user instructions
DRYER
USER INSTRUCTIONS
GTN 39250 GCW
EN
www.grundig.com
TABLE OF CONTENTS
1. Please read this user manual first!3
2. Important safety and
environmental instructions...4
2.1 General safety . . . . . . . . . . . . . . . 4
2.1.1 Electrical safety . . . . . . . . . . . 5
2.1.2 Product safety . . . . . . . . . . . . .6
2.2 Mounting over a washing
machine . . . . . . . . . . . . . . . . . . . 8
2.3 Intended use . . . . . . . . . . . . . . . . 8
2.4 Child safety . . . . . . . . . . . . . . . . . 9
2.5 Compliance with the WEEE
regulation and disposing of the
waste product . . . . . . . . . . . . . . . 9
2.6 Compliance with RoHS Directive 9
2.7 Package information . . . . . . . . . 9
2.8 Technical specifications . . . . . . 10
3 Your Dryer
11
3.1 Package Contents . . . . . . . . . . . 11
4 Installation
12
4.1 Appropriate installation location12
4.2 Removing the transportation
safety assembly . . . . . . . . . . . . 12
4.3 Connecting to the drain . . . . . . 13
4.4 Adjusting the feet . . . . . . . . . . . 13
4.5 Electrical connection . . . . . . . . 14
4.6 Transporation of the dryer . . . . 14
4.7 Warnings about sounds . . . . . . 14
4.8 Changing the illumination lamp14
5 Preparation
15
5.1 Laundry suitable for drying in the
dryer . . . . . . . . . . . . . . . . . . . . . 15
5.2 Laundry not suitable for drying in
the dryer . . . . . . . . . . . . . . . . . . 15
5.3 Preparing laundry for drying . . 15
5.4 Things to be done for energy
saving . . . . . . . . . . . . . . . . . . . . 15
5.5 Correct load capacity . . . . . . . . 16
6 Operating the product
17
6.1 Control panel . . . . . . . . . . . . . . . 17
6.2 Display Symbols . . . . . . . . . . . . 17
6.3 Preparing the machine . . . . . . . 18
6.4 Programme selection . . . . . . . . 18
6.5 Main programmes . . . . . . . . . . 18
6.6 Additional programmes . . . . . .19
6.7 Programme selection and
consumption table . . . . . . . . . . 21
6.8 Auxiliary functions . . . . . . . . . . 22
6.9 Warning symbols . . . . . . . . . . . 22
6.10 Starting the programme . . . . 23
6.11 Child Lock . . . . . . . . . . . . . . . . 23
6.12 Changing the programme
after it has started . . . . . . . . . . . 24
6.13 Cancelling the programme . . 25
6.14 End of programme . . . . . . . . . 25
7 Maintenance and cleaning
26
7.1 Lint Filter / Loading Door Inner
Surface . . . . . . . . . . . . . . . . . . . 26
7.2 Cleaning the sensors . . . . . . . . 27
7.3 Draining the water tank . . . . . . 27
7.4 Cleaning the filter drawer . . . . 28
7.5 Cleaning the evaporator . . . . . . 29
8 Troubleshooting
30
9 Electrical Connection
32
1. Please read this user manual first!
Dear Customer,
Thank you for preferring an Grundig product. We hope that your
product which has been manufactured with high quality and
technology will give you the best results. We advise you to read
through this manual and the other accompanying documentation
carefully before using your product and keep it for future
reference. If you transfer the product to someone else, give its
manual as well. Pay attention to all details and warnings specified
in the user manual and follow the instructions given therein.
Remember that this user manual is also applicable for several
other models. Differences between models will be identified in the
manual.
Read the instructions.
Explanation of symbols
Throughout this user manual the following symbols are used:
information or useful hints about usage.
C Important
for hazardous situations with regard to life and
property.
A Warning
B Warning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Packaging of the product is made of recyclable materials
pursuant to our national environment legislation.
Do not dispose of the packaging wastes with the domestic waste
or other wastes, discard them to the dedicated collection points
designated by the local authorities.
2. Important instructions for safety and
environment
This section contains safety instructions that will help protect
from risk of personal injury or property damage. Failure to follow
these instructions shall void any warranty.
2.1 General safety
•The dryer can be used by children at and above 8 years old
and by persons whose physical, sensory or mental capabilities
were not fully developed or who lack experience and knowledge
provided that they are supervised or trained on the safe usage
of the product and the risks it brings out. Children should not
play with the product. Cleaning and maintenance works should
not be performed by children unless they are supervised by
someone.
•Children of less than 3 years should be kept away unless
continously supervised.
•Adjustable feet should not be removed. The gap between the
dryer and the floor should not be reduced with materials such
as carpet, wood and tape. This will cause problems with the
dryer.
•Always have the installation and repairing procedures carried
out by the Authorized Service. Manufacturer shall not be held
liable for damages that may arise from procedures carried out
by unauthorized persons.
•Never wash the dryer by spraying or pouring water onto it!
There is the risk of electric shock!
4
2.1.1 Electrical safety
Electrical safety instructions should be followed while
electrical connection is made during the installation.
A
EN
•Connect the dryer to a grounded outlet protected by a fuse
at the value specified on the type label. Have the grounding
installation performed by a qualified electrician. Our company
shall not be liable for any damages that will arise when the
dryer is used without grounding in accordance with the local
regulations.
•The voltage and allowed fuse protection is stated on the type
label plate.
•The voltage specified on the type label must be equal to your
mains voltage.
•Unplug the dryer when it is not in use.
•Unplug the dryer from the mains during installation,
maintenance, cleaning and repair works.
•Do not touch the plug with wet hands! Never unplug by pulling
on the cable, always pull out by grabbing the plug.
•Do not use extension cords, multi-plugs or adaptors to connect
the dryer to power supply in order to decrease the risk of fire
and electric shock.
•Power cable plug must be easily accessible after installation.
mains cable should be changed notifying the
Authorized Service.
B Damaged
If the dryer is faulty, it must not be operated unless it
by an authorized service agent! There is the
B isriskrepaired
of electric shock!
5
2.1.2 Product safety
Superheating of the clothes inside of the dryer can occur
if you cancel the programme or in the event of a power
failure whilst the dryer is running, this concentration
of heat can cause self-combustion and fire so always
activate the ventilation programme to cool down or
quickly remove all laundry from the dryer in order to hang
them up and dissipate the heat.
Points to be taken into consideration for fire hazard:
Below specified laundry or items must not be dried
in the dryer considering fire hazard.
•Unwashed laundry items
•Items soiled with oil, acetone, alcohol, fuel oil,
kerosene, stain removers, turpentine, paraffin or
paraffin removers must be washed in hot water with
plenty of detergent before being dried in the dryer.
For this reason especially the items containing the above
specified stains must be washed very well, to do this
use adequate detergent and choose a high washing
temperature.
Below specified laundry or items must not be dried in the dryer
due to the fire hazard:
•Garments or pillows bolstered with rubber foam
(latex foam), shower bonnets, water resistant textiles,
materials with rubber reinforcement and rubber foam
pads.
•Clothing cleaned with industrial chemicals.
Items such as lighter, match, coins, metal parts, needle
etc. may damage the drum set or may lead to functional
problems. Therefore check all the laundry that you will
load into your dryer.
Never stop your dryer before the programme completes.
If you must do this, remove all laundry quickly and lay
them out to dissipate the heat.
Clothes that are washed inadequately may ignite on
their own and even may ignite after drying ends.
6
•You must provide enough ventilation in order to prevent
gases exiting from devices operating with other types of fuels
including the naked flame from accumulating in the room due
to the back fire effect.
EN
that contains metal reinforcements should
A Underwear
not be dried in the dryer. Dryer may be damaged if metal
reinforcements come loose and break off during drying.
C
C
Use softeners and similar products in accordance with
the instructions of their manufacturers.
Always clean the lint filter before or after each loading.
Never operate the dryer without the lint filter installed.
•Never attempt to repair the dryer by yourself. Do not perform
any repair or replacement procedures on the product even if
you know or have the ability to perform the required procedure
unless it is clearly suggested in the operating instructions or the
published service manual. Otherwise, you will be putting your
life and others’ lives in danger.
•There must not be a lockable, sliding or hinged door that may
block the opening of the loading door in the place where your
dryer is to be installed.
•Install your dryer at places suitable for home use. (Bathroom,
closed balcony, garage etc.)
•Make sure that pets do not enter the dryer. Check the inside of
the dryer before operating it.
•Do not lean on the loading door of your dryer when it is open,
otherwise it may fall over.
•The lint must not be allowed to accumulate around the tumble
dryer
7
2.2 Mounting over a washing machine
•A fixing device should be used between the two machines when
installing the dryer above a washing machine. The fitting device
must be installed by the authorized service agent.
•Total weight of the washing machine and the dryer -with full
load- when they are placed on top of each other reaches to
approx. 180 kilograms. Place the products on a solid floor that
has sufficient load carrying capacity!
A
Washing machine cannot be placed on the dryer. Pay
attention to the above warnings during the installation on
your washing machine.
Installation Table for Washing Machine and Dryer
Dryer Depth
Washing Machine Depth
62 cm 60 cm 54 cm 50 cm 49 cm 45 cm
54 cm
Can be stacked
60 cm
Can be stacked
40 cm
Can be stacked
Cannot be
stacked
Cannot be
stacked
2.3 Intended use
•Dryer has been designed for domestic use. It is not suitable for
commercial use and it must not be used out of its intended use.
•Use the dryer only for drying laundry that are marked
accordingly.
•The manufacturer waives any responsibility arisen from
incorrect usage or transportation.
•The service life of the dryer that you purchased is 10 years.
During this period, original spare parts will be available to
operate the dryer properly.
2.4 Child safety
•Packaging materials are dangerous for the children. Keep
packaging materials away from children.
•Electrical products are dangerous for the children. Keep
children away from the product when it is operating. Do not let
them tamper with the dryer. Use the child-proof lock in order to
prevent the children to tamper with the dryer.
8
C
Child-proof lock is on the control panel. (See Child lock) EN
•Keep loading door closed even when the dryer is not in use.
2.5 Compliance with the WEEE regulation
and disposing of the waste product
This product complies with EU WEEE Directive (2012/19/
EU). This product bears a classification symbol for waste
electrical and electronic equipment (WEEE).
This product has been manufactured with high quality
parts and materials which can be reused and are suitable
for recycling. Do not dispose of the waste product with
normal domestic and other wastes at the end of its service life.
Take it to the collection center for the recycling of electrical and
electronic equipment. Please consult your local authorities to
learn about these collection centers.
2.6 Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS
Directive (2011/65/EU). It does not contain harmful and
prohibited materials specified in the Directive.
2.7 Package information
Packaging materials of the product are manufactured
from recyclable materials in accordance with our National
Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take them
to the packaging material collection points designated by the
local authorities.
9
2.8 Technical Specifications
EN
Height (Min. / Max.)
Width
Depth
Capacity (max.)
Net weight (plastic front door usage)
Net weight (glass front door usage)
Voltage
Rated power input
Model code
84,6 cm / 86,6 cm*
59,5 cm
59,8 cm
9 kg**
51,5 kg
53,5 kg
See type label***
* Min. height: Height with adjustable feet are closed.
Max. height: Height with adjustable feet are opened maximum.
** Dry laundry weight before washing.
*** Type label is located behind the loading door.
C
C
C
10
Technical specifications of the dryer are subject to
specification without notice to improve the quality of the
product.
Figures in this manual are schematic and may not match
the product exactly.
Values stated on markers on the dryer or in the other
published documentation accompanying with the dryer
are obtained in laboratory in accordance with the relevant
standards. Depending on operational and environmental
conditions of the dryer, these values may vary.
3. Your Dryer
EN
3.1 Package Contents
1
2
3
4
5
1. Water drain hose *
2. Filter drawer spare sponge*
3. User Manual
4. Drying basket*
5. Drying basket user manual*
*It can be supplied with your machine depending on its model.
11
4. Installation
Before the calling the nearest
Authorized Service for the
installation of the dryer, ensure that
electrical installation and water drain
is appropriate referring to the user's
manual. (See 4.3 Connecting to the
drain and 4.5 Electrical connection)
If they are not suitable, contact a
qualified electrician and technician to
make necessary arrangements.
C
A
A
Preparation of the dryer's
location as well as the
electrical and waste water
installations is under
customer's responsibility.
Prior to installation, visually
check if the dryer has any
defects on it. If the drier
is damaged, do not have
it installed. Damaged
products cause risks for
your safety.
Let your dryer wait for 12
hours before starting to use
it.
4.1 Appropriate installation
location
• Install the dryer on a stable and
level surface.
• Dryer is heavy. Do not move it by
yourself.
• Operate your dryer in a well
ventilated, dust-free environment.
• The gap between the dryer and
the surface should not be reduced
by the materials such as carpet,
wood and tape.
• Do not cover the ventilation grills
of the dryer.
12
• There must not be a lockable,
sliding or hinged door that may
block the opening of the loading
door in the place where your
dryer is to be installed.
• Once the dryer is installed, it
should stay at the same place
where its connections have been
made. When installing the dryer,
make sure that its rear wall does
not touch anywhere (tap, socket,
etc.).
• Place the dryer at least 1 cm
away from the edges of other
furniture.
• Your dryer can be operated at
temperatures between +5°C and
+35°C. If the operating conditions
fall outside of this range,
operation of the dryer will be
adversely affected and it can get
damaged.
• The rear surface of the tumble
dryer shall be placed against a
wall.
B
Do not place the dryer on the
power cable.
4.2 Removing the transportation
safety assembly
A
Remove the transportation
safety assembly before
using the dryer for the first
time.
• Open the loading door.
• There is a nylon bag inside the
drum that contains a piece of
styrofoam. Hold it from its section
marked with XX XX.
• Pull the nylon towards yourself
and remove the transportation
safety assembly.
A
1
2
3
4
EN
Check that no part of
the transportation safety
assembly remains inside
the drum.
4.3 Connecting to the drain
In products equipped with condenser
unit, water accumulates in the water
tank during the drying cycle. You
should drain accumulated water
after each drying cycle.
You can directly drain accumulated
water through the water drain hose
supplied with the product instead
of periodically draining the water
collected in the water tank.
Please refer to the detailed
instructions supplied with the
accessories pack.
A
1-2Pull hose at the behind of
the dryer by hand in order to
disconnect it from where it is
connected. Do not use any tools
to remove the hose.
3 Connect one end of the drain
hose supplied with the dryer to
the connection point from where
you removed the hose of the
product in previous step.
4 Connect the other end of the
drain hose directly to the
wastewater drain or to the
washbasin.
4.4 Adjusting the feet
Connecting the water drain hose
C
C
Hose connection should be
made in a safe manner. Your
drain house will be flooded
if the hose comes out of
its housing during water
discharge.
Water drain hose should
be attached to a height of
maximum 100 cm.
Make sure that the water
drain hose is not stepped on
and it is not folded between
the drain and the machine.
• In order to ensure that the dryer
operates more silently and
vibration-free, it must stand level
and balanced on its feet. Balance
the machine by adjusting the feet.
• Turn the feet to left or right until
the dryer stands level and firmly.
C
Never unscrew the
adjustable feet from their
housings.
13
4.5 Electrical connection
For specific instructions for
electrical connection required during
installation (see 2.1.1 Electrical
Safety)
4.6 Transportation of the dryer
• Unplug the dryer before
transporting it.
• Drain all water that has remained
in the dryer.
If direct water drain connection
is made, then remove the hose
connections.
A
We recommend carrying the
dryer in upright position.
If it is not possible to carry
the machine in the upright
position, we recommend
carrying it by tilting towards
the right side when looked
from the front.
4.7 Warnings about sounds
14
C
It is normal to hear a
metallic noise from the
compressor sometimes
during operation.
C
Water collected during
operation is pumped to
water tank. It is normal to
hear pumping noise during
this process.
4.8 Changing the illumination
lamp
In case an illumination lamp is used
in your laundry dryer.To change
the Bulb/LED used for illumination
of your tumble dryer, call your
Authorized Service.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose
of this lamp is to assist the user to
place laundry in the tumble dryer in
a comfortable way. The lamps used
in this appliance have to withstand
extreme physical conditions such as
vibrations and temperatures above
50 °C.
5. Preparation
EN
5.1 Laundry suitable for drying in the dryer
• Always obey the instructions given on the garment tags. Dry only the
laundry having a label stating that they are suitable for drying in a dryer
and make sure that you select the appropriate programme.
LAUNDRY DRYING SYMBOLS
Do not dry
Do not dryclean
Dry-cleanable
Lay in shadow
to dry
Lay to dry
Hang to dry
Do not dry
with dryer
Hang wet to dry
Sensitive /
Delicate dry
Without heating
At low temperature
No Iron
At medium
temperature
At high temperature
Drying
Settings
Suitable for
dryer
At any temperature
Drying
Symbols
Maximum temperature
Iron at high
temperature
Iron at medium
temperature
200 0C
150 0C
5.2 Laundry not suitable for
drying in the dryer
C
Delicate embroidered
fabrics, woolen, silk
garments, delicate and
valuable fabrics, airtight
items and tulle curtains are
not suitable for machine
drying.
5.3 Preparing laundry for drying
• Laundry may be tangled with
each other after washing.
Separate the laundry items
before placing them into the
dryer.
• Dry garments having metal
accessories such as zippers,
inside out.
Iron at low
temperature
110 0C
Iron without
steam
IRON
Dry or Steam
Do not iron
Iron -
• Fasten the zippers, hooks and
buckles and button sheets.
5.4 Things to be done for energy
saving
Following information will help you
use the dryer in an ecological and
energy-efficient manner.
• Spin your laundry at the
highest speed possible when
washing them. Thus, the drying
time is shortened and energy
consumption is reduced.
• Sort out the laundry depending on
their type and thickness. Dry the
same type of laundry together.
For example thin kitchen towels
and table clothes dries earlier
than thick bathroom towels.
15
• Follow the instructions in the
user manual for programme
selection.
• Do not open the loading door of
the machine during drying unless
necessary. If you must certainly
open the loading door, do not to
keep it open for a long time.
• Do not add wet laundry while the
dryer is in operation
• Clean the lint filter before or
after each drying cycle. (See 7.1
Lint Filter / Loading Door Inner
Surface)
• Clean the filter periodically when
there is visible air collection on it
or when the symbol lights up, if
there is a filter drawer cleaning
warning symbol “ ” available.
(See 7.4 Cleaning the filter
drawer)
• Ventilate the room, where the
dryer is located, well during
drying.
5.5 Correct load capacity
Follow the instructions in the
“Programme selection and
consumption table”. Do not load
more than the capacity values stated
in the table.
16
C
It is not recommended
to load the dryer with
laundry exceeding the level
indicated in the figure.
Drying performance will
degrade when the machine
is overloaded. Furthermore,
dryer and the laundry can
get damaged.
Following weights are given as
examples.
Approximate
Laundry
weights (g)*
Cotton quit covers
1500
(double)
Cotton quit covers
1000
(single)
Bed sheets (double)
500
Bed sheets (single)
350
Large tablecloths
700
Small tablecloths
250
Tea napkins
100
Bath towels
700
Hand towels
350
Blouses
150
Cotton shirts
300
Shirts
250
Cotton dresses
500
Dresses
350
Jeans
700
Handkerchiefs (10
100
pieces)
T-Shirts
125
*Dry laundry weight before washing.
6. Operating the product
EN
6.1 Control panel
1
3
2
8
7
6
5
4
1. On/Off/Cancel button
2. Programme number indicator
3.Display
4. Start / Pause button
5. End time setting selection button
6. Audio warning level / Child lock button
7. Timer programmes selection button
8. Programme selection knob
6.2 Display Symbols
Remaining time indicator*
Filter Drawer Cleaning warning symbol
Filter cleaning warning symbol
Audio warning Symbol
Child Lock warning symbol
Water Tank warning symbol
End Time Symbol
Start / Pause symbol
Programme progress bar
*Time that appears on display indicates the remaining time
until the end of the programme and changes according to
the dampness level of the laundry and model of the dryer.
17
6.3 Preparing the machine
1. Plug in the machine.
2. Place the laundry in the machine.
3. Press the On/off/cancel button
for 1 second (long).
4. When your machine is operated
for the first time, it starts with the
default programme (wardrobe
dryness for cottons).
C
Pressing the On/Off/Cancel
button does not necessarily
mean the programme
has started. Press Start/
Pause button to start the
programme.
6.4 Programme selection
1. Decide the appropriate
programme from the table below
which includes drying levels.
2. Select the desired programme
with the Programme Selection
knob.
Only the cotton laundry
is dried at normal
temperature. Thick and
multi layered laundry
(towels, linens, jeans
Extra Dry
and etc.) are dried in
a way that they do not
require ironing before
being placed in the
wardrobe.
Normal laundry
(tablecloths, underwear
and etc.) are dried in
Cupboard
a way that they do not
Dry
require ironing before
being placed in the
wardrobe.
18
Normal laundry (E.g.:
tablecloths, underwear)
are dried in a way that
Cupboard they do not require
Dry +
ironing before placing in
the drawers, but more
than those in the ready
to wear option.
Iron Dry
C
Normal laundry (shirts,
dresses and etc.) are
dried ready to be ironed.
For further programme
details, see, "Programme
selection and consumption
table".
6.5 Main programmes
Depending on the fabric type, the
following main programmes are
available:
• Cottons
Dry durable laundry with this
programme. Dries at normal
temperature. It is recommended to
use for your cotton items (bed sheets,
quilt covers, towels, bathrobes, etc.).
•Synthetics
Dry less durable laundry with this
programme. Recommended for
synthetics.
6.6 Additional programmes
•Jeans
C
•Sportswear
For special cases, following
additional programmes are available
in the machine.
Additional programmes
may differ according to the
features of your machine.
•Bedding
Dry fiber quilts with ‘machinedryable’ label only. Make sure you are
loading the quilt in the correct way
to avoid damages on the machine
and the quilt. Take out the quilt
cover before loading the quilt in the
machine. Fold the quilt in two before
loading.
- Do not load more than 1 doublesize fiber quilt (200x200 cm). Do not
dry items containing cotton such as
quilts, pillows and etc.
- Do not dry items other than quilts
such as carpets, rugs or mats.
Permanent damage may arise in
your machine.
C
To obtain better results
from your dryer, your
laundry must be washed
with suitable programmes
and spun at the
recommended spin speeds
in the washing machine.
•Shirts
This programme dries the shirts
more sensitively and creases them
less and thus, helps to iron them
more easily.
C
There may be a little
moisture on the shirts at
the end of the programme.
We recommend you not to
leave the shirts in the dryer.
Use this programme to dry your
jeans that are spun at high speeds in
the washing machine.
EN
Use this programme to dry together
the synthetic and cotton laundry
items and the laundry items made of
mixed fabrics.
•Wool Refresh
Use this programme to ventilate and
soften the woollen laundry that can
be washed in the washing machine.
Do not use to dry the laundry
completely. Take out and ventilate
the laundry immediately after the
programme is over.
•Daily
This programme is used to dry
cottons and synthetics daily, and lasts
for 100 minutes.
•Shirts 30’
Use this programme to make 2 shirts
ready for ironing in 30 minutes.
•Delicates
You can dry your highly delicate
laundry (silk blouses, fine underwear,
etc.) that are suitable for drying or
laundry which is advised to be handwashed at a lower temperature.
C
It is recommended to
use a cloth bag to avoid
certain delicate garments
and laundry from getting
creased or damaged. Take
your laundry immediately
out of the dryer and hang
them after the programme
ends in order to prevent
them being creased.
19
•Freshen Up
Only ventilation is performed for 10
minutes without blowing hot air. You
can air the clothes that have been
kept in closed environments for a
long time and deodorize unpleasant
odours thanks to this programme.
•Timer Programmes
You can select one of the 10 min., 20
min., 30 min., 40 min., 50 min., 60
min., 80 min., 100 min., 120 min., 140
min. and 160 min. timer programmes
to achieve the desired final drying
level at low temperatures.
C
20
With this programme, the
machine dries for the time
selected regardless of the
dryness level.
6.7 Programme selection and consumption table
EN
EN
Capacity Spin speed in was- Approximate amount
(kg)
hing machine (rpm) of remaining humidity
Programs
Drying time (minutes)
Cottons / Coloreds
A Extra dry
9
1000
% 60
195
9 / 4,5
1000
% 60
185 / 108
9
1000
% 60
150
Shirt 30’
0.5
1200
% 60
30
Shirts
1.5
1200
% 50
40
Jeans
4
1200
% 50
110
2.5
1000
% 40
120
Sportswear
4
1000
% 60
105
Daily
4
1200
% 50
100
Delicates
2
600
% 40
45
1.5
600
% 50
8
B Cupboard dry
4
800
% 40
75
B Iron dry
4
800
% 40
70
A Cupboard dry
A Iron dry
Bedding
Wool Refresh
Synthetics
Energy consumption values
Energy
Capacity Spin speed in was- Approximate amount
consumption value
(kg)
hing machine (rpm) of remaining humidity
kWh
Programs
Cottons linen Ready to wear* 9 / 4,5
1000
% 60
2,1 / 1,1
Cottons Ready to iron
9
1000
% 60
1,5
Synthetics Ready to wear
4
800
% 40
0,75
Power consumption of the off-mode for the standard cotton programme at full load,
PO (W)
0,5
Power consumption of the left-on mode for the standard cotton programme at full
load, PL (W)
1,0
Contains fluorinated greenhouse gases covered by the Kyoto Protocol.
Hermetically sealed. R134a / 0,53 kg
„Cotton cupboard dry programme“ used at full and partial load is the standard
drying programme to which the information in the label and the fiche relates, that
this programme is suitable for drying normal wet cotton laundry and that it is the
most efficient programme in terms of energy consumption for cotton.
C
When selecting the Cottons programme, send the condensed water
out through the drain hose.
21
* : Energy Label standard programme (EN
61121:2012)
All values given in the table have been
fixed according to EN 61121:2012
Standard. These values may deviate
from the values in the table according
to the laundry type, laundry spin speed,
environmental conditions and voltage
fluctuations.
6.8 Auxiliary functions
Audio Warning
The machine will give an audio
warning when the programme comes
to an end. Use the Audio Warning
Level button to adjust the sound
level.
C
You can change the sound
level either before the
programme starts or
while the programme is in
progress.
Lint filter cleaning
When the programme is completed,
a warning symbol will appear to
remind that the filter needs to be
cleaned.
C
If the Filter Cleaning
symbol in continuously,
refer to “Troubleshooting”
section.
Water tank
When the programme is completed,
a warning symbol will appear to
remind that the water tank needs to
be drained.
If the water tank becomes full while
the programme is running, the
warning symbol will start to flash
and machine will pause. Drain the
water in the water tank and press
Start / Pause button to resume the
programme. The warning symbol
turns off and the programme
resumes operating.
Anti-creasing
A 2-hour anti creasing programme
to prevent laundry from creasing will
be activated if you do not take the
laundry out after the programme has
come to an end. This programme
rotates the laundry in 10-minute
intervals without heat to prevent
creasing.
6.9 Warning symbols
C
22
Warning symbols may differ
according to the model of
your machine.
Cleaning the filter drawer
Warning symbol flashes with certain
intervals to remind that the filter
drawer needs to be cleaned.
End Time Setting
End Time Setting function allows
you to delay the ending time of the
programme up to 24 hours.
1. Open the loading door and put the
laundry in.
2. Select the drying programme,
spin speed and, if required, the
auxiliary functions.
3.Press End Time Setting selection
button to set the desired End
Time Setting symbol lights up
on the display.(When the button
is pressed and hold, End Time
proceeds uninterruptedly).
4.Press Start/Pause button. End
Time Setting starts to count
down. The “:” in the middle of the
displayed End Time Setting will
start to flash.
C
Additional laundry may be
loaded / taken out during
the End Time period. At
the end of the End Time
countdown process, End
Time symbol disappears,
drying process starts and
the programme duration
is displayed. The time on
the display is the total of
normal drying time and End
Time .
Changing the End Time
If you want to change the time during
countdown:
1.Press On/Off/Cancel button
for 3 seconds to cancel the
programme. Restart the machine
and repeat the End Time
procedure for the desired time.
2. When your machine is operated
for the first time, it starts with the
default programme (wardrobe
dryness for cottons).
Cancelling End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
1.Press On/Off/Cancel button
for 3 seconds to cancel the
programme.
2.Press On/Off/Cancel button to
start the programme you have
previously selected.
EN
6.10 Starting the programme
Press Start/Pause button to start the
programme.
Start symbol will light up to
indicate that the programme has
started and “:” symbol in the middle
of the remaining time will keep
flashing.
6.11 Child Lock
Machine is equipped with a Child
Lock which prevents interfering
with the current programme flow
by pressing any button. All buttons
except the On/Off/Cancel button on
the control panel are deactivated
when the Child Lock is active.
In order to activate the Child Lock,
press Audio Warning, Child Lock
button for 3 seconds.
To start a new programme after the
current programme is over or to
interrupt the current programme,
the Child Lock should be deactivated.
Press the same button for 3 seconds
again to deactivate the Child Lock.
C
Lock symbol will appear on
the display when the Child
Lock is activated.
23
C
Child Lock is deactivated
when the machine is
switched off and on with
On/Off/Cancel button.
When the Child Lock is activated:
• Display symbols will not change
even if the position of Programme
Selection knob is changed while
the machine is running or in halt.
• If the Child Lock is deactivated
after changing the position of
the Programme Selection knob
while the machine is running,
the machine stops and new
programme information is
displayed.
3. Press the Start/Pause button to
start the programme.
C
C
6.12 Changing the programme
after it has started
After the machine starts, you can
change the selected programme
and dry your laundry in a different
programme.
1. If you want to select Extra Dry
programme instead of Iron Dry
programme, for instance, press
the Start/Pause button for 1
second to stop the programme.
2. Select Extra Dry programme by
turning the Programme Selection
knob.
3. Press the Start/Pause button to
start the programme.
Adding / removing laundry in
Pause mode
In order to add or take out laundry
after the drying programme has
started:
1.Press Start/Pause button to
switch the machine to Pause
mode. Drying process will stop.
2. While in Pause mode, open the
loading door, add or take out
laundry and close the loading
door.
24
C
Any laundry added after the
drying process has started
may cause the clothes that
are already dried in the
machine intermingle with
wet clothes and the result
will be wet laundry after the
drying process is over.
You may repeat laundry
adding or removing process
as many times as you desire
during drying. However,
this process will increase
the programme time
and energy consumption
since the drying process
will be interrupted
repeatedly. Therefore, it
is recommended to add
laundry before the drying
programme has started.
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then
the current programme
is aborted and new
programme information is
displayed.
CAUTION: Do not touch the
inner surface of the drum
when adding or taking out
laundry while a programme
is running. Surfaces of the
drum are hot.
6.13 Cancelling the programme
If you want to stop drying and cancel
the programme for any reason after
the machine has started to run, press
and hold the On/Off/Cancel button
for 3 seconds.
A
CAUTION: As the inside
of the machine will be
excessively hot when you
cancel the programme
while the machine is
running, activate the
ventilation programme to
cool it down.
6.14 End of programme
Lint Filter Cleaning and Water Tank
warning symbols light up in the
programme follow-up indicator when
the programme comes to an end. The
loading door can be opened and the
machine becomes ready for a second
cycle.
Press On/Off/Cancel button to
switch off the machine.
C
C
C
EN
2-hour Anti-creasing
programme will be
activated if the laundry
is not taken out after the
programme has come to an
end.
Clean the lint filter after
each drying. (See "Lint
Filter and Loading Door
Inner Surface")
Drain the water tank after
each drying cycle. (See
"Draining the water tank")
25
7. Maintenance and
cleaning
Service life of product extends and
frequently experienced problems will
be reduced if it is cleaned at regular
intervals.
7.1 Cleaning Lint Filter / Loading
Door Inner Surface
• A layer can build up on the filter
pores that can cause clogging
of the filter after using the dryer
for a while. Wash the lint filter
with warm water to remove the
layer that builds up on the lint
filter surface. Dry the lint filter
completely before reinstalling it.
Lint and fibre released from the
laundry to the air during the drying
cycle are collected in the Lint Filter.
C
A
C
Such fibre and lint are
generally formed during
wearing and washing.
Always clean the lint filter
and the inner surfaces of
the loading door after each
drying process.
You can clean the lint filter
housing with a vacuum
cleaner.
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it
up and open the lint filter.
• Clean lint, fibre, and cotton
raveling by hand or with a soft
piece of cloth.
• Close the lint filter and place it
back into its housing.
26
• Clean the entire inner surface of
the loading door and loading door
gasket with a soft damp cloth.
7.2 Cleaning the sensor
There are dampness sensors in the
dryer that detect whether the laundry
is dry or not.
To clean the sensors:
• Open the loading doorof the dryer.
• Allow the machine to cool down
if it is still hot due to the drying
process.
• Wipe the metal surfaces of
the sensor with a soft cloth,
dampened with vinegar and dry
them.
C
C
A
EN
Clean metal surfaces of the
sensors 4 times a year.
Do not use metal tools when
cleaning metal surfaces of
the sensors.
Never use solvents,
cleaning agents or similar
substances for cleaning
due to the risk of fire and
explosion!
7.3 Draining the water tank
Dampness of the laundry is removed
and condensed during drying process
and the water that arise accumulates
in the water tank. Drain the water
tank after each drying cycle.
A
A
If you forget to drain the water tank,
the machine will stop during the
subsequent drying cycles when the
water tank is full and the Water Tank
warning symbol will flash. If this is
the case, drain the water tank and
press Start / Pause button to resume
the drying cycle.
To drain the water tank:
• Pull the drawer and remove the
water tank carefully.
• Drain the water in the tank.
• If there is lint accumulation in the
funnel of the water tank, clean it
under running water.
• Place the water tank into its seat.
C
If the direct water draining
is used as an option, there
is no need to empty the
water tank.
Condensed water is not
drinkable!
Never remove the water
tank when the program is
running!
27
7.4 Cleaning the filter drawer
Lint and fiber that could not be
captured by the lint filter are blocked
in the filter drawer behind the
kick plate. Warning light lights up
periodically every 7 drying cycle
maximum for remi,nding purposes
on the products with filter drawer
cleaning warning light « ». A filter
drawer foam placed on plastic is
available inside the filter drawer.
To clean the filter drawer:
• Press the kick plate button to
open the kick plate.
• Open the filter drawer by pressing
the red button.
• Take out the filter drawer sponge.
• Remove the filter drawer cover
by turning it in the direction of
arrow.
• Wash the filter drawer sponge by
hand to remove the fiber and lint
on the surface. After washing the
sponge, squeeze it by hand and
remove the excess water. Welldry the sponge before storing it.
• Pull out the filter drawer.
28
C
It is not necessary to clean
the sponge if lint and fiber
accumulation on it is not
significant.
• Place the sponge back into its
place.
• Close the filter drawer as to lock
the red button.
A
C
Drying without the filter
drawer sponge in place will
damage the machine!
A dirty lint filter and filter
drawer will cause longer
drying periods and higher
energy consumption.
EN
7.5 Cleaning the evaporator
Clean the lint accumulated on the
fins of the evaporator located behind
the filter drawer with a vacuum
cleaner.
• Place the filter drawer back into
its place, turn the filter drawer
cover in the arrow direction and
close it securely.
• Close the kick plate cover.
A
You can also clean by hand
provided that you wear
protective gloves. Do not
attempt to clean with bare
hands. Evaporator fins can
harm your hand.
29
8 Troubleshooting
Drying process takes too much time.
• Pores of the lint filter are clogged. >>> Wash the lint filter with warm
water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the
filter drawer.
• Ventilation grids on the front side of the machine are blocked. >>>
Remove the objects (if any) that block ventilation in front of the
ventilation grids.
• Ventilation may not be sufficient since the room where the machine is
installed is very small. >>> Open the door and windows of the room to
avoid the room temperature increase too much.
• Lime deposit has built up on the dampness sensor. >>> Clean the
dampness sensor.
• Excessive laundry might have been loaded in. >>> Do not overload the
dryer.
• Laundry might not be spun sufficiently. >>> Spin your laundry at a higher
speed in your washing machine
Laundry comes out wet at the end of drying.
C
After drying, the hot clothes feel damper than their actual
dampness level.
• A programme suitable for the laundry type might have not been
used.>>> Check the garment tag and select a programme suitable for
the fabric type or use the timer programmes additionally.
• Pores of the lint filter are clogged. >>> Wash the lint filter with warm
water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the
filter drawer.
• Excessive laundry might have been loaded in. >>> Do not load the dryer
in excess.
• Laundry might not be spun sufficiently. >>> Spin your laundry at a higher
speed in your washing machine
Dryer does not switch on or the programme does not start. Dryer does not
start when it is set.
• It might have not been plugged in. >>> Make sure that the machine is
plugged in.
• The loading door is ajar. >>> Make sure that the loading door is closed
securely.
• Programme is not selected or the Start / Pause button is not pressed.
>>> Make sure that the programme is selected and it is not in the Pause
position.
• “Child Lock” might have been activated. >>> Deactivate the Childproof
Lock.
30
Programme is interrupted without any cause.
• The loading door might not be closed securely. >>> Push the loading
door to close until you hear a locking sound.
• A power failure might have occurred. >>> Press Start / Pause button to
start the programme.
• Water tank may be full. >>> Drain the water tank.
Laundry has shrunk, become felted or deteriorated.
• A programme suitable for the laundry type might have not been used.
>>> Check the garment tag and select a programme suitable for the
fabric type.
Drum lighting does not turn on. (On models with lamp)
• • Dryer is not switched on with the On / Off / Cancel button. >>> Make
sure that the dryer is switched on.
• • Bulb may have blown. >>> Call Authorised Service Agent to have the
lamp replaced.
End/Anti-creasing symbol is on.
• • Anti-creasing programme is activated in order to prevent laundry that
has remained in the machine from creasing. >>> Turn off the dryer and
take out the laundry.
Lint Filter Cleaning symbol is flashing.
• • Filter housing is clogged with lints. >>> Clean the lint filter housing.
• • A deposit has built up on the lint filter pores that may cause clogging.
>>> Wash the lint filter with warm water.
• • Lint filter is not cleaned. >>> Clean the lint filter.
Water leaks from the loading door
• • Lint has accumulated on the inner surfaces of the loading door and on
the surfaces of the loading door gasket. >>> Clean the inner surfaces of
the loading door and the surfaces of the loading door gasket.
Loading door opens spontaneously.
• • The loading door might not be closed securely. >>> Push the loading
door to close until you hear a locking sound.
• Water Tank warning symbol is on/flashing.
• • Water tank may be full. >>> Drain the water tank.
• • Water draining hose might be bent. >>> If the product is connected
directly to a wastewater drain, check the water drain hose.
Filter Drawer Cleaning warning symbol is flashing.
• • Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth
in the filter drawer.
A
EN
If you cannot eliminate the problem although you follow the
instructions in this section, consult your dealer or the Authorised
Service Agent. Never try to repair a nonfunctional product yourself.
31
9. Electrical
Connection
Make sure that you have an earthed power
outlet socket rated at 13 amps (minimum).
9.1 Attention!
When installed, the socket must be
reachable after installation, or a separate
switch (which can disconnect the two poles)
must be used in the installation. Check for
suitability.
For a permanent connection, a master
switch with at least 3mm contact clearance
and minimum 13 A rating must be used.
9.2 Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
Should the mains lead of the appliance
become damaged or need replacing at
any time, it must be replaced by a special
purpose made mains lead which can only
be obtained from an Authorised Service
Agent.
A
Warning
This appliance must be earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must be
used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the
plug must not be used until a replacement
fuse cover has been fitted. Colour of the
replacement fuse cover must be the same
colour as that visible on the pin face of the
plug. Fuse covers are available from any
good electrical store.
32
In order to avoid hazards, damaged
supply cord should be replaced by the
manufacturer, its service agent or similarly
qualified people.
A
A
Do not operate without the top
cover fitted. Risk of injury.
Important
9.3 Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1 Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol or coloured
green and yellow or green.
2 Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or coloured
black.
3 Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or coloured
red.
With the alternative plugs a 13 A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Green and yellow
or green
N
Blue or black
L
Brown or red
9.4 Washer/dryer combination
Do not stack washing machine on top of
the tumble dryer. This would damage both
appliances and guarantees would become
void. It is also unsafe to stack an appliance
on top of another without using a suitable
and approved stacking kit obtained from
specialist retailers.
EN
Guarantee for Refrigeration, Cooking Appliances, Washing Machines, Tumble
Dryers & Dishwashers.
Your new Grundig product is guaranteed against the cost of breakdown repairs for five years
from the date of the original purchase.
What is covered?
•• Repairs necessary as a result of faulty materials, defective components or manufacturing
defect.
•• The cost of functional replacement parts, but excluding consumable items.
•• The labour costs of a Grundig approved repairer to carry out the repair
What is not covered?
•• Transit, delivery or accidental damage or misuse and abuse.
•• Cabinet or appearance parts, including knobs, flaps, handles or container lids.
•• Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery
baskets, filters and light bulbs.
•• Repairs required as a result of unauthorised repair or inexpert installation that fails to meet
the requirements contained in the user instruction book.
•• Repairs to products used on commercial or non-residential household premises.
•• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included
within your household contents insurance policy, or may be available separately from
your retailer).
Important notes.
•• Your Grundig product is designed and built for domestic household use only.
•• The guarantee will be void if the product is installed or used in commercial or nonresidential domestic household premises.
•• The product must be correctly installed, located and operated in accordance with the
instructions contained in the User Instructions Booklet provided.
•• Professional installation by a qualified Electrical Domestic Appliance Installer is
recommended for all Washing Machines, Dishwashers and Electric Cookers
•• Gas Cookers must only be installed by a Gas safe (or BORD GAIS) registered Gas
Installer.
•• The guarantee is given only within the boundaries of the United Kingdom and the
Republic of Ireland.
•• The guarantee is applicable only to new products and is not transferable if the product is
resold.
•• Grundig disclaims any liability for incidental or consequential damages.
•• The guarantee does not in anyway diminish your statutory or legal rights.
•• The product guarantee does not cover damages to plates,glass ware, cutlery, crockery
and also damage to the product itself as a result of using these “Three-in-one”, “Two-inone” detergents.
33
Please keep your purchase receipt or other proof of purchase in a safe place;
you will need to have it should the product require attention under guarantee.
You should also complete the details below; it will help us assist you when requesting service.
(The model number is printed on the Instruction Booklet and the serial number is printed on the
Rating Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
0845 603 1234
Electric Cookers 0845 603 1234
Gas&Dual Fuel Cookers 0845 603 1234
Washing Machines
0845 603 1234
& Dishwashers
Before requesting service please check the trouble-shooting guide in the
Operating Instructions as a charge may be levied where no fault is found even
though your product may still be under guarantee.
Service once the manufacturers guarantee has expired.
If you have purchased an extended guarantee please refer to the instructions contained within
the extended guarantee agreement document. Otherwise please call the appropriate number
above where service can be obtained at a charge.
Should you experience any difficulty in obtaining service please contact the Grundig Customer
Help-Line.
Tel: 0845 603 1234
e-mail: service@Grundig.co.uk
Grundig, 1 Greenhill Crescent, Watford Herts WD18 8QU
www.grundig.co.uk
34
PRODUCT FICHE
Complying Commission Delegated Regulation (EU) No 392/2012
Grundig
Supplier name or trademark
GTN39250GCW
Model name
9
Rated capacity (kg)
Air Vented
Type of Tumble Dryer
-
Condenser
A++
Energy efficiency class (1)
Annual Energy Consumption (kWh) (2)
249
Automatic
Type of Control
Non-automatic
-
Energy consumption of the standard cotton programme at full load (kWh)
2,1
Energy consumption of the standard cotton programme at partial load (kWh)
1,1
Power consumption of the off-mode for the standart cotton programme at full load, PO (W)
0,5
Power consumption of the left-on mode for the standart cotton programme at full load, P L (W)
1,0
The duration of the left on mode (min)
30
Standard cotton programme
(3)
Programme time of the standard cotton programme at full load, T dry (min)
185
Programme time of the standard cotton programme at partial load, Tdry1/2 (min)
108
Weighted programme time of the standard cotton programme at full and partial load (T t)
141
Condensation efficiency class (4)
A
Average condensation efficiency of the standard cotton programme at full load, C dry
90%
Average condensation efficiency of the standard cotton programme at partial load, C dry1/2
90%
Weighted condensation efficiency of the standard cotton programme at full load and partial load, C t
90%
Sound power level for the standard cotton programme at full load (5)
-
Built-in
: Yes
65
- : No
(1) Scale from A+++ (most efficient) to D (least efficient)
(2) Energy consumption based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of
the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.
(3) "Cotton cupboard dry programme" used at full and partial load is the standard drying programme to which the information in the
label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient
programme in terms of energy consumption for cotton
(4) Scale from G (lest efficient) to A (most efficient)
(5) Weighted average value — L WA expressed in dB(A) re 1 pW
www.grundig.com
Document Number
2960311318_EN/060916.1322
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising