important!!

important!!
CARE AND MAINTENANCE
FRAMES
Cleaning - Use mild soap and warm water. Do not use abrasive materials, cleansers or
bleach products. Rinse with clean water and dry thoroughly.
Maintenance - Periodically clean and dry thoroughly. Be sure to drain any water
accumulated inside the frames. To thoroughly drain frames, remove foot caps and tilt the
frames, if necessary, to remove all water. This is critical. Water allowed to accumulate
inside the frames and then exposed to sub-freezing temperatures can cause damage to
the frame tubing. Such damage is not covered under warranty. Always clean, drain and
dry thoroughly before storing for the winter. For best results, always store or cover your
furniture when not in use (furniture cover included). We recommend commercially
available outdoor furniture covers. Any small nicks or scratches can be covered with a
light application of touch-up paint.
** When cleaning or moving large or heavy items, always have two people work
together. Never drag furniture.
FABRICS (CUSHIONS/SLINGS)
Cleaning - Wipe minor spills immediately. Clean with mild soap, warm clean water and
a soft cloth. Do not use abrasive materials and cleansers. Although fabric has been
treated to resist stains, occasional use of commercially available fabric cleaners may be
necessary. Follow manufacturer's instructions.
Maintenance - The best way to maintain the beauty of cushions and slings is to store
them in a dry area and out of the elements when not in use, or cover with commercially
available outdoor furniture covers.
PORCELAIN
To ensure the lasting beauty of your porcelain table top. Please refer to the special
porcelain care label that is attached to the underside of your table top. Detailed care and
maintenance instructions are also available by visiting our website at www.agiousa.com/porcelaincare or by calling our Customer Service Centre at 1-888-383-1932.
Sep-13-2013
KIRKLAND SIGNATURE™
5 PIECE FIREPLACE SEATING GROUP
ITM./ART. 966646
PATIO FURNITURE
ASSEMBLY INSTRUCTIONS
IMPORTANT
RETAIN FOR FUTURE
REFERENCE: READ
CAREFULLY BEFORE
ASSEMBLY
MAKE SURE YOU HAVE ALL THE PARTS & HARDWARE
AS IDENTIFIED ON THE PARTS LIST
MISSING PARTS OR DAMAGED PARTS?
Please call our customer service
:1-888-383-1932 (English and French)
US & Canada
United Kingdom :0-800-092-1653 (English)
or visit our website at www.agio-usa.com
CUSTOMER SERVICE HOURS ARE 9:00AM - 5:00PM
MONDAY - FRIDAY EST.
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS AND TO RECEIVE
UPDATED PRODUCT INFORMATION, BE SURE TO REGISTER YOUR
PURCHASE ON OUR WEBSITE AT: www.agio-usa.com
FOR ADDITIONAL SUPPORT ON CARE AND MAINTENANCE OF
YOUR AGIO OUTDOOR FURNITURE PLEASE VISIT OUR WEBSITE
AT: www.agio-usa.com/support
Agio International
1337 Taylor Farm Road, # 100
Virginia Beach, VA 23453
ACF03819
MADE IN CHINA
E
SPECIAL WARNINGS
THIS ITEM IS INTENDED FOR OUTDOOR DOMESTIC USE ONLY, NOT FOR
COMMERCIAL USE.
LIMITED 7 YEAR WARRANTY
· Aluminum Frame. Frame construction is warranted against defects in material and
workmanship for seven years from purchase date. Damage to frames or welds resulting
from improper assembly or exposure to water and/or sub-freezing temperatures is not
covered.
LIMITED 1 YEAR WARRANTY
· Finishes. Paint finishes are warranted against peeling, cracking and blistering for one
year from purchase date provided the unit has not been scratched or abraded. Chips and
scratches resulting from normal wear and tear are not covered.
· Fabrics. Fabric and cushions (if applicable) are warranted against separation at the
seams for one year from purchase date. Fading and/or discoloration resulting from
exposure to the elements, oils, spills, fluids, chemicals, or any other cause is not
Warranty limitations: This warranty is subject to the limitations set forth above. In
addition, this warranty is made to the original purchaser only, and is effective only when
item(s) is purchased from one of our authorized dealers. This warranty is not
transferable. For warranty replacements based on warranty claims submitted within first
year of purchase, we will pay shipping and handling charges within continental North
America. After the first year, shipping and handling charges are your responsibility. We
will not be responsible for charges associated with shipments outside continental North
America at any time or for any reason.
Warranty exclusions: This warranty is subject to the exclusions as set forth above. In
addition, the following are excluded from coverage under this warranty: display models
or items purchased "as is"; freight damage; items subject to misuse, abuse, neglect or
lack of proper care and maintenance (including without limitation as provided in any
"care and maintenance guide"); normal wear and tear; damage caused by acts of nature,
acts of force majeure, vandalism, fire or other casualty, or improper assembly; hardware
against corrosion or rusting; purchased or replacement parts; and all plastic parts. Also
excluded are loss of use or time; inconvenience; money; travel; packaging or incidental,
special or consequential damages of any kind. Replacement of defective items as
provided herein shall constitute your sole and exclusive remedy for items which are not
as warranted. In no event shall our responsibility exceed the purchase price of the items
found to be other than as warranted. This warranty is the exclusive statement of your
rights with respect to the defects in the items you have purchased and supersedes any
other express warranty or statement, written or oral, made in connection with the
purchase and sale of such items. When used herein, the term "item" when used in the
singular, refers to the specific item found to be defective, and not to the entire set of
which the item is a part.
Some states do not allow exclusion or limitation of incidental or consequential
damages, so the limitation above may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to
state.
covered.
· Table tops. Porcelain table tops are warranted against defects in materials and
workmanship for one year from purchase date. All other tabletops (including without
limitation glass and faux stone) are not covered under any circumstances.
*Agio will be responsible for the shipping and handling charges within the North
American continent for the first year for all valid warranty claims. After the first
year, shipping and handling charges are the responsibility of the claimant. We do
not ship outside of the North American continent.
Every Kirkland Signature Product is guaranteed to meet or exceed the quality
standards of the leading national brands. If you are not completely satisfied, your
money will be refunded by Costco.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Sep-13-2013
* NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE
PARTS LIST
DESCRIPTION
ORDER PART # QTY
A
BACK FRAME
AH1136
1
B
SEAT FRAME
AH1137
1
C
LEFT LEG
AH1138
1
D
RIGHT LEG
AH1139
1
E
LEG SUPPORT
AH1140
1
F
SHORT SCREW
HW0035
2
G
MIDDLE SCREW
HW0752
2
H
LONG SCREW
HW0086
6
I
WASHER
HW0004
6
J
SCREW COVER
HW0105
6
K
SCREW COVER
HW0022
2
L
ALLEN WRENCH
HW0252
1
M
FOOT CAP-1
FC0716
2
N
FOOT CAP-2
FACTORY ASSEMBLY
FC0010
2
O
FURNITURE COVER
22-FC-0107
1
KIRKLAND SIGNATURE™
5 PIECE FIREPLACE SEATING GROUP
ITM./ART. 966646
IMPORTANT!!
PLEASE READ ENTIRE
INSTRUCTION SHEET
BEFORE ASSEMBLY!!
*The furniture cover (O) is designed to protect your investment from the elements and will repel
water. Please note the cover is not 100% waterproof and moisture may seep in if allowed to collect.
Sep-13-2013
1
E
1
B
2
A
D
H
I
3X
Sep-13-2013
G
2
E
3
C
4
E
G
F M
I
H
F
Sep-13-2013
3
M
E
5
6
L
6X
J
K
L
6X
2X
2X
2X
L
Sep-13-2013
4
E
7
N
Sep-13-2013
5
E
8
N
Sep-13-2013
6
E
9
If you have any questions, please call our Customer Service Center in the US and Canada at 1-888-383-1932,
9:00am - 5:00pm Monday - Friday, EST. English and French, or you may email [email protected],
United Kingdom at 0-800-092-1653.
Sep-13-2013
7
E
KIRKLAND SIGNATURE™ 5 PIECE FIREPLACE SEATING GROUP
ITM./ART. 966646
ASSEMBLY INSTRUCTIONS
RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY BEFORE ASSEMBLY
CSA Model
Installer: Leave these instructions with consumer.
Consumer: Keep these instructions for future reference.
DANGER If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from
the appliance and immediately call
your gas supplier or fire department.
WARNING: Chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm are
created by the combustion of propane.
WARNING: For Outdoor Use Only
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.
FOR USE WITH 20LB (9KG) PROPANE
CYLINDER WITH TYPE 1 CONNECTION OR FOR
USE WITH NATURAL GAS AFTER CONVERSION
KIT IS INSTALLED (MUST BE PROFESSIONALLY
INSTALLED) ALSO THE LP REGULATOR MUST
BE SUPPLIED BY THE MANUFACTURER.
CARBON MONOXIDE HAZARD
This appliance can produce carbon
monoxide which has no odor.
Using it in an enclosed space can kill
you.
Never use this appliance in an enclosed
space such as a camper, tent, car or
home.
Questions, Problems, Missing Parts? Before returning to
your retailer, call our customer service department in the US
and Canada at 1-888-383-1932, 9:00am - 5:00pm Monday –
Friday, EST. English and French, or you may email
[email protected], United Kingdom at
0-800-092-1653.
Sep-18-2013
DRF02200
WARNING: Improper installation, adjustment alteration,
service or maintenance can cause injury or
property damage. Read the installation,
operating and maintenance instructions
thoroughly before installing or servicing this
equipment.
WARNING
DANGER
98300
1
WARNING:
USE FACTORY APPROVED
REPLACEMENT PARTS AND
ACCESSORIES ONLY. USE
OF UNAPPROVED PART OR
ACCESSORIES CAN VOID
THE WARRANTY ON THIS
PRODUCT AND RESULT IN A
HAZARDOUS CONDITION.
PLEASE CONTACT US FOR
INFORMATION REGARDING
REPLACEMNT HOSES,
THERMOCOUPLES,
ELECTRODES, IGNITION
MODULES, FIRE ICE, LOGS,
FIRE ICE, ETC.
TABLE OF CONTENTS
Important Safety Information
3
Important Information About Propane
4
Specification
4
Parts Identification List
5-6
Installation
6-7
Natural Gas Conversion
8
Batteries
9
Lighting Instructions
9
Burner cover assembly
10
Maintenance
10
Troubleshooting Guide
11
Warranty
12-13
For additional online video support on troubleshooting
and set up, please feel free to visit our website at:
www.agio-usa.com/support/firepits
2
Sep-18-2013
IMPORTANT SAFETY INFORMATION
The installation must conform with local codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA 54; International Fuel Gas Code; Natural Gas and
Propane Installation Code, CSA B149.1; or Propane Storage and Handling Code, B149.2, as
applicable.
The appliance and its appliance main gas valve must be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in excess of 1/2 psi
(3.5kPa).
The appliance must be isolated from the gas supply piping system by closing its equipment
shutoff valve during any pressure testing of the gas supply system at test pressure equal to or
less than 1/2 psi (3.5kPa).
The appliance area must be kept clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
Do not use this appliance if any part has been under water. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas
control which has been under water.
Children and adults should be alerted to the hazards of high surface temperatures and
kept at a safe distance to avoid burns or clothing ignition.
Young children should be carefully supervised when they are anywhere near the
appliance.
Clothing or other flammable material should not be hung from the appliance, or placed
on or near the appliance.
Any screen or guard removed for servicing an appliance shall be replaced prior to
operating the appliance.
Installation and repair should be done by a qualified service person. The appliance
should be inspected before use and at least annually by a professional service person.
More frequent cleaning may be required as necessary. It is imperative that the control
compartments, burners and circulating air passageways of the appliance be kept clean.
Do NOT burn solid fuels in this gas fireplace.
CAUTION: The propane gas pressure regulator provided with this appliance must be used. This
regulator is set for an outlet pressure of 11 in / 2.74 kPa water column.
This outdoor gas appliance is not intended to be installed in or on recreational vehicles and/or
boats.
Before each use of this gas appliance, open the LP (Liquid Propane) Tank Drawer and inspect
the LP Hose. If there is evidence of excessive abrasion or wear, or the hose is cut, it must be
replaced prior to the gas appliance being put into operation. Use only the replacement hose
assembly specified in this manual. Inspect the burner before each use of the appliance. The
burner must be replaced prior to the appliance being put into operation if it is evident that the
burner is damaged. Use only the burner listed in these instructions. Keep the fuel supply hose
away from any heated surfaces.
3
Sep-18-2013
IMPORTANT SAFETY INFORMATION ABOUT
PROPANE (LP) GAS
An LP-gas cylinder for use with this appliance must have a capacity of 20 lbs. / 9kgs
and must be equipped with a Type 1 connector and an OPD (overfill protection
device). Figure 1
The LP-gas supply cylinder to be used must be constructed and marked in
accordance with the specification for LP-gas cylinders of the U.S. Department of
Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339,
Cylinder, Sphere and Tubes for the Transportation of Dangerous Goods.
 The cylinder supply system must be arranged for vapor withdrawal.
 The cylinder used must include a collar to protect the cylinder valve.
 This appliance shall be used only outdoors in a well-ventilated space and shall
not be used in a building, garage or any other enclosed space.
 When this appliance is not is use, the gas must be turned off at the supply
cylinder.
 Storage of this appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance.
 Cylinders must be stored outdoors in a well-ventilated area out of the reach of
children. Disconnected cylinders must have threaded valve plugs tightly
installed and must not be stored in a building, garage or any other enclosed
areas.
CSA (Canadian Standards Association) certified to ANSI Z21.97•CSA 2.41-2012
“Outdoor Decorative Gas Appliances”
The gas hose is routed through a “U” bolt to prevent the hose from coming in contact
with the burner. DO NOT remove the hose from the “U” bolt. See Figure 2.
Regulator hose
pointed down
Figure 1
Figure 2
SPECIFICATIONS
INPUT
Propane Regulator
Pressure
Natural Gas Minimum
Inlet Pressure
Clearances to
combustible surfaces
30,000 Btu/hr
11 in / 2.74 kPa water column
7 in / 1.74 kPa water column
Sides
24 in / 60.96 cm
4
Sep-18-2013
20,000 Btu/hr Low fire
Top: 72 in / 182.88 cm
PARTS IDENTIFICATION LIST
PART
DESCRIPTION
PART#
QTY
A
CONTROL KNOB
FP0245
1
B
GAS VALVE
FP0307
1
C
THERMOCOUPLE
FP0004
1
D
LP REGULATOR HOSE
FP0308
1
E
F
ELECTRODE
GAS TUBE
FP0003
FP0309
1
1
G
ORIFICE ELBOW
FP0310
1
H
IGNITION MODULE
FP0006
1
I
ORIFICE BRACKET
FP0311
1
J
PROPANE ORIFICE
FP0312
1
K
NATURAL GAS ORIFICE
FP0313
1
L
LP TANK RETAINING KNOB
FP0585
2
M
FIRE ICE SET
FP1078
1
N
ADJUSTABLE FOOT CAPS
FC0553
4
O
BOLTS
HW0036
4
P
WASHERS
HW0103
4
Q
HEX BOLT DRIVER
HW0252
1
R
FIREPIT TABLETOP
FP1085
1
S
FIREPIT BASE
FP1086
1
T
FIREPAN/BURNER
ASSEMBLY
FP1087
1
U
BURNER COVER
FP1088
1
“AAA” BATTERY(1.5V)
HW0705
1
V
Sep-18-2013
5
INSTALLATION
1. Carefully unpack all items from the box. Place the base in the final position. There must be a
minimum of 24 in / 60.9 cm of clearance from the side of the table top to any combustible
walls.
2. Place the tabletop on the base. Secure the tabletop to the firepit base using the bolts and
washers that are provided. See Figure 3 and Figure 4.
Figure 3
Figure 4
3. Pour the fire ice into the burner pan completely covering the burner. See Figure 5.
BURNER PAN
Figure 5
IGNITION WELL
4. Remove the cardboard cover from the ignition well as shown in Figure 6.
CARDBOARD COVER
Figure 6
6
Sep-18-2013
5. Slide the tank drawer out and place the LP tank in the drawer. Connect the regulator as
shown in Figure 7. Screw the black handle clock-wise to tighten. Turn the handle counter
clock-wise to remove. The hose must point down. Check that the valve is turned all the way
clockwise to the "OFF" position. Open the tank valve. Apply a solution of soapy water to the
tank-regulator connection and to the valve-hose connection to check for leaks. If soap
bubbles continue to form, the connection has a leak. If a leak is found, close the tank valve
and tighten all connections.
NEVER USE A FLAME TO CHECK FOR LEAKS.
Figure 7
6. Tighten threaded knobs (L) found on tank tray (Figure 8) so that the LP tank cannot move
from side to side. Do not remove plastic cap from end of threaded section.
Figure 8
7
Sep-18-2013
NATURAL GAS CONVERSION
Natural gas conversion must be performed only by your natural gas provider or service
company.
1. Disconnect the regulator hose from the gas valve. See Figure 9.
Figure 9
2. Disconnect the gas tube from the orifice elbow. Remove the two M4 nuts and remove the
orifice holder. Replace the propane orifice with the natural gas orifice from the kit and
reinstall the orifice holder. Apply a solution of soapy water to all connections to check for
leaks. If soap bubbles continue to form, the connection has a leak. If a leak is found, close
the main valve and tighten all connections. NEVER USE A FLAME TO CHECK FOR
LEAKS.
3. Stick the conversion label on the rating plate as shown in Figure 10.
Metal Rating Plate
Serial Number
Model Number:
98300
CAUTION: The gas pressure regulator provided with this appliance must be used. This
regulator is set for an outlet pressure of 11 in water column (2.74 kPa). The gas supply must
be turned off at the LP-gas supply cylinder when this appliance is not in use.
This appliance has been converted to use Natural Gas.
Input 30,000 Btu/hr.
Max Gas Supply Pressure 7 inch water column(1.74 kPa) Min Gas Supply Pressure 5
inch water column (1.24 kPa)
FOR OUTDOOR USE ONLY. If stored indoors, detach and leave cylinder outdoors.
Figure 10
CONVERSION LABEL
8
Sep-18-2013
BATTERIES
Make sure the control knob is in the "OFF" position.
Unscrew the push button cap on the ignition module
located on the control panel to access the battery
compartment. The ignition module requires one
Alkaline AAA size battery (1.5V). The negative (-) end
goes in first. See Figure 11. Dispose of battery safely.
Battery may explode or leak if charged or disposed of in
fire. Make sure of the polarity. The battery is mercury
and cadmium free.
Figure 11
LIGHTING INSTRUCTIONS
Warning: If these instructions are not followed exactly,
a fire or explosion may result causing property
damage, personal injury or loss of life.
1. Open the tank drawer and find the control panel
on the left. Make sure the control knob is in the
"OFF" position. See Figure 12. Open the tank
valve all the way.
2. Push in the igniter button. You will hear a slight
clicking sound. With the igniter button pushed in,
push and turn the control knob to the “ON” position.
The fire should light within a few seconds. Once
the flame is lit, release the igniter button and
continue to hold the control knob in for 10 to 15
seconds. Release the control knob. The control
knob should pop back out and the fire remain lit.
Note: If the fire does not light, turn the knob to the
“OFF” position and wait five (5) minutes before
trying again.
Figure 12
3. To turn down the flame, push the control knob in slightly and turn to Medium (medium flame),
or Low (small flame).
4. To turn off the fire pit, turn the control knob to the “OFF” position and turn off the tank valve.
Sep-18-2013
9
BURNER COVER ASSEMBLY
1. Place the burner cover on the table top as shown in Figure13.
WARNING: BEFORE PLACING THE BURNER COVER ON, MAKE SURE THE FIREPIT
HAS BEEN SHUT OFF AND THE BURNER HAS COMPLETELY COOLED DOWN.
Figure 13
MAINTENANCE
The flames should look like those in Figure 14. To clean the burner, use a soft brush after the
burner has cooled completely. Never use a vacuum cleaner on the burner. It is recommended
to store the fire pit indoors during winter if it will be subjected to freezing temperatures. The LP
cylinder must be disconnected and removed from the appliance before the appliance can be
stored indoors.
Figure 14
10
Sep-18-2013
TROUBLESHOOTING GUIDE
PROBLEM
CAUSE
REMEDY
No Propane Gas at Burner
Check that gas tank valve is open. Turn
control knob to “ON” and push control
knob in. Make sure tank has propane
gas.
Burner won’t light
Check that AAA battery is installed with
negative (-) end first and has a charge.
Check that the wire is connected to the
ignition module. Check that the
electrode is not cracked or broken.
No Spark at Electrode
Burner won’t stay
lit after lighting
Thermocouple not in flame
Check that the tip of the thermocouple is
even with the top of the ignition well.
Remove any fire ice from the ignition
well.
Thermocouple connection
at the main control valve is
loose
Tighten the thermocouple nut at the
back of the valve.
No Fire Ice on Burner
Cover the burner with fire ice per the
instructions
11
Sep-18-2013
One Year Limited Warranty for Firepit
What is covered under this warranty?
Subject to the terms and conditions set forth below, fireplaces are warranted against
defects in material and workmanship for a period of one year.
If you have questions regarding care and maintenance of the item(s) you have purchased,
please see the accompanying care and maintenance guide or visit our website at
www.agio-usa.com. If you have further questions, please call our customer service center
in the US and Canada at 1-888-383-1932.
How Do I Obtain Warranty Service?
To obtain warranty service, you must contact our customer service center within the
relevant warranty period and provide us with a copy of your dated register receipt as proof
of the purchase date. We reserve the right to request photographs and/or return of the
defective item(s) and/or such other evidence relating to any claim as we shall reasonably
require. Warranty claims for missing or damaged items must be submitted within 90 days of
purchase. If you purchased our product through any of our dotcom retailers and receive a
damaged item, please contact the retailer to report shipping damage. Please call our
customer service center in the US and Canada at 1-888-383-1932 for additional warranty
claim details and procedures. You may also contact us by emailing
custome[email protected] Hours of operation are Monday-Friday 9:00 AM – 5:00 PM
Eastern Standard Time.
What are the Limitations and Exclusions of this Warranty?
Warranty Limitations: This warranty is subject to the limitations set forth above. In addition,
this warranty is made to the original purchaser only, and is effective only if items are
purchased from one of our authorized dealers. This warranty is not transferable. For
warranty replacements based on warranty claims submitted within one year of purchase,
we will pay shipping and handling charges within continental North America. After the first
year, shipping and handling charges are your responsibility. We will not be responsible for
charges associated with shipments outside continental North America at any time or for
any reason.
This warranty is given and relates to product sold to your retailer by an Agio International
Company, Limited; Dimension Industries Company, Limited; or Woven Design Company,
Limited. It may also relate to products otherwise sold under the Agio brand. Warranty
services are administered by Point of Impact, Inc., an independent contractor, which is not
responsible for the warranty obligations set forth herein.
Warranty exclusions: This warranty is subject to the exclusions set forth above. In
addition, the following are excluded from coverage under this warranty: any item used
for commercial, contract or any other non-residential purpose; display models or items
purchased “as is”; freight damage; items subject to misuse, abuse, neglect or lack of proper
care or maintenance (including without limitation as provided in any “care and maintenance
12
Sep-18-2013
guide” or similar information we provide); normal wear and tear; damage caused by acts of
nature, acts of force majeure, vandalism, fire or other casualty, or improper assembly;
hardware against corrosion or rusting; purchased or replacement parts; and all plastic parts.
Also excluded are loss of use or time; inconvenience; money; travel; packaging or
incidental, special or consequential damages of any kind. Replacement of defective items
or parts as provided herein, or prorated refund of your purchase price, at our sole discretion,
shall constitute your sole and exclusive remedy for items which are not as warranted. In no
event shall our responsibility exceed the purchase price of the item found to be other than
as warranted. This warranty is the exclusive statement of your rights with respect to items
you have purchased and supersedes any other express warranty or statement, written or
oral, made in connection with the purchase and sale of such items. The term “item” when
used herein in the singular refers to the specific piece found to be defective, and not to the
entire set of which the item is a part.
Some states do not allow exclusion or limitation of incidental or consequential damages, so
the limitation may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights that vary from state to state.
.
Every Kirkland Signature Product is guaranteed to meet or exceed the quality
standards of the leading national brands. If you are not completely satisfied, your
money will be refunded by Costco.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
13
Sep-18-2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement