Conventional Pull Stations PS-SA and PS-DA Agency Listings The PS-DA and PS-SA Pull Stations are manual pull stations which provide a Fire Alarm Control Panel (FACP) with a single alarm initiating input signal. The PS-DA is a dual-action model. The PS-SA is a single-action model. Both the PS-DA and the PSSA are equipped with key lock / reset. Both are designed to meet multiple applications with the installer and end-user in mind. Its innovative design, durable construction, and multiple mounting options make the PS-DA and PS-SA simple to install, maintain, and operate. The single-action pull-station is activated by a single pull-down of the alarm handle. The dual-action versions require pushing in the handle, then pulling the handle down for activation. The PS-DA and PS-SA manual pull stations are UL listed and meet the ADA requirement of a 5-lbs. maximum pull force to activate. Operating instructions are molded into the handle along with Braille text. Molded terminal numbers can be found adjacent to the wiring terminals. Models: PS-SA– Single action with ‘pigtail’ connections and a key lock reset. Pigtail wires are provided for connection to the Fire Alarm Control Panel’s (FACP) initiation circuit. PS-DA – Dual action model with screw terminal connections and a key lock reset. PS-DAH - Same as PS-DA except with hex lock reset. PS-DALOB- Same as PS-DA except with “outdoor use” listing. Includes SB-I/O backbox with sealing gasket. PS-DASP – Same as PS-DA except with both English and Spanish operating instructions. Features: • • • • • • • • • • UL Listed CSFM Listed Meets ADA requirements Operating instructions are molded into the handle along with Braille text. Made of durable Lexan Available in Spanish Key resettable Easy to Install, maintain and operate Single or dual action Surface mount box available Specification: Dimensions: Height: 5-1/2” (13.97 cm) Width: 4” (10.16 cm) Depth: 1-7/16” (3.65 cm) Operatingtemperature: 32°F to 120°F (0°C to 49°C) Electrical: Switch Contact Rating: 0.25 A @ 30 VAC or VDC Accessories: SB-I/0 Surface Mount Back-box BG-TR Trim Ring P/N 350250 Rev D Copyright © 2011 Honeywell International Inc. PS-DA PS-DA PS-SA Rear PS-DASP PS-DA Rear PS-SA This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Silent Knight 12 Clintonville Road Northford, CT 06472-1610 Phone: (800) 328-0103, Fax: (203) 484-7118. www.farenhyt.com Made in the U.S.A.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project