fitting BAttERiES gEnERAL CARE DiSPOSAL fitting BAttERiES

fitting BAttERiES gEnERAL CARE DiSPOSAL fitting BAttERiES
f ittin g B A TTE R I E S
Remove the battery cover using the
finger clip. Fit the x2 AA batteries in the
underside of the unit, ensuring that the
+/- symbols match the diagram inside the
unit. Re-fit the battery cover.
NOTE: Do
batteries.
not
use
rechargeable
G EN ER A L C A R E
• The acetone/non acetone solution can be stored in the Pot
for future use. Ensure the Pot Lid is screwed on tightly.
• Dispose of acetone solution with care. • There are no user serviceable parts inside the unit.
• The unit may be cleaned by wiping with a damp cloth.
DO NOT use solvents or detergents or soak in water.
• If the unit is left unused for a long period, remove the
batteries and acetone from the Pot.
d isposal
Electrical and electronic waste is the fastest
growing waste stream in the UK. Around 1.8
million tonnes are generated every year. The Waste
of Electrical and Electronic Equipment (WEEE)
Directive (2002/96/EC) has been put in place to
recycle products using best available recovery and recycling
techniques to minimise the impact on the environment, treat
any hazardous substances and avoid the increasing landfill.
The product is classed as Electrical or Electronic equipment
so please ensure that at the end of the life of this product it
is disposed of in the correct manner in accordance with local
authority requirements, or, returned to The Dezac Group
Ltd., Cheltenham, PO Box 54, GL14 2WW, UK. It must NOT
be disposed of with household waste.
f ittin g B A TTE R I E S
Remove the battery cover using the
finger clip. Fit the x2 AA batteries in the
underside of the unit, ensuring that the
+/- symbols match the diagram inside the
unit. Re-fit the battery cover.
NOTE: Do
batteries.
not
use
rechargeable
G EN ER A L C A R E
• The acetone/non acetone solution can be stored in the Pot
for future use. Ensure the Pot Lid is screwed on tightly.
• Dispose of acetone solution with care. • There are no user serviceable parts inside the unit.
• The unit may be cleaned by wiping with a damp cloth.
DO NOT use solvents or detergents or soak in water.
• If the unit is left unused for a long period, remove the
batteries and acetone from the Pot.
The Dezac Group
Ltd., Cheltenham, PO Box 54, GL14 2WW, UK. It must NOT
be disposed of with household waste.
Ingredients
ACETONE SOLUTION: Acetone, Aqua, Ricinus Communis Oil, Isopropyl Palmitate,
Polysorbate 80, Oleyl Alcohol, Cetyl Acetate, Alcohol Denat., Acetylated Lanolin
Alcohol, Butyl Acetate, Denatonium Benzoate, +/- CI 61565, CI 47000, ci 60725
Rio, Dezac and Rapid Polish Remover are trademarks of The Dezac
Group Ltd © The Dezac Group Ltd 2008, PO Box 17,
Cheltenham Spa, England GL53 7ET
www.riobeauty.com
1-IN-NARR-UK/1.2
Ingredients
ACETONE SOLUTION: Acetone, Aqua, Ricinus Communis Oil, Isopropyl Palmitate,
Polysorbate 80, Oleyl Alcohol, Cetyl Acetate, Alcohol Denat., Acetylated Lanolin
Alcohol, Butyl Acetate, Denatonium Benzoate, +/- CI 61565, CI 47000, ci 60725
Rio, Dezac and Rapid Polish Remover are trademarks of The Dezac
Group Ltd © The Dezac Group Ltd 2008, PO Box 17,
Cheltenham Spa, England GL53 7ET
www.riobeauty.com
1-IN-NARR-UK/1.2
®
RAPID
POLISH
REMOVER
™
Pot Lid
Rotating
Brushes
Pot
Motor
(under pot)
ON/OFF Switch
(HI/LO speed)
Batteries
(underside)
user guide
®
RAPID
POLISH
REMOVER
™
Pot Lid
Rotating
Brushes
Pot
Motor
(under pot)
ON/OFF Switch
(HI/LO speed)
Batteries
(underside)
user guide
P reca u t i o n s
• Read all instructions thoroughly and retain for future
reference.
• Do not use this product if you have any open cuts on or
around the cuticles or fungal nail infections.
ACETONE SOLUTION:
• Highly flammable. Keep from naked flame, polished
surfaces and synthetic materials.
• Not to be taken internally.
!
• Irritant to eyes. If acetone solution gets into eyes, rinse
thoroughly with water.
• Keep out of reach of children.
• Not for use by children under 14.
re m ov i n g pol i sh
1
STEP 1
Align the square recess on the underside
of the pot with the motor and push down
to fix in place.
2
STEP 2
Unscrew the pot lid and pour enough
acetone solution in to cover the rotating
brushes.
NOTE: Use a non-acetone based
solution to remove polish from false nails
as acetone will melt the nail tip.
P reca u t i o n s
• Read all instructions thoroughly and retain for future
reference.
• Do not use this product if you have any open cuts on or
around the cuticles or fungal nail infections.
ACETONE SOLUTION:
• Highly flammable. Keep from naked flame, polished
surfaces and synthetic materials.
• Not to be taken internally.
!
• Irritant to eyes. If acetone solution gets into eyes, rinse
thoroughly with water.
• Keep out of reach of children.
• Not for use by children under 14.
re m ov i n g pol i sh
1
STEP 1
Align the square recess on the underside
of the pot with the motor and push down
to fix in place.
2
STEP 2
Unscrew the pot lid and pour enough
acetone solution in to cover the rotating
brushes.
NOTE: Use a non-acetone based
solution to remove polish from false nails
as acetone will melt the nail tip.
re m ov i n g pol i sh
3
STEP 3
Push the switch up. On the first click, LO
speed is selected. To select HI
speed, push the switch fully
up.
4
STEP 4
Insert a nail with nail polish into the pot,
applying gentle pressure on the rotating
brushes.
5
STEP 5
After use, push the switch fully down and
screw the pot lid back on.
6
STEP 6
Wash hands and nails well with warm
soapy water to remove all traces of
remover solution. Massage a good
moisturiser into your hands, nails and
cuticle areas.
re m ov i n g pol i sh
3
STEP 3
Push the switch up. On the first click, LO
speed is selected. To select HI
speed, push the switch fully
up.
4
STEP 4
Insert a nail with nail polish into the pot,
applying gentle pressure on the rotating
brushes.
5
STEP 5
After use, push the switch fully down and
screw the pot lid back on.
6
STEP 6
Wash hands and nails well with warm
soapy water to remove all traces of
remover solution. Massage a good
moisturiser into your hands, nails and
cuticle areas.
remov in g n a i l e x t e n s i o n s
1
STEP 1
Cut false nails down.
2
STEP 2
Filing over the whole extension exposes
the surface and speeds up removal.
NOTE: If removing UV Gel nails you will
need to completely file down the layers
of gel before using the unit to remove the
tip and glue.
3
STEP 3
Fully submerge the nail in acetone
solution. Soak for 5–10 minutes before
checking if the extension is softening.
NOTE: Each time you lift your nails from
the solution the nails start to harden again,
so try to keep your nails submerged as
much as possible.
4
STEP 4
After removing nails, wash hands
thoroughly to remove all traces of
acetone. Massage a good moisturiser
into your hands, nails and cuticle areas.
remov in g n a i l e x t e n s i o n s
1
STEP 1
Cut false nails down.
2
STEP 2
Filing over the whole extension exposes
the surface and speeds up removal.
NOTE: If removing UV Gel nails you will
need to completely file down the layers
of gel before using the unit to remove the
tip and glue.
3
STEP 3
Fully submerge the nail in acetone
solution. Soak for 5–10 minutes before
checking if the extension is softening.
NOTE: Each time you lift your nails from
the solution the nails start to harden again,
so try to keep your nails submerged as
much as possible.
4
STEP 4
After removing nails, wash hands
thoroughly to remove all traces of
acetone. Massage a good moisturiser
into your hands, nails and cuticle areas.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising