Scorpion Sting CT Full Specification

Scorpion Sting CT Full Specification
Scorpion Sting CT Full Specification
Scorpion proprietary designed deep V hull incorporating full length longitudinal stringers and underdeck fuel tank. Vinyl ester gel and resin throughout; for improved resistance
to osmosis, UV and heat distortion.
Scorpion deck and top mouldings with vinyl ester gel and resin throughout. Deck stiffening by means of class leading structural polymer foam.
Hull and deck manufacture by class leading resin infusion process, ensuring exacting resin/glass fibre ratios whilst eliminating the risks of dry laminate associated with traditional
hand manufactured boats.
Tubes manufactured by Scorpion in Pennel Orca pentalaminate material, for industry leading abrasion, chemical and UV resistance. Tubes in single colour as standard, with
seven independant chambers, grey teardrop rubbing strake, six grab handles and sculpted bow fairlead.
Principal Dimensions
Twin Inboard Diesel Engines Options
General Data
Twin Yanmar 6LP 315hp Inboard Diesel on Mercury Bravo 1
Year of construction: 2013
10.10 m
Beam Overall
3.10 m
Beam Deflated
2.60 m
0.50 m
Dryweight with Yanmars
Diamante Meteor with black piping
Maximum payload
Engine hours : 160
Standard Layout
Forward Deck
Moulded forepeak with teardrop rubbing strake.
Moulded anchor chain locker with lockable stainless steel catch
Stainless steel bow roller.
Stainless steel handrails.
2 x stainless steel cleats.
Non slip moulded deck surface.
Lockable access hatch to cabin.
Rear Deck
Bathing platform with conceiled stainless steel boarding ladder.
Stainless steel grab handle.
Stainless steel cleats x 2.
Flexiteek® decking to bathing platform and engine hatch.
Electric engine hatch with lift control to console.
Cockpit and Cabin Top
Scorpion Cabin Top moulding with Custom moulded wrap around glass screen.
2 no electric windscreen wipers
Recessed led lights to head lining
Screen demisters fed from Eberspacher
Radar top mount with Garmin GMR radome.
Fully upholstered rear bench seat.
Large storage locker with lockable stainless steel catch.
Flexiteek® decking to cockpit sole.
Double electrically adjusted bolster seating for helm and navigation positions.
Stainless steel grab handles x 2.
Moulded console with helm to starboard.
Cold water deck shower.
Two scuppers to rear seat face, with drain plugs.
Access hatch to cabin with moulded GRP door.
Scorpion RIBs Ltd, Ricardo Way, Ampress Park, Lymington, Hampshire, SO41 8JU
Carbon fibre laminated instrument panel.
Fully moulded console with starboard helm position.
Isotta steering wheel with suede leather covering.
Twin Morse engine controls with seperate gear and throttle.
Icom 323 VHF, surface mounted unit and handset.
Yanmar engine instrumentation with multiple readout.
Garmin 7012 MFD GPS chart plotter with depth sounder and Garmin GMR radome.
Empirbus systems control panel.
Offshore surface mounted compass.
Trim tab control switch panel.
Fully upholstered moulded twin berths.
Table on aluminium support post. Adjustable to form central berth infill.
Upholstered side and head liners to saloon and galley area.
Fusion i700 stereo with 5 channel amplifier and two speakers to cabin (two additional
speakers to cockpit).
Seperately switched recessed lighting to roof liner.
Lockable access hatch to forward deck.
Custom fitted glass port lights to saloon.
Flexiteek® decking to cabin sole and entrance step.
Food preparation area with Corian black granite worktop.
Moulded cool box with powered refrigeration.
Stainless steel sink with cold water supply and shower head.
Locker below sink.
Fully sealed heads unit with teak duckboard insert.
Electrically pumped sea toilet, with ceramic bowl.
Moulded vanity unit with laminate surface and storage locker.
Access panel to console installation.
Eberspacher diesel cabin heater with 2 outlets.
Engineering and Systems
Empirbus contol system
28 inch stainless steel propellors.
Fuel filter with clear inspection bowl.
Underdeck fuel tanks 2 x 450 litres.
110 amp hour deep cycling batteries x 2.
Lenco Race trim tabs.
WEMA fuel guage and sender.
Electric anchor system with stainless steel bow roller, chain and warp.
Pressurised cold/hot water system with 100 litre flexible potable water tank.
240v shore power with outlet to cabin and battery charger.
Fire extinguishers to cabin and engine bay.
LOPO LED navigation lights.
Boat manual with RCD certification.
CE plate.
£245,000 (vat paid)
Scorpion RIBs Ltd, Ricardo Way, Ampress Park, Lymington, Hampshire, SO41 8JU
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF