JLR Pass-Thru

JLR Pass-Thru
JLR Pass-Thru
Autologic 2016
Disclaimer – This information is provided as a guide only and subject to change by the vehicle
manufacturer. Autologic cannot be held responsible for any errors regarding manufacturer information
that leads to diagnosis or programming malfunctions. This document is regularly updated so please check
for latest version.
Symptom Driven Diagnostics (SDD)

The SDD will allow the user to program Land Rover and Jaguar vehicles.

With a valid Topix subscription it will also allow access to dealer wiring diagrams, service information and
bulletins.
The minimum hardware specification required for SDD is:









32 bit operating system only
I3 processor 4GB RAM
Display resolution of 1024x768 or greater, 16 bit colour
Hard Drive: 60Gb minimum
Internet Explorer 8
USB host connection or 10/100Mbit Ethernet card (for J2534 interface connection)
SAE J2534 interface device with J2534-2 optional extensions for medium speed CAN and J1962 pin switching
Modem connection for on-line software updates and authentication
The SDD application has been tested with the following operating systems:

Microsoft® Windows 7 Professional Service pack 1 with Internet Explorer 8
Note: It is recommended that only SDD software is installed to the laptop you are using, as other programs can
affect how SDD works.
2016 Autologic Diagnostics Limited
2
JLR Pass-Thru
Symptom Driven Diagnostics (SDD)
Models Covered
Land Rover
Jaguar
Defender (2007 onwards)
XJ-X351
Discovery LR3/LR4
XK-X150
Range Rover Sport L320
XF
Range Rover L322 (2005 onwards, limited
cover on 2005 and 2006 model years)
F-Type
Range Rover Sport L494
Range Rover L405
Freelander 2/LR2
Discovery Sport
Range Rover Evoque
2016 Autologic Diagnostics Limited
3
JLR Pass-Thru
JLR Registration on Topix
 A Topix account registration is required before you can access any information.
 There is only one registration required and this will allow you to use both Jaguar
and Land Rover sites.
 Further accreditation is required to program any new security module. This can
be found under the ‘links’ icon on the Topix home page. For example, depending
on model year, Engine, Body, KVM and key programming could be considered
as security modules.
 To register login to:
 https://topix.jaguar.jlrext.com/topix/vehicle/lookupForm
 https://topix.landrover.jlrext.com/topix/vehicle/lookupForm
1. Firstly, you will be prompted to select your language and country
2. To start the registration process, select ‘Register’
2016 Autologic Diagnostics Limited
4
JLR Pass-Thru
JLR Registration on TOPIx
3.
4.
Accept the Terms and Conditions by selecting ‘OK’
Complete the Topix registration form. (You are required to fill all
Mandatory fields as indicated with an asterisk *)
5.
Once registration is complete you can install SDD to your
computer
2016 Autologic Diagnostics Limited
5
JLR Pass-Thru
SDD Installation
1.
To install the SDD on a computer select the link:
http://diagnosticdelivery.jlrext.com/idscentral
2.
SDD 145.00 Full.exe will need to be installed first
3.
Then install each update in numerical order
4.
Next download the VDF and SPA files
5.
You will need to restart your machine after every update
6.
Updates are added frequently by JLR
2016 Autologic Diagnostics Limited
6
JLR Pass-Thru
SDD Installation
6.
The install wizard will now prepare the software:
2016 Autologic Diagnostics Limited
1
1
4
3
7
JLR Pass-Thru
SDD Installation
5
6
8
7
2016 Autologic Diagnostics Limited
8
JLR Pass-Thru
SDD Installation
9
10
11
2016 Autologic Diagnostics Limited
9
JLR Pass-Thru
SDD Update
 Updates consist of SDD Software Updates and Calibration File releases.
 Current installed software levels can be checked via ‘Settings’ > ‘System
information.’
 Updates can be started via ‘Settings’ > ‘System Utilities’
 For further information on keeping your software updated please refer to the
information available on Topix.
2016 Autologic Diagnostics Limited
10
JLR Pass-Thru
Subscription Purchase
 Once the registration process is complete, and SDD is downloaded you
now need to purchase a programming subscription.
1.
2.
To purchase a subscription go to the Topix Home page.
Select ‘Options’
3.
Select ‘Add’
2016 Autologic Diagnostics Limited
11
JLR Pass-Thru
Subscription Purchase
4.
5.
6.
Select ‘Subscription type’ (Independent Module Programming).
Select period required.
Select ‘Next.’
 Current prices as of 20/08/2015:
 1 hour: £143.00 + VAT
 1 Day: £167.00 + VAT
 1 Week: £302.00 + VAT
 1 Month: £496.50 + VAT
 1 Year: £750.00 + VAT
2016 Autologic Diagnostics Limited
12
JLR Pass-Thru
Subscription Purchase
7.
Check order summary.
8.
Select ‘Complete order’
9.
On the next page, you will need to enter your credit card details to
complete the process.
10. Once the order has been completed, you can now sign into SDD
using the user name and password you created for Topix
11. Before using SDD you will need to go into ‘Settings’ > ‘Dealer
information’ and then enter your company information. You can
also set your user preferences here.
12. The last thing to do before communicating with the vehicle is to
download the Dongle driver from the Autologic website to your
PC.
2016 Autologic Diagnostics Limited
13
JLR Pass-Thru
Thank you for using this Autologic Pass-Thru guide.
We hope that you found it useful.
If you have any further issues, please contact our
Pass-Thru Support Team.
2016 Autologic Diagnostics Limited
14
JLR Pass-Thru
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising