (to be
attached on the
chassis)
Press the Locking Tab
2-17
SUPER SC832/SC833 Chassis User’s Guide
3. Locate the five rail buttons on each side of the chassis and locate the five
corresponding holes on each of the inner rail.
(*Please note that one end of the hole is larger than the other end of the hole.)
3
4
4. Align the larger end of each hole against its corresponding button. Once all
aligned, push the holes toward their corresponding buttons and the rail is placed
on the chassis.
5. Once the rail is placed on the chassis, pull the rail forward until the rail
buttons lock in the small ends of the corresponding holes.
6. Secure the rail to the chassis with a Type G screw (Refer to Page 2-1 for the
Type G screw.) Repeat the above steps to install other rail on the chassis.
5
G
6
2-18
Chapter 2: Chassis Description and Installation Instructions
J. Rack Installation
After you have installed the inner rails on the chassis, you are ready to install the
outer rails of rail assemblies to the rack.
(* The rails are designed to fit in the racks with the depth of 28" to 33".)
Procedures
1. In the package, locate a pair of front (-short) and rear (-long) brackets. Please
note that the brackets are marked with Up/Front Arrows (-front) and Up/Rear
arrows (-rear).
2. Secure the front (-short) bracket (marked with the Up/Front arrows) to the
outer rail with two Type G screws.
3. Locate the two buttons on the outer rail and attach the rear (-long) bracket to
it by sliding the opening of the rear rail through the button.
4. Measure the depth of your rack and adjust the length of the rails accordingly.
5. Repeat the same steps install the other outer rail on the chassis.
6. Secure both outer rail assemblies to the rack with Type H screws and Type I
Washers.
3
2
G
2-19
SUPER SC832/SC833 Chassis User’s Guide
7. Slide the SC832/SC833 chassis into the rack as shown below:
(The SC832/SC833 may not slide into the rack smoothly or easily when installed
the first time. However, some adjustment to the slide assemblies might be needed
for easy installation.)
8. You will need to release the safety taps on both sides of the chassis in order
to completely remove the chassis out of the rack.
2-20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement