Product Manual
92503004845revB
THE ORIGINAL SINCE 1967.
Slash
SW95 SLASH Cry Baby WAH WAH
®
POWER
SETUP INSTRUCTIONS
The SW95 Slash Cry Baby® Wah Wah is
powered by two 9-volt batteries (accessed
via the top of the pedal), an AC adapter
such as the Dunlop ECB004/ECB004E,
or a DC Brick™ power supply.
•Run an instrument cable from your
guitar to the SW95’s INSTRUMENT
jack and another instrument cable
from the SW95’s AMPLIFIER jack
into your amplifier’s input.
CONTROLS
•Set VOLUME and GAIN controls to
their 12 o’clock positions.
•VOLUME knob controls overall
effect volume
•GAIN knob controls overall amount
of distortion
•DISTORTION switch toggles distortion
effect on/off (red LED indicates on)
•FOOTSWITCH toggles pedal on/off
(blue LED indicates on)
SPECIFICATIONS
•Rock your foot back and forth on the
pedal to hear the vocal, expressive tones
that the Cry Baby is famous for.
Impedance
Input
Output
•Rotate the GAIN control clockwise to
increase amount of distortion or counterclockwise to decrease it.
Nominal Input
Max Output
Noise Floor*
Convenient Top L oading
Battery Door
•Push the toe of the pedal down until you
feel a “click” to turn the pedal on/off.
•Rotate the VOLUME control clockwise to
increase volume or counterclockwise to
decrease it.
•To engage the SW95’s distortion circuit,
push in the red DISTORTION switch.
DISTORTION CIRCUIT
on/off Switch with LED
indicator
VOLUME KNOB
GAIN KNOB
1 MΩ
4.7 kΩ
-8 dBV
+7 dBV
< -94 dBV
Center Freq. (fc)
Heel Down
Toe Down
270 Hz to 370 Hz
1.5 kHz to 1.9 kHz
Max Gain at fc Bypass
Current Draw
Power Supply
20 dB
True Hardwire
18 mA
18 volts DC
*A-weighted, distortion off.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising