Delay Time for Dial-Now Rule
Delay Time for Dial-Now Rule
Copyright © 2014 YEALINK NETWORK TECHNOLOGY CO., LTD.
Copyright © 2014 Yealink Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, photocopying, recording, or otherwise, for any purpose, without the express written
permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes
translating into another language or format.
When this publication is made available on media, Yealink Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private
use but not for redistribution. No parts of this publication may be subject to alteration,
modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any
damages arising from use of an illegally modified or altered publication.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.
YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this guide.
Hereby, Yealink Network Technology CO ., LTD. declares that this phone is in conformity
with the essential requirements and other relevant provisions of the CE, FCC.
This device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Note: This device is tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experience radio/TV technician for help.
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
We are striving to improve our documentation quality and we appreciate your feedback. Email
your opinions and comments to DocsFeedback@yealink.com.
Yealink SIP-T46G IP phone firmware contains third-party software under the GNU General Public License
(GPL). Yealink uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms
and conditions of the license.
The original GPL license, source code of components licensed under GPL and used in Yealink products can
be downloaded online:
http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293.
About This Guide
Thank you for choosing the SIP-T46G IP Phone, an ultra-elegant gigabit IP Phone which is
exquisitely designed to provide business telephony features, such as Call Hold, Call
Transfer, Busy Lamp Field, Multicast Paging and Conference over an IP network.
This guide provides everything you need to quickly use your new phone. First, verify
with your system administrator that the IP network is ready for phone configuration. Also
be sure to read the Packaging Contents and Regulatory Notices sections in this guide
before you set up and use the SIP-T46G IP phone.
If this is your first time using the SIP-T46G IP phone, we recommend that you first refer to
the Quick Installation Guide and Quick Reference Guide, available online:
http://www.yealink.com/SupportDownloadfiles_detail.aspx?CateId=310&flag=142.
Note
Shared Line, Busy Lamp Field List, Network Directory and Network Call Log features are
hidden for IP phones in neutral firmware version, which are designed for BroadWorks
environment. Please contact your system administrator for more information.
Topics provided in this guide include:

Chapter 1
Overview

Chapter 2
Getting Started

Chapter 3
Customizing Your Phone

Chapter 4 Basic Call Features

Chapter 5
Advanced Phone Features
This section describes the changes to this guide for each release and guide version.
Major updates have occurred to the following sections:

Documentations on page 8

Packaging Contents on page 9
ix
User Guide for the SIP-T46G IP Phone
Major updates have occurred to the following sections:

LED Instructions on page 4

Backlight on page 20

Contrast on page 21

Anonymous Call on page 116
Major updates have occurred to the following sections:

Line Keys on page 60

Hot Desking on page 123

Troubleshooting on page 143

Appendix A - Time Zones on page 155
Major updates have occurred to the following sections:
x

Bluetooth Headset on page 55

Remote Phone Book on page 49

Line Keys on page 60

Anonymous Call on page 116

Troubleshooting on page 143

Appendix A - Time Zones on page 155
Table of Contents
About This Guide .................................................................. ix
In This Guide.................................................................................................................... ix
Summary of Changes ..................................................................................................... ix
Changes for Release 72, Guide Version 72.2 ............................................................. ix
Changes for Release 72, Guide Version 72.1 .............................................................. x
Changes for Release 71, Guide Version 71.180 .......................................................... x
Changes for Release 71, Guide Version 71.150 .......................................................... x
Table of Contents.................................................................. xi
Overview ..............................................................................1
Hardware Component Instructions................................................................................. 1
Icon Instructions................................................................................................................ 3
LED Instructions ................................................................................................................ 4
User Interfaces ................................................................................................................. 6
Phone User Interface .................................................................................................... 6
Web User Interface ....................................................................................................... 6
Documentations ............................................................................................................... 8
Getting Started .....................................................................9
Packaging Contents......................................................................................................... 9
Phone Installation........................................................................................................... 11
Phone Initialization ......................................................................................................... 13
Phone Status................................................................................................................... 14
Basic Network Settings .................................................................................................. 15
Registration .................................................................................................................... 17
Idle Screen ..................................................................................................................... 17
Customizing Your Phone....................................................... 19
General Settings ............................................................................................................ 19
Wallpaper.................................................................................................................... 19
Backlight...................................................................................................................... 20
Contrast ....................................................................................................................... 21
Language .................................................................................................................... 22
Time & Date................................................................................................................. 23
xi
User Guide for the SIP-T46G IP Phone
Administrator Password ............................................................................................. 25
Key as Send ................................................................................................................ 26
Keypad Lock ............................................................................................................... 27
Audio Settings ................................................................................................................ 30
Volume ......................................................................................................................... 30
Ring Tones ................................................................................................................... 31
Contact Management ................................................................................................... 33
Directory ...................................................................................................................... 33
Local Directory ............................................................................................................ 35
Blacklist........................................................................................................................ 47
Remote Phone Book ................................................................................................... 49
Call History Management ............................................................................................. 51
System Customizations .................................................................................................. 53
Headset Use ............................................................................................................... 53
Bluetooth Headset ...................................................................................................... 55
DSS Keys ..................................................................................................................... 60
Account Management ............................................................................................... 71
Dial Plan ...................................................................................................................... 73
Emergency Number.................................................................................................... 79
Live Dialpad ................................................................................................................ 80
Hotline ......................................................................................................................... 81
Basic Call Features .............................................................. 83
Placing Calls................................................................................................................... 83
Answering Calls ............................................................................................................. 85
Ending Calls ................................................................................................................... 87
Redialing Numbers ........................................................................................................ 87
Recent Call In Dialing .................................................................................................... 87
Auto Answer ................................................................................................................... 88
Auto Redial ..................................................................................................................... 89
Call Completion ............................................................................................................. 91
Call Return ...................................................................................................................... 92
Call Mute ........................................................................................................................ 93
Call Hold/Resume .......................................................................................................... 93
Do Not Disturb (DND) .................................................................................................... 94
Call Forward................................................................................................................... 98
Call Transfer ................................................................................................................. 105
Call Waiting .................................................................................................................. 107
Conference................................................................................................................... 107
Local Conference ...................................................................................................... 107
Network Conference ................................................................................................ 109
Call Park ....................................................................................................................... 110
Call Pickup.................................................................................................................... 111
Anonymous Call ........................................................................................................... 116
xii
Table of Contents
Anonymous Call Rejection ........................................................................................... 117
Advanced Phone Features ................................................ 119
Busy Lamp Field (BLF).................................................................................................. 119
Call Recording.............................................................................................................. 121
Hot Desking .................................................................................................................. 123
Intercom........................................................................................................................ 125
Outgoing Intercom Calls .......................................................................................... 125
Incoming Intercom Calls ........................................................................................... 126
Multicast Paging .......................................................................................................... 128
Sending RTP Stream ................................................................................................. 128
Receiving RTP Stream ............................................................................................... 130
Music on Hold .............................................................................................................. 131
Automatic Call Distribution (ACD) .............................................................................. 132
Messages ..................................................................................................................... 134
Short Message Service (SMS) ................................................................................. 134
Voice Mail.................................................................................................................. 137
Message Waiting Indicator (MWI) .......................................................................... 138
Troubleshooting ................................................................. 143
Regulatory Notices ............................................................ 153
Service Agreements .................................................................................................... 153
Limitations of Liability................................................................................................... 153
Safety Instructions ........................................................................................................ 153
Appendix A - Time Zones .................................................. 155
Index ................................................................................. 157
xiii
User Guide for the SIP-T46G IP Phone
xiv
Overview
This chapter provides the overview of the SIP-T46G IP phone. Topics include:

Hardware Component Instructions

Icon Instructions

LED Instructions

User Interfaces

Documentations
If you require additional information or assistance with your new phone, contact your
system administrator.
The main hardware components of the SIP-T46G IP phone are the LCD screen and the
keypad.
1
User Guide for the SIP-T46G IP Phone
Hardware component instructions of the SIP-T46G IP phone are:
Item
Description
Shows information about calls, messages, soft keys,
time, date and other relevant data:
• Call information—caller ID, call duration
①
LCD Screen
• Icons (for example,
)
• Missed call text or second incoming caller information
• Prompt text (for example, "Saving config file!")
• Time and date
②
Power Indicator LED
③
Line Keys
Indicates phone power and some feature statuses.
Use these keys to activate up to six accounts and assign
various features.
HEADSET Key
Toggles and indicates the headset mode.
MUTE Key
Toggles and indicates mute feature.
MESSAGE Key
Accesses voice messages.
HOLD Key
Places a call on hold or resumes a held call.
REDIAL Key
Redials a previously dialed number.
TRANSFER Key
Transfers a call to another party.
⑥
Speakerphone Key
Toggles the hands-free speakerphone mode.
⑦
Volume Key
⑧
Keypad
④
⑤
Adjusts the volume of the handset, headset, speaker,
and ringer.
Provides the digits, letters and special characters in
context-sensitive applications.
Scroll through the displayed information.
⑨
Confirms actions or answers incoming calls.
Cancels actions or rejects incoming calls.
⑩
2
Soft Keys
Label automatically to identify their context-sensitive
features.
Overview
Icons appearing on the LCD screen are described in the following table:
Icons
Description
Network is unavailable
Registered successfully
Register failed
Registering
Hands-free speakerphone mode
Handset mode
Headset mode
Multi-lingual lowercase letters input mode
Multi-lingual uppercase letters input mode
Alphanumeric input mode
Numeric input mode
Multi-lingual uppercase and lowercase letters
input mode
Voice Mail
Text Message
Auto Answer
Do Not Disturb
Call Forward
Call Hold
Call Mute
3
User Guide for the SIP-T46G IP Phone
Icons
Description
Ringer volume is 0
Keypad Lock
Received Calls
Placed Calls
Missed Calls
Recording box is full
A call cannot be recorded
Recording starts successfully
Recording cannot be started
Recording cannot be stopped
Bluetooth
Bluetooth headset is both paired and connected
Conference
The contact icon
The default caller photo
Power Indicator LED
LED Status
Solid red
The phone is initializing.
Fast flashing red (300ms)
The phone is ringing.
Slow flashing red (1s)
The phone receives a text message or voice mail.
Off
4
Description
The phone is powered off.
The phone is idle.
Overview
LED Status
Description
The phone is busy.
The call is placed on hold or is held.
The call is mute.
Line key LED
LED Status
Solid green
Description
The line is seized.
The line is in conversation.
Fast flashing green
The line receives an incoming call.
Slow flashing green
The call is placed on hold.
Off
The line is inactive.
Line key LED (configured as a BLF key)
LED Status
Description
Solid green
The monitored user is idle.
Fast flashing red (200ms)
The monitored user receives an incoming call.
Solid red
The monitored user is busy.
The call is parked against the monitored user’s
Slow flashing red (1s)
phone number.
The monitored user’s conversation is placed on
hold.
Off
The monitored user does not exist.
Line key LED (used as page a switch key)
LED Status
Solid red
Fast flashing green
Fast flashing red
Off
Note
Description
There is a parked call on the line key of the
non-current page.
The line receives an incoming call on the line key of
the non-current page.
The monitored user receives an incoming call on
the line key of the non-current page.
The line keys are idle.
The above introduces the default LED status. The statuses of the power indicator LED and
BLF key are configurable via web user interface. For more information, refer to
Yealink_SIP-T4X_IP_Phone_Family_Administrator_Guide.
5
User Guide for the SIP-T46G IP Phone
Two ways to customize configurations of your SIP-T46G IP phone:

The user interface on the IP phone.

The user interface in a web browser on your PC.
The hardware components keypad and LCD screen constitute the phone user interface,
which allows the user to execute all call operation tasks and basic configuration
changes directly on the phone. In addition, you can use the web user interface to
access all configuration settings. In many cases, it is possible to use either the phone
user interface and/or the web user interface interchangeably. However, in some cases,
it is only possible to use one or the other interface to operate the phone and change
settings.
You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced option is only accessible to the administrator, and the default
administrator password is “admin” (case-sensitive). For more information on
customizing your phone with the available options from the phone user interface, refer
to Customizing Your Phone on page 19.
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of
your new phone. To obtain the IP address, press the OK key on the phone. Enter the IP
address (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of web browser on
your PC. The default administrator user name and password are both “admin”
(case-sensitive).
The options you can use to customize the IP phone via phone user interface and/or via
web user interface are listed in the following table:
Options
Phone User Interface
Web User Interface
√
√
Status
--IPv4
--MAC
--Firmware
--Network
--Phone
--Accounts
Basic Call Features
6
√
Overview
Options
Phone User Interface
--Auto Answer
√
--Auto Redial
√
--Call Completion
√
--Call Forward
√
--Call Waiting
√
--Call Park
√
--Call Pickup
√
--Call Return
√
Web User Interface
--Conference
--Anonymous Call
√
--Anonymous Call Rejection
√
--DND
√
Basic Phone Settings
--Language
√
√
--Time & Date
√
√
--Administrator Password
√
√
--Ring Tones
√
√
--Contrast
√
--Wallpaper
√
√
--Backlight
√
√
--Keypad Lock
√
√
--Call History Management
√
--Contact Management
√
--Local Directory
√
√
--Blacklist
√
√
--Remote Phone Book
√
--LDAP
√
--Dial Plan
√
--DSS Keys
√
√
--Key as Send
√
√
--Hotline
√
√
--Live Dialpad
√
--Emergency Number
√
Advanced Phone Features
--BLF
√
--Call Recording
√
--Hot Desking
√
--Intercom
√
√
--Multicast Paging
--Music on Hold
--ACD
√
7
User Guide for the SIP-T46G IP Phone
Options
Phone User Interface
--Messages
Web User Interface
√
SIP Account
--User Options
--Register Status
√
--Account Status
√
--Label
√
--Display Name
√
--Register Name
√
--User Name
√
--Password
√
--SIP Server 1/2
√
√
--Server Option
--Registrar Port
--Outbound Status
√
--Outbound Proxy
√
--NAT Traversal
Note
--STUN Status
√
--STUN Server
√
The table above lists most of the feature options. Please refer to the relevant sections for
more information.
The following table shows documentations available for the SIP-T46G IP phone.
Name
Contents
Quick Installation
Basic setup of the
Guide
phone
Quick Reference
Guide
Where found
Language
In the package
English
In the package
English
On the website
English
Basic call features
and phone
customizations
Phone/Web user
interface settings
User Guide
Basic call features
and advanced
phone features
Note
8
You can also download the latest documentations online:
http://www.yealink.com/SupportDownloadfiles_detail.aspx?CateId=310&flag=142.
Getting Started
This chapter provides the following basic installation instructions and information for
obtaining the best performance with the SIP-T46G IP phone. Topics include:

Packaging Contents

Phone Installation

Phone Initialization

Phone Status

Basic Network Settings

Registration

Idle Screen
If you require additional information or assistance with your new phone, contact your
system administrator.
The following components are included in your SIP-T46G IP phone package:

SIP-T46G IP Phone

Phone Stand
9
User Guide for the SIP-T46G IP Phone

Wall Mount Bracket (Optional)

Power Adapter (Optional)

Handset & Handset Cord

Ethernet Cable

Quick Installation Guide & Quick Reference Guide
Check the list before installation. If you find anything missing, contact your system
administrator.
10
Getting Started
If your phone is already installed, proceed to Phone Initialization on page 13.
This section introduces how to install the phone:
1)
Attach the stand or the optional wall mount bracket
2)
Connect the handset and optional headset
3)
Connect the network and power
1)
Attach the stand or the optional wall mount bracket
Desk Mount Method
Wall Mount Method (Optional)
Note
The wall mount bracket should be purchased separately. For more information on how to
attach the wall mount bracket, refer to Yealink Wall Mount Quick Installation Guide for
T4X IP Phones.
11
User Guide for the SIP-T46G IP Phone
2)
Note
Connect the handset and optional headset
The headset, wireless headset adapter EHS36 and Bluetooth USB dongle BT40 should be
purchased separately.
The EXT port can also be used to connect an expansion module EXP40.
For more information on how to use EHS36, EXP40 and Bluetooth USB Dongle BT40, refer
to Yealink EHS36 User Guide, Yealink EXP40 User Guide and Yealink Bluetooth USB
Dongle BT40 User Guide.
3)
Connect the network and power
You have two options for power and network connections. Your system administrator will
advise you which one to use.

AC power (Optional)

Power over Ethernet (PoE)
AC Power (Optional)
To connect the AC power:
1.
Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.
2.
Connect the included or a standard Ethernet cable between the Internet port on the
phone and the one on the wall or switch/hub device port.
12
Getting Started
Power over Ethernet
With the included or a regular Ethernet cable, the SIP-T46G IP phone can be powered
from a PoE-compliant switch or hub.
To connect the PoE:
1.
Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power switch/hub.
Note
If in-line power switch/hub is provided, you don’t need to connect the phone to the power
adapter. Make sure the switch/hub is PoE-compliant.
The phone can also share the network with another network device such as a PC
(personal computer). It is an optional connection.
Important! Do not unplug or remove power to the phone while it is updating firmware
and configurations.
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen
displays "Initializing…Please wait" during the initialization.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4
network settings (e.g., IP address, subnet mask, default gateway address and DNS
address) by default.
Note
If your network does not use DHCP, proceed to Basic Network Settings on page 15.
13
User Guide for the SIP-T46G IP Phone
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:

Network status (e.g., IPv4 status, IPv6 status, IP address mode and MAC address).

Phone status (e.g., device model, hardware version, firmware version, product ID,
MAC address and device certificate status).

Note
Account status (e.g., register status of SIP accounts).
You can view device certificate status via phone user interface only.
To view the phone status via phone user interface:
1.
Press
, or press Menu->Status.
2.
Press
or
to scroll through the list and view the specific information.
To view the phone status via web user interface:
14
1.
Open the web browser on your computer.
2.
Enter the IP address in the browser’s address bar, and then press the Enter key.
3.
Enter the user name (admin) and password (admin) in the login page.
4.
Click Confirm to login.
Getting Started
The phone status is displayed on the first page of the web user interface.
If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.
To configure the IP address mode via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Network->WAN Port.
2.
Press
or
, or the Switch soft key to select IPv4, IPv6 or IPv4 & IPv6 from the IP
Address Mode field.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
15
User Guide for the SIP-T46G IP Phone
To configure a static IPv4 address via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Network->WAN Port->IPv4.
2.
Press
3.
Enter the desired values in the IP Address, Subnet Mask, Gateway, Primary DNS
or
, or the Switch soft key to select the Static IP from the Type field.
and Secondary DNS fields respectively.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv6 address via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Network->WAN Port->IPv6.
2.
Press
3.
Enter the desired values in the IP Address, IPv6 IP Prefix, Gateway, Primary DNS and
or
, or the Switch soft key to select the Static IP from the Type field.
Secondary DNS fields respectively.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE
mode. Set the WAN port as a PPPoE port. The PPPoE port will perform a PPP negotiation
to obtain the IP address. Contact your system administrator for the PPPoE user name
and password.
To configure PPPoE via phone user interface:
16
1.
Press Menu->Advanced (password: admin) ->Network->WAN Port->IPv4.
2.
Press
or
, or the Switch soft key to select the PPPoE from the Type field.
Getting Started
Note
3.
Enter the user name and password in the corresponding fields.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready for use. If your phone is not
registered, you may have to register it. For more information on how to register your
phone, refer to Account Management on page 71.
If the phone has successfully started up, the idle LCD screen will be shown as below.
17
User Guide for the SIP-T46G IP Phone
Idle Screen description:
No.
1
2
Description
This area shows the phone’s time and date.
This area shows the phone feature status. For more information,
refer to Icon Instructions on page 3.
This area shows the line key labels. You can customize the line key
3
as other functions. For more information, refer to Line Keys on
page 60.
4
5
6
18
This area shows three page icons.
This area shows the soft key labels. The default soft key labels are
“History”, “Directory”, “DND” and “Menu”.
This area shows the wallpaper. You can customize the wallpaper.
For more information, refer to Wallpaper on page 19.
Customizing Your Phone
You can customize your SIP-T46G IP phone by personally configuring certain settings, for
example, contrast, time & date and ring tones. You can add contacts to the phone’s
local directory manually or from call history. You can also personalize different ring
tones for different callers.
This chapter provides basic operating instructions for customizing your phone. Topics
include:

General Settings

Audio Settings

Contact Management

Call History Management

System Customizations
If you require additional information or assistance with your new phone, contact your
system administrator.
You can customize the wallpaper of the SIP-T46G IP phone. You can change the
wallpaper image via phone user interface or web user interface. You can also upload
custom wallpaper images via web user interface. The file format of wallpaper image
must be *.jpg, *.png or *.bmp. Contact your system administrator for the detailed
requirement of the file format.
To change the wallpaper via phone user interface:
1.
Press Menu->Basic->Display->Wallpaper.
19
User Guide for the SIP-T46G IP Phone
2.
Press
or
, or the Switch soft key to select the desired wallpaper image.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
Wallpaper is configurable via web user interface at the path Settings->Preference.
To upload the customized wallpaper via web user interface:
1.
Click on Settings->Preference.
2.
In the Upload Wallpaper(480*272) field, click Browse to select the wallpaper image
from your local system.
3.
Click Upload to upload the file.
4.
Click Confirm to accept the change.
The customized wallpaper appears in the pull-down list of Wallpaper.
You can configure backlight to adjust the brightness of the LCD screen. Backlight On
Intensity is used to adjust the backlight intensity of the LCD screen. Backlight time
specifies the delay time to turn off or dusky the backlight when the IP phone is inactive.
Backlight Idle Intensity decides whether the IP phone turns off or dusky the backlight of
the LCD screen after a period of inactivity.
You can configure the backlight status on the LCD screen as the following types:

Always On: Backlight is on permanently.

15, 30, 60, 120, 300, 600 or 1800: Backlight is turned off or dusky when the phone is
inactive after the specified time (in seconds).
20
Customizing Your Phone
To configure the backlight via phone user interface:
1.
Press Menu->Basic->Display->Backlight.
2.
Press
or
, or the Switch soft key to select the desired level from the
Backlight Active Level field.
3.
Press
or
, or the Switch soft key to select the desired value from the
Backlight Inactive Level field.
4.
Press
or
, or the Switch soft key to select the desired time from the
Backlight Time field.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
Backlight is configurable via web user interface at the path Settings->Preference.
You can configure the contrast of EXP40 to a comfortable level. Ensure EXP40 has been
connected to the phone before configuration.
To configure the contrast via phone user interface:
1.
Press Menu->Basic->Display->Contrast.
2.
Press
or
, or the Switch soft key to increase or decrease the intensity of
contrast.
The default contrast level is 6.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
21
User Guide for the SIP-T46G IP Phone
The default language of the phone user interface is English. The phone will detect and
use the same language as which of your web browser for the web user interface. If the
language of your web browser is not supported by the phone, the web user interface
will use English by default. You can change the language for the phone user interface
and the web user interface respectively.
Note
Not all of the supported languages are available for selection. The available languages
depend on the language packs currently loaded to the IP phone. Please contact your
system administrator for more information on the available languages of your new
phone.
To change the language for the phone user interface:
1.
Press Menu->Basic->Language.
2.
Press
3.
Press the Save soft key to accept the change.
or
to select the desired language.
Text displayed on the phone user interface will change to the selected language.
To change the language for the web user interface:
1.
22
Click on Settings->Preference.
Customizing Your Phone
2.
Select the desired language from the pull-down list of Language.
3.
Click Confirm to accept the change.
Text displayed on the web user interface will change to the selected language.
The time and date are displayed on the LCD screen when the phone is idle. You can
configure the phone to obtain the time and date from the SNTP server automatically, or
configure the time and date manually. If the phone cannot obtain the time and date
from the Simple Network Time Protocol (SNTP) server, contact your system administrator
for more information.
To configure the SNTP settings via phone user interface:
1.
Press Menu->Basic->Time & Date->General->SNTP Settings.
2.
Press
or
, or the Switch soft key to select the time zone that applies to your
area from the Time Zone field.
The default time zone is "+8 China(Beijing)".
3.
Enter the domain names or IP addresses in the NTP Server 1 and NTP Server 2 fields
respectively.
23
User Guide for the SIP-T46G IP Phone
4.
Press
or
, or the Switch soft key to select the desired value from the
Daylight Saving field.
5.
Note
Press the Save soft key to accept the change or the Back soft key to cancel.
Please refer to Appendix A - Time Zones for the list of available time zones on the IP
phone.
To configure the time and date manually via phone user interface:
1.
Press Menu->Basic->Time & Date->General->Manual Settings.
2.
Enter the specific date and time.
3.
Press the Save soft key to accept the change.
The time and date displayed on the LCD screen will change accordingly.
To configure the date and time format via phone user interface:
1.
24
Press Menu->Basic->Time & Date->Format.
Customizing Your Phone
2.
Press
or
, or the Switch soft key to select the desired date format from the
Date Format field.
3.
Press
or
, or the Switch soft key to select the desired time format (12 Hour
or 24 Hour) from the Time Format field.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
There are 7 available date formats. For example, for the date format “WWW DD MMM”,
“WWW” represents the abbreviation of the week, “DD” represents the two-digit day,
and “MMM” represents the first three letters of the month.
The date formats you need to know:
Date Format
Example (2013-7-27)
WWW MMM DD
Sat Jul 27
DD-MMM-YY
27-Jul-13
YYYY-MM-DD
2013-07-27
DD/MM/YYYY
27/07/2013
MM/DD/YY
07/27/13
DD MMM YYYY
27 Jul 2013
WWW DD MMM
Sat 27 Jul
Time and date are configurable via web user interface at the path Settings->Time &
Date.
The Advanced option is only accessible to the administrator. The default administrator
password is “admin”. For security reasons, you should change the default administrator
password as soon as possible.
To change the administrator password via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Set Password.
25
User Guide for the SIP-T46G IP Phone
2.
Enter the old password in the Current Password field.
3.
Enter the new password in the New Password field.
4.
Enter the new password again in the Confirm Password field.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path
Security->Password.
You can set the "#" or "*" to perform as a send key while dialing.
To configure key as send via phone user interface:
1.
Press Menu->Call Features->Others->General.
2.
Press
or
, or the Switch soft key to select # or * from the Key as Send field,
or select Disabled to disable this feature.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
26
Customizing Your Phone
You can lock the keypad of your phone temporarily when you are not using it. This
feature helps to protect your phone from unauthorized use.
Keypad lock consists of the following:
Menu Key:
The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
Function Keys:
The function keys are locked. You cannot use the MESSAGE,
REDIAL, HOLD, MUTE, TRANSFER, OK, X, navigation keys, soft
keys and line keys until unlocked.
All Keys:
All keys are locked except the Volume key. You are only
allowed to dial emergency numbers, reject incoming calls by
pressing the X key, answer incoming calls by lifting the handset,
pressing the Speakerphone key, the HEADSET key or the OK
key, mute an active call by pressing the X key, place an active
call on hold by pressing the Hold soft key, resume the held call
by pressing the Resume soft key, and end the call by hanging
up the handset or pressing the Speakerphone key.
Note
The emergency number setting, if desired, must be made before lock activation. For
more information, refer to Emergency Number on page 79.
To activate the keypad lock via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Phone Settings->Keypad Lock.
2.
Press
or
, or the Switch soft key to select Enabled from the Keypad Lock
Enable field.
3.
Press
or
, or the Switch soft key to select the desired type from the Keypad
Lock Type field.
4.
Press the Save soft key to accept the change.
Long press
to lock the keypad immediately when the phone is idle.
27
User Guide for the SIP-T46G IP Phone
The LCD screen prompts “Keypad Lock!” and displays the icon
.
You can configure the interval (in seconds) to automatically lock the keypad instead of
long pressing
.
To configure the interval of automatic keypad lock via web user interface:
Note
1.
Click on Features->Phone Lock.
2.
Enter the desired time in the Phone Lock Time Out (0~3600s) field.
3.
Click Confirm to accept the change.
The default timeout is 0 second, that is, you need to long press
only.
to lock the keypad
Interval of automatic keypad lock is configurable via web user interface only.
To unlock the keypad, you must know the keypad unlock PIN of the phone. The default
keypad unlock PIN is “123”.
28
Customizing Your Phone
To change the keypad unlock PIN via phone user interface:
1.
Press Menu->Basic->Phone Unlock PIN.
2.
Enter the desired values in the Current PIN, New PIN and Confirm PIN fields
respectively.
3.
Note
Press the Save soft key to accept the setting or the Back soft key to cancel.
The unlock PIN length must be within 15 digits.
To unlock the keypad via phone user interface:
1.
Press any locked key, the LCD screen prompts “Unlock PIN”.
2.
Enter the PIN in the Unlock PIN field.
3.
Press the OK soft key to unlock the keypad.
The
icon disappears from the LCD screen.
You can long press
or wait for a period of time (if configured) to lock the
keypad again.
Note
You can also unlock the keypad by administrator password.
To deactivate the keypad lock via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Phone Settings->Keypad Lock.
29
User Guide for the SIP-T46G IP Phone
2.
Press
or
, or the Switch soft key to select Disabled from the Keypad Lock
Enable field.
3.
Press the Save soft key to accept the change.
Keypad lock is configurable via web user interface at the path Features->Phone Lock.
You can press the volume key to adjust the ringer volume when the phone is idle. You
can also press the volume key to adjust the receiver volume of currently engaged audio
devices (handset, speakerphone or headset) when the phone is in use.
To adjust the volume when the phone is idle:
1.
Note
30
Press
to adjust the ringer volume.
If ringer volume is adjusted to minimum, the
icon will appear on the LCD screen.
Customizing Your Phone
To adjust the volume when the phone is during a call:
1.
Press
to adjust the volume of currently engaged audio device (handset,
speakerphone or headset).
Ring tones are used to indicate incoming calls. You can select different ring tones to
distinguish different accounts registered on your phone, or to distinguish your phone
from your neighbor’s.
To select a ring tone for the phone via phone user interface:
1.
Press Menu->Basic->Sound->Ring Tones.
2.
Press
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
or
to select the desired ring tone.
To select a ring tone for the account via web user interface:
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Basic.
4.
Select the desired ring tone from the pull-down list of Ring Type.
31
User Guide for the SIP-T46G IP Phone
If Common is selected, this account will use the ring tone selected for the phone.
Refer to the above instruction.
5.
Note
Click Confirm to accept the change.
A ring tone for the account is configurable via web user interface only.
The ring tone for an incoming call on the phone may be different. For example, when the
phone receives an incoming call from a contact stored in the local directory, it will play
the ring tone assigned to the contact in the local directory (refer to Adding Contacts). If
no ring tone is assigned to the contact, the phone will play the ring tone assigned to the
associated group (refer to Groups). Otherwise, the phone will play the ring tone
assigned to the account. If no ring tone is assigned to the contact and account, the phone
will play the ring tone assigned to the phone.
To upload a custom ring tone for your phone via web user interface:
1.
32
Click on Settings->Preference.
Customizing Your Phone
2.
In the Upload Ringtone field, click Browse to locate a ring tone (the file format must
be *.wav) file from your local system.
3.
Note
Click Upload to upload the file.
All custom ring tone files must be within 100KB. Uploading custom ring tones for your
phone is configurable via web user interface only.
This section provides the operating instructions for managing contacts. Topics include:

Directory

Local Directory

Blacklist

Remote Phone Book
Directory provides easy access to frequently used lists. The lists may contain Local
Directory, History, Remote Phone Book and LDAP.
To configure the directory via web user interface:
1.
Click on Directory->Setting.
2.
In the Directory block, select the desired list from the Disabled column and then
click
.
The selected list appears in the Enabled column.
33
User Guide for the SIP-T46G IP Phone
3.
Repeat the step 2 to add more lists to the Enabled column.
4.
To remove a list from the Enabled column, select the desired list and then click
5.
To adjust the display order of enabled lists, select the desired list and then click
or
.
The LCD screen displays the list(s) in the adjusted order.
6.
Note
Click Confirm to accept the change.
Directory is configurable via web user interface only.
To check directory via phone user interface:
1.
Press the Directory soft key when the phone is idle.
The LCD screen displays the enabled list(s) in the directory.
34
.
Customizing Your Phone
If there is only one list in the directory, press the Directory soft key to enter this list
directly.
Note
If the remote phone book and LDAP are not configured in advance, you cannot see
remote phone book and LDAP lists on the phone user interface. For more information on
remote phone book, refer to Remote Phone Book on page 49. For more information on
the LDAP, refer to Yealink SIP-T4X IP Phone Family Administrator Guide.
The built-in phone directory can store the names and phone numbers of your contacts.
You can store up to 1000 contacts and 50 groups in your phone's local directory. There
are four default groups in the local directory: All Contacts, Company, Family and Friend.
You can add new groups and contacts; edit, delete or search for a contact; or simply
dial a contact number from the local directory.
To add a group to the local directory:
1.
Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
2.
Press the Add Group soft key.
3.
Enter the desired group name in the Group Name field.
4.
Press
or
to select the desired group ring tone from the Ring Tones field.
35
User Guide for the SIP-T46G IP Phone
If Auto is selected, this group will use the ring tone assigned to the account. For
more information on the ring tone for the account, refer to Ring Tones on page 31.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
You can also edit or delete the Company, Family and Friend contact groups.
To edit a group in the local directory:
1.
Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
36
2.
Select the desired contact group.
3.
Press the Option soft key and then select Detail from the prompt list.
Customizing Your Phone
4.
Press
or
to highlight the group information and then edit.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
To delete a group from the local directory:
1.
Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
2.
Select the desired contact group.
3.
Press the Option soft key and then select Delete from the prompt list.
The LCD screen prompts the following warning:
4.
Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
You can add contacts to the local directory in the following ways:

Manually

From call history

From remote phone book
37
User Guide for the SIP-T46G IP Phone
Adding Contacts Manually
To add a contact to the local directory manually:
1.
Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
2.
Select the desired contact group and press the Enter soft key.
3.
Press the Add soft key.
4.
Enter the name and the office, mobile or other numbers in the corresponding fields.
5.
Press
or
, or the Switch soft key to select the desired account from the
Account field.
If Auto is selected, the phone will use the first available account when placing calls
to the contact from the local directory.
6.
Press
or
, or the Switch soft key to select the desired ring tone from the Ring
field.
If Auto is selected, this contact will use the ring tone assigned to the group.
7.
Highlight Photo and press the Enter soft key.
8.
Press
field.
38
or
, or the Switch soft key to select the desired photo from the Photo
Customizing Your Phone
9.
Note
Press the Save soft key to accept the change or the Back soft key to cancel.
If the contact has existed in the directory, the LCD screen will prompt “Contact name
already existed!”.
Adding Contacts from Call History
To add a contact to the local directory from the call history:
1.
Press the History soft key.
2.
Press
3.
Press the Option soft key, and then select Add to Contacts from the prompt list.
4.
Enter the contact name.
5.
Press the Save soft key to accept the change.
or
to highlight the desired entry.
The entry is successfully saved to the local directory.
Adding Contacts from remote phone book
To add a contact to the local directory from remote phone book:
1.
Press Directory->Remote Phone Book.
If Remote Phone Book is removed from the directory, press
Menu->Directory->Remote Phone Book to enter remote phone book.
2.
Select the desired remote group and press the Enter soft key.
3.
Press
4.
Press the Option soft key, and then select Add to Contacts from the prompt list.
5.
Press the Save soft key to save the contact to the local directory.
or
to highlight the desired entry.
If the contact has already existed in the local directory, the LCD screen will prompt
"Overwrite the original contact?". Press the OK soft key to overwrite the original
contact in the local directory or the Cancel soft key to cancel.
For more information on remote phone book operating, refer to Remote Phone Book on
page 49.
39
User Guide for the SIP-T46G IP Phone
To edit a contact in the local directory:
1.
Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
40
2.
Select the desired contact group and press the Enter soft key.
3.
Press
4.
Press the Option soft key, and then select Detail from the prompt list.
5.
Press
6.
Press the Save soft key to accept the change or the Back soft key to cancel.
or
or
to highlight the desired contact.
to highlight the contact information and then edit.
Customizing Your Phone
To delete a contact from the local directory:
1.
Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
2.
Select the desired contact group and press the Enter soft key.
3.
Press
4.
Press the Option soft key, and then select Delete from the prompt list.
or
to highlight the desired contact.
The LCD screen prompts the following warning:
5.
Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
You can also delete all contacts by pressing the Option soft key, and then select Delete
All.
To upload a new custom photo for the contact via web user interface:
1.
Click on Directory->Local Directory.
2.
Click Browse, and then select a photo from your local computer.
3.
Click Upload Photo to upload the photo.
41
User Guide for the SIP-T46G IP Phone
You can also click Delete Photo to delete the photo.
Note
The phone only supports the *.png, *.jpg and *.bmp format files.
You can only delete the custom photo.
To change the custom photo for the contact via web user interface:
1.
Click on Directory->Local Directory.
2.
Click to select the desired entry which you want to edit.
3.
Select the desired photo from the pull-down list of Photo.
4.
Click Edit to accept the change.
When you place a call to the contact or receive a call from the contact, the LCD screen
will show the contact photo.
42
Customizing Your Phone
To place a call to a contact from the local directory:
1.
Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
2.
Select the desired contact group and press the Enter soft key.
3.
Press
4.
Do one of the following:
-
or
to highlight the desired contact.
If only one number of the contact is stored in the local directory, press the Send
soft key to dial out the number.
-
If multiple numbers of the contact are stored in the local directory, press the
Send soft key to display a list of numbers.
Press
or
to highlight the desired number.
Press the Send soft key to dial out the number.
To search for a contact in the local directory:
1.
Press the Directory soft key.
43
User Guide for the SIP-T46G IP Phone
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
2.
Press the Search soft key.
3.
Enter a few continuous characters of the contact name or the contact number using
the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen. You can dial from the result list.
You can search for a contact from the desired lists when the phone is in the dialing
screen. The lists can be Local Directory, History, Remote Phone Book and LDAP.
To configure search source list in dialing via web user interface:
1.
Click on Directory->Setting.
2.
In the Search Source List In Dialing block, select the desired list from the Disabled
column and click
.
The selected list appears in the Enabled column.
44
3.
Repeat step 2 to add more lists to the Enabled column.
4.
To remove a list from the Enabled column, select the desired list and then click
5.
To adjust the display order of the enabled list, select the desired list, and click
.
Customizing Your Phone
or
.
The LCD screen displays the search results in the adjusted order.
6.
Note
Click Confirm to accept the change.
Search source list in dialing is configurable via web user interface only.
To search for an entry in the enabled search source lists:
1.
Pick up the handset, press the speakerphone key or press the line key.
2.
Enter a few continuous characters of the entry’s name or the entry’s phone number
using the keypad.
The entries in the enabled search source lists whose name or phone number
matches the characters entered will appear on the LCD screen. You can press
or
to scroll to the desired entry and then place a call to the entry.
45
User Guide for the SIP-T46G IP Phone
You can manage your phone’s local directory via phone user interface or web user
interface. But you can only import or export the contact list via web user interface.
To import an XML file of contact list via web user interface:
1.
Click on Directory->Local Directory.
2.
Click Browse to locate a contact list file (file format must be .xml) from your local
system.
3.
Click Import XML to import the contact list.
The web user interface prompts "The original contact will be covered, Continue?".
4.
Click OK to complete importing the contact list.
To import a CSV file of contact list via web user interface:
1.
Click on Directory->Local Directory.
2.
Click Browse to locate a contact list file (file format must be .csv) from your local
system.
3.
(Optional.)Check the Show Title checkbox.
It will prevent importing the title of the contact information which is located in the
first line of the CSV file.
4.
Click Import CSV to import the contact list.
5.
(Optional.) Mark the On radio box in the Delete Old Contacts field.
It will delete all existing contacts while importing the contact list.
46
Customizing Your Phone
6.
(Optional.) Select the contact information you want to import into the local directory
from the pull-down list of Index.
7.
Click Import to complete importing the contact list.
To export a contact list via web user interface:
1.
Click on Directory->Local Directory.
2.
Click Export XML (or Export CSV).
3.
Click Save to save the contact list to your local system.
Note
Importing/exporting contact lists is available via web user interface only.
The built-in phone directory can store the names and phone numbers for a blacklist. You
can store up to 30 contacts; add, edit, delete or search for a contact in the blacklist
directory; even call a contact from the blacklist directory, but incoming calls from the
blacklist directory contacts will be rejected automatically.
To add a contact to the blacklist directory manually:
1.
Press Menu->Directory ->Blacklist.
2.
Press the Add soft key.
47
User Guide for the SIP-T46G IP Phone
3.
Enter the name and the office, mobile or other numbers in the corresponding fields.
4.
Press
or
, or the Switch soft key to select the desired account from the
Account field.
If Auto is selected, the phone will use the first available account when placing calls
to the contact from the blacklist directory.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
To add a contact to the blacklist directory from the local directory:
1.
Press Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Group to enter the local directory.
48
2.
Select the desired contact group and press the Enter soft key.
3.
Press
4.
Press the Option soft key and then select Add to Blacklist from the prompt list.
or
to highlight the desired contact.
Customizing Your Phone
The LCD screen prompts the following warning:
5.
Press the OK soft key to confirm the setting.
For operating instructions on editing, deleting, placing calls to and/or searching for
contacts in the blacklist directory, refer to the operating instructions of Local Directory on
page 35.
You can add local contacts, search for a contact, or simply dial a contact number from
the corporate directory.
You can configure your new phone to access up to 5 corporate directories. All remote
phone books must be less than 0.5MB in size. For the access URL of the corporate
directory, contact your system administrator.
To configure an access URL for remote phone book via web user interface:
Note
1.
Click on Directory->Remote Phone Book.
2.
Enter the access URL in the Remote URL field.
3.
Enter the name in the Display Name field.
4.
Click Confirm to accept the change.
An access URL for remote phone book is configurable via web user interface only.
49
User Guide for the SIP-T46G IP Phone
To access your corporate directory via phone user interface:
1.
Press Directory->Remote Phone Book.
If Remote Phone Book is removed from the directory, press
Menu->Directory->Remote Phone Book to enter remote phone book.
2.
Select the desired remote group, and then press the Enter soft key.
The phone connects to load the corporate directory, and then the corporate contact
list appears on the LCD screen.
3.
Press the Back soft key to back to the previous interface.
To search for a contact in the corporate directory:
1.
Press Menu->Directory->Remote Phone Book.
If Remote Phone Book is added to the directory, press Directory->Remote Phone
Book to enter remote phone book.
2.
Select the desired remote group, and then press the Enter soft key to load the
corporate directory.
3.
Press the Search soft key.
4.
Enter a few continuous characters of the contact name or continuous numbers of the
contact number using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen. You can place a call from the result list.
50
Customizing Your Phone
To place a call from the corporate directory:
1.
Press Menu->Directory->Remote Phone Book.
If Remote Phone Book is added to the directory, press Directory->Remote Phone
Book to enter remote phone book.
2.
Select the desired remote group, and then press the Enter soft key to load the
corporate directory.
3.
Select the desired contact in the corporate directory.
4.
Press the Send soft key.
In addition, you can enable the phone to present the caller identity stored in the
corporate directory when receiving a call.
To enable the presentation of caller identity stored in remote phone book via web user
interface:
1.
Click on Directory->Remote Phone Book.
2.
Select Enabled from the pull-down list of Search Remote Phonebook Name.
3.
Enter the refresh period in the Search Flash Time (Seconds) field.
The default value is 21600 seconds.
4.
Click Confirm to accept the change.
The SIP-T46G IP phone maintains call history lists of Missed calls, Placed calls, Received
calls and Forwarded calls. Call history lists support 400 entries in all. You can view the
call history, place a call, add a contact or delete an entry from the call history list. You
should enable history record in advance.
To enable history record via phone user interface:
1.
Press Menu->Call Features->Others->General.
51
User Guide for the SIP-T46G IP Phone
2.
Press
or
, or the Switch soft key to select Enabled from the History Record
field.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
To view the call history:
1.
Press the History soft key.
The LCD screen displays all call records.
2.
Press
or
to switch between All, Missed, Placed, Received and Forwarded
or
to select the desired entry.
call lists.
3.
Press
4.
Press the Option soft key, and then select Detail from the prompt list.
The detailed information of the entry appears on the LCD screen.
To place a call from the call history list:
1.
Press the History soft key.
2.
Press
or
to switch between All, Missed, Placed, Received and Forwarded
or
to select the desired entry.
call lists.
3.
Press
4.
Press the Send soft key.
To add a contact to the local directory (or blacklist directory) from the call history list:
1.
Press the History soft key.
2.
Press
or
to switch between All, Missed, Placed, Received and Forwarded
or
to select the desired entry.
call lists.
3.
Press
4.
Press the Option soft key, and then select Add to Contacts (or Add to Blacklist) from
the prompt list.
5.
Enter the desired values in the corresponding fields.
6.
Press the Save soft key.
For more information, refer to Contact Management on page 33.
52
Customizing Your Phone
To delete an entry from the call history list:
1.
Press the History soft key.
2.
Press
or
to switch between All, Missed, Placed, Received and Forwarded
or
to select the desired entry.
call lists.
3.
Press
4.
Press the Delete soft key.
To delete all entries from the call history list:
1.
Press the History soft key.
2.
Press
or
to switch between All, Missed, Placed, Received and Forwarded
call lists.
3.
Press the Option soft key, and then select Delete All from the prompt list.
4.
Press the OK soft key.
The LCD screen prompts "Delete all records?".
5.
Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
If you want to use a wired headset, physically connect your headset and activate the
headset mode for use. For more information on physically connecting a headset, refer
to Phone Installation on page 11.
If you want to use a wireless headset, insert the Bluetooth USB dongle into the USB port on
the back of the phone. For more information on using a Bluetooth headset, refer to Bluetooth
Headset on page 55.
This section provides the introduction of the wired headset.
Note
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth
headset can be used.
To activate the headset mode:
1.
Press
on the phone.
The HEADSET key LED illuminates solid green when the headset mode is activated.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and press the Send soft key, then the phone will place a
53
User Guide for the SIP-T46G IP Phone
call using the headset automatically. For more information on using the headset to
place a call, refer to Placing Calls on page 83.
To deactivate the headset mode:
1.
Press
again on the phone.
The HEADSET key LED goes out when the headset mode is deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1.
Click on Features->General Information.
2.
Select Enabled from the pull-down list of Headset Prior.
3.
Click Confirm to accept the change.
To use headset prior, you should activate the headset mode in advance:
Note
1.
Physically connect the headset.
2.
Press
to activate the headset mode.
If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
Headset prior is configurable via web user interface only.
54
Customizing Your Phone
You can use two headsets when enabling dual headset. To use this feature, you must
physically connect headsets to the headset jack and handset jack respectively. Once
the phone connects to a call, the headset connected to the headset jack will have
full-duplex capabilities, while the one connected to the handset jack will only be able to
listen.
To enable dual headset via web user interface:
Note
1.
Click on Features->General Information.
2.
Select Enabled from the pull-down list of Dual-Headset.
3.
Click Confirm to accept the change.
Dual headset is configurable via web user interface only.
The SIP-T46G IP phone supports Bluetooth. Bluetooth enables low-bandwidth wireless
connections within a range of 10 meters (32 feet). The best performance is in the 1- to
2-meter (3- to 6-foot) range.
55
User Guide for the SIP-T46G IP Phone
You can activate/deactivate the Bluetooth mode, and then pair and connect the
Bluetooth headset with your phone. You can also disconnect and delete your Bluetooth
headset from the phone.
Note
Ensure that the Bluetooth USB dongle is properly connected into the USB port on the back
of the phone. For more information, refer to Phone Installation on page 11.
To activate the Bluetooth mode via phone user interface:
1.
Press Menu->Basic->Bluetooth.
2.
Press
3.
Press the Save soft key to accept the change.
or
, or the Switch soft key to select On from the Bluetooth field.
The LCD screen displays the Bluetooth icon
.
To deactivate the Bluetooth mode via phone user interface:
1.
Press Menu->Basic->Bluetooth.
2.
Press
3.
Press the Save soft key to accept the change.
or
, or the Switch soft key to select Off from the Bluetooth field.
The Bluetooth icon
disappears from the phone.
Bluetooth mode is configurable via web user interface at the path Features->Bluetooth.
Before you pair a Bluetooth headset, check the indicator on the Bluetooth headset to
make sure the Bluetooth headset is discoverable. For more information, refer to the
documentation from the Bluetooth headset manufacturer.
56
Customizing Your Phone
To pair and connect your Bluetooth headset to your phone:
1.
Press Menu->Basic->Bluetooth.
2.
Press the Scan soft key to search the Bluetooth devices.
The LCD screen prompts the following message:
The phone proceeds to scan the local Bluetooth devices. When the phone
completes scan, it will display the found Bluetooth devices on the LCD screen.
3.
Select the desired Bluetooth headset and press Connect soft key.
4.
Enter the PIN in the Password field.
The default PIN is “0000” or “1234”.
5.
Press the OK soft key.
After a while, the Bluetooth headset is automatically connected to your phone.
57
User Guide for the SIP-T46G IP Phone
The Bluetooth icon
appears on the LCD screen.
With the Bluetooth headset paired and connected, you can use the Bluetooth headset
to place and answer calls. For more information, refer to the documentation from the
Bluetooth headset manufacturer.
To view the Bluetooth headset information:
1.
Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
The LCD screen displays a list of paired and connected Bluetooth headsets.
2.
Select the desired Bluetooth headset.
3.
Press the Option soft key, and then select Detail from the prompt list to view the
Bluetooth headset information:
58

Device Name: the name of the Bluetooth headset.

MAC Address: the MAC address of the Bluetooth headset.
Customizing Your Phone

Auto Connection: Enables or disables the Bluetooth headset to connect with the
phone automatically.
To change the priority of paired Bluetooth devices:
1.
Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
2.
Select the desired Bluetooth headset.
3.
Press the Option soft key, and then select Move Up or Move Down from the prompt
list.
The top one has the highest priority. When there is no Bluetooth headset connected,
the phone will automatically connect to the Bluetooth headset with the highest
priority.
You can disconnect the Bluetooth headset from your phone. When you disconnect the
Bluetooth headset, it still displays in the Paired Bluetooth Device list. You can easily
connect it to your phone again.
To disconnect your Bluetooth headset from your phone:
1.
Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
2.
Select the connected Bluetooth headset.
3.
Press the Disconnect soft key.
The Bluetooth headset is disconnected. To connect it to your phone again, press the
Connect soft key.
You can delete your Bluetooth headset from your phone. When you delete the Bluetooth
headset, it disappears from the Paired Bluetooth Device list. To connect it to your phone
again, you need to scan and connect it again.
To delete your Bluetooth headset from your phone:
1.
Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
2.
Select the Bluetooth headset you want to delete.
3.
Press the Option soft key, and then select Delete from the prompt list.
The LCD screen prompts the following warning “Delete the selected item?”.
59
User Guide for the SIP-T46G IP Phone
4.
Note
Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
You can also delete all headsets by pressing the Option soft key and then select Delete
All. For more information, refer to the above steps.
If you cannot connect a Bluetooth headset to the phone successfully, we recommend you
to delete the Bluetooth headset in the Paired Bluetooth Device list (if existed) before
pairing it.
Two types of DSS keys: Line Keys and Programmable Keys. Details will be introduced in
the following. The SIP-T46G IP phone supports 27 line keys.
You can assign predefined functionalities to line keys. You can also define a label for line
key feature which will appear on the LCD screen. Line keys allow you to quickly access
features such as call return and voice mail. The line key LEDs will indicate the monitored
status when the line keys are assigned with particular features, such as BLF. The default
key type of line key 1-6 is Line. The default key type of line key 7-27 is N/A, which
indicates that this line key provides no functionality until configuration.
To assign functionality to the line key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired line key, and then press the Enter soft key.
3.
Select the desired key type from the Type field.
4.
(Optional.) Select the desired key event type from the Key Event field.
5.
(Optional.) Select the desired line from the Account ID field.
6.
(Optional.) Enter a string that will appear on the LCD screen in the Label field.
7.
(Optional.) Enter the corresponding value in the Value field.
8.
(Optional.) Enter the corresponding value in the Extension field.
9.
Press the Save soft key to accept the change or the Back soft key to cancel.
Line key is configurable via web user interface at the path DSSKey->Line Key.
Note
60
When the phone is idle, you can also long press the line key to configure it directly on the
phone.
Customizing Your Phone
You can assign functionalities to 27 line keys. These 27 line keys are indicated on three
pages. When you assign functionality to line keys located in line key 1-10, the labels of
line keys are indicated on the first page. The following figure shows an example:
When you assign functionality to line key located in line key 11-27, the label of the line
key 10-18 are indicated on the second page, and the labels of the line key 19-27 are
indicated on the third page. The right bottom line key is used to switch pages. The
following figure shows an example:
You can configure the page icon and page switch key LED to indicate different statuses.
This feature is disabled by default.
The following table lists the page icon status:
Icons
Indicates the current page of line keys.
2
1
Description
3
Indicates the non-current page of line keys.
For more information on the page switch key LED status, refer to LED Instructions on
page 4.
The following table lists the page icon status to indicate different statuses:
Icons
1
Description
Fast flashing: the BLF monitored user receives an incoming
call on the non-current page.
61
User Guide for the SIP-T46G IP Phone
Solid red: there is a parked call on the non-current page.
1
Fast flashing: the line receives an incoming call on the
non-current page.
To configure the page icon to indicate status via web user interface:
1.
Click on DSSKey->Line Key.
2.
Select Enabled from the pull-down list of Enable Page Tips.
3.
Click Confirm to accept the change.
You can specify labels for some key features, which will be displayed on the LCD screen.
If the length of the specified label exceeds the maximum display length, the phone only
displays the first few characters. You can configure the phone to display more
characters via label length feature.
To configure the page icon to indicate status via web user interface:
62
1.
Click on DSSKey->Line Key.
2.
Select Extended from the pull-down list of Label Length.
Customizing Your Phone
3.
Note
Click Confirm to accept the change.
Page icon status and label length features are configurable via web user interface only.
Line key features are explained in the following subchapters in detail:

Line

Speed Dial

Voice Mail

Directed Pickup

Group Pickup

DTMF

Prefix

Local Group

XML Group

XML Brower

LDAP

Conference

Forward

Transfer

Hold

DND

SMS

Group Listening

Zero Touch

URL

Keypad Lock

Directory
For more information, contact your system administrator.
Line
You can use this key feature to accept the incoming calls, place active calls on hold or
resume a held call. It performs the same as a hard line key.
Dependencies: Type (Line)
Account ID (the account this feature will be applied to)
Value (Default/Lock/Float)
Usage: When the phone receives an incoming call, the DSS key LED flashes green:
63
User Guide for the SIP-T46G IP Phone
1.
Press the DSS key to accept the incoming call.
2.
Press the DSS key to place the active call on hold.
3.
Press the DSS key again to resume the held call.
If you select Lock from the Value field, the line keys located in the same position of the
other page will be automatically assigned Line feature with Lock filled in the Value field.
Then you can use this key on every page. This feature is only applicable to line key 1-9.
If you select Float from the Value field, the phone will automatically switch to the page
the line key located, when the line key receives an incoming call.
Speed Dial
You can use this key feature to speed up dialing the numbers often used or hard to
remember.
Dependencies: Type (Speed Dial)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the number you want to dial out)
Usage: Press the DSS key to dial out the number specified in the Value field, using the
account selected from the Account ID field.
Voice Mail
You can use this key feature to connect voice mail quickly. For more information, refer to
Voice Mail on page 137.
Dependencies: Type (Key Event)
Key Event (Voice Mail)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the voice mail access code)
Usage: Press the DSS key to dial out the voice mail access code, you can follow the
voice prompt to listen to the voice mails.
Directed Pickup
You can use this key feature to answer someone else’s incoming call on the phone.
Dependencies: Type (Key Event)
Key Event (Directed Pickup)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the directed pickup code followed by the specific phone
number)
Usage: Press the DSS key on your phone when the specific phone number receives an
incoming call. The call is answered on your phone.
64
Customizing Your Phone
Group Pickup
You can use this key feature to answer incoming calls in a group that is associated with
their own group.
Dependencies: Type (Key Event)
Key Event (Group Pickup)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the group pickup feature code)
Usage: Press the DSS key on your phone when a phone number in the group receives
an incoming call. The call is answered on your phone.
DTMF
You can use this key feature to send the specification of arbitrary key sequences via
DTMF.
Dependencies: Type (Key Event)
Key Event (DTMF)
Label (key label displayed on the LCD screen)
Value (DTMF sequence)
Note
DTMF sequence can only contain "0-9", "*", "#" and "A-D".
Usage: Press the DSS key during an active call to send the key sequence specified in the
Value field.
Prefix
You can use this key feature to add a specified prefix number before the dialed number.
Dependencies: Type (Key Event)
Key Event (Prefix)
Label (key label displayed on the LCD screen)
Value (the prefix number)
Usage: Press the DSS key when the phone is idle, then the phone will enter into the
dialing screen and display the prefix number which you specified in the Value field. You
can enter other digits and then dial out.
Local Group
You can use this key feature to access the contact group in the local directory quickly.
For more information, refer to Local Directory on page 35.
Dependencies: Type (Key Event)
Key Event (Local Group)
65
User Guide for the SIP-T46G IP Phone
Local Group (the contact group name you want to access)
Label (key label displayed on the LCD screen)
Usage: Press the DSS key to access the contact group specified in the Local Group field.
XML Group
You can use this key feature to access remote group in your corporate directory quickly.
You should configure remote phone book in advance. For more information, refer to
Remote Phone Book on page 49.
Dependencies: Type (Key Event)
Key Event (XML Group)
XML Group (the remote group name you want to access if remote
phone book is configured)
Label (key label displayed on the LCD screen)
Usage: Press the DSS key to access the remote group specified in the XML Group field.
XML Browser
You can use this key feature to access the XML browser quickly. The XML browser allows
you to create custom services which meet your functional requirements on the server.
You can customize practical applications, such as weather report, stock information,
Google search, etc.
Dependencies: Type (Key Event)
Key Event (XML Browser)
Label (key label displayed on the LCD screen)
Value (the access URL for XML browser)
Usage: Press the DSS key to access the XML browser specified in the Value field.
LDAP
You can use this key feature to access the LDAP search interface quickly.
Dependencies: Type (Key Event)
Key Event (LDAP)
Label (key label displayed on the LCD screen)
Usage:
1.
Press the DSS key to access the LDAP search interface.
2.
Enter a few continuous characters of the contact name or continuous numbers of the
contact number using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen.
66
Customizing Your Phone
Conference
You can use this key feature to set up a conference call. For more information, refer to
Conference on page 107.
Dependencies: Type (Key Event)
Key Event (Conference)
Label (key label displayed on the LCD screen)
Value (the number you want to add to the conference)
Usage: Press the DSS key during an active call to set up a conference with the number
specified in the Value field.
Note
When leaving the Value field blank, the DSS key performs the same as the Conference
soft key during a call.
Forward
You can use this key feature to forward an incoming call to someone else. For more
information, refer to Call Forward on page 98.
Dependencies: Type (Key Event)
Key Event (Forward)
Label (key label displayed on the LCD screen)
Value (the number you want to forward to)
Usage:
1.
Press the DSS key to forward an incoming call to the number specified in the Value
field.
2.
When call forward is in phone mode, press the DSS key to activate call forward for
the phone.
3.
When call forward is in custom mode, press the DSS key to access the custom call
forward interface. You can activate or deactivate call forward for one or all
accounts.
Note
If the Value field is left blank, the DSS key performs the same as the Forward soft key
when receiving an incoming call.
When call forward is activated, the forward key LED will illuminate solid green.
Transfer
You can use this key feature to handle the call differently depending on the transfer
mode on DSS key when there is an active call on the phone.
Dependencies: Type (Key Event)
Key Event (Transfer)
Label (key label displayed on the LCD screen)
67
User Guide for the SIP-T46G IP Phone
Value (the number you want to transfer to)
Usage:
When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete

the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial

out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode on DSS key is New Call, press the DSS key to place a new

call to the number specified in the Value field.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode Via Dsskey.
Note
When leaving the Value field blank, the DSS key performs the same as the TRANSFER key
or the Transfer soft key during a call. For more information, refer to Call Transfer on page
105.
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies: Type (Key Event)
Key Event (Hold)
Label (key label displayed on the LCD screen)
Usage:
1.
Press the DSS key during an active call to place the call on hold.
2.
Press the DSS key again to retrieve the held call.
DND
You can use this key feature to activate or deactivate DND. You can also use this key
feature to access the custom DND interface. For more information, refer to Do Not
Disturb (DND) on page 94.
Dependencies: Type (Key Event)
Key Event (DND)
Label (key label displayed on the LCD screen)
Usage:
When DND is in phone mode:
68
1.
Press the DSS key to activate DND.
2.
Press the DSS key again to deactivate DND.
Customizing Your Phone
When DND is in custom mode:
1.
Press the DSS key to access the custom DND interface. You can activate or
deactivate DND for one or all accounts.
Note
When DND is activated, the DND key LED will illuminate solid green, and the incoming
calls will be rejected automatically.
SMS
You can use this key feature to access text message quickly. For more information, refer
to Short Message Service (SMS) on page 134.
Dependencies: Type (Key Event)
Key Event (SMS)
Label (key label displayed on the LCD screen)
Usage: Press the DSS key when the phone is idle to access text message.
Group Listening
You can use this key feature to activate the Speakerphone and Handset/Headset mode
at the same time. It is suitable for the group conversation which has more than one
person at one side. You are able to speak and listen through the handset/headset,
meanwhile the others nearby can only listen through the speaker.
Dependencies: Type (Key Event)
Key Event (Group Listening)
Label (key label displayed on the LCD screen)
Usage:
1.
During a call, press the DSS key to activate the group listening mode.
You can then speak and listen through the handset/headset, other people at your
side can listen through speaker at the same time.
2.
Press the DSS key again to deactivate the group listening mode.
Zero Touch
You can use this key feature to configure auto provision and network parameters quickly.
Dependencies: Type (Key Event)
Key Event (Zero Touch)
Label (key label displayed on the LCD screen)
Usage:
1.
Press the DSS key to access the zero touch screen.
2.
Press the OK soft key within a few seconds.
3.
Configure the network parameters in the corresponding fields.
4.
Press the Next soft key.
5.
Configure the auto provision parameters in the corresponding fields.
69
User Guide for the SIP-T46G IP Phone
6.
Press the OK soft key.
The phone will reboot to update configurations.
URL
You can use this key feature to trigger the phone to send an HTTP GET request
containing a specific URL.
Dependencies: Type (URL)
Label (key label displayed on the LCD screen)
URL (the URL contained in the HTTP GET request)
Usage: Press the DSS key to trigger the phone to send an HTTP GET request containing
the URL specified in the URL field.
Keypad Lock
You can use this key feature to immediately lock the keypad of your phone instead of
long pressing
. For more information, refer to Keypad Lock on page 27.
Dependencies: Type (Key Event)
Key Event (Keypad Lock)
Label (key label displayed on the LCD screen)
Usage: Press the DSS key to immediately lock the keypad of your phone instead of long
pressing
.
Directory
You can use this key feature to easily access frequently used lists. For more information,
refer to Directory on page 33.
Dependencies: Type (Key Event)
Key Event (Directory)
Label (key label displayed on the LCD screen)
Usage: Press the DSS key to immediately access to frequently used lists.
Note
The DSS key performs the same function as the Directory soft key when the phone is idle.
You can customize the soft keys, navigation keys and function keys.
To customize the programmable keys via web user interface:
1.
70
Click on DSSKey->Programable Key.
Customizing Your Phone
Note
2.
Customize specific features for these keys.
3.
Click Confirm to accept the change.
Programmable keys are configurable via web user interface only.
You can register one or multiple accounts on the SIP-T46G IP phone. You can also
configure each line key to associate with an account or configure multiple line keys to
associate with an account.
To register an account via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Account.
2.
Select the desired account and then press the Enter soft key.
3.
Select Enabled from the Account Status field.
4.
Enter the desired values in Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 fields respectively. Contact your system administrator
for more information.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
You can repeat steps 2 to 5 to register more accounts.
71
User Guide for the SIP-T46G IP Phone
The following figures show single or multiple accounts registered on the phone:
Single account:
Multiple accounts:
To disable an account via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Account.
2.
Select the desired account and then press the Enter soft key.
3.
Select Disabled from the Account Status field.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
Registering an account is configurable via web user interface at the path
Account->Register.
You can configure multiple line keys to associate with an account. This enhances call
visualization and simplifies call handling.
72
Customizing Your Phone
If this is the case, the LCD screen resembles the following figure:
Incoming calls to this account will be distributed evenly among the available line keys.
Outgoing calls will be distributed similarly.
Your phone can be configured to have a combination of accounts with a single line key
and accounts with multiple line keys.
Dial plan is a string of characters that governs the way your SIP-T46G IP phone
processes the inputs received from your phone keypad. The SIP-T46G IP phone supports
the following dial plan features:

Replace Rule

Dial-now

Area Code

Block Out
Basic expression syntaxes you need to know:
Syntax
Description
The dot "." can be used as a placeholder or multiple placeholders for
.
any character. Example:
"12." would match "123", "1234", "12345", "12abc", etc.
x
An "x" can be used as a placeholder for any character. Example:
"12x" would match "121", "122", "123", "12a", etc.
The square brackets "[]" can be used as a placeholder for a single
[]
character which matches any of a set of characters. Example:
"91[5-7]1234" would match "9151234", "9161234", "9171234", etc.
The parentheses "( )" can be used to group together patterns, for
()
instance, to logically combine two or more patterns. Example:
"([1-9])([2-7])3" would match "923", "153", "773",etc.
73
User Guide for the SIP-T46G IP Phone
Syntax
Description
The “$” should be followed by the sequence number of a parenthesis.
The “$” plus the sequence number means the whole character or
characters placed in the parenthesis. The number directs to the right
$
parenthesis when there are more than one. Example:
A replace rule configuration: Prefix: "9([5-7])(.)", Replace: "5$2". When
you enter "96123" to dial out on your phone, the number will be replaced
as "5123" and then dialed out. “$2” means the characters in the second
parenthesis, that is, “123”.
You can configure one or more replace rules (up to 100) to remove the specified string
and replace it with another string. You can configure a pattern with wildcards (refer to
the expression syntax in the table above), so that any string that matches the pattern
will be replaced. This feature is convenient for you to dial out a long number. For
example, a replace rule is configured as "Prefix: 1" and "Replace: 1234567", when you try
to dial out the number “1234567”, you just need to enter “1” on the phone and then
press the Send soft key.
To add a replace rule via web user interface:
74
1.
Click on Settings->Dial Plan->Replace Rule.
2.
Enter the string (e.g., 2xx) in the Prefix field.
3.
Enter the string (e.g., 12345) in the Replace field.
4.
Enter the desired line ID in the Account field or leave it blank.
5.
Click Add to add the replace rule.
Customizing Your Phone
When you enter the number “234” using the keypad and then press the Send soft
key, the phone will dial out “12345” instead.
Note
Valid values of Account field can be one or more digits among 1, 2, 3, 4, 5 and 6. Every
two digits must be separated by a “,”. For example, when you enter the value “1, 2” in
the Account field, this replace rule will apply to account1 and account2.
If you leave the Account field blank or enter 0, then the replace rule will apply to all
accounts.
To edit a replace rule via web user interface:
1.
Click on Settings->Dial Plan->Replace Rule.
2.
Select the desired replace rule by checking the checkbox.
3.
Edit the values in the Prefix and Replace fields.
4.
Enter the desired line ID in the Account field or leave it blank.
5.
Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1.
Click on Settings->Dial Plan->Replace Rule.
2.
Select the one or more replace rules by checking the checkbox(es).
3.
Click Del to delete the replace rule(s).
Note
Replace rule is configurable via web user interface only.
You can configure one or more dial-now rules (up to 100) on your phone. When the
dialed number matches the dial-now string, the number will be dialed out automatically.
For example, a dial-now rule is configured as "2xx", then any entered three-digit string
beginning with 2 will be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1.
Click on Settings->Dial Plan->Dial-now.
2.
Enter the desired value (e.g., 1234) in the Rule field.
3.
Enter the desired line ID in the Account field or leave it blank.
75
User Guide for the SIP-T46G IP Phone
For more information on the valid value of the Account field, refer to Replace Rule
on page 74.
4.
Click Add to add the dial-now rule.
When you enter the number “1234” using the keypad, the phone will dial out “1234”
automatically without pressing any key.
Note
You can also edit or delete the dial-now rule, refer to Replace Rule on page 74 for more
information.
Dial-now rule is configurable via web user interface only.
Delay Time for Dial-Now Rule
You can configure the delay time for dial-now rules. That is, you can configure your
phone to dial out the phone number automatically, which matches a dial-now rule, after
the specified delay time.
To configure the delay time for dial-now rule via web user interface:
1.
76
Click on Features->General Information.
Customizing Your Phone
2.
Enter the time within 1-14 (in seconds) in the Time-Out for Dial-Now Rule field.
3.
Click Confirm to accept the change.
Note
Delay time for dial-now rule is configurable via web user interface only.
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing the number
outside the code area. For example, area code is configured as "Code: 011, Min Length:
4, Max Length: 11". When you dial out the number "56789" (the length of the number is
between 4 and 11), the phone will add the area code and dial out the number
"01156789".
To configure the area code and lengths via web user interface:
1.
Click on Settings->Dial Plan->Area Code.
2.
Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
3.
Enter the desired line ID in the Account field or leave it blank.
77
User Guide for the SIP-T46G IP Phone
For more information on the valid value of the Account field, refer to Replace Rule
on page 74.
4.
Note
Click Confirm to accept the change.
The default values of minimum and maximum length are 1 and 15 respectively.
Area code is configurable via web user interface only.
You can block some specific numbers (up to 10) from being dialed on your phone. When
you dial a block out number on your phone, the dialing will fail and the LCD screen will
prompt "Forbidden Number".
To add a block out number via web user interface:
78
1.
Click on Settings->Dial Plan->Block Out.
2.
Enter the desired value in the BlockOut Number field.
3.
Enter the desired line ID in the Account field or leave it blank.
Customizing Your Phone
For more information on the valid value of the Account field, refer to Replace Rule
on page 74.
4.
Note
Click Confirm to add the block out number.
Block out number is configurable via web user interface only.
Public telephone networks in countries around the world have a single emergency
telephone number (emergency services number), that allows a caller to contact local
emergency services for assistance when necessary. The emergency telephone number
may differ from country to country. It is typically a three-digit number so that it can be
easily remembered and dialed quickly. Some countries have a different emergency
number for each of the different emergency services.
You can specify the emergency telephone numbers on the IP phone for contacting the
emergency services in an emergency situation.
Note
Contact your local phone service provider for available emergency numbers in your
area.
To specify emergency numbers via web user interface:
1.
Click on Features->Phone Lock.
2.
Enter the emergency number in the Emergency field.
79
User Guide for the SIP-T46G IP Phone
For multiple emergency numbers, enter a comma between every two numbers. The
default emergency numbers are 110, 911 and 120.
3.
Note
Click Confirm to accept the change.
Emergency number is configurable via web user interface only.
You can enable live dialpad on the SIP-T46G IP phone, which enables the IP phone to
automatically dial out the phone number without pressing any other key. You can also
configure a delay, where the phone will dial out the phone number automatically after
the specified period of time.
To enable the live dialpad via web user interface:
80
1.
Click on Settings->Preference.
2.
Select Enabled from the pull-down list of Live Dialpad.
Customizing Your Phone
3.
Enter the desired delay time in the Inter Digit Time (1~14s) field.
The default delay time is 4s.
4.
Note
Click Confirm to accept the change.
Live dialpad is configurable via web user interface only.
You can dial a hotline number immediately upon lifting the handset, pressing the
speakerphone key or the line key. You can also configure a delay, where the phone will
dial out the hotline number automatically after the specified period of time.
To configure the hotline number via phone user interface:
1.
Press Menu->Call Features->Others->Hotline.
2.
Enter the desired number in the Number field.
3.
Enter the delay time in the Hotline Delay 0-10(s) field.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
81
User Guide for the SIP-T46G IP Phone
Hotline is configurable via web user interface at the path Features->General
Information.
82
Basic Call Features
The SIP-T46G IP phone is designed to be easily used like a regular phone on a public
switched telephone network (PSTN). You can place calls, answer calls, transfer a call to
someone else, or conduct a conference call.
This chapter provides basic operating instructions for the SIP-T46G IP phone. Topics
include:

Placing Calls

Answering Calls

Ending Calls

Redialing Numbers

Recent Call In Dialing

Auto Answer

Auto Redial

Call Completion

Call Return

Call Mute

Call Hold/Resume

Do Not Disturb (DND)

Call Forward

Call Transfer

Call Waiting

Conference

Call Park

Call Pickup

Anonymous Call

Anonymous Call Rejection
If you require additional information or assistance with your new phone, contact your
system administrator.
You can place a call in three ways using your SIP-T46G IP phone:

Using the handset
83
User Guide for the SIP-T46G IP Phone

Using the speakerphone

Using the headset
You can also dial the number first, and then choose the way you want to speak to the
other party.
You can also search and dial a contact from call history, local directory or remote phone
book. For more information, refer to Contact Management on page 33 and Call History
Management on page 51.
During a call, you can alternate between Speakerphone, Headset, and Handset modes
by pressing the Speakerphone key, the HEADSET key, or picking up the handset.
The call duration of active calls is visible on the LCD screen. In the figure below, the call
to the number”1000” has lasted 40 seconds.
To place a call using the handset:
1.
Pick up the handset.
2.
Enter the desired number using the keypad.
3.
Press
,
, or the Send soft key.
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither. For more information, refer to the Key as Send on page 26.
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone,
press the OK key. The maximum length of SIP URI or IP address length is 32 characters.
For example, SIP URI: 3606@sip.com, IP: 192.168.1.15.
Note
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
To place a call using the hands-free speakerphone mode:
Do one of the following:
-
With the handset on-hook, press
or the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
84
,
or the Send soft key.
Basic Call Features
-
With the handset on-hook, enter the desired number using the keypad.
Press
,
,
or the Send soft key.
To place a call using the headset:
Do one of the following:
-
With the optional headset connected, press
to activate the headset mode.
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
-
,
, or the Send soft key.
With the optional headset connected, press
to activate the headset mode.
Enter the desired number using the keypad.
Press
Note
,
, or the Send soft key.
To permanently use the headset mode, refer to Headset Prior on page 54.
To place multiple calls:
You can have more than one call on your SIP-T46G IP phone. To place a new call during
an active call, do one of the following:
-
Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press
-
,
Press
, or the Send soft key.
or the Hold soft key to place the original call on hold.
Press the New Call soft key.
Enter the desired number using the keypad.
Press
You can press
,
, or the Send soft key.
or
to switch between calls, and then press the Resume soft key
to retrieve the desired call.
When you are not in another call, you can answer a call in three ways:

Using the handset

Using the speakerphone
85
User Guide for the SIP-T46G IP Phone
Using the headset

Note
You can ignore incoming calls by pressing the X key, the Reject soft key or the Silence soft
key. You can also activate Do Not Disturb mode to ignore the incoming calls without ring
on your phone. For more information, refer to Do Not Disturb (DND) on page 94.
You can forward incoming calls to someone else by pressing the Forward soft key. For
more information, refer to Call Forward on page 98.
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1.
Pick up the handset.
To answer a call using the hands-free speakerphone mode:
Do one of the following:
-
Press
.
-
With the handset on-hook and the headset mode deactivated, press the Answer
soft key.
-
With the handset on-hook and the headset mode deactivated, press the line key
(the line key LED flashes green).
To answer a call using the headset:
Do one of the following:
-
Press
.
-
With the headset mode activated, press the Answer soft key.
-
With the headset mode activated, press the line key (the line key LED flashes
green).
Answering When in Another Call
If you have an active call, and an incoming call arrives on the phone, do one of the
following:
-
Press the Answer soft key.
The incoming call is answered and the original call is placed on hold.
-
Press
to access the new call.
Press
or the Answer soft key.
The incoming call is answered and the original call is placed on hold.
86
Basic Call Features
To end a call:
Do one of the following:
Note
-
If you are using the handset, press the End Call soft key or hang up the handset.
-
If you are using the headset, press the End Call soft key.
-
If you are using the speakerphone, press
or the End Call soft key.
To end a call placed on hold, you can press the End Call soft key to end the call directly,
or press the Resume soft key to resume the call before ending it.
To redial the last dialed number from your phone:
1.
Press
twice.
A call to your last dialed number is attempted.
To redial a previously dialed number from your phone:
1.
Press
2.
Press
press
when the phone is idle.
or
to select the desired entry from the placed calls list, and then
or the Send soft key.
To view the placed calls list when the phone is in the pre-dialing interface, you should
enable recent call in dialing in advance.
To enable recent call in dialing via web user interface:
1.
Click on Directory->Setting.
87
User Guide for the SIP-T46G IP Phone
2.
Select Enabled from the pull-down list of Recent Call In Dialing.
3.
Click Confirm to accept the change.
Note
Recent call in dialing is configurable via web user interface only.
To view placed calls list when the phone is in the pre-dialing interface:
1.
Pick up the handset, press the speakerphone key or press the line key.
The LCD screen displays the placed calls list.
You can use auto answer to automatically answer an incoming call on a line. Auto
answer is configurable on a per-line basis.
To configure auto answer via phone user interface:
1.
88
Press Menu->Call Features->Auto Answer.
Basic Call Features
2.
Select the desired line and then press the Enter soft key.
3.
Press
or
, or the Switch soft key to select Enabled from the Auto Answer
field.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
The
icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer is only applicable when there is no other call in progress on the phone.
You can enable auto redial to redial the phone number automatically when the called
party is busy. You can also configure the times settings for auto redial and the time to
wait between redial attempts.
To configure auto redial via phone user interface:
1.
Press Menu->Call Features->Others->Auto Redial.
2.
Press
or
, or the Switch soft key to select Enabled from the Auto Redial
field.
3.
Enter the desired time (in seconds) in the Redial Interval field.
The default time interval (in seconds) is 10.
4.
Enter the desired times in the Redial Times field.
89
User Guide for the SIP-T46G IP Phone
The default value is 10.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General
Information.
To use auto redial:
When the called party is busy, the LCD screen prompts the following:
1.
Press the OK soft key to activate auto redial. The following prompt will appear on
the LCD screen of the phone:
2.
Wait for a period of time or press the OK soft key to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
90
Basic Call Features
You can use call completion to notify the caller who failed to reach a desired callee
when the callee becomes available to receive a call.
To configure call completion via phone user interface:
1.
Press Menu->Call Features->Others->Call Completion.
2.
Press
or
, or the Switch soft key to select Enabled from the Call Completion
field.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
Call completion is configurable via web user interface at the path Features->General
Information.
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
1.
Press the OK soft key, the phone returns to the idle screen and call completion is
activated.
91
User Guide for the SIP-T46G IP Phone
2.
When the called party becomes idle, the LCD screen prompts the following:
3.
Press the OK soft key to redial the number.
Note
Call completion is not available on all servers. For more information, contact your system
administrator.
You can press a call return key to place a call back to the last incoming call.
To configure a call return key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select a desired DSS key.
3.
Press
or
, or the Switch soft key to select Key Event from the Type field.
4.
Press
or
, or the Switch soft key to select Call Return from the Key Event
field.
5.
(Optional.) Enter a string that will appear on the LCD screen in the Label field.
6.
Press the Save soft key to accept the change or the Back soft key to cancel.
Call return key is configurable via web user interface at the path DSSKey->Line key.
92
Basic Call Features
You can mute the microphone of the active audio device during an active call, and then
the other party cannot hear you.
To mute a call:
1.
Press
during an active call.
The LCD screen indicates that the call is on mute. The mute key LED illuminates solid
red when the call is on mute.
To un-mute a call:
1.
Press
again to un-mute the call.
You can place an active call on hold. Only one active call can be in progress at any time.
Other calls can be made and received while placing the original call on hold. When you
place a call on hold, your IP PBX may play music on hold to the other party while
waiting.
To place a call on hold:
1.
Press
or the Hold soft key during a call.
The LCD screen indicates that the call is on hold.
93
User Guide for the SIP-T46G IP Phone
The line key LED flashes green. The phone will beep softly every 30 seconds to remind
you that you still have a call on hold.
To resume a held call:
1.
Press
or the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
-
Press
or
to switch between the calls, and then press the Resume soft key
to retrieve the desired call.
-
Press the corresponding line key to retrieve the call.
If more than two calls are on hold, a numbered prompt appears on the LCD screen, for
example "2/4", indicating that this is the second call out of four calls.
You can use DND to reject incoming calls automatically on the phone. Callers will
receive a busy message.
You can enable/disable DND for the phone system, or you can customize DND for each
or all accounts. Two DND modes:

Phone (default): DND is effective for the phone system.

Custom: DND can be configured for each or all accounts.
You can receive incoming calls from authorized numbers when DND is enabled.
To configure the DND mode via web user interface:
1.
94
Click on Features->Forward & DND.
Basic Call Features
Note
2.
In the DND block, mark the desired radio box in the Mode field.
3.
Click Confirm to accept the change.
DND mode is configurable via web user interface only.
To activate DND in phone mode:
1.
Press the DND soft key when the phone is idle.
The
icon on the idle screen indicates that DND is enabled.
Incoming calls will be rejected automatically and "n New Missed Call(s)" ("n"
indicates the number of the missed calls) will appear on the LCD screen.
To activate DND in custom mode for a specific account:
1.
Press the DND soft key when the phone is idle.
95
User Guide for the SIP-T46G IP Phone
The LCD screen displays a list of accounts on the phone.
2.
Press
or
to select the desired account.
3.
Press
or
soft key to select On to activate DND.
4.
Press the Save soft key to accept the change.
The
to
icon appears on the idle screen, and the associated line icon changes
.
Incoming calls on the specific line will be rejected automatically, and the LCD
screen will prompt "n New Missed Call(s)" ("n" indicates the number of the missed
calls).
To activate DND in custom mode for all accounts:
1.
Press the DND soft key when the phone is idle.
The LCD screen displays a list of accounts registered on the phone.
2.
96
Press the All On soft key to activate DND for all accounts.
Basic Call Features
3.
Press the Save soft key to accept the change.
The
icon appears on the idle screen, and all line icons change to
.
Incoming calls will be rejected automatically, and the LCD screen will prompt "n
New Missed Call(s)" ("n" indicates the number of the missed calls).
Note
The prompt message displays only if Missed Call Log for the line is enabled. Missed call
log is configurable via web user interface at the path Account->Basic.
Do not disturb is local to the phone, and may be overridden by the server settings. For
more information, contact your system administrator.
To configure the DND authorized numbers via web user interface:
1.
Click on Features->Forward & DND.
2.
Select Enabled from the pull-down list of DND Emergency.
97
User Guide for the SIP-T46G IP Phone
3.
Enter the numbers in the DND Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4.
Click Confirm to accept the change.
When DND is enabled on the phone, the phone can still receive incoming calls from the
numbers specified in the DND Authorized Numbers field.
Note
DND authorized number is configurable via web user interface only.
You can configure your phone to forward incoming calls to another party by the static
forwarding. You can also forward calls while your phone is ringing, refer to the dynamic
forwarding.
Static Forwarding
Three types of static forwarding:

Always Forward: Incoming calls are immediately forwarded.

Busy Forward: Incoming calls are immediately forwarded if the phone is busy.

No Answer Forward: Incoming calls are forwarded if not answered after a period
of time.
You can enable/disable call forward for the phone system, or you can customize call
98
Basic Call Features
forward for each or all accounts. Two call forward modes:

Phone (default): Call forward is effective for the phone system.

Custom: Call forward can be configured for each or all accounts.
To configure the call forward mode via web user interface:
Note
1.
Click on Features->Forward & DND.
2.
In the Forward block, mark the desired radio box in the Mode field.
3.
Click Confirm to accept the change.
Call forward mode is configurable via web user interface only.
To enable call forward in phone mode:
1.
Press Menu->Call Features->Call Forward.
2.
Press
or
to select the desired forwarding type, and then press the Enter
soft key.
3.
Depending on your selection:
a.)
If you select Always Forward:
1)
Press
or
, or the Switch soft key to select Enabled from the Always
Forward field.
2)
Enter the destination number you want to forward all incoming calls to in
the Forward To field.
99
User Guide for the SIP-T46G IP Phone
3)
(Optional.) Enter the always forward on code or off code respectively in the
On Code or Off Code field.
b.)
If you select Busy Forward:
1)
Press
or
, or the Switch soft key to select Enabled from the Busy
Forward field.
2)
Enter the destination number you want to forward incoming calls to when
the phone is busy in the Forward To field.
3)
(Optional.) Enter the busy forward on code or off code respectively in the
On Code or Off Code field.
c.)
If you select No Answer Forward:
1)
Press
or
, or the Switch soft key to select Enabled from the No
Answer Forward field.
2)
Enter the destination number you want to forward unanswered incoming
calls to in the Forward To field.
3)
Press
or
, or the Switch soft key to select the ring time to wait
before forwarding from the After Ring Time field.
The default ring time is 12 seconds.
100
Basic Call Features
4)
(Optional.) Enter the no answer forward on code or off code respectively in
the On Code or Off Code field.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
The
icon on the idle screen indicates the call forward is enabled.
To enable call forward in custom mode:
1.
Press Menu->Call Features->Call Forward.
2.
Press
or
to select the desired account, and then press the Enter soft key.
3.
Press
or
to select the desired forwarding type, and then press the Enter
soft key.
4.
Depending on your selection:
a.)
If you select Always Forward, you can enable it for a specific account.
1)
Press
or
, or the Switch soft key to select Enabled from the Always
Forward field.
2)
Enter the destination number you want to forward all incoming calls to in
the Forward To field.
3)
(Optional.) Enter the always forward on code or off code respectively in the
On Code or Off Code field.
You can also enable always forward for all accounts. After always forward was
enabled for a specific account, do the following:
1)
Press
or
to highlight the Always Forward field.
2)
Press the All Lines soft key.
101
User Guide for the SIP-T46G IP Phone
The LCD screen prompts “Copy to all lines?”.
3)
b.)
Press the OK soft key to accept the change or the Cancel soft key to cancel.
If you select Busy Forward, you can enable it for a specific account.
1)
Press
or
, or the Switch soft key to select Enabled from the Busy
Forward field.
2)
Enter the destination number you want to forward incoming calls to when
the phone is busy in the Forward To field.
3)
(Optional.) Enter the busy forward on code or off code respectively in the
On Code or Off Code field.
You can also enable busy forward for all accounts. After busy forward was
enabled for a specific account, do the following:
1)
102
Press
or
to highlight the Busy Forward field.
Basic Call Features
2)
Press the All Lines soft key.
The LCD screen prompts “Copy to all lines?”.
3)
c.)
Press the OK soft key to accept the change or the Cancel soft key to cancel.
If you select No Answer Forward, you can enable it for a specific account.
1)
Press
or
, or the Switch soft key to select Enabled from the No
Answer Forward field.
2)
Enter the destination number you want to forward unanswered incoming
calls to in the Forward To field.
3)
Press
or
, or the Switch soft key to select the ring time to wait
before forwarding from the After Ring Time field.
The default ring time is 12 seconds.
4)
(Optional.) Enter the no answer forward on code or off code respectively in
the On Code or Off Code field.
You can also enable no answer forward for all accounts. After no answer
forward was enabled for a specific account, do the following:
1)
Press
or
to highlight the No Answer Forward field.
103
User Guide for the SIP-T46G IP Phone
2)
Press the All Lines soft key.
The LCD screen prompts “Copy to all lines?”.
3)
5.
Press the OK soft key to accept the change or the Cancel soft key to cancel.
Press the Save soft key to accept the change or the Back soft key to cancel.
The
icon appears on the idle screen, and the associated line icon changes to
.
Call forward is configurable via web user interface at the path Features->Forward &
DND.
Note
You can also enter the SIP URL or IP address in the Forward To field. For more information
on using the SIP URL or IP address, refer to Placing Calls on page 83.
Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,
contact your system administrator.
To disable call forward in phone mode:
Do one of the following:
-
Press
-
Press Menu->Call Features->Call Forward.
Press
when the phone is idle.
or
to select the desired forwarding type, then press the Enter soft
or
, or the Switch soft key to select Disabled to disable the call
key.
Press
forward.
Press the Save soft key to accept the change.
To disable call forward in custom mode for a specific account:
1.
Press Menu->Call Features->Call Forward or press
when the phone is idle.
2.
Press
or
to select the desired account, then press the Enter soft key.
3.
Press
or
to select the desired forwarding type, then press the Enter soft
or
, or the Switch soft key to select Disabled to disable the call
key.
4.
104
Press
Basic Call Features
forward.
5.
Press the Save soft key to accept the change.
Dynamic Forwarding
To forward an incoming call to another party:
1.
When the phone is ringing, press the Forward soft key.
2.
Enter the number you want to forward the incoming call to.
3.
Press
,
, or the Send soft key.
The LCD screen prompts a call forward message.
You can transfer a call to another party in one of the three ways:

Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1.
Press
or the Transfer soft key during a call.
2.
Enter the number you want to transfer the call to.
3.
Press
to complete the transfer.
105
User Guide for the SIP-T46G IP Phone
Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1.
Press
2.
Do one of the following:
-
or the Transfer soft key during a call.
Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to Directory on page 33 for more information).
-
Press the Directory soft key, and then select Local Calllog. Select the desired
list and press
or
to select the entry (Directory should be configured in
advance. Refer to Directory on page 33 for more information).
-
Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to Directory on page 33 and Remote Phone Book on page 49 for
more information).
3.
Press
4.
Press
or
to dial out.
or the Transfer soft key to complete the transfer when receiving
ringback.
To perform an attended transfer:
1.
Press
or the Transfer soft key during a call.
2.
Do one of the following:
-
Enter the number you want to transfer the call to.
-
Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to Directory on page 33 for more information).
Press the Directory soft key, and then select Local Calllog. Select the desired
-
list and press
or
to select the entry (Directory should be configured in
advance. Refer to Directory on page 33 for more information).
-
Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to Directory on page 33 and Remote Phone Book on page 49
for more information).
3.
Press
or
to dial out.
4.
After the party answers the call, press
or the Transfer soft key to complete the
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
106
Basic Call Features
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is an active call on the phone. Otherwise, another
incoming call is automatically rejected by the phone with a busy message when there is
an active call on the phone. You can also enable or disable the phone to play a warning
tone when receiving another call.
To configure call waiting via phone user interface:
1.
Press Menu->Call Features->Call Waiting.
2.
Press
or
, or the Switch soft key to select Enabled from the Call Waiting
or
, or the Switch soft key to select Enabled from the Play Tone field.
field.
3.
4.
Press
(Optional.) Enter the call waiting on code or off code respectively in the On Code
or Off Code field.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path Features->General
Information.
You can create a conference with two parties using the phone’s local conference. You
can create a conference between an active call and a call on hold by pressing the
Conference soft key. The SIP-T46G also supports network conference.
Note
Network conference is not available on all servers. For more information, contact your
system administrator.
The SIP-T46G IP phone supports up to 3 parties (including yourself) in a conference call.
107
User Guide for the SIP-T46G IP Phone
This is the default method of conference called Local Conference.
To set up a local conference call:
1.
Place a call to the first party.
2.
When the first party answers the call, press the Conference soft key to place a new
call.
The active call is placed on hold.
3.
Enter the number of the second party and press
,
, or the Send soft key.
4.
When the second party answers the call, press the Conference soft key again to join
all parties in the conference.
To join two calls in a conference:
1.
Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2.
Press
or
to select the call for conference and make sure the call is active
(for example, select the call on account 1).
3.
Press the Conference soft key to join the two calls in the conference on the selected
account.
During the conference call, you can do the following:
108
-
Press
or the Hold soft key to place the conference on hold.
-
Press the Split soft key to split the conference call into two individual calls.
-
Press the Manage soft key, and then press
or
to select the desired party:
-
Press the Far Mute soft key to forbid the party from speaking.
-
Press the Remove soft key to remove the party from the conference call.
-
Press the Back soft key to return to the previous interface.
-
Press
to mute the conference call.
-
Press the End Call soft key to drop the conference call.
Basic Call Features
You can use network conference feature on the SIP-T46G IP phone to conduct a
conference with multiple participants.
This feature allows you to perform the following:

Join two calls together into a conference call.

Invite another party into an active conference call.
To use this feature, contact your system administrator for the network conference URI in
advance.
To configure network conference via web user interface:
1.
Click on Account->Advanced.
2.
Select Network Conference from the pull-down list of Conference Type.
3.
Enter the conference URI (e.g., conference@example.com) in the Conference URI
field.
4.
Note
Click Confirm to accept the change.
Network conference is configurable via web user interface only.
To set up a network conference call:
1.
Place a call to the first party.
2.
Press the Conference soft key to place a new call.
The active call is placed on hold.
109
User Guide for the SIP-T46G IP Phone
3.
Enter the number of the second party and press
,
, or the Send soft key.
4.
When the second party answers the call, press the Conference soft key to add the
second party to the conference.
5.
Press the Conference soft key to place a new call.
The conference is placed on hold.
6.
Enter the number of the new party and then press
,
, or the Send soft key.
7.
When the new party answers the call, press the Conference soft key to add the new
party to the conference.
8.
Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
You can use call park to place a call on hold, and then retrieve the call from another
phone in the system (for example, a phone in another office or conference room). You
can park an active call by pressing the call park key on the phone. If the call is parked
successfully, the response is either a voice prompt confirming that the call was parked,
or a visible prompt on the LCD screen.
Call park is not available on all servers. Contact your system administrator for more
information.
Note
To configure a call park key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
or
, or the Switch soft key to select Key Event from the Type field.
4.
Press
or
, or the Switch soft key to select Call Park from the Key Event field.
5.
Press
or
, or the Switch soft key to select the desired line from the Account
ID field.
6.
110
Enter the call park code in the Value field.
Basic Call Features
7.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
8.
Press the Save soft key to accept the change or the Back soft key to cancel.
Call park key is configurable via web user interface at the path DSSKey->Line Key.
To use call park:
1.
User on phone A places a call to phone B.
2.
User on phone A wants to take the call in a conference room for privacy, then
presses the call park key on phone A.
3.
User on phone A walks to an available conference room where the phone is
designated as phone C. The user dials the call park retrieve code to retrieve the
parked call.
The system establishes call between phone C and B.
Note
The call park code and call park retrieve code are predefined on the system server.
Contact your system administrator for more information.
If the parked call is not retrieved within a period of time assigned by the system, the
phone performing call park feature will receive call back.
You can use call pickup to answer someone else’s incoming call on the phone. The
SIP-T46G IP phone supports directed call pickup and group call pickup. Directed call
pickup is used for picking up a call that is ringing at a specific phone number. Group call
pickup is used for picking up a call that is ringing at any phone number in the group. The
pickup group should be predefined, contact your system administrator for more
information.
You can pick up an incoming call by using the DPickup/GPickup soft key. To use call
pickup, you need to configure the call pickup code beforehand on a global or per-line
basis via web user interface.
Note
If there are many incoming calls at the same time, pressing the GPickup soft key on the
phone will pick up the call that rings first.
111
User Guide for the SIP-T46G IP Phone
Directed Call Pickup
To enable directed call pickup and configure the directed call pickup code on a global
basis via web user interface:
1.
Click on Features->Call Pickup.
2.
Select Enabled from the pull-down list of Directed Call Pickup.
3.
Enter the directed call pickup code in the Directed Call Pickup Code field.
4.
Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
112
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
Basic Call Features
4.
Enter the directed call pickup code in the Directed Call Pickup Code field.
5.
Click Confirm to accept the change.
To pick up a call directly:
1.
Pick up the handset.
2.
The DPickup soft key appears on the LCD screen.
3.
Press the DPickup soft key on your phone when a phone receives an incoming call.
4.
Enter the phone number which receives an incoming call.
5.
Press the DPickup soft key again.
The call is answered on your phone.
You can also configure a DSS key as a directed pickup key via phone user interface or
web user interface. You can pick up a call by pressing the directed pickup key directly.
Group Call Pickup
To enable the group call pickup and configure the group call pickup code on a global
113
User Guide for the SIP-T46G IP Phone
basis via web user interface:
1.
Click on Features->Call Pickup.
2.
Select Enabled from the pull-down list of Group Call Pickup.
3.
Enter the group call pickup code in the Group Call Pickup Code field.
4.
Click Confirm to accept the change.
To configure the group call pickup code on a per-line basis via web user interface:
114
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
Basic Call Features
4.
Enter the group call pickup code in the Group Call Pickup Code field.
5.
Click Confirm to accept the change.
To pick up a call in the group:
1.
Pick up the handset.
2.
The GPickup soft key appears on the LCD screen.
3.
Press the GPickup soft key on your phone when a phone in the group receives an
incoming call.
The call is answered on your phone.
You can also configure a DSS key as group pickup key via phone user interface or web
user interface. You can pick up a call by pressing the group pickup key directly.
Note
The directed call pickup code and group call pickup code are predefined on the system
server. Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that
configured on a global basis.
115
User Guide for the SIP-T46G IP Phone
You can use anonymous call to block the identity and phone number from showing up to
the called party when you call someone. For example, you want to call to consult some
of the services, but don’t want to be harassed. Anonymous call is configurable on a
per-line basis. You can also configure the phone to send anonymous code to the server
to activate/deactivate anonymous call on the server side.
Note
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To configure anonymous call via phone user interface:
1.
Press Menu->Call Features->Anonymous.
2.
Select the desired line and then press Enter soft key.
3.
Press
or
, or the Switch soft key to select Enabled from the Local
Anonymous field.
4.
(Optional.) Press
or
, or the Switch soft key to select the desired value from
the Send Anonymous Code field.
5.
(Optional.) Enter the anonymous call on code in the On Code field.
6.
(Optional.) Enter the anonymous call off code in the Off Code field.
7.
Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call is configurable via web user interface at the path Account->Basic.
To place an anonymous call:
1.
116
Using the specific line on the phone to place a call to phone B.
Basic Call Features
The LCD screen of phone B prompts an incoming call from anonymity.
You can use anonymous call rejection to reject incoming calls from anonymous callers.
Anonymous call rejection automatically rejects incoming calls from callers who
deliberately block their identities and numbers from showing up. Anonymous call
rejection is configurable on a per-line basis.
To configure anonymous call rejection via phone user interface:
1.
Press Menu->Call Features->Anonymous.
2.
Select the desired line and then press Enter soft key.
3.
Press
or
to scroll to the Anonymous Rejection field.
4.
Press
or
, or the Switch soft key to select Enabled from the Anonymous
Rejection field.
5.
(Optional.) Enter the anonymous call rejection on code in the On Code field.
6.
(Optional.) Enter the anonymous call rejection off code in the Off Code field.
7.
Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call rejection is configurable via web user interface at the path
Account->Basic.
117
User Guide for the SIP-T46G IP Phone
118
Advanced Phone Features
This chapter provides operating instructions for the advanced features of the SIP-T46G IP
phone. Topics include:

Busy Lamp Field (BLF)

Call Recording

Hot Desking

Intercom

Multicast Paging

Music on Hold

Automatic Call Distribution (ACD)

Messages
If you require additional information or assistance with your new phone, contact your
system administrator.
You can use BLF to monitor a specific line for status changes on the phone. For example,
you can configure a BLF key on the phone for monitoring the status of a friend’s line
(busy or idle). The BLF key LED illuminates solid red when the friend’s line is in use. For
more information on BLF key LED indications, refer to LED Instructions on page 4.
You can press a BLF key to dial out the monitored phone number when the monitored
line is idle. You can receive a visual and an audio alert (if enabled), and also pick up the
call when the monitored line receives an incoming call. For more information, contact
your system administrator.
To configure a BLF key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
or
4.
Press
or
, or the Switch soft key to select BLF from the Type field.
, or the Switch soft key to select the desired line from the Account ID
field.
5.
Enter the phone number or extension you want to monitor in the Value field.
6.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
119
User Guide for the SIP-T46G IP Phone
7.
(Optional.) Enter the pickup code in the Extension field.
8.
Press the Save soft key to accept the change or the Back soft key to cancel.
BLF key is configurable via web user interface at the path DSSKey->Line Key.
You can enable audio alert for BLF pickup on the phone. This allows the monitoring
phone to play a warning tone when the monitored line receives an incoming call. You
can also enable visual alert for BLF pickup on the phone. This allows the LCD screen of
the monitoring phone to display the caller ID when the monitored line receives an
incoming call.
To enable visual and audio alert via web user interface:
Note
120
1.
Click on Features->Call Pickup.
2.
Select Enabled from the pull-down list of Visual Alert for BLF Pickup.
3.
Select Enabled from the pull-down list of Audio Alert for BLF Pickup.
4.
Click Confirm to accept the change.
Visual and audio alerts are configurable via web user interface only.
Advanced Phone Features
When the monitored line receives an incoming call, the followings occur on the phone:

The phone plays a warning tone (if enabled).

The BLF key LED flashes red.

The caller ID appears on the LCD screen (if enabled).
In the following figure, the LCD screen shows an incoming call from 3606 on the
monitored line.
Note
If your phone is locked and the type of the keypad lock is configured as Function Keys or
All Keys, you cannot use the Pickup, Dial, NewCall and Cancel soft keys until unlocked.
When there is an active call on the IP phone, you can transfer the active call to the
monitored phone number directly by pressing the BLF key. The phone transfers the
active call differently depending on the transfer mode via DSS key. For more
information on the transfer mode on DSS key, refer to transfer in DSS Keys section on
page 60.
You can record calls by pressing a record key on the phone. The SIP-T46G IP phone
supports record and URL record.
Two ways of call recording:

Record: The phone sends SIP INFO message containing a specific header “Record:
on/off” to trigger a recording.

URL Record: The phone sends HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
Note
Call record is not available on all servers. Contact your system administrator for more
information.
121
User Guide for the SIP-T46G IP Phone
To configure a record key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
or
, or the Switch soft key to select Key Event from the Type field.
4.
Press
or
, or the Switch soft key to select Record from the Key Event field.
5.
6.
(Optional.) Enter a string that will appear on the LCD screen in the Label field.
Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a URL record key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
4.
(Optional.) Enter a string that will appear on the LCD screen in the Label field.
5.
Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the URL Record field.
6.
Press the Save soft key to accept the change or the Back soft key to cancel.
or
, or the Switch soft key to select URL Record from the Type field.
Record and URL record key are configurable via web user interface at the path
DSSKey->Line Key.
The Record and URL Record keys control the recording, and are available:
122

During an active call

When calls are on hold or mute
Advanced Phone Features

During a blind or attended transfer

During a conference call

When the phone prompts you to answer an incoming call
The Record and URL Record keys are not available when:

There are no connected calls on your phone

You place a new call
To record a call:
1.
Press the Record or URL Record key during a call.
If the recording starts successfully, the recording icon will appear on the LCD screen
and the Record or URL Record key LED will flash green.
2.
Press the Record or URL Record key again to stop recording.
The recording icon disappears from the LCD screen and the Record or URL Record
key LED goes out.
Recording status indications you need to know:
Circumstance
Icons on the LCD screen
A recording is started
appears on the LCD screen
A recording cannot be started
appears for 1 second
A recording cannot be stopped
appears for 1 second, then goes back
The recording box is full
appears for 1 second
The call cannot be recorded
appears for 1 second
You can listen to the recordings stored on your server system. For example, you can dial
an access code to listen to the recordings.
Note
The way in which you listen to the recordings may be different on different servers.
Contact your system administrator for more information.
Hot desking originates from the definition of being the temporary physical occupant of
a work station or surface by a particular employee. A primary motivation for hot
desking is cost reduction. This feature is regularly used in places where not all the
employees are in the office at the same time, or not in the office for very long at all,
which means actual personal offices would be often vacant, consuming valuable space
and resources.
You can use hot desking on the SIP-T46G IP phone to log out of the existing accounts
and then log into a new account. As a result, many users can share the phone resource
123
User Guide for the SIP-T46G IP Phone
in different time. To use this feature, you need to configure a hot desking key in
advance.
Note
Hot desking is not available on all servers. Contact your system administrator for more
information.
To configure a hot desking key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
or
, or the Switch soft key to select Key Event from the Type field.
4.
Press
or
, or the Switch soft key to select Hot Desking from the Key Event
field.
5.
(Optional.) Enter a string that will appear on the LCD screen in the Label field.
6.
Press the Save soft key to accept the change or the Back soft key to cancel.
Hot desking key is configurable via web user interface at the path DSSKey->Line Key.
To use hot desking:
1.
Press the hot desking key when the phone is idle.
The LCD screen prompts the following warning:
2.
Press the OK soft key, registration configurations of all accounts on the phone will be
cleared immediately.
124
Advanced Phone Features
The login wizard will be shown as below:
3.
Enter the login information in each field.
4.
Press the Save soft key to login or the Back soft key to cancel.
Intercom is a useful feature in an office environment to quickly connect with the operator
or the secretary. You can press the intercom key to automatically connect with a remote
extension for outgoing intercom calls, and the remote extension will automatically
answer the incoming intercom calls.
Note
Intercom is not available on all servers. Contact your system administrator for more
information.
To configure an intercom key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
4.
Select the desired line from the Account ID field.
5.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
or
, or the Switch soft key to select Intercom from the Type field.
125
User Guide for the SIP-T46G IP Phone
6.
Enter the remote extension number in the Value field.
7.
Press the Save soft key to accept the change or the Back soft key to cancel.
Intercom key is configurable via web user interface at the path DSSKey->Line Key.
To place an intercom call:
1.
Press the intercom key when the phone is idle.
The phone is automatically connected to the extension specified in the Value field.
2.
Press the intercom key again or the Cancel soft key to end the intercom call.
The SIP-T46G IP phone supports automatically to answer an incoming intercom call by
default. The phone automatically plays a warning tone when it receives an incoming
intercom call. In addition, you can enable the phone to mute the microphone when it
automatically answers an incoming intercom call. You can also enable the phone to
automatically answer an incoming intercom call while there is already an active call on
the phone. The active call is placed on hold.
Intercom features you need to know:
Intercom Feature
Accept Intercom
Intercom Mute
Intercom Tone
Description
Enable or disable the IP phone to automatically
answer an incoming intercom call.
Enable or disable the microphone on the IP phone for
intercom calls.
Enable or disable the IP phone to play a warning
tone when it receives an incoming intercom call.
Enable or disable the IP phone to automatically
Intercom Barge
answer an incoming intercom call while there is
already an active call on the phone.
To configure intercom features via phone user interface:
1.
126
Press Menu->Call Features->Intercom.
Advanced Phone Features
2.
Make the desired changes.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
These specific parameters are configurable via web user interface at the path
Features->Intercom.
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom call.
If Accept Intercom is enabled, the phone automatically answers an incoming intercom
call. If Accept Intercom is disabled, the phone rejects incoming intercom calls and sends
a busy message to the caller. Accept Intercom is enabled by default.
Note
Your administrator can set a period of delay time before the phone automatically
answers intercom calls. Contact your system administrator for more information.
Intercom Mute
You can mute or un-mute the microphone on the phone for intercom calls automatically.
If Intercom Mute is enabled, the microphone is muted for intercom calls. If Intercom
Mute is disabled, the microphone works for intercom calls. Intercom Mute is disabled by
default.
Intercom Tone
You can enable or disable the phone to play a warning tone when receiving an
intercom call. If Intercom Tone is enabled, the phone plays a warning tone before
answering the intercom call. If Intercom Tone is disabled, the phone automatically
answers the intercom call without warning. Intercom Tone is enabled by default.
Intercom Barge
You can enable or disable the phone to automatically answer an incoming intercom call
while there is already an active call on the phone. If Intercom Barge is enabled, the
phone automatically answers the intercom call and places the active call on hold. If
Intercom Barge is disabled, the phone handles an incoming intercom call like a waiting
call. Intercom Barge is disabled by default.
127
User Guide for the SIP-T46G IP Phone
You can use multicast paging to quickly and easily forward time sensitive
announcements out to people within the multicast group. You can configure a multicast
paging key on the phone, which allows you to send a Real Time Transport Protocol (RTP)
stream to the pre-configured multicast address(es) without involving SIP signaling. You
can configure the phone to receive an RTP stream from pre-configured multicast
listening address(es) without involving SIP signaling. You can specify up to 10 multicast
listening addresses.
To configure a multicast paging key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
or
, or the Switch soft key to select Key Event from the Type field.
4.
Press
or
, or the Switch soft key to select Multicast Paging from the Key
Event field.
5.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
6.
Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Value
field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
7.
Press the Save soft key to accept the change or the Back soft key to cancel.
Multicast paging key is configurable via web user interface at the path DSSKey->Line
Key.
You can also configure the phone to use a default codec for sending multicast RTP
stream via web user interface.
To configure a default codec for multicast paging via web user interface:
1.
128
Click on Features->General Information.
Advanced Phone Features
2.
Select the desired codec from the pull-down list of Multicast Codec.
The default codec is G722.
3.
Note
Click Confirm to accept the change.
If G722 codec is used for multicast paging, the LCD screen displays the icon
indicate that is providing high definition voice.
to
Default codec for multicast paging is configurable via web user interface only.
To send RTP stream:
1.
Press the multicast paging key when the phone is idle.
The phone sends RTP to a preconfigured multicast address (IP: Port). Any phone in
the local network then listens to the RTP on the preconfigured multicast address (IP:
Port). For both sending and receiving of the multicast RTP, there is no SIP signaling
involved.
The multicast paging key LED illuminates solid green.
129
User Guide for the SIP-T46G IP Phone
The following figure shows a multicast RTP session on the phone:
2.
Press the Hold soft key to place the current multicast RTP session on hold.
3.
Press the End Call soft key to cancel the multicast RTP session.
Note
Multicast RTP is one way only from sender to the multicast address(es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.
You can configure the phone to receive a Real Time Transport Protocol (RTP) stream from
the pre-configured multicast address(es) without involving SIP signaling. You can
specify up to 10 multicast addresses that the phone listens to on the network.
How the phone handles incoming multicast paging calls depends on Paging Barge and
Paging Priority Active parameters configured via web user interface.
Paging Barge
Paging barge parameter defines the priority of the voice call in progress. If the priority
of an incoming multicast paging call is lower than that of the active call, it will be
ignored automatically. If Disabled is selected from the pull-down list of Paging Barge,
the voice call in progress takes precedence over all incoming multicast paging calls.
Valid values in the Paging Barge field:

1 to 10: Define the priority of the active call, 1 with the highest priority, 10 with the
lowest.

Disabled: The voice call in progress shall take precedence over all incoming paging
calls.
Paging Priority Active
Paging priority active parameter decides how the phone handles incoming multicast
paging calls when there is already a multicast paging call on the phone. If enabled, the
phone will ignore incoming multicast paging calls with lower priorities, otherwise, the
phone will answer incoming multicast paging calls automatically and place the
130
Advanced Phone Features
previous multicast paging call on hold. If disabled, the phone will automatically ignore
all incoming multicast paging calls.
To configure multicast listening addresses via web user interface:
1.
Click on Directory->Multicast IP.
2.
Select the desired value from the pull-down list of Paging Barge.
3.
Select the desired value from the pull-down list of Paging Priority Active.
4.
Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:10008) which
the phone listens for incoming RTP multicast in the Listening Address field.
5.
Enter the label in the Label field.
Label will appear on the LCD screen when receiving the multicast RTP stream.
6.
Note
Click Confirm to accept the change.
The priorities of listening addresses are predefined: 1 with the highest priority, 10 with the
lowest.
Both the multicast paging sender and the receiver play a warning tone when
establishing a multicast paging call.
Multicast listening addresses are configurable via web user interface only.
Music on hold (MoH) is the business practice of playing recorded music to fill the silence
that would be heard by the party placed on hold. To use this feature, you should specify
a SIP URI pointing to a Music on Hold Server account. When a call is placed on hold, the
phone will send a SIP INVITE message to the Music on Hold Server account. The Music
on Hold Server account automatically answers to the SIP INVITE messages and
immediately plays audio from some source located anywhere (LAN, Internet) to the
131
User Guide for the SIP-T46G IP Phone
held party. Contact your system administrator for the SIP URI.
To configure music on hold server via web user interface:
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
4.
Enter the SIP URI (e.g., sip:moh@sip.com) in the Music Server URI field.
5.
Click Confirm to accept the change.
When you place a call on hold, the held party can hear the music.
Note
All involved parties cannot use encrypted RTP (SRTP).
Music on hold server is configurable via web user interface only.
ACD is often used in offices for customer service, such as call center. The ACD system
handles large volumes of incoming calls from callers who have no need to talk to a
specific person but who require assistance from any of multiple persons at the earliest
opportunity. ACD on the SIP-T46G IP phone allows the ACD system to distribute large
volumes of incoming calls to the registered ACD users. To use this feature, you should
configure an ACD key in advance.
Note
132
Make sure ACD is enabled on your IP phone. For more information on enabling ACD,
contact your system administrator.
Advanced Phone Features
To configure an ACD key via phone user interface:
1.
Press Menu->Call Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press
4.
5.
or
, or the Switch soft key to select ACD from the Type field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
Press the Save soft key to accept the change or the Back soft key to cancel.
ACD key is configurable via web user interface at the path DSSKey->Line Key.
To log into the ACD system:
1.
Press the ACD key when the phone is idle.
The LCD screen prompts you the following information:
User ID: the identity used to log into the queue.
Password: the password used to log into the queue.
2.
Note
Press the Login soft key to log into.
Contact your system administrator for the User ID and Password to access the ACD
system.
After configuring an ACD key, you can press the ACD key to log into the ACD system.
After logging in, you are ready to receive calls from the ACD system. You can press the
ACD key to show your current ACD user status. You can press the Available/Unavailable
soft key to change your ACD user status. ACD user status synchronizes on both IP phone
133
User Guide for the SIP-T46G IP Phone
and ACD system.
When you set the ACD user status to be available, the ACD key LED illuminates solid
green, and then the server begins distributing calls to your phone.
When you set the ACD user status to be unavailable, the ACD key LED flashes green,
and then the server temporarily stops distributing calls to your phone. To log out of the
ACD system, press the Logout soft key.
Note
It is recommended you configure no more than one ACD key per phone. At any time, at
most one ACD key can be in progress on your phone.
You can send and receive text messages using the SIP-T46G IP phone. New text
messages can be indicated both acoustically and visually. When receiving a new text
message, the phone will play a warning tone. The power indicator LED will slow flash
red, and the LCD screen will prompt receiving new text messages with the number of
waiting messages (e.g., 1 New Text Message) and an icon.
Note
134
SMS is not available on all servers. Contact your system administrator for more
information.
Advanced Phone Features
To read a text message:
Note
1.
Press Menu->Messages->Text Message->Inbox.
2.
Select the desired message and press the View soft key.
If the phone prompts receiving new text messages, you can also press the View soft key
to read the new messages directly.
To send a text message:
1.
Press Menu->Messages->Text Message->New Message.
2.
Compose the new text message. You can press the abc soft key to change the input
mode.
3.
Press the Send soft key.
4.
(Optional.) Press
or
, or the Switch soft key to select the desired account
from the From field.
5.
Enter the number you want to send the message to in the To field.
6.
Press the Send soft key to send the message or the Back soft key to cancel.
Sending a text message is configurable via web user interface at the path
Features->SMS.
To reply a text message:
1.
Press Menu->Messages->Text Message->Inbox.
2.
Select the desired message and press the Reply soft key.
135
User Guide for the SIP-T46G IP Phone
3.
Compose the new text message. You can press the abc soft key to change the input
mode.
4.
Press the Send soft key after completing the content.
To delete a text message:
1.
Press Menu->Messages->Text Message->Inbox (Sent Box, Outbox or Draftbox).
2.
Select the desired message and then press the Option soft key.
3.
Select Delete to delete the desired message.
The LCD screen prompts "Delete the selected message".
4.
Press the OK soft key to delete this message or the Cancel soft key to cancel.
You can also delete all text messages by pressing the Option soft key and then select
Delete All. For more information, refer to the above steps.
Note
136
You can also delete a specific message after retrieving by pressing the Delete soft key.
Advanced Phone Features
You can leave voice mails for someone else on the SIP-T46G IP phone. You can also listen
to the voice mails stored in a centralized location. When receiving a new voice mail, the
phone will play a warning tone, and the power indicator LED will slow flash red. The
LCD screen will prompt receiving a new voice mail with the number of waiting voice
mails (e.g., New Voice Mail(1)) and an icon.
Note
Voice Mail is not available on all servers. Contact your system administrator for more
information.
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
1.
Press Menu->Messages->Voice Mail->Set Voice Mail.
2.
Press the navigation keys to highlight the account which you want to set.
3.
Press the 123 soft key to select the proper input mode and then enter the voice mail
access code (e.g., *97).
137
User Guide for the SIP-T46G IP Phone
4.
Note
Press the Save soft key to accept the change or the Back soft key to cancel.
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.
To listen to voice mails:
1.
When the phone user interface prompts receiving new voice mails and the power
indicator LED slow flashes red, press
or the Connect soft key to dial out the
voice mail access code.
2.
Note
Follow the voice prompt to listen to voice mails.
Before listening to voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the power indicator LED will go out.
To view the voice mail via phone user interface:
1.
Press Menu->Messages->Voice Mail->View Voice Mail.
The LCD screen displays the amount of new and old voice mails
2.
Select an account and then press the Connect soft key to listen to voice mails.
The SIP-T46G IP phone supports MWI when receiving a new voice message. If someone
leaves you a voice mail, you will receive a message waiting indicator. MWI will be
indicated in three ways: a warning tone, an indicator message (including a voice mail
icon) on the LCD screen, and the power indicator LED slow flashes red. This will be
cleared when you retrieve all voice mails or delete them.
138
Advanced Phone Features
The MWI service is unsolicited for some servers, so the SIP-T46G IP phone only handles
the MWI messages sent from the server. But for other servers, the MWI service is
solicited, so the SIP-T46G IP phone must enable subscription for MWI.
Note
MWI service is not available on all servers. Contact your system administrator for more
information.
The MWI subscription parameters you need to know:
Options
Subscribe for MWI
Description
Enable or disable a subscription for MWI service.
Period of MWI subscription. The IP phone sends a
MWI Subscription Period
refresh SUBSCRIBE request before initial SUBSCRIBE
expiration.
Enable or disable a subscription to the voice mail
Subscribe MWI to VM
number for MWI service.
To use this feature, you should also configure the
voice mail number.
Note
Whether the phone sends SUBSCRIBE messages for MWI service to the account or the
voice number MWI service depends on the server. Contact your system administrator for
more information.
To configure subscribe for MWI via web user interface
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
4.
Select Enabled from the pull-down list of Subscribe for MWI.
139
User Guide for the SIP-T46G IP Phone
5.
Enter the period time in the MWI Subscription Period (Seconds) field.
6.
Click Confirm to accept the change.
The IP phone will subscribe to the account number for MWI service by default.
To enable Subscribe MWI to Voice Mail via web user interface:
140
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
4.
Select Enabled from the pull-down list of Subscribe MWI To Voice Mail.
5.
Enter the desired voice mail number in the Voice Mail field.
6.
Click Confirm to accept the change.
Advanced Phone Features
The IP phone will subscribe to the voice mail number for MWI service using
Subscribe MWI to Voice Mail.
Note
MWI subscription is configurable via web user interface only.
141
User Guide for the SIP-T46G IP Phone
142
Troubleshooting
This chapter provides general troubleshooting information to help you solve the
problems you might encounter when using your SIP-T46G IP phone.
If you require additional information or assistance with your new phone, contact your
system administrator.
Why is the LCD screen blank?

Ensure that the phone is properly plugged into a functional AC outlet.

Ensure that the phone is plugged into a socket controlled by a switch that is on.

If the phone is plugged into a power strip, try to plug it directly into a wall outlet
instead.

If the phone is powered from PoE, ensure you use a PoE-compliant switch or hub.
Why does the phone display "Network Unavailable."?

Ensure that the Ethernet cable is plugged into the Internet port on the phone and
the Ethernet cable is not loose.

Ensure that the switch or hub in your network is operational.
Why doesn’t the phone display time and date correctly?
Check if you have configured the phone to obtain the time and date from the SNTP
server automatically. If the phone fails to connect the SNTP server, you need to configure
the time and date manually.
How do I find the basic information of the IP phone?
Press the OK key when the IP phone is idle to check the basic information of the IP phone,
such as IP address and firmware version. For more basic information, refer to Phone
Status on page 14.
How to obtain the MAC address of a phone when the phone is not powered on?
Three ways to obtain the MAC address of a phone:

You can ask your supplier for shipping information sheet which includes MAC
addresses according to the corresponding PO (Purchase Order).

You can find the MAC address in the label of carton box.

You can also find the MAC address from the phone’s bar code on the back of the
phone.
143
User Guide for the SIP-T46G IP Phone
Why can’t I get a dial tone?

Check for any loose connections and that the phone has been installed properly.
For the installation instructions, refer to Phone Installation on page 11.

Switch between the Handset, Headset (if present) or Hands-Free Speakerphone to
check whether the dial tone is present for one of the audio modes.
If the dial tone exists on another audio mode, connect a different handset or
headset to isolate the problem.
Why doesn’t the phone ring?
Check the ringer volume on the phone. To adjust the ringer volume setting, press the
Volume key when the phone is on-hook and idle. For more information, refer to Volume
on page 30.
Why can’t I receive calls?

Check the SIP registration with your system administrator.

Check that DND (Do Not Disturb) mode is deactivated on your phone. Refer to Do
Not Disturb (DND) on page 94.

Check that call forward is disabled on the phone. Refer to Call Forward on page 98.

Check whether the caller number is stored in the blacklist directory. Refer to Blacklist
on page 47.
Why is my handset not working?
Check that the handset cord is fully connected to both the handset jack on the phone
and handset. Refer to Phone Installation on page 11.
Why is my headset not working?

Check that the headset cord is fully connected to the headset jack on the phone.
Refer to Phone Installation on page 11.

Check that the headset mode is activated. Refer to Headset Use on page 53.

Check that the headset volume is adjusted to an appropriate level. Refer to Volume
on page 30.
What is the difference between user name, register name and display name?
Both user name and register name are defined by the server. A user name is used to
identify the account while a register name matched with a password is used for
authentication if the server requires. Display name is the caller ID that will be displayed
on the callee’s LCD screen. Server configuration may override the local configuration.
144
Troubleshooting
Why does the phone play a tone when there is a call on hold? How to disable it?
When there is a call on hold, the phone will play a hold tone every 30 seconds. Call hold
tone is enabled by default. Call hold tone and the interval of playing a hold tone are
configurable via web user interface only.
To configure call hold tone and call hold tone delay via web user interface:
1.
Click on Features->General Information.
2.
Select the desired value from the pull-down list of Play Hold Tone.
3.
Enter the desired time in the Play Hold Tone Delay field.
4.
Click Confirm to accept the change.
Why does the wallpaper has bad display?
Do one of the following:

Check that the custom image is clear.

Check that the file format of the custom image for the wallpaper is *.jpg, *.png or
*.bmp.

Check that the custom image is not too large or small. The phone will adjust the
image with the short side to display.

Check that the picture resolution of the wallpaper. The wallpaper resolution of
SIP-T46G IP phone is 480*272 pixels.
145
User Guide for the SIP-T46G IP Phone
Why I can’t send an SMS to any other phone?
SMS depends on support from a SIP server. Contact your system administrator for more
information.
How to change the user password?
To change the user password via web user interface:
1.
Click on Security->Password.
2.
Select user from the pull-down list of User Type.
3.
Enter the new user password in the New Password field and Confirm Password field.
4.
Click Confirm to accept the change.
You can also contact your system administrator for help.
Note
If logging into the web user interface of the phone with the user credential, you need to
enter the current user password in the Old Password field.
User password is configurable via web user interface only.
How to make a call using SRTP?
You can enable SRTP to encrypt the audio stream(s) of phone calls. The parties
participating in the call should enable SRTP on a per-line basis.
To enable SRTP on a per-line basis via web user interface:
146
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
Troubleshooting
4.
Select the desired value (Optional or Compulsory) from the pull-down list of RTP
Encryption (SRTP).
5.
Note
Click Confirm to accept the change.
SRTP is not available on all servers. Contact your system administrator for more
information.
SRTP is configurable via web user interface only.
How to reboot the phone?
To reboot the phone via web user interface:
1.
Click on Settings->Upgrade.
147
User Guide for the SIP-T46G IP Phone
2.
Click Reboot to reboot the IP phone.
Any reboot of the phone may take a few minutes.
How to export PCAP trace?
We may need you to provide a PCAP trace to help analyze your problem.
To export a PCAP trace via web user interface:
1.
Click on Settings->Configuration.
2.
Click Start to begin capturing signal traffic.
3.
Recreate the error to be documented in the trace.
4.
Click Stop to stop the capture.
5.
Click Export to open file download window, and then save the file to your local
system.
How to export system log?
We may need you to provide a system log to help analyze your problem.
148
Troubleshooting
To export the system log to local PC via web user interface:
1.
Click on Settings->Configuration.
2.
Select 6 from the pull-down list of System Log Level.
3.
Click Confirm to accept the change.
The web user interface prompts “Do you want to restart your machine?”. The
configuration will take effect after reboot.
4.
Click OK to reboot the phone.
After the IP phone finishes reboot, the system log level is set as 6, the debug level.
5.
Mark the Local radio box in the Export System Log field.
6.
Click Export to open file download window, and then save the file to your local
system.
You can also export the system log to a syslog server, contact your system administrator
for more information.
Note
It is recommended to reset the syslog level to 3 after exporting the system syslog.
How to export/import the phone configurations?
We may need you to provide the phone configurations to help analyze problem. In
some instance, you may need to import configurations to your phone.
To export the phone configurations via web user interface:
1.
Click on Settings->Configuration.
149
User Guide for the SIP-T46G IP Phone
2.
Click Export to open file download window, and then save the file to your local
system.
To import the phone configurations via web user interface:
Note
1.
Click on Settings->Configuration.
2.
Click Browse to locate a configuration file from your local system.
3.
Click Import to import the configuration file.
The file format of configuration file must be *.bin.
How to upgrade firmware?
To upgrade firmware via web user interface:
1.
Click on Settings->Upgrade.
2.
Click Browse to locate the firmware from your local system.
3.
Click Upgrade to upgrade the firmware.
The browser pops up the dialog box “Firmware of the SIP Phone will be updated. It
will take 5 minutes to complete. Please don't power off!”.
4.
150
Click OK to confirm upgrading.
Troubleshooting
How to reset the phone?
Reset the phone to factory configurations after you have tried almost all troubleshooting
suggestions but do not solve the problem. You need to note that all customized settings
will be overwritten after reset.
To reset the phone via phone user interface:
1.
Press Menu->Advanced (password: admin) ->Reset & Reboot->Reset to Factory.
2.
Press
or
, or the Switch soft key to select the desired type from Reset
Option field.
3.
Press the Save soft key.
The LCD screen prompts the following warning:
4.
Press the OK soft key.
The LCD screen prompts “Welcom Initializing…Please wait”.
The phone will be reset to factory sucessfully after startup.
Note
Reset of the phone may take a few minutes. Do not power off until the phone starts up
successfully.
151
User Guide for the SIP-T46G IP Phone
152
Regulatory Notices
Contact your Yealink Authorized Reseller for information about service agreements
applicable to your product.
TO THE FULL EXTENT ALLOWED BY LAW, YEALINK EXCLUDES FOR ITSELFAND ITS
SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT
(INCLUDINGNEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL,
OR PUNITIVE DAMAGES OFANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS
OF BUSINESS, LOSS OF INFORMATION ORDATA, OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE SALE,INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS,EVEN IF YEALINK OR ITS
AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCHAMAGES,
AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE
PURCHASERICE PAID, AT YEALINK’S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BEAFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF
ITS ESSENTIAL PURPOSE.
Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce risk of fire,
electrical shock, and other personal injury.
General Requirements

Before you install and use the device, read the safety instructions carefully
and observe the situation during operation.

During the process of storage, transportation, and operation, please always
keep the device dry and clean.

During the process of storage, transportation, and operation, please avoid
collision and crash of the device.

Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.

Without prior written consent, no organization or individual is permitted to
make any change to the structure or the safety design of the device. Yealink
is under no circumstance liable to consequences or legal issues caused by
such changes.

Please refer to the relevant laws and statutes while using the device. Legal
rights of others should be respected as well.
Environmental Requirements

Place the device at a well-ventilated place. Do not expose the device under
direct sunlight.
153
User Guide for the SIP-T46G IP Phone

Keep the device dry and free of dusts.

Place the device on a stable and level platform.

Please place no heavy objects on the device in case of damageand
deformation caused by the heavy load.

Keep at least 10 cm between the device and the closest object for heat
dissipation.

Do not place the device on or near any inflammable or fire-vulnerable object,
such as rubber-made materials.

Keep the device away from any heat source or bare fire, such as a candle or
an electric heater.

Keep the device away from any household appliance with strong magnetic
field or electromagnetic field, such as a microwave oven or a refrigerator.
Operating Requirements

Do not let a child operate the device without guidance.

Do not let a child play with the device or any accessory in case of accidental
swallowing.

Please use the accessories provided or authorized by the manufacturer only.

The power supply of the device shall meet the requirements of the input
voltage of the device. Pleaseuse the provided surge protection power socket
only.

Before plugging or unplugging any cable, make sure that your hands are
completely dry.

Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet basement
or near a swimming pool.

Do not tread on, pull, or over-bend any cable in case of malfunction of the
device.

During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital Subscriber
Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.

If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.

When there is smoke emitted from the device, or some abnormal noise or
smell, disconnect the device from the power supply, and unplug the power
plug immediately. Contact the specified maintenance center for repair.

Do not insert any object into equipment slots that is not part of the product or
auxiliary product.

Before connecting a cable, connect the grounding cable of the device first.
Do not disconnect the grounding cable until you disconnect all other cables.
Cleaning Requirements
154

Before cleaning the device, stop using it and disconnect it from the power
supply.

Use a piece of soft, dry and anti-static cloth to clean the device.

Keep the power plug clean and dry. Using a dirty or wet power plug may
lead to electric shock or other perils.
Appendix A-Time Zones
Time Zone
−11:00
−10:00
−10:00
−09:00
−08:00
−08:00
−08:00
−07:00
−07:00
−07:00
−07:00
−06:00
−06:00
−06:00
−06:00
−05:00
−05:00
−05:00
−05:00
−04:30
−04:00
−04:00
−04:00
−04:00
−04:00
−04:00
−03:30
−03:00
−03:00
−03:00
−03:00
−02:00
−01:00
0
0
0
0
0
0
0
0
+01:00
+01:00
+01:00
+01:00
+01:00
+01:00
+01:00
+01:00
+01:00
+01:00
Time Zone Name
Samoa
United States-Hawaii-Aleutian
United States-Alaska-Aleutian
United States-Alaska Time
Canada(Vancouver, Whitehorse)
Mexico(Tijuana, Mexicali)
United States-Pacific Time
Canada(Edmonton, Calgary)
Mexico(Mazatlan, Chihuahua)
United States-Mountain Time
United States-MST no DST
Canada-Manitoba(Winnipeg)
Chile(Easter Islands)
Mexico(Mexico City, Acapulco)
United States-Central Time
Bahamas(Nassau)
Canada(Montreal, Ottawa, Quebec)
Cuba(Havana)
United States-Eastern Time
Venezuela(Caracas)
Canada(Halifax, Saint John)
Chile(Santiago)
Paraguay(Asuncion)
United Kingdom-Bermuda(Bermuda)
United Kingdom(Falkland Islands)
Trinidad&Tobago
Canada-New Foundland(St.Johns)
Denmark-Greenland(Nuuk)
Argentina(Buenos Aires)
Brazil(no DST)
Brazil(DST)
Brazil(no DST)
Portugal(Azores)
GMT
Greenland
Denmark-Faroe Islands(Torshavn)
Ireland(Dublin)
Portugal(Lisboa, Porto, Funchal)
Spain-Canary Islands(Las Palmas)
United Kingdom(London)
Morocco
Albania(Tirane)
Austria(Vienna)
Belgium(Brussels)
Caicos
Chad
Spain(Madrid)
Croatia(Zagreb)
Czech Republic(Prague)
Denmark(Kopenhagen)
France(Paris)
155
User Guide for the SIP-T46G IP Phone
Time Zone
+01:00
+01:00
+01:00
+01:00
+01:00
+01:00
+01:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+02:00
+03:00
+03:00
+03:00
+03:30
+04:00
+04:00
+04:00
+04:00
+04:00
+04:30
+05:00
+05:00
+05:00
+05:00
+05:30
+06:00
+06:00
+07:00
+07:00
+08:00
+08:00
+08:00
+09:00
+09:00
+09:30
+09:30
+10:00
+10:00
+10:00
+10:00
+10:30
+11:00
+12:00
+12:45
+13:00
156
Time Zone Name
Germany(Berlin)
Hungary(Budapest)
Italy(Rome)
Luxembourg(Luxembourg)
Macedonia(Skopje)
Netherlands(Amsterdam)
Namibia(Windhoek)
Estonia(Tallinn)
Finland(Helsinki)
Gaza Strip(Gaza)
Greece(Athens)
Israel(Tel Aviv)
Jordan(Amman)
Latvia(Riga)
Lebanon(Beirut)
Moldova(Kishinev)
Russia(Kaliningrad)
Romania(Bucharest)
Syria(Damascus)
Turkey(Ankara)
Ukraine(Kyiv, Odessa)
East Africa Time
Iraq(Baghdad)
Russia(Moscow)
Iran(Teheran)
Armenia(Yerevan)
Azerbaijan(Baku)
Georgia(Tbilisi)
Kazakhstan(Aktau)
Russia(Samara)
Afghanistan
Kazakhstan(Aqtobe)
Kyrgyzstan(Bishkek)
Pakistan(Islamabad)
Russia(Chelyabinsk)
India(Calcutta)
Kazakhstan(Astana, Almaty)
Russia(Novosibirsk, Omsk)
Russia(Krasnoyarsk)
Thailand(Bangkok)
China(Beijing)
Singapore(Singapore)
Australia(Perth)
Korea(Seoul)
Japan(Tokyo)
Australia(Adelaide)
Australia(Darwin)
Australia(Sydney, Melbourne, Canberra)
Australia(Brisbane)
Australia(Hobart)
Russia(Vladivostok)
Australia(Lord Howe Islands)
New Caledonia(Noumea)
New Zealand(Wellington, Auckland)
New Zealand(Chatham Islands)
Tonga(Nukualofa)
Index
E
A
About This Guide
ix
Account Management
71
Account Registration
71
Adding Contacts 37
Administrator password
25
Anonymous Call
116
Anonymous Call Rejection
117
Answering Calls
85
Area Code 77
Attaching Stand 11
Audio Settings
30
Auto Answer
85
Auto Redial
89
Automatic Call Distribution
132
B
Backlight 20
Basic Network Settings
Blacklist
47
Block Out
78
Bluetooth
55
Busy Lamp Field (BLF)
15
119
C
Call Completion
91
Call Forward
98
Call Mute
93
Call History Management 51
Call Hold/Resume
93
Call Park
110
Call Pickup
111
Call Recording
121
Call Return
92
Call Transfer 105
Call Waiting
107
CE Mark Warning
vi
Conference
107
Contact Management 33
Contrast 21
Copyright
v
Customizing Your Phone
19
D
Declaration of Conformity
vi
Deleting Contacts
41
Dial-now
75
Dial Plan
73
Do Not Disturb (DND)
94
Documentation
8
DSS Keys
60
Editing Contacts
40
Emergency Number
79
Ending Calls 87
G
General Settings
19
Getting Started 9
H
Hardware Component Instructions
1
Headset Use 53
Headset Mode Activation/Deactivation
53
Hotline
81
Hot Desking
123
I
Icon Instructions
3
Idle screen 17
Importing/Exporting Contact lists
In This Guide
ix
Incoming Intercom Calls 126
Intercom
125
46
K
Key as Send
Keypad Lock
26
27
L
Language
22
LED Instructions
4
Limitation of Liability
153
Line Keys
60
Live Dialpad
80
Local Conference
107
Local Directory
35
M
Message Waiting Indicator
138
Messages
134
Multicast Paging
128
Multiple Line Keys per Account
72
Music on Hold
131
N
Network Conference
Network Connection
109
11
P
Packaging Contents
9
157
User Guide for the SIP-T46G IP Phone
Phone Initialization
13
Phone Installation 11
Phone Status
14
Phone User Interface
6
Placing Calls
83
Placing Calls to Contacts 43
Programmable Keys
70
O
Outgoing Intercom Calls
Overview
1
125
R
Recent Call In Dialing
87
Redialing Numbers
87
Registration
17
Regulatory Notices
153
Remote Phone Book
49
Replace Rule
74
Ring Tones
31
S
Safety Instructions
153
Search Source List in Dialing
44
Searching for Contacts 43
Semi-attended Transfer 105
Service Agreements 153
Short Message Service (SMS)
134
System Customizations 53
T
Time & Date
23
Time Zones
155
Troubleshooting
143
V
Voice Mail
137
Volume
30
W
Warranty vi
Wallpaper 19
Web User Interface
WEEE Warning
vii
158
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising