DSM2 Receiver Specifications with Satellite

DSM2 Receiver Specifications with Satellite
iRangeX RM601 DSM2/DSMX MICRO Receiver
Specifications:
Name: RM601
Channel: 6Channel+ PPM Port
Modulation: DSM2/DSMX
Band: 2.4GHz
Dimensions (W x Lx H): 38 x 20x5 mm
Weight: 4g
Voltage Range: 4-10v
Brown-Out Voltage: 4.0v (Always supply power above this voltage)
Antenna Length Main RX: 13.5cm (2)
Remote Control Range: 1200m-1500m (tested with JR DSX9)
Features
6 channels with PPM Out
Servo Sync (feature does not work with module systems)
Preset failsafe system
Quick Connect
Compatibility (Spectrum and JR DSM2 /DSMX): DX6I,DX7,DX8, DSX7,DSX9 DSX11
High Working Voltage: 3.3- 10v
Control range up to 1.5KM
Binding Procedure
I. Put the binding harness into connector location marked BIND. Next connect power to
receiver. Receiver LED should illuminate it means bind is accomplished
II. To set fail-safe throttle and control surface positions, (minimum throttle and all control
surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED
will illuminate), Turn on the transmitter.
III. Receiver LED will change from rapid flashing to slow flashing and a few seconds
later when bind is accomplished the LED of receiver will illuminate solid. Failsafe should
be programmed correctly .
IV. Remove binding harness from the BIND channel. Restart the receiver by cycling it
power off and turn on and connect battery into BIND channel is recommended. All
channels should function properly now. You may test fail-safe by holding sticks in
corner, cycle transmitter on and off. Surfaces and throttle should return to your preset
fail-safe positions.
Notes:
1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X
product. The Spektrum and DSM2/X brand is a trademark of Horizon Hobbies USA.
2) This is not an underground black market fake Spektrum product.
3) Only one time bind procedure is required on a new receiver. Repetitive binding
provides no extra security. Always remember to remove the binding harness after
successful bind is completed.
Package including:
RM601 Receiver *1
Bind Harness*1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising