Powerful and Durable Paper Cutter

Powerful and Durable Paper Cutter
Paper Cutter PC-450
PC-450
Paper Cutter
Powerful and Durable Paper Cutter
Features
1. Accurate Cutting - The backgauge enables you to adjust the cutting length accurately by 0.5mm / 0.019".
2. Cutting line - The LED cutting line shows the actual cutting position. It allows the safe and smooth
operation.
3. Safety - The APC-450 is activated only when the two cutting buttons are simultaneously pressed. The
machine does not operate when the front cover is opened. Also, if either of two cutting buttons is released
during the cutting operation, the machine stops immediately. There is also the cover on the back of the
table for the safety for the maximum safety.
Paper Cutter PC-450
With the cutting capacity of even A3 long-side width and
maximum lift 7 cm / 2.75”. Easy cutting operation by simply
pressing the cutting buttons.
Easy Operation
Clamp the stock by turning the pressure handle by hand, and
press two cutting buttons.
Pressure Handle
Cutting Length Adjustment
Backgauge
The backgauge can be adjusted by 0.5 mm / 0.019" by turning the
handle at the front table. The backgauge can be locked when you
Backgauge
Handle
repeat the same cutting job.
Cutting Buttons
Operator Safety
Double Safety Circuit
If the error occurs, the machine detects the trouble part.
Also, the relay with forcibly guided contacts are provided to
secure the safety.
Safety Mechanism
The machine does not operate when the front cover is opened.
Also, if either of two cutting buttons is released during the cutting
operation, the machine will be stopped immediately.
Key Switch
Cutting Height
Max. 446 mm / 17.5”
Cu
tt
He ing
igh
t
Max. 70 mm / 2.75”
De
ut
C
pt
h
The Power switch can be key-activated to limit user access.
PC-450 Specifications
Cutting Width
Max. 450 mm / 17.7”
Min. 20 mm / 0.79”
Cutting Depth
The special cutouts are provided on both edges of clamp to pre-
Clamp System and Manual
Pressure
Max. About 10 kN (1,000 kgf)
Cu
tti
ng
th
Cutting Speed
3.3 seconds per cycle (50 Hz)
2.8 seconds per cycle (60 Hz)
Voltage/Frequency
Single Phase 100 V, 50 / 60 Hz
Single Phase 115 V, 50 / 60 Hz
Single Phase 230 V, 50 / 60 Hz
Rated Current
Single Phase 115 V, 50 / 60 Hz, 13 A
Single Phase 230 V, 50 / 60 Hz, 13 A
Machine
Dimensions
W830 x D890 x H1,300 mm / W32.7" x D35.1" x H51.2"(Including
the parts projected such as handle)
W800 x D810 x H1,190 mm / W31.5" x D31.9" x H46.9"(excluding
the parts projected such as handle)
Machine Weight
216 kg / 475.8 lb (Without transformer)
Cut cycles are indicated on a digital counter. It helps to determine
when the cutting knife should be replaced.
id
W
Counter
g
vent the book spine from crushing.
tin
Clamp
*The machine design and specifications are subject to change without any notice.
141003/MM/PC450/00E/TV
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising