BelgacomTwistTM 698 Belg acom T
Belgacom Twist 698
TM
A31008-M1805-E151-1-7419
User manual
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / overview.fm / 13.10.2008
The handset at a glance
The handset at a glance
1 Direct dialling keys (I to IV)
2 Display in idle status (example)
3 Battery charge level
eVU
(1/3 charged to fully charged)
1
U
2
3
09:19
§§Menu §
4
12
5
11
6
10
9
= flashes: battery almost flat
e V U flashes: battery charging
4 Display keys (page 12)
5 Control key (page 12)
6 End call key, On/off key
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold), activate/deactivate handset
(press and hold in idle status)
7 Hash key
Keypad lock on/off (press and hold in
idle status, page 12)
Insert a pause (press and hold for dialling)
Switch between uppercase/lowercase letters and digits for text entry (page 31)
8 Microphone
9 Recall key
Enter flash (press and hold)
10 Connection socket for headset
11 Talk key
Answer a call, start dialling
12 Handsfree key
Toggle between earpiece and
handsfree mode
Lights up: handsfree activated
Flashes: incoming call
7
8
Base station at a glance
Version 4, 16.09.2005
1
1 Registration/paging key
1
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / E360IVZ.fm / 05.07.2007
Contents
Contents
The handset at a glance . . . . . . . 1
Base station at a glance . . . . . . . . 1
Safety precautions . . . . . . . . . . . . 4
Special features of the
Twist 698 . . . . . . . . . . . . . . . . . . . . 5
Twist 698 –
more than just a telephone . . . . . 5
First steps . . . . . . . . . . . . . . . . . . . . 5
Pack contents . . . . . . . . . . . . . . . . . . . .
Installing the base station . . . . . . . . . .
Connecting the base station . . . . . . . .
Setting up the handset for use . . . . . . .
Changing the display language . . . . . .
5
5
6
6
8
Menu tree . . . . . . . . . . . . . . . . . . . 9
Making calls . . . . . . . . . . . . . . . . . 11
Making an external call/ending
a call . . . . . . . . . . . . . . . . . . . . . . . . . .
Answering a call . . . . . . . . . . . . . . . . .
Calling line identification . . . . . . . . . .
Handsfree operation . . . . . . . . . . . . .
11
11
11
11
Operating the handset . . . . . . . . 12
Version 4, 16.09.2005
Switching the handset on/off . . . . . . .
Activating/deactivating the
keypad lock . . . . . . . . . . . . . . . . . . . . .
Control key on the handset . . . . . . . .
Display keys . . . . . . . . . . . . . . . . . . . .
Returning to idle status . . . . . . . . . . .
Menu guidance . . . . . . . . . . . . . . . . .
Correcting incorrect entries . . . . . . . .
2
Using the directory, direct
dialling keys and lists . . . . . . . . 13
Directory . . . . . . . . . . . . . . . . . . . . . . .
Direct diallingkeys . . . . . . . . . . . . . . . .
Last number redial list . . . . . . . . . . . .
Opening the message list with
the display key . . . . . . . . . . . . . . . . . .
13
15
15
15
SMS (text messages) . . . . . . . . . 17
Writing/sending an SMS . . . . . . . . . . .
Receiving an SMS . . . . . . . . . . . . . . . .
Setting up the SMS centre . . . . . . . . .
SMS to a PABX . . . . . . . . . . . . . . . . . . .
Activating/deactivating the SMS
function . . . . . . . . . . . . . . . . . . . . . . . .
SMS troubleshooting . . . . . . . . . . . . .
17
18
19
19
19
20
Using the network mailbox . . . 21
Using the network mailbox for
setting speed dialling . . . . . . . . . . . . . 21
Viewing the network mailbox
message . . . . . . . . . . . . . . . . . . . . . . . 21
Using several handsets . . . . . . . 21
Registering handsets . . . . . . . . . . . . . .
Locating a handset ("Paging") . . . . . . .
Making internal calls . . . . . . . . . . . . . .
Listening in to an external call . . . . . .
21
22
22
23
12
Handset settings . . . . . . . . . . . . 23
12
12
12
13
13
13
Changing the display language . . . . .
Screensaver . . . . . . . . . . . . . . . . . . . . .
Auto answer . . . . . . . . . . . . . . . . . . . .
Adjusting the loudspeaker volume . . .
Changing ringtones . . . . . . . . . . . . . .
Activating/deactivation
suppression of the first ringtone . . . .
Advisory tones . . . . . . . . . . . . . . . . . .
23
23
23
24
24
24
24
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / E360IVZ.fm / 05.07.2007
Contents
Using the handset as an
alarm clock . . . . . . . . . . . . . . . . . . . . . 25
Restoring the handset default
settings . . . . . . . . . . . . . . . . . . . . . . . . 25
Base station settings . . . . . . . . . . 25
Changing the system PIN . . . . . . . . . . 25
Restoring the base station to
factory settings . . . . . . . . . . . . . . . . . . 26
Operating the base station
on the PABX . . . . . . . . . . . . . . . . . 26
Appendix . . . . . . . . . . . . . . . . . . . 27
Symbols and typographical
conventions used . . . . . . . . . . . . . . . .
Care . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact with liquid . . . . . . . . . . . . . . .
Questions and answers . . . . . . . . . . .
Declaration of Conformity . . . . . . . . .
Environment . . . . . . . . . . . . . . . . . . . .
Technical data . . . . . . . . . . . . . . . . . . .
Guarantee terms . . . . . . . . . . . . . . . .
Writing and editing a text message . .
27
27
27
27
28
29
29
30
31
Wall mounting for base station . 32
Version 4, 16.09.2005
Index . . . . . . . . . . . . . . . . . . . . . . . 33
3
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / security.fm / 13.10.2008
Safety precautions
Safety precautions
Caution:
Read the safety precautions and the user guide before use.
Explain their contents to your children as well as the potential hazards associated with using the telephone.
$
‹
Œ
Only use the mains adapter supplied, as indicated on the underside of the base
station.
Only fit the recommended rechargeable batteries of the same type! In other
words, do not use any other battery type or non-rechargeable batteries as this
could result in significant health risks and personal injury.
Fit rechargeable batteries with the correct polarity and use them according to
this user guide (polarity symbols can be seen in the handset's battery compartment, page 6).
The operation of medical appliances may be affected. Be aware of the technical
conditions in your particular environment, for example doctor's surgery.
Do not hold the reverse side of the handset to your ear if the handset is ringing
or if the handsfree function is switched on. Otherwise, you risk developing serious, permanent hearing damage.
The handset may cause an unpleasant humming noise in hearing aids.
Do not install the base station in bathrooms or shower rooms. The handset and
base station are not splash proof (page 27).
Do not use the phone in environments with a potential explosion hazard, for
example auto paint shops.
ƒ
If you give your telephone to someone else, make sure you also give them the
user guide.
Version 4, 16.09.2005
All electrical and electronic products should be disposed separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliances will help prevent potential negative consequences for the environment and human health.
It is a precondition for reuse and recycling of used electrical and electronic
equipment.
For further detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you purchased
the product.
4
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / starting.fm / 13.10.2008
Special features of the Twist 698
Special features of the
Twist 698
u Large keys
u Text and symbols are shown clearly in
u
u
u
u
large type on the display
Jumbo Font
Direct dialling keys
Compatibility with hearing aids
(HAC – Hearing Aid Compatibility)
Connection for headset (headset not
included in scope of delivery)
Twist 698 –
more than just a telephone
Your phone not only enables you to send
and receive text messages over the fixed
network and store up to 100 telephone
numbers (page 13) – it can do a whole lot
more:
u You can programme the direct dialling
keys of your phone with important
phone numbers. The number is then
dialled by simply pressing a key
(page 15).
u Use the handsfree function (page 11)
to keep your hands free when making
a call.
u Use your handset as an alarm clock
(page 25).
First steps
Pack contents
The packaging contains a Twist 698 base
station, a handset, a mains adapter, a telephone cable, two batteries, a battery
cover, a belt clip and a user guide.
Installing the base station
The base is designed to be operated in
enclosed, dry areas at temperatures ranging from +5 °C to +45 °C.
Set up the base station at a central point in
the apartment or house.
Please refer to the end of the user guide
for information on wall-mounting the
base station.
Please remember:
u Never expose the telephone to heat
sources, direct sunlight, other electrical
appliances.
u Protect your telephone from moisture,
dust, corrosive liquids and vapours.
ECO DECT - what does it mean?
-Transmitting power is switched off when the
handset is placed in the base station.
The transmitting power of the base station is
switched off when only 1 handset is registered
on the base station!
Version 4, 16.09.2005
Additionally, your handset automatically
reduces transmitting power depending on the
distance to the base station (close-up range).
Have fun using your new telephone!
5
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / starting.fm / 13.10.2008
First steps
Connecting the base station
¤ First connect the mains adapter and
then the phone jack as shown below
and place the phone cord in the cord
recess.
Setting up the handset for use
Fitting the batteries and closing the
cover
Caution:
Use only the rechargeable batteries recommended. In other words, never use a conventional (non-rechargeable) battery or other battery types as this could result in significant
health risks and personal injury. For example,
the outer casing of the batteries or accumulators could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
1
¤ Fit the batteries with the correct polar-
ity (see diagram).
The polarity is indicated in the battery
compartment.
3
1
1 Underside of the base (section)
2 Mains adapter 230 V
3 Phone jack with phone cord
Please remember:
u Keep the mains adapter plugged in at
all times for operation as the phone
does not work without mains
connection.
u If you buy a replacement phone cord
from a store ensure that the phone jack
is connected correctly.
Version 4, 16.09.2005
Correct phone jack assignment
3
2
1
6
4
5
6
1
2
3
4
5
6
unused
unused
a
b
unused
unused
¤ First align the notches on the side of
¤
the battery cover with the protrusions
of the inside of the casing.
Then press down the cover so that it
clicks into place.
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / starting.fm / 13.10.2008
First steps
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤ Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
You can also attach a cord for carrying the
handset in your hand or wearing it around
your neck.
Opening the battery cover
¤ If fitted, remove the belt clip.
¤ Reach into the housing cavity and pull
the battery cover upwards.
Automatic registration can take up to
5 minutes. While registration is in
progress the screen displays Registering .
The handset is assigned the lowest unassigned internal number (1–4). If several
handsets are registered on the base, the
internal number is shown in the display
after registration, for example 2. This
means that the handset has been assigned
the internal number 2.
Notes:
– Automatic registration is only possible if
the base station on which you wish to register the handset is not being used to make
a call.
– A key press cancels automatic registration.
– If four handsets are already registered on
the base station there are two options:
– The handset with the internal number 4
is in idle status: the handset you wish to
register is assigned the number 4. The
handset that was previously number 4 is
de-registered.
– The handset with the internal number 4
is being used: the handset you wish to
register cannot be registered.
– If automatic registration does not work the
handset will have to be registered manually
(page 21).
¤ To charge the batteries, leave the handset in the charging cradle on the
base station.
Notes:
Version 4, 16.09.2005
Placing the handset in the base station
and registering
Requirement: the handset must not
already be registered on any base station.
Registering the handset on the Twist 698
base station occurs automatically.
¤ Place the handset in the charging cradle of the base station with its display
facing forward.
You will hear a confirmation tone.
– The handset may only be placed in the
base/charging cradle provided for it.
– If the handset has switched itself off
because the batteries are flat and is then
placed in the base/cradle, it will switch
itself on automatically.
For questions and problems see page 27.
7
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / starting.fm / 13.10.2008
First steps
Initial charging and discharging of
batteries
Battery charging is indicated in the top
right of the display by a flashing battery
icon e, V or U. During handset
operation, the battery icon indicates the
charge status of the batteries (page 1).
The correct charge status can only be displayed when the batteries are first fully
charged and discharged through use.
¤ To do this, leave the handset in the
base without interruption until the battery icon stops flashing in the display
(approx. 13h).
¤ Once the batteries are fully charged,
remove the handset from the base and
do not put it back again until the batteries are fully discharged.
Note:
After the first battery charge and discharge
you may replace your handset in its base after
every call.
Please remember:
u Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and reinsert them.
u The batteries may warm up as they are
charging. This is not dangerous.
u After a time the charge capacity of the
batteries will decrease for technical reasons.
Note:
Version 4, 16.09.2005
You will find explanations for the symbols and
typographical conventions used in this user
guide in the appendix, page 27.
8
Changing the display language
You can view the display texts in different
languages.
§Menu§ ¢ Settings ¢ §OK§ ¢ Language
¢ §OK§ ¢ q (Choose language)
¢ §OK§
The current language is indicated by ‰.
If you accidentally choose a language you
do not understand:
§Menu§ ¢ L I ¢ q
(Choose language) ¢ §OK§
Setting the date and time
¢ Settings ¢ §OK§ ¢ Date/Time
¢ §OK§
§Menu§
~
~
Enter the day, month and year
with 6 digits and press §OK§. Use
q to move between the
fields.
Enter hours and minutes with
4 digits (e.g. 0 7 1 5 for
07.15 hrs) and press §OK§.
Use q to move between the
fields.
Once the phone is registered and the
time set, the idle display looks as shown
on page 1.
Your phone is now ready for use.
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / menuetree.fm / 13.10.2008
Menu tree
Menu tree
There are two ways to select a function:
Using number combinations ("shortcut")
¤ To open the main menu, press §Menu§ with the handset in idle status.
¤ Enter the number combination that is in front of the function in the menu tree.
¤ Example: §Menu§ L I for "Set handset language".
Scrolling through the menus (see also page 27)
¤ To open the main menu, press §Menu§ with the handset in idle status.
¤ Scroll to the required function with the control key and press §OK§.
1
Directory
2
Calls
3
3-1
3-2
3-3
3-4
SMS
Write Message
Incoming 00+00
Outgoing
Settings
3-4-1 Service Centres
3-4-1-1 Service Centre 1
…
[to]
3-4-1-3 Service Centre 3
4
Alarm
4-1 Activation
4-2 Wakeup time
5
5-1
5-2
5-3
5-4
Audio Settings
Handset Volume
Handsfree Volume
Ringer Volume
Ringer Melody
5-5 Advisory Tones
5-6 Battery Low
5-4-1 External Calls
5-4-2 Internal Calls
5-4-3 Alarm Clock
5-6-1 Off
5-6-2 On
5-6-3 During Call
Version 4, 16.09.2005
5-7 Headset Volume
9
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / menuetree.fm / 13.10.2008
Menu tree
6
6-1
6-2
6-3
6-4
6-7
Settings
Date/Time
Direct Diall. Keys
Language
Jumbo Font
Handset
6-8 Base
Version 4, 16.09.2005
7
Voice Mail
7-1 Set Key 1
10
6-7-1
6-7-2
6-7-3
6-7-4
Screen Saver
Auto Answer
Register Handset
Reset Handset
6-8-2 System PIN
6-8-3 Base Reset
6-8-4 Listening in
7-1-1 Network Mailbox
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / telephony.fm / 13.10.2008
Making calls
Making calls
Making an external call/ending
a call
External calls are calls using the public telephone network.
~ (Enter phone number) ¢ c.
The number is dialled. (You can also first
press the c key [ringtone] and then enter
the number.) The earpiece volume can be
adjusted during the call with the t key.
End a call/cancel dialling:
Press the end call key a or place the
handset in the base station or charging
cradle.
Answering a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree
key d.
You can answer the call by:
¤ Pressing the talk key c.
¤ Pressing the handsfree key d.
¤ Press the display key §Accept§.
If the handset is in the base and the Auto
Answer function is activated (page 23), the
handset will answer a call automatically
when you lift it out of the base.
If the ringtone is intrusive, press §Silence§.
The ringtone is switched off for this call.
You can answer the call so long as it is displayed on the screen.
Version 4, 16.09.2005
Calling line identification
– CLI (calling line identification): the
caller's number is transmitted
– CLIP (calling line identification presentation): the caller's number is displayed
u You have arranged CLIP with your network provider.
u The caller has arranged CLI with the
network provider.
Displaying the caller's number
The phone number of the caller is shown
on the display or also the name of the
caller if the name has been stored in the
directory.
Requirements:
1. You have arranged with your network
provider to have the phone number of
the caller (CLIP) shown on your display.
2. The caller has arranged with the network provider to allow his/her phone
number to be identified (CLI).
The screen displays Extern. Call if you
have not arranged for calling line identification presentation, Withheld if calling line
identification has been withheld by the
caller or Unavailable if it has not been
arranged with the network provider.
Handsfree operation
You can make calls immediately in handsfree mode (the d key lights up permanently) after entering the phone number
by pressing the handsfree key d. Toggle between earpiece and handsfree
mode during a call by pressing the d
key. The volume can be adjusted during
handsfree operation with the t key.
When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
u Your network provider supports CLIP,
CLI:
11
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / telephony.fm / 13.10.2008
Operating the handset
Operating the handset
In lists and menus
t/s
Scroll up/down line by line.
In an input field
Switching the handset on/off
t/s
a
Press and hold the end
call key.
You will hear the confirmation tone.
Move the cursor left or right.
During an external call
s
t
Activating/deactivating the
keypad lock
Open the directory.
Adjust loudspeaker volume for
earpiece and handsfree mode.
Display keys
#
Press and hold the hash key.
You will hear the confirmation tone. The
icon Ø appears in the display when the
keypad lock is activated.
Note:
The handset displays an advisory message if
you press a key by accident while the keypad
lock is on. To deactivate the keypad lock, press
the hash key # and hold.
The current display functions are shown in
the bottom display line in reverse video.
The functions of the display keys change
depending on the particular operating
situation.
Example:
§Redial§
§§Menu §
1
2
Control key on the handset
1 Current display key functions
2 Display keys
1
1 Control key
The side of the control key you have to
press in the given operating situation is
shown in black (top, bottom) in this user
guide. Example: t for "press the top of
the control key".
The control key has a number of different
functions:
When the handset is in idle status
s
Version 4, 16.09.2005
t
12
Open the directory.
Adjust the ringer melody volume of the handset (page 24).
The most important display symbols are:
§Back§
Go back one menu level or
cancel operation.
§Menu§
Open the main menu or a context-dependent menu.
§OK§
Confirm highlighted selection.
§Delete§
Delete key: backspace delete
one character at a time.
§Redial§
Open the last number redial
list.
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / telephony.fm / 13.10.2008
Using the directory, direct dialling keys and lists
Returning to idle status
Correcting incorrect entries
You want to return to idle status from anywhere in the menu: Press the end call
key a and hold.
If you do not press any key, the display will
automatically revert to idle status after 2
minutes.
Changes that you have not confirmed/
stored by pressing §OK§ will be rejected.
For an example of the display in idle status: page 1.
u Navigate to the wrong input with the
Menu guidance
Your telephone's functions are accessed
using a menu that has a number of levels.
Main menu (first menu level)
¤ To open the main menu, press §Menu§
with the handset in idle status.
Accessing a function
¤ Scroll to the function with the control
key q and press §OK§ or enter the digit
that appears before the function in the
menu overview (page 9).
The corresponding submenu (the next
menu level) is opened.
Submenus
Version 4, 16.09.2005
The functions in the submenus are displayed as lists.
To access a function:
¤ Scroll to the function with the control
key q and press §OK§ or enter the digit
combination that appears before the
function in the menu overview
(page 9).
Briefly pressing the end call key a returns
you to the previous menu level / cancels
the operation.
control key if û is displayed.
u Press §Delete§ to delete the character to
the left of the cursor.
u Insert new character to the left of the
cursor.
u When entering the time and date etc.,
edit the flashing character.
You will find explanations for the symbols
and typographical conventions used in
this user guide in the appendix, page 27.
Using the directory, direct
dialling keys and lists
A directory, last number redial list, SMS list
as well as calls list are available.
You can save up to 100 entries in the directory.
You can create a personalised directory for
your own individual handset. However,
you can send the list or individual entries
to other handsets (page 14).
Directory
You can store numbers and the associated
names in the directory. With the handset
in idle status, open the directory by pressing the s key.
Length of an entry
Number:
Name:
max. 22 digits
max. 16 characters
13
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / telephony.fm / 13.10.2008
Using the directory, direct dialling keys and lists
Storing the first number in the
directory
s ¢ Dir empty New entry? ¢ §OK§
¢ ~ (Enter number) ¢ §OK§
¢ ~ (Enter name) ¢ §OK§
Storing a number in the directory
s ¢ §Menu§ ¢ New Entry ¢ §OK§
¢ ~ (Enter number) ¢ §OK§
¢ ~ (Enter name) ¢ §OK§
Sending the directory to another
handset
Selecting a directory entry
Requirements:
s
Open the directory.
You have the following options:
u Use q to scroll to the entry until the
required name is selected.
u Enter the first character of the name, or
scroll to the entry with q.
u The sending and receiving handsets
Dialling with the directory
s ¢ q (Select entry; page 14) ¢ c
Managing directory entries
You have selected an entry (page 14).
Editing entries
¢ Edit Entry ¢ §OK§
¢ ~ (Change number if required)
¢ §OK§
¢ ~ (Change name if required)
¢ §OK§
§Menu§
Using other functions
Version 4, 16.09.2005
Send Entry
Send a single entry to another handset
(page 14).
Delete List
Delete all directory entries.
Send List
Send the complete list to another handset (page 14).
The following functions can be selected
with §Menu§ ¢ q:
Use Number
Edit or add to a stored number. Then
dial or use other functions with §Menu§.
Show Number
Show number.
Delete Entry
Delete selected entry.
14
must both be registered on the same
base station.
u The other handset and base station can
send and receive directory entries.
s ¢ q (Select entry; page 14)
¢ §Menu§ ¢ Send Entry / Send List
¢ §OK§ ¢ ~ (Enter the internal
number of the receiving handset)
¢ §OK§
A successful transfer is confirmed by a
message and confirmation tone on the
receiving handset.
Adding a displayed number to
the directory
You can copy any numbers to the directory
that appear in a list, for example the calls
list or the last number redial list.
A number is displayed.
§Menu§ ¢ Copy to Directory ¢ §OK§
¤ Complete the entry (page 14).
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / telephony.fm / 13.10.2008
Using the directory, direct dialling keys and lists
Direct diallingkeys
You can store particularly important
phone numbers, for example emergency
numbers, under the 4 direct dialling
keys.
You dial the stored direct dialling number
by pressing the corresponding direct dialling key and the talk key c.
Refer to the font table (page 31) for information on how to enter the text correctly.
Storing/changing direct diallingkeys
You can assign external phone numbers
and the internal call function to the direct
dialling keys.
§Menu§ ¢ Settings ¢ §OK§ ¢ Direct Diall.
Keys ¢ §OK§ ¢ I: <no entry> ¢ q
Select direct dialling key (I to IV)
Entering/changing an entry
You have selected a direct dialling key.
§Menu§ ¢ Edit Entry ¢ §OK§
~
Enter or edit the number if
required and press §OK§.
~
Enter or edit the name if
required and press §OK§.
Using other functions
The following functions can be selected
with §Menu§ ¢ q:
Delete Entry
Delete selected entry.
Call. Home Internal
Pressing this key results in all registered
handsets being called.
Use Number
Edit or add to a stored number. Then
dial or use other functions with §Menu§.
Version 4, 16.09.2005
Note:
When a phone number is displayed on the
screen, you can programme this number onto
an unassigned direct dialling key by pressing
and holding the relevant direct dialling key.
If SOS mode has already been activated
and is then reactivated, Change no./ name?
appears in the display. Respond to the
request
u with §Yes§ to continue the procedure
u with §No§ to continue with Label with
Internal Call
Last number redial list
The last number redial list contains the ten
numbers last dialled with the handset
(max. 22 digits). If one of the numbers is
in the directory, then the corresponding
name will be displayed.
Dialling from the last number redial list
§Redial§
q
c
Press the display key.
Select an entry.
Press the talk key. The number
is dialled.
Managing entries in the last number
redial list
Press the display key.
Select an entry.
§Menu§
Press the display key.
The following functions can be selected
with q:
Use Number (as in the directory, page 14)
Copy to Directory (as in the directory,
page 14)
Delete Entry (as in the directory, page 14)
Delete List (as in the directory, page 14)
§Redial§
q
Opening the message list with
the display key
You can use the display key ‘ to
open the SMS list, the network mailbox (if
your network provider supports this function and the network mailbox is set up for
speed dialling, page 21) and the calls list.
15
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / telephony.fm / 13.10.2008
Using the directory, direct dialling keys and lists
An advisory tone sounds as soon as a new
entry appears in a list. A message appears
in the display. If you press the display
key ‘, you will see all the lists that
contain new messages. If only one list
contains new messages, this list will be
opened automatically. Press any key and
the message advising of new messages is
no longer shown on the display.
The display key ‘ is faded out when
the list is exited. Access to the network
mailbox can be initiated with key 1 on
the handset (if the handset is set up for
speed dialling), while the SMS list and the
calls list can be opened via the menu (see
page 9). The display key ‘ is available again after a new entry in one of the
lists.
Note:
If calls are stored in the network mailbox you
will receive a message if the appropriate settings have been made (see the network mailbox instructions of your network provider).
List entry
Example of a list entry:
New Call
1234567890
§Back§ U §Menu
u Status of entry
New Call: new missed call.
Old Call: entry already read.
Only for list type "all calls":
Call Recv.: Call was answered
u Number or name of caller
You can add the number of the caller to
the directory (page 14).
You can delete the current entry with
§Menu§ ¢ Delete Entry.
You can show the date and time of the call
(if set, page 8) with §Menu§ ¢ Date and Time.
Calls list
Dialling from the calls list
Requirement: CLIP (page 11)
The calls list contains
u missed calls
Depending on the list type selected, all
numbers of the last 20 missed calls are
stored.
The list is displayed as follows:
Open the calls list (see page 16).
q
Select an entry.
Press the talk key. The number
c
is dialled.
Calls List: 01+02
Number of new messages + number of old,
read messages.
Selecting the list type for the calls list
¢ L N O 1 Q ¢ Enter
digits: 1 = missed calls ¢ §OK§
§Menu§
The entries in the calls list are preserved if
you change the list type.
Version 4, 16.09.2005
The last call received is displayed as the
first entry in the calls list.
Opening the calls list
‘
q
16
¢ Calls List: 01+02 ¢ §OK§
Select entry.
Deleting the calls list
Caution! All old and new entries will be
deleted.
§Menu§ ¢ Calls List: ¢ §OK§ ¢ §Menu§
¢ Delete List ¢ §OK§
a
Press andold (idle status).
¤
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / sms_neutral.fm / 13.10.2008
SMS (text messages)
SMS (text messages)
Your unit is supplied ready for you to send
text messages immediately.
Your text message is sent through the SMS
centre that is active (page 19). Only one
SMS centre can be active at any one time.
Draft message list
In the draft message list, you can save,
edit later and send an SMS.
Saving an SMS in the draft message list
You are writing an SMS (page 17).
§Menu§ ¢ Save Text ¢ §OK§
Please remember:
Opening the draft message list
u If your phone is connected to a PABX,
§Menu§
please read page 19.
u Each incoming SMS is signalled by a
single ring (ringtone as for external
calls). If you accept such a call, the SMS
will be lost. To prevent this, suppress
the first ringtone for all external calls
(page 24).
¢ SMS ¢ §OK§ ¢ Outgoing ¢ §OK§
The first entry in the list is displayed, e.g.:.
Saved
01/01
§Back§ U §Menu
01/01: Current number/total number of
SMS text messages
Reading or deleting SMS messages
Writing/sending an SMS
An SMS may contain up to 160 characters.
Writing/sending an SMS
¢ SMS ¢ §OK§ ¢ Write Message
¢ §OK§
§Menu§
~
Write an SMS. For how to enter
the text, see page 31.
§Menu§ ¢ Send Text
Select and press §OK§.
s/~
Enter the number with prefix
(including your local area
code) from the directory or key
it in manually, and press §OK§.
For SMS to an SMS mailbox:
put the mailbox ID at the end
of the number.
The SMS is sent.
¤ Open the draft message list.
q
Select SMS.
§Menu§
Press the display key.
You have the following options:
Read SMS
Select and press §OK§ to read
the SMS message. Scroll in the
SMS using q.
Delete Entry
Select and press §OK§ to delete
the SMS message.
Date/Time
Select and press §OK§ to show
when the SMS message was
written.
Delete List
Select and press §OK§ to delete
all SMS messages in the draft
message list.
Note:
Version 4, 16.09.2005
If you are interrupted by an external call while
writing an SMS, the text is automatically saved
in the draft message list.
17
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / sms_neutral.fm / 13.10.2008
SMS (text messages)
Writing/editing an SMS
You are reading an SMS in the draft message list.
§Menu§
Press the display key.
You have the following options:
Write Message
Write and then send a new SMS
(page 17) or save.
Use Text
Edit the text of the saved SMS and then
send (page 17).
Receiving an SMS
All received text messages are saved in the
incoming message list. Since an SMS
remains in the list even after it has been
read, you should regularly delete SMS
messages from the list.
The display tells you if the SMS memory is
full.
¤ Deleting text messages you no longer
require (page 18).
Incoming list
The incoming message list contains:
u All received SMS messages, starting
with the latest.
u SMS messages that could not be sent
on account of an error.
New text messages are signalled on all
handsets by a message in the display and
an advisory tone.
Opening the incoming message list with
the display key
Press ‘
The incoming message list is displayed as
follows (example):
Version 4, 16.09.2005
SMS:
01+05
01+05: The number of new + the number
of old, read messages
18
An entry in the list is displayed as follows
for example:
New
01/02
1234567890
§Back§ U §Menu
01/02: Current Number of the SMS currently in
the display / total number of new SMS
messages
Opening the incoming message list via the
SMS menu
¢ SMS ¢ §OK§ ¢ Incoming 01+05
¢ §OK§
§Menu§
Reading or deleting SMS messages
¤ Open the incoming message list.
q
Select SMS.
Press the display key.
You have the following options:
Read SMS
Select and press §OK§ to read
the SMS message. Scroll
through the SMS messages
using q. A new SMS message
which you have read acquires
the status Old.
Delete Entry
Select and press §OK§ to delete
the SMS message.
§Menu§
Copy to Directory
Select and press §OK§ to copy
the sender's number to the
directory.
Date and Time
Select and press §OK§ to show
when the SMS message was
received.
Delete List
Select and press §OK§ to delete
all SMS messages in the
incoming message list.
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / sms_neutral.fm / 13.10.2008
SMS (text messages)
Replying to or forwarding
text messages
SMS to a PABX
You are reading an SMS (page 18).
§Menu§
Press the display key.
You have the following options:
Reply
Write and send a reply SMS directly
(page 17).
Use Text
Edit the text in the SMS and then send
it (page 17).
Send Text
Forward the text of an SMS to another
recipient (page 17).
ing line identification presentation
(page 11) is forwarded to the extension
of the PABX (CLIP). The CLIP of the
phone number for the SMS centre is
evaluated in your Twist.
u Depending on your PABX, you may
have to add the access code (external
line prefix) before the number of the
SMS centre.
Setting up the SMS centre
Entering/changing SMS centres
¤ Before changing or entering a new
service number, make sure to find out
about service offers and special features of your service provider.
§Menu§ ¢ SMS ¢ §OK§ ¢ Settings ¢ §OK§
¢ Service Centres ¢ §OK§
q
Select the SMS centre (e.g.
Service Centre 1) and press §OK§.
You have the following options:
Activ. send Centre
If the SMS messages are to be sent
through this SMS centre, press §OK§ to
activate the SMS centre (‰ = on). If a
different SMS centre was active previously, then this will be deactivated.
Centre No.
Enter the number of the SMS centre
and press §OK§.
u You can only receive an SMS when call-
Activating/deactivating the SMS
function
When you switch off you cannot send or
receive any further SMS text messages
with your phone.
Settings you have made for sending and
receiving text messages (the numbers of
SMS centres) and any entries in the incoming message and draft message lists will
be retained even after the function is
deactivated.
§Menu§ ¢ L N O 2 L ¢ Enter
digits: Q= Deactivate the SMS
function; 1 = Activate the SMS
function (default status) ¢ §OK§
Sending an SMS through another
SMS centre
Version 4, 16.09.2005
¤ Activate the SMS centre (2 or 3) as the
¤
active send centre (page 19).
Send the SMS.
19
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / sms_neutral.fm / 13.10.2008
SMS (text messages)
SMS troubleshooting
Error codes when sending
If an SMS cannot be sent for a longer
period of time, it is moved to the incoming
message list and given the status Err. XX.
E0 Calling line identification permanently
withheld (CLIR) or calling line identification presentation not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed, see selfhelp.
Self-help with errors
The following table lists error situations
and possible causes and provides notes on
troubleshooting.
You cannot send messages.
1. Text message transmission has been interrupted (e.g. by a call).
Re-send the text message.
¥
2. No number or an invalid number is entered
for the SMS centre activated as the send
centre.
Enter phone number (page 19).
¥
You cannot access the SMS functions on your
handset.
Another handset that is registered at the
same base station is currently using the
SMS functions.
Wait until there is no other handset
using the SMS functions.
Version 4, 16.09.2005
¥
20
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / T-NetBox_SAG-registration.fm / 13.10.2008
Using the network mailbox
Using the network mailbox
The network mailbox is your network provider's answering machine. You cannot
use the network mailbox unless you have
applied to your network provider.
Using the network mailbox for
setting speed dialling
With speed dialling, you can direct dial the
network mailbox.
The integrated answering machine is preconfigured for speed dialling. You only
have to enter the number.
Configuring the network mailbox for speed
dialling and entering the network mailbox
number
¢ Voice Mail ¢ §OK§ ¢ Set Key 1
¢ §OK§ ¢ Network Mailbox ¢ §OK§
(‰ = on) ¢ Enter the number of the
network mailbox ¢ §OK§
§Menu§
This setting is now valid for all registered
handsets.
Calling the network mailbox
Version 4, 16.09.2005
1
Press and hold. This connects
you directly to the network
mailbox.
Using several handsets
Registering handsets
You can register up to four handsets on
your base station.
Automatic registration of handsets on
Twist 698, see page 7.
Manual registration of handsets on
Twist 698
You must activate manual registration of
the handset on both the handset and the
base station.
After it has registered, the handset returns
to idle status. If several handsets are registered on the base, the internal number is
shown in the display after registration,
e.g. 2.
The registration process is cancelled after
60 seconds. If the handset has not registered within this time, repeat the process.
On the handset
¢ Settings ¢ §OK§ ¢ Handset ¢ §OK§
¢ Register Handset ¢ §OK§ ¢
Menu§
Enter system PIN of base station
(default status: 0000) ¢ §OK§
On the base station
Viewing the network mailbox
message
÷
When a message arrives for you, you get a
call from the network mailbox. If you have
requested Calling Line Identification, the
display shows the network mailbox
number. If you accept the call, the new
messages are played back. If you do not
accept the call, the network mailbox
number will be stored in the list of missed
calls (page 16).
Registering other handsets
Press and hold the registration/paging key on the base
station (page 1) (min. 1 sec.).
You can register other handsets and handsets for other devices with GAP functionality as follows.
On the handset: Start to register the
handset as described in its user guide.
On the base station: Press and hold the
registration/paging key ÷ on the base
station (page 1) (min. 1 sec.).
21
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / T-NetBox_SAG-registration.fm / 13.10.2008
Using several handsets
Locating a handset ("Paging")
You can locate your handset using the
base station.
¤ Press the registration/paging key ÷ on
the base station (page 1) briefly.
¤ All handsets will ring at the same time
("paging"), even if the ring tones are
switched off.
Ending paging
Briefly press the registration/paging key
÷ on the base station (page 1) or press
the talk key c on the handset.
Making internal calls
Internal calls are free calls between handsets that you have registered on the same
base station. In order to be able to initiate
an internal call, one of the speed dialling
keys must be programmed for internal
calls (see page 15).
Calling other handsets
Press the relevant speed dialling key
(é ... ì) which is programmed for
internal calls when the handset is in idle
mode. Acknowledge the query Call home
internal? with Yes. You will see the message Calling all handsets on the display.
Note:
If no user connects, the handset switches to
idle mode after 3 minutes.
Answering an internal call
Your phone rings and the internal number
of the caller is displayed on the screen, for
example 2.
Press the talk or handsfree key c/d on
the handset to answer the call.
Ending a call
Version 4, 16.09.2005
Press the end call key a on the handset .
22
Transferring a call to another handset/
internal consultation
You are calling an external subscriber.
¤ Initiate an internal call, see “Calling
other handsets” auf Seite 22. (You can
press the display key §Back§ during the
internal call and are connected again to
the external subscriber.)
When an internal party answers:
u To transfer to the internal party, press
the end call key a on the handset .
u The internal party must end the call to
terminate the consultation. You are
reconnected with the external caller.
Note:
You can also press the end call key a before
connecting the internal caller. If the internal
party does not answer, or their phone is in use,
the call will automatically return to you.
Accepting a waiting call
If you get an external call while conducting an internal call, you will hear the call
waiting tone (short tone). The caller's
number will appear in the display if calling
line identification is enabled.
¤ Press the end call key a on the handset to end the internal call.
¤ Press the talk key con the handset to
answer the external call.
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / T-NetBox_SAG-registration.fm / 13.10.2008
Handset settings
Listening in to an external call
You want to listen in to an existing external call.
Requirement: The Listening in function
must be activated.
Activating/deactivating the function:
¢ Settings ¢ §OK§ ¢ Base ¢ §OK§
¢ Listening in ¢ §OK§ (‰ = on)
Menu§
Listen in to call:
Press the talk key con the handset All
participants hear a signal tone. Conf. Call is
shown on the handset display.
Ending listening in:
Press the end call key a on the handset so
that all participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has 'listened in' remains connected to the external caller.
Handset settings
Your handset comes with default settings.
You can change the individual settings.
Changing the display language
You can view the display texts in different
languages.
§Menu§ ¢ Settings ¢ §OK§ ¢ Language
¢ §OK§ ¢ q (Choose language)
¢ §OK§
The current language is indicated by ‰.
If you accidentally choose a language you
do not understand:
§Menu§ ¢ L I ¢ q
(Choose language) ¢ §OK§
Screensaver
When this function is activated, the time is
shown in digital in idle mode, filling the
entire display.
§Menu§ ¢ Settings ¢ §OK§ ¢ Handset ¢ §OK§
¢ Screen Saver ¢ §OK§ (‰ = on)
Auto answer
Version 4, 16.09.2005
When this function is activated, when a
call arrives you can simply lift the handset
out of the base without having to press
the talk key c.
§Menu§ ¢ Settings ¢ §OK§ ¢ Handset ¢ §OK§
¢ Auto Answer ¢ §OK§ (‰ = on)
23
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / T-NetBox_SAG-registration.fm / 13.10.2008
Handset settings
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking and the earpiece volume to five different levels (1–5; e.g.
volume 2 = ˆ).
§Menu§ ¢ Audio Settings ¢ §OK§ ¢ Handset
Volume / Handsfree Volume ¢ §OK§
q
Adjust the volume and
press §OK§.
Adjust the volume during a call:
t
Press the control key.
q
Adjust the volume and
press §OK§.
Set different ringer melodies for external
calls, internal calls and the alarm clock.
§§Menu§ ¢ Audio Settings ¢ §OK§ ¢ Ringer
Melody ¢ §OK§ ¢ External Calls /
Internal Calls / Alarm Clock ¢ §OK§
¢ q (Select melody)
¢ §OK§ (‰ = on)
Activating/deactivation
suppression of the first ringtone
Changing ringtones
The phone identifies an incoming SMS
from the first network signal.
§Menu§ ¢ L N O 2 5
¢ Enter digits: Q = make first
ringtone audible; 1 = suppress first
u Volume:
Please remember:
Five volume levels
(1-5; e.g. volume 2 = ˆ) and "off"
(volume 0 = Ú ‰ ).
u Melody:
List of pre-loaded ringer melodies. The
first three melodies are the "classical"
ring tones.
You can also set different melodies for the
following functions:
u External Calls: For external calls
u Internal Calls: For internal calls
u Alarm Clock: For the alarm clock
Setting ringer volume
The ringer volume is the same for all types
of signalling.
§Menu§ ¢ Audio Settings ¢ §OK§ ¢ Ringer
Volume ¢ §OK§ ¢ q (Adjust volume)
¢ §OK§
Or in idle status:
t Press briefly ¢ q (Adjust volume)
Version 4, 16.09.2005
Setting ringer melody
¢ §OK§
24
ringtone
¢ §OK§
If first ringtone muting is deactivated,
then every incoming SMS will be signalled
by a ringtone. If you take this type of "call"
at the first ringtone, you will lose the SMS.
Advisory tones
Your handset uses ‘advisory tones’ to tell
you about different activities and statuses.
The following tones can be activated and
deactivated independently of each other:
u Advisory tones:
– Key click: Each key press is
acknowledged.
– Confirmation tone (rising tone
sequence): at the end of an entry/
setting, when the handset is placed
in the base station and on arrival of
an SMS or a new entry in the calls
list.
– Error tone (descending tone
sequence): when you make an
incorrect entry.
– Menu end tone: when scrolling at
the end of a menu.
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / T-NetBox_SAG-registration.fm / 13.10.2008
Base station settings
u Battery warning tone: The battery
requires charging.
You cannot deactivate the confirmation
tone for placing the handset in the
base station.
Activating/deactivating advisory tones
¢ Audio Settings ¢ §OK§ ¢ Advisory
Tones ¢ §OK§ (‰ = on)
§Menu§
Setting the battery warning tone
¢ Audio Settings ¢ §OK§ ¢ Battery
Low ¢ §OK§ ¢ On / Off / During Call
¢ §OK§ (‰ = on)
The battery warning tone is activated or
deactivated or sounds during a call.
§§Menu§
Using the handset as an
alarm clock
Activating/deactivating the alarm clock
Requirement:
The time is set (see page 8).
§Menu§ ¢ Alarm Clock ¢ OK§ ¢ Activation
¢ §OK§ (‰ = on)
After you activate the alarm clock, the
menu for setting the wake up time opens
automatically.
If the alarm clock is set, the wake up time
appears with the l icon in the display.
Setting the wake up time
¢ Alarm Clock ¢ §OK§ ¢ Wakeup
¢ §OK§ ¢ Enter wake up timen
¢ §OK§
§Menu§
time
When the alarm clock rings…
Version 4, 16.09.2005
Press the display key §Off§ or any key to
deactivate the alarm clock for 24 hours.
If you do not press any key, the alarm clock
switches off after one minute.
Restoring the handset default
settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list, or
SMS lists or the handset's registration on
the base station.
§Menu§ ¢ Settings ¢ §OK§ ¢ Handset ¢ §OK§
¢ Reset Handset ¢ §OK§
Cancel the reset with a.
Base station settings
The base station settings are carried out
using a registered handset.
Changing the system PIN
You have to enter the system PIN when registering a handset on the base station.
You can change the base's 4-digit default
system PIN ("0000") to a 4-digit PIN known
only to yourself.
§Menu§ ¢ Settings ¢ §OK§ ¢ Base ¢ §OK§
¢ System PIN ¢ §OK§ ¢ PIN: ¢ §OK§
¢ New PIN: ¢ §OK§
Should you forget the system PIN, you can
reset the base station to the original
code 0000:
Remove the mains cable from the base
station. Press and hold down the registration/paging key (page 1) on the base station while you reconnect the mains cable
to the base station. Release the key after a
short while.
The base station is now reset and the system PIN is set to 0000.
25
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / T-NetBox_SAG-registration.fm / 13.10.2008
Operating the base station on the PABX
Restoring the base station to
factory settings
When the settings are restored all handsets are de-registered. Each individual setting is restored. Only the date and time are
retained.
§Menu§ ¢ Settings ¢ §OK§ ¢ Base ¢ §OK§
¢ Base Reset ¢ §OK§
Operating the base station
on the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide for your PABX.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Changing the dialling mode
§Menu§ ¢ L N O 1 1 ¢ Enter digits for dialling mode: Q = Dual-tone multifrequency dialling (DTMF); 1 = Pulse
dialling (PD) ¢§OK§
Switching temporarily to dual-tone
multifrequency dialling (DTMF)
Version 4, 16.09.2005
If your PABX is still using pulse dialling
(PD) but tone dialling is required for a connection (e.g. to play back the network
mailbox), you have to switch temporarily
to tone dialling.
Requirement: You are currently conducting a call or have already dialled an external number.
Press the asterisk key P. Tone dialling is
activated for this connection only.
26
Setting the flash time
¢LNO12
¢ Enter digits for flash time:
§Menu§
Q = 80 ms; 1 = 100 ms;
2 = 120 ms; I = 180 ms;
4 = 250 ms; 5 = 300 ms;
L = 600 ms; M = 800 ms ¢ §OK§
Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key c
and sending the phone number.
§Menu§ ¢ L N O 1 O ¢ Enter the
digits for the current pause length:
1 = 1 sec.; 2 = 3 sec.; I = 7 sec.
¢ §OK§.
Changing the pause after the recall key
¢ L N O 1 4 ¢ Enter the
digits for the current pause length:
1 = 800 ms; 2 = 1600 ms;
I = 3200 ms ¢ §OK§
§Menu§
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / appendix.fm / 13.10.2008
Appendix
Appendix
Symbols and typographical
conventions used
This section explains the meaning of certain symbols and typographical conventions that are used in this user guide.
~
Enter digits or letters.
§Menu§
The display functions currently
in the bottom display line are
shown in reverse video. Press
the relevant display key to
launch the function.
q
Press the top or bottom of the
control key, e.g. when
scrolling.
c / Q / P etc.
Press the illustrated key on the
handset.
External Calls / Internal Calls (example)
Select one of the menu functions (External Calls or Internal
Calls) from the list and
press §OK§.
§§Menu§ ¢ Audio Settings ¢ §OK§ ¢ Ringer
Melody (example) ¢ §OK§
Press §Menu§. Select Audio Settings using q and press §OK§.
Select Ringer Melody using q
and press §OK§.
Care
¤ Wipe the base station and handset with
a damp cloth (do not use solvent) or an
antistatic cloth.
Never use a dry cloth. This can cause
static.
Contact with liquid !
If the handset has come into contact with
liquid:
¤ Switch the handset off and remove
the batteries immediately.
¤ Allow the liquid to drain from the handset.
¤ Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place for at least 72 hours (not
in a microwave, oven, etc.).
¤ Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will generally be able to use it again.
Questions and answers
The table below contains a list of common
problems and possible solutions.
The display is blank.
1. The handset is not switched on.
Press and hold the end call key a.
¥
2. The battery is flat.
Charge the battery or replace it
(page 6).
¥
The handset does not respond to a key
press.
The keypad lock is activated.
Press and hold the hash key # (page 12).
¥
Base is flashing in the display.
1. The handset is outside the range of the
base station.
Move the handset closer to the base.
¥
2. The base station is not switched on.
Check the base station mains adapter
(page 6).
¥
Version 4, 16.09.2005
Handset does not ring.
The ringtone is switched off.
Activate the ringtone (page 24).
¥
27
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / appendix.fm / 13.10.2008
Appendix
You cannot hear a ringtone/dialling tone.
Base station's phone cord has been replaced.
When purchasing a new cord, ensure that it
has the correct pin connections (page 6).
¥
The incoming call number is not displayed
although CLIP (page 11) is set.
Phone number identification is not enabled.
The caller should ask his/her network
provider to enable calling line
identification (CLI).
¥
You hear an error tone when keying
an input
(a descending sequence of tones).
Action has failed/invalid input.
Repeat the operation.
Watch the display and refer to the operating instructions if necessary.
¥
Programming of SOS mode did not work.
The feature is only available behind extension
systems that do not require an "R" or a "P" for
obtaining an outside line.
Declaration of Conformity
This device is intended for the Belgacom
analogue phone lines in Belgium.
Country-specific conditions have been
taken into account.
We, Gigaset Communications GmbH,
declare, that the Twist 698 is manufactured according to our Full Quality Assurance System certified by CETECOM ICT
Services GmbH in compliance with ANNEX
V of the R&TTE-Directive 1999/5/EC.
The presumption of conformity with the
essential requirements regarding Council
Directive 1999/5/EC is ensured according
to
Art. 3.1 a) Safety:
EN 60950 (equivalent to 73/23/EC)
Art. 3.1 a) EMF/SAR:
1999/519/EC (EU-Council Recommendation)
EN 50360
Art. 3.1 a) Acoustic Shock:
TBR 10 ( Portable Part )
Art. 3.1 b) EMC:
EN 301 489-1 / EN 301 489-6
(equivalent to 89/336/EC)
Art. 3.2 Radio:
EN 301 406
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address:
http://www.gigaset.com/docs
Version 4, 16.09.2005
Senior Approvals Manage
28
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / appendix.fm / 13.10.2008
Appendix
Environment
General specifications
u The equipment that you bought has
DECT standard
is supported
GAP standard
is supported
Range
up to 300 m outdoors,
up to 50 m indoors
Base station
power supply
230 V ~/50 Hz
Environmental
conditions for
operation
+5 °C to +45 °C;
20 % to 75 % relative
humidity
u
u
u
u
required the extraction and use of natural resources for its production. It may
content hazardous substances for the
health and the environment.
In order to avoid the dissemination of
those substances in our environment
and to diminish the pressure on the
natural resources, we encourage you to
use the appropriate take-back systems.
Those systems will reuse or recycle
most of the materials of your end life
equipment in a sound way.
The crossed-bin symbol invites you to
use those systems.
If you need more information on the
collection, reuse and recycling systems,
please contact your local or regional
waste administration.
You can also contact us for more information on the environmental performances of our products.
Technical data
Handset operating times/charging
times
The following information relates to batteries with a capacity of 650mAh.
Standby time
approx 165hours (7days)
Calling time
approx. 18 hours
Charging time
approx. 13 hours
The operating and charging times apply
only when using the recommended batteries.
Version 4, 16.09.2005
Base station power consumption
In standby mode: approx. 2W
During a call: approx. 3W
29
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / appendix.fm / 13.10.2008
Appendix
Guarantee terms
@nZkZgm^^m^kfl
Ma^ >jnbif^gm rhn aZo^ [hn`am aZl [^^g \Zk^_neer l^e^\m^] [r ;^e`Z\hf Zg]
bl\ho^k^][rZmph&r^ZkpZkkZgmrhgliZk^iZkmlZg]eZ[hkbgma^^o^gmh_Zgr
fZm^kbZehkfZgn_Z\mnkbg`]^_^\m%nge^llhma^kpbl^li^\b_b^]'Ma^pZkkZgmrlaZee
[^oZeb]_khfma^]Zm^hgpab\ama^^jnbif^gmbl\hee^\m^]hk]^ebo^k^]'
B_ rhn aZo^ Zgr ikh[e^fl pbma ma^ ^jnbif^gm% rhn lahne] mZd^ bm mh Z
M^e^[hnmbjn^hkmhhg^h_hnkZnmahkbs^]Z`^gml%bgbml^gmbk^mrZg]bgbmlhkb`bgZe
iZ\dZ`bg`% hk bg iZ\dZ`bg` ikhob]bg` ma^ lZf^ ]^`k^^ h_ ikhm^\mbhg% mh`^ma^k
pbma ma^ hkb`bgZe k^\^bim'Ma^ Z]]k^ll^l _hk hnkM^e^[hnmbjn^l Zg] Znmahkbs^]
Z`^gmlZk^`bo^gbgma^Bg_hkfZmbhgL^\mbhgh_ma^Pabm^IZ`^l'
Rhnk^jnbif^gmpbee[^k^iZbk^]hkk^ieZ\^]_k^^h_\aZk`^%hgik^l^gmZmbhgh_ma^
k^\^bim%bgma^^o^gmh_ZgrfZm^kbZehkfZgn_Z\mnkbg`]^_^\m'
;^e`Z\hfZehg^laZee]^m^kfbg^paZmk^iZbklZg](hkk^ieZ\^f^gmlZk^g^\^llZkr'
Ma^ pZkkZgmr hg ma^ k^iZbk^] hk k^ieZ\^] ^jnbif^gm laZee ^g] hg ma^ ]Zm^ hg
pab\ama^hkb`bgZepZkkZgmrhgma^ink\aZl^]^jnbif^gm^qibk^l%[nmlaZeeghm
[^e^llmaZg,fhgmal'
Ma^pZkkZgmrlaZeeghm\ho^k3
&]ZfZ`^h_Zgrdbg]maZm]h^lghmik^]Zm^ma^lZe^4
&Zgr]ZfZ`^%_Znemlhk]^_^\mlZmmkb[nmZ[e^mhma^<nlmhf^khkmh\Znl^lngk^&
eZm^]mhma^>jnbif^gm3eb`amgbg`%ihp^klnk`^l%anfb]bmr%Z\\b]^gmZe]ZfZ`^%
bfikhi^knl^hkihhkfZbgm^gZg\^%_Zbenk^mh\hfierpbmama^bglmkn\mbhglbg
ma^nl^kfZgnZe%Zg]_hk\^fZc^nk^4
&ma^ k^iZbk hk k^ieZ\^f^gm h_ fhoZ[e^ iZkml !\hk]l% pbk^l% ien`l% Z^kbZel% ^m\'"%
\hglnfZ[e^l!\^eel%[Zmm^kb^l%iZi^k%bgd%^m\'"g^^]bg`k^`neZkk^ieZ\^f^gmZg]
ma^lniierh_\e^Zgbg`ikh]n\ml'
Ma^pZkkZgmrlaZeeghmZiier3
&mh Zgr \aZg`^l hk k^iZbkl mh ma^ m^kfbgZe >jnbif^gm ng]^kmZd^g [r ma^
<nlmhf^k abfl^e_(a^kl^e_ hk makhn`a ma^ l^kob\^l h_ i^klhgl ghm ]^lb`gZm^]
[r;^e`Z\hf4
&b_ ma^<nlmhf^k k^fho^l hk mZfi^kl pbma ma^ fZgn_Z\mnk^kÃl l^kbZe gnf[^kl
Zg](hk[kZg]gZf^lhgma^m^kfbgZe>jnbif^gm'
;^e`Z\hflaZeeghm[^ebZ[e^_hkZgrbg]bk^\mhkbffZm^kbZeehlllnlmZbg^][rma^
<nlmhf^kZlZk^lnemh_ma^fZe_ng\mbhgbg`h_ma^m^kfbgZe>jnbif^gm%ln\aZl
Zgrehllh_ikh]n\mbhg%k^o^gn^hk\hgmkZ\ml'
Ma^@^g^kZeM^kfl Zg]<hg]bmbhgl _hk ma^ LZe^ h_M^kfbgZe >jnbif^gm \Zg
[^ h[mZbg^] hg k^jn^lm _khf Zgr ;^e`Z\hf l^kob\^ ZoZbeZ[e^ mh ma^ in[eb\
hkZmppp'[^e`Z\hf'[^
Version 4, 16.09.2005
;^e`Z\hfL:ng]^kin[eb\eZp%
;]']nKhb:e[^kmBB+0%;&*),);knll^elO:M;>)+)+'+,2'2.*%;knll^elK^`blm^kh_E^`Ze>gmbmb^l
30
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / appendix.fm / 13.10.2008
Appendix
Writing and editing a text
message
The following rules apply when writing a
text message:
u The cursor is controlled with t s.
u Characters are added to the left of the
cursor.
u Press the hash key # briefly to switch
from "Abc" mode to "123", from "123"
to "abc" and from "abc" to "Abc" (uppercase: 1.st letter uppercase, all others
lowercase). Press the hash key #
before entering the letter.
u Press the hash key # three times:
Shows the selection line of the characters assigned to the hash key.
u The first letter of the name of directory
entries is automatically capitalised, followed by lowercase letters.
Editing text
When you press a key and hold it, the
characters of that key appear in the bottom display line and are highlighted one
after the other. When you release the key,
the highlighted character is inserted into
the input field. For how to enter special
characters, see page 31.
The display briefly shows whether uppercase or lowercase letters or digits are
selected when you switch from one mode
to the next: The bottom text line displays
"abc -> Abc", "Abc -> 123" or "123 -> abc".
Order of directory entries
The directory entries are usually sorted in
alphabetical order. Spaces and digits take
first priority. The sort order is as follows:
1. Space (shown here as s)
2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
To get round the alphabetical order of the
entries, insert a space or a digit in front of
the name. These entries will then move to
the beginning of the directory. Names that
you have preceded with an asterisk will
move to the end of the directory.
Entering special characters
Standard characters
*)
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
13x
14x
1
Q
**)
Space
Space
1
Â
£
$
¥
¤
1
â
£
$
¥
¤
P
#
.
,
*
/
Abc-->
123
?
!
0
+
:
¿
¡
“
‘
;
_
(
)
<
=
>
%
#
@
\
&
§
123 -->
abc
Version 4, 16.09.2005
*) Directory and other lists
**) When writing an SMS
31
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / accessories_SAG.fm / 05.07.2007
Wall mounting for base station
Version 4, 16.09.2005
Wall mounting for
base station
32
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / E360SIX.fm / 05.07.2007
Index
Index
A
Activating
advisory tones . . . . . . . . . . . . . . . . 24
auto answer . . . . . . . . . . . . . . . . . . 23
keypad lock . . . . . . . . . . . . . . . . . . 12
SMS function . . . . . . . . . . . . . . . . . 19
suppressing ringtone . . . . . . . . . . . 24
Activating/deactivating SMS function . 19
Advisory tones . . . . . . . . . . . . . . . . . . 24
Alarm clock . . . . . . . . . . . . . . . . . . . . 25
Answering machine, see also
Network mailbox
Auto answer . . . . . . . . . . . . . . . . 11, 23
B
Base station
changing system PIN . . . . . . . . . . . . 25
installing and connecting . . . . . . . 5, 6
operating on PABX . . . . . . . . . . . . . 26
power consumption . . . . . . . . . . . . 29
restoring default settings . . . . . . . . 26
setting . . . . . . . . . . . . . . . . . . . . . . 25
wall mounting . . . . . . . . . . . . . . . . 32
Battery
charging. . . . . . . . . . . . . . . . . . . . . . 8
display . . . . . . . . . . . . . . . . . . . . . 1, 8
fitting. . . . . . . . . . . . . . . . . . . . . . . . 6
icon . . . . . . . . . . . . . . . . . . . . . . . . . 8
warning tone . . . . . . . . . . . . . . . . . 25
Version 4, 16.09.2005
C
Call
answering . . . . . . . . . . . . . . . . . . . 11
caller listening in . . . . . . . . . . . . . . 23
internal . . . . . . . . . . . . . . . . . . . . . 22
transferring (connecting) . . . . . . . . 22
Call waiting, internal call . . . . . . . . . . 22
Calling back caller . . . . . . . . . . . . . . . 16
Calling back from calls list . . . . . . . . . 16
Calling line identification . . . . . . . . . . 11
Calls list . . . . . . . . . . . . . . . . . . . . 15, 16
Cancelling (operation) . . . . . . . . . . . . 13
Care of the telephone . . . . . . . . . . . . 27
Changing PIN . . . . . . . . . . . . . . . . . . . 25
Changing system PIN . . . . . . . . . . . . . 25
Characters
deleting . . . . . . . . . . . . . . . . . . . . . 13
Charge status (battery) . . . . . . . . . . 1, 8
Charge status display . . . . . . . . . . . . . 8
CLI . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CLI, CLIP . . . . . . . . . . . . . . . . . . . . . . 11
CLIP . . . . . . . . . . . . . . . . . . . . . . . . . 11
Confirmation tone. . . . . . . . . . . . . . . 24
Connection socket for headset . . . . . . . 1
Control key . . . . . . . . . . . . . . . . . . 1, 12
Correcting incorrect input . . . . . . . . . 13
D
Deactivating
advisory tones . . . . . . . . . . . . . . . . 24
auto answer . . . . . . . . . . . . . . . . . 23
keypad lock . . . . . . . . . . . . . . . . . . 12
SMS function . . . . . . . . . . . . . . . . . 19
suppressing ringtone . . . . . . . . . . . 24
Dialling
directory . . . . . . . . . . . . . . . . . . . . 14
mode . . . . . . . . . . . . . . . . . . . . . . 26
Directory . . . . . . . . . . . . . . . . . . . . . 13
opening . . . . . . . . . . . . . . . . . . . . 12
order of entries . . . . . . . . . . . . . . . 31
selecting entry . . . . . . . . . . . . . . . . 14
sending entry/list to handset . . . . . 14
storing entry . . . . . . . . . . . . . . . . . 14
storing the first number . . . . . . . . . 14
Display
changing display language . . . . . 8, 23
in idle status . . . . . . . . . . . . . . . . . . 1
keys . . . . . . . . . . . . . . . . . . . . . 1, 12
network mailbox message . . . . . . . 21
number (CLI/CLIP) . . . . . . . . . . . . . 11
setting . . . . . . . . . . . . . . . . . . . . . 23
Displaying
phone number (CLIP) . . . . . . . . . . . 11
E
Earpiece volume . . . . . . . . . . . . . . . . 24
Electricity consumption, see
Power consumption
End call key. . . . . . . . . . . . . . . . . . 1, 11
Entering flash . . . . . . . . . . . . . . . . . . . 1
Error tone . . . . . . . . . . . . . . . . . . . . . 24
G
Guarantee terms . . . . . . . . . . . . . . . . 30
H
Handset
activating/deactivating . . . . . . . . . . 12
33
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / E360SIX.fm / 05.07.2007
Index
advisory tones . . . . . . . . . . . . . . . . 24
contact with liquid . . . . . . . . . . . . . 27
display language . . . . . . . . . . . . . 8, 23
idle status . . . . . . . . . . . . . . . . . . . 13
loudspeaker volume . . . . . . . . . . . . 24
operating and charging times . . . . . 29
registering . . . . . . . . . . . . . . . . . . . 21
restoring default settings . . . . . . . . 25
searching for . . . . . . . . . . . . . . . . . 22
setting (individual) . . . . . . . . . . . . . 23
setting up for use . . . . . . . . . . . . . . . 6
transferring a call . . . . . . . . . . . . . . 22
using several handsets . . . . . . . . . . 21
Handsfree operation . . . . . . . . . . . . . 11
key . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hash key . . . . . . . . . . . . . . . . . . . . 1, 12
Headset . . . . . . . . . . . . . . . . . . . . . . . . 1
Hearing aids . . . . . . . . . . . . . . . . . . . . 4
I
Idle status (display) . . . . . . . . . . . . 1, 13
Incorrect input (correction). . . . . . . . . 13
Installing, base station . . . . . . . . . . . . . 5
Internal
listening in . . . . . . . . . . . . . . . . . . . 23
making calls . . . . . . . . . . . . . . . . . . 22
Internal call . . . . . . . . . . . . . . . . . . . . 22
call waiting . . . . . . . . . . . . . . . . . . . 22
K
Key click . . . . . . . . . . . . . . . . . . . . . . 24
Keypad lock . . . . . . . . . . . . . . . . . . . . 12
Keys
control key . . . . . . . . . . . . . . . . . 1, 12
display keys . . . . . . . . . . . . . . . . 1, 12
end call key . . . . . . . . . . . . . . . . 1, 13
handsfree key . . . . . . . . . . . . . . . . . . 1
hash key . . . . . . . . . . . . . . . . . . . 1, 12
keypad lock . . . . . . . . . . . . . . . . . . 12
message key . . . . . . . . . . . . . . . . . . 15
on/off key . . . . . . . . . . . . . . . . . . . . . 1
paging key . . . . . . . . . . . . . . . . . . . . 1
recall key . . . . . . . . . . . . . . . . . . . . . 1
talk key . . . . . . . . . . . . . . . . . . . . . . 1
Version 4, 16.09.2005
L
Last number redial . . . . . . . . . . . . . . . 15
Liquid . . . . . . . . . . . . . . . . . . . . . . . . 27
List
calls list . . . . . . . . . . . . . . . . . . 15, 16
34
draft message list (SMS) . . . . . . . . .
entry . . . . . . . . . . . . . . . . . . . . . . .
incoming message list (SMS) . . . . .
last number redial list. . . . . . . . . . .
missed calls . . . . . . . . . . . . . . . . . .
Listening in to call . . . . . . . . . . . . . . .
Lock (keypad) . . . . . . . . . . . . . . . . . .
Loudspeaker volume . . . . . . . . . . . . .
17
16
18
15
16
23
12
24
M
Mains adapter . . . . . . . . . . . . . . . . . . . 4
Making calls
answering a call . . . . . . . . . . . . . . . 11
external . . . . . . . . . . . . . . . . . . . . . 11
internal . . . . . . . . . . . . . . . . . . . . . 22
Making cost-effective calls . . . . . . . . . 16
Medical appliances . . . . . . . . . . . . . . . 4
Menu
back one menu level . . . . . . . . . . . 13
end tone . . . . . . . . . . . . . . . . . . . . 24
menu guidance . . . . . . . . . . . . . . . 13
overview . . . . . . . . . . . . . . . . . . . . . 9
Message key
opening list . . . . . . . . . . . . . . . . . . 18
opening lists . . . . . . . . . . . . . . . . . 15
Missed call . . . . . . . . . . . . . . . . . . . . 16
N
Network mailbox. . . . . . . . . . . . . . . . 21
storing entry . . . . . . . . . . . . . . . . . 21
Number
displaying caller's number (CLIP) . . . 11
entering the number of the network
mailbox . . . . . . . . . . . . . . . . . 21
setting for SMS centre . . . . . . . . . . 19
storing in directory. . . . . . . . . . . . . 14
O
On/off key . . . . . . . . . . . . . . . . . . . . . 1
Operation (preparing to use
the phone) . . . . . . . . . . . . . . . . . . 5
Order of entries in directory . . . . . . . . 31
P
PABX
operating base station on PABX . . . 26
setting dialling mode . . . . . . . . . . . 26
setting flash time . . . . . . . . . . . . . . 26
SMS . . . . . . . . . . . . . . . . . . . . . . . 19
switching to tone dialling . . . . . . . . 26
Pack contents . . . . . . . . . . . . . . . . . . . 5
Gigaset E360 / BEL-en / A31008-M1805-E151-1-7419 / E360SIX.fm / 05.07.2007
Index
Paging . . . . . . . . . . . . . . . . . . . . . . 1, 22
Phone jack assignment . . . . . . . . . . . . . 6
Phone number
displaying caller's number (CLIP) . . . 11
Power consumption (base station) . . . 29
Q
Questions and answers . . . . . . . . . . . 27
R
Recall key . . . . . . . . . . . . . . . . . . . . . . 1
Registering (handset) . . . . . . . . . . . 7, 21
Restoring default settings
base station . . . . . . . . . . . . . . . . . . 26
handset . . . . . . . . . . . . . . . . . . . . . 25
Ringtone
changing . . . . . . . . . . . . . . . . . . . . 24
setting melody . . . . . . . . . . . . . . . . 24
setting volume . . . . . . . . . . . . . 12, 24
suppressing . . . . . . . . . . . . . . . . . . 24
Version 4, 16.09.2005
S
Safety precautions . . . . . . . . . . . . . . . . 4
Searching
handset . . . . . . . . . . . . . . . . . . . . . 22
in directory . . . . . . . . . . . . . . . . . . . 14
Sending
directory entry to handset . . . . . . . . 14
SMS . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting date . . . . . . . . . . . . . . . . . . . . . 8
Setting flash time (PABX) . . . . . . . . . . 26
Setting melody (ringtone) . . . . . . . . . 24
Setting time . . . . . . . . . . . . . . . . . . . . . 8
Setting volume
earpiece . . . . . . . . . . . . . . . . . . . . . 24
handset loudspeaker . . . . . . . . . . . . 24
loudspeaker . . . . . . . . . . . . . . . . . . 24
ringtone . . . . . . . . . . . . . . . . . . . . . 24
Setting wake up time . . . . . . . . . . . . . 25
Shortcut (digit combination) . . . . . . . . 9
SMS . . . . . . . . . . . . . . . . . . . . . . . . . 17
deleting . . . . . . . . . . . . . . . . . . . . . 17
draft message list . . . . . . . . . . . . . . 17
forwarding . . . . . . . . . . . . . . . . . . . 19
incoming message list. . . . . . . . . . . 18
reading . . . . . . . . . . . . . . . . . . . . . 17
replying to and forwarding . . . . . . . 18
self help with error messages . . . . . 20
send centre . . . . . . . . . . . . . . . . . . 17
sending . . . . . . . . . . . . . . . . . . . . . 17
to PABX . . . . . . . . . . . . . . . . . . . . .
troubleshooting . . . . . . . . . . . . . . .
writing . . . . . . . . . . . . . . . . . . . . .
writing text . . . . . . . . . . . . . . . . . .
SMS centre
changing number . . . . . . . . . . . . .
setting . . . . . . . . . . . . . . . . . . . . .
Special characters . . . . . . . . . . . . . . .
Speed dialling
network mailbox . . . . . . . . . . . . . .
Speed dialling list . . . . . . . . . . . . . . .
Suppressing
first ring . . . . . . . . . . . . . . . . . . . .
19
20
17
31
19
19
31
21
15
24
T
Talk key . . . . . . . . . . . . . . . . . . . . . . . 1
Technical data . . . . . . . . . . . . . . . . . . 29
Text message, see SMS
Tone dialling . . . . . . . . . . . . . . . . . . . 26
Troubleshooting . . . . . . . . . . . . . . . . 27
SMS . . . . . . . . . . . . . . . . . . . . . . . 20
V
Viewing network mailbox message . . 21
Volume
ringtone . . . . . . . . . . . . . . . . . . . . 24
W
Wall mounting for base station . . . . . 32
Warning tone (battery) . . . . . . . . . . . 25
Writing, editing text . . . . . . . . . . . . . 31
35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising