BLIXER 5 VV

BLIXER 5 VV
BLIXER 5 Plus • BLIXER 5 V.V.• BLIXER 6 V.V.
SUMMARY
WARRANTY
HYGIENE
IMPORTANT WARNING
CLEANING
INTRODUCTION TO YOUR
NEW EMULSIFIER-MIXER
BLIXER 5 Plus - BLIXER 5 V.V.
BLIXER 6 V.V.
MOTOR BASE
BOWL
BLADE
SCRAPER ARM
SWITCHING ON THE MACHINE
MAINTENANCE
ADVICE ON ELECTRICAL CONNECTIONS
CONTROL PANEL
ASSEMBLY
TECHNICAL SPECIFICATIONS
DESCRIPTION AND ADVANTAGES
PACKAGING
WEIGHT
DIMENSIONS
WORKING HEIGHT
NOISE LEVEL
USES AND EXAMPLES
BLADE
SCRAPER ARM
MOTOR SEAL
SAFETY
STANDARDS
ELECTRICAL DATA
TECHNICAL DATA
EXPLODED VIEWS
ELECTRICAL AND WIRING DIAGRAMS
3
ROBOT-COUPE S.N.C., LIMITED WARRANTY
Your new ROBOT-COUPE appliance is warranted to the original buyer for a period of
one year from the date of sale if you
bought it from ROBOT-COUPE S.N.C.
If you bought your ROBOT-COUPE product
from a distributor your product is covered
by your distributor’s warranty (Please check
with your distributor terms and conditions
of the warranty).
The ROBOT-COUPE S.N.C. limited warranty
is against defects in material and/or workmanship.
2 - Labour to sharpen and/ or replacements for
blades which have become blunt, chipped or
worn after a normal or excessive period of use.
3 -
Materials or labour to replace or repair
scratched, stained, chipped, pitted, dented or
discoloured surfaces, blades, knives, attachments
or accessories.
1 -
Damage caused by abuse, misuse, dropping, or other similar damage caused by or
resulting from failure to follow assembly, operating, cleaning, user maintenance or storage instructions.
4
SHIPPING DAMAGES. Visible and latent
defects are the responsibility of the freight carrier.
The consignee must inform the carrier and consignor immediately, or upon discovery in the case
of latent defects.
KEEP ALL ORIGINAL CONTAINERS AND
PACKING MATERIALS FOR CARRIER INSPECTION.
4 - Any
alteration, addition or repair that has
not been carried out by the company or an
approved service agency.
5 - Transportation of the appliance to or from an
approved service agency.
THE FOLLOWING ARE NOT COVERED
BY THE ROBOT-COUPE S.N.C.
WARRANTY:
8 -
Neither ROBOT-COUPE S.N.C. nor its affiliated
companies or any of its distributors, directors,
agents, employees, or insurers will be liable for
indirect damage, losses, or expenses linked to the
appliance or the inability to use it.
6 - Labour charges to install or test new attachments or accessories (i.e., bowls, discs, blades, attachments) which have been arbitrarity replaced.
7 - The cost of changing direction-of-rotation of
three-phase electric motors (Installer is responsible).
The ROBOT-COUPE S.N.C. warranty is given expressly and in lieu of all other warranties, expressed or implied, for merchantability and for fitness toward a particular purpose and constitutes the only
warranty made by ROBOT-COUPE S.N.C.
France.
IMPORTANT WARNING
W A R N I N G
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse
of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to
know your appliance and enable you to use the equipment correctly. Please read these instructions in their entirely and make sure that
anyone else who may use the mixer also reads them beforehand.
UNPACKING
HANDLING
• Never place the motor unit in water.
• Carefully remove the equipment from the packaging and take out all the boxes or packets containing
attachments or specific items.
• Always take care when handling the blades or
discs - they are very sharp.
• For parts made of aluminum alloys, use cleaning
fluids suitable for aluminum.
• WARNING - some of the tools are very sharp e.g.
blade, discs... etc.
ASSEMBLY PROCEDURES
• For plastic parts , do not use detergents that are too
alkaline (i.e., containing too much caustic soda or
ammonia...)
INSTALLATION
• We recommend you install your machine on a perfectly stable solid base.
CONNECTION
• Always check that your mains supply corresponds
to that indicated on the rating plate on the motor unit
and that it can take the amperage.
• The machine must be earthed.
• With the three-phased version, always check that
the blade rotates in an anti-clockwise direction.
• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.
USE
• Never try to override the locking and safety systems.
• Never introduce any object into the container
where the food is being processed.
• Never push the ingredients down with your hand.
• Do not overload the appliance.
• Never switch the appliance on while it is empty.
CLEANING
• As a precaution, always unplung your appliance
before cleaning it.
• Always clean the appliance and its attachments at
the end of each cycle.
• Robot-Coupe can in no way be held responsible
for the user’s failure to follow the basic rules of cleaning and hygiene.
MAINTENANCE
• Before opening the motor housing, it is absolutely
vital unplung the appliance.
• Check the seals and washers regularly and ensure
that the safety devices are in good working order.
• It is particularly important to maintain and check
the attachments since certain ingredients contain corrosive agents e.g. citric acid.
• Never operate the appliance if the power cord
or plug has been damaged in any way or if the appliance fails to work properly or has been damaged
in any way.
• Do not hesitate to contact your local Maintenance
Department if something appears to be wrong.
5
INTRODUCTION TO YOUR
NEW EMULSIFIER-MIXER
BLIXER 5 Plus - BLIXER 5 V.V BLIXER 6 V.V.
ROBOT-COUPE has developed a new concept in
appliance: the BLIXER®.
The BLIXER combines the features of two well-known
appliances: the cutter and the blender-mixer.
The BLIXER is perfectly geared to professional needs.
It can perform any number of tasks which you will
soon discover as you use it.
The BLIXER will make it easy to prepare mixed liquid
or semi-liquid, raw or cooked meals.
The BLIXER replace the blender which does not give
entire satisfaction because of its incapacity to process
solid foods.
Thanks to its simple design, all components requiring
frequent handling for maintenance or cleaning are
easily fitted or removed.
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
This manual contains important information designed
to help the user get the most out of their device.
We therefore recommend that you read it carefully
before using your machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNNECTIONS
Before plugging in, check that your power supply corresponds to that indicated on the machine’s identification plate.
6
W A R N I N G
This appliance must be plugged into an
earthed socket (risk of electrocution).
• THREE PHASE BLIXER 5 Plus
The BLIXER 5 Plus is available with the following motor ratings:
230 x 400 V / 50 Hz / 3
400 V / 50 Hz / 3
220 V / 60 Hz / 3
380 V / 60 Hz / 3
This machine is supplied with a cable to which you
simply attach the appropriate electrical plug or isolator for your system. The cable has four wires, one
earth wire, plus three phases wires.
If you have a 4-pin plug:
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
• SINGLE PHASE BLIXER 5 Plus
The BLIXER 5 Plus is available with motor ratings :
230 V/50 Hz / 1
220 V/60 Hz / 1
The machine comes with a single phase plug connected to a power cord.
• SINGLE PHASE BLIXER 5 V.V./BLIXER 6 V.V.
The BLIXER 5 V.V. and BLIXER 6 V.V. are available
with motor ratings +
variable speed : 230 V / 50-60 Hz / 1
The standardized plug must be calibrated to a minimum of 13 amps and preferably 20 amps, if the
appliance is used intensively.
• CONTROL PANEL
Red switch
= Off switch
Green switch
= On switch
Three phase BLIXER 5 Plus - BLIXER 5 V.V.
BLIXER 6 V.V.: Pulse control
Three phase BLIXER 5 Plus:
Speed selector = 1.500 or 3.000 rpm.
Single phase BLIXER 5 Plus: One speed 3.000 rpm
BLIXER 5 V.V. - BLIXER 6 V.V.: Speed variation from
300 to 3.000 rpm.
If you have more than 4 pins in the plug, please
note the ROBOT-COUPE does not require a neutral
wire.
ASSEMBLY
1) With the motor base
facing you, position the
cutter bowl on the motor
base.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
If the blade turns in a clockwise direction, swap over
two wires.
GREEN YELLOW is the earth,
DO NOT DISCONNECT
Swap either : the 1 and the 2
the 1 and the 3
or the 2 and the 3
2) Turn the bowl to the
right until it locks.
3) Engage the blade on
the motor shaft and lower it right to the bottom
of the bowl.
Make sure that it is correctly positioned, by rotating it in the bowl.
- A patented blade, an exclusive ROBOT-COUPE
feature, gives perfect result for small or large
quantities.
• PACKAGING
- Central bowl hub specially designed for processing
liquids.
Details of the contents are clearly marked on the
packaging:
- type of device;
- voltage;
- attachments (if any);
- serial number;
- Tight-sealed lid with scraper arm.
- New blade profile for optimum cutting quality.
- Pulse control for better cutting precision.
- Automatic bowl locking.
4) Place the lid on the
bowl and rotate to the
right until it clicks.
- Extremely simple unlocking of bowl by means of a
trigger fitted in the handle.
The device is now ready
for use.
- Lid designed to allow the addition of liquid or ingredients during processing.
- Models BLIXER 5 Plus and BLIXER 5 V.V. are equipped with a slightly serrated blade.
- Model BLIXER 6 V.V. is supplied with an all
stainless steel slightly serrated blade knife that is
fully removable .
- Flat motor base for easier fitting and cleaning of attachments.
TECHNICAL
SPECIFICATIONS
• DESCRIPTION AND ADVANTAGES
- 5.5-litre stainless steel bowl for models BLIXER 5 Plus
and BLIXER 5 V.V.
- 6.5-litre stainless steel bowl for model BLIXER 6 V.V.
- Model BLIXER 5 Plus (three-phase) is provided with
two speeds1.500 and 3.000 rpm.
- Model BLIXER 5 Plus (single-phase) is provided with
one speed of 3.000 rpm.
- Models BLIXER 5 V.V. and BLIXER 6 V.V. are equipped with an speed variation which varies between
300 and 3.000 rpm to ensure more flexible use
and give a wide range of tasks.
The packaging for these models has been specially
designed to prevent damage occurring in transit.
Dimensions (in mm):
Heigh 580 x Lenght 500 x Width 400
• WEIGHT
net weight
gross weight
BLIXER 5 Plus
24 kg
26 kg
BLIXER 5 V.V.
24 kg
26 kg
BLIXER 6 V.V.
26 kg
28 kg
• DIMENSIONS (in mm)
BLIXER 5 Plus
A = 480
C = 280
B = 340
D = 265
BLIXER 5 V.V.
A = 480
C = 280
B = 340
D = 265
BLIXER 6 V.V.
A = 520
C = 280
B = 380
D = 265
• WORKING HEIGHT
We recommend that you position the machine on a
stable worktop so that the upper edge of the large feed
hopper is at a height of between 1.20 m and 1.30 m.
7
• NOISE LEVEL
The equivalent continuous sound level when the
machine is operating on no-load is less than 70 db (A).
USES AND EXAMPLE
The BLIXER 5 Plus - BLIXER 5 V.V. - BLIXER 6 V.V. will
enable you to perform all your cutting tasks in minimum time; we recommend therefore that you keep a
close eye on the mixture in order to obtain the desired results.
HOSPITAL USES:
SPOON FEEDING
• Minced foods: meat, fish... • Vegetable purees
• Mousses: vegetables, fish... • Compotes of stewed fruit
SEMI-LIQUID FEEDING
This simply entails diluting spoon-feeding preparations:
• Minced meat + gravy • Puree + liquid (broth, milk...)
• Soups / creamed soups • Fruit compotes + syrup or water
LIQUID FEEDING (for use via tubes)
• Soups and any preparations that can be liquidized.
RESTAURANTS AND DELICATESSEN USES:
• Butter mixtures: snail butter, salmon butter, anchovie butter…
• Sauces: green sauce, mayonnaise, remoulade, ailloli, emulsify
sauces with tomatoes, cream, parsley…
• Grinding: lobster, scampi, seashells...
PHARMACEUTICAL AND CHEMICAL
LABORATORY USES:
• Grinding: herbs, seeds, powders, tablets....
• Mixing: homogeneization of creams, ointments, mixed
components, varied ingredients...
8
HYGIENE
At each step of food processing, the machine and attachments must be clean.
A certain order when processing foods must be followed. In general, always try to process foods that are
least likely to cause cross-contamination first, as illustrated in the following example:
1 - Cooked meat
- Terrines/mousses
- Delicatessen
• ham
• smoked ham
• sausage.
2 - Cheese
• hard
• other type.
3 - Vegetables.
It is vital that all parts of the machine that come into
contact with food are cleaned meticulously, using a
detergent/sanitiser, after each processing job.
• MOTOR BASE
Never immerse the motor base in water. Clean
using a damp cloth or sponge.
• BOWL
After removing the lid, remove the bowl from the motor
base by pushing the trigger fitted in the handle. Pull up
to disengage, leaving the blade in the bowl in order to
prevent any spillage when working with liquids.
If the food has a solid consistency, remove the blade
and empty the bowl.
Replace the bowl, place the blade back on the shaft
and switch on the machine in order to remove any
mixture which may have stuck to the blade.
If you wish, you can rinse the bowl by filling it with
hot water and switching on for a few minutes.
• BLADE
The stainless steel blade of BLIXER 6 V.V. is easy to
dismantle and to clean.
• WARNING: NEVER USE PURE BLEACH.
Always follow the detergent manufacturers instructions
to make up the correct strength of solution; these are
normally found on the detergent package, if in doubt
contact your detergent supplier or manufacturer.
- If necessary rub well with a soft brush or cloth:
NEVER use a harsh abrasive cleaning pad.
- Allow the detergent/sanitiser to work for the required length of time.
- Always rinse well.
- Dry well with a soft clean cloth. Only air dry if the
detergent manufacturer recommends it.
CLEANING
W A R N I N G
As a precaution, always unplug your appliance
before cleaning it (risk of electrocution).
Ensure power supply to machine is disconnected.
1 - Place blade dismantling tool over shaft onto
motor base.
2 - Fit blade onto shaft ensuring it is correctly positioned.
3 - Insert bar into blade cap and turn anti-clockwise to dismantle .
When re-assembling do not over tighten.
A - Upper blade with sharp edge away from you.
B - Lower blade with sharp edge towards you.
MAINTENANCE
After cleaning the blade, always dry the blades well
to prevent rusting.
• BLADE
• SCRAPER ARM
To clean the scraper arm, dismantle it as follows.
Hold the scraper arm in one hand and the hub in the
other hand (drawing1). Press the two pieces one on
the other, and turn the handle of 45o anticlockwise
(draw-ing 2). Then it is possible to pull out the two
pieces (the scraper arm and the handle) from the lid
and clean them (drawing 3).
The quality of the cut depends mainly on the sharpness of your blades and the degree of wear. The
blades are actually wearing parts, which should be
replaced occasionally to ensure consistent quality in
the final product.
• SCRAPER ARM
The scraper arm is equipped with rubber pieces
which are wearing parts. They should be replaced
occasionally to always ensure an optimum efficiency
of the scraper arm.
These pieces are easy to dismantle and to reassemble.
These models are fitted with a magnetic safety
device and motor braking system.
As soon as you open the lid the motor stops.
To restart the machine, simply close the lid and press
the green switch.
In order to avoid splashing when processing liquid
preparation, we recommend you stop the machine
before opening the lid.
The blades are extremely sharp. Handle with
care.
All the models are fitted with a thermal cut-out which
automatically stops the motor if the machine is left on
for too long or overloaded.
If this happens, allow the machine to cool completely
before restarting.
Drawing 2
Rubber piece to scrape
the bowl
Drawing 3
I M P O R T A N T
Check that your detergent is suitable for cleaning
plastic parts. Some washing agents are too alkaline (e.g. high levels of caustic soda or ammonia)
and totally incompatible with certain types of plastic, causing them to deteriorate rapidly.
SAFETY
W A R N I N G
Rubber pieces to
scrape the lid.
Drawing 1
The motor seal can be easily replaced without having
to remove the motor, so we strongly advise you to
ensure that is in good condition.
• MOTOR SEAL
The motor seal on the shaft should be lubricated regularly using a food safe lubricant.
In order to keep the motor completely watertight, it is
advisable to check the motor seal regularly for wear
and tear and replace if necessary.
R E M E N B E R
Never try to override the locking and safety
systems.
Never introduce any object into the container
where the food is being processed.
Never push the ingredients down with your
hand.
Do not overload the appliance.
Never switch the appliance on while it is
empty.
9
STANDARDS
ELECTRICAL
DATA
MACHINES IN COMPLIANCE WITH:
• The following European directives and related
national legislation:
- Modified "machinery" directive 98/37/EEC,
- "Low voltage" directive 73/23/EEC,
- "EMC" directive 89/336/EEC,
- "Materials and parts in food contact" directive
89/109/EEC,
- "Plastic materials and parts in food contact" directive 90/128/EEC.
• The following European harmonized standards
and standards setting out health and safety
rules:
- EN 292 - 1 and - 2,
- EN 60204 -1 (1992),
- For Food Processors and blenders: EN 12852.
INDEXES OF PROTECTION:
- IP 55 for the switches.
- IP 34 for the machines.
BLIXER 5 Plus three-phase machine
Motor
230 x 400 V /
50 Hz
400 V /50 Hz
220 V /60 Hz
380 V /60 Hz
Speed
1
(rpm)
Speed
2
(rpm)
Power
(watts)
1500
1300
230 V=4,0
400 V=2,5
230 V=7,0
400 V=4,0
950
2,7
1300
3,4
950
4,7
1300
6,5
950
2,5
1300
3,4
950
3000
1500
3000
1800
3000
1800
3000
Intensity
(Amp.)
BLIXER 5 Plus single-phase machine
Motor
Speed
(rpm)
Power
(watts)
Intensity
(Amp.)
230 V / 50Hz
3000
1200
18,5
BLIXER 5 V.V./BLIXER 6 V.V. single-phase machines
10
Motor
Speed
(rpm)
Power
(watts)
Intensity
(Amp.)
230 V / 50-60 Hz
300 to 3000
1400
12
BLIXER 6 V.V. single-phase machines
Motor
Speed
(rpm)
Power
(watts)
Intensity
(Amp.)
230 V / 50-60 Hz
300 to 3000
1500
13
BLIXER 5 A Plus
Triphasé
11
* voir tarif machines / See export price list
03/1999
12
BLIXER 5 A Plus
Triphasé
* voir tarif machines / See export price list
02/2000
MAJ : 02/2000
a
BLIXER 5 A Plus
Monophasé
13
* voir tarif machines / See export price list
03/1999
14
BLIXER 5 A Plus
Monophasé
* voir tarif machines / See export price list
03/1999
BLIXER 5 V.V. A
15
* voir tarif machines / See export price list
03/1999
16
BLIXER 5 V.V. A
* voir tarif machines / See export price list
02/2000
MAJ : 02/2000
a
BLIXER 6 V.V. A
27
27
17
* voir tarif machines / See export price list
02/1998
18
BLIXER 6 V.V. A
02/2000
MAJ : 02/2000
b
03/1999
19
20
21
22
We reserve the right to alter at any time without notice the technical specifications of this appliance.
© All rights reserved for all countries by: ROBOT-COUPE S.N.C.
Tél. : 03 85 69 50 00 - Fax : 03 85 69 50 07 Tél. : 01 43 98 88 15 - Fax : 01 43 74 36 26
12, avenue du Maréchal Leclerc - BP 134
13, rue Clément Viénot
71305 Montceau-en-Bourgogne Cedex
94305 Vincennes Cedex
email : france@robot-coupe.fr
Export Department
Tel. : + 33 1 43 98 88 33 - Fax : + 33 1 43 74 36 26
18, rue Clément Viénot - BP 157
94305 Vincennes Cedex - France
http://www.robot-coupe.fr - email : international@robot-coupe.com
Réf. 405692 - 09/2001- Blixer 5 Plus / Blixer 5 V.V. / Blixer 6 V.V.
FABRIQUÉ EN FRANCE PAR ROBOT-COUPE S.N.C.
Administration Commerciale France Agence de Service Après-Vente
& Service Après-Vente
pour la Région Parisienne
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising