Simply - Gianni Ferrari
FLAIL
TECHNICAL
SPECIFICATION
15,5-16 HP
Rear discharge/mulching deck
(Turbo 5)
GTS
16-22 HP
With the cutting width of 165 cm it is a very innovative
deck with exceptional performances.
An exclusive adjustment system of the cutting height
allows a fast adjustment without effort.
These decks are very safe and strong even in very
difficult working conditions and have a very good cutting
quality on nice lawn and for rough on golf courses.
The mulching kit allows a better mulching of the grass
avoiding its collection. It is recommended during the
central cutting period or when a perfect surface cleaning
is not required.
GT
22-30 HP
Safety sensors
Transmission
Type
Snow Thrower
Snow Thrower two-stage, 130 cm, hydraulic oriented
and plexiglass protection for the operator.
SRZ
15-27 HP
TURBOGRASS
22 HP
Flail mower
With a working width 155 cm, this heavy duty Flail
Mower is ideal for use on fine grass, weeds and dry
twigs.
SR
22-30 HP
Kubota V 2203
cc 2200 - 50 HP
4 - 2800
Kubota V 2403 MT Turbo
cc 2434 - 60 HP
4 - 2600
Diesel 4 stroke water cooled
Self-cleaning
70 Liter
1800 Kg
Simply... The First in its class
Exceptional traction on slopes
1950 Kg
TURBO 5
20 cm
180 cm
195 cm
300 (330) cm
Trelleborg: 26x12.00-12 / 20x10.00-8
12 V 100 Amp.
Complete lighting set.
Electronic control panel with: engine RPM, hour, coolant temp., fuel level, diesel pre-heating, hydro
oil filter, max oil temp., low/ high speed, front and side decks PTO, deck lift controls, diagnostic.
According to CE regulation.
Pump and 2 hydro motor with variable cc Sauer Danfoss on mechanical transaxle with differential.
Differential lock on front axle - permanent 4 wheel drive.
Automatic anti-slip system (patented) - Automatic slow down on turns.
30 lt
Oil tank
2 pedals
Speed control
From 0 to 12 (24) km/h
Forward speed low (high)
From 0 to 6 (12) km/h
Rear speed low (high)
Steering and seat
Power steering.
Steering system
Adjustable deluxe high-backed with arm rest (optional heating).
Seat
Roll over protection structure with roof for sun and rain protection.
Operator protection
Optional glass wind screen with wiper and water tank.
Heating.
With electric-hydraulic actuator - disc brake
PTO
Brakes
Hydrostatic braking through transmission
Operating brake
Disc on front axle x 2
Parking brake
Rear discharge decks
Total working width
210 cm
from cm 165 to cm 310
from cm 155 to cm 300
Front deck
20° floating side wings, 4 discs
165 cm with 4 discs with twin
TEG 1600 flail mower, 150cm
with twin floating blade floating blade - mechanical
working width with mechanical
mechanical transmission - device transmission - device for vertical
transmission,it is possible to
for vertical positioning
positioning - mulching kit
apply the aerator blade.
- mulching kit
Side wings
PG
22-30 HP
Height of cut
Spreader
The First in Efficiency, the First in Manouvrability
The First in Cutting quality, the First in Traction on slopes
The First in Safety, the First in Comfort
FLAIL
56010 Printed in Italy 09.10
GTM
Engine
Model
Displacement - HP
Cylinders - RPM
Type
Pre-filter
Fuel tank
Weight and dimension
Total weight with ROPS
Ground clearance
Min width with wings in
transport position
Total length (with decks)
Wheel
Front - Rear
Electric system
Battery
Instruments
—
100 cm 2 discs with twin floating
blade - 2 ways impact absorbing
system - Variable Working Width
(VWW patented system) with
hydraulic cylinder - device for
vertical positioning - transmission:
hydro motor on gear boxes in oil
bath
From 2 cm to 11 cm with single lever system
100 cm flail mowertransmission with hydraulic
motor - anti shock device
From 2 cm to 10 cm
TURBO 1-1W-2-4
Snow blade
The snow blade can be hydraulically lifted and put in
any position, allowing your Turbo 5 / 6 to be useful and
productive throughout the winter.
OFFICINE BIEFFEBI s.p.a.
Via dell’Artigianato, 7
46023 Gonzaga (MN) Italy
Tel. +39 0376 52641
Fax +39 0376 588270
bieffebi@gianniferrari.com
GIANNI FERRARI s.r.l.
Via Vespucci, 53
42046 Reggiolo (RE) Italy
Tel. +39 0522 973697
Fax +39 0522 973707
info@gianniferrari.com
TURBOLOADER
22-36 HP
www.gianniferrari.com
TURBO 6 FLAIL
The patented anti-slip and anti-scuff permanent 4 wheel drive
system continuously adapts the front and rear axle speed to
allow the 4 wheel to drive the machine on the most difficult
slopes without any scuffing and damage to the lawn. The system
consists of an oversized hydraulic variable flow piston pump,
driving 2 hydraulic variable flow motors, 1 each axle. The patented
ANTI SKID/SCUFF device detects the turning radius allowing a
constant and automatic speed adjustment of the 2 driving axles.
Absolute comfort
The machine is designed to allow the operator to work comfortably
all the day long:
• Deck cutting height is adjusted through a unique single lever
system, extremely quick and easy. For the Turbo 6 the total time
to adjust the 3 decks cutting height is lower than 30 seconds.
It is reduced to 10 seconds for the Turbo 5 deck.
• The deluxe high back seat and the steering wheel support have
several adjustments to fit any operator size. If requested is
available an heated seat model.
• The right arm rest is made of a comfortable cushion including
the control panel with all machine controls and data log.
The traditional levers have been replaced by computerised touch
screen and buttons controlling any machine function,
including PTO engagement, hydraulic, lifts, engine throttle.
• The machine is provided with a rain and sun protection roof
that can be completed with a front glass screen with wiper and
screen washer. (Option)
Safety as a priority
TURBO 6
The machine has been designed, tested and manufactured to
meet all the toughest safety standards.
In addition the machine is equipped with:
• an exclusive automatic speed control system, slowing down
the machine when turning. This, together with a low center of
gravity, make the unit very stable during quick turns.
• A certified very protective ROPS with special locking seat belts
protects the operator in case of roll-over.
Heavy duty construction and easy
maintenance
In their constant bid to improve performance levels, Gianni Ferrari reserves the right to alter any technical aspects or performance, without prior warning.
Likewise the models in this catalogue are subject to change. No liability is accepted for any possible misprints.
28-36 HP
FLAIL
The machine has been designed and built to last several thousands
of hours of tough work with limited maintenance.
Special attention has been given to make maintenance quick and
easy.
Components such as rops, engine hood, fuel tank, radiator can tilt
up for an easy access.
A generous Industrial radiator takes fresh and filtered air from the
top of the machine, not from the rear, and allows continuous operation
in the toughest mowing conditions.
FLAIL
TECHNICAL
SPECIFICATION
15,5-16 HP
Rear discharge/mulching deck
(Turbo 5)
GTS
16-22 HP
With the cutting width of 165 cm it is a very innovative
deck with exceptional performances.
An exclusive adjustment system of the cutting height
allows a fast adjustment without effort.
These decks are very safe and strong even in very
difficult working conditions and have a very good cutting
quality on nice lawn and for rough on golf courses.
The mulching kit allows a better mulching of the grass
avoiding its collection. It is recommended during the
central cutting period or when a perfect surface cleaning
is not required.
GT
22-30 HP
Safety sensors
Transmission
Type
Snow Thrower
Snow Thrower two-stage, 130 cm, hydraulic oriented
and plexiglass protection for the operator.
SRZ
15-27 HP
TURBOGRASS
22 HP
Flail mower
With a working width 155 cm, this heavy duty Flail
Mower is ideal for use on fine grass, weeds and dry
twigs.
SR
22-30 HP
Kubota V 2203
cc 2200 - 50 HP
4 - 2800
Kubota V 2403 MT Turbo
cc 2434 - 60 HP
4 - 2600
Diesel 4 stroke water cooled
Self-cleaning
70 Liter
1800 Kg
Simply... The First in its class
Exceptional traction on slopes
1950 Kg
TURBO 5
20 cm
180 cm
195 cm
300 (330) cm
Trelleborg: 26x12.00-12 / 20x10.00-8
12 V 100 Amp.
Complete lighting set.
Electronic control panel with: engine RPM, hour, coolant temp., fuel level, diesel pre-heating, hydro
oil filter, max oil temp., low/ high speed, front and side decks PTO, deck lift controls, diagnostic.
According to CE regulation.
Pump and 2 hydro motor with variable cc Sauer Danfoss on mechanical transaxle with differential.
Differential lock on front axle - permanent 4 wheel drive.
Automatic anti-slip system (patented) - Automatic slow down on turns.
30 lt
Oil tank
2 pedals
Speed control
From 0 to 12 (24) km/h
Forward speed low (high)
From 0 to 6 (12) km/h
Rear speed low (high)
Steering and seat
Power steering.
Steering system
Adjustable deluxe high-backed with arm rest (optional heating).
Seat
Roll over protection structure with roof for sun and rain protection.
Operator protection
Optional glass wind screen with wiper and water tank.
Heating.
With electric-hydraulic actuator - disc brake
PTO
Brakes
Hydrostatic braking through transmission
Operating brake
Disc on front axle x 2
Parking brake
Rear discharge decks
Total working width
210 cm
from cm 165 to cm 310
from cm 155 to cm 300
Front deck
20° floating side wings, 4 discs
165 cm with 4 discs with twin
TEG 1600 flail mower, 150cm
with twin floating blade floating blade - mechanical
working width with mechanical
mechanical transmission - device transmission - device for vertical
transmission,it is possible to
for vertical positioning
positioning - mulching kit
apply the aerator blade.
- mulching kit
Side wings
PG
22-30 HP
Height of cut
Spreader
The First in Efficiency, the First in Manouvrability
The First in Cutting quality, the First in Traction on slopes
The First in Safety, the First in Comfort
FLAIL
56010 Printed in Italy 09.10
GTM
Engine
Model
Displacement - HP
Cylinders - RPM
Type
Pre-filter
Fuel tank
Weight and dimension
Total weight with ROPS
Ground clearance
Min width with wings in
transport position
Total length (with decks)
Wheel
Front - Rear
Electric system
Battery
Instruments
—
100 cm 2 discs with twin floating
blade - 2 ways impact absorbing
system - Variable Working Width
(VWW patented system) with
hydraulic cylinder - device for
vertical positioning - transmission:
hydro motor on gear boxes in oil
bath
From 2 cm to 11 cm with single lever system
100 cm flail mowertransmission with hydraulic
motor - anti shock device
From 2 cm to 10 cm
TURBO 1-1W-2-4
Snow blade
The snow blade can be hydraulically lifted and put in
any position, allowing your Turbo 5 / 6 to be useful and
productive throughout the winter.
OFFICINE BIEFFEBI s.p.a.
Via dell’Artigianato, 7
46023 Gonzaga (MN) Italy
Tel. +39 0376 52641
Fax +39 0376 588270
bieffebi@gianniferrari.com
GIANNI FERRARI s.r.l.
Via Vespucci, 53
42046 Reggiolo (RE) Italy
Tel. +39 0522 973697
Fax +39 0522 973707
info@gianniferrari.com
TURBOLOADER
22-36 HP
www.gianniferrari.com
TURBO 6 FLAIL
The patented anti-slip and anti-scuff permanent 4 wheel drive
system continuously adapts the front and rear axle speed to
allow the 4 wheel to drive the machine on the most difficult
slopes without any scuffing and damage to the lawn. The system
consists of an oversized hydraulic variable flow piston pump,
driving 2 hydraulic variable flow motors, 1 each axle. The patented
ANTI SKID/SCUFF device detects the turning radius allowing a
constant and automatic speed adjustment of the 2 driving axles.
Absolute comfort
The machine is designed to allow the operator to work comfortably
all the day long:
• Deck cutting height is adjusted through a unique single lever
system, extremely quick and easy. For the Turbo 6 the total time
to adjust the 3 decks cutting height is lower than 30 seconds.
It is reduced to 10 seconds for the Turbo 5 deck.
• The deluxe high back seat and the steering wheel support have
several adjustments to fit any operator size. If requested is
available an heated seat model.
• The right arm rest is made of a comfortable cushion including
the control panel with all machine controls and data log.
The traditional levers have been replaced by computerised touch
screen and buttons controlling any machine function,
including PTO engagement, hydraulic, lifts, engine throttle.
• The machine is provided with a rain and sun protection roof
that can be completed with a front glass screen with wiper and
screen washer. (Option)
Safety as a priority
TURBO 6
The machine has been designed, tested and manufactured to
meet all the toughest safety standards.
In addition the machine is equipped with:
• an exclusive automatic speed control system, slowing down
the machine when turning. This, together with a low center of
gravity, make the unit very stable during quick turns.
• A certified very protective ROPS with special locking seat belts
protects the operator in case of roll-over.
Heavy duty construction and easy
maintenance
In their constant bid to improve performance levels, Gianni Ferrari reserves the right to alter any technical aspects or performance, without prior warning.
Likewise the models in this catalogue are subject to change. No liability is accepted for any possible misprints.
28-36 HP
FLAIL
The machine has been designed and built to last several thousands
of hours of tough work with limited maintenance.
Special attention has been given to make maintenance quick and
easy.
Components such as rops, engine hood, fuel tank, radiator can tilt
up for an easy access.
A generous Industrial radiator takes fresh and filtered air from the
top of the machine, not from the rear, and allows continuous operation
in the toughest mowing conditions.
FLAIL
TECHNICAL
SPECIFICATION
15,5-16 HP
Rear discharge/mulching deck
(Turbo 5)
GTS
16-22 HP
With the cutting width of 165 cm it is a very innovative
deck with exceptional performances.
An exclusive adjustment system of the cutting height
allows a fast adjustment without effort.
These decks are very safe and strong even in very
difficult working conditions and have a very good cutting
quality on nice lawn and for rough on golf courses.
The mulching kit allows a better mulching of the grass
avoiding its collection. It is recommended during the
central cutting period or when a perfect surface cleaning
is not required.
GT
22-30 HP
Safety sensors
Transmission
Type
Snow Thrower
Snow Thrower two-stage, 130 cm, hydraulic oriented
and plexiglass protection for the operator.
SRZ
15-27 HP
TURBOGRASS
22 HP
Flail mower
With a working width 155 cm, this heavy duty Flail
Mower is ideal for use on fine grass, weeds and dry
twigs.
SR
22-30 HP
Kubota V 2203
cc 2200 - 50 HP
4 - 2800
Kubota V 2403 MT Turbo
cc 2434 - 60 HP
4 - 2600
Diesel 4 stroke water cooled
Self-cleaning
70 Liter
1800 Kg
Simply... The First in its class
Exceptional traction on slopes
1950 Kg
TURBO 5
20 cm
180 cm
195 cm
300 (330) cm
Trelleborg: 26x12.00-12 / 20x10.00-8
12 V 100 Amp.
Complete lighting set.
Electronic control panel with: engine RPM, hour, coolant temp., fuel level, diesel pre-heating, hydro
oil filter, max oil temp., low/ high speed, front and side decks PTO, deck lift controls, diagnostic.
According to CE regulation.
Pump and 2 hydro motor with variable cc Sauer Danfoss on mechanical transaxle with differential.
Differential lock on front axle - permanent 4 wheel drive.
Automatic anti-slip system (patented) - Automatic slow down on turns.
30 lt
Oil tank
2 pedals
Speed control
From 0 to 12 (24) km/h
Forward speed low (high)
From 0 to 6 (12) km/h
Rear speed low (high)
Steering and seat
Power steering.
Steering system
Adjustable deluxe high-backed with arm rest (optional heating).
Seat
Roll over protection structure with roof for sun and rain protection.
Operator protection
Optional glass wind screen with wiper and water tank.
Heating.
With electric-hydraulic actuator - disc brake
PTO
Brakes
Hydrostatic braking through transmission
Operating brake
Disc on front axle x 2
Parking brake
Rear discharge decks
Total working width
210 cm
from cm 165 to cm 310
from cm 155 to cm 300
Front deck
20° floating side wings, 4 discs
165 cm with 4 discs with twin
TEG 1600 flail mower, 150cm
with twin floating blade floating blade - mechanical
working width with mechanical
mechanical transmission - device transmission - device for vertical
transmission,it is possible to
for vertical positioning
positioning - mulching kit
apply the aerator blade.
- mulching kit
Side wings
PG
22-30 HP
Height of cut
Spreader
The First in Efficiency, the First in Manouvrability
The First in Cutting quality, the First in Traction on slopes
The First in Safety, the First in Comfort
FLAIL
56010 Printed in Italy 09.10
GTM
Engine
Model
Displacement - HP
Cylinders - RPM
Type
Pre-filter
Fuel tank
Weight and dimension
Total weight with ROPS
Ground clearance
Min width with wings in
transport position
Total length (with decks)
Wheel
Front - Rear
Electric system
Battery
Instruments
—
100 cm 2 discs with twin floating
blade - 2 ways impact absorbing
system - Variable Working Width
(VWW patented system) with
hydraulic cylinder - device for
vertical positioning - transmission:
hydro motor on gear boxes in oil
bath
From 2 cm to 11 cm with single lever system
100 cm flail mowertransmission with hydraulic
motor - anti shock device
From 2 cm to 10 cm
TURBO 1-1W-2-4
Snow blade
The snow blade can be hydraulically lifted and put in
any position, allowing your Turbo 5 / 6 to be useful and
productive throughout the winter.
OFFICINE BIEFFEBI s.p.a.
Via dell’Artigianato, 7
46023 Gonzaga (MN) Italy
Tel. +39 0376 52641
Fax +39 0376 588270
bieffebi@gianniferrari.com
GIANNI FERRARI s.r.l.
Via Vespucci, 53
42046 Reggiolo (RE) Italy
Tel. +39 0522 973697
Fax +39 0522 973707
info@gianniferrari.com
TURBOLOADER
22-36 HP
www.gianniferrari.com
TURBO 6 FLAIL
The patented anti-slip and anti-scuff permanent 4 wheel drive
system continuously adapts the front and rear axle speed to
allow the 4 wheel to drive the machine on the most difficult
slopes without any scuffing and damage to the lawn. The system
consists of an oversized hydraulic variable flow piston pump,
driving 2 hydraulic variable flow motors, 1 each axle. The patented
ANTI SKID/SCUFF device detects the turning radius allowing a
constant and automatic speed adjustment of the 2 driving axles.
Absolute comfort
The machine is designed to allow the operator to work comfortably
all the day long:
• Deck cutting height is adjusted through a unique single lever
system, extremely quick and easy. For the Turbo 6 the total time
to adjust the 3 decks cutting height is lower than 30 seconds.
It is reduced to 10 seconds for the Turbo 5 deck.
• The deluxe high back seat and the steering wheel support have
several adjustments to fit any operator size. If requested is
available an heated seat model.
• The right arm rest is made of a comfortable cushion including
the control panel with all machine controls and data log.
The traditional levers have been replaced by computerised touch
screen and buttons controlling any machine function,
including PTO engagement, hydraulic, lifts, engine throttle.
• The machine is provided with a rain and sun protection roof
that can be completed with a front glass screen with wiper and
screen washer. (Option)
Safety as a priority
TURBO 6
The machine has been designed, tested and manufactured to
meet all the toughest safety standards.
In addition the machine is equipped with:
• an exclusive automatic speed control system, slowing down
the machine when turning. This, together with a low center of
gravity, make the unit very stable during quick turns.
• A certified very protective ROPS with special locking seat belts
protects the operator in case of roll-over.
Heavy duty construction and easy
maintenance
In their constant bid to improve performance levels, Gianni Ferrari reserves the right to alter any technical aspects or performance, without prior warning.
Likewise the models in this catalogue are subject to change. No liability is accepted for any possible misprints.
28-36 HP
FLAIL
The machine has been designed and built to last several thousands
of hours of tough work with limited maintenance.
Special attention has been given to make maintenance quick and
easy.
Components such as rops, engine hood, fuel tank, radiator can tilt
up for an easy access.
A generous Industrial radiator takes fresh and filtered air from the
top of the machine, not from the rear, and allows continuous operation
in the toughest mowing conditions.
FLAIL
TURBO 5
TURBO 6
Turbo 5 differs from Turbo 6 for its deck and
for the 50 hp Kubota engine of 2200 cc.
The front floating 210 cm deck is composed
by 1 central unit and 2 up to 20°floating side
wings that follow the uneven terrain . The front
deck allows an excellent visibility for the driver.
With 80 cm right side overhang facilitates the
cutting operations near obstacles (walls and
trees).
The Kubota 4 cylinder turbo charged liquid
cooled engine is providing 60HP smoothly
and quietly, with a generous power surplus.
Three cutting decks with a total cutting width
of 310cm provide a 30.000 sq.m./h max.
productivity.
A maximum speed of 24 km/hr allows quick
transfer on road or lawn.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity and
machine height, an exclusive variable working
width system (VWW) .
This system, unique and patented, allows the
side wings to move in and out to adapt to any
working width between 160cm to 310cm,
avoiding obstacles without lifting the side wing
decks, increasing efficiency and limiting uncut
grass. Superior trimming,unique versatility.
All gear drive for superior,quiet,direct power to
the blades
The right part of the deck can be hydraulically
tilted up vertically. In this way the total width is
limited to 180cm making easier the loading on
a truck.
Productivity is from20.000 to 25.000 sq.m./h.
All Gear Drive, no deck belts
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new
baffle system reduces clumping, leaving a clean
cut surface on whole cutting width.
1) A very efficient 2-way impact absorption system on the wing decks
protects the main frame and the wings themselves from possible
damage from trees, kerbs and other potential obstructions.
2) All 3 decks can be hydraulically tilted up vertically so that cleaning
and blade maintenance are quick and easy.
Anti-shock
A very efficient 2-way impact absorption system
on the side flailmowers protects the main frame
and the flailmowers themselves from possible
damage from trees, kerbs and other potential
obstructions.
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new baffle
system reduces clumping, leaving a clean cut
surface on whole cutting width.
The deck can be hydraulically tilted up vertically
so that cleaning and blade maintenance are
quick and easy.
Flailmowers
Turbo 6 FLAIL
Also for Turbo 6 Flail the Kubota 4 cylinder
turbo charged liquid cooled engine is providing
60HP smoothly and quietly, with a generous
power surplus. The three independent
flailmowers with a total cutting width of 300cm
provide a 30.000 sq.m./h max. productivity.
310 cm
250 cm
The three flailmowers allow an excellent cutting
and above all an excellent grass distribution.
Its is ideal both for quality cutting job and for
very rough lawn.
I 3 trinciaerba possono essere equipaggiati di
3 tipi di coltelli da taglio:
1) Y blade (standard):
good in all condition, strong and cheap.
Excellent grass clipping.
2) Light delta blade (optional).
Excellent cutting quality. The cut grass remains
slightly longer in comparison to Y blade.
3) Heavy delta blade (optional).
Excellent cutting quality, excellent life. The cut
grass remains slightly longer in comparison to
Y blade.
4) The front flailmower can be also equipped
with aerator blades. This can be used alone
(left blade in the photo) or togheter with Y blade
(blade in the center) or light delta blade (right
blade in the photo).
1
2
A maximum speed of 24 km/hr allows very
quick transfers.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity, and
limited machine height and to 3 independent
flailmowers.
3
± 20°
± 20°
4
FLAIL
TURBO 5
TURBO 6
Turbo 5 differs from Turbo 6 for its deck and
for the 50 hp Kubota engine of 2200 cc.
The front floating 210 cm deck is composed
by 1 central unit and 2 up to 20°floating side
wings that follow the uneven terrain . The front
deck allows an excellent visibility for the driver.
With 80 cm right side overhang facilitates the
cutting operations near obstacles (walls and
trees).
The Kubota 4 cylinder turbo charged liquid
cooled engine is providing 60HP smoothly
and quietly, with a generous power surplus.
Three cutting decks with a total cutting width
of 310cm provide a 30.000 sq.m./h max.
productivity.
A maximum speed of 24 km/hr allows quick
transfer on road or lawn.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity and
machine height, an exclusive variable working
width system (VWW) .
This system, unique and patented, allows the
side wings to move in and out to adapt to any
working width between 160cm to 310cm,
avoiding obstacles without lifting the side wing
decks, increasing efficiency and limiting uncut
grass. Superior trimming,unique versatility.
All gear drive for superior,quiet,direct power to
the blades
The right part of the deck can be hydraulically
tilted up vertically. In this way the total width is
limited to 180cm making easier the loading on
a truck.
Productivity is from20.000 to 25.000 sq.m./h.
All Gear Drive, no deck belts
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new
baffle system reduces clumping, leaving a clean
cut surface on whole cutting width.
1) A very efficient 2-way impact absorption system on the wing decks
protects the main frame and the wings themselves from possible
damage from trees, kerbs and other potential obstructions.
2) All 3 decks can be hydraulically tilted up vertically so that cleaning
and blade maintenance are quick and easy.
Anti-shock
A very efficient 2-way impact absorption system
on the side flailmowers protects the main frame
and the flailmowers themselves from possible
damage from trees, kerbs and other potential
obstructions.
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new baffle
system reduces clumping, leaving a clean cut
surface on whole cutting width.
The deck can be hydraulically tilted up vertically
so that cleaning and blade maintenance are
quick and easy.
Flailmowers
Turbo 6 FLAIL
Also for Turbo 6 Flail the Kubota 4 cylinder
turbo charged liquid cooled engine is providing
60HP smoothly and quietly, with a generous
power surplus. The three independent
flailmowers with a total cutting width of 300cm
provide a 30.000 sq.m./h max. productivity.
310 cm
250 cm
The three flailmowers allow an excellent cutting
and above all an excellent grass distribution.
Its is ideal both for quality cutting job and for
very rough lawn.
I 3 trinciaerba possono essere equipaggiati di
3 tipi di coltelli da taglio:
1) Y blade (standard):
good in all condition, strong and cheap.
Excellent grass clipping.
2) Light delta blade (optional).
Excellent cutting quality. The cut grass remains
slightly longer in comparison to Y blade.
3) Heavy delta blade (optional).
Excellent cutting quality, excellent life. The cut
grass remains slightly longer in comparison to
Y blade.
4) The front flailmower can be also equipped
with aerator blades. This can be used alone
(left blade in the photo) or togheter with Y blade
(blade in the center) or light delta blade (right
blade in the photo).
1
2
A maximum speed of 24 km/hr allows very
quick transfers.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity, and
limited machine height and to 3 independent
flailmowers.
3
± 20°
± 20°
4
FLAIL
TURBO 5
TURBO 6
Turbo 5 differs from Turbo 6 for its deck and
for the 50 hp Kubota engine of 2200 cc.
The front floating 210 cm deck is composed
by 1 central unit and 2 up to 20°floating side
wings that follow the uneven terrain . The front
deck allows an excellent visibility for the driver.
With 80 cm right side overhang facilitates the
cutting operations near obstacles (walls and
trees).
The Kubota 4 cylinder turbo charged liquid
cooled engine is providing 60HP smoothly
and quietly, with a generous power surplus.
Three cutting decks with a total cutting width
of 310cm provide a 30.000 sq.m./h max.
productivity.
A maximum speed of 24 km/hr allows quick
transfer on road or lawn.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity and
machine height, an exclusive variable working
width system (VWW) .
This system, unique and patented, allows the
side wings to move in and out to adapt to any
working width between 160cm to 310cm,
avoiding obstacles without lifting the side wing
decks, increasing efficiency and limiting uncut
grass. Superior trimming,unique versatility.
All gear drive for superior,quiet,direct power to
the blades
The right part of the deck can be hydraulically
tilted up vertically. In this way the total width is
limited to 180cm making easier the loading on
a truck.
Productivity is from20.000 to 25.000 sq.m./h.
All Gear Drive, no deck belts
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new
baffle system reduces clumping, leaving a clean
cut surface on whole cutting width.
1) A very efficient 2-way impact absorption system on the wing decks
protects the main frame and the wings themselves from possible
damage from trees, kerbs and other potential obstructions.
2) All 3 decks can be hydraulically tilted up vertically so that cleaning
and blade maintenance are quick and easy.
Anti-shock
A very efficient 2-way impact absorption system
on the side flailmowers protects the main frame
and the flailmowers themselves from possible
damage from trees, kerbs and other potential
obstructions.
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new baffle
system reduces clumping, leaving a clean cut
surface on whole cutting width.
The deck can be hydraulically tilted up vertically
so that cleaning and blade maintenance are
quick and easy.
Flailmowers
Turbo 6 FLAIL
Also for Turbo 6 Flail the Kubota 4 cylinder
turbo charged liquid cooled engine is providing
60HP smoothly and quietly, with a generous
power surplus. The three independent
flailmowers with a total cutting width of 300cm
provide a 30.000 sq.m./h max. productivity.
310 cm
250 cm
The three flailmowers allow an excellent cutting
and above all an excellent grass distribution.
Its is ideal both for quality cutting job and for
very rough lawn.
I 3 trinciaerba possono essere equipaggiati di
3 tipi di coltelli da taglio:
1) Y blade (standard):
good in all condition, strong and cheap.
Excellent grass clipping.
2) Light delta blade (optional).
Excellent cutting quality. The cut grass remains
slightly longer in comparison to Y blade.
3) Heavy delta blade (optional).
Excellent cutting quality, excellent life. The cut
grass remains slightly longer in comparison to
Y blade.
4) The front flailmower can be also equipped
with aerator blades. This can be used alone
(left blade in the photo) or togheter with Y blade
(blade in the center) or light delta blade (right
blade in the photo).
1
2
A maximum speed of 24 km/hr allows very
quick transfers.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity, and
limited machine height and to 3 independent
flailmowers.
3
± 20°
± 20°
4
FLAIL
TURBO 5
TURBO 6
Turbo 5 differs from Turbo 6 for its deck and
for the 50 hp Kubota engine of 2200 cc.
The front floating 210 cm deck is composed
by 1 central unit and 2 up to 20°floating side
wings that follow the uneven terrain . The front
deck allows an excellent visibility for the driver.
With 80 cm right side overhang facilitates the
cutting operations near obstacles (walls and
trees).
The Kubota 4 cylinder turbo charged liquid
cooled engine is providing 60HP smoothly
and quietly, with a generous power surplus.
Three cutting decks with a total cutting width
of 310cm provide a 30.000 sq.m./h max.
productivity.
A maximum speed of 24 km/hr allows quick
transfer on road or lawn.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity and
machine height, an exclusive variable working
width system (VWW) .
This system, unique and patented, allows the
side wings to move in and out to adapt to any
working width between 160cm to 310cm,
avoiding obstacles without lifting the side wing
decks, increasing efficiency and limiting uncut
grass. Superior trimming,unique versatility.
All gear drive for superior,quiet,direct power to
the blades
The right part of the deck can be hydraulically
tilted up vertically. In this way the total width is
limited to 180cm making easier the loading on
a truck.
Productivity is from20.000 to 25.000 sq.m./h.
All Gear Drive, no deck belts
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new
baffle system reduces clumping, leaving a clean
cut surface on whole cutting width.
1) A very efficient 2-way impact absorption system on the wing decks
protects the main frame and the wings themselves from possible
damage from trees, kerbs and other potential obstructions.
2) All 3 decks can be hydraulically tilted up vertically so that cleaning
and blade maintenance are quick and easy.
Anti-shock
A very efficient 2-way impact absorption system
on the side flailmowers protects the main frame
and the flailmowers themselves from possible
damage from trees, kerbs and other potential
obstructions.
The high tip blade speed, the unique twin
floating blade system and special deck design
with front swinging doors allow a perfect cutting
quality even at high working speed. A new baffle
system reduces clumping, leaving a clean cut
surface on whole cutting width.
The deck can be hydraulically tilted up vertically
so that cleaning and blade maintenance are
quick and easy.
Flailmowers
Turbo 6 FLAIL
Also for Turbo 6 Flail the Kubota 4 cylinder
turbo charged liquid cooled engine is providing
60HP smoothly and quietly, with a generous
power surplus. The three independent
flailmowers with a total cutting width of 300cm
provide a 30.000 sq.m./h max. productivity.
310 cm
250 cm
The three flailmowers allow an excellent cutting
and above all an excellent grass distribution.
Its is ideal both for quality cutting job and for
very rough lawn.
I 3 trinciaerba possono essere equipaggiati di
3 tipi di coltelli da taglio:
1) Y blade (standard):
good in all condition, strong and cheap.
Excellent grass clipping.
2) Light delta blade (optional).
Excellent cutting quality. The cut grass remains
slightly longer in comparison to Y blade.
3) Heavy delta blade (optional).
Excellent cutting quality, excellent life. The cut
grass remains slightly longer in comparison to
Y blade.
4) The front flailmower can be also equipped
with aerator blades. This can be used alone
(left blade in the photo) or togheter with Y blade
(blade in the center) or light delta blade (right
blade in the photo).
1
2
A maximum speed of 24 km/hr allows very
quick transfers.
The machine is very compact and very
manoeuvrable. This is possible due to a very
tight turning radius, a low center of gravity, and
limited machine height and to 3 independent
flailmowers.
3
± 20°
± 20°
4
FLAIL
TECHNICAL
SPECIFICATION
15,5-16 HP
Rear discharge/mulching deck
(Turbo 5)
GTS
16-22 HP
With the cutting width of 165 cm it is a very innovative
deck with exceptional performances.
An exclusive adjustment system of the cutting height
allows a fast adjustment without effort.
These decks are very safe and strong even in very
difficult working conditions and have a very good cutting
quality on nice lawn and for rough on golf courses.
The mulching kit allows a better mulching of the grass
avoiding its collection. It is recommended during the
central cutting period or when a perfect surface cleaning
is not required.
GT
22-30 HP
Safety sensors
Transmission
Type
Snow Thrower
Snow Thrower two-stage, 130 cm, hydraulic oriented
and plexiglass protection for the operator.
SRZ
15-27 HP
TURBOGRASS
22 HP
Flail mower
With a working width 155 cm, this heavy duty Flail
Mower is ideal for use on fine grass, weeds and dry
twigs.
SR
22-30 HP
Kubota V 2203
cc 2200 - 50 HP
4 - 2800
Kubota V 2403 MT Turbo
cc 2434 - 60 HP
4 - 2600
Diesel 4 stroke water cooled
Self-cleaning
70 Liter
1800 Kg
Simply... The First in its class
Exceptional traction on slopes
1950 Kg
TURBO 5
20 cm
180 cm
195 cm
300 (330) cm
Trelleborg: 26x12.00-12 / 20x10.00-8
12 V 100 Amp.
Complete lighting set.
Electronic control panel with: engine RPM, hour, coolant temp., fuel level, diesel pre-heating, hydro
oil filter, max oil temp., low/ high speed, front and side decks PTO, deck lift controls, diagnostic.
According to CE regulation.
Pump and 2 hydro motor with variable cc Sauer Danfoss on mechanical transaxle with differential.
Differential lock on front axle - permanent 4 wheel drive.
Automatic anti-slip system (patented) - Automatic slow down on turns.
30 lt
Oil tank
2 pedals
Speed control
From 0 to 12 (24) km/h
Forward speed low (high)
From 0 to 6 (12) km/h
Rear speed low (high)
Steering and seat
Power steering.
Steering system
Adjustable deluxe high-backed with arm rest (optional heating).
Seat
Roll over protection structure with roof for sun and rain protection.
Operator protection
Optional glass wind screen with wiper and water tank.
Heating.
With electric-hydraulic actuator - disc brake
PTO
Brakes
Hydrostatic braking through transmission
Operating brake
Disc on front axle x 2
Parking brake
Rear discharge decks
Total working width
210 cm
from cm 165 to cm 310
from cm 155 to cm 300
Front deck
20° floating side wings, 4 discs
165 cm with 4 discs with twin
TEG 1600 flail mower, 150cm
with twin floating blade floating blade - mechanical
working width with mechanical
mechanical transmission - device transmission - device for vertical
transmission,it is possible to
for vertical positioning
positioning - mulching kit
apply the aerator blade.
- mulching kit
Side wings
PG
22-30 HP
Height of cut
Spreader
The First in Efficiency, the First in Manouvrability
The First in Cutting quality, the First in Traction on slopes
The First in Safety, the First in Comfort
FLAIL
56010 Printed in Italy 09.10
GTM
Engine
Model
Displacement - HP
Cylinders - RPM
Type
Pre-filter
Fuel tank
Weight and dimension
Total weight with ROPS
Ground clearance
Min width with wings in
transport position
Total length (with decks)
Wheel
Front - Rear
Electric system
Battery
Instruments
—
100 cm 2 discs with twin floating
blade - 2 ways impact absorbing
system - Variable Working Width
(VWW patented system) with
hydraulic cylinder - device for
vertical positioning - transmission:
hydro motor on gear boxes in oil
bath
From 2 cm to 11 cm with single lever system
100 cm flail mowertransmission with hydraulic
motor - anti shock device
From 2 cm to 10 cm
TURBO 1-1W-2-4
Snow blade
The snow blade can be hydraulically lifted and put in
any position, allowing your Turbo 5 / 6 to be useful and
productive throughout the winter.
OFFICINE BIEFFEBI s.p.a.
Via dell’Artigianato, 7
46023 Gonzaga (MN) Italy
Tel. +39 0376 52641
Fax +39 0376 588270
bieffebi@gianniferrari.com
GIANNI FERRARI s.r.l.
Via Vespucci, 53
42046 Reggiolo (RE) Italy
Tel. +39 0522 973697
Fax +39 0522 973707
info@gianniferrari.com
TURBOLOADER
22-36 HP
www.gianniferrari.com
TURBO 6 FLAIL
The patented anti-slip and anti-scuff permanent 4 wheel drive
system continuously adapts the front and rear axle speed to
allow the 4 wheel to drive the machine on the most difficult
slopes without any scuffing and damage to the lawn. The system
consists of an oversized hydraulic variable flow piston pump,
driving 2 hydraulic variable flow motors, 1 each axle. The patented
ANTI SKID/SCUFF device detects the turning radius allowing a
constant and automatic speed adjustment of the 2 driving axles.
Absolute comfort
The machine is designed to allow the operator to work comfortably
all the day long:
• Deck cutting height is adjusted through a unique single lever
system, extremely quick and easy. For the Turbo 6 the total time
to adjust the 3 decks cutting height is lower than 30 seconds.
It is reduced to 10 seconds for the Turbo 5 deck.
• The deluxe high back seat and the steering wheel support have
several adjustments to fit any operator size. If requested is
available an heated seat model.
• The right arm rest is made of a comfortable cushion including
the control panel with all machine controls and data log.
The traditional levers have been replaced by computerised touch
screen and buttons controlling any machine function,
including PTO engagement, hydraulic, lifts, engine throttle.
• The machine is provided with a rain and sun protection roof
that can be completed with a front glass screen with wiper and
screen washer. (Option)
Safety as a priority
TURBO 6
The machine has been designed, tested and manufactured to
meet all the toughest safety standards.
In addition the machine is equipped with:
• an exclusive automatic speed control system, slowing down
the machine when turning. This, together with a low center of
gravity, make the unit very stable during quick turns.
• A certified very protective ROPS with special locking seat belts
protects the operator in case of roll-over.
Heavy duty construction and easy
maintenance
In their constant bid to improve performance levels, Gianni Ferrari reserves the right to alter any technical aspects or performance, without prior warning.
Likewise the models in this catalogue are subject to change. No liability is accepted for any possible misprints.
28-36 HP
FLAIL
The machine has been designed and built to last several thousands
of hours of tough work with limited maintenance.
Special attention has been given to make maintenance quick and
easy.
Components such as rops, engine hood, fuel tank, radiator can tilt
up for an easy access.
A generous Industrial radiator takes fresh and filtered air from the
top of the machine, not from the rear, and allows continuous operation
in the toughest mowing conditions.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising