Rectangular Ultra Frame™ Pool
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
OWNER’S MANUAL
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
Rectangular Ultra
Frame™ Pool
157-1/2”x78-3/4”x39-3/8” (400cm x 200cm x 100cm)
15’ x 9’ (457 cm x 274 cm), 18’ x 9’ (549 cm x 274 cm)
24’ x 12’ (732 cm x 366 cm), 32’ x 16’ (975 cm x 488 cm)
For illustrative purposes only. Accessories may not be provided with pool.
Don’t forget to try these other fine Intex products: Pools, Pool
Accessories, Inflatable Pools and In-Home Toys, Airbeds and
Boats available at fine retailers or visit our website listed below.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
IMPORTANT!
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, visit
www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacific Time
119-*PO-R1-1507
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
TABLE OF CONTENTS
Warnings..........................................................................................3
Parts References............................................................................4-7
Setup Instructions..........................................................................8-12
Pool Maintenance and Chemicals.................................................13-14
Common Pool Problems................................................................13
Pool Draining...................................................................................14
Storage.............................................................................................14-15
General Aquatic Safety...................................................................16
Limited Warranty.............................................................................17
Pool Safety Sign..............................................................................18
Introduction:
Thanks for buying an Intex pool. Please read this manual before setting up your pool.
This information will help extend the pool life and make the pool safer for your family's
enjoyment. View the video included before installation. A team of 2-4 people is
recommended for pool set up. Additional people will speed up the installation.
SAVE THESE INSTRUCTIONS
Page 2
119
PO
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
IMPORTANT SAFETY RULES
Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
WARNING
• Continuous and competent adult supervision of children and the disabled is required at all times.
• Secure all doors, windows and safety barriers to prevent unauthorized, unintentional or unsupervised pool entry.
• Install a safety barrier that will eliminate access to the pool for young children and pets.
• Pool and pool accessories are to be assembled and disassembled by adults only.
• Never dive, jump or slide into an above-ground pool or any shallow body of water.
• Failure to set up pool on flat, level, compact ground or over filling could result in the pool’s collapse and the possibility that a person lounging in the pool could be swept out/ejected.
• Do not lean, straddle, or exert pressure on the inflatable ring or top rim as injury or flooding could occur. Do not allow anyone to sit on, climb, or straddle the sides of the pool.
• Remove all toys and flotation devices from, in, and around the pool when it is not in use. Objects in the pool attract young children.
• Keep toys, chairs, tables, or any objects that a child could climb on at least four feet (1.22 meters) away from the pool.
• Keep rescue equipment by the pool and clearly post emergency numbers at the phone closest to the pool. Examples of rescue equipment: coast guard approved ring buoy with attached rope, strong rigid pole not less than twelve feet (12') [3.66m] long.
• Never swim alone or allow others to swim alone.
• Keep your pool clean and clear. The pool floor must be visible at all times from the outside barrier of the pool.
• If swimming at night use properly installed artificial lighting to illuminate all safety signs, ladders, pool floor and walkways.
• Stay away from the pool when using alcohol or drugs/medication.
• Keep children away from pool covers to avoid entanglement, drowning, or other serious injury.
• Pool covers must be completely removed before pool use. Children and adults cannot be seen under a pool cover.
• Do not cover the pool while you or anyone else is in the pool.
• Keep the pool and pool area clean and clear to avoid slips and falls and objects that may cause injury.
• Protect all pool occupants from recreational water illnesses by keeping the pool water sanitized. Don’t
swallow the pool water. Practice good hygiene.
• All pools are subject to wear and deterioration. Certain types of excessive or accelerated deterioration can lead to an operation failure, and can ultimately cause the loss of large quantities of water from your pool. Therefore, it is very important that you properly maintain your pool on a regular basis.
• This pool is for outdoor use only.
• Empty pool completely when not in use for a longer period and safely store the empty pool in such a way that it does not collect water from rain or any other source. See storage instructions.
• While the swimming pool is in use, you will need to operate the filter pump to ensure that there is at least one complete turnover of water a day. Consult your pump’s manual to calculate the necessary
operating hours.
POOL BARRIERS AND COVERS ARE NOT SUBSTITUTES FOR CONTINUOUS AND COMPETENT
ADULT SUPERVISION. POOL DOES NOT COME WITH A LIFEGUARD. ADULTS ARE THEREFORE
REQUIRED TO ACT AS LIFEGUARDS OR WATER WATCHERS AND PROTECT THE LIVES OF ALL
POOL USERS, ESPECIALLY CHILDREN, IN AND AROUND THE POOL.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY
DAMAGE, SERIOUS INJURY OR DEATH.­
Advisory:
Pool owners may need to comply with local or state laws relating to childproof fencing, safety barriers, lighting,
and other safety requirements. Customers should contact their local building code enforcement office for
further details.
SAVE THESE INSTRUCTIONS
Page 3
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
For Pools with Dual Suction Outlets Configuration:
In order to comply with the requirement of the Virginia Grahame Baker Act (for USA and Canada), your
pool is designed with dual suction outlets and one inlet fittings. Overview of the dual suction outlets
configuration is as follow:
20
1
2
21
3
4
8
5
16
25 19
17
24
7
23
22
9
15
11
10
13
12
157-1/2” x 78-3/4” (400cm x 200cm)
20
1
21
3
19
4
2
5
16
17
8
26 27 28 29
6
30 31 32
7
18
14
33 23
22
11
12
13
15
9
10
15’ x 9’ (457cm x 274cm) and above
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
SAVE THESE INSTRUCTIONS
Page 4
119
PO
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
POOL SIZE & QUANTITIES
REF.
NO.
DESCRIPTION
1
SINGLE BUTTON SPRING
2
HORIZONTAL BEAM (A) (SINGLE BUTTON SPRING INCLUDED)
3
HORIZONTAL BEAM (B) (SINGLE BUTTON SPRING INCLUDED)
4
HORIZONTAL BEAM (C)
5
HORIZONTAL BEAM (D) (SINGLE BUTTON SPRING INCLUDED)
6
HORIZONTAL BEAM (E) (SINGLE BUTTON SPRING INCLUDED)
7
HORIZONTAL BEAM (F)
8
CORNER JOINT
9
U-SUPPORT END CAP
10
DOUBLE BUTTON SPRING CLIP
11
U-SHAPED SIDE SUPPORT (U-SUPPORT END CAP & DOUBLE BUTTON SPRING CLIP INCLUDED)
12
CONNECTING ROD
13
RESTRAINER STRAP
14
GROUND CLOTH
15
POOL LINER (DRAIN VALVE CAP INCLUDED)
16
DRAIN CONNECTOR
17
DRAIN VALVE CAP
18
POOL COVER
19
STRAINER HOLE PLUG
20
STRAINER CONNECTOR
21
STRAINER GRID
22
HOSE
23
HOSE CLAMP
24
HOSE T-JOINT
25
POOL INLET NOZZLE
26
HOSE O-RING
27
PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)
28
STEP WASHER
29
STRAINER NUT
30
FLAT STRAINER RUBBER WASHER
31
THREADED STRAINER CONNECTOR
32
ADJUSTABLE POOL INLET NOZZLE
33
SPLIT HOSE PLUNGER VALVE
157-1/2”x78-3/4”
15’ x 9’
18’ x 9’
24’ x 12’
32’ x 16’
(400cmx200cm) (457cmx274cm) (549cm x 274cm) (732cm x 366cm) (975cm x 488cm)
8
2
4
2
2
8
2
4
2
2
8
2
4
2
2
2
4
24
24
12
12
12
2
4
24
24
12
12
12
1
1
1
2
1
2
2
2
2
4
1
1
1
1
1
1
1
1
1
1
2
3
3
2
2
8
1
1
SAVE THESE INSTRUCTIONS
2
4
24
24
12
12
12
1
1
1
2
1
2
2
2
2
4
14
2
8
2
2
2
2
4
36
36
18
18
18
1
1
1
2
1
2
2
2
2
4
20
2
12
2
2
4
2
4
48
48
24
24
24
1
1
1
2
1
2
2
2
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Page 5
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
REF.
NO.
DESCRIPTION
157-1/2”x78-3/4”x39-3/8” 15’ x 9’ x 48’’ (457cm 18’ x 9’ x 52’’ (549cm 24’ x 12’ x 52’’ (732cm 32' x 16' x 52'' (975cm
(400cm x 200cm x 100cm) x 274cm x 122cm) x 274cm x 132cm) x 366cm x 132cm) x 488cm x 132cm)
SPARE PART NO.
1
SINGLE BUTTON SPRING
11664
10381
10381
10381
10381
2
HORIZONTAL BEAM (A) (SINGLE BUTTON SPRING INCLUDED)
11665
11524
10919
10920
10921
3
HORIZONTAL BEAM (B) (SINGLE BUTTON SPRING INCLUDED)
11666
11525
10922
10923
10924
4
HORIZONTAL BEAM (C)
11667
11526
10925
10926
10927
5
HORIZONTAL BEAM (D) (SINGLE BUTTON SPRING INCLUDED)
11668
10928
10928
10929
10928
6
HORIZONTAL BEAM (E) (SINGLE BUTTON SPRING INCLUDED)
10930
10931
7
HORIZONTAL BEAM (F)
11669
10932
10932
10933
10932
8
CORNER JOINT
11670
10934
10934
10934
10934
9
U-SUPPORT END CAP
11663
10935
10935
10935
10935
10
DOUBLE BUTTON SPRING CLIP
10382
10936
10936
10936
10936
11
U-SHAPED SIDE SUPPORT (U-SUPPORT END CAP & DOUBLE BUTTON SPRING CLIP INCLUDED)
11671
11523
10937
10937
10937
12
CONNECTING ROD
10383
10383
10383
10383
10383
13
RESTRAINER STRAP
11981
10938
10938
10938
10938
14
GROUND CLOTH
11521
10759
18941
10760
15
POOL LINER (DRAIN VALVE CAP INCLUDED)
11982EH
11520EH
10939EH
10940EH
10941EH
16
DRAIN CONNECTOR
10184
10184
10184
10184
10184
17
DRAIN VALVE CAP
11044
11044
11044
11044
11044
18
POOL COVER
11522
10756
18936
10757
19
STRAINER HOLE PLUG
10127
10127
10127
10127
10127
20
STRAINER CONNECTOR
11070
11070
11070
11070
11070
21
STRAINER GRID
11072
11072
11072
11072
11072
22
HOSE
11873
11873
11873
11873
11873
23
HOSE CLAMP
11489
10122
10122
10122
10122
24
HOSE T-JOINT
11871
25
POOL INLET NOZZLE
11071
26
HOSE O-RING
10262
10262
10262
10262
27
PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)
10747
10747
10747
10747
28
STEP WASHER
10745
10745
10745
10745
29
STRAINER NUT
10256
10256
10256
10256
30
FLAT STRAINER RUBBER WASHER
10255
10255
10255
10255
31
THREADED STRAINER CONNECTOR
11235
11235
11235
11235
32
ADJUSTABLE POOL INLET NOZZLE
11074
11074
11074
11074
33
SPLIT HOSE PLUNGER VALVE
11872
11872
11872
11872
SAVE THESE INSTRUCTIONS
Page 6
119
PO
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
1
Non-USA & Canada:
16
17
3
2
4
8
15
5
6
14
7
18
19
9
11
12
10
13
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
REF.
NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
SINGLE BUTTON SPRING
HORIZONTAL BEAM (A) (SINGLE BUTTON SPRING INCLUDED)
HORIZONTAL BEAM (B) (SINGLE BUTTON SPRING INCLUDED)
HORIZONTAL BEAM (C)
HORIZONTAL BEAM (D) (SINGLE BUTTON SPRING INCLUDED)
HORIZONTAL BEAM (E) (SINGLE BUTTON SPRING INCLUDED)
HORIZONTAL BEAM (F)
CORNER JOINT
U-SUPPORT END CAP
DOUBLE BUTTON SPRING CLIP
U-SHAPED SIDE SUPPORT (U-SUPPORT END CAP & DOUBLE BUTTON SPRING CLIP INCLUDED)
CONNECTING ROD
RESTRAINER STRAP
GROUND CLOTH
POOL LINER (DRAIN VALVE CAP INCLUDED)
DRAIN CONNECTOR
DRAIN VALVE CAP
POOL COVER
STRAINER HOLE PLUG
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
POOL SIZE & QUANTITIES
157-1/2”x78-3/4”
15’ x 9’
18’ x 9’
24’ x 12’
32’ x 16’
(400cmx200cm) (457cmx274cm) (549cm x 274cm) (732cm x 366cm) (975cm x 488cm)
8
2
4
2
2
8
2
4
2
2
8
2
4
2
2
2
4
24
24
12
12
12
2
4
24
24
12
12
12
1
1
1
2
1
2
4
24
24
12
12
12
1
1
1
2
1
1
1
2
3
14
2
8
2
2
2
2
4
36
36
18
18
18
1
1
1
2
1
20
2
12
2
2
4
2
4
48
48
24
24
24
1
1
1
2
1
157-1/2”x78-3/4”x39-3/8” 15’ x 9’ x 48’’ (457cm 18’ x 9’ x 52’’ (549cm 24’ x 12’ x 52’’ (732cm 32' x 16' x 52'' (975cm
(400cm x 200cm x 100cm) x 274cm x 122cm) x 274cm x 132cm) x 366cm x 132cm) x 488cm x 132cm)
DESCRIPTION
SPARE PART NO.
SINGLE BUTTON SPRING
11664
10381
10381
10381
10381
HORIZONTAL BEAM (A) (SINGLE BUTTON SPRING INCLUDED)
11665
11524
10919
10920
10921
HORIZONTAL BEAM (B) (SINGLE BUTTON SPRING INCLUDED)
11666
11525
10922
10923
10924
HORIZONTAL BEAM (C)
11667
11526
10925
10926
10927
HORIZONTAL BEAM (D) (SINGLE BUTTON SPRING INCLUDED)
11668
10928
10928
10929
10928
HORIZONTAL BEAM (E) (SINGLE BUTTON SPRING INCLUDED)
10930
10931
HORIZONTAL BEAM (F)
11669
10932
10932
10933
10932
CORNER JOINT
11670
10934
10934
10934
10934
U-SUPPORT END CAP
11663
10935
10935
10935
10935
DOUBLE BUTTON SPRING CLIP
10382
10936
10936
10936
10936
U-SHAPED SIDE SUPPORT (U-SUPPORT END CAP & DOUBLE BUTTON SPRING CLIP INCLUDED)
11671
11523
10937
10937
10937
CONNECTING ROD
10383
10383
10383
10383
10383
RESTRAINER STRAP
11981
10938
10938
10938
10938
GROUND CLOTH
11521
10759
18941
10760
POOL LINER (DRAIN VALVE CAP INCLUDED)
11982
11520
10939
10940
10941
DRAIN CONNECTOR
10184
10184
10184
10184
10184
DRAIN VALVE CAP
11044
11044
11044
11044
11044
POOL COVER
11522
10756
18936
10757
STRAINER HOLE PLUG
10127
SAVE THESE INSTRUCTIONS
Page 7
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
119
PO
English
POOL SETUP
IMPORTANT SITE SELECTION AND GROUND
PREPARATION INFORMATION
WARNING
• The pool location must allow you to secure all doors, windows, and safety barriers to prevent unauthorized, unintentional or unsupervised pool entry.
• Install a safety barrier that will eliminate access to the pool for young children and pets.
• Failure to set up the pool on flat, level, compact ground and to assemble and fill with water in accordance with the following instructions could result in the pool’s collapse or the
possibility that a person lounging in the pool could be swept out/ejected, resulting in serious injury or property damage.
• Risk of electric shock: connect the filter pump only to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI). To reduce the risk of an electrical shock, do not
use extension cords, timers, plug adapters or converter plugs to connect the pump to an
electrical supply. Always provide a properly located outlet. Locate the cord where it cannot
be damaged by lawn mowers, hedge trimmers, and other equipment. See the filter pump
manual for additional warnings and instructions.
• Risk of serious injury: do not attempt to assemble pool in high wind conditions.
Select an outdoor location for the pool with the following requirements in mind:
1.
2.
3.
4.
5.
6. 7.
The area where the pool is to be set up must be absolutely flat and level. Do not set up the pool on a
slope or inclined surface.
The ground surface must be compacted and firm enough to withstand the pressure and weight of a
fully set up pool. Do Not set up the pool on mud, sand, soft or loose soil conditions.
Do Not set up the pool on a deck, balcony or platform.
The pool requires at least 5 - 6 feet (1.5 - 2.0 m) of space all around pool from objects that a child
could climb on to gain access to the pool.
The chlorinated poolwater could damage the surrounding vegetation.
If the ground is not concrete (i.e., if it is asphalt, lawn or earth) you must place a piece of
pressure-treated wood, size 15” x 15” x 1.2” (38 x 38 x 3cm), under each U-shaped support and flush
with the ground. Alternatively you may use steel pads or reinforced tiles. Consult your local pool supply retailer for advice on support pads.
Above ground storable pools shall be located at a minimum distance of 6 ft (1.83 meters) from any
receptacle, and that all 125-volt 15- and 20-ampere receptacles located within 20 ft (6.0 meters) of the pool shall be protected by a ground fault circuit interrupter (GFCI), where distances are by measuring
the shortest path the supply cord of an appliance connected to the receptacle would follow without piercing a floor, wall, ceiling, doorway with hinged or sliding door, window opening, or other effective permanent barrier.
8. Eliminate all aggressive grasses first. Certain types of grass such as St. Augustine and Bermuda, may
grow through the liner. Grass growing through the liner it is not a manufacture defect and is not
covered under warranty.
SAVE THESE INSTRUCTIONS
Page 8
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
POOL SETUP (continued)
You may have purchased this pool with the Intex Krystal Clear™ filter pump. The pump has its
own separate set of installation instructions. First assemble your pool unit and then set up the
filter pump.
Estimated assembly time 60~90 minutes. (Note the assembly time is only approximate and
individual assembly experience may vary.)
•
•
Find a flat, level location that is free and clear of stones, branches or other sharp objects that may
puncture the pool liner or cause injury.
Open the carton containing the liner, joints, legs, etc., very carefully as this carton can be used to store
the pool during the winter months or when not in use.
•
Remove the ground cloth (14) from carton. Spread it
1
5 - 6' (1.5 - 2.0 m)
out completely with its edges being at least 5 - 6’
(1.5 - 2.0 m) from any obstacle such as walls, fences,
trees, etc. Remove the liner (15) from carton and
LINER
spread it out over the ground cloth with the drain valve
5 - 6'
towards the draining area. Place the drain valve away
5 - 6'
(1.5 - 2.0 m)
(1.5 - 2.0 m)
from the house. Open it up to warm it in the sun. This
ELECTRICAL SOURCE
warming will make installation easier. Make sure the
liner is centered atop the ground cloth. Be sure to face
the end with the 2 hose connectors towards the electrical power source.
IMPORTANT: Do not drag the liner across the ground as this can cause liner damage and pool
leakage (see drawing 1).
• During the set-up of this pool liner, point the hose connections or openings in the direction of the electric
power source. The outer edge of the assembled pool is to be within reach of the electrical connection for
the optional filter pump.
2.Remove all the parts from the carton(s) and place them
on the ground in the location where they are to be
assembled. Check the parts listing and be sure all the
pieces to be assembled are accounted for (see
drawings 2.1, 2.2 & 2.3).
IMPORTANT: Do not start assembly if any pieces
are missing. For replacement pieces call the
Consumer Service telephone number in your area.
After all pieces are accounted for move the pieces away
from the liner for of installation.
2.1
CORNER JOINT
CORNER JOINT
(A)
(B)
(B)
(C)
(F)
(D)
LINER
(D)
(C)
(B)
(B)
(F)
(A)
CORNER JOINT
CORNER JOINT
157-1/2”x78-3/4”x39-3/8” /15’ X 9’ / 18’ X 9’
2.2
CORNER
JOINT
(F)
(A) (B) (B) (B) (B) (C)
(D)
(E)
CORNER
JOINT
(D)
(C) (B)
LINER
(B) (B) (B) (A)
24’ X 12’
SAVE THESE INSTRUCTIONS
CORNER
JOINT
(E)
(F)
CORNER
JOINT
Page 9
119
PO
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
POOL SETUP (continued)
CORNER
JOINT
(F)
(A)
(B)
(B)
(B)
(B)
(B)
(C)
(B)
(E)
(E)
LINER
(E)
(D)
CORNER
JOINT
3.
(D)
2.3
CORNER
JOINT
(B)
(C)
(B)
(B)
(B)
(E)
(B)
(B)
(A)
(F)
CORNER
JOINT
32’ X 16’
Be sure the liner is opened and spread out to its fullest
3
extent on top of the ground cloth. Starting with one side,
slide the “A” beams first into the sleeve openings located in
each corner. Continue with “B” beam snapping into the “A”
(A)
(B)
(B)
beam, and another “C” beam snapping into the “B” beam
(C)
(see drawing 3).
Keep the metal beam holes aligned with the white liner
sleeve holes.
Continue inserting all “A-B-C & D-E-F” beams into the sleeve
openings. Start the "D-E-F" combination for pool's short sides
by inserting the "D" beam first into the opening. The combinations for beams are different for different sizes of pools, see the chart below for detail. (Be
sure all 4 sides end up with the metal beam holes aligned with the white liner sleeve holes.)
Size of Pool
No. of “U-shape” Leg
on longer side
157-1/2”x78-3/4” (400 cm x 200cm)
4
2
A-B-B-C
D-F
15’ x 9’ (457 cm x 274 cm)
4
2
A-B-B-C
D-F
18’ x 9’ (549 cm x 274 cm)
4
2
A-B-B-C
D-F
24’ x 12’ (732 cm x 366 cm)
6
3
A-B-B-B-B-C
D-E-F
32’ x 16’ (975 cm x 488 cm)
8
4
A-B-B-B-B-B-B-C
D-E-E-F
4.
No. of “U-shape” Leg
Horizontal Beam
Horizontal Beam
Combinations on longer side Combinations on shorter side
on shorter side
Slide the restrainer strap (13) onto the large U-shaped side
support (11). Repeat for all restrainer straps and U-supports.
IMPORTANT: The liner is to remain flat on the ground
during the next step #5. This is why 5 - 6’ of clearance
space around the pool is necessary (see drawing 4).
9
13
4
10
11
SAVE THESE INSTRUCTIONS
Page 10
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
POOL SETUP (continued)
5. The tops of the U-shaped side supports have a double
button spring loaded clip (10) that is factory pre-installed.
Insert the side supports into the “A-B-C & D-E-F” beam
holes by squeezing the bottom button inward with your
fingers.
Squeezing this bottom button will allow the support to enter
the beam. Once the U-support is inside the beam release
the finger pressure allowing the support to “SNAP” into
place. Repeat this procedure for all U-shaped side supports
(see drawing 5).
6.
5
10
13
11
With one person standing inside the pool, raise one corner;
insert the connecting rod (12) into the overlapping
openings, to connect the liner straps to the restrainer
straps. Repeat the operation in the other corners and then
on the sides (see drawings 6.1 & 6.2).
6.1
LINER
6.2
LINER
12
7. Pull the bottoms of the side supports out away from the
liner to make the straps taut. Repeat for all locations (see
drawing 7).
7
12
8.
If the ground is not concrete (asphalt, lawn or earth) you
must place a piece of pressure-treated wood, size
15” x 15” x 1.2”, under each leg and flush with the ground.
The U-shaped side supports must be placed in the center
of the pressure-treated wood and with the wood grain
perpendicular to the support leg (see drawing 8).
SAVE THESE INSTRUCTIONS
8
Level
Page 11
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
POOL SETUP (continued)
9.
10.
9
Position the long wall top rails so they are leaning over the
short wall top rails. Installe the corner joints (8) at the 4
corners (see drawing 9).
IMPORTANT: The four corner joints are designed to be
moveable relative to the horizontal beams and not fixed
to the horizontal beams. This allows the pool side walls
to move inward or outward when the pool is in use.
8
Assemble the ladder. The ladder has separate assembly instructions in the ladder box.
11. Place the assembled ladder over one of the sides with one of the liner installation team members
entering the pool to smooth out all bottom liner wrinkles. While inside the pool this team member
should check the 2 drain valves (in corners) to be sure the inside drain plug is inserted into the valve.
This team member should push each inside corner in an outward direction.
12. Before filling the pool with water, ensure that the drain plug inside the pool is closed and that the drain
cap on the outside is screwed on tightly. Fill the pool with no more than 1 inch (2.5 cm) of water. Check
to see whether the water is level.
IMPORTANT: If the water in the pool flows to one side, the pool is not completely level. Setting
up the pool on unleveled ground will cause the pool to tilt resulting in the sidewall material to
bulge. If the pool is not completely level, you must drain the pool, level the area and re-fill the
pool.
Smooth out the remaining wrinkles (from inside pool) by pushing out where the pool floor and pool
sides meet. Or (from outside pool) reach under the side of the pool, grasp the pool floor and pull it out.
If the ground cloth is causing the wrinkles, have 2 people pull from either side to remove all wrinkles.
13.
Fill the pool with water up to just below the sleeve line.
(see drawing 10).
NOTE: The pool side walls and frame structure will lean inward after having been filled with water to the
recommended level. Do not be concerned by the inward
leaning of the side walls, this is to accommodate the water
movement and pressure when the pool is in use.
10
WATER LEVEL
14. Posting aquatic safety signs
Select a highly visible area near the pool to post the Danger
No Diving or Jumping sign included later in this manual.
IMPORTANT
Before allowing anyone to use the pool, hold a family meeting. Establish a set of rules that
include, at a minimum, the important safety rules and general aquatic safety information in
this manual. Review these rules on a regular basis and with all users of the pool, including
guests.
SAVE THESE INSTRUCTIONS
Page 12
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
POOL MAINTENANCE & CHEMICALS
WARNING
REMEMBER TO
• Protect all pool occupants from possible water-related illnesses by keeping the pool water clean and sanitized. Do not swallow the pool water. Always practice good hygiene.
• Keep your pool clean and clear. The pool floor must be visible at all times from the outside barrier of the pool.
• Keep children away from pool covers to avoid entanglement, drowning, or other serious
injury.
Water maintenance
The maintenance of a proper water balance through appropriate use of sanitizers is the single most
important factor in maximizing the life and appearance of the liner as well as ensuring clean, healthy
and safe water. Proper technique is important for water testing and treating the pool water. See your
pool professional for chemical, test kits and testing procedures. Be sure to read and follow the
written instructions from the chemical manufacturer.
1. Never let chlorine come into contact with the liner if it is not completely dissolved. Dissolve granular or
tablet chlorine first in a bucket of water, then add it to the pool water. Likewise with liquid chlorine; mix it
immediately and thoroughly with the pool water.
2. Never mix chemicals together. Add the chemicals to the pool water separately. Thoroughly dissolve each
chemical before adding another one to the water.
3. An Intex pool skimmer and an Intex pool vacuum are available to assist in maintaining clean pool water.
See your pool dealer for these pool accessories.
4. Do not use a pressure washer to clean the pool.
TROUBLESHOOTING
PROBLEM
CAUSE
DESCRIPTION
ALGAE
•
•
•
COLORED
WATER
Greenish water.
Green or black spots
on pool liner.
Pool liner is slippery
and/or has a bad odor.
SOLUTION
• Chlorine and pH level
need adjustment.
•
•
•
Super chlorinate with shock
treatment. Correct pH to your
pool store's recommended level.
Vacuum pool bottom.
Maintain proper chlorine level.
• Water turns blue, brown, or black when first treated with
chlorine.
•
Copper, iron or
manganese in water
being oxidized by the
added chlorine.
•
•
•
Adjust pH to recommended
level.
Run filter until water is clear.
Replace cartridge frequently.
FLOATING
MATTER IN
WATER
• Water is cloudy or milky.
•
•
•
"Hard water" caused by a too high pH level.
Chlorine content is low.
Foreign matter in water.
• Correct the pH level. Check with your pool dealer for advice.
• Check for proper chlorine level.
• Clean or replace your filter
cartridge.
CHRONIC LOW
WATER LEVEL
• Level is lower than
on previous day.
• Rip or hole in pool liner or hoses.
• Repair with patch kit.
• Finger tighten all caps.
• Replace the hoses.
SEDIMENT ON
POOL BOTTOM
• Dirt or sand on pool
floor.
• Heavy use, getting in and out of pool.
• Use Intex pool vacuum to
clean bottom of pool.
SURFACE DEBRIS
• Leaves, insects etc.
• Pool too close to trees.
• Use Intex pool skimmer.
SAVE THESE INSTRUCTIONS
Page 13
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
POOL MAINTENANCE & DRAINAGE
CAUTION
ALWAYS FOLLOW THE CHEMICAL MANUFACTURER'S
DIRECTIONS, AND THE HEALTH AND HAZARD WARNINGS.
Do not add chemicals if the pool is occupied. This can cause skin or eye irritation. Concentrated
chlorine solutions can damage the pool liner. In no event is Intex Recreation Corp., Intex Development
Co. Ltd., their related companies, authorized agents and service centers, retailers or employees liable to
the buyer or any other party for costs associated with the loss of pool water, chemicals or water damage.
Keep spare filter cartridges on hand. Replace cartridges every two weeks. We recommend the use
of a Krystal Clear™ Intex Filter Pump with all of our above-ground-pools. To purchase an Intex Filter
Pump or other accessories see your local retailer, visit our website or call the Intex Consumer
Services Department listed in the separate "Authorized Service Centers" sheet and have your Visa
or Mastercard ready.
EXCESSIVE RAIN: To avoid damage to the pool and over filling, immediately drain rain water that
causes the water level to be higher than the maximum.
How to Drain Your Pool and Long Term Storage
NOTE: This pool has drain valves installed in 2 corners. Connect the garden hose to the corner valve that
directs the water to the appropriate location.
1. Check local regulations for specific directions regarding disposal of swimming pool water.
2. Check to make sure that the drain plug inside the pool is plugged in place.
3. Remove the cap from the drain valve on the outside pool wall.
4. Attach the female end of the garden hose to the drain connector (16).
5. Place the other end of the hose in an area where the water can be safely drained away from the house
and other nearby structures.
6. Attach the drain connector to the drain valve. NOTE: The drain connector will push the drain plug
open inside the pool and water will start to drain immediately.
7. When the water stops draining, start lifting the pool from the side opposite the drain, leading any remaining water to the drain and emptying the pool completely.
8. Disconnect hose and adapter when finished.
9. Re-insert drain plug in drain valve on inside of pool for storage.
10.Replace drain cap on outside of pool.
11.Reverse the set-up instructions to disassemble the pool, and remove all connecting parts.
12.Be sure that the pool and all parts are completely dry before storage. Air dry the liner in the sun until
completely dry before folding (see drawing 11). Sprinkle some talcum powder to prevent vinyl from
sticking together and to absorb any residual moisture.
13.Create rectangular shape. Starting at one side, fold one-sixth of liner in on itself twice. Do the same on the opposite side (see drawings 12.1 & 12.2).
14.Once you have created two opposing folded sides, simply fold one over the other like closing a book (see drawings 13.1 & 13.2).
15.Fold the two long ends to the middle (see drawing 14).
16.Fold one over the other like closing a book and finally compact the liner (see drawing 15).
17.Store the liner and accessories in a dry, temperature controlled, between 32 degrees Fahrenheit
(0 degrees Celsius) and 104 degrees Fahrenheit (40 degrees Celsius), storage location.
18.The original packing can be used for storage.
11
12.1
12.2
13.1
13.2
14
SAVE THESE INSTRUCTIONS
15
Page 14
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
WINTER PREPARATIONS
Winterizing your Above Ground Pool
After usage, you can easily empty and store away your pool in a safe place. You
must drain, disassemble and properly store the pool when the temperature drops
below 41 degrees Fahrenheit (5 degrees Celsius) to prevent ice damage to the pool
and related components. Ice damage can result in sudden liner failure or pool
collapse. Also see the section ‘’How To Drain Your Pool’’.
Should temperatures in your area not drop below 41 degrees Fahrenheit (5 degrees
Celsius), and you choose to leave your pool out, prepare it as follows:
1. Clean the pool water thoroughly. If the type is an Easy Set Pool or an Oval Frame Pool, make sure that the top ring is properly inflated.
2. Remove the skimmer (if applicable) or any accessories attached to the threaded
strainer connector. Replace strainer grid if necessary. Be sure all accessories parts are clean and completely dry before storage.
3. Plug the Inlet and Outlet fitting from the inside of the pool with the plug provided
(sizes 16' and below). Close the Inlet and Outlet Plunger Valve (sizes 17' and above).
4. Remove the ladder (if applicable) and store in a safe place. Be sure the ladder is
completely dry before storage.
5. Remove the hoses that connect the pump and filter to the pool.
6. Add the appropriate chemicals for the winter period. Consult your local pool dealer as to which chemicals you should use and how to use them. This can vary greatly by region.
7. Cover pool with Intex Pool Cover. IMPORTANT NOTE: INTEX POOL COVER IS NOT A SAFETY COVER.
8. Clean and drain the pump, filter housing and hoses. Remove and discard the old filter cartridge. Keep a spare cartridge for the next season.
9. Bring pump and filter parts indoors and store in a safe and dry area, preferably between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit
(40 degrees Celsius).
SAVE THESE INSTRUCTIONS
Page 15
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
119
PO
English
GENERAL AQUATIC SAFETY
Water recreation is both fun and therapeutic. However, it involves inherent risks of
injury and death. To reduce your risk of injury, read and follow all product, package
and package insert warnings and instructions. Remember, however, that product
warnings, instructions and safety guidelines cover some common risks of water
recreation, but do not cover all risks and dangers.
For additional safeguards, also familiarize yourself with the following general
guidelines as well as guidelines provided by nationally recognized Safety
Organizations:
• Demand constant supervision. A competent adult should be appointed as a “lifeguard” or water watcher, especially when children are in and around the pool.
• Learn to swim.
• Take the time to learn CPR and first aid.
• Instruct anyone who is supervising pool users about potential pool hazards and about the use of protective devices such as locked doors, barriers, etc. • Instruct all pool users, including children what to do in case of an emergency.
• Always use common sense and good judgement when enjoying any water activity.
• Supervise, supervise, supervise.
For additional information on safety, please visit
• The Association of Pool and Spa Professionals: The Sensible Way to Enjoy Your Aboveground/Onground Swimming Pool www.nspi.org
• American Academy of Pediatrics: Pool Safety for Children www.aap.org
• Red Cross www.redcross.org
• Safe Kids www.safekids.org
• Home Safety Council: Safety Guide www.homesafetycouncil.org
• Toy Industry Association: Toy Safety www.toy-tia.org
SAFETY IN YOUR POOL
Safe swimming depends on constant attention to the rules. The "NO DIVING" sign within
this manual can be posted near your pool to help keep everyone alert to the danger. You
may also wish to copy and laminate the sign for protection from the elements.
SAVE THESE INSTRUCTIONS
Page 16
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
119
PO
LIMITED WARRANTY
Your Intex Pool has been manufactured using the highest quality materials and
workmanship. All Intex products have been inspected and found free of defects prior to
leaving the factory. This Limited Warranty applies to the Intex Pool only.
The provisions of this Limited Warranty apply only to the original purchaser and is not
transferable. This Limited Warranty is valid for a period of 90 days from the date of the
initial retail purchase. Keep your original sales receipt with this manual, as proof of
purchase will be required and must accompany warranty claims or the Limited Warranty is
invalid.
If a manufacturing defect is found within this 90-day period, please contact the appropriate
Intex Service Center listed in the separate “Authorized Service Centers” sheet. The Service
Center will determine the validity of the claim. If the Service Center directs you to return the
product, please carefully package the product and send with shipping and insurance
prepaid to the Service Center. Upon receipt of the returned product, the Intex Service
Center will inspect the item and determine the validity of the claim. If the provisions of this
warranty cover the item, the item will be repaired or replaced at no charge.
Any and all disputes regarding the provisions of this Limited Warranty shall be brought
before an informal dispute settlement board and unless and until the provisions of these
paragraphs are carried forth, no civil action may be instituted. The methods and procedures
of this settlement board shall be subject to the rules and regulations set forth by the Federal
Trade Commission (F.T.C.). IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF
THIS WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR
EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR
CONSEQUENTIAL DAMAGES OR LIABILITIES. Some states, or jurisdictions do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This Limited Warranty does not apply if the Intex product is subject to negligence,
abnormal use or operation, accident, improper operation, improper maintenance or storage,
or to damage by circumstances beyond Intex’s control, including but not limited to,
punctures, tears, abrasions, ordinary wear and tear and damage caused by exposure to
fire, flood, freezing, rain, or other external environmental forces. This Limited Warranty
applies only to those parts and components sold by Intex. The Limited Warranty does not
cover unauthorized alterations, repairs or disassembly by anyone other than Intex Service
Center personnel.
DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN
OR REPLACEMENT. IF YOU ARE MISSING PARTS OR NEED
ASSISTANCE, PLEASE CALL US TOLL-FREE (FOR U.S. AND
CANADIAN RESIDENTS): 1-800-234-6839 OR VISIT OUR WEBSITE:
WWW.INTEXSTORE.COM.
Proof of Purchase must accompany all returns or the warranty claim will be invalid.
SAVE THESE INSTRUCTIONS
Page 17
SAVE THESE INSTRUCTIONS
TO AVOID SERIOUS INJURY ALL POOL USERS MUST KNOW AND FOLLOW THESE SAFETY RULES.
• No glass in pool area.
• No running, jumping, or horseplay in or around pool.
• Be familiar with the pool before swimming.
• Don’t swim when using alcohol or drugs.
• Children must be accompanied by an adult.
• Be Safe. Swim with a friend.
DIVING MAY RESULT IN PERMANENT INJURY OR DEATH
NO DIVING OR JUMPING
SHALLOW WATER
! WARNING
(119PO) RECTANGULAR ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
POST THIS WARNING NEAR YOUR POOL
Page 18
119
PO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising