Warranty Booklet_INT2010_ENG_SAB_3.2.indd

Warranty Booklet_INT2010_ENG_SAB_3.2.indd
INSTRUCTION MANUAL
Guess Watches
WOMEN’S
Congratulations on owning your new GUESS Watch. Developed from
advanced electronics technology, the movement is manufactured from the
best quality components and powered by a long life battery.
HIGH PERFORMANCE FEATURES
30 METERS (3 ATM) TO 100 METERS (10 ATM)
For style with 10 ATM, suitable for swimming, sailing, sail boarding,
surfing and shallow diving.
WATER RESISTANT GENUINE LEATHER BANDS
Specially developed water resistant leathers and construction
are used in all GUESS straps.
HIGH QUALITY STAINLESS STEEL CASE & BRACELET
3
WOMEN’S
OPERATING
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
Simple
Time/Mini Sweep/Dual Time
INSTRUCTIONS
SIMPLE TIME / MINI SWEEP / DUAL TIME
SIMPLE TIME / MINI
A B SWEEP / DUAL TIME
A
B
A B
A B
crown position
A B
B
time:
To To
setset
thethe
time:
1.the
PULL
out crown
B position.
PULL
out
crown
to B to
position.
To1.set
time:
2.
TURN
crown
either
way
to correct
TURN
crown
either
to correct
time.time.
1. 2.PULL
out
crown
to B way
position.
3. Push in either
crown to Atoposition.
2. 3.TURN
correct time.
Push crown
in crown to Away
position.
3. Push in crown to A position.
A B
CALENDAR
/ DATE
Calendar/Date
CALENDAR / DATE
To set the time:
To set the time:
A B C
1.the
PULL
out Crown to C position.
To1.set
time:
PULL
out
Crown to C position.
2. TURN
crown
way to correct time.
1. 2.PULL
out
Crown
to either
Cway
position.
TURN
crown
either
to correct time.
3.
PUSH
in
crown
to
A
2. TURN crown either way toposition.
correct time.
3. PUSH in crown to A position.
3. PUSH in crown to A position.
To set the calendar / date:
crown position
To 1.
set PULL
the calendar
/ to
date:
out crown
B position.
To set the
calendar
/ date:
1. PULL
out crown
tocounter
B position.
2. TURN
crown
clockwise or towards you to correct date.
1. PULL
out crown
to B
position.
2. TURN
crown
counter
clockwise
or towards you to correct date.
3.
PUSH
in
crown
to
A
position.
2. TURN crown counter clockwise or towards you to correct date.
NOTE:
The
date
changes
PUSH
crown
position.automatically every 24 hours.
3. 3.PUSH
inincrown
totoAA
position.
NOTE:
changes
automatically
every24
24hours.
hours.
NOTE:
The The
datedate
changes
automatically
every
2
2
4
WOMEN’S
DAY
/ DATE / 24
HOUR
Day/Date/24
Hour
DATE
date
day
DAY
A
A B
B C
C
A B
B C
C
A
A B
B C
C
A
24-HOUR
24
hour
crown position
crown
position
DATE
date
day
DAY
date
DATE
day
DAY
date
DATE
A B C
DATE
date
11 22 33
A B C
day
DAY
crown
crown
position
date
DATE
position
date
DATE
DAY
day
24-HOUR
24 hour
24-HOUR
24
hour
month setting
24-HOUR
24
hour
2424-HOUR
hour
MONTH SETTING
button
BUTTON
A
A B
B C
C
day
DAY
A
A B
B C
C
A B C
DAY
day
MONTH
month
24-HOUR
24 hour
crown
crown
position position
crown position
crown
position
DATE
date
SECOND
second
24
hour
24-HOUR
DATE
date
Totime:
set time:
To set
To set day:
1.
PULL
out
crown
to
C
position.
1. PULL out crown to C position.
1. PULL out crown to C position.
2. TURN crown either way to correct time.
2. TURN crown either way to correct time.
2. Advance time 24 hours to change the day.
3. PUSH in crown to A position.
3. PUSH in crown to A position.
3. PUSH in crown to A position.
NOTE: 24 hour indicator can change only
when setting the time.
Todate:
set date:
To set
NOTE the date changes automatically every 24 hours.
NOTE the date changes automatically
1. PULL out crown to B position.
To set month:
every2.24 TURN
hours.crown clockwise to correct date.
Push month setting button until the small
1. PULL
out crown
to B position.
3. PUSH
in crown
to A position.
2. TURN crown clockwise to correct date.
3. PUSH in crown to A position.
hand of month is set to the correct month.
3
5
WOMEN’S
month.
6,9,12
Three-eye
withDate
Date
6, 9, 12
Three-eyeChronograph
Chronograph with
1/10 seconds
PUSHER A
crown
position
A B
C
PUSHER B
minute
seconds
Crown position “A” , “B” & “C”.
Crown position
A ,“A”
B &(top)
C. & “B” (bottom).
CALENDAR
Pushers
Pushers A12
(top)
and eye
B (bottom).
To set the calendar:
o’clock
“1/10 seconds elapsed”.
o’clock
“minutes
elapsed”.
12 o’clock9 eye
1/10eye
seconds
elapsed.
1. PULL out crown to B position.
6
o’clock
eye
“seconds
elapsed”.
9 o’clock eye minutes elapsed.
2. TURN crown clockwise to correct date.
6 o’clock eye seconds elapsed.
3. PUSH in crown to A position.
This chronograph watch has 3 functions:
NOTE: The date changes automatically every
4
24 hours.
TIME, CALENDAR, STOPWATCH.
STOPWATCH
TIME
To set the time:
1. PULL crown to C position.
2. TURN crown either way to correct time.
3. PUSH crown into A position.
The stopwatch is capable of measuring:
1/10 seconds elapsed up to one second (top eye).
Minutes elapsed up to one hour (middle eye).
Seconds elapsed up to one minute (bottom eye)
* BEFORE USING THE STOP WATCH, reset the
stopwatch hands to the 60 and 0 positions.
6
WOMEN’S
6, 9, 12 Three-eye Chronograph with Date (continued)
To reset stopwatch hands:
1. PULL crown to position C.
2. PRESS pusher A intermittently until the top eye hand is reset to 0.
3. PRESS pusher B intermittently until the middle and top eye hands is reset to 60.
NOTE: PRESSING and HOLDING either pusher A or B will cause the hands to continue
to move until the pusher is released.
If the stopwatch hands move improperly:
1. PULL out the crown to B position.
2. PRESS pushers A and B simultaneously for three seconds.
3. RELEASE pushers, stopwatch hands will move 180 degrees.
4. PUSH crown in to A position.
Standard stopwatch measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset.
Timing 2 competitors:
Split time:
1. PRESS pusher A to start timing.
2. PRESS pusher B to stop timing.
3. PRESS pusher A to stop timing of second event.
4. PRESS pusher B to view time of second event.
5. PRESS pusher B to reset.
1. PRESS pusher A to start timing.
2. PRESS pusher B to split.
3. PRESS pusher B to begin again.
4. PRESS pusher A to stop.
5. PRESS pusher B to reset.
7
WOMEN’S
6, 12 Two-Eye
Chronograph With
DateDATE
6,12 TWO-EYE
CHRONOGRAPH
WITH
chronograph minute
handHAND
CHRONOGRAPH
MINUTE
PUSHER A
crown
position
A B
C
PUSHER B
chronograph
second hand
CHRONOGRAPH
SECOND HAND
second
SECOND
Crown
position
“B” & “C”.
Crown
position
A, B“A”
and, C.
Pushers
“A”and
(top)
& “B” (bottom).
Pushers
A (top)
B (bottom).
12 o’clock eye “1 minute up to maxinum 60 minute”.
12 o’clock eye 1 minute up to maxinum 60 minute.
6 o’clock eye “second”.
6 o’clock eye second.
This chronograph watch has 3 functions:
This chronograph watch has 3 functions:
TIME, CALENDAR, STOPWATCH.
TIME, CALENDAR, STOPWATCH.
TIME
TIME
To set the time:
To set the time:
1. PULL crown to “C” position.
1. PULL crown to C position.
2. TURN crown either way to correct time.
2. TURN
crown
eitherinway
to position,
correct time.
3. PUSH
crown
to “A”
small second hand begins to run.
3. PUSH crown in to A position, small second hand begins to run.
7
8
WOMEN’S
6, 12 Two-Eye Chronograph With Date (continued)
CALENDAR
To set the calendar:
1. PULL out crown to B position.
2. TURN crown clockwise to correct date.
3. PUSH in crown to A position.
NOTE: The date changes automatically every 24 hours.
STOPWATCH
The stopwatch is capable of measuring:
1/1 second elapsed up to maxinum of 60 minute (top eye).
BEFORE USING THE STOP WATCH, reset the stopwatch hands to the 60 and 0 positions.
To reset stopwatch hands:
1. PULL crown to position C.
2. PRESS pusher A intermittently until the chronograph second hand is reset to 0.
Standard stopwatch measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset.
Accumulated elapsed time measurement:
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS pusher A to restart timing.
4. PRESS Pusher A to stop 2nd timing.
5. PRESS Pusher B to reset.
9
WOMEN’S
Ana-Digit
ANA-DIGIT
EL
EL
S2
S2
S1
S1
FEATURES
Hour, Minute, Second
FEATURES
Month,
Date
Hour,
Minute,
Second
Back
Light
Month, Date (EL)
Back Light (EL)
NORMAL TIME MODE
1. PRESS
S1 once
to view Month & Date
NORMAL
TIME
MODE
PRESS
S1 twice
to view
Second
1. 2.
PRESS
S1 once
to view
Month
& Date
3. PRESS S2 once, ""Time"" & ""Date"" mode will be displayed alternatively
2. PRESS S1 twice to view Second
PRESS S1 twice, back to Time mode"
3. PRESS S2 once, Time & Date mode will be displayed alternatively
4. PRESS EL to light-up display
PRESS S1 twice, back to Time mode
4. PRESS EL to light-up display
SETTING SEQUENCE
1. PRESS S2 twice to set "Month"; Press S1 to advance
SETTING
SEQUENCE
2. PRESS
S2 once to set "Date"; Press S1 to advance
1. 3.
PRESS
S2
twice
to set
Month;
Press
S1 S1
to advance
PRESS S2 once
to set
"Hour";
Press
to advance
2. 4.
PRESS
S2 once
to set
Press S1
to advance
PRESS
S2 once
to Date;
set "Minute";
Press
S1 to advance
3. 5.
PRESS
S2 once
to set
Hour;
PressisS1
to advance
PRESS
S2 once
when
setting
complete.
Normal time will be displayed
(Press
S1
if
time
mode
does
not
flash).
4. PRESS S2 once to set Minute; Press S1 to advance
5. PRESS S2 once when setting is complete. Normal time will be displayed
(Press S1 if time mode does not flash).
9
10
WOMEN’S
MEN’S
Congratulations on owning your new GUESS Watch. Developed from
advanced electronics technology, the movement is manufactured from the
best quality components and powered by a long life battery.
HIGH PERFORMANCE FEATURES
30 METERS (3 ATM) TO 100 METERS (10 ATM)
For style with 10 ATM, suitable for swimming, sailing, sail boarding,
surfing and shallow diving.
WATER RESISTANT GENUINE LEATHER BANDS
Specially developed water resistant leathers and construction
are used in all GUESS straps.
HIGH QUALITY STAINLESS STEEL CASE & BRACELET
MINERAL CRYSTALS
All GUESS watches are manufactured with mineral crystals for increased water
and scratch resistance, as well as greater durability.
12
MEN’S
OPERATING
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
Simple
Time/Mini Sweep/Dual Time
INSTRUCTIONS
SIMPLE TIME / MINI SWEEP / DUAL TIME
SIMPLE TIME / MINI SWEEP / DUAL TIME
A B
A B
crown position
A B
time:
To To
setset
thethe
time:
1.the
PULL
out crown
B position.
PULL
out
crown
to B to
position.
To1.set
time:
2. TURN
crown
either
way
to correct
TURN
crown
either
way
to correct
time.time.
1. 2.PULL
out
crown
to B
position.
3.
Push
in
crown
to
A
position.
2. 3.TURN
either
to correct time.
Push crown
in crown
to Away
position.
3. Push in crown to A position.
A B
CALENDAR
/ DATE
Calendar/Date
CALENDAR / DATE
To set the time:
To set the time:
1.the
PULL
out Crown to C position.
To1.set
time:
PULL
out
Crown to C position.
2. TURN
crown
way to correct time.
1. 2.PULL
out
Crown
to either
Cway
position.
TURN
crown
either
to correct time.
3.
PUSH
in
crown
to
A
2. TURN crown either way toposition.
correct time.
3. PUSH in crown to A position.
3. PUSH in crown to A position.
To set the calendar / date:
To 1.
set PULL
the calendar
/ to
date:
out crown
B position.
To set the
calendar
/ date:
1. PULL
out crown
tocounter
B position.
2.
TURN
crown
clockwise or towards you to correct date.
1. PULL out crown to B position.
2. TURN
crown
counter
clockwise
or towards you to correct date.
3. PUSH
crown to
A position.
2. TURN
crownincounter
clockwise
or towards you to correct date.
NOTE:
The
date
changes
PUSH
crown
position.automatically every 24 hours.
3. 3.PUSH
inincrown
totoAA
position.
crown position
NOTE:
changes
automatically
every24
24hours.
hours.
NOTE:
The The
datedate
changes
automatically
every
2
2
13
MEN’S
DAY
/ DATE / 24
HOUR
Day/Date/24
Hour
DATE
date
day
DAY
A
A B
B C
C
A B
B C
C
A
A B
B C
C
A
24-HOUR
24
hour
crown position
crown
position
DATE
date
day
DAY
date
DATE
day
DAY
date
DATE
A B C
DATE
date
11 22 33
A B C
day
DAY
crown
crown
position
date
DATE
position
date
DATE
DAY
day
24-HOUR
24 hour
24-HOUR
24
hour
month setting
24-HOUR
24
hour
2424-HOUR
hour
MONTH SETTING
button
BUTTON
A
A B
B C
C
day
DAY
A
A B
B C
C
A B C
DAY
day
MONTH
month
24-HOUR
24 hour
crown
crown
position position
crown position
crown
position
DATE
date
SECOND
second
24
hour
24-HOUR
DATE
date
Totime:
set time:
To set
To set day:
1.
PULL
out
crown
to
C
position.
1. PULL out crown to C position.
1. PULL out crown to C position.
2. TURN crown either way to correct time.
2. TURN crown either way to correct time.
2. Advance time 24 hours to change the day.
3. PUSH in crown to A position.
3. PUSH in crown to A position.
3. PUSH in crown to A position.
NOTE: 24 hour indicator can change only
when setting the time.
Todate:
set date:
To set
NOTE the date changes automatically every 24 hours.
NOTE the date changes automatically
1. PULL out crown to B position.
To set month:
every2.24 TURN
hours.crown clockwise to correct date.
Push month setting button until the small
1. PULL
out crown
to B position.
3. PUSH
in crown
to A position.
2. TURN crown clockwise to correct date.
3. PUSH in crown to A position.
hand of month is set to the correct month.
3
14
MEN’S
Date/24 Hour
DATE / 24 HOUR
thetime:
time:
To To
setsetthe
A
1. PULL out Crown to B position.
1. PULL out Crown to B position.
2. TURN Crown counter-clockwise to correct time.
2. TURN
Crown
counter-clockwise
to correct time.
3. PUSH
in Crown
to A position.
3. PUSH in Crown to A position.
2•
4•
6•8
• 10 •
12 • 14 • 16 • 1
8•2
0•
22
•
B
C
crown position
24
the24
24 hour
hour indicator:
To To
setsetthe
indicator:
0•
1. PULL
Crown to
1. PULL
outoutCrown
toCCposition.
position.
2.
TURN
Crown
either
to to
correct
time. time.
2. TURN Crown eitherway
way
correct
3.
PUSH
in
Crown
to
A
position.
3. PUSH in Crown to A position.
To set the date:
To 1.
setPULL
theout
date:
Crown to B position.
1. PULL
outCrown
Crown
to B position.
2. TURN
clockwise
to correct date.
2. TURN
Crown
clockwise
to correct date.
3. PUSH
in Crown
to A position.
3. PUSH in Crown to A position.
DAY / DATE / 24 HOUR
Crown
Day
Day
Date
24 Hour
To set the time:
1. PULL out Crown to C position.
Crown
Date
24 Hour
15
MEN’S
3. PUSH in Crown to A position.
Day/Date/24 Hour
DAY / DATE / 24 HOUR
A
B
C
A
crown
Crown
Day
day
C
day
Day
date
Date
24
24 hour
Hour
B
crown
Crown
date
Date
24 hour
Hour
To set the time:
1. PULL out Crown to C position.
To set2. the
time:
TURN
Crown clockwise/counter-clockwise to correct time.
1. PULL
totoCAposition.
3. out
PUSHCrown
in Crown
position.
2. TURN Crown clockwise/counter-clockwise to correct time.
To set
the date:to A position.
3. PUSH
in Crown
1. PULL out Crown to B position.
2. TURN Crown counter-clockwise to correct date.
To set3. the
date:
PUSH
in Crown to A position.
1. PULL out Crown to B position.
2. TURN Crown counter-clockwise to correct date.
4
3. PUSH in Crown to A position.
To set the day:
1. PULL out Crown to C position.
2. Advance time 24 hours to change the day.
3. PUSH in Crown to A position.
Note: 24 Hour indicator changes automatically when time is adjusted.
16
MEN’S
3. PUSH in Crown to A position.
Note: 24 Hour indicator changes automatically when time is adjusted.
The Three Eye Chronograph
THE THREE EYE CHRONOGRAPH
This chronograph
watch
2 functions:
This chronograph
watch
hashas
2 functions:
TIME, STOPWATCH.
TIME, STOPWATCH.
The left eye (stopwatch hand) measures minutes
The left eye
(stopwatch
hand)
elapsed
on stopwatch,
up tomeasures
a maximum minutes
of 60 minutes.
elapsed on
stopwatch,
up
to
a
maximum
60 minutes.
The centre eye (stopwatch hand) measuresofseconds
elapsed on stopwatch, up to a maximum of 60 seconds.
It also shows measurement of elapsed time.
The centre eye (stopwatch hand) measures seconds
The right eye (24 hour hand) indicates time on a 24 hour
elapsed on
stopwatch, up to a maximum of 60 seconds.
basis.
PUSHER A
B
A
PUSHER B
stopwatch
24 hour
seconds
TIME measurement of elapsed time.
It also shows
To set time:
The right eye (24 hour hand) indicates time on a 24 hour basis.
1. PULL out crown to B position
2. TURN crown either way to correct time
TIME 3. PUSH crown to A position
NOTE: If eye indicating 24 hours needs adjustment, advance watch hands by 12 hours.
To set time:
1. PULL out crown to B position
STOPWATCH:
2. TURN crown either way to correct time
The stopwatch can measure up to 1 hour in minutes and seconds. Before using the stopwatch
3. PUSHensure
crownthat
tostopwatch
A position
hands are at the ‘60’ or ‘12 o’clock’ position.
NOTE: If eye indicating 24 hours needs adjustment, advance watch hands
adjust hands:
by 12 To
hours.
1. PULL out Crown to B positions.
2. PRESS pusher A or B to adjust hands.
STOPWATCH:
3. PUSH Crown to A position.
The stopwatch can measure up to 1 hour in minutes and seconds. Before using the
To set
stopwatch:
stopwatch
ensure
that stopwatch hands are at the 60 or 12 o’clock position.
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset stopwatch to ‘60’.
5
17
MEN’S
3. PUSH in Crown to A position.
Note: 24 Hour indicator changes automatically when time is adjusted.
The Three Eye Chronograph (continued)
THE THREE EYE CHRONOGRAPH
This
chronograph watch has 2 functions:
To adjust
hands:
PUSHER A
STOPWATCH.
1. PULL TIME,
out Crown
to B positions.
The left eye (stopwatch hand) measures minutes
2. PRESS
pusher
A or B toup
adjust
hands.of 60 minutes.
B
elapsed
on stopwatch,
to a maximum
A
3. PUSHThe
Crown
A (stopwatch
position. hand) measures seconds
centretoeye
PUSHER
B
elapsed on stopwatch, up to a maximum of 60 seconds.
It also shows measurement of elapsed time.
To set stopwatch:
stopwatch
24 hour
The right eye (24 hour hand) indicates time on a 24 hour
1. PRESS
pusher
A
to
start
timing.
basis.
seconds
2. PRESS pusher A to stop timing.
TIME
3. PRESS
pusher B to reset stopwatch to 60.
To set time:
1. PULL out crown to B position
To measure
elapsed
or split
2. TURN
crown either
way totime:
correct time
1. PRESS
A totostart
timing.
3. pusher
PUSH crown
A position
NOTE:
If eye
hours needs
adjustment, advance
watchtohands
by seconds
12 hours. elapsed
2. PRESS
pusher
Bindicating
to stop 24
timing.
The stopwatch
continues
count
but the hands do not move.
STOPWATCH:
3. PRESS pusher B again to resume timing.
The stopwatch can measure up to 1 hour in minutes and seconds. Before using the stopwatch
The hands
move
indicate
and continue
ensure
thatquickly
stopwatchtohands
are atelapsed
the ‘60’ or time
‘12 o’clock’
position. counring.
To adjust
NOTE: The
hour, hands:
minute and second hands on the watch will continue to indicate
1. PULL out Crown to B positions.
the correct time while using the stopwatch.
2. PRESS pusher A or B to adjust hands.
3. PUSH Crown to A position.
If stopwatch hands do not return to 60 when the stopwatch is reset:
stopwatch:
1. PULL To
outsetthe
crown.
1. PRESS pusher A to start timing.
2. PRESS pushers A or B repeatedly to move hands to 60 position.
2. PRESS pusher A to stop timing.
3. PUSH3.in the
crown.
PRESS
pusher B to reset stopwatch to ‘60’.
5
18
MEN’S
6,9,12 THREE-EYE
6, 9, 12 Three-Eye Chronograph
With and Without Date
CHRONOGRAPH WITH & WITHOUT DATE
1/10 seconds
1/10 seconds
PUSHER A
crown
position
PUSHER A
crown
position
A B
A C
C
PUSHER B
PUSHER B
minute
minute
seconds
Crown position “A”, “B” & “C”.
Pushers “A” (top) & “B” (bottom)
12 o’clock eye “1/10 seconds elapsed”
Crown position
, B“minutes
& C. elapsed”
9 o’clockAeye
o’clockand
eye “seconds
elapsed”
Pushers A6(top)
B (bottom).
seconds
CALENDAR
To set the calendar:
12 o’clock eye 1/10 seconds elapsed.
1. PULL out crown to B position.
This chronograph watch has 3 functions:
9 o’clock eye minutes elapsed.
2. TURN crown clockwise to correct date.
TIME, CALENDAR, STOPWATCH
6 o’clock eye seconds elapsed.
3. PUSH in crown to A position.
This chronograph watch has 3 functions:
TIME, CALENDAR, STOPWATCH.
TIME
To set the time:
1. PULL crown to C position.
2. TURN crown either way to correct time.
3. PUSH crown into A position.
NOTE: The date changes automatically every
624 hours.
STOPWATCH
The stopwatch is capable of measuring:
1/10 seconds elapsed up to one second (top eye).
Minutes elapsed up to one hour (middle eye).
Seconds elapsed up to one minute (bottom eye)
* BEFORE USING THE STOP WATCH, reset the
stopwatch hands to the 60 and 0 positions.
19
MEN’S
BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “0” positions.
2, 6, 10 Three-Eye Chronograph
2,6,10 THREE-EYE CHRONOGRAPH
NOTE:
Crown
position “1”,
& “3”
NOTE:
Crown
position
1, 2“2”and
3
NOTE:
Pushers
“A”
(top)
&
“B”
NOTE: Pushers A (top) and B (bottom)
(bottom)
NOTE:
“minutetotalizer
totalizer”
NOTE:
LeftLeft
eyeeyeminute
NOTE: Right eye “small second”
NOTE:
Right eye small second
NOTE: Centre eye “date indicator”
NOTE: Centre eye date indicator
seconds
minute
PUSHER A
1 2
3
crown position
This chronograph watch has 3 functions:
This TIME,
chronograph
watch has 3 functions:
CALENDAR, STOPWATCH
PUSHER B
TIME, CALENDAR, STOPWATCH
TIME
TIMETo set the time:
To set
1. the
PULLtime:
Crown to position “3” .
date
1. PULL
Crown
to position
2. TURN
Crown
either way 3.
to correct time.
3. PUSH
Crown
to position
“1” correct
.
2. TURN
Crown
either
way to
time.
3. PUSH Crown to position 1.
CALENDAR
To set the calendar:
7
1. PULL Crown to position 2.
2. TURN Crown clockwise to correct the date.
3. PUSH in Crown to position 1.
STOPWATCH
The stopwatch is capable of measuring:
1. Minutes elapsed up to 30 minutes (left eye).
2. Chronograph hand 1/5 second
BEFORE USING THE STOPWATCH, reset the stopwatch hands to the 60 position by
means of pusher B. If stopwatch Hands move improperly, reset the hands as follows:
20
MEN’S
2, 6, 10 Three-Eye Chronograph (continued)
To reset stopwatch hands:
1. PRESS Pusher A and B.
2. PRESS Pusher B intermittently until the left eye hand is reset to 0.
3. PRESS Pusher A intermittently until the chronograph hand reset to 60.
4. PRESS Pusher A and B.
NOTE: PRESSING and HOLDING either Pusher A or B will cause the hands
to continue to move until the pusher is released.
Standard stopwatch measurement:
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher B to reset.
Accumulated elapsed time measurement:
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher A to restart timing.
4. PRESS Pusher A to stop 2nd timing.
5. PRESS Pusher B to reset.
Split time measurement:
1. PRESS Pusher A to start timing.
2. PRESS Pusher B to split.
3. PRESS Pusher B to begin again.
4. PRESS Pusher A to stop.
5. PRESS Pusher B to reset.
Timing 2 competitors:
1. PRESS Pusher A to start timing of first event.
2. PRESS Pusher B to stop timing of first event. Stopwatch continues to run internally.
3. PRESS Pusher A to stop timing of second event.
4. PRESS Pusher B to view time of second event.
5. PRESS Pusher B to reset.
21
MEN’S
4. PRESS Pusher “B” to view time of second event.
5. PRESS Pusher “B” to reset.
6, 12 Two Eye Chronograph With Date
Crown position A, B and C. 6,12 TWO-EYE CHRONOGRAPH
Pushers A (top) and B (bottom).
position
“B” & “C”. 60 minute.
6 o’clock eyeCrown
1 minute
up“A”to, maxinum
Pushers
“A”
(top)
&
“B”
(bottom).
12 o’clock eye second.
6 o’clock eye “1 minute up to maxinum 60 minute”.
12 o’clockwatch
eye “second”.
This chronograph
has 3 functions:
WITH DATE
stopwatch second
STOPWATCH
SECOND
PUSHER A
crown position
TIME, CALENDAR, STOPWATCH.
This chronograph watch has 3 functions:
A B
TIME, CALENDAR, STOPWATCH.
TIME
To set the time:
TIME
PUSHER B
To set
time:
1. PULL Crown
to the
C position.
1. PULL
Crown
“C”correct
position.time.
2. TURN Crown
either
waytoto
2.
TURN
Crown
either
to correct
time.
3. PUSH Crown in to A position,way
small
second
3. to
PUSH
hand begins
run.Crown in to “A” position, small second hand begins to run.
CALENDARCALENDAR
To set the calendar:
To set the calendar:
C
second HAND
hand
SECOND
stopwatch minute
STOPWATCH
MINUTE
Standard stopwatch measurement:
1. PULL out Crown to “B” position.
1. PRESS Pusher A to start timing.
1. PULL out Crown to B position.
2. TURN Crown clockwise to correct date.
2. PRESS Pusher A to stop timing.
2. TURN Crown
clockwise to correct date.
3. PUSH in Crown to “A” position.
PRESS Pusher B to reset.
3. PUSH in Crown
to
A
position.
NOTE: The date changes automatically every 243.
hours.
NOTE: The date changes automatically
Accumulated elapsed time measurement:
every 24 hours.
STOPWATCH
1. PRESS Pusher A to start timing.
The stopwatch is capable of measuring:
2. PRESS Pusher A to stop timing.
STOPWATCH
1/1 second elapsed up to 12 hours.
3. PRESS
to restart timing.
The stopwatch
is capable
measuring:
BEFORE
USING THE of
STOP
WATCH, reset the stopwatch
handsPusher
to the “0”A positions.
4. PRESS Pusher A to stop 2nd timing.
1/1 second elapsed up to 12 hours.
To reset
stopwatch
hands: reset
5. PRESS Pusher B to reset.
BEFORE USING
THE
STOP WATCH,
1. hands
PULL Crown
to 0
position
“C”.
the stopwatch
to the
positions.
2. PRESS Pusher “A” intermittently until the chronograph second hand is reset to “0”.
To reset stopwatch hands:
1. PULL Crown to position C.
2. PRESS Pusher A intermittently until the
chronograph second hand is reset to 0.
9
22
MEN’S
4. PRESS Pusher “A” to stop 2nd timing.
5. PRESS Pusher “B” to reset.
3, 6, 9, 12 Four Eye Chronograph
3,6,9,12 FOUR-EYE CHRONOGRAPH
Crown
positionA“A”
& “B”
NOTE:NOTE:
Crown
position
and
B
NOTE:
Pushers
“A”
(top)
&
“B”(bottom)
(bottom)
NOTE: Pushers A (top) and B
12 o’clock
eye1/10
“1/10”
seconds elapsed”
NOTE:NOTE:
12 o’clock
eye
ororseconds
elapsed
NOTE: 9 o’clock eye “minutes elapsed”
NOTE: 9 o’clock eye minutes elapsed
NOTE: 6 o’clock eye “seconds elapsed”
NOTE: 6 o’clock eye seconds elapsed
NOTE: 3 o’clock eye “24-hour”
NOTE: 3 o’clock eye 24-hour
This chronograph watch has 2 functions:
This chronograph
watch has 2 functions:
TIME, STOPWATCH.
TIME, STOPWATCH.
1/10 seconds
PUSHER A
crown position
B
A
PUSHER B
stopwatch minute
STOPWATCH
MINUTE
24 hour
24-HOUR
stopwatch second
STOPWATCH
SECOND
TIME
TIMETo set the time:
To set1.the
time:
PULL
Crown to “B” position.
2. Crown
TURN Crown
way to correct time.
1. PULL
to Beither
position.
3. PUSH
Crown
in toway
“A” position.
2. TURN
Crown
either
to correct time.
3. PUSH Crown in to A position.
STOPWATCH
The stopwatch is capable of measuring:
STOPWATCH
1/10 seconds elapsed
up to 60of
minutes
(top eye).
The stopwatch
is capable
measuring:
Minutes elapsed up to one hour (middle eye).
1/10 seconds elapsed up to 60 minutes (top eye).
Seconds elapsed up to one minute (bottom eye)
Minutes elapsed up to one hour (middle eye).
Seconds
elapsed up to one minute (bottom eye)
BEFORE USING THE STOPWATCH, reset the stopwatch hands to the “60” and “0” positions.
BEFORE USING THE STOPWATCH, reset the stopwatch hands to
the 60 and 0 positions.
To reset stopwatch hands:
10
1. PULL Crown to position B.
2. PRESS Pusher A intermittently until the top eye hand is reset to 0.
3. PRESS Pusher B intermittently until the minute and second eye hands reset to 60.
NOTE: PRESSING and HOLDING either Pusher A or B will cause the hands to continue
to move until the pusher is released.
23
MEN’S
4. PRESS Pusher “A” to stop 2nd timing.
5. PRESS Pusher “B” to reset.
3, 6, 9, 12 Four Eye Chronograph (continued)
3,6,9,12 FOUR-EYE CHRONOGRAPH
NOTE:stopwatch
Crown positionmeasurement:
“A” & “B”
Standard
1/10 seconds
NOTE: Pushers “A” (top) & “B” (bottom)
1. PRESS Pusher A to start timing.
NOTE: 12 o’clock eye “1/10” or seconds elapsed”
2. PRESS
A eye
to stop
timing.
NOTE:Pusher
9 o’clock
“minutes
elapsed”
3. PRESS
Beye
to reset.
NOTE:Pusher
6 o’clock
“seconds elapsed”
NOTE: 3 o’clock eye “24-hour”
Accumulated elapsed time measurement:
This chronograph watch has 2 functions:
1. PRESS
A to start timing.
TIME,Pusher
STOPWATCH.
2. PRESS Pusher A to stop timing.
TIMEPusher A to restart timing.
3. PRESS
To setPusher
the time:A to stop 2nd timing.
4. PRESS
1. PULL Crown to “B” position.
5. PRESS Pusher B to reset.
2. TURN Crown either way to correct time.
3. PUSH Crown in to “A” position.
PUSHER A
crown position
B
A
PUSHER B
stopwatch minute
STOPWATCH
MINUTE
24 hour
24-HOUR
stopwatch second
STOPWATCH
SECOND
Split time measurement:
STOPWATCH
1. PRESS
Pusher A to start timing.
The stopwatch
capable
measuring:
2. PRESS
Pusher Bisto
stop of
split.
1/10 seconds elapsed up to 60 minutes (top eye).
3. PRESS
Pusher
totobegin
again.
Minutes
elapsedBup
one hour
(middle eye).
4. PRESS
Pusher
A
to
stop.
Seconds elapsed up to one minute (bottom eye)
5. PRESS Pusher B to reset.
BEFORE USING THE STOPWATCH, reset the stopwatch hands to the “60” and “0” positions.
10
24
MEN’S
3,6,9,
3, 6, 9, Three
EyeTHREE-EYE
Chronograph With Date
CHRONOGRAPH WITH DATE
24 hour
24-HOUR
24 hour
24-HOUR
PUSHER A
crown position
A
PUSHER A
crown position
B
A
PUSHER B
STOPWATCH
stopwatchMINUTE
minute
B
C
PUSHER B
STOPWATCH
stopwatchMINUTE
minute
stopwatch second
STOPWATCH
SECOND
stopwatch second
STOPWATCH
SECOND
Crown position “A”, “B” & “C”.
Crown
position
B and
C.
Pushers
“A” (top)A,& “B”
(bottom).
Pushers
A
(top)
and
B
(bottom).
3 o’clock eye “24-hour”.
3 o’clock
24-hour.
9 o’clockeye
eye “minutes
elapsed”.
9 o’clock
minuteselapsed”.
elapsed.
6 o’clockeye
eye “seconds
6 o’clock eye seconds elapsed.
This chronograph watch has 2 functions:
TIME,
STOPWATCH. watch has 2 functions:
This
chronograph
TIME, STOPWATCH.
TIME
To set the time:
TIME
To 1.setPULL
theCrown
time:to “B” position.
2. TURN Crown either way to correct time.
1. PULL Crown to B position.
3. PUSH Crown in to “A” position.
2. TURN Crown either way to correct time.
3. PUSH
Crown in to A position.
CALENDAR
STOPWATCH
The stopwatch is capable of measuring:
Minutes elapsed up to one hour (left eye).
Seconds elapsed up to one minute
(bottom eye)
To set the calendar:
CALENDAR
1. PULL out Crown to “B” position.
To 2.setTURN
theCrown
calendar:
clockwise to correct date.
1. PULL
outin Crown
position.
3. PUSH
Crown toto
“A”Bposition.
2. TURN
Crown
to correct
date.
NOTE: The
date clockwise
changes automatically
every
24 hours.
3. PUSH in Crown to A position.
STOPWATCH
The stopwatch
capable ofautomatically
measuring:
NOTE:
The dateischanges
every 24 hours
Minutes elapsed up to one hour (left eye).
Seconds elapsed up to one minute (bottom eye)
25
MEN’S
3, 6, 9, Three Eye Chronograph With Date (continued)
BEFORE USING THE STOP WATCH, reset the stopwatch hands
to the 60 and 12 o’clock positions.
To reset stopwatch hands:
1. PULL Crown to position B.
2. PRESS Pusher A or B intermittently until the stopwatch minute and
second hand is reset to 0.
NOTE: By pressing Pusher A, the hands move counter clockwise.
By pressing Pusher B, the hands move clockwise.
Standard stopwatch measurement:
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher B to reset.
Split time:
1. PRESS Pusher A to start timing.
2. PRESS Pusher B to stop split.
3. PRESS Pusher B to begin again.
4. PRESS Pusher A to stop.
5. PRESS Pusher B to reset.
Accumulated elapsed time measurement:
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS Pusher A to restart timing.
4. PRESS Pusher A to stop 2nd timing.
5. PRESS Pusher B to reset.
26
MEN’S
6, 9, 12 Three Eye 1/20 Second
Chronograph
6, 9,
12 THREE EYEWith Date
1/20 SECOND CHRONOGRAPH WITH DATE
Crown position A,Crown
B andposition
C. “A”, “B” & “C”.
Pushers “A” (top) & “B” (bottom).
Pushers A (top) and B (bottom).
6 o’clock eye “hour & minutes elapsed”.
6 o’clock eye hour and minutes elapsed.
9 o’clock eye “second”.
9 o’clock eye second.
12 o’clock eye “1/20 seconds elapsed”.
12 o’clock eye 1/20 seconds elapsed.
1/20
1/20 SECONDS
seconds
stopwatch second
STOPWATCH
SECOND
PUSHERAA
PUSHER
crown position
crown
position
second
SECOND
A B C
C
A
This chronograph watch has 3 functions:
This chronograph
watch
has 3 CALENDA.
functions:
TIME,
STOPWATCH,
TIME, STOPWATCH, CALENDAR.
TIME
To set the time:
TIME
To set the time: 1. PULL Crown to “C” position.
PUSHERBB
PUSHER
stopwatch
hour
STOPWATCH
HOUR
stopwatch
minute
STOPWATCH
MINUTE
TURN Crown either way to correct time.
1. PULL Crown to2.C position.
3.
in to “A”time.
position.
2. TURN Crown eitherPUSH
wayCrown
to correct
3. PUSH Crown in to A position.
CALENDAR
To set the calendar:
CALENDAR
1. PULL out Crown to “B” position.
To set the calendar:
2. TURN Crown clockwise to correct date.
1. PULL out Crown to B position.
3. PUSH in Crown to “A” position.
2. TURN Crown clockwise
correct
NOTE: Theto
date
changesdate.
automatically every 24 hours.
3. PUSH in Crown to A position.
Do not set the date between 9:00 PM and 1:00 AM.
NOTE: The date changes automatically every 24 hours.
Do not set the date
between 9:00 PM and 1:00 AM.
STOPWATCH
The stopwatch is capable of measuring:
STOPWATCH Hour & Minutes elapsed up to 12 hours (bottom eye).
1/20
Seconds elapsed
up to 12 hours (top eye).
The stopwatch is
capable
of measuring:
Secondsup
elapsed
to 12 hours.
Hour & Minutes elapsed
to 12uphours
(bottom eye).
1/20 Seconds elapsed up to 12 hours (top eye).
USING
THE STOP WATCH, reset the stopwatch hands to the “60” and “12 o’clock”
Seconds elapsed BEFORE
up to 12
hours.
positions.
BEFORE USING THE STOP WATCH, reset the stopwatch hands
To reset stopwatch hands:
to the 60 and 12 o’clock
1. PULLpositions.
Crown to position “C”.
2. PRESS Pusher “A” for 2 seconds until the stopwatch hour, minute and second hand is reset to
27 MEN’S
“0”.
6, 9, 12 Three Eye 1/20 Second Chronograph With Date (continued)
6, 9, 12 THREE EYE
1/20 SECOND CHRONOGRAPH WITH DATE
Crown position “A”, “B” & “C”.
Pushers “A” (top) & “B” (bottom).
1. PULL Crown to position C.
6 o’clock eye “hour & minutes elapsed”.
2. PRESS Pusher
A eye
for “second”.
2 seconds until the stopwatch
9 o’clock
hour, minute 12
and
second
hand
is reset
to 0.
o’clock
eye “1/20
seconds
elapsed”.
To reset stopwatch hands:
Standard stopwatch
measurement:
This chronograph
watch has 3 functions:
1/20 SECONDS
seconds
1/20
stopwatch second
STOPWATCH
SECOND
PUSHERAA
PUSHER
crown position
crown
position
second
SECOND
A B C
C
A
PUSHERBB
PUSHER
1. PRESS Pusher
A to start timing.
TIME, STOPWATCH,
CALENDA.
2. PRESS Pusher A to stop timing.
stopwatch
hour
stopwatch
minute
STOPWATCH
STOPWATCH
MINUTE
HOUR
3. PRESS Pusher
TIME B to reset.
To set the time:
Split time: 1. PULL Crown to “C” position.
2. TURN
Crown
way to correct time.
1. PRESS Pusher
A to
starteither
timing.
3.
PUSH
Crown
in
to
“A”
2. PRESS Pusher B to stop split. position.
3. PRESS Pusher B to begin again.
CALENDAR
4. PRESS Pusher
A to stop.
To set the calendar:
5. PRESS Pusher B to reset.
1. PULL out Crown to “B” position.
2. TURN Crown clockwise to correct date.
Accumulated
time
measurement:
3. elapsed
PUSH in Crown
to “A”
position.
1. PRESS Pusher
A
to
start
timing.
NOTE: The date changes automatically every 24 hours.
2. PRESS Pusher ADotonot
stop
timing.
set the
date between 9:00 PM and 1:00 AM.
3. PRESS Pusher A to restart timing.
4. PRESS Pusher
A to stop 2nd timing.
STOPWATCH
5. PRESS Pusher
B to reset.
The stopwatch
is capable of measuring:
Hour & Minutes elapsed up to 12 hours (bottom eye).
1/20 Seconds elapsed up to 12 hours (top eye).
Timing 2 competitors:
Seconds
to 12 hours.
1. PRESS pusher
A elapsed
to startuptiming.
2. PRESS pusher B to stop timing of first event. Stopwatch continues to run internally.
BEFORE
THE
STOP of
WATCH,
resetevent.
the stopwatch hands to the “60” and “12 o’clock”
3. PRESS pusher
A USING
to stop
timing
second
positions.
4. PRESS pusher B to view time of second event.
5. PRESS pusher
B stopwatch
to reset. hands:
To reset
1. PULL Crown to position “C”.
2. PRESS Pusher “A” for 2 seconds until the stopwatch hour, minute and second hand is28
reset to
MEN’S
“0”.
5. PRESS pusher “B” to reset.
Digital With Alarm/Dual Time/Chronograph
DIGITAL WITH ALARM / DUAL TIME / CHRONOGRAPH
EL
S1
dual time
DUAL
TIME
change
mode S3
CHANGE
S2
S2
SETTING
EL
MODE
S3
S1
setting
FEATURES
Hour, Minute, Second
FEATURES
Day, Date, Month
Hour,
Second
DualMinute,
Time, Alarm,
Timer
Day,
Date, Month
Chronograph
1/100 Second with Split Back Light (EL)
Dual Time, Alarm, Timer
15 Light (EL)
Chronograph 1/100 Second with Split Back
OPERATION MODES
1. PRESS S3 once to view Time, Day, Date, Month
2. PRESS S3 once to view Alarm
3. PRESS S3 once to view Chronograph
5. PRESS S3 once to set Timer
6. PRESS S3 again back to Time Mode
SETTING SEQUENCE
A) NORMAL TIME SETTING
1. HOLD S2 2 seconds to set Second; Press S1 for 00
2. PRESS S3 once to set Minute; Press S1 to advance
3. PRESS S3 once to set Hour; Press S1 to advance
4. PRESS S3 once to set hour display; Press S1 to set 12H/24H
5. PRESS S3 once to set Month; Press S1 to advance
6. PRESS S3 once to set Date; Press S1 to advance
7. PRESS S3 once to set Day; Press S1 to advance
8. PRESS S2 once when setting is complete. Normal time will be displayed.
29
MEN’S
Digital With Alarm/Dual Time/Chronograph (continued)
B) DUAL TIME SETTING .
1. PRESS S1 to Dual Time
2. HOLD S2 2 seconds to set Minute; Press S1 for 00
3. PRESS S3 once to set Hour; Press S1 to advance
4. PRESS S2 once when setting is complete. Normal time will be displayed.
C) ALARM SETTING
PRESS S3 to Alarm Mode
1. PRESS S1 once to on Alarm ONLY
2. PRESS S1 once to on Chime ONLY
3. PRESS S1 once to on Alarm and Chime
4. PRESS S1 once to off Alarm and Chime
5. HOLD S2 2 seconds to set Hour; Press S1 to advance
6. PRESS S3 once to set Minute; Press S1 to advance
7. PRESS S2 once when setting is complete. Return to Alarm Mode.
D) CHRONOGRAPH
PRESS S3 twice to Chronograph function
1. PRESS S1 to Start/ Stop timing
2. PRESS S2 to Split time
3. PRESS S1, then S2 to Reset
E) TIMER
PRESS S3 three times to Time Mode
1. HOLD S2 2 seconds to set Hour; Press S1 to advance
2. PRESS S3 once to set Minute; Press S1 to advance
3. PRESS S2 once when setting is complete.
4. RESS S1 to Start/Stop
5. PRESS S2 to Reset
When counting is complete, alarm will sound.
30
MEN’S
ANA-DIGIT
Ana-Digit
EL
EL
S2
S2
S1
S1
FEATURES
FEATURES
Hour,
Minute, Second
Hour,
Minute,
Second
Month, Date
Month, Date
Back Light (EL)
Back Light (EL)
NORMAL TIME MODE
1. PRESSTIME
S1 onceMODE
to view Month & Date
NORMAL
2. PRESS
twice to
Second
1. PRESS
S1S1once
toview
view
Month and Date
3. PRESS S2 once, ""Time"" & ""Date"" mode will be displayed alternatively
2. PRESS
S1S1twice
to view
Second
PRESS
twice, back
to Time
mode"
3. PRESS
S2ELonce,
Time
and Date mode will be displayed alternatively
4. PRESS
to light-up
display
PRESS S1 twice, back to Time mode
SETTINGELSEQUENCE
4. PRESS
to light-up display
1. PRESS S2 twice to set "Month"; Press S1 to advance
2. PRESS S2 once to set "Date"; Press S1 to advance
SETTING
3. PRESSSEQUENCE
S2 once to set "Hour"; Press S1 to advance
1. PRESS
S2S2twice
Month;
Press
to advance
4. PRESS
once totosetset
"Minute";
Press
S1 to S1
advance
5.
PRESS
S2
once
when
setting
is
complete.
Normal
time will be displayed (Press S1 if time mode
2. PRESS S2 once to set Date; Press S1 to advance
does not flash).
3. PRESS S2 once to set Hour; Press S1 to advance
4. PRESS S2 once to set Minute; Press S1 to advance
17 Normal time will be displayed
5. PRESS S2 once when setting is complete.
(Press S1 if time mode does not flash).
31
MEN’S
Digital With Alarm, Chronograph 1/100 Sec, Countdown and Dual Time
DIGITAL WITH ALARM, CHRONOGRAPH 1/100 SEC,
COUNTDOWN & DUAL TIME
FEATURES FEATURES
Hour, Minute,Hour,
Second
Minute, Second
Day, Date, Month
Day, Date, Month
Dual Time, Alarm,
Countdown
Dual Time,
Alarm, Countdown
ChronographChronograph
1/100 Second
lapwith
control
1/100with
Second
lap control
Back Light (EL)
Back Light (EL)
EL
EL
S1
S3
S3
S2
S2
S1
SETTING SEQUENCE
SETTING SEQUENCE
NORMAL
TIME SETTING
A) NORMALA)TIME
SETTING
HOLD S2to
3 seconds
to “Second”;
S1 or
for 00
1. HOLD S2 31.seconds
Second;
Press S1Press
or S3
forS300
PRESS
S2 once
to set Press
“Minute”;
S1 or
to advance
/ backward
2. PRESS S2 2.once
to set
Minute;
S1Press
or S3
toS3
advance
/ backward
3. PRESS S2 once to set “Hour”; Press S1 or S3 to advance / backward
3. PRESS S2 once to set Hour; Press S1 or S3 to advance / backward
4. PRESS S2 once to set “Year”; Press S1 or S3 to advance / backward
4. PRESS S2 once to set Year; Press S1 or S3 to advance / backward
5. PRESS S2 once to set “Month”; Press S1 or S3 to advance / backward
5. PRESS S2 6.once
to set
Month;
S1 orS1S3
backward
PRESS
S2 once
to setPress
“Day”; Press
or to
S3 advance
to advance // backward
6. PRESS S2 7.once
to S2
set3 Day;
Press
S1 toornormal
S3 totime
advance
HOLD
seconds
to return
display. / backward
7. HOLD S2 3 seconds to return to normal time display.
B) DUAL TIME SETTING
B) DUAL TIME
SETTING
1. PRESS
S1 to Dual Time
1. PRESS S1 2.to Dual
HOLD Time
S2 2 seconds to set "Minute"; Press S1 for 00
PRESS S3toonce
set "Hour";
Press S1
S1 tofor
advance
2. HOLD S2 23.seconds
settoMinute;
Press
00
4.
PRESS
S2
once
when
setting
is
complete.
Normal
time will be displayed.
3. PRESS S3 once to set Hour; Press S1 to advance
4. PRESS S2 once when setting is complete. Normal time will be displayed.
C) ALARM SETTING
PRESS S3 to Alarm Mode
C) ALARM SETTING
1. PRESS S1 to "Alarm 1" – “Alarm 5”
PRESS S3 to Alarm Mode
2. HOLD S2 2 seconds until “AL” flash
1. PRESS S1 to Alarm 1 – Alarm 5
PRESS S1/S3 to set “Alarm” / “Chime”
2. HOLD S2 23.seconds
flash
PRESS S2until
onceAL
to set
“Hour” Press S1 or S3 to advance / backward
PRESS S1/S3
to
set
Alarm
/
Chime
4. PRESS S2 once to set “Minute” Press S1 or S3 to advance / backward
3. PRESS S2 5.once
to S2
set3 Hour
Press
or S3
to advance
HOLD
seconds
when S1
setting
is complete.
Return/tobackward
Alarm Model.
4. PRESS S2 once to set Minute Press S1 or S3 to advance / backward
5. HOLD S2 3D)seconds
when
setting
is complete. Return to Alarm Model.
COUNTDOWN
TIMER
SETTING
(i) PRESS S3 twice to Countdown Timer function [T1] (1~90 mins)
1) HOLD S2 2 seconds to set "Minute"; Press S1/S3 to advance / backward
2) HOLD S2 3 sec to end setting
3) PRESS S2 to start/stop countdown
32
MEN’S
Digital With Alarm, Chronograph 1/100 Sec,
Countdown and Dual Time (continued)
D) COUNTDOWN TIMER SETTING
(i) PRESS S3 twice to Countdown Timer function [T1] (1~90 mins)
1) HOLD S2 2 seconds to set Minute; Press S1/S3 to advance / backward
2) HOLD S2 3 sec to end setting
3) PRESS S2 to start/stop countdown
(ii) PRESS S1 to get into Countdown timer [T2] (from normal time to preset time –
within 24hrs)
1) HOLD S2 3 seconds to set Hour; Press S1/S3 to advance / backward
2) PRESS S2 once to set Minute Press S1 or S3 to advance / backward
3) HOLD S2 3 sec to end setting
4) PRESS S2 to start/stop countdown. Time different between Normal time and
Preset time will be shown
(iii) PRESS S1 to get into Countdown Day Timer [T3]
1) HOLD S2 3 seconds to set Year; Press S1/S3 to advance / backward
2) PRESS S2 once to set Month Press S1 or S3 to advance / backward
3) PRESS S2 once to set Day Press S1 or S3 to advance / backward
4) PRESS S2 once when setting is complete.
E) CHRONOGRAPH
PRESS S3 three times to Chronograph Mode
1) PRESS S1 to select LAP (LAP) or Split (SPL) option
2) PRESS S2 to start/stop
3) PRESS S1 to get Lap/Split time
5) HOLD S2, then press S1 to Reset
33
MEN’S
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising