SleekSimplicity meets Introducing the Slim 3M Macurco Carbon Monoxide Detector CM-E1 ™ ™ The 3M Macurco CM-E1 combines sophisticated sleekness with a smooth and easy installation system to provide state-of-the-art carbon monoxide detection in residential and commercial office environments. Sleek. • Innovative Slim Design: Unlike other carbon monoxide detectors, the sleek CM-E1 unit extends less than ½" from the wall when flush mounted, so it blends seamlessly with your room’s design elements. Simple. • Speed Mount Installation: Designed with your industry in mind, the CM-E1 offers the exclusive 3M Speed Mount design, featuring a snap-in wire harness for swift and easy installation. • Field Testable: Patented 3M EZ-Check technology allows installers to quickly test the CO sensor on site. • 9- to 32-Volt Input: Compatible with 12-volt security systems and 24- to 30-volt fire alarm systems. The CM-E1 works for all your system installation needs. • Expiration Functionality: Takes the guesswork out of determining when the CO detector has reached its end of life and needs replacing. Certified. • Time-Honored Quality: The CM-E1 unit is backed by Macurco’s reliable brand quality and 3M’s history of customer dedication and satisfaction. • NFPA® 720-2009: The CM-E1 design meets the NFPA® 720-2009 standard requiring CO sensor functionality and sensitivity testing effective 2012 and 2015 respectively. • UL 2075 listed: Certified for system installation in both residential and commercial applications. Other 3M Macurco Carbon Monoxide Detector CM-E1 Features ™ ™ UL Standards: • Listed to UL Standard 2075, Standard for Safety for Gas and Vapor Detectors and Sensors. • Tested to UL 2075 using UL 2034 sensitivity limits for carbon monoxide gas. Flush or Surface Mountable: • Surface mounts to a wall using the supplied enclosure rear housing. • Flush mounts in a 2" x 4" (1½" deep minimum) single gang switch or handy electrical box. Testing: • Test & Reset switch conducts internal tests and actuates Alarm Relay. • N.O. or N.C. SPST Alarm Relay and N.C. SPST Trouble Relay to connect to Alarm Control Panels. • Produces repeating loud tone bursts or buzzes during alarm and chirps if sensor trouble is found. • Microcomputer control allows for a mostly automatic operation. CM-E1 Alarm Relay • GREEN: Normal operation. • FLASHING AMBER: Trouble, contact your installer or 3M Macurco Tech Support. • RED: Danger! Move to fresh air (hazardous condition is present). Trouble Relay: SPST 100mA, 40VDC dry contacts, no polarity Green Gray Trouble Relay Visual Display: Alarm Relay: SPST 100mA, 40VDC dry contacts, no polarity Blue Yellow Black (-) Red (+) GND 9-32VDC UL Listed Class 2 Power Source: 9 to 32VDC Note: There is a jumper on the PCA to change the alarm output. Remove the jumper for N.C. or leave the jumper in place for N.O. Specifications For More Information In U.S., contact: Website: www.3M.com/Macurco Technical Assistance: 1-800-243-4630 Occupational Health & Environmental Safety Division 3M Center, Building 235-02-W-70 St. Paul, MN 55144-1000 www.3M.com/OccSafety Typical connection of two CM-E1 detectors to an alarm control panel: UL Listed Alarm Control Panel N.O. Initiating circuit Battery-backed 12 or 24 VDC Power Supply. Fuse or current limit at 0.2 A for each CM-E1 GND CM-E1 CM-E1 Alarm Relay Blue Yellow Alarm Relay Blue Yellow Trouble N.C. Relay Green Gray Trouble N.C. Relay Green Gray GND 9-32VDC Part No. Description CM-E1 3M Macurco Carbon Monoxide Detector Black (-) Red (+) GND 9-32VDC E.O.L.R. Voltage: 9-32 VDC Current (normal/alarm): 15mA /35mA @ 9-32V Size: 3 1⁄8" x 5 1⁄8" x 1½" Alarm Relay: SPST, 100mA, 40VDC Trouble Relay: SPST 100mA, 40VDC Buzzer Rating: 85 dBA at 10 feet Shipping Weight: One pound Operating Temp. Range: 40° to 100° F Alarm Setting: Per UL 2034 Color: White Designed for use with a UL Listed alarm control panel. (May be used with a UL Listed Class 2 Power Supply.) Black (-) Red (+) UPC No. Qty/Case 0 0783748 81415 2 1 0 0051131 17237 1 1 3M™ Carbon Monoxide Field Verification Gas Kit includes CM E1-FTK 17L 200 PPM CO/Air, regulator, test hood and Tygon tubing 0 0051131 17238 8 (for use with CM-E1 CO sensitivity test) 1 ™ ™ ™ CM E1-FTG 3M Carbon Monoxide Field Test Gas 11L 500 PPM CO/Air, Aerosol (for use with CM-E1 CO functionality test) ® 3M and Macurco are trademarks of 3M. Tygon is a registered trademark of Saint-Gobain Corporation. NFPA is a trademark of National Fire Protection Association. Please recycle. Printed in USA. © 2009 3M Company. All rights reserved. 70-0714-8856-6 WARNING IMPORTANT: To help avoid false alarms, the CM-E1 is not intended for low level detection (below 30ppm) of Carbon Monoxide, per UL 2034. Individuals with medical problems should consider using warning devices that provide audible and visual signals for carbon monoxide concentrations under 30ppm. The CM-E1 is intended for use in ordinary indoor locations of family living units and office work spaces. It is not designed to measure compliance with Occupational Safety and Health Administration (OSHA) commercial or industrial standards.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project