Global Radio Controlled Solar Powered Watch Thank you

Global Radio Controlled Solar Powered Watch Thank you
press/release and hold on 3 seconds any one of the S1/S2 buttons
located on the sides of the dial case. The hands and LCD screens
will start to SYNC for the accurate time.
Global Radio Controlled Solar Powered Watch
OPERATING INSTRUCTIONS
Thank you for your purchase of this quality watch. The utmost care
has gone into the design and manufacture of your watch. Please
read these instructions carefully and store them in a safe place for
future reference.
Main Features:
1. Dual Powered: Solar and Normal battery powered
2. Automatic Radio Controlled Time Setting for USA (WWVB),
Germany (DCF), UK (MSF) and Japan (JJY 60Khz only)
3. Time Zone setting by 25 major City names
4. 3 Levels Signal strength indicator
5. Reception success and failure indicator
6. LCD reading selection for:
S3/CAL
S1/SYNC
(Hidden Pusher)
Day of the week or
Date & Month or
Second or
Battery level
S2/MODE/SET
7. Dual Language selection between English and
German for Day
8. Watch hands reset (LCD shows “SET TO 12”)
9. Battery level indicator
60
05
Time Zone Setting:
USA user must set the watch to one of the following Time Zone.
Time Zone
Reading on LCD
Eastern
NYC(New York, USA)
Central
CHI(Chicago, USA)
Mountain
DEN(Denver, USA)
Pacific
LAX(Los Angeles, USA)
1. Holding S2 (the lower right button) for about 3 seconds while the
watch is in the normal time keeping mode until the LCD displays a
City name (3 digits City code).
2.Press S1 (the upper right button) to set your Time Zone according
to the following table.
15
45
10
50
55
Note: To save the battery life, you can press the three buttons
simultaneously. All hands will then turn and stop at 12:00 position.
20
40
50M
RADIO CONTROLLED
35
3. Press S2 to confirm (or the watch will confirm by itself after 1
minute).
25
30
Battery management
When Battery level is low, the LCD shows a flashing empty battery icon and the
seconds hand runs 2 steps every 2 seconds. If battery is not replaced in time,
the hands stop to save battery power at 12 o'clock.
Battery full
Level 4
>=3.0v
Battery middle high
Level 3
>=2.7v
Battery middle low
Level 2
>=2.5v
Battery low
Level 1
<2.5v
Button Function:
S1
Press and release S1 once to check if the reception was OK or Fail.
Press twice to show the battery level for around 5 seconds.
Press and holding this button 3 seconds for Manual Signal
Reception.
S2
Press to net LCD display to show
Day, or
Date, Month or,
Second or
Battery level
Press and holding this button to enter the “Main Menu”
S3
Press and release S3 for calibration the LCD shows a blinking
“SET TO 12”.
Manual Signal Reception
1. Holding S1 for more than 3 seconds until the LCD display shows
the Antenna icon. There is one digit on the right hand side of the
display showing the signal to receive. Where W=WWVB, J=JJY,
D=DCF and M=MSF. At the same time, the second-hand pauses at 12
o'clock during signal reception (for all Time Zones).
2. Put the watch (with face-up or face-down, never put the watch by
its side) nearby a window to get signal.
3. After reception, the watch will show the time again after the fast
running of the minute hand has stopped.
During signal reception, the LCD display shows the signal-strength.
It is good to search a location where signal in the strongest for a good
signal reception.
Reception Status Check:
You can check if the watch was able to pick up signal.
Press S1 once to check (while the watch runs normally).
If Reception OK→The LCD window shows OK
If Reception FAIL → The LCD window shows NO
LCD Display selection:
You can set the watch to show either one of the following digital
readings on the LCD display.
a.
Date, or
b.
Day and Month
c.
Second
d.
Battery level
Press S2 (the lower right button) one after another to select to set
your preferable display. The LCD display response on your second
press of the S2 button.
Initial Activation
Your new watch may be shipped from the factory in the “OFF” mode
(all hands at 12:00 position) to save battery life. To activate it, simply
4. The watch will run to the new Time according to the new Time Zone
setting automatically after the confirmation. Wait until the watch runs
normally.
The LCD shows “WAIT” telling you to wait while it is updating the time.
The running time varies from 2 to 40 minutes according to your Time
Zone setting.
Table of Time Zone against 25 major City Name
If you travel to country where no Radio Signal is available, your
watch will continue to function in the same way as a standard watch.
Time Zone
+0 (UK)
+1(Europe)
+2
+3
+4
+5
+5.5
+6
+7
+8
+9 (Japan)
+10
+11
+12
-12
-11
-10
-9
-8(Pacific)
-7(Mountain)
-6(Central)
-5(Eastern)
-4
-3
-2
-1
City Code (City Name) on LCD display
LON (London) – Radio Signal available
CET (Central European Time) – Radio Signal available
CAI (Cairo)
MOW (Moscow)
DUB (Dubai)
KRC (Karachi)
DEL (New Delhi)
DAC (Dacca)
BKK (Bangkok)
BEJ (Beijing, China)
TKY (Tokyo) – Radio Signal available
SYD (Sydney)
NOU (Noumea)
AKL (Auckland)
-----MID (Midway)
HI (Hawaii)
ANC (Anchorage)
LAX (Los Angeles) – Radio Signal available
DEN (Denver) – Radio Signal available
CHI (Chicago) – Radio Signal available
NYC (New York) – Radio Signal available
CCS (Caracas)
RIO (Rio De Janeiro)
GEO (South Georgia Grytviken)
AZO (Azores)
English / German language selection
You can select English or German language for the Day on the LCD
display.
1.Holding S2 (the lower right button) for about 3 seconds while the
watch is in the normal time keeping mode until the LCD displays a
City name (3 digits City code).
2.Press S2 once again and the LCD shows a blinking Day (example
TUE).
3.Push S1 to switch the Day from English to German language or vise
versa.
4.Push S2 to confirm.
Manual Time Setting
Your watch set itself automatically. This manual time setting is an
option only when in case there is no signal around after the battery is
replaced. When you go aboard, you should change the time of your
watch using Time Zone setting instead of the Manual Time Setting.
1. Holding S2 (the lower right button) for about 3 seconds while the
watch is in the normal time keeping mode until the LCD displays a
City name (3 digits City code).
2. Press S2 once after another until it shows Hour digits. You can see
an ”H” on the LCD representing Hour setting. It is a 24 hours format.
3. Press S1 to set and S2 to confirm the Hour setting.
4. After confirmation of Hour, the LCD shows “M” representing Minute
setting, press S1 to set and S2 to confirm. The watch will run to the
new Time according to the new time setting automatically after the
confirmation and shows “WAIT”. Just wait until the watch resume
normal running.
TROUBLESHOOTING
Second-hand shifting
Your watch is a very delicate and precise instrument. Although
uncommon, sometimes hard knocks or vibrations can cause the
hands to move irregularly, and therefore display the incorrect time,
although the internal clock is keeping accurate time. You may notice
this if when setting the LCD to “Second” reading and found that it is
not synchronized with the Analog Second-hand. This shows the
reference point of the Analog Second-hand has changed and the
watch needs to be reset. Please go to “Reset the Watch” for details.
Watch Not Receiving Time Signal
Reason for not being able to receive the Time Signal include,
Being outside of the radio signal area
Being in a build up area
Metal objects blocking the radio signal
Interface by computer monitor or TV
Ensure the watch is left by a window, as this gives the best reception,
you may have to try different windows in the house to see which is
best. You can test this using reception status test described earlier.
Please note that reception is always better at night.
If your watch is unable to make contact with the radio signal, it will
continue to function in the same way as a standard watch. The time
will then be corrected the next time your watch receives the time
signal.
Watch stop or runs 2 steps every 2 second
When Battery level is low, the LCD shows a flashing empty battery
icon and the seconds hand runs 2 steps every 2 seconds. If battery is
not replaced in time, the hands stop to save battery power at 12
o'clock.
Hour is wrong while Minute is right
If your Time Zone setting is incorrect, your watch will show you the
wrong time. You need to manually set it to the right Time Zone. Go to
“Time Zone Setting” for details
Second or Hour or Minute hands are wrong
Need to reset all hands to 12 o'clock. Go to “Reset the watch” for
details.
Reset the Watch
1. Make sure the watch is running second by second.
2. Press release S3 for calibration the LCD shows a blinking “SET TO
12” and then release the button.
3. Press and holding S1 until the second hand is fast spinning. You
can stop the high speed running watch hand by a press-release of
S1 anywhere you want. To restart the fast running second-hand,
press and holding S1 for 3 seconds.
4. Stop the fast moving second-hand by press-release S1 before all
hands reach the 12 o'clock position. We recommend stopping at
11:59:00 and continuing manually.
Take out the battery and insert a new one (watch the polarity “+”up.)
Now push the battery and spring down. Before you put the case-back
on again, make sure the waterproof seal is correctly in place.
IMPORTANT:
1. After battery replacement, wait for about 10 minutes until the
second hand starts running normally. If the watch hands have been
pointing at 12 o'clock before the battery replacement, jump to Step 8.
If hands positions are not pointing at 12 o'clock, follow the following
steps (starting from Step 2) to initiate the watch.
2. Press release S3 for calibration the LCD shows a blinking “SET TO
12” and then release the button.
3. Press and holding S1 until the second hand is fast spinning. You
can stop the high speed running watch hand by a press-release of S1
anywhere you want. To restart the fast running second-hand, press
and holding S1 for 3 seconds.
4.Stop the fast moving second-hand by press-release S1 before all
hands reach the 12 o'clock position. We recommend stopping at
11:59:00 and continuing manually.
5.Press-release S1, one short press at a time to incrementally
forward the hands to point exactly at 12 o'clock. Should you
accidentally pass 12:00:00, the procedure must be started again.
6.When all hands are aligned at the 12 o'clock position (12:00:00),
PUSH S3 hardly to confirm.
7.The LCD display shows “LON”. This is the pre-set Time Zone of the
watch – LONDON, UK.
8.Set your Time Zone by S1.
9.Press-release S2 to confirm.
10.Then, the watch will initiate a signal reception automatically. Put
the watch nearby a window and let it rests by its side or in a facedown manner (make sure a metal band doesn't touch the case-back
of the watch).
11.The watch will run to the right time if the reception is successful or
starts to run at 12 o'clock if the reception is failed.
12.Place your watch near a window to get signal if the initial
reception is failed. The watch will start to update signal at the
beginning of next Hour. It will continue updating signal for the coming
24 hours.
After receiving a valid time signal, and the hands move on to the
correct time.
5. Press-release S1, one short press at a time to incrementally
forward the hands to point exactly at 12 o'clock. Should you
accidentally pass 12:00:00, the procedure must be started again.
OUR GUARANTEE
Your watch is guaranteed for 12 months from the date of purchase
against any faults arising from defective materials or manufacture.
Damage caused through careless handling, misuse or in transit is
expressly excluded. Should this watch fail within 12 months please
return it in the first instance to your retailer.
6. When all hands are aligned at the 12 o'clock position (12:00:00),
PUSH S3 hardly to confirm.
If you have any queries, problems or do not understand any part
of these instructions please contact:
7.After confirmation, the LCD display shows “LON”. This is the preset Time Zone of the watch – LONDON, UK.
Customer Help Line 01908 449208 or Local 0845 1207208
Mon – Fri 9am-4.30pm
e-mail for service: service@acctim.com or visit www.acctim.com
8.Set your Time Zone by S1.
9.Press-release S2 to confirm.
10.Then, the watch will initiate a signal reception automatically. Put
the watch nearby a window and let it rests by its side or in a facedown manner (make sure a metal band doesn't touch the case-back
of the watch).
11.The watch will run to the right time if the reception is successful or
starts to run at 12 o'clock if the reception is failed.
12.Place your watch near a window to get signal if the initial
reception is failed. The watch will start to update signal at the
beginning of next Hour. It will continue updating signal for the coming
24 hours. After receiving a valid time signal, and the hands move on
to the correct time.
Battery Change
Your watch uses a 3V CR2016 battery, you should find a trained
jeweler or watch specialists to change the battery to avoid any
damage to the watch.
Open the watch at the back. Carefully remove the button, make sure
you do not lose the waterproof seal.
Battery Change Service
Acctim can offer you a battery change service for a fee of £10.00.
Should you want to take up this offer then please send your watch
along with your cheque for £10.00 payable to Acctim Limited to:
Watch Department, Acctim Limited, Acctim House,
Jenna Way, Newport Pagnell, Buckinghamshire, MK16 9QJ
Environmental Protection
Disposal of electrical & electronic equipment
Do not dispose of this product with household waste. For
the proper treatment, recovery and recycling please take
this product to the appropriate collection point. If you are
unsure of where this is contact your local authority.
Improper disposal may be harmful to the environment.
Disposal of electrical & electronic equipment Do not
dispose of this product with household waste. For the
proper treatment, recovery and recycling please take this
product to the appropriate collection point. If you are
unsure of where this is contact your local authority.
Improper disposal may be harmful to the environment.
PI-EXW0710
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising