DW-VAONE32 Series-Quick Start Guide

DW-VAONE32 Series-Quick Start Guide
All-in-One DVR
Quick Start Guide
Quick Start Guide
Step 2 – POWERING UP THE DVR
NOTE: VMAX A1 is a Universal HD DVR that Records all HD Analog Formats and All Analog to 960H
(1080p via Coax) resolutions.
All-in-One HD DVR records 1080p HD Analog, TVI, CVI and all analog to 960H
32 Channel Models
DW-VAONE324T - 4TB Internal Storage
DW-VAONE3216T - 16TB Internal Storage
DW-VAONE328T - 8TB Internal Storage
DW-VAONE3224T - 24TB Internal Storage
DW-VAONE3212T - 12TB Internal Storage
DW-VAONE3232T - 32TB Internal Storage
1. When the DVR boots up, it will be in protective
mode. This means you will not be able to access
the DVR’s setup menu until you enter the proper
username and password.
Step 1 – CONNECTING THE DVR
1. Mount and install all necessary cameras and external devices. Refer to their individual manuals for
additional information.
2. To unlock the DVR, right-click anywhere on the
screen. The login screen will appear. (Default
Username / Password: admin / no password)
2.
3. Connect all necessary cables to the DVR
3.
4. Once all additional devices have been properly connected to the DVR, connect the DVR to
an appropriate power supply. The DVR will boot up automatically.
will be guided through the Startup Wizard.
AUDIO IN/OUT
Username: admin
ALARM
INPUT/OUTPUT
Password: no password
WHAT’S IN THE BOX
ALARM IN
Quick Start Guide
1
2
3
4
5
6
7
8
ALARM OUT
PTZ
KBD
VGA
All-in-One HD DVR records 1080p HD Analog, TVI, CVI and all analog to 960H
32 Channel Models
DW-VAONE324T - 4TB Internal Storage
Quick Start Guide
DW-VAONE3216T - 16TB Internal Storage
DW-VAONE328T - 8TB Internal Storage
DW-VAONE3224T - 24TB Internal Storage
DW-VAONE3212T - 12TB Internal Storage
DW-VAONE3232T - 32TB Internal Storage
Username: admin
Password: no password
WHAT’S IN THE BOX
1
Screws
IR Remote Control
(Optional)
1
12V DC Adaptor
USB Mouse
1
Quick Start Guide
1 Set
1
Screws
1 Set
1 2 3 4 G 5 6 7 8 G 9 10 11 12 G 13 14 15 16 G
C1NC1 NO1 C2 NC2 NO2
+
-
+ -
1
SPOT OUT
NOTE: Download All Your Support Materials and Tools in One Place
1. Go to: http://www.digital-watchdog.com/support-download/
2. Search your product by entering the part number in the Search
‘
by Product’ search bar. Results for
applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides (QSG), software and
Attention: This document is intended to serve as a quick reference page for initial set-up.
It is recommended that the user read the entire instruction manual for complete and proper DVR usage.
Tel: 866-446-3595 / 813-888-9555
digital-watchdog.com
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
POWER SUPPLY
IR Remote Control
(Optional)
1
USB Mouse
1
1
12V DC Adaptor
12V
9A
(MAX 12V)
POWER
NOTE: Download All Your Support Materials and Tools in One Place
1. Go to: http://www.digital-watchdog.com/support-download/
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for
applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides (QSG), software and
Attention: This document is intended to serve as a quick reference page for initial set-up.
It is recommended that the user read the entire instruction manual for complete and proper DVR usage.
Tel: 866-446-3595 / 813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
CH17
CH18
CH19
CH20
CH21
CH22
CH23
CH24
CH25
CH26
CH27
CH28
CH29
CH30
CH31
CH32
HD OUTPUT
USB 3.0
SAFETY TIPS
1. Make sure the cameras and the monitors are properly connected to the DVR.
2. The DVR should be placed in a dust and moisture free environment. It must never be directly exposed
to sunlight. Server room temperature is highly recommended to reduce the chance of overheating,
which may cause the DVR to become unstable.
3. During the boot up process, the DVR should not be interrupted by pressing any buttons on the mouse.
Do not unplug the power adapter or turn the DVR off during the boot up process.
4. A UPS (Uninterrupted Power Supply) is highly recommended to prevent damage to the DVR during a
power outage.
HD
TRUE
ANALOG CAMERA
UNIVERSAL
HD OUTPUT
HD CAMERA
USB MOUSE
NETWORK
PORT
SPOT
VGA
SPOT
MONITOR
VGA
MONITOR
PTZ CAMERA
CONTROL
All-in-One DVR
Step 3 – STARTUP WIZARD
1. Follow the startup wizard’s instructions to setup the DVR’s basic settings, including date and time
setup, network setup and quick recording setup. At any time you can exit the wizard and setup the DVR
a. Click on the pencil icon next to the Date/Time to enter edit mode.
b. Select the proper display format from the [DATE/TIME FORMAT] drop down lists.
c. Select the appropriate date and local time in the [DATE/TIME] section.
d. Select the appropriate time zone from the [TIME ZONE] drop down list.
e. If applicable, enable Daylight Savings mode.
Quick Start Guide
3. The Quick Setup menu option allows you to easily setup
all your cameras’ recording resolution, frame rate, mode
and recording periods. To use the Quick Setup option,
check the box ‘Use Quick Setup’ to enable. There are two
a. Input Desired Days – Enter the number of days you
wish to record before the local storage gets full or
overrides itself. The recording parameters under
Recording settings will adjust automatically to allow
for your desired number of recording days.
b. Record Settings – Manually enter the resolution, frame
rate, recording mode and quality from the drop-down options. The system will instantly update the
‘Days to Record’ section, showing how many estimated recording days will result from the settings
set above. These recording settings will apply to all cameras registered with the DVR. To manually
setup different recordings for each camera or recording schedule, disable the Quick Setup menu
and go to the RECORD setup menu.
Step 5 – REMOTE MONITORING
DDNS Setup
The DDNS address provides your DVR a URL address, easier to remember than an IP address.
This is a free feature supported by Digital Watchdog for its customers.
1. Go to the Network setup menu, and select the ‘DDNS’ tab.
2. Check USE DDNS to enable. (Make sure the DVR’s web port has been properly setup in your router.)
3. Select dwddns.net (default).
4. Enter a name for your DVR and click the CHECK button. If the name is available, the system will display
the following message: “THIS DVR NAME CAN BE USED”. Click SAVE to save all changes.
5. To use your DDNS, open an Internet Explorer page and enter the DDNS in the address bar:
DVRname.dwddns.net:port-number. (Example: http://vmaxa1.dwddns.net:80)
Step 4 – MONITOR YOUR SYSTEM
1. NAVIGATION – use the included USB mouse to navigate around the DVR’s monitoring and Setup pages.
a. To access the MENU BAR – move the mouse’s
cursor to the bottom of the display area to show
the menu bar.
2. Set the DVR’s network settings to match your network’s requirements. It is recommended to set the
network type to DHCP and let the DVR auto-detect the network’s settings, then change the type to Static.
Please contact your Network Administrator for additional information.
b. To access the QUICK MENU OPTIONS –
Right-click anywhere on the screen. This will take
you to the quick menu options, which include:
•
•
•
•
•
•
•
•
Display Mode Options
Start / Stop Sequence View
Start / Stop Panic Recording
Playback and Search Options
Access the Backup Menu Page
Access the Main Menu Page
Shut Down the System
Log off Current User
2. HELP – For your convenience, the HELP button
located at the bottom right of setup screens includes
basic information and explanation of the features and
settings in that page, for on-the-go information.
The VMAX A1™ has been designed to work with
panoramic cameras like Digital Watchdog’s
STAR-LIGHT AHD PANO™ Panoramic camera.
Each sensor is connected to the DVR as an
individual output, resulting in a perfectly stitched
panoramic view across the DVR’s local monitor
or the Pivot™ remote monitoring software.
Rev Date: 2/17
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising