SD 2500 SD 4500

SD 2500 SD 4500
SD 2500
SD 4500
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
Contents
1
1.1
1.2
Information about the documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1.2.1
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1.2.3
Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Explanation of symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2
1.3
2
2.1
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General power tool safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
2.1.3
Additional safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drill/driver safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1
5.3
6
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
5.1.1
Repositioning the universal hook
6
5.1.3
Forward / reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Types of work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
5.3.2
8
Preparations at the workplace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working safely with the universal hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the accessory tool.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.1
Driving screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.3
Switching on in sustained operating mode
5.3.5
Removing screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching off after sustained operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screwdriver / depth gauge interface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care of the product
8
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
6
6
6.1
7
5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.4
6
4
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1.2
5.2
4
5
Items supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
2
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
4.1
2
2
2.1.1
Overview of the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
2
2
3.1
3.2
1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.2
3
1
About this documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manufacturer’s warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
7
7
8
8
8
8
9
9
9
10
10
1 Information about the documentation
1.1 About this documentation
•
•
•
Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
Observe the safety instructions and warnings in this documentation and on the product.
Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used in combination with a symbol:
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
1
DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING! Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead to slight personal
injury or damage to the equipment or other property.
1.2.2 Symbols
The following symbols are used:
Draws attention to instructions or other useful information.
Read the operating instructions before use
Rated speed under no load
Revolutions per minute
Direct current (DC)
1.2.3 Illustrations
The illustrations in these operating instructions are intended to convey a basic understanding and may differ
from the actual version of the product:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions.
The numbering in the illustrations reflects the order of the work steps in the illustration and may
deviate from the numbering of work steps in the text.
Item reference numbers are used in the overview illustration. In the product overview section, the
numbers shown in the legend relate to these item reference numbers.
1.3 Product information
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product and its ancillary equipment may present hazards when used incorrectly by
untrained personnel or when used not as directed.
•
▶
Make a note of the designation and serial number printed on the identification plate in the following table.
Always quote this information when you contact a Hilti representative or Hilti Service to enquire about
the product.
Product information
Type:
Generation:
Serial number:
SD 6000
SD 5000
SD 4500
SD 2500
01
2 Safety
2.1 Safety instructions
The safety rules given in the following section contain all general safety rules for electric tools which, in
accordance with the applicable standards, require to be listed in the operating instructions. Accordingly,
some of the rules listed may not be relevant to this tool.
2
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
2.1.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
Electrical safety
▶ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
▶ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
▶ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
▶ If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
▶ Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
▶ Prevent unintentional starting. Ensure the switch is in the off‐position before connecting to power
source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on
the switch or energising power tools that have the switch on invites accidents.
▶ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
▶ Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
▶ Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
▶ Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
▶ Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
▶ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
3
▶
▶
▶
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
2.1.2 Drill/driver safety warnings
2.1.3 Additional safety instructions
Personal safety
▶ Use the product only when it is in technically faultless condition.
▶ Never tamper with or modify the tool in any way.
▶ Apply appropriate safety measures at the opposite side of the workpiece in work that involves breaking
through. Parts breaking away could fall out and / or fall down causing injury to other persons.
▶ Always hold the power tool with both hands on the grips provided. Keep the grips clean and dry.
▶ Always grip the side handle at its outermost end. When drilling and screwdriving, the grip of the power
tool may be deflected laterally (the power tool tends to pivot about its own axis).
▶ Avoid touching rotating parts – risk of injury!
▶ Wear suitable protective glasses, a hard hat, ear protection, protective gloves and light respiratory
protection while using the tool.
▶ Always activate the safety lock before changing accessory tools, before storing the electric tool or before
transporting it.
▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a
risk of injury (cuts or burns).
▶ Wear eye protection. Flying fragments present a risk of injury to the body and eyes.
▶ Before beginning the work, check the hazard classification of the dust that will be produced. Use an
industrial vacuum cleaner with an officially approved protection classification in compliance with locally
applicable dust protection regulations.
▶ Use a dust removal system and suitable vacuum cleaner whenever possible. Dust from materials, such
as paint containing lead, some wood species, concrete/masonry/stone containing silica, and minerals as
well as metal, may be harmful.
▶ Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate for
the type of dust generated. Contact with or inhalation of the dust may cause allergic reactions and/or
respiratory or other diseases to the operator or bystanders. Certain kinds of dust are classified as
carcinogenic such as oak and beech dust, especially in conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing asbestos may be handled only by specialists.
▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may give you an electric shock if you damage an electric cable
accidentally.
Careful handling and use of power tools
▶ Secure the workpiece. A workpiece clamped in a vice or secured by some other clamping device is more
secure than when held only by hand.
▶ Switch the power tool off if the accessory tool sticks and stalls. The power tool may be deflected laterally.
▶ Wait until the power tool stops completely before you lay it down.
4
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
3 Description
3.1 Overview of the product
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
5
@
;
=
%
&
(
)
Chuck
Power tool / accessory interface (snap-on
connection)
Universal hook
Motor cooling air intake
Grip
Air exit
Forward / reverse selector switch with
safety lock
+
§
/
:
∙
$
Control switch (with electronic speed
control)
Lockbutton for continuous operation
Belt hook
Charge state and fault display (Li-ion
battery)
Battery release buttons
Depth gauge
3.2 Intended use
The product described is a hand-held mains-powered electric tool for use in drywall installation.
The power tool is designed for driving and removing screws in drywall installation work. Drywall screws with
a length of up to 55 mm and a diameter of up to 4.2 mm can be used.
Working with materials hazardous to health (e.g. asbestos) is not permissible.
3.3 Items supplied
Drywall screwdriver, operating instructions
Note
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.com.
4 Technical data
4.1 Technical data
Rated current input
Weight
Rated speed under no
load
Max. torque
Socket/bit drive
SD 4500
SD 2500
1.4 kg
(3.1 lb)
1.4 kg
(3.1 lb)
6.5 A
0 /min …4,500 /min
(0 Hz …75.0 Hz)
9.5 Nm
(7.0 ftlbf)
Hex socket 1/4"
6.5 A
0 /min …4,500 /min
(0 Hz …75.0 Hz)
9.5 Nm
(7.0 ftlbf)
Hex socket 1/4"
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Repositioning the universal hook
1.
2.
3.
4.
6
Press both battery release buttons simultaneously and pull the battery out of the screwdriver.
Release the two screws securing the universal hook.
Reposition the universal hook and threaded block on the opposite side of the tool.
Reinsert and tighten the two retaining screws.
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
5.1.2 Working safely with the universal hook
▶
▶
Before beginning the work, make sure that the universal hook is securely attached to the screwdriver.
Use the universal hook only when necessary. Lay the screwdriver down in a safe place when it is not in
use for a long period.
5.1.3 Forward / reverse
Note
The control switch is locked when the forward / reverse switch is in the middle position (safety lock).
▶
Set the forward / reverse selector switch to forward or reverse rotation.
5.2 Changing the accessory tool.
1. Pull the depth gauge away from the power tool, releasing the snap-on connection.
2. Push the chuck towards the screwdriver, turning the chuck slightly at the same time, and then hold it in
this position.
3. Remove the accessory tool with your other hand.
4. Insert the desired accessory tool in the chuck, pushing it into the screwdriver as far as it will go.
5.3 Types of work
Observe the safety instructions and warnings in this documentation and on the product.
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
7
5.3.1 Driving screws
WARNING
Electrical hazards There is a risk of electric shock if a screw is driven into a concealed electric cable
and, at the same time, the bit holder or depth gauge is touched.
▶
1.
2.
3.
4.
Hold the screwdriver only by the grip when driving or removing screws.
Set the screwdriver to forward rotation.
Check that the battery is in the working position.
Position the screw on the bit and bring the tip of the screw into contact with the working surface.
Use the control switch to regulate the speed of the screwdriver.
5.3.2 Removing screws
1.
2.
3.
4.
Pull the depth gauge off.
Set the screwdriver to reverse rotation.
Insert the bit in the head of the screw and use the control switch to regulate the speed of the screwdriver.
Refit the depth gauge after removing the screws.
5.3.3 Switching on in sustained operating mode
▶
Switch on in sustained operating mode.
5.3.4 Switching off after sustained operation
▶
Press the control switch.
◁ The lockbutton returns to its original position.
5.3.5 Screwdriver / depth gauge interface
1. Pull the depth gauge away from the power tool, releasing the snap-on connection.
2. Pull the depth gauge forward, away from the power tool.
Note
With the drive spindle exposed in this way, the following operations can be carried out:
Removing screws (set to reverse rotation),
changing bits,
changing bit holders,
changing to magazine operation,
redriving screws.
8
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
6 Care and maintenance
6.1 Care of the product
WARNING
Electrical hazards! Improper repairs to electrical parts may lead to serious injuries.
▶
Electrical parts may be repaired only by trained electrical specialists.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
▶
▶
▶
▶
Keep the screwdriver, especially its grip surfaces, clean and free from oil and grease. Do not use cleaning
agents containing silicone.
Never operate the product when the air vents are blocked. Clean the air vents carefully using a dry brush.
Do not permit foreign objects to enter the interior of the screwdriver.
Clean the outer surfaces of the power tool with a damp cloth at regular intervals.
Do not use a spray, pressure jet washer or running water for cleaning. This may negatively affect the
electrical safety of the screwdriver.
7 Troubleshooting
Note
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem
by yourself, please contact Hilti Service.
Trouble or fault
The screwdriver doesn’t work
and all four LEDs blink.
The control switch can’t be
pressed, i.e. the switch is
locked.
The screwdriver runs but the
screw can’t be driven.
Possible cause
The overload cut-out has been
activated.
Action to be taken
▶
The safety lock is engaged.
▶
The wrong direction of rotation is
set.
▶
The screwdriver or the battery Electrical fault.
gets very hot.
▶
The screwdriver has been over▶
loaded by exceeding its application
limits.
Release the control switch and
then press it again. Reduce the
load on the tool.
Set the forward / reverse
selector switch to forward or
reverse rotation.
Use the forward / reverse
selector switch to set the right
direction of rotation.
Switch the screwdriver off
immediately, remove the battery
and contact Hilti Service.
Select a screwdriver with
adequate performance for the
application.
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
9
8 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶
▶
▶
Improper disposal of the equipment may have the following consequences: The burning of plastic
components generates toxic fumes which may present a health hazard. Batteries may explode
if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution. Careless disposal may permit unauthorized and improper use of the
equipment. This may result in serious personal injury, injury to third parties and pollution of the
environment.
Dispose of defective batteries right away. Keep them out of reach of children. Do not disassemble
or incinerate the batteries.
Batteries that have reached the end of their life must be disposed of in accordance with national
regulations or returned to Hilti.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
9 Manufacturer’s warranty
Please contact your local Hilti representative if you have questions about the warranty conditions.
▶
10
English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
Hilti = registered trademark of Hilti Corp., Schaan
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
01
**
20161026
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising