Customer Expectation Document WorkCentre 5325/5330/5335

Customer Expectation Document WorkCentre 5325/5330/5335
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011
Volume Range / Performance

The WorkCentre 5325/5330/5335 is designed to produce consistent uniform
looking monochrome prints and copies.
The WorkCentre 5325/5330/5335 series is designed to operate in the range of
4,000 to 20,000 copies or prints per month.
Power Consumption
The number of copies or prints between service calls on a digital copier / printer
is highly dependent on customer expectations of quality and the use of
applications and throughput materials.
WorkCentre 5325: Up to 100,000 transactions per month

WorkCentre 5330: Up to 125,000 transactions per month

WorkCentre 5335: Up to 150,000 transactions per month



Ave 111 – 127 watts
Ave 87 – 89 Watts
Recommended Temperature
Range
Humidity (non-condensing)
Heat Emission
Altitude (above sea level)
Sound Power Levels
Sound Pressure Levels
WorkCentre 5325/5330/5335
Sole Use (not required but recommended)
110-127VAC
220-240VAC
15A
10A
Frequency
50/60 Hz, Single Phase
50/60 Hz, Single Phase
Receptacle
NEMA part #: 5-15R
Varies by country
requirements
Power Cord Length
8.5 feet
250 cm
Min.
50º F (10º C)
Max.
90º F (32º C)
15% RH
435 BTU/Hr
(Standby)
0
85% RH
2700 BTU/Hr (Running)
8,200ft. (2,500 meters)
Operating
Ave 6.46 –
6.65 (LwAd)B
Ave 47 – 50
(LpAm)dBA
Standby
Ave 3.82 (LwAd)B
Ave 20 (LpAm)dBA
The dimensions listed below provide the overall service space required,
including the space to the nearest obstruction. The dimensions reflect both
typical and hallway installations and are absolute minimums. The Integrated
Office Finisher has the same space and footprint as the Base Machine.
US/Canada only: If installing in a walkway, allow 24" (61 cm) more in front of
machine to meet fire code requirements.
Electrical Requirements
Amperage
Ave 1.1 - 1.8 Watts
40 seconds
Space Requirements / Service Space Envelope
Documentation will be available for customers looking to learn more about this
device. Customer training on machine features and functions is also a
purchasable service for the WorkCentre 5325/5330/5335.
Voltage
12 seconds
Acoustic Noise
Customer Training
Receptacle diagram
Varies by country

Power Consumption Standby
Low Power Mode Power Usage
Environmental Requirements
Physical delivery of WorkCentre 5325/5330/5335 will be by a Xerox
authorized “Delivery/Removal” carrier. The carrier will install and perform
a functional check of the printer/copier unit. The carrier will review the
software/documentation with the customer. The customer is responsible
for connecting and configuring the equipment on their network.
There should be a minimum of 78 inches (1,981 mm) clearance from the
floor to the nearest overhead obstruction.
Electrical requirements and space requirements must be satisfied before
the equipment is delivered.
One network drop is required for installation as a printer / copier.
Line Option
Ave 695 – 757 watts
Sleep Mode
Warm Up time from Off
Installation Considerations

Power Consumption Running
Low Power Mode Recovery Time
At an average usage of 10,000 copies or prints per month, it is expected that
service will be required less than three times per year. Volumes higher than this
could result in more frequent service.
Maximum copy/print volume supported under standard vendor supplied service
for any single month. Customers should consider multiple machines if average
monthly volume approaches duty cycle on a continual basis
Maximum Duty Cycle:

One power cord (see above) is required for the WorkCentre
5325/5330/5335 copier / multifunction printer and is provided with the
device. The convenience stapler requires a separate power source.
Ground Fault Protection is provided which meets Xerox internal safety
requirements and exceeds the Industry Standards for Information
Technology Equipment.
1
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011
Machine without Finisher or with Integrated Office Finisher
Dimesions (W x D x H)
Base Unit with
Bypass Tray Closed
Base Unit with Office
Finisher LX
Base Unit with High
Capacity Feeder
Weight
23.5 x 25.1 x 43.9 in./ 597 x 637.5 x
1,115 mm
48.8 x 25.6 x 43.9 in./ 1,239 x 651 x
1,115 mm
36.7 x 25.5 x 43.9 in./ 932 x 648 x
1,115 mm
220 lb./
100 kg
301.9 lb./
137.2 kg
283.8 lb./
129 kg
Energy Star
Energy Star is a government-backed program helping businesses and
individuals protect the environment through superior energy efficiency. The
WorkCentre 5325/5330/5335 is Energy Star certified. This means that the
machine has been tested against total energy consumption and meets Energy
Start criteria.
Operating Supplies / Customer Replaceable Units (CRUs)
Machine with Finisher
The product will be delivered with a starter Toner cartridge (11,000 sheet yield)
and drum.

Customers may order toner, paper, staples, and unique transparencies
directly via Xerox Supplies at 1-800-822-2200.

US Customers on Metered Price Plans should contact the Metered
Customer Support Center at 1-800-599-2198 to acquire additional toner.

US Customers on Maintenance Contracts should order CRUs (the Drum
Cartridge) via the Welcome Center at 1-800-821-2797.

US Customer on Time and Materials service should order CRUs (the Drum
Cartridge) via the Customer Parts Center at 1-800-828-5881.
There is no recommended on site CRU inventory. Customers do not need
to stock extra CRUs.
Note that the Toner cartridges are made for specific geographic locations.
Cartridges designated for a certain locale will not work in other locales.


Replaceable Module
Machine with Finisher and High Capacity Feeder
Starter Yield
Replacement Yield
Drum Cartridge
60k*
90K*
Toner Module
11K**
30K **
* Declared yield based on an average job size of 3 A4/Ltr pages. Yield will vary
depending on job run length, media size & orientation.
** Yield based on ISO/IEC 19752 Test Standard. Toner consumption will vary
depending on image, area coverage and media that is used.
Automatic Meter Read/Automatic Supply Read (AMR/ASR)


2
The WorkCentre 5325/5330/5335 supports Smart eSolutions
MeterAssistant, an automated meter read feature. SuppliesAssistant
supports a limited set of CRU’s (Drum and Toner only).
Network connected equipment comes ready to enable meters to be sent
over the network to a Xerox Communication Server in order to provide
accurate and timely meter reads for billing purposes. Additional detail
specific to the Configuration and Use of the MeterAssistant Option is
available at www.xerox.com\smartesolutions.”
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011
Tray #
Size
Document Feeder
Capacity
(using 24lb
/ 80gsm
Paper)
Specified Weights
520 sheets
60 – 105 gsm / 16
lb. bond – 28 lb
bond
520 sheets
60-215 gsm / 16 lb.
bond - 80 lb. cover
2000 sheets
(800 &
1200)
60-215 gsm / 16 lb.
bond - 80 lb. cover
50 sheets
60-215 gsm / 16 lb.
bond - 80 lb. cover
Maximum capacity of DADF: 110 sheets (20lb/75gsm)
1
DADF Media Handling
Document Size
Media Weights Simplex
Media Weights Duplex
Productivity
LEF = Long Edge Feed
Min
3.3 x 4.9 in. / 85 x
125 mm LEF (4.3 x
4.9 in. / 110 x 125
mm Duplex)
13 lbs / 38 gsm
13 lbs / 50 gsm
35 dpm @ 600 dpi
Max
/ 139.7 mm x 182 mm
11.7 x 17 in. / 297 x
432 mm
SEF
SEF to 11.7” x 17”/ 297
mm x 432 mm SEF
32 lbs / 128 gsm
32 lbs / 128 gsm
55 dpm @ 200 dpi
A3 SEF B4 SEF A4 SEF
A4LEF
SEF = Short Edge Feed
Color Scan
Resolution
600dpi
600dpi
400dpi
Scan
300dpi
200dpi
Mode
Copy
Custom Sizes: 5.5” x 7.2”
B5 SEF B5 LEF A5 SEF
11” x 17”SEF
IIT/DADF Configuration
Simp (DPM)
3 Pass Dup (DPM)
35 DPM
20 DPM
35 DPM
20 DPM
45 DPM
26 DPM
55 DPM
31 DPM
55 DPM
31 DPM
Legal (8.5” x 14”) SEF
8.5” x 13”SEF
Letter (8.5” x 11”) SEF
Letter (8.5” x 11”) LEF
7.25”x10.5”LEF
Mode
Copy
Scan
Fax
BW Scan
Resolution
600dpi
600dpi
400dpi
300dpi
200dpi
Super fine
(600dpi)
Super fine
(400dpi)
Fine (200dpi)
IIT/DADF Configuration
Simp (DPM)
3 Pass Dup (DPM)
35 DPM
20 DPM
35 DPM
20 DPM
45 DPM
26 DPM
55 DPM
31 DPM
55 DPM
31 DPM
5.5” x 8.5” SEF
2
Custom Sizes: 5.5” x 7.2”
/ 139.7 mm x 182 mm
SEF to 11.7” x 17”/ 297
mm x 432 mm SEF
35 DPM
20 DPM
45 DPM
26 DPM
A4LEF
55 DPM
31 DPM
B5 SEF B5 LEF A5 SEF
A3 SEF B4 SEF A4 SEF
11” x 17”SEF
*Scanning speed will vary based on scan resolution and document used. DPM
stands for Documents Per Minute.
Legal (8.5” x 14”) SEF
8.5” x 13”SEF
Duplex (2-sided) Copying / Printing
Letter (8.5” x 11”) SEF
Automatic duplexing: Standard size media up to 11”x17” (A3) and 105 gsm
can be performed from tray 1, and 169 gsm for trays 2, TTM, HCF, and bypass.
As with any copier or printer, duplex performance is not expected to match the
performance for single sided copying. Paper jam rates may be higher than the
rate you will experience for the same throughput material in single sided mode.
Letter (8.5” x 11”) LEF
Optional
TTM
Paper / Throughput
Users can supply paper to other trays while printing
Bypass
Tray configurations – The base machine has 2 trays (520 sheets each) and a
Bypass Tray (50 sheets). The Tandem Tray Module (TTM) has Trays 3 & 4 with
capacities of 800 and 1200 sheets each Letter/A4 LEF.
External high capacity feeder has a paper capacity of 2000 sheets and is only
available with the TTM configuration.
3
7.25”x10.5”LEF
5.5” x 8.5” SEF
A4
Letter
B5
Executive (7.25 x 10.5
4x6 LEF
5X7 SEF
6x9 SEF
5.5x8.5 LEF
8.5x11 LEF & SEF
8.5x13 SEF
8.5x14 SEF
11x17 SEF
#10 Envelope LEF
Monarch Envelope LEF
Or Custom sizes:
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011
Optional
High
Capacity
Feeder
Optional
Envelope
Tray





3.5 x 3.9” to 11 x 17” /
89 x 98.4 mm to A3
A4
Letter
B5
Executive (7.25 x 10.5)
#10
C5
DL
Monarch
Custom Sizes: 3.9 in x 5.8
in / 98 mm x 148 mm to
6.4 in x 9.5 in / 162 mm
x 241 mm
FCOT: 4.2 seconds (5325/5330), 4.0 seconds (5335)
2000 sheets
60-215 gsm / 16 lb.
bond - 80 lb. cover
Up to 60
75-90 gsm/ 20 lb.
bond – 24 lb. bond
Settings/measuring conditions: Power is on, engine motor is not running,
fuser is ready, laser scanner motor is ready, normal paper (10lb/80 gsm),
A4 or 8.5” x 11” LEF, platen mode, uncollated, 100% magnification,
simplex copy.
FCOT cannot be met with the following functions: Image repeat, split
scan, N-up, image shift, annotation, image overlay, rotation angle not 0
degrees
Copy/Print Speed
On plain paper. LEF = Long edge feed; SEF = Short edge feed
Paper Size
Copy
Paper Tray
and Paper
Mode
Tray
Tray
TTM
TTM
Orientation
1
2
(3rd)
(4th)
Attempts to feed heavier than recommended paper stocks, and/or misuse
of the media settings, may cause machine damage or poor image quality.
Using media at run modes other than that recommended for the grade
may cause poor image quality and serious machine damage.
HCF
Bypass
Plain Paper
A4 LEF
If a sheet of paper, whose feed-direction length is smaller than 5.5
inches/140mm, is run from bypass, the sheet may travel along the IBT
belt, instead of being fed into the fuser, and may get into the IBT cleaner,
resulting in damage to the machine
8.5” x 11”
Simplex
25/30
/34
25/30
/35
25/30
/35
25/30
/35
25/30
/35
25/29/31
Duplex
25/30
/34
25/30
/35
25/30
/35
25/30
/35
25/30
/35
25/29/31
Simplex
20/22
/22
20/22
/22
20/22/22
Duplex
13/13
/14
13/13
/14
13/13/14
Simplex
16/19
/20
16/19
/20
16/19/20
Duplex
11/12
/13
11/12
/13
Simplex
14/16
/17
14/16
/17
14/16/17
Duplex
10/11
/12
10/11
/12
10/11/12
Simplex
25/30
/33
25/30
/33
25/30
/33
25/30
/33
25/30
/33
25/29/31
Duplex
25/30
/33
25/30
/33
25/30
/33
25/30
/33
25/30
/33
25/29/31
Simplex
15/17
/17
15/17
/17
Duplex
15/17
/17
15/17
/17
LEF
A4 SEF
Xerox stock 32lb bond (3R11387) and 60lb cover (3R11390), which are
designed for the xerographic process, can be run satisfactorily.
8.5” x 11”
Envelope tray may not meet the spec when there is a curl or twist on an
envelope set on the tray. Paper handling may be improved by removing a
curl or twist.
SEF
The optional Envelope Tray has been designed for casual office use. It is
not intended for a production-type environment.
8.5” x 13”
B4 SEF
SEF
11/12/13
Not Supported
8.5” x 13”
Transparencies
SEF
The following transparencies are approved for use:

A3 SEF
3M Type L Desktop Laser 3R91334 (Europe only)

Xerox Removable Stripe 3R3108

Xerox B/W Plain Type C 003R98205 (Europe only)
11” x 17”
SEF

Xerox Type B Universal White Stripe 003R98204 (Europe only)
Use of other transparencies may cause machine damage and result in
excessive service calls.
B5 LEF
7.25” x 10.5”
LEF
B5 SEF
Heat Transfer Paper
Heat transfer paper of any type or brand is not recommended for use with the
WorkCentre 5325/5330/5335.
15/17/17
15/17/17
Not Supported
Standard Output
The WorkCentre 5325/5330/5335 includes Upper and Lower Center Output
Trays; each can accommodate up to 250 sheets of 11x17”/A3 80 gsm / 20 lb
media. The capacities are reduced if additional finishing options are installed.
A5 SEF
Simplex
11/13
/13
11/13
/13
11/13/13
5.5” x 8.5”
SEF
Duplex
11/13
/13
11/13
/13
11/13/13
A5 LEF
Simplex
25/29/31
Not Supported
Duplex
25/29/31
First Copy Out Time (FCOT)
Maximum Image Sizes
Warm-up time is the time within copying will start from sleep mode.
Warm up time: 12 seconds
The WorkCentre 5325/5330/5335 will reproduce A3/11”x17”. The maximum
length images (432mm) are only produced on 11”x17” media. On all media
there is a maximum Lead Edge deletion of 4 mm and a Trail Edge deletion of 4
mm. Side edge deletion is 4.1 mm. With Copy, Fax and print when image
FCOT is the time between depression of the Start button and the
appearance of the first copy in the output tray (until the trail edge of
the first copy is ejected from the exit).
4
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011

enlargement is selected there is a maximum Lead Edge deletion of 16 mm and
a Trail Edge deletion of 16 mm. Side edge deletion is 16 mm.
Copy/Print
Max. Imageable Area
Guaranteed Image Quality Area
297mm x 432mm
11.69” x 17.00”
Scanning Specifications
Scanned Image
295mm x 432mm
11.61” x 17.00”
Letter (A4 / 8.5x11 in.)
Tabloid (A3 / 11x17 in.)
Compressed/OCR PDF
System Setup



A power off and on may be required if some system settings are changed.
Machine configuration changes cannot be made until there are no jobs in
progress, even remotely through CWIS.
Alert beep sound level can be turned off or lowered in System Admin
mode.
Unix: AIX 5 v5.3, HP UX
11.0/11i v2, Solaris 9/10, Linux
Fedora Core 12/14, Red Hat
Enterprise, SUSE 11. Check
CentreWare, for Unix release
documentation for the exact
versions supported.
Vista/Server 2008 (32.64)/Win7
Print Drivers Supported
PS/PCL6/PPD (available to be used for
basic printing in absense of the real
driver)
PS
Job Flow Sheets
PS Custom driver




XPS








Max Resolution
600 dpi
600 dpi
300 dpi
Note: Several resolution settings are selectable via User Interface touch panel.
Lower resolutions will result in files that are smaller in size thereby reducing
network traffic.
®

Scan-to-email is standard on the WorkCentre 5325/5330/5335 MFP
configuration. Network scanning capability is optional.

When scanning the OCR processing, image compression, file
formatting and file transfer operations all continue after the job has
completed scanning by the scanner.

No more than 10 scan jobs can be concurrently processing. Scanning of
additional jobs can resume once less than three scan jobs are in the job
queue.

Heavy scan usage will reduce the RIP performance of print jobs.
Print Services and Network Connectivity
Operating System
Environment
Windows XP SP3 & above (32 &
64 bit), Server 2003/2008 (32 &
64 bit), Vista (32 & 64 bit),
Windows 7 (32 & 64 bit)
Mac OSX 10.5 & higher
The Print Around feature holds a job needing additional resources (such
as a different paper size) and prints the next job in queue. This function
allows the device to keep working, while making sure jobs are printed
correctly.
Citrix client printing is supported with PCL6 and Post Script. For Post
Script, the Post Script kit is needed.
NDPS must be installed with IP, not using IPX.
The 5325/5330/5335 supports access to Xerox CentreWare Internet
Services and Xerox CentreWare Web.
SMB, Ipd, EtherTalk, NetWare, IPP, HTTP, DHCP, SMTP, POP, LDAP, DDNS
(level 2), RARP, and Port9100 are supported
IPV4 and IPV6 are supported for IP in Network layer
TokenTalk is not supported.
Jobs stored in the folder via print driver can’t be routed via Job Flow
Sheets.
Job Flow Sheets can be set up at the device, through CWIS or using the
Job Flow Editor. Each destination is set up electronically and there is no
paper or paper-ware involved.
Destinations can include e-mail, FTP, SMB, Fax, Internet fax &/or Printer.
Job Flow Sheets created at the local UI are limited to 2 SMB, 2 FTP
locations, 100 e-mail addresses & 1 printer.
Job Flow Sheets created in CWIS have a limit of 1 SMB, 1 FTP location, 10
e-mail addresses & 1 printer.
Job Flow Editor utility is limited to 30 total destinations per Job Flow
Sheet. This can be any mix of 30 e-mail, Fax, Internet Fax, printers, FTP or
SMB destinations.
Scan to / Print from USB



Standard with the MFP configuration
USB Print enables walk-up users to print Print-Ready files (i.e. PDF or XPS)
directly from a USB Drive.
Files are sent directly from the USB drive to the device.
Media Card Reader
Requires third party device. Allows user to view and print images directly from
a media card.
Supported PDL on the device






Image Overwrite (standard on all configurations)
PCL5e,
PCL6
HPGL/HPGL2
TIFF/PDF
XPS
PS (option)
The WorkCentre 5300 series allows administrators to overwrite print jobs after
they’ve been processed (printed or deleted); to overwrite the entire hard drive;
or to overwrite stored files (saved jobs, personal print jobs) as they are deleted
from the hard drive.
Hard Disk Encryption (Standard on all configurations)
Using advanced 256-bit AES encryption, hard disk encryption protects Xerox
MFP’s data at rest from unauthorized access.
•
AES 256-bit encryption, FIPS (Federal Information Processing Standard)
140-2 Validated
•
All data is encrypted before it is stored on the hard drive AES is a small,
fast, hard-to crack-encryption standard and is suitable for a wide range of
devices or applications. It is the state-of-the-art combination of security,
performance, efficiency, ease of implementation and flexibility.
Supported PDL on the driver


PCL6
PS
Print Around
5
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011
plug-ins are available at the Xerox Secure Access Unified ID Systems and
WorkCentre 5325/5330/5335 download pages on Xerox.com.
PSTN Faxing (Optional) (Public Switched Telephone Network)




If Fax option is installed, the following telephone line requirements are
applicable:

Telephone wall jack should be within 7’ of the Line Jack of the
machine.
Telephone service supported:

Sole use, non-switchboard or PBX.

RJ11 - 6 position, 4 pin modular jack.

Single analog line. (Voice over iP--VoIP, DSL or other Digital Phone
lines are not supported)
For 3-line fax option, a second and third telephone line meeting the
requirements identified in items 1 and 2 above is required.
®
5325/5330/5335 fax
Installation of analog PSTN WorkCentre
equipment onto DSL equipped phone lines is a Non-Supported
Application. The Customer assumes all risk and liability for any needed
Filters or Line modifications, with no guarantees of functionality by Xerox,
or any of its Operating Groups or Subsidiaries.
Output – Finishing
There are 2 finishing options for the WorkCentre 5300 series.
The optional Office Finisher LX capabilities:
Paper stacking and offset available for 16 lb. bond to 80 lb. bond cover (60 gsm
to 215 gsm paper). Multi-sheet stapling available for paper 16 lb. bond to 24
lb. bond (64 gsm to 90 gsm). Heavyweight papers can be used as cover sheets.
Fax over IP Kit (SIP/T.38) (Optional)




The Fax over IP kit enables fax to be transmitted and received by the
WorkCentre 5325/5330/5335 over network and VoIP gateways using the
T.38 and SIP protocols.
On screen interface is identical to traditional PSTN fax screen
Requires a customer’s SIP server or T.38 compliant VoIP gateway:

With customer’s SIP server, enables existing phone numbers or user
names to be designated for destination

With VoIP gateway, enables IP fax to be transmitted to G3 fax (that
doesn’t have IP Fax (SIP) feature connected to public line

With no SIP server or VoIP gateway, enables IP faxes to be
transmitted across intranet to another IP Fax compliant device
Customer is responsible for providing or being aware of gateway setup
and port numbers of the gateway

Max paper size: A3 SEF (297mm width) or 11 x 17” (432mm feed length)

Min paper size: A4 SEF (210mm cross-feed length) or B5 LEF (182mm
feed length)

Custom sizes are supported.

Stacking: Up to 2000 sheets 24 lb. bond / 90gsm, and offset stacking up
to 50 sheet stapled sets

Hole punch and the Booklet Unit are optional accessories

A saddle stitched document cannot be hole punched

The maximum number of pages that can be saddle-stitch stapled is 15
(20 lb. bond / 80 gsm or less) pages
The optional Integrated Office Finisher capabilitites:
Print Speed / System Performance



First Print Out Time: 11 seconds
The WorkCentre 5325/5330/5335 is a document printer; therefore, in
reverse order (face-up) printing the print engine will not cycle up until the
entire job is ready. This will impact First Copy Out Time (FCOT). The
printer may cycle down between each job depending on job complexity.
Overall system performance (‘Click to Clunk’ time) is primarily dependent
upon the software applications and network environment being used.
Rasterizing (RIP-ing) is only a small fraction of Click to Clunk time.

60gsm – 215 gsm (16 lb bond. to 80 lb. cover) media (includes stapling)

Supported paper sizes, LEF (for stapling): B5, A4, Letter, Executive

Supported paper sizes, SEF (for stapling): A4, B4, A3, Letter, 8.5x13”,
8.5x14”, 11x17”, Executive (Custom sizes are not supported).

Supported paper dimensions (for stacking):
- Cross feed length: 3.5 – 11.7 in. / 88.9 – 297 mm
- Feed length: 3.9 – 17 in. / 98.4 – 432 mm

Stacking: Up to 500 sheets 20 lb bond/80gsm, A4/Ltr, up to 250 sheets 20
lb. bond/80 gsm A3/11x17”

Stapling: Front, Single-position stapling. Not available for Transparency,
Envelopes, Labels, and Coated Paper.

Stapling Capacity: 50 sheets 24 lb. bond/90 gsm or less (or two 80 lb.
cover/215 gsm covers + 48 sheets 24 lb. bond/90 gsm)

Stapling Position:
LEF: B5, A4, 8.5x11”, Executive
Mailbox Communication


F
F
Up to 200 mailboxes can be created
Up to 1000 documents can be stored in mailboxes
SEF: A4, 8.5x11”, 8.5x13”, 8.5x14”, B4, A3, 11x17”
Foreign Device Interface (FDI)


The FDI connector and internal wiring harness is standard on all
WorkCentre 5325/5330/5335 machines. 3rd party external hardware
interface still required.
The FDI will control only printing and copying services.
F
Xerox Secure Access Unified ID System (Optional)

Xerox Secure Access USB card readers are required. Additional device
plug-ins must be installed to enable the device USB functionality. These

The Integrated Office Finisher does not support hole punching.

The Center Output Tray is not available with the Integrated Office
Finisher
3rd Party Solutions
6
F
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011


The WorkCentre 5325/5330/5335 Technical Brief documents the 3rd
party solutions that are compatible with the WorkCentre
5325/5330/5335. It is recommended to test in customer environment for
complete validation of compatibility.
The Job-based accounting kit for the WorkCentre 5325/5330/5335
printer-copiers provides the interface to provide accounting features by
rd
connecting 3 party’s device and external account server
LX
Hole Punch Unit
Booklet Maker
Convenience
Stapler
Envelope Tray
Hole Punch capability for Office Finisher LX
Score and Saddle Stitch capabilities to Office Finisher LX
50-sheet stapler
Feeds up to 60 envelopes (replaces Tray 1)
Standard Configurations
WorkCentre 5325/5330/5335 Copier Only
Reference Material

Copy engine with Platen cover or 110-sheet DADF

160 GB HDD, 1 GB System Memory
WorkCentre 5325/5330/5335 is shipped with a complete set of drivers, user
and administration guides on a CD/DVD.

Automatic duplex copy available
Customer Support

Security features (Image over-write and 256-bit encryption)

Electronic Pre-Collation

Must choose: Stand, or Tandem Tray Module

1090 sheet paper capacity via 3 paper trays, or 3090 via five trays
The Xerox Customer Support Centers is available to provide general
information, answer questions and take service calls. You can reach the
Customer Support Center at the following toll-free phone number:
United States
1-800-821-2797
Canada
1-800-939-3769
To order Replacement Customer Replaceable Units (CRUs):
Full Service Maintenance customers order replacement CRUs through Xerox
Customer Support Center using the toll free number above.
Time and
Materials Maintenance customer order replacement CRUs through the Logistics
Customer Support Center at 1-800-828-5881.
WorkCentre 5325/5330/5335 Copier/Printer/ Scanner:

Print/Copy engine with 110-sheet DADF

160 HDD, 1 GB System Memory

Color Scanning

Automatic duplex print & copy

Security features (Image over-write and 256-bit encryption)

Electronic Pre-Collation

Must choose: Stand or Tandem Tray Module

1090 sheet paper capacity via 3 paper trays, or 3090 via five trays
To order additional Supply (toner / staples) or Throughput materials: The
Xerox Supplies Marketing Center, 1-800-822-2200 US, 1-800-668-0199 CAN
(English), 1-800-668-0133 CAN (French) is available for ordering Xerox supplies,
including paper and other throughput material.
US Customers on Metered Price Plans should call the Metered Hotline, U.S. 1–
800–599-2198 to acquire additional toner.
Optional Accessories- see product brochure or sales representative
for more information
Accessory
Description
PostScript Kit
Adobe PostScript printing (includes a small plug-in card),
total of 2GB memory
Print kit, color scan, scan to email, color scan to/print
from USB, available CAC enablement
Network scanning. Includes Thumbnail Preview,
Searchable PDF & MRC Compression
Scan to searchable PDF/XPS right from device
View jobs right on User Interface
MFP upgrade kit
Scan Kit
Searchable PDF
Thumbnail
Preview
Fax over IP Kit
1-Line Fax Kit
3-Line Fax Kit
Server Fax Kit
Network
Accounting Kit
Foreign
Interface Kit
Integrated
Office Finisher
Office Finisher
Fax over Voice over IP
One-line embedded fax over PSTN. includes LAN fax &
Internet Fax
Three-line embedded fax over PSTN. includes LAN fax &
Internet Fax
Connects to network fax servers.
rd
Enables 3 party job based accounting packages from
Xerox Alliance Partners
Third party device that enables the connection of
external devices.
Zero-footprint finisher with 500 sheet stacking & 50sheet single staple
2,000 sheet stack, 50-sheet multi-position staple
Responsibility Matrix
Responsibility
Action
Ensure adequate space and power to configure
the WorkCentre 5325/5330/5335.
Unpack system / components
Install system hardware
Connect all System Components prior to
7
Customer
X
Xerox
X
X
X
Customer Expectation Document
WorkCentre 5325/5330/5335 Multifunction Printer/Copier
Version 7, 15 July 2011
powering up the system
Install the printer description files and server,
status Desktop Accessories on Client
Ensure network configuration
Confirm network integrity
Acquire and install client workstation network
software
Run initial software diagnostics when directed
Monitor and adjust as required
Load any additional fonts
Procure BNC transceiver for network connection
Order and replace Customer Replaceable Units
(Drum cartridges, Fuser and Waste Toner
Cartridge) as needed.
Provide Help Line support (with purchase of
FSMA)
Provide spared parts (with purchase of FSMA)
Provide service (with purchase of FSMA)
Customer
X
________________________________________________________
Xerox Sales Representative
X
X
X
________________________________________________________
Xerox Customer Service Representative
X
X
X
X
X
X
X
X
Primary customer WorkCentre 5325/5330/5335 applications:
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
Special considerations or performance limitations identified by
Xerox and agreed to by the customer:
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
I have reviewed this document and understand the specifications
listed:
________________________________________________________
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising