COLORdash Batten-Quad 12 User Manual

COLORdash Batten-Quad 12 User Manual
User Manual
Edition Notes
Edition Notes
The COLORdash™ Batten-Quad 12 User Manual Rev. 4 covers the description, safety
precautions, installation, programming, operation, and maintenance of the
COLORdash™ Batten-Quad 12. Chauvet released this edition of the COLORdash™
Batten-Quad 12 User Manual in April 2015.
Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons LLC. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the
dotted triangle, and all other trademarks in this manual pertaining to services, products,
or marketing statements are owned or licensed by Chauvet. Any other product names,
logos, brands, company names, and other trademarks featured or referred to within this
document are the property of their respective trademark holders.
Copyright Notice Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use Chauvet authorizes its customers to download and print this manual for professional
information purposes only. Chauvet expressly prohibits the usage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose
without written consent from Chauvet.
Document Printing For better results, print this document in color, on letter size paper (8.5 x 11 in), doublesided. If using A4 paper (210 x 297 mm), configure your printer to scale the content
accordingly.
Intended Audience Any person in charge of installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as this manual,
before installing, operating, or maintaining this product.
Disclaimer Chauvet believes that the information contained in this manual is accurate in all
respects. However, Chauvet assumes no responsibility for any errors or omissions in
this document. Chauvet reserves the right to revise and make changes to the content of
this document without obligation that Chauvet notify any person or company of such
revision or changes. This does not in any way constitute a commitment by Chauvet to
make such changes. Chauvet may issue a revision of this manual or a new edition to
incorporate such changes.
Document Revision The COLORdash™ Batten-Quad 12 User Manual Rev. 4 supersedes all previous
versions of this manual. Discard any older versions of this manual you may have,
whether in printed or electronic format, and replace with this version.
Author
D. Couppe
Date
3/31/15
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Editor
M. Trouard
Date Finalized
4/9/15
Table of Contents
Table of Contents
1. Before You Begin ...................................................................................................................................... 1
What is Included ........................................................................................................................................................... 1
Claims .......................................................................................................................................................................................... 1
Manual Conventions .................................................................................................................................................................... 1
Symbols ....................................................................................................................................................................................... 1
Safety Notes ................................................................................................................................................................. 2
Personal Safety ............................................................................................................................................................................ 2
Mounting and Rigging .................................................................................................................................................................. 2
Power and Wiring ......................................................................................................................................................................... 2
Operation ..................................................................................................................................................................................... 2
Expected LED Lifespan ................................................................................................................................................ 2
2. Introduction ............................................................................................................................................... 3
Description .................................................................................................................................................................... 3
Features ........................................................................................................................................................................ 3
Overview ....................................................................................................................................................................... 4
Dimensions ................................................................................................................................................................... 5
3. Setup .......................................................................................................................................................... 6
AC Power ...................................................................................................................................................................... 6
AC Plug ........................................................................................................................................................................................ 6
Fuse Replacement ....................................................................................................................................................................... 6
Power Linking ............................................................................................................................................................... 7
DMX Linking.................................................................................................................................................................. 7
DMX Modes ................................................................................................................................................................................. 7
Master/Slave Connectivity............................................................................................................................................................ 7
Mounting ....................................................................................................................................................................... 8
Orientation ................................................................................................................................................................................... 8
Rigging ......................................................................................................................................................................................... 8
4. Operation ................................................................................................................................................... 9
Control Panel Description ............................................................................................................................................. 9
Control Options ............................................................................................................................................................. 9
Programming ................................................................................................................................................................ 9
DMX Personality ........................................................................................................................................................................ 10
DMX Control............................................................................................................................................................................... 10
Static Color ................................................................................................................................................................................ 10
Auto Programs ........................................................................................................................................................................... 11
Auto Test.................................................................................................................................................................................... 11
Master/Slave .............................................................................................................................................................................. 11
Dimmer Curves .......................................................................................................................................................................... 12
Software Information .................................................................................................................................................................. 12
Fixture Hours.............................................................................................................................................................................. 12
Backlight .................................................................................................................................................................................... 12
White Balance ............................................................................................................................................................................ 12
Menu Map ................................................................................................................................................................... 13
Menu Map (cont.) ........................................................................................................................................................ 14
DMX Values ................................................................................................................................................................ 15
52Ch .......................................................................................................................................................................................... 15
COLORdash™ Batten-Quad 12 Sections for DMX Control ....................................................................................... 15
DMX Values (cont.) ..................................................................................................................................................... 16
52Ch (cont.) ............................................................................................................................................................................... 16
48Ch .......................................................................................................................................................................................... 16
DMX Values (cont.) ..................................................................................................................................................... 17
48Ch (cont.) ............................................................................................................................................................................... 17
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-i-
Table of Contents
DMX Values (cont.) ..................................................................................................................................................... 18
10Ch .......................................................................................................................................................................................... 18
DMX Values (cont.) ..................................................................................................................................................... 19
6 Ch ........................................................................................................................................................................................... 19
4 Ch ........................................................................................................................................................................................... 19
5. Technical Information ............................................................................................................................. 20
Product Maintenance .................................................................................................................................................. 20
Returns ....................................................................................................................................................................... 20
Technical Specifications ............................................................................................................................................. 21
Contact Us ................................................................................................................................................... 22
-ii-
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Before You Begin
1. Before You Begin
What is Included
Claims
Manual Conventions
· COLORdash™ Batten-Quad 12
· Neutrik® powerCON® power cord
· 2 Trunnions
· Warranty card
· Quick Reference Guide
Carefully unpack the product immediately and check the box to make sure all the parts
are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention
1–512
50/60
<SET>
Settings
MENU>Settings
1–10
Yes/No
ON
Symbols
Meaning
A range of values in the text
A set of mutually exclusive values in the text
A button on the product’s control panel
A product function or a menu option
A sequence of menu options
A range of menu values from which to choose in a menu
A set of two mutually exclusive menu options in a menu
A unique value to be entered or selected in a menu
Symbols
Meaning
Critical installation, configuration, or operation information.
Failure to comply with this information may cause the product not
to work, damage third-party equipment, or cause harm to the
operator.
Important installation or configuration information. Failure to
comply with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-1-
Before You Begin
Safety Notes
Personal Safety
Mounting and
Rigging
Power and Wiring
Operation
Expected LED
Lifespan
-2-
Read all the following Safety Notes before working with this product. These notes
include important information about the installation, usage, and maintenance of this
product.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained Chauvet certified
technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
·
·
·
·
·
Avoid direct eye exposure to the light source while the product is on.
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be very hot.
DO NOT operate this product outdoors or in any location where dust, excessive
heat, water, or humidity may affect it. (IP20)
· CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
· Mount this product in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces.
· Make sure there are no flammable materials close to this product while it is
operating.
· When hanging this product, always secure to a fastening device using a safety
cable.
· Always make sure you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product’s specification
label.
· To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
· Never connect this product to a dimmer pack or rheostat.
· Never disconnect this product by pulling or tugging on the power cable.
· Do not operate this product if you see damage on the housing, lenses, or cables.
Have the damaged parts replaced by an authorized technician at once.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· The maximum ambient temperature is 113 °F (45 °C). Do not operate this product
at a higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact
Chauvet Technical Support.
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product and reducing the ambient temperature to
an optimal operating range. In addition, limiting the overall projection intensity may also
help to extend the LEDs’ lifespan.
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Introduction
2. Introduction
Description
Features
COLORdash™ Batten-Quad 12 is a linear wash fixture with 12 individually controllable
quad-color RGBA LEDs that produce any variation of white, as well as richly saturated
colors, due to the inclusion of amber LEDs. It maintains an even pixel pitch when used in
multiples, either stacked in an array using the optional CBB6 bracket or lined up end-toend. Setup is easy when using the hanging bracket, floor trunnions, 3- and 5-pin DMX
connectors, and power linking.
· 4, 6, 10, 48 or 52 quad-color LED wash product
· Operating modes:
· 4-channel: RGBA control
· 6-channel: RGBA, dimmer, strobe
· 10-channel: RGBA, dimmer, strobe, color macro, white balance, auto programs,
dimmer speed, auto speed
· 48-channel: RGBA pixel control
· 52-channel: RGBA pixel control, dimmer, strobe, auto programs, auto speed
· Built-in auto and custom programs via DMX or Master/Slave
· Metal construction for added durability
· Individual pixel control
· Silent flicker-free operation
· Mount multiple units stacked or end-to-end to maintain pixel pitch
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-3-
Introduction
Overview
Front View
Power In
3- and 5-pin DMX
DMX In
In
Power Out
Control Panel
Fuse Holder
3- and 5-pin DMX Out
Rear View
Side View
Floor Trunnion
Hanging Bracket
Adjustment Knob
End Cap View
-4-
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Introduction
Dimensions
3.25 in
82.5 mm
3.25 in
82.5 mm
3.25 in
82.5 mm
2.56 in
65 mm
3.25 in
82.5 mm
2.56 in
65 mm
1.38 in
35 mm
3.25 in
82.5 mm
3.25 in
82.5 mm
3.25 in
82.5 mm
3.25 in
82.5 mm
3.25 in
82.5 mm
41.46 in
1053 mm
40.98 in
1041 mm
38.86 in
987 mm
2.83 in
72 mm
6.36 in 6.46 in
162 mm 164 mm
2.56 in
65 mm
2.83 in
72 mm
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-5-
Setup
3. Setup
Each COLORdash™ Batten-Quad 12 has an auto-ranging power supply that works with
an input voltage range of 100~240 VAC, 50/60 Hz. To determine the power
requirements for each COLORdash™ Batten-Quad 12, refer to the label affixed to the
product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the Chauvet
website: www.chauvetprofessional.com.
AC Power
·
·
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
To eliminate unnecessary wear and improve its lifespan, during periods of nonuse completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug The COLORdash™ Batten-Quad 12 comes with a power input cord terminated with a
Neutrik® powerCON® connector on one end and an Edison plug on the other end (U.S.
market). If the power input cord that came with your product has no plug, or if you need
to change the Edison plug, use the table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
AC Neutral
AC Ground
Black
White
Green/Yellow
Brown
Blue
Green/Yellow
Yellow or Brass
Silver
Green
Fuse Replacement
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
1. Disconnect this product from the power outlet.
2. Using a #2 flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(2 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
-6-
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Setup
Power Linking
The COLORdash™ Batten-Quad 12 supports power linking. You can power link up to 9
products at 120 V, 16 at 208 V, or 17 at 230 V.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
DMX Linking
You can link the COLORdash™ Batten-Quad 12 to a DMX controller using a standard
DMX serial connection. If using other DMX compatible products with the
COLORdash™ Batten-Quad 12, you can control each individually with a single DMX
controller.
DMX Modes The COLORdash™ Batten-Quad 12 uses the standard DMX data connection for the 4,
Master/Slave
Connectivity
6, 10, 48, and 52 channel DMX modes.
· Refer to the Introduction chapter for a brief description of these modes.
· Refer to the Operation chapter to learn how to configure the
COLORdash™ Batten-Quad 12 to work in these modes.
· The DMX Values section provides you with detailed information regarding the
DMX modes.
The Master/Slave mode allows a COLORdash™ Batten-Quad 12 (the “master”) to
control one or more COLORdash™ Batten-Quad 12s (the “slaves”) without a DMX
controller. One COLORdash™ Batten-Quad 12 becomes the master when running an
auto program or by being in Static mode.
You must configure each slave product’s control panel to operate in Slave mode. During
Master/Slave operation, the slave products will operate in unison with the master
product.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The Operation section of this manual provides detailed instructions on how to
configure the Master and Slaves.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX
controller, download the DMX Primer from the Chauvet website:
www.chauvetprofessional.com.
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-7-
Setup
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging Chauvet recommends using the following general guidelines when mounting this
product.
Procedure
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product’s weight. See the Technical Specifications for the weight-bearing
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable.
The COLORdash™ Batten-Quad 12 comes with a hanging bracket and trunnions. The
trunnions also serve as floor supports. You must supply your own mounting clamps.
Make sure the clamps are capable of supporting the weight of this product. Use at least
one mounting point per product.
Mounting Clamp
Safety Cable
Mounting Diagram
Overhead Mounting
Floor Mounting
-8-
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Operation
4. Operation
Control Panel
Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value in to the current function
Navigates upward through the menu list and increases the
numeric value when in a function
Navigates downward through the menu list and decreases the
numeric value when in a function
Control Options
You can set the COLORdash™ Batten-Quad 12 starting address in the 001–512 DMX
range. This enables control of up to 9 products in the 52-channel 52 Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
· To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
· To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
· Press <MENU> repeatedly to exit to the previous main level.
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-9-
Operation
DMX Personality This setting allows you to choose a particular DMX personality.
1. Go to the Channel main level.
2. Select the desired personality (4 Ch, 6 Ch, 10Ch, 48Ch, or 52Ch).
DMX Control
· See the DMX Values section for the highest starting address you can select for
each personality.
· Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the running mode:
a. Go to the M&S Mode main level.
b. Select Slave.
3. Set the starting address:
a. Go to the Address main level.
b. Select the starting address (001–509).
The highest recommended starting address for each DMX mode are as follows:
DMX Mode
4 Ch
6 Ch
10Ch
48Ch
52Ch
DMX Address
509
507
503
465
461
Static Color The Static Color mode allows for permanent RGBA color mixing without a DMX
controller.
1. Go to the Static main level.
2. Select the Fix C.
a. Choose desired color combination.
3. Select the Manu C
a. Select a color: R (red), G (green), B (blue), or A (amber).
b. Select the desired color value (000–255).
c. Repeat for each color.
-10-
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Operation
Auto Programs Auto programs allow for dynamic RGBA color mixing without a DMX controller.
1.
2.
3.
4.
Go to Auto main level.
Select the desired auto (Auto 0–12).
Select Speed.
Choose the desired speed value (000–100).
You cannot edit any of the auto programs (Auto 0–12).
Auto Test This option allows you to test all the LEDs on the COLORdash™ Batten-Quad 12.
1. Go to Info main level.
2. Select Auto > Test.
Master/Slave The Master/Slave mode allows a group of COLORdash™ Batten-Quad 12s (the slaves)
to simultaneously duplicate the output of another COLORdash™ Batten-Quad 12
(the master) without a DMX controller.
1. Set each of the slaves:
a. Go to M&S Mode.
b. Select Slave.
2. Set the master:
a. Go to M&S Mode.
b. Select Master.
c. Select an Auto or Static program as explained in Auto Programs.
· The master is the one that runs a program whether in Auto or Static Color
mode.
· Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master
product.
· The master should be the first product in the daisy chain.
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-11-
Operation
Dimmer Curves This setting determines how fast the output of the COLORdash™ Batten-Quad 12
changes when you modify the values of the red, green, blue, amber, and dimmer faders.
This setting provides four different options to simulate the dimming curve of an
incandescent lighting product.
1. Go to the Dim Mode main level.
2. Select a dimmer curve (OFF, DIM 1, DIM 2, or DIM 3).
OFF:
The output is proportional (linear) to the dimmer and RGBA channel
values.
DIM1–DIM3: The output follows the dimmer and RGBA channel values based on the
corresponding dimmer curve, DIM 1 being the fastest and DIM 3 the
slowest.
Software Information This option shows what version of software the COLORdash™ Batten-Quad 12 is
running.
1. Go to the Info main level.
2. Select Version. (the version number will show on the screen)
Fixture Hours This option shows the total amount of hours the COLORdash™ Batten-Quad 12 has
been turned on.
1. Go to the Info main level.
2. Select FixHours (the hours will show on the screen).
Backlight This setting allows you to set the amount of time the backlight on the COLORdash™
Batten-Quad 12 stays on after the last button is pressed on the control panel.
1. Go to the BackLite main level.
2. Select On, 10S, 20S, or 30S.
3. Press <ENTER>.
White Balance This setting allows you to select the white color shown by the COLORdash™ BattenQuad 12 when the DMX controller’s red, green, and blue faders are set to 255.
1. Go to the White Balance main level.
2. Select a color: R (red), G (green), or B (blue).
3. Select a color value (125–255).
4. Repeat for each color.
When selecting White Balance, you will only be able to define the values of red,
green, and blue.
The values of red, green, and blue configured from White Balance will define the
color temperature shown when the RGB faders are set to 255.
-12-
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Operation
Menu Map
Main Level
Programming Levels
Description
Auto 0–12
Auto programs
Auto
Speed
0–100
Fade
Fade effect in which each color merges to the next
Fix C
Static
R
Red
G
Green
B
Blue
A
Amber
GB
Green/Blue
RB
Red/Blue
RG
Red/Green
RGB
Red/Green/Blue
R A
Red/Amber
GA
Green/Amber
BA
Blue/Amber
RG A
Red/Green/Amber
R BA
Red/Blue/Amber
GBA
Green/Blue/Amber
RGBA
Red/Green/Blue/Amber
R
Manu C
G
Value
B
0–255
Combines red, green, blue, and amber to make a
custom color
A
Dim Mode
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Off
DIM 1–DIM 3
No dimmer
Dimmer curves
-13-
Operation
Menu Map (cont.)
Main Level
Programming Levels
BackLite
10S
Turns off display backlight after 10 sec of inactivity
20S
Turns off display backlight after 20 sec of inactivity
30S
Turns off display backlight after 30 sec of inactivity
On
Display backlight always on
Auto
Info
Description
Test
FixHours
Address
Channel
M&S Mode
Shows total operating hours
Version
Shows installed software version
001–509
Selects DMX address
4 Ch
4-channel: RGBA control
6 Ch
6-channel: RGBA, dimmer, strobe
10Ch
10-channel: RGBA, dimmer, strobe, color macro,
white balance, auto programs, dimmer speed,
auto speed
48Ch
48-channel: RGBA pixel control
52Ch
52-channel: RGBA pixel control, dimmer, strobe,
auto programs, auto speed
Master
DMX mode
Slave
Slave mode
R
White Balance
G
B
-14-
Turns on all LEDs in sequence for testing
Sets red LED maximum value
Value
125–255
Sets green LED maximum value
Sets blue LED maximum value
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Operation
DMX Values
52Ch
Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Function
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
Red 1
Green 1
Blue 1
Amber 1
Red 2
Green 2
Blue 2
Amber 2
Red 3
Green 3
Blue 3
Amber 3
Red 4
Green 4
Blue 4
Amber 4
Red 5
Green 5
Blue 5
Amber 5
Red 6
Green 6
Blue 6
Amber 6
Red 7
Green 7
Blue 7
Amber 7
Red 8
Green 8
Blue 8
Amber 8
Red 9
Green 9
Blue 9
Amber 9
Percent/Setting
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
COLORdash™ Batten-Quad 12 Sections for DMX Control
1
2
3
4
COLORdash™ Batten-Quad 12 User Manual Rev. 4
5
6
7
8
9
10
11
12
-15-
Operation
DMX Values (cont.)
52Ch
(cont.)
48Ch
Channel
37
38
39
40
41
42
43
44
45
46
47
48
Red 10
Green 10
Blue 10
Amber 10
Red 11
Green 11
Blue 11
Amber 11
Red 12
Green 12
Blue 12
Amber 12
49
Auto Programs
50
51
Auto Speed
Dimmer
52
Strobe
Channel
1
2
3
4
5
6
7
8
9
10
11
12
-16-
Function
Function
Red 1
Green 1
Blue 1
Amber 1
Red 2
Green 2
Blue 2
Amber 2
Red 3
Green 3
Blue 3
Amber 3
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 190
191 ó 210
211 ó 230
231 ó 250
251 ó 255
000 ó 255
000 ó 255
000 ó 010
011 ó 255
Percent/Setting
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Auto 11
Auto 12
Auto 1–12
Slow to fast
0–100%
No function
Slow to fast
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
Percent/Setting
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Operation
DMX Values (cont.)
48Ch
(cont.)
Channel
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Function
Red 4
Green 4
Blue 4
Amber 4
Red 5
Green 5
Blue 5
Amber 5
Red 6
Green 6
Blue 6
Amber 6
Red 7
Green 7
Blue 7
Amber 7
Red 8
Green 8
Blue 8
Amber 8
Red 9
Green 9
Blue 9
Amber 9
Red 10
Green 10
Blue 10
Amber 10
Red 11
Green 11
Blue 11
Amber 11
Red 12
Green 12
Blue 12
Amber 12
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
Percent/Setting
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
-17-
Operation
DMX Values (cont.)
10Ch
-18-
Channel
Function
1
2
3
4
5
Dimmer
Red
Green
Blue
Amber
6
Strobe
7
Color Macro + White
Balance
8
Auto Programs
9
Auto Speed
10
Dimmer Speed
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 010
011 ó 255
000 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 200
201 ó 205
206 ó 210
211 ó 215
216 ó 220
221 ó 225
226 ó 230
231 ó 235
236 ó 240
241 ó 245
246 ó 250
251 ó 255
000 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 190
191 ó 210
211 ó 230
231 ó 250
251 ó 255
000 ó 255
000 ó 051
052 ó 101
102 ó 152
153 ó 203
204 ó 255
Percent/Setting
0–100%
0–100%
0–100%
0–100%
0–100%
No function
Slow to fast
No function
R: 100%
G: 0–100%
B: 0
R: 100%–0
G: 100%
B: 0
R: 0
G: 100%
B: 0–100%
R: 0
G: 100%–0
B: 100%
R: 0–100%
G: 0
B: 100%
R: 100%
G: 0
B: 100%–0
R: 100%
G: 0–100%
B: 0–100%
R: 100%–0
G: 100%–0
B: 100%
RGBA: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10
White 11
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Auto 11
Auto 12
Auto 1–12
Slow to fast
Preset dimmer speed from display menu
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Operation
DMX Values (cont.)
6 Ch
4 Ch
Channel
Function
1
2
3
4
5
Dimmer
Red
Green
Blue
Amber
6
Strobe
Channel
1
2
3
4
Function
Red
Green
Blue
Amber
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 010
011 ó 255
Percent/Setting
0–100%
0–100%
0–100%
0–100%
0–100%
No Function
Slow to Fast
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
Percent/Setting
0–100%
0–100%
0–100%
0–100%
-19-
Technical Information
5. Technical Information
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Returns
You must send the product prepaid, in the original box, and with the original packing and
accessories. Chauvet will not issue call tags.
Call Chauvet and request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number, serial number, and a
brief description of the cause(s) for the return.
Clearly label the package with an RMA number. Chauvet will refuse any product
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Once you have received the RMA number, include the following information on a piece
of paper inside the box:
· Your name
· Your address
· Your phone number
· RMA number
· A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double-boxing are
recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).
-20-
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Technical Specification
Technical Specifications
Dimensions and
Weight
Length
Width
Height
Weight
41 in (1041 mm)
3.2 in (82 mm)
6.5 in (164 mm)
10.6 lb (4.8 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Light Source
Photometrics
Thermal
DMX
Ordering
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
Operating
Power linking current
Fuse
175 W
1.45 A
13.6 A (9 products)
2 A, 250 V
175 W
0.76 A
13.6 A (17 products)
2 A, 250 V
Power I/O
U.S./Worldwide
Europe
Power input connector
Power output connector
Power cord plug
Neutrik® powerCON® A
Neutrik® powerCON® B
Edison (U.S.)
Neutrik® powerCON® A
Neutrik® powerCON® B
Local plug
Type
Power
Lifespan
LED
7W
50,000 hours
Color
Quantity
Current
Quad-color (RGBA)
12
500 mA
Parameter
Standard 20º Optics
Illuminance @ 5 m
Beam angle
Field angle
539 lx
22°
31°
Max. External Temperature
Cooling System
113 °F (45 °C)
Convection
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
4, 6, 10, 48 or 52
Product Name
Item Code
UPC Number
COLORdash™ Batten-Quad 12
03030714
781462210625
COLORdash™ Batten-Quad 12 User Manual Rev. 4
-21-
User Manual
Contact Us
WORLD HEADQUARTERS - Chauvet
General Information
Technical Support
Address: 5200 NW 108th Avenue
Voice: (954) 577-4455 (Press 4)
Sunrise, FL 33351
Fax:
(954) 756-8015
Voice:
(954) 577-4455
Email: tech@chauvetlighting.com
Fax:
(954) 929-5560
World Wide Web www.chauvetlighting.com
Toll free: (800) 762-1084
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information
Technical Support
Address: Unit 1C
Email: uktech@chauvetlighting.com
Brookhill Road Industrial Estate
World Wide Web www.chauvetlighting.co.uk
Pinxton, Nottingham, UK
NG16 6NT
Voice:
+44 (0)1773 511115
Fax:
+44 (0)1773 511110
MEXICO - Chauvet Mexico
General Information
Technical Support
Address: Av. Santa Ana 30
Email: servicio@chauvet.com.mx
Parque Industrial Lerma
World Wide Web www.chauvet.com.mx
Lerma, Mexico C.P. 52000
Voice:
+52 (728) 285-5000
CHAUVET EUROPE - Chauvet Europe BVBA
General Information
Technical Support
Address: Stokstraat 18
Email: Eutech@chauvetlighting.eu
9770 Kruishoutem
World Wide Web www.chauvetlighting.eu
Belgium
Voice:
+32 9 388 93 97
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record.
Follow their instructions to request support or to return a product. Visit our website for contact
details.
COLORdash™ Batten-Quad 12 User Manual Rev. 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising