Vision Measuring Systems Manual 2D Vision Measuring Systems

Vision Measuring Systems Manual 2D Vision Measuring Systems
Vision Measuring Systems
Manual 2D Vision Measuring Systems Quick Image
Page 619
Manual and CNC Vision Measuring Systems Quick
Scope
Page 621
3D CNC Vision Measuring Systems Quick Vision
Page 625
3D CNC Multisensor Measuring Systems Quick Vision
Page 631
3D CNC Measuring Sysems for Micro Geometries
Page 635
Software for Quick Vision Systems
Page 638
Accessories for Vision Systems
Page 640
618
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Quick Image
Specifications
Series 361
Measuring Mode
High-resolution mode and
Normal mode
90 mm
Optical system
working distance
Optical system
depth of focus
Optical system
magnification
High-resolution mode :
±0,6 mm (QI-A and B)
Normal mode :
±11 mm (QI-A)
±1,8 mm (QI-B)
U1(x,y) = ±(3,5+0,02L) μm
L = measured length (mm)
(1)According to Mitutoyo
inspection method
QI-A models : 0,2X
QI-B models : 0,5X
CCD camera
3 Megapixels colour CCD camera
Illumination
- Contour LED
- Coaxial LED
- 4-quadrant LED ring light
Accuracy (1)
The ultimate in simple operation with one click measurement.
This non-contact 2D vision measuring system brings you a new concept in 2D vision measuring
instruments. It offers several unique features to improve the efficiency of your measurements,
including:
• Long focal depth and wide field of view.
• Double telecentric optical system.
• 3Mega-pixel colour camera.
• Four-quadrant LED ring light.
Optional accessories
No.
937179T.
12AAJ088.
Description
Footswitch
Reinforced footswitch
Image of a stepped
block using the double
telecentric objective
showing the
orthographic view
produced.
Image of the same
object using a standard
objective
Refer to the Quick Image brochure
QI-A2010C
QI-A models
Model
No.
Travelling range X-, Yaxis [mm]
Travelling range Z-axis
[mm]
Stage glass size [mm]
Max. stage loading kg
Mass kg
QI-B models
Model
No.
Travelling range X-, Yaxis [mm]
Travelling range Z-axis
[mm]
Stage glass size [mm]
Max. stage loading kg
Mass kg
QI-B4020B
QI-A1010C
361-840A
QI-A2010C
361-841A
QI-A2017C
361-842A
QI-A3017C
361-843A
QI-A4020C
361-844A
100 x 100
200 x 100
200 x 170
300 x 170
400 x 200
100
100
100
100
100
170 x 170
10
70
242 x 140
10
74
260 x 230
20
140
360 x 230
20
148
440 x 232
15
154
QI-B1010C
361-845A
QI-B2010C
361-846A
QI-B2017C
361-847A
QI-B3017C
361-848A
QI-B4020C
361-849A
100 x 100
200 x 100
200 x 170
300 x 170
400 x 200
100
100
100
100
100
170 x 170
10
70
242 x 140
10
74
260 x 230
20
140
360 x 230
20
148
440 x 232
15
154
Field of view with QI-A 0.2X magnification
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Field of view with QI-B 0.5X magnification
619
Software for Quick Image Systems
Specifications
QIPAK
• One click measurement with QUICK GO/NG decision
• Single mouse-click edge-detection tools; very easy to use.
• Template tools for comparative analysis.
• Video image capture.
• Stage navigation function gives improved measurement cycles.
QIPAK
Additional software
(optional )
MEASURLINK
(refer to the Measurlink page)
QS CAD-IMPORT/EXPORT
FORMTRACEPAK-AP (1)
No.
Type
QIPAK Software for Quick Image Systems
(1) FORMTRACEPAK-AP
Simple and easy-to-use 2D contour analysis.
Graphic reports (geometry or scanning) edition.
Allows measurement by comparison.
For more information refer to FORMTRACEPAK-AP.
Example 1 screen layout QIPAK
Example 2 screen layout QIPAK
620
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Manual Quick Scope QS-L Series
Specifications
Accuracy(1)
Illumination
Series 359
E1(x,y)= (2,5+2L/100) μm
L=measured length (mm)
(1)According to Mitutoyo inspection
method
- Contour
- Coaxial
- Ring Light
Optional accessories
No.
937179T.
12AAJ088.
02ATN695.
Description
Footswitch
Reinforced footswitch
Calibration chart with holder
This manual vision measuring system is an excellent surface observation system which you can use
on a wide variety of workpieces.
The Quick Scope offers you the following benefits:
• 0,1 μm resolution and 150 mm Z-axis range.
• Power zoom enabling you to change magnification change quickly and easily.
• Fine illumination capability enabling you to change lighting to match your workpiece requirements.
• A quick release system on the stage, so you can switch instantly between coarse and fine movement.
• Quick navigation function allowing you to repeat measurements quickly.
• An auto-focus function available for QS-L AFB models.
Refer to the Optical Accessories page for Quick Scope / Quick Vision for
more information on calibration charts.
Quick Scope brochure on request
QS-L 2010 Zoom AF
QS-L 2010 models
- Range : 200 x 100 x 150 mm
Type
No.
Model
QS-L Zoom
359-710-1D
QS-L2010ZB
Colour CMOS
3 Megapixels
Zoom type
QS-L Zoom AF
359-703D
QS-L2010ZAFB
0,75X -> 5,25X
0,5X -> 3,5X
29X -> 202X
26X -> 180X
Manual with software assisted contrast level
10
72
Motorized with AF
10
66
QS-L Zoom
359-711-1D
QS-L3017ZB
Colour CMOS
3 Megapixels
Zoom type
QS-L Zoom AF
359-704D
QS-L3017ZAFB
0,75X -> 5,25X
0,5X -> 3,5X
29X -> 202X
26X -> 180X
Manual with software assisted contrast level
20
140
Motorized with AF
20
134
Sensor type
AF (motorized Z-axis)
Objective lens
Magnification
(optical system)
Magnification on screen
(56 cm / 22" inch monitor)
Z-axis measurement
Max. stage loading kg
Mass kg
QS-L 3017 models
- Range : 300 x 170 x 150 mm
Type
No.
Model
Sensor type
AF (motorized Z-axis)
Objective lens
Magnification
(optical system)
Magnification on screen
(56 cm / 22" inch monitor)
Z-axis measurement
Max. stage loading kg
Mass kg
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
621
Colour CCD
Yes
Zoom type
Colour CCD
Yes
Zoom type
Manual Quick Scope QS-L Series
QS-L 4020 models
- Range : 400 x 200 x 150 mm
Type
No.
Model
Sensor type
AF (motorized Z-axis)
Objective lens
Magnification
(optical system)
Magnification on screen
(56 cm / 22" inch monitor)
Z-axis measurement
Max. stage loading kg
Mass kg
QS-L Zoom
359-712-1D
QS-L4020ZB
Colour CMOS
3 Megapixels
Zoom type
QS-L Zoom AF
359-705D
QS-L4020ZAFB
0,75X -> 5,25X
0,5X -> 3,5X
Colour CCD
Yes
Zoom type
29X -> 202X
26X -> 180X
Manual with software assisted contrast level
15
146
Motorized with AF
15
140
Stage with quick release mechanism
Guided stage
navigation
for repeat
measurements
Step 1:
Not in position
Guided stage
navigation
for repeat
measurements
Step 2:
In position
622
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
CNC Quick Scope QS Series
Specifications
Series 359
Illumination
- Contour
- Coaxial
- Ring Light
Optional accessories
No.
937179T.
12AAJ088.
02ATD415.
02APW610.
02AKN020.
Description
Footswitch
Reinforced footswitch
Joystick XYZ
Control Box 2
Calibration chart
Refer to the Optical Accessories page for Quick Scope / Quick Vision for
more information on calibration charts.
With this CNC vision measuring system you can meet a variety of measurement needs.
The Quick Scope offers you the following benefits:
• You can configure the QS lighting for different measurement needs thanks to the surface,
contour and fibre-optic ring light illumination.
• The powerful, Windows® based QSPAK software is easy to use and offers you a wide spectrum
of measuring and analysis capabilities.
• You can make use of a range of functions including zoom, auto-focus, part program generation,
one-click edge detection, graphic display, 48 different macros and a pattern matching function
for several common part features.
• You can control the stage with your mouse, through the optional joystick box or the
multi-function control box.
Control box 2
Joystick XYZ
QS-250 Zoom CNC
Quick Scope brochure on request
QS-250Z
Type
No.
Range (X, Y, Z-axis) with
Vision Head
QS-250 Zoom
359-508-10Y
200 x 250 x 100 mm
E1(x,y)= (2,5+0,6L/100) μm
L=measured length (mm)
0,1
Colour CCD
Zoom type
Accuracy(1)
Resolution μm
Sensor type
Objective lens
Magnification
(optical system)
Magnification on screen
(56cm / 22" inch monitor)
AF (motorized Z-axis)
Z-axis measurement
Stage glass size [mm]
Max. stage loading kg
Mass kg
0,5X -> 3,5X
26X -> 180X
Yes
Motorized with AF
269 x 311 mm
10
76
(1)According to Mitutoyo
inspection method
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
623
Software for Quick Scope Systems
Specifications
QSPAK
•
•
•
•
Easy to use, single mouse-click edge-detection tools
Template tools for comparative analysis.
Video image capture.
Stage navigation function for CNC machines giving you improved measurement cycles.
QIPAK
Additional software
(optional )
MEASURLINK
(refer to the Measurlink page)
QS CAD-IMPORT/EXPORT
FORMTRACEPAK-AP(1)
No.
Type
QSPAK Software for Quick Scope systems
EASYPAG
(only for QS CNC)
(1) FORMTRACEPAK-AP
Simple and easy-to-use 2D contour analysis.
Graphic reports (geometry or scanning) edition.
Allows measurement by comparison.
For more information refer to FORMTRACEPAK-AP
QSPAK Layout: Easy mode
QSPAK Layout: Pro mode
Measurement item commands
624
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Quick Vision ELF Series
Specifications
Series 363
Range (X, Y, Z-axis)
with Vision Head
Resolution
Accuracy (1)
250 x 200 x 200 mm
0,1 μm
E1(x,y) = (2+0,3L/100) μm
E1(z) = (3+0,5L/100) μm
L = measured length (mm)
(1) According to Mitutoyo
inspection method
- Contour
- Coaxial
- 4-quadrant PRL
Illumination
(White LED)
You will find this CNC Vision Measuring System ideal for installations anywhere that you have limited space, due to its controller-integrated compact design.
The Quick Vision ELF offers you the following benefits:
• On a small footprint, this series offers you full functionallity including programmable ringlight
(PRL) and power turret.
• The pattern focus enables you to make measurements in the Z-axis with the Auto Focus tools on
low contrast, transparent or mirrored surfaces.
• Accuracy specifications conforming to ISO 10360-7 standard (on request)
• Manual temperature compensation as standard feature.
(PRL : see Programmable Ring Light on
this page)
Magnification
change system
Programmable Power Turret
(PPT)
1X ; 2X ; 6X
311 x 269 mm
15 kg
205 kg
Stage glass size
Max. stage loading
Mass
Optional PFF Function (Points From Focus)
• PFF enhances the functionality of standard QV models with 3D topography measurements
• No additional sensor necessary
• High scanning range in Z axis from 2,7 mm upto 40,6 mm depending on the objective lens in use
and in wide range mode
Additional Specifications
Factory option
Additional
objective lenses
- Series 364 (TP)
Touch Probe option
Refer to the Optical Accessories
page for Quick Scope / Quick Vision
Optional accessories
No.
02ATP623.
02ATN695.
Description
Machine stand for QV-ELF
Calibration chart with holder
Touch Probe option
Refer to the Optical Accessories page for Quick Scope / Quick Vision for
more information on calibration charts.
1X tube lens and
2.5X objective
Field of View :
2.5 x 1.88 mm
2X tube lens and
2.5X objective
Field of View :
1.25 x 0.94 mm
Quick Vision ELF 202 (QV-E202P1L)
6X tube lens and 2.5X objective
Field of view: 0.41 x 0.31 mm
Programmable power turret (PPT) - 1X ; 2X ; 6X
The three tube lens selection provides three
magnification levels while using the same objective
lens. Replacement lenses allow a wide range of
magnifications to support a variety of
measurements.
Workpiece to be measured with PFF
3D Analysis of PFF measurement
Type
No.
Model
2D Analysis of PFF measurement
Quick Vision ELF 202 PRO
363-107SY
QV-E202P1L-D
Quick Vision brochure on request
Scan QR Code with your mobile device and watch
our product videos on YouTube
PRL = Programmable Ring Light
Fine control of angle and direction provides illumination for optimal measurement. You can set the angle in the
range from 30° to 80°. This type of illumination is effective for enhancing the edge of inclined surfaces or very
small steps. Illumination can be controlled independently from back or front, right or left. Measurement with edge
enhancement is possible if you form a shadow by illuminating from only one direction.
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
625
Quick Vision APEX / HYPER Series
Specifications
Series 363
This CNC Vision Measuring System is a floor-standing vision measuring machine which offers you
the following benefits:
• Programmable LED stage and coaxial lighting.
• Programmable 4-quadrant LED ring light.
• Pattern focus function.
• Accuracy specifications conforming to ISO 10360-7 standard (on request).
• Temperature compensation as standard feature.
Optional PFF Function (Points From Focus)
• PFF enhances the functionality of standard QV models with 3D topography measurements
• No additional sensor necessary
• High scanning range in Z axis from 2,7 mm up to 40,6 mm depending on the objective lens in
use and in wide range mode
Illumination
Magnification
change system
Sensor Type
Factory option
White LED:
- Contour
- Coaxial
- 4 quadrant PRL
PRL: Refer to QV-ELF page for
details)
Programmable Power Turret (PPT)
1X ; 2X ; 6X
QV PRO Models:
High sensitivity CCD B&W camera
QV PRO3 Models:
High sensitivity CCD Colour camera
For QV APEX and QV HYPER:
- TAF
Tracking Auto Focus
- Series 364 (TP)
Touch Probe option
Refer to the Quick Vision
Accessories page for details
Touch Probe option
Additional
objective lenses
For QV APEX:
- PRO 3 models
Colour CCD camera
Refer to the Optical Accessories
page for Quick Scope / Quick Vision
Optional accessories
No.
Description
Calibration charts
02ATN695. Calibration chart with holder
Machine stands
02ATN332. Machine Stand for QV-302
02ATN333. Machine Stand for QV-404
02ATN334. Machine Stand for QV-606
Refer to the Optical Accessories page for Quick Scope / Quick Vision for
more information on calibration charts.
Quick Vision Apex 302 PRO
Workpiece to be measured with PFF
Refer to the Quick Vision brochure
3D Analysis of PFF measurement
2D Analysis of PFF measurement
Auto Focus Tool : type Pattern Focus
(tool for focusing on difficult surfaces such
as mirrors, polished surface clear glass).
626
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Quick Vision APEX / HYPER Series
Series 363
Quick Vision 302
Range : 300 x 200 x 200 mm
Type
Quick Vision APEX 302 PRO
No.
363-170SY
Model
QV-X302P1L-D
Resolution μm
0,1
E1(x, y) = (1,5+0,3L/100)
E1(z) = (1,5+0,4L/100)
Accuracy(1)
E2(xy) = (2+0,4L/100)
Max. stage loading kg
20
Mass kg
360
Quick Vision brochure on request
Scan QR Code with your mobile device and watch
our product videos on YouTube
(1)
According to Mitutoyo inspection method
According to Mitutoyo inspection method
According to Mitutoyo inspection method
Quick Vision APEX 404 PRO3
363-181Y
QV-X404P3L-D
0,1
E1(x, y) = (1,5+0,3L/100)
E1(z) = (1,5+0,4L/100)
E2(xy) = (2+0,4L/100)
40
579
Quick Vision APEX 606 PRO3
363-191Y
QV-X606P3L-D
0,1
E1(x, y) = (1,5+0,3L/100)
E1(z) = (1,5+0,4L/100)
E2(xy) = (2+0,4L/100)
50
1450
L = measured length (mm)
Quick Vision Apex 606 PRO
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Quick Vision HYPER 404 PRO
363-183SY
QV-H404P1L-D
0,02
E1(x, y) = (0,8+0,2L/100)
E1(z) = (1,5+0,2L/100)
E2(xy) = (1,4+0,3L/100)
30
579
L = measured length (mm)
Quick Vision 606
Range : 600 x 650 x 250 mm
Type
Quick Vision APEX 606 PRO
No.
363-190SY
Model
QV-X606P1L-D
Resolution μm
0,1
E1(x, y) = (1,5+0,3L/100)
E1(z) = (1,5+0,4L/100)
Accuracy(1)
E2(xy) = (2+0,4L/100)
Max. stage loading kg
50
Mass kg
1450
(1)
Quick Vision HYPER 302 PRO
363-173SY
QV-H302P1L-D
0,02
E1(x, y) = (0,8+0,2L/100)
E1(z) = (1,5+0,2L/100)
E2(xy) = (1,4+0,3L/100)
15
360
L = measured length (mm)
Quick Vision 404
Range : 400 x 400 x 250 mm
Type
Quick Vision APEX 404 PRO
No.
363-180SY
Model
QV-X404P1L-D
Resolution μm
0,1
E1(x, y) = (1,5+0,3L/100)
E1(z) = (1,5+0,4L/100)
Accuracy(1)
E2(xy) = (2+0,4L/100)
Max. stage loading kg
40
Mass kg
579
(1)
Quick Vision APEX 302 PRO3
363-171Y
QV-X302P3L-D
0,1
E1(x, y) = (1,5+0,3L/100)
E1(z) = (1,5+0,4L/100)
E2(xy) = (2+0,4L/100)
20
360
627
Quick Vision HYPER 606 PRO
363-193SY
QV-H606P1L-D
0,02
E1(x, y) = (0,8+0,2L/100)
E1(z) = (1,5+0,2L/100)
E2(xy) = (1,4+0,3L/100)
40
1450
Quick Vision STREAM PLUS Series
Specifications
Series 363
This CNC vision measuring system enables you to carry out measurements at lightning speed.
The Quick Vision Stream Plus offers you the following benefits:
• Non-stop measurement in your production environment thanks to high-tech lighting options.
• Combining quadricolour and stroboscopic lighting, it captures and processes all the workpiece
images you need to make accurate and rapid measurements.
Resolution
CCD camera
Accuracy (1)
Illumination
0,1 μm
High-sensitivity B&W, progressive scan
CCD
E1(x,y) = (1,5+0,3L/100) μm
E1(z) = (1,5+0,4L/100) μm
E2(xy) = (2+0,4L/100) μm
L = measured length (mm)
(1) According to Mitutoyo inspection
method
Hi-intensity LED (stroboscopic and
continuous illumination, switchable) :
- Contour (Blue)
- Coaxial (RGB & W)
- 4-quadrant PRL (RGB & W)
(PRL : refer to the QV-ELF page)
Pattern focus function
(Pattern focus : refer to the QV-ACCEL page)
Additional Specifications
Factory option
Additional
objective lenses
- Tracking Auto Focus (TAF)
(Refer to Quick Vision Accessories
for details)
Refer to the Optical Accessories
page for Quick Scope / Quick Vision
Optional accessories
No.
Description
Calibration charts
02ATN695. Calibration chart with holder
Machine stands
02ATN332. Machine Stand for QV-302
02ATN333. Machine Stand for QV-404
02ATN334. Machine Stand for QV-606
Refer to the Optical Accessories page for Quick Scope / Quick Vision for
more information on calibration charts.
Quick Vision STREAM PLUS 606 PRO
STREAM Mode
- The measurement mode of non-stop vision measuring is referred to as the STREAM mode.
Type
No.
Model
Range (X, Y, Z-axis) with
Vision Head
Max. measuring speed
Max. drive speed
(X-, Y-, Z-axis)
Non-stop vision measurement
Quick Vision STREAM PLUS
302
363-172Y
QV-X302P1S-D
Quick Vision STREAM PLUS
404
363-182Y
QV-X404P1S-D
Quick Vision STREAM PLUS
606
363-192Y
QV-X606P1S-D
300 x 200 x 200 mm
400 x 400 x 250 mm
600 x 650 x 250 mm
40 mm/s
40 mm/s
XY : 400 mm/s
Z : 300 mm/s
40 mm/s
XY : 400 mm/s
Z : 300 mm/s
300 mm/s
Refer to the Quick Vision brochure
Other features are identical to QV-APEX
Scan QR Code with your mobile device and watch
our product videos on YouTube
628
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Quick Vision ACCEL Series
Specifications
Series 363
Resolution
High-sensitivity CCD
camera
Contour
illumination
Coaxial
illumination
4-quadrant PRL (1)
illumination
0,1 μm
PRO models : B&W
PRO3 models : Colour
PRO models : White LED
PRO3 models : White LED
PRO models : White LED
PRO3 models : White LED
PRO models : White LED
PRO3 models : White LED
(1) PRL : refer to the QV-ELF page
This CNC vision measuring system is a moving-bridge type structure.
The Quick Vision ACCEL offers you the following benefits:
• The moving-bridge type structure results in a fixed stage. This means that the workpiece fixture
can be designed more simply, which in turn means you need significantly fewer man-hours for
fixture fabrication and inspection.
• The system comes complete with a machine stand.
• 3D topography measurements are possible with the optional PFF functionality.
• Tracking Auto Focus (TAF) and Touch Probe (TP) as factory options.
(2) See image below
Programmable Power Turret
(PPT)
1X ; 2X ; 6X
Pattern Focus (2)
Magnification
change system
Additional Specifications
Additional
objective lenses
Factory option
Refer to the Optical Accessories
page for Quick Scope / Quick Vision
- Touch Probe (TP)
Series 364
- Tracking Auto Focus (TAF)
Refer to Quick Vision accessories
Touch Probe option
Optional accessories
No.
02ATN695.
Description
Calibration chart with holder
Refer to the Optical Accessories page for Quick Scope / Quick Vision for
more information on calibration charts.
Quick Vision ACCEL 1212 PRO3
Auto Focus Tool : type Pattern Focus (focusing for
option difficult surfaces such as mirrors, polished
surface clear glass).
Auto Focus Tool : Edge
Focus type
Model PRO
No.
Model PRO3
No.
Range (X, Y, Z-axis) with
Vision Head
Max. drive speed
X, Y-axis mm/s
Accuracy E1(x,y) (3)
Stage glass size [mm]
Max. stage loading kg
Mass kg
Auto Focus Tool :
Surface Focus type
QV ACCEL 808 PRO QV ACCEL 1010 PRO
363-315Y
363-335Y
QV ACCEL 808 PRO3 QV ACCEL 1010 PRO3
363-316Y
363-336Y
QV ACCEL 1212 PRO
363-355Y
QV ACCEL 1212 PRO3
363-356Y
QV ACCEL 1517 PRO3
363-375Y
QV ACCEL 1517 PRO3
363-376Y
800 x 800 x 150 mm 1000 x 1000 x 150 mm 1250 x 1250 x 100 mm 1500 x 1750 x 100 mm
400
400
300
300
(1,5+0,3L/100) μm
883 x 958
10
2050
(1,5+0,3L/100) μm
1186 x 1186 mm
30
2950
(2,2+0,3L/100) μm
1440 x 1440 mm
30
3600
(2,2+ 0,3L/100) μm
1714 x 1968 mm
30
4500
(3)
According to Mitutoyo inspection method
L = measured length (mm)
For a description of PRO and PRO3 models, refer to QV-APEX
Auto Focus Tool : Multi-point Auto Focus type
Quick Vision brochure on request
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
629
Quick Vision ULTRA
Additional Specifications
Series 363
This CNC vision measuring system gives you ultra-high accuracy.
The Quick Vision ULTRA offers you the following benefits:
• Axial translation straightness is maximised through the use of a precision air-bearing linear
guide system.
• High resolution (0,01 μm) scales, manufactured at an ultra-precision facility located 11 m underground, are used on all axes.
• The scales are made from glass that has a virtually zero thermal expansion coefficient, so your
measuring accuracy has minimal variation in changing temperatures.
• The base structure was designed using Finite Element Method analysis; this gives you the optimal stiffness/weight ratio combined with excellent geometrical stability, in terms of axial
straightness/ perpendicularity, with changing temperatures.
• Accuracy specification conforming to ISO 10360-7 are available (on request).
• 3D topography measurements are possible with the optional PFF functionality.
Factory option
Additional
objective lenses
- Tracking Auto Focus (TAF)
Refer to Quick Vision Accessories
page
Refer to Objective page for Quick
Scope / Quick Vision
By using FEM (Finite Element Method) analysis of
the base design, the placement of stiffening ribs
and beams has been determined for the Ultra Quick
Vision to provide optimal structural rigidity.
Ultra-precision scale manufacturing facility 11
metres underground
Quick Vision ULTRA 404 PRO
Type
No.
Model
Range (X, Y, Z-axis) with
Vision Head
Accuracy (1)
Resolution μm
Magnification change
system
Dimensions (W x D x H) (2)
mm
CCD camera
Quick Vision ULTRA 404 PRO
363-518SY
QV-U404P1N-D
400 x 400 x 200 mm
E1(x,y) = (0,25+0,1L/100) μm
E1(z) = (1,5+0,2L/100) μm
E2(xy) = (0,5+0,2L/100) μm
L = measured length (mm)
0,01
Programmable Power Turret (PPT)
1X ; 2X ; 6X
1172 x 1735 x 1910
High-sensitivity CCD B&W
Max. drive speed
(X-, Y-, Z-axis)
Illumination
Ultra-high accuracy crystallized glass scale with
virtually zero thermal expansion.
The Ultra Quick Vision is equipped with a
crystallized glass scale having a resolution of 0.01
μm and linear expansion coefficient of 0.08 x 10-6/K.
This virtually zero thermal expansion means the
Ultra Quick Vision can minimise accuracy
fluctuation due to thermal changes.
150 mm/s
Quick Vision brochure on request
Halogen
(Cold light via optical fibre)
- Contour
- Coaxial
- 4-quadrant PRL
(PRL : refer to the QV-ELF page)
Max stage loading [kg]
Stage glass size [mm]
Mass (2) kg
40
493 x 551
2150
(1)
According to Mitutoyo
inspection method.
Including machine stand
(2)
630
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Quick Vision HYBRID Type 1 Series
Specifications
Factory option
Series 365 - CNC Vision Measuring System
- Colour CCD camera
QV PRO 3 models
This CNC vision measuring system is a multi-sensor machine.
The Quick Vision HYBRID Type 1 offers you the following benefits:
• It allows you to make vision measurements with a CCD camera, and carry out high-speed scanning, by applying a vision measurement unit in parallel with a non-contact displacement sensor.
• The focusing point method minimises the difference in the measuring face reflectance and gives
you high measurement reproducibility.
• The double pinhole method (less directivity) is employed as the measurement principle.
Curved-form analysis (MSHAPE-QV)
2D / 3D contour lines display
2D / 3D unfiltered profile display
Shadowgraph display
Curved plane analysis
Unfiltered profile analysis, etc.
Data processing (QV Graph)
3D bar chart display
3D surface chart display
2D continuous cross-section graph display
Quick Vision H1 APEX 404 PRO
Quick Vision Hybrid system - Type 1
The scanning laser system for Quick Vision HYBRID adds 3D profiling capability. The laser probe with 0.01 μm
resolution continuously scans the workpiece surface and gathers coordinate data, enabling the evaluation of
surface contours, peak heights, etc. The double pinhole detection method is adopted to prevent measurement
being affected by the colour, reflection factor, etc., of the surface.
Available for Quick Vision APEX ; Quick Vision STREAM PLUS ; Quick Vision HYPER and Quick Vision ACCEL models.
Quick Vision brochure on request
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
631
Quick Vision HYBRID Type 1 Series
Series 365 - CNC Vision Measuring System
Quick Vision ACCEL-based
Accuracy when using vision sensor: Same as standard Quick Vision ACCEL
Accuracy E1(z) when using non-contact displacement sensor: QV ACCEL 808 and 1010 (2,5+0,4L/100) μm
QV ACCEL 1212 and 1517 (3,5+0,5L/100) μm (1)
Quick Vision H1
Quick Vision H1
Quick Vision H1
Quick Vision H1
Type
ACCEL 808
ACCEL 1010
ACCEL 1212
ACCEL 1517
No.
365-315Y
365-335Y
365-355Y
365-375Y
Model
QVH1-A808P1L-C
QVH1-A1010P1L-C
QVH1-A1212P1L-C
QVH1-A1517P1L-C
Range - Vision
800 x 800 x 150 mm 1000 x 1000 x 150 mm 1250 x 1250 x 100 mm 1500 x 1750 x 100 mm
Range - Non-contact
Displacement Sensor
680 x 800 x 150 mm 880 x 1000 x 150 mm 1130 x 1250 x 100 mm 1380 x 1750 x 100 mm
(Type 1)
Quick Vision APEX-based
Accuracy when using vision sensor: Same as standard Quick Vision APEX
Accuracy E1(z) when using non-contact displacement sensor: (1,5+0,4L/100) μm (1)
Type
Quick Vision H1 APEX 302
Quick Vision H1 APEX 404
No.
365-170SY
365-180SY
Model
QVH1-X302P1L-D
QVH1-X404P1L-D
Range - Vision
300 x 200 x 200 mm
400 x 400 x 250 mm
Range - Non-contact
Displacement Sensor
180 x 200 x 200 mm
280 x 400 x 250 mm
(Type 1)
Quick Vision H1 APEX 606
365-190SY
QVH1-X606P1L-D
600 x 650 x 250 mm
Quick Vision HYPER-based
Accuracy when using vision sensor: Same as standard Quick Vision HYPER
Accuracy E1(z) when using non-contact displacement sensor: (1,5+0,2L/100) μm (1)
Type
Quick Vision H1 HYPER 302
Quick Vision H1 HYPER 404
No.
365-173SY
365-183SY
Model
QVH1-H302P1L-D
QVH1-H404P1L-D
Range - Vision
300 x 200 x 200 mm
400 x 400 x 250 mm
Range - Non-contact
Displacement Sensor
180 x 200 x 200 mm
280 x 400 x 250 mm
(Type 1)
Quick Vision H1 HYPER 606
365-193Y
QVH1-H606P1L-D
600 x 650 x 250 mm
QV-Hybrid Type 1 : Laser principle, double pinhole
method
480 x 650 x 250 mm
Quick Vision STREAM PLUS-based
Accuracy when using vision sensor: Same as standard Quick Vision STREAM PLUS
Accuracy E1(z) when using non-contact displacement sensor: (1,5+0,4L/100) μm (1)
Quick Vision H1 STREAM PLUS
Quick Vision H1 STREAM PLUS
Type
302
404
No.
365-172Y
365-182Y
Model
QVH1-X302P1S-D
QVH1-X404P1S-D
Range - Vision
300 x 200 x 200 mm
400 x 400 x 250 mm
Range - Non-contact
Displacement Sensor
180 x 200 x 200 mm
280 x 400 x 250 mm
(Type 1)
480 x 650 x 250 mm
Quick Vision H1
STREAM PLUS 606
365-192Y
QVH1-X606P1S-D
600 x 650 x 250 mm
480 x 650 x 250 mm
Other features similar to those of corresponding QV series
According to Mitutoyo inspection method
L = measured length (mm)
(1)
632
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Quick Vision HYBRID Type 4 Series
Series 365 - CNC Vision Measuring System
• The Quick Vision HYBRID type 4 is a multi-sensor machine that enables the topography of the
surface and the thickness of transparent objects to be measured.
• The measuring range of the scanning sensor is 0-1200 μm.
• Effective even for high inclination angles both of mirrored surfaces and diffuse surfaces. Maximum measurable inclination angle : ±80° (diffuse surface).
• Achieves high resolution and high accuracy height measurement by the wavelength confocal
method using axial chromatic aberration.
• The automatic light intensity control provides reliable measurements even when reflectance of
the measured surface changes during measurement.
Hybrid Type 4 system
The Quick Vision Hybrid Type 4 is a machine which
allows vision measurement with a CCD camera and
high-speed scanning with a non-contact
displacement sensor.
The Hybrid Type 4 CPS sensor is available for Quick
Vision Apex/Hyper and Quick Vision Stream Plus
models.
Quick Vision H4 HYPER 606 PRO
Scanning measurement with automatic movement
of the Z-axis
Form analysis of plastic
molded parts having a
slope.
Shaped display
Solid colour display
Extraction of arbitrary
section
1: QV APEX-based
Accuracy when using vision sensor: Same as standard Quick Vision APEX
Accuracy E1(z) when using non-contact displacement sensor: (1,5+0,4L/100) μm(1)
Type
Quick Vision H4 APEX 302
Quick Vision H4 APEX 404
No.
365-413SY
365-433SY
Model
QVH4A-X302P1L-D
QVH4A-X404P1L-D
Range (X, Y, Z-axis) with
300 x 200 x 200 mm
400 x 400 x 250 mm
Vision Head
Range - Non-contact
Displacement Sensor
176 x 200 x 200 mm
276 x 400 x 250 mm
(Type 4)
2: QV STREAM PLUS-based
Accuracy when using vision sensor: Same as standard Quick Vision STREAM PLUS
Accuracy E1(z) when using non-contact displacement sensor: (1,5+0,4L/100) μm(1)
Quick Vision H4 STREAM
Quick Vision H4 STREAM
Type
PLUS 302
PLUS 404
No.
365-415Y
365-435Y
Model
QVH4A-X302P1S-D
QVH4A-X404P1S-D
Range (X, Y, Z-axis) with
300 x 200 x 200 mm
400 x 400 x 250 mm
Vision Head
Range - Non-contact
Displacement Sensor
176 x 200 x 200 mm
276 x 400 x 250 mm
(Type 4)
3: QV HYPER-based
Accuracy when using vision sensor: Same as standard Quick Vision HYPER
Accuracy E1(z) when using non-contact displacement sensor: (1,5+0,2L/100) μm(1)
Type
Quick Vision H4 HYPER 302
Quick Vision H4 HYPER 404
No.
365-416SY
365-436SY
Model
QVH4A-H302P1L-D
QVH4A-H404P1L-D
Range (X, Y, Z-axis) with
300 x 200 x 200 mm
400 x 400 x 250 mm
Vision Head
Range - Non-contact
Displacement Sensor
176 x 200 x 200 mm
276 x 400 x 250 mm
(Type 4)
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
633
Quick Vision H4 APEX 606
365-453SY
QVH4A-X606P1L-D
600 x 650 x 250 mm
476 x 650 x 250 mm
Quick Vision H4 STREAM
PLUS 606
365-455Y
QVH4A-X606P1S-D
600 x 650 x 250 mm
476 x 650 x 250 mm
Quick Vision H4 HYPER 606
365-456SY
QVH4A-H606P1L-D
600 x 650 x 250 mm
476 x 650 x 250 mm
Quick Vision White Light Interferometer
Optional accessories
Series 363
•
•
•
•
Combined non contact measurements with vision system and White Light Interferometer (WLI)
Easy alignment and positioning with vision sensor
Full QVPAK functionality with Vision system
Enhanced functionality with WLI-system for high resolution topography evaluation such as surface roughness analysis
No.
02ALT630
02ALT670
02ALY400
Description
Lens for QV WLI A-10X magnification
Lens for QV WLI A-25X magnification
Lens for QV WLI A 5x magnification
QV WLI Objective lenses
Magnification 10X: Field of View 0,32 x 0,24 mm
Magnification 25X: Field of View 0,128 x 0,096 mm
Magnification 5X: Field of View 0,64 x 0,48 mm
CCD camera
White light
Beam splitter
Reference
mirror
Quick Vision WLI 404 PRO
Interference
objective lens
Beam splitter
Measurement
target
WLI optical system head
Video image of part
3D Analysis of measured part
2D Analysis of measured part
Specifications when using vision sensor are same as Quick Vision HYPER
Type
Hyper Quick Vision WLI 302
Hyper Quick Vision WLI 404
No.
363-713SY
363-714SY
Model
QVW-H302P1L-D
QVW-H404P1L-D
Range (X, Y, Z-axis) with
300 x 200 x 190 mm
400 x 400 x 240 mm
Vision Head
Range with WLI Head
215 x 200 x 190 mm
315 x 400 x 240 mm
Tube Lens WLI Head
2x
2x
Repeatability WLI Head
2ı” 0,08 μm
2ı” 0,08μm
Z-axis measuring range
170 μm
170 μm
WLI Head
Max. stage loading kg
15
25
Hyper Quick Vision WLI 606
363-715SY
QVW-H606P1L-D
Interference fringes
Z-axis scan
600 x 650 x 220 mm
515 x 650 x 220 mm
2x
2ı” 0,08μm
170 μm
35
Measurement target
Interference fringes and intensity depiction
Scan QR Code with your mobile device and watch our product videos on YouTube
634
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
UMAP Vision System Series
UMAP : Ultra Micro Accurate Probe
The UMAP (Ultra Micro Accurate Probe) is a micro-form measuring system
The UMAP offers you the following benefits:
• Dual functions of high-accuracy contact and non-contact measurement in one machine.
• Contact (micro-stylus UMAP probe) and non-contact (vision probe) measuring probes are
installed.
• You can measure micro-features of parts previously impossible to reach.
• Several diameters of micro-stylus are available from 15 μm to 300 μm.
UMAP Probe Unit
UMAP Probes
(ultrasonic micro stylus probes)
Stylus ultrasonic micro-vibration and its amplitudesensing enable UMAP probe to perform contact
measurement of micro-features of parts.
5 choices of stylus tip diameter are available from
15 μm to 300 μm.
UMAP 101
ø15 μm
L = 0.2 mm
UMAP 103
ø30 μm
L = 2 mm
UMAP 110
ø100 μm
L = 10 mm
UMAP 107
ø70 μm
L = 5 mm
UMAP 130
ø300 μm
L = 16 mm
Hyper UMAP 302 Type 2
Type 2 - QVPAK + CCD + UMAP Probe
Type
Hyper UMAP 302 Type 2
No.
364-713SY
Model
UVS2-H302P1L-D
185 x 200 mm
Range (X-, Y-axis) (1)
- UMAP 101/103 : 175 mm
- UMAP 107/110 : 180 mm
Range (Z-axis) (1)
- UMAP 130 : 185 mm
E1(x,y) = (0,8+0,2L/100) μm
(2)
Accuracy
E1(Z) = (1,5+0,2L/100) μm
- UMAP 101/103/107 : 0,1 μm
Repeatability (ı)
- UMAP 110/130 : 0,15 μm
Refer to the UMAP Vision system brochure
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
635
Ultra UMAP 404 Type 2
364-717SY
UVS2-U404P1N-D
285 x 400 mm
- UMAP 101/103 : 175 mm
- UMAP 107/110 : 180 mm
- UMAP 130 : 185 mm
E1(x,y) = (0,25+0,1L/100) μm
E1(Z) = (1,5+0,2L/100) μm
- UMAP 101/103/107 : 0,08 μm
- UMAP 110/130 : 0,12 μm
M-NanoCoord
This newly developed 3D CNC ultra-high resolution measuring system is capable of the most precise movements, giving you unsurpassed form measurement accuracy in the nanometre region.
The M-NanoCoord offers you the following benefits:
• Laser Holoscales with one nanometre resolution and virtually zero thermal expansion give you
extreme measuring accuracy of (0,2+0,1L/100) μm.
• The fixed bridge, moving table construction and high-precision air bearings further improve the
accuracy of your measurements.
• Particularly suitable for workpieces with very small dimensions, such as MEMS parts, integrated
circuits, precision formed components, aspheric lenses.
• Every model of the M-NanoCoord Series has a newly developed ultra-high accuracy main unit
with a vision probe as a standard accessory.
• Can be equipped with micro probe systems as a factory option.
Specifications
Main unit
Structure
XY-plane guiding structure
Guiding method
Hydrostatic air bearing
Scales
Low-expansion laser holoscale
Vision Head
- Programmable Power Turret (PPT)
- 4-quadrant LED (PRL)
- High-sensitivity megapixel CCD camera
Factory
options
- UMAP Probes
Touch signal probe with a micro stylus
(Refer the UMAP page for details)
UMAP 101
ø15μm ; L=0,2 mm
UMAP 103
ø30 μm ; L=2 mm
UMAP 107
ø70 μm ; L=5 mm
UMAP 110
ø100 μm ; L=10 mm
UMAP 130
ø300 μm ; L=16 mm
- LNP "Long-range Nano Probe"
Minute Form Probe
M-NanoCoord
Resolution
Range (X, Y, Z-axis) with Vision Head
Accuracy (1)
[μm]
E1(x,y) = (0,2+0,1L/100) μm
M-NanoCoord
1
200 x 200 x 100 mm
No.
(1) According
to Mitutoyo inspection method
L = measuring length (mm)
LNP Probe : Long range Nano Probe
Example of an M-NanoCoord-LNP measurement application
Aspherical lens measurement result
LNP allows measurement of minute features on
workpieces such as light guide plates, using a
diamond stylus with tip radius of 2 μm (optional).
LNP allows scanning measurement with steeplyinclined surfaces of ±80° and touch-probe
measurement of ±90° by vibration-type contact
scanning probe with ultra-low measuring force
(min. measuring force : 10 μN).
Aspherical lens analysis by lens section comparison
636
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Software for Quick Vision Systems
QVPAK
• QVPAK controls multiple sensors: CCD, Touch Probe, continuous scanning devices, special UMAP
or LNP probes.
• Powerful mathematical algorithms are provided that help you to detect difficult edges via noise
filters (similar to morphological filters) and advanced detection tools that take into account the
texture of the target surface.
• Partprogramming and editing is made easy with the user friendly Easy Editor.
• 3D graphic display or measuring planes display with the QVClient QVGraphic.
• QVPAK also offers you various QVClients (standard), real assistants for users (programmation
mode) or operators (production mode) such as QVSmartEditor and QVNavigator.
FORMTRACEPAK-AP
-Simple and easy-to-use 2D contour analysis
-Graphic reports (geometry or scanning) edition
-Allows measurement by comparison
-For more information refer to FORMTRACEPAK-AP
QV3DCAD-Online
Automatic program generation from 3D CAD files•
issued from a CAD system (must be associated
with a converter).
Optional software modules for Quick Vision System
• Formtracepak-AP-QV for 2D contour analysis
• Formtracepak-Pro for 3D surface analysis
• QV Part Manager for managing the execution of parts programs of multiple parts
• Easypag-Pro for offline generation of part programs from 2D CAD data
• QV3DCAD-online for online generation of part programs from 3D CAD files
• MeasurLink for statistical process control (SPC)
• QV3DPAK for 3D topography measurements (see explanation below)
• For more information refer to the Vision Measuring Machines brochures
Optional PFF Function (Points From Focus)
• PFF enhances the functionality of standard QV models with 3D topography measurements
• No additional sensor necessary
• High scanning range in Z axis from 2,7 mm upto 40,6 mm depending on the objective lens in use
and in wide range mode
• PFF is a retro fittable option for Quick Vision ELF, Quick Vision APEX/HYPER, Quick Vision ACCEL
and Quick Vision ULTRA.
Please contact your local Mitutoyo office for more detailed information.
Vision Measuring Machines brochures on request
Workpiece to be measured with PFF
3D Analysis of PFF measurement
Example of the QVPAK screen layout.
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
637
2D Analysis of PFF measurement
Accessories for Quick Vision Systems
Touch Probe Option - Series 364
An optional touch probe (TP) is available for following QV models:
Quick Vision-ELF ; Quick Vision-APEX ; Quick Vision-HYPER ; Quick Vision-ACCEL.
• The Quick Vision-TP system allows you to carry out both non-contact and contact measurements.
• Compatible with Renishaw Touch Probe TP 20 or TP 200.
• An optional MCR20 rack for storing probe modules enhances functionality even more.
Quick Vision-ELF models
Quick Vision-ELF with Touch Probe and MCR20-3 change rack
QV-APEX and HYPER models
Quick Vision-ELF with Touch Probe option
Quick Vision Accel models
Refer to the Quick Vision brochure
Quick Vision-APEX with Touch Probe option
TP20
Compact stylus change type.
TP200
Compact and high accuracy stylus change type
Styli kit M2
Starter
638
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Accessories for Quick Vision Systems
Tracking Auto Focus
Tracking Auto Focus Function TTL (Through The Lens) *
For Quick Vision-APEX, Quick Vision-HYPER, Quick Vision-STREAM PLUS, Quick Vision-ULTRA
The Tracking Auto Focus unit (TAF) allows stable, high-speed measurement in the Z-axis, due to
the Knife-edge method adopted in the detection system.
The TAF function tracks the waviness and warp of the workpiece surface in Z direction and enhances throughput compared with normal measuring mode.
When TAF is used on a Quick Vision Stream Plus model, fully non-stop measurements become possible.
Laser spot of Tracking Auto Focus system (TAF)
Coaxial laser Tracking Auto Focus (TAF)
Measurement example : Height of leads on a QFP package
TAF (Tracking Auto Focus)*
No.
TAF-HR2,5X
TAF-SL2,5X
TAF-5X
TAF-HR1X
TAF-SL1X
Objective lens
QV-HR2,5X
QV-SL2,5X
QV-5X
QV-HR1X
QV-SL1X
Tracking range Laser spot diameter
[mm]
[μm]
±0,5
2,1
±0,5
3,1
±0,125
1,5
±3,15
5,2
±3,15
8
*factory option
Specifications
QV Index Head
QV Index Head
Automatic multi-plane
measurement is possible with
the optional index table
Min. rotation angle
Max. rotation speed
Positioning Accuracy
Max. workpiece ø
[mm]
0,1 °
10 rpm
±0,5°
140
Using the QV Index to rotate the workpiece makes it possible to automatically measure multiple
surface without having to dismount/remount the workpiece.
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
639
Objective Lenses and Calibration Charts
Additional Specifications
Objective Lenses and Calibration Charts
Remarks
No.
Model
02ALT630 QV WLI A-10X
02ALT670 QV WLI A-25X
02ALY400 QV WLI A-5X
1. QV-Objective lens - HR and SL (Long Working Distance) models
No.
02AKT199
02ALA150
Magnification
0,5X
1X
Model
QV-SL0,5X
QV-SL1X
02ALA170
2,5X
QV-SL2,5X
02ALA420
5X
QV-5X
02ALG010
10X
QV-SL10X
02ALG020
25X
QV-25X
02AKT250
02AKT300
02AKT650
1X
2,5X
10X
Turret lens Mag. QV Monitor Mag. QV
QV-HR1X
QV-HR2,5X
QV-HR10X
1X
2X
6X
16X
32X
96X
1X
2X
6X
32X
64X
192X
1X
2X
6X
80X
160X
480X
1X
2X
6X
160X
320X
960X
1X
2X
6X
320X
640X
1920X
1X
2X
6X
800X
1600X
4800X
1X
2X
6X
32X
64X
192X
1X
2X
6X
80X
160X
480X
1X
2X
6X
320X
640X
1920X
Working distance
[mm]
• The monitor magnifications are
approximate values.
• QV-10X, QV-25X : Depending on the
workpiece the illumination may be
insufficient at a turret lens
magnification of 2X and 6X for QV
models.
• QV-25X : The PRL illumination is
restricted in its usable position.
30,5
52,5
60
33,5
30,5
13
40,6
Calibration Glass chart & Compensation glass chart
with holder
A calibration or compensation chart is used to
calibrate or compensate for the pixel size of the CCD
sensor, autofocus accuracy and the optical axis
offset at each magnification of the Programmable
Power Turret (PPT) or of the zoom.
40,6
20
2. Other accessories
No.
Model
02ATN695 Calibration chart with holder
02ATN697 Compensation chart with holder
640
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Modular Clamping System OPTI-FIX
The modular clamping system for vision measuring systems
Holding a cylindrical part between clamping tips.
This modular and flexible clamping system is ideal for use with vision measuring systems including
profile projectors, measuring microscopes and image analysis measuring machines.
OPTI-FIX offers you the following benefits:
• The system’s highly compact components enable you to keep parts in the required position during measurement.
• It enables you to make reliable repeated measurements on a batch of parts, or measurements in
particular positions.
• The system elements are assembled with dovetail joints.
• You are offered a choice of several kits.
No.
Model
K551056
Opti-Set Start
K551057
Opti-Set Basic
K551059
Opti-Set Advanced
K551060 Opti-Set Professional
K551058
Opti-Set Rotation
K550298
Opti-Set Round
K550989
Adjustable
magnetic clamp
Description
- Comprising 16 elements
- Construction of a right-angled frame of dimensions 250x100mm
- Comprising 26 elements
- Construction of a frame of dimensions 200x100mm
- Comprising 51 elements
- Construction of a frame of dimensions 400x250mm
- Allows aerial positioning of parts
- Comprising 115 elements
- Construction of frame of dimensions 400x250mm
- Complete and highly versatile kit
- Comprising 23 elements
- Construction of frame of dimensions 250x200mm
- Including accessories for holding cylindrical parts
- Comprising 18 elements allowing aerial positioning of complex parts
- This kit is supplied in a case (see photo below)
Only 3 clamps are necessary to hold the OPTI-FIX clamping system to the machine surface
Toothed rule that lets light pass
Spring flange locking the part in the measurement
position.
Batch measurement of identical parts placed against
the right-angled frame.
Opti-Set Round
Refer to the OPTI-FIX brochure
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
641
Modular Clamping System OPTI-FIX
OPTI-FIX Clamping System
Mini-vice (internal-external)
Precision quick chuck
Electronic board raised to give clearance for the components on its underside. Placed directly on the glass stage of
the machine without the OPTI-FIX clamping system, the electronic board would not lie flat. The set-up is held on
the glass surface by 2 suction
Clamping jaw
Jaw tip ø0-2
Jaw tip ø1-3
Jaw tip ø4-5
Perpendicular jaw tip
OPTI-FIX brochure on request
Example of application for holding prismatic parts (without the OPTI-FIX clamping system, the part could not be
positioned correctly). The set-up is held on the glass surface by a magnetic clamp attached to the stage frame.
642
All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all
technical specifications, are only binding when explicitly agreed upon. For suggested retail prices, please refer to the separate price list.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising